Skip to content

Instantly share code, notes, and snippets.

@neelchauhan

neelchauhan/calix_jtag.txt Secret

Created March 12, 2026 14:49
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save neelchauhan/022718284d9e540badbe8fdc88fbc4bb to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save neelchauhan/022718284d9e540badbe8fdc88fbc4bb to your computer and use it in GitHub Desktop.
Download ZIP
Raw
calix_jtag.txt
HELO
CPUI
L1CI
PLLI
PMCB
HELO
CPUI
L1CI
4.1605xponpatch2-12.2.21-118.5
DRAM
----
PHYS
ZQDN
PHYE
DINT
TST1
TST2
PASS
----
ZBSS
L12F
MAIN
FPS0
S004
B004
0001
S005
B005
0257
NAN3
RFS2
NAN5
Base: 4.16_05xponpatch2
CFE version 12.2.21-118.5 for BCM96838 (32bit,SP,BE)
Build Date: Tue May 9 13:42:05 CDT 2017 (swbuild@min-premcov)
Copyright (C) 2000-2015 Broadcom Corporation.
Boot Strap Register: 0x800078ff
Chip ID: BCM68385C_B0, MIPS: 240MHz, DDR: 333MHz, Bus: 240MHz
RDP: 600MHz
Main Thread: TP0
Total Memory: 268435456 bytes (256MB)
Boot Address: 0xbfc00000
NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes
NAND flash device: MXIC MX30LF1G18AC, id 0xc2f1 block 128KB size 131072KB
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host/tftp (f/h/c) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Default host ramdisk file name :
Default ramdisk store address :
Board Id (0-15) : 803GP
Number of MAC Addresses (1-32) : 3
Base MAC Address : 44:65:7f:81:xx:xx
PSI Size (1-128) KBytes : 64
Enable Backup PSI [0|1] : 0
System Log Size (0-256) KBytes : 0
Auxillary File System Size Percent: 0
Main Thread Number [0|1] : 0
GPON Serial Number : "CXNK0065xxxx"
GPON Password : " "
MC memory allocation (MB) : 4
TM memory allocation (MB) : 20
DHD 0 memory allocation (MB) : 0
DHD 1 memory allocation (MB) : 0
DHD 2 memory allocation (MB) : 0
WLan Feature : 0x00
Voice Board Configuration (0-2) : LE9540
Partition 1 Size (MB) : 0M
Partition 2 Size (MB) : 0M
Partition 3 Size (MB) : 0M
Partition 4 Size (MB) (Data) : 0M
enable IH Wan-Wan forwarding...
data_path_go Done!!
Creating CPU ring for queue number 0 with 32 packets descriptor=0x80a7f728
Done initializing Ring 0 Base=0xa2615240K End=0xa2615440K calculated entries= 32 RDD Base=0x02615240K descriptor=0x80a7f728
Open PHY 1 on MAC 0 : link state = Down
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 111
CFE>
web info: Waiting for connection on socket 0.
CFE> ?
Invalid command: "?"
Available commands: x, find, comp, fb, dn, phy, sm, dm, db, dh, dw, w, e, ws, r, p, c, i, a, ngx, b, reset, pmdio, spi, force, led, memtest, help
*** command status = -1
CFE> help
Available commands:
x Change extra partitions size
find Find string in NAND
comp Compare NAND blocks
fb Find NAND bad blocks
dn Dump NAND contents along with spare area
phy Set memory or registers.
sm Set memory or registers.
dm Dump memory or registers.
db Dump bytes.
dh Dump half-words.
dw Dump words.
w Write the whole image start from beginning of the flash
e Erase NAND flash
ws Write whole image (priviously loaded by kermit or JTAG) to flash .
r Run program from flash image or from host depend on [f/h] flag
p Print boot line and board parameter info
c Change booline parameters
i Erase persistent storage data
a Change board AFE ID
ngx Change Calix board parameters
b Change board parameters
reset Reset the board
pmdio Pseudo MDIO access for external switches.
spi Legacy SPI access of external switch.
force override chipid check for images.
led verify shift-register LED
memtest Test memory.
help Obtain help for CFE commands
For more information about a command, enter 'help command-name'
*** command status = 0
CFE> b
Press: <enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
844G-1_SG ------ 0
844G-2_SG ------ 1
854G-1_SG ------ 2
854G-2_SG ------ 3
844E-1 ------ 4
844E-2 ------ 5
844GE-1 ------ 6
844GE-2 ------ 7
801GP ------ 8
803GP ------ 9
812G-1 ------ 10
812G-2 ------ 11
813G-1 ------ 12
813G-2 ------ 13
716GE ------ 14
818G ------ 15
Board Id (0-15) : 9 PHY 0 on MAC 0 : link state = Down
PHY 0 on MAC 0 : link state = Down
PHY 0 on MAC 0 : link state = Down
PHY 0 on MAC 0 : link state = Down
Number of MAC Addresses (1-32) : 3
Base MAC Address : 44:65:7f:81:xx:xx
PSI Size (1-128) KBytes : 64
Enable Backup PSI [0|1] : 0
System Log Size (0-256) KBytes : 0
Auxillary File System Size Percent: 0
Main Thread Number [0|1] : 0
MC memory allocation (MB) : 4
TM memory allocation (MB) : 20
DHD 0 memory allocation (MB) : 0
DHD 1 memory allocation (MB) : 0
DHD 2 memory allocation (MB) : 0
Press: <enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
GPON Serial Number : CXNK0065xxxx
GPON Password :
Press: <enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
WLan Feature : 0x00
Press: <enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
NOSLIC -- 0
LE9540 -- 1
LE9541 -- 2
Voice Board Configuration (0-2) : 1
Press: <enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
Partition 1 Size (MB) : 0M
Partition 2 Size (MB) : 0M
Partition 3 Size (MB) : 0M
Partition 4 Size (MB) (Data) : 0M
*** command status = 0
CFE>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment