Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.36 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13136-ad27c133eb)) #0 SMP Thu Apr 30 19:51:12 2020
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Netgear Nighthawk X4 R7500v2
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] Normal zone: 1080 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 15 pages/cpu s30028 r8192 d23220 u61440
[ 0.000000] pcpu-alloc: s30028 r8192 d23220 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 121800
[ 0.000000] Kernel command line: rootfstype=squashfs noinitrd
[ 0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 474840K/491520K available (6103K kernel code, 192K rwdata, 1540K rodata, 1024K init, 236K bss, 16680K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x340/0x4ec with crng_init=0
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000007] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000021] Switching to timer-based delay loop, resolution 160ns
[ 0.000239] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000260] pid_max: default: 32768 minimum: 301
[ 0.000467] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000485] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001524] CPU: Testing write buffer coherency: ok
[ 0.002679] Setting up static identity map for 0x42300000 - 0x42300060
[ 0.002854] rcu: Hierarchical SRCU implementation.
[ 0.003341] smp: Bringing up secondary CPUs ...
[ 0.005242] smp: Brought up 1 node, 2 CPUs
[ 0.005259] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.005270] CPU: All CPU(s) started in SVC mode.
[ 0.015210] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.015365] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.015394] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.015566] pinctrl core: initialized pinctrl subsystem
[ 0.016734] NET: Registered protocol family 16
[ 0.017054] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.018439] cpuidle: using governor ladder
[ 0.018507] cpuidle: using governor menu
[ 0.056209] usbcore: registered new interface driver usbfs
[ 0.056302] usbcore: registered new interface driver hub
[ 0.056386] usbcore: registered new device driver usb
[ 0.056446] pps_core: LinuxPPS API ver. 1 registered
[ 0.056459] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.056500] PTP clock support registered
[ 0.058205] clocksource: Switched to clocksource dg_timer
[ 0.059121] thermal_sys: Registered thermal governor 'step_wise'
[ 0.061558] NET: Registered protocol family 2
[ 0.062476] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.062521] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.062566] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.062619] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.062728] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.062760] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.062992] NET: Registered protocol family 1
[ 0.063044] PCI: CLS 0 bytes, default 64
[ 0.064366] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.071345] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.071362] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.111210] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
[ 0.111352] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.111459] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.111743] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
[ 0.111771] qcom-pcie 1b500000.pci: Parsing ranges property...
[ 0.111818] qcom-pcie 1b500000.pci: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.111856] qcom-pcie 1b500000.pci: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.333871] qcom-pcie 1b500000.pci: Link up
[ 0.334041] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.334064] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.334086] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.334103] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.334120] pci_bus 0000:00: scanning bus
[ 0.334169] pci 0000:00:00.0: [17cb:0101] type 01 class 0xff0000
[ 0.334340] pci 0000:00:00.0: supports D1
[ 0.334354] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.334374] pci 0000:00:00.0: PME# disabled
[ 0.338086] pci_bus 0000:00: fixups for bus
[ 0.338113] PCI: bus0: Fast back to back transfers disabled
[ 0.338140] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 0.338276] pci_bus 0000:01: scanning bus
[ 0.338562] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.338918] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.340068] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.340115] pci 0000:01:00.0: PME# disabled
[ 0.343964] pci_bus 0000:01: fixups for bus
[ 0.344038] PCI: bus1: Fast back to back transfers disabled
[ 0.344055] pci_bus 0000:01: bus scan returning with max=01
[ 0.344074] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 0.344093] pci_bus 0000:00: bus scan returning with max=ff
[ 0.344130] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[ 0.344156] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.344284] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.344310] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.344518] pcieport 0000:00:00.0: assign IRQ: got 35
[ 0.345289] pcieport 0000:00:00.0: AER: enabled with IRQ 36
[ 0.345877] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
[ 0.346007] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.346140] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.346406] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
[ 0.346427] qcom-pcie 1b700000.pci: Parsing ranges property...
[ 0.346465] qcom-pcie 1b700000.pci: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.346500] qcom-pcie 1b700000.pci: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.575635] qcom-pcie 1b700000.pci: Link up
[ 0.575788] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.575809] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.575825] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.575841] pci_bus 0001:00: scanning bus
[ 0.575883] pci 0001:00:00.0: [17cb:0101] type 01 class 0xff0000
[ 0.576029] pci 0001:00:00.0: supports D1
[ 0.576044] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.576061] pci 0001:00:00.0: PME# disabled
[ 0.579814] pci_bus 0001:00: fixups for bus
[ 0.579837] PCI: bus0: Fast back to back transfers disabled
[ 0.579855] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 0.579974] pci_bus 0001:01: scanning bus
[ 0.580162] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.580541] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.581776] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.581825] pci 0001:01:00.0: PME# disabled
[ 0.582079] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0001:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[ 0.585716] pci_bus 0001:01: fixups for bus
[ 0.585795] PCI: bus1: Fast back to back transfers disabled
[ 0.585810] pci_bus 0001:01: bus scan returning with max=01
[ 0.585827] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 0.585844] pci_bus 0001:00: bus scan returning with max=ff
[ 0.585870] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.585894] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.586029] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.586050] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.586245] pcieport 0001:00:00.0: assign IRQ: got 37
[ 0.586916] pcieport 0001:00:00.0: AER: enabled with IRQ 38
[ 0.589575] L2 @ QSB rate. Forcing new rate.
[ 0.589804] L2 @ 384000 KHz
[ 0.589988] CPU0 @ 800000 KHz
[ 0.590002] CPU1 @ QSB rate. Forcing new rate.
[ 0.590133] CPU1 @ 384000 KHz
[ 0.593937] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.596177] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.598768] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.598823] msm_serial 16340000.serial: uartclk = 7372800
[ 0.598903] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 39, base_baud = 460800) is a MSM
[ 0.598940] msm_serial: console setup on port #0
[ 1.367816] printk: console [ttyMSM0] enabled
[ 1.372936] msm_serial: driver initialized
[ 1.382303] loop: module loaded
[ 1.383898] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xa1
[ 1.384256] nand: Micron MT29F1G08ABBEAH4
[ 1.390940] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.394865] 8 fixed-partitions partitions found on MTD device qcom_nand.0
[ 1.402306] Creating 8 MTD partitions on "qcom_nand.0":
[ 1.409156] 0x000000000000-0x000000c80000 : "qcadata"
[ 1.419359] random: fast init done
[ 1.435528] 0x000000c80000-0x000001180000 : "APPSBL"
[ 1.444662] 0x000001180000-0x000001200000 : "APPSBLENV"
[ 1.446453] 0x000001200000-0x000001340000 : "art"
[ 1.451781] 0x000001340000-0x000001480000 : "artbak"
[ 1.456533] 0x000001480000-0x000001880000 : "kernel"
[ 1.466110] 0x000001880000-0x000007900000 : "ubi"
[ 1.624544] 0x000007900000-0x000008000000 : "reserve"
[ 1.638691] libphy: ipq8064_mdio_bus: probed
[ 1.688644] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio-mii
[ 2.791660] ar8327: qca,phy-rgmii-en is not specified
[ 2.792079] libphy: Fixed MDIO Bus: probed
[ 2.796321] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_wake_irq not found
[ 2.799803] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_lpi not found
[ 2.807670] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
[ 2.814080] ipq806x-gmac-dwmac 37200000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[ 2.819936] ipq806x-gmac-dwmac 37200000.ethernet: DWMAC1000
[ 2.827295] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
[ 2.833206] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
[ 2.840909] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
[ 2.848814] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
[ 2.854549] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
[ 2.861998] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
[ 2.868774] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
[ 2.876253] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
[ 2.883365] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.890440] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
[ 2.898128] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
[ 2.905423] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
[ 2.912072] ipq806x-gmac-dwmac 37400000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[ 2.918096] ipq806x-gmac-dwmac 37400000.ethernet: DWMAC1000
[ 2.925641] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
[ 2.931451] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
[ 2.939159] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
[ 2.946995] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
[ 2.952872] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
[ 2.960276] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
[ 2.966963] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
[ 2.974586] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
[ 2.981613] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.988822] i2c /dev entries driver
[ 2.998735] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 2.999798] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 3.007566] sdhci: Secure Digital Host Controller Interface driver
[ 3.014261] sdhci: Copyright(c) Pierre Ossman
[ 3.020504] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.027640] NET: Registered protocol family 10
[ 3.033678] Segment Routing with IPv6
[ 3.034923] NET: Registered protocol family 17
[ 3.038743] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 3.045248] 8021q: 802.1Q VLAN Support v1.8
[ 3.056184] Registering SWP/SWPB emulation handler
[ 3.082448] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 3.095187] s1a: supplied by regulator-dummy
[ 3.095289] s1a: Bringing 0uV into 1050000-1050000uV
[ 3.098903] s1b: supplied by regulator-dummy
[ 3.103536] s1b: Bringing 0uV into 1050000-1050000uV
[ 3.108005] s2a: supplied by regulator-dummy
[ 3.112828] s2a: Bringing 0uV into 800000-800000uV
[ 3.117168] s2b: supplied by regulator-dummy
[ 3.121669] s2b: Bringing 0uV into 800000-800000uV
[ 3.127623] Speed bin: 0
[ 3.130631] PVS bin: 0
[ 3.140981] UBI: auto-attach mtd6
[ 3.141004] ubi0: attaching mtd6
[ 3.205510] random: crng init done
[ 3.842258] ubi0: scanning is finished
[ 3.852743] ubi0: attached mtd6 (name "ubi", size 96 MiB)
[ 3.852762] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.857114] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.863959] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.870788] ubi0: good PEBs: 772, bad PEBs: 0, corrupted PEBs: 0
[ 3.877511] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 3.883818] ubi0: max/mean erase counter: 9/4, WL threshold: 4096, image sequence number: 1478863427
[ 3.890844] ubi0: available PEBs: 0, total reserved PEBs: 772, PEBs reserved for bad PEB handling: 20
[ 3.900924] block ubiblock0_0: created from ubi0:0(rootfs)
[ 3.901154] ubi0: background thread "ubi_bgt0d" started, PID 92
[ 3.909245] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 3.909252] hctosys: unable to open rtc device (rtc0)
[ 3.935931] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 3.939201] Freeing unused kernel memory: 1024K
[ 3.970001] Run /sbin/init as init process
[ 4.711913] init: Console is alive
[ 4.712302] init: - watchdog -
[ 5.806808] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 5.954859] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.958420] SCSI subsystem initialized
[ 5.966158] libata version 3.00 loaded.
[ 5.968380] ahci 29000000.sata: 29000000.sata supply ahci not found, using dummy regulator
[ 5.968566] ahci 29000000.sata: 29000000.sata supply phy not found, using dummy regulator
[ 5.975602] ahci 29000000.sata: 29000000.sata supply target not found, using dummy regulator
[ 5.986270] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 5.992393] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 5.997586] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 6.007861] scsi host0: ahci
[ 6.014692] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 26
[ 6.349085] ata1: SATA link down (SStatus 0 SControl 300)
[ 6.355741] ehci-fsl: Freescale EHCI Host controller driver
[ 6.357367] ehci-platform: EHCI generic platform driver
[ 6.366094] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.366813] ohci-platform: OHCI generic platform driver
[ 6.374235] dwc3-qcom 110f8800.usb3: IRQ hs_phy_irq not found
[ 6.376708] dwc3-qcom 110f8800.usb3: IRQ dp_hs_phy_irq not found
[ 6.382711] dwc3-qcom 110f8800.usb3: IRQ dm_hs_phy_irq not found
[ 6.388779] dwc3-qcom 110f8800.usb3: IRQ ss_phy_irq not found
[ 6.396803] dwc3-qcom 100f8800.usb3: IRQ hs_phy_irq not found
[ 6.400401] dwc3-qcom 100f8800.usb3: IRQ dp_hs_phy_irq not found
[ 6.406044] dwc3-qcom 100f8800.usb3: IRQ dm_hs_phy_irq not found
[ 6.412219] dwc3-qcom 100f8800.usb3: IRQ ss_phy_irq not found
[ 6.422165] dwc3 11000000.dwc3: Failed to get clk 'ref': -2
[ 6.480252] dwc3 10000000.dwc3: Failed to get clk 'ref': -2
[ 6.539388] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 6.539452] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 6.543972] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[ 6.551489] xhci-hcd xhci-hcd.0.auto: irq 43, io mem 0x11000000
[ 6.561944] hub 1-0:1.0: USB hub found
[ 6.566653] hub 1-0:1.0: 1 port detected
[ 6.570774] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 6.574503] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 6.579872] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 6.587445] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.594453] hub 2-0:1.0: USB hub found
[ 6.604142] hub 2-0:1.0: 1 port detected
[ 6.606034] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 6.609898] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 6.615261] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[ 6.622789] xhci-hcd xhci-hcd.1.auto: irq 44, io mem 0x10000000
[ 6.632677] hub 3-0:1.0: USB hub found
[ 6.637977] hub 3-0:1.0: 1 port detected
[ 6.642037] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 6.645855] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 6.651222] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 6.658849] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.665628] hub 4-0:1.0: USB hub found
[ 6.673651] hub 4-0:1.0: 1 port detected
[ 6.680273] usbcore: registered new interface driver usb-storage
[ 6.684224] usbcore: registered new interface driver uas
[ 6.687255] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 6.701692] init: - preinit -
[ 8.938971] dwmac1000: Master AXI performs any burst length
[ 8.939029] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
[ 8.943374] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 8.951694] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 8.960468] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
[ 8.968935] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 8.977000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 13.221351] mount_root: loading kmods from internal overlay
[ 13.254518] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 13.256085] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 13.294742] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[ 13.295797] blk_update_request: I/O error, dev mtdblock0, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0
[ 13.305470] blk_update_request: I/O error, dev mtdblock0, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 13.316286] blk_update_request: I/O error, dev mtdblock0, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 13.326810] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 13.336512] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 13.420554] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 13.420588] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 13.431134] blk_update_request: I/O error, dev mtdblock1, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 13.438133] blk_update_request: I/O error, dev mtdblock1, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 13.449129] blk_update_request: I/O error, dev mtdblock1, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 13.459684] blk_update_request: I/O error, dev mtdblock1, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 13.470398] Buffer I/O error on dev mtdblock1, logical block 0, async page read
[ 13.483299] Buffer I/O error on dev mtdblock1, logical block 0, async page read
[ 13.660673] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 13.662265] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 186
[ 13.712008] UBIFS (ubi0:1): recovery needed
[ 14.147574] UBIFS (ubi0:1): recovery completed
[ 14.147668] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 14.151015] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 14.158889] UBIFS (ubi0:1): FS size: 80883712 bytes (77 MiB, 637 LEBs), journal size 4063232 bytes (3 MiB, 32 LEBs)
[ 14.168793] UBIFS (ubi0:1): reserved for root: 3820337 bytes (3730 KiB)
[ 14.179011] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 35AF1C51-8EC2-4379-A6DF-A6A6B57DC60E, small LPT model
[ 14.186498] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 14.198993] block: extroot: not configured
[ 14.206364] UBIFS (ubi0:1): un-mount UBI device 0
[ 14.208023] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 14.216679] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 14.220487] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 187
[ 14.312196] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 14.312223] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 14.319085] UBIFS (ubi0:1): FS size: 80883712 bytes (77 MiB, 637 LEBs), journal size 4063232 bytes (3 MiB, 32 LEBs)
[ 14.328976] UBIFS (ubi0:1): reserved for root: 3820337 bytes (3730 KiB)
[ 14.339190] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 35AF1C51-8EC2-4379-A6DF-A6A6B57DC60E, small LPT model
[ 14.359029] mount_root: loading kmods from internal overlay
[ 14.377757] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 14.379769] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 14.396073] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 14.399603] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 14.407500] Buffer I/O error on dev mtdblock1, logical block 0, async page read
[ 14.412470] Buffer I/O error on dev mtdblock1, logical block 0, async page read
[ 14.579258] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 14.583761] block: extroot: not configured
[ 14.588901] mount_root: switching to ubifs overlay
[ 14.610348] overlayfs: upper fs does not support xattr, falling back to index=off and metacopy=off.
[ 14.614766] urandom-seed: Seeding with /etc/urandom.seed
[ 14.687677] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Down
[ 14.735888] procd: - early -
[ 14.736011] procd: - watchdog -
[ 15.324757] procd: - watchdog -
[ 15.324986] procd: - ubus -
[ 15.482799] procd: - init -
[ 16.047051] kmodloader: loading kernel modules from /etc/modules.d/*
[ 16.058220] urngd: v1.0.2 started.
[ 16.154860] NET: Registered protocol family 38
[ 16.168059] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 16.177702] NET: Registered protocol family 15
[ 16.190463] Initializing XFRM netlink socket
[ 16.214375] Mirror/redirect action on
[ 16.218245] u32 classifier
[ 16.218260] input device check on
[ 16.219899] Actions configured
[ 16.228132] Loading modules backported from Linux version v5.4.27-0-g585e0cc08069
[ 16.228156] Backport generated by backports.git v5.4.27-1-0-gf6e8852f
[ 16.249995] usbcore: registered new interface driver ums-alauda
[ 16.250620] usbcore: registered new interface driver ums-cypress
[ 16.255334] usbcore: registered new interface driver ums-datafab
[ 16.261624] usbcore: registered new interface driver ums-freecom
[ 16.267586] usbcore: registered new interface driver ums-isd200
[ 16.290927] usbcore: registered new interface driver ums-jumpshot
[ 16.292025] usbcore: registered new interface driver ums-karma
[ 16.297474] usbcore: registered new interface driver ums-sddr09
[ 16.303173] usbcore: registered new interface driver ums-sddr55
[ 16.309068] usbcore: registered new interface driver ums-usbat
[ 16.323787] xt_time: kernel timezone is -0000
[ 16.324525] usbcore: registered new interface driver cdc_ether
[ 16.392261] PPP generic driver version 2.4.2
[ 16.393308] NET: Registered protocol family 24
[ 16.396556] usbcore: registered new interface driver rndis_host
[ 16.438989] ath10k_pci 0000:01:00.0: assign IRQ: got 35
[ 16.439011] ath10k 5.1 driver, optimized for CT firmware, probing pci device: 0x40.
[ 16.442624] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 16.445527] ath10k_pci 0000:01:00.0: enabling bus mastering
[ 16.446069] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 17.100326] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[ 17.100377] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 17.111705] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9980-tH-013-d81f62d97 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,htt-mgt-CT,set-special-CT,no-bmiss-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 e13e5650
[ 17.183758] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:1 crc32 08fa09f2
[ 18.318225] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
[ 18.321637] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 18.323646] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[ 18.402017] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 18.402052] ath10k_pci 0000:01:00.0: wmi print 'free: 48544 iram: 21284 sram: 30852'
[ 18.677267] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 18.771005] ath: EEPROM regdomain: 0x0
[ 18.771019] ath: EEPROM indicates default country code should be used
[ 18.771030] ath: doing EEPROM country->regdmn map search
[ 18.771047] ath: country maps to regdmn code: 0x3a
[ 18.771060] ath: Country alpha2 being used: US
[ 18.771069] ath: Regpair used: 0x3a
[ 18.776942] ath10k_pci 0001:01:00.0: assign IRQ: got 37
[ 18.776982] ath10k 5.1 driver, optimized for CT firmware, probing pci device: 0x40.
[ 18.778394] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 18.783566] ath10k_pci 0001:01:00.0: enabling bus mastering
[ 18.784384] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 19.188840] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[ 19.188871] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 19.198777] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9980-tH-013-d81f62d97 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,htt-mgt-CT,set-special-CT,no-bmiss-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 e13e5650
[ 19.273648] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:2 crc32 08fa09f2
[ 20.412273] ath10k_pci 0001:01:00.0: unsupported HTC service id: 1536
[ 20.415441] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 20.417691] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
[ 20.498447] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 20.498485] ath10k_pci 0001:01:00.0: wmi print 'free: 48544 iram: 21284 sram: 30852'
[ 20.781734] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 20.880936] ath: EEPROM regdomain: 0x0
[ 20.880948] ath: EEPROM indicates default country code should be used
[ 20.880959] ath: doing EEPROM country->regdmn map search
[ 20.880976] ath: country maps to regdmn code: 0x3a
[ 20.880989] ath: Country alpha2 being used: US
[ 20.880998] ath: Regpair used: 0x3a
[ 20.900818] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 23.640465] print_req_error: 14 callbacks suppressed
[ 23.640473] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[ 23.645398] blk_update_request: I/O error, dev mtdblock0, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0
[ 23.655975] blk_update_request: I/O error, dev mtdblock0, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 23.666872] blk_update_request: I/O error, dev mtdblock0, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 23.677387] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 23.687201] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 23.702611] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 23.704750] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 23.716507] blk_update_request: I/O error, dev mtdblock1, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[ 23.723504] blk_update_request: I/O error, dev mtdblock1, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0
[ 23.734235] blk_update_request: I/O error, dev mtdblock1, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 23.744923] blk_update_request: I/O error, dev mtdblock1, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 23.755649] Buffer I/O error on dev mtdblock1, logical block 0, async page read
[ 23.768989] Buffer I/O error on dev mtdblock1, logical block 0, async page read
[ 24.475989] dwmac1000: Master AXI performs any burst length
[ 24.476020] ipq806x-gmac-dwmac 37200000.ethernet eth0: No Safety Features support found
[ 24.480455] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 24.488555] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 24.497390] ipq806x-gmac-dwmac 37200000.ethernet eth0: configuring for fixed/rgmii link mode
[ 24.505500] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 24.517512] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.524080] br-guestWLAN: port 1(eth0.2) entered blocking state
[ 24.527763] br-guestWLAN: port 1(eth0.2) entered disabled state
[ 24.533944] device eth0.2 entered promiscuous mode
[ 24.539648] device eth0 entered promiscuous mode
[ 24.545892] br-guestWLAN: port 1(eth0.2) entered blocking state
[ 24.549269] br-guestWLAN: port 1(eth0.2) entered forwarding state
[ 24.603196] dwmac1000: Master AXI performs any burst length
[ 24.603227] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
[ 24.607589] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 24.615783] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 24.624688] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
[ 24.631662] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 24.641334] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 24.651655] br-lan: port 1(eth1.1) entered blocking state
[ 24.654966] br-lan: port 1(eth1.1) entered disabled state
[ 24.660976] device eth1.1 entered promiscuous mode
[ 24.665953] device eth1 entered promiscuous mode
[ 24.672764] br-lan: port 1(eth1.1) entered blocking state
[ 24.675372] br-lan: port 1(eth1.1) entered forwarding state
[ 24.753411] br-lan: port 2(eth0.3) entered blocking state
[ 24.753443] br-lan: port 2(eth0.3) entered disabled state
[ 24.760813] device eth0.3 entered promiscuous mode
[ 24.763300] br-lan: port 2(eth0.3) entered blocking state
[ 24.767857] br-lan: port 2(eth0.3) entered forwarding state
[ 24.898707] br-lan: received packet on eth0.3 with own address as source address (addr:XX:XX:XX:XX:08:59, vlan:0)
[ 24.958919] br-lan: received packet on eth0.3 with own address as source address (addr:XX:XX:XX:XX:08:59, vlan:0)
[ 24.959011] IPv6: br-lan: IPv6 duplicate address fe80::IPv6:XXXX:XXXX:859 used by XX:XX:XX:XX:08:59 detected!
[ 25.528595] IPv6: ADDRCONF(NETDEV_CHANGE): br-guestWLAN: link becomes ready
[ 26.008777] br-lan: received packet on eth0.3 with own address as source address (addr:XX:XX:XX:XX:08:59, vlan:0)
[ 26.038580] br-lan: received packet on eth0.3 with own address as source address (addr:XX:XX:XX:XX:08:59, vlan:0)
[ 26.058719] br-lan: received packet on eth0.3 with own address as source address (addr:XX:XX:XX:XX:08:59, vlan:0)
[ 26.188663] br-lan: received packet on eth0.3 with own address as source address (addr:XX:XX:XX:XX:08:59, vlan:0)
[ 27.270234] ath10k_pci 0001:01:00.0: unsupported HTC service id: 1536
[ 27.270679] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 27.275661] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
[ 27.356449] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 27.356554] ath10k_pci 0001:01:00.0: wmi print 'free: 48544 iram: 21284 sram: 30852'
[ 27.762044] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 27.769272] br-lan: port 3(wlan1) entered blocking state
[ 27.771990] br-lan: port 3(wlan1) entered disabled state
[ 27.777707] device wlan1 entered promiscuous mode
[ 27.782926] br-lan: port 3(wlan1) entered blocking state
[ 27.787350] br-lan: port 3(wlan1) entered forwarding state
[ 27.797683] br-lan: port 3(wlan1) entered disabled state
[ 27.871861] ath10k_pci 0001:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
[ 28.230267] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 28.230622] br-lan: port 3(wlan1) entered blocking state
[ 28.235716] br-lan: port 3(wlan1) entered forwarding state
[ 28.322539] ath10k_pci 0001:01:00.0: wmi: fixing invalid VHT TX rate code 0xff
[ 29.467635] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
[ 29.467936] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 29.473134] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[ 29.551436] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 29.551561] ath10k_pci 0000:01:00.0: wmi print 'free: 48544 iram: 21284 sram: 30852'
[ 29.997276] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 30.005540] br-lan: port 4(wlan0) entered blocking state
[ 30.007239] br-lan: port 4(wlan0) entered disabled state
[ 30.013476] device wlan0 entered promiscuous mode
[ 30.027490] br-guestWLAN: port 2(wlan1-1) entered blocking state
[ 30.027544] br-guestWLAN: port 2(wlan1-1) entered disabled state
[ 30.033220] device wlan1-1 entered promiscuous mode
[ 30.044288] br-guestWLAN: port 2(wlan1-1) entered blocking state
[ 30.044317] br-guestWLAN: port 2(wlan1-1) entered forwarding state
[ 30.130185] ath10k_pci 0001:01:00.0: failed to pull fw stats: -71
[ 31.144522] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
[ 31.554391] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 31.554734] br-lan: port 4(wlan0) entered blocking state
[ 31.560011] br-lan: port 4(wlan0) entered forwarding state
[ 31.573992] br-guestWLAN: port 3(wlan0-1) entered blocking state
[ 31.574029] br-guestWLAN: port 3(wlan0-1) entered disabled state
[ 31.579416] device wlan0-1 entered promiscuous mode
[ 31.603348] br-guestWLAN: port 3(wlan0-1) entered blocking state
[ 31.603376] br-guestWLAN: port 3(wlan0-1) entered forwarding state
[ 31.685840] ath10k_pci 0000:01:00.0: failed to pull fw stats: -71
[ 32.735131] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[ 9522.887556] ath10k_pci 0001:01:00.0: htt tx: fixing invalid VHT TX rate code 0xff
[12478.053721] ------------[ cut here ]------------
[12478.053766] WARNING: CPU: 0 PID: 2380 at include/linux/syscalls.h:267 addr_limit_check_failed+0x48/0x5c
[12478.057409] Invalid address limit on user-mode return
[12478.057413] Modules linked in: xt_connlimit pppoe ppp_async nf_coHOST_WWWount iptable_nat ath10k_pci ath10k_core ath xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD xt_CT rndis_host pppox ppp_generic nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack mac80211 ipt_REJECT cfg80211 cdc_ether xt_time xt_tcpudp xt_tcpmss xt_statistic xt_recent xt_policy xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_esp xt_ecn xt_dscp xt_comment xt_TCPMSS xt_LOG xt_HL xt_DSCP xt_CLASSIFY usbnet ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda slhc sch_cake nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables crc_ccitt compat sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport ledtrig_heartbeat
[12478.066805] nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ifb ipcomp6 xfrm6_tunnel esp6 ah6 xfrm4_tunnel ipcomp esp4 ah4 tunnel6 tunnel4 xfrm_user xfrm_ipcomp af_key xfrm_algo vfat fat ntfs nls_utf8 nls_iso8859_1 nls_cp437 crypto_user algif_skcipher algif_rng algif_hash algif_aead af_alg sha1_generic md5 echainiv des_generic libdes cbc authenc uas usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom ohci_platform ohci_hcd phy_qcom_dwc3 ahci fsl_mph_dr_of ehci_platform ehci_fsl sd_mod ahci_platform libahci_platform libahci libata scsi_mod ehci_hcd gpio_button_hotplug f2fs ext4 mbcache jbd2 crc32c_generic crc32_generic
[12478.197770] CPU: 0 PID: 2380 Comm: kworker/0:0 Not tainted 5.4.36 #0
[12478.219994] Hardware name: Generic DT based system
[12478.226350] Workqueue: events dbs_work_handler
[12478.230947] [<c030f954>] (unwind_backtrace) from [<c030b96c>] (show_stack+0x14/0x20)
[12478.235381] [<c030b96c>] (show_stack) from [<c08d8760>] (dump_stack+0x94/0xa8)
[12478.243280] [<c08d8760>] (dump_stack) from [<c031e7b4>] (__warn+0xb4/0xd0)
[12478.250306] [<c031e7b4>] (__warn) from [<c031e850>] (warn_slowpath_fmt+0x80/0x90)
[12478.257160] [<c031e850>] (warn_slowpath_fmt) from [<c030b358>] (addr_limit_check_failed+0x48/0x5c)
[12478.264713] [<c030b358>] (addr_limit_check_failed) from [<c0301090>] (ret_to_user_from_irq+0xc/0x18)
[12478.273561] Exception stack(0xd7f35ce8 to 0xd7f35d30)
[12478.282857] 5ce0: c0c61610 00001610 00000c37 00000001 dd59c9d8 00000001
[12478.287813] 5d00: 20000013 d7f35da4 00000002 00000000 ffffffff dce02d00 00000000 b6cd5c38
[12478.295962] 5d20: b6f505cc c08f5844 60000010 ffffffff
[12478.304109] ---[ end trace 5092b75360ffb193 ]---
@greearb

This comment has been minimized.

Copy link

@greearb greearb commented May 3, 2020

I'm pretty sure this is not ath10k related. Seems some mem corruption or something like that?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.