Created
October 3, 2016 16:23
-
-
Save notro/091d440631df462e6c0510bd1d431722 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
--- /dev/fd/63 2016-10-03 16:20:14.288032107 +0200 | |
+++ /dev/fd/62 2016-10-03 16:20:14.288032107 +0200 | |
@@ -18,8 +18,8 @@ | |
i2c0_baudrate = "", "", "", "!clock-frequency:0"; | |
i2c1 = "", "", "", "\"status"; | |
i2c1_baudrate = "", "", "", "\"clock-frequency:0"; | |
- i2c2_baudrate = [00 00 00 12 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00]; | |
- i2c2_iknowwhatimdoing = [00 00 00 12 73 74 61 74 75 73 00]; | |
+ i2c2_baudrate = [00 00 00 10 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00]; | |
+ i2c2_iknowwhatimdoing = [00 00 00 10 73 74 61 74 75 73 00]; | |
i2s = [00 00 00 1f 73 74 61 74 75 73 00]; | |
random = "", "", "", "&status"; | |
sd_debug = "", "", "", "'brcm,debug"; | |
@@ -35,7 +35,6 @@ | |
aliases { | |
audio = "/soc/audio"; | |
aux = "/soc/aux@0x7e215000"; | |
- clocks = "/clocks"; | |
dma = "/soc/dma@7e007000"; | |
fb = "/soc/fb"; | |
gpio = "/soc/gpio@7e200000"; | |
@@ -44,7 +43,7 @@ | |
i2c2 = "/soc/i2c@7e805000"; | |
i2s = "/soc/i2s@7e203000"; | |
intc = "/soc/interrupt-controller@7e00b200"; | |
- leds = "/soc/leds"; | |
+ leds = "/leds"; | |
mailbox = "/soc/mailbox@7e00b800"; | |
mmc = "/soc/mmc@7e300000"; | |
random = "/soc/rng@7e104000"; | |
@@ -53,7 +52,7 @@ | |
sound = "/soc/sound"; | |
spi0 = "/soc/spi@7e204000"; | |
spi1 = "/soc/spi@7e215080"; | |
- spi2 = "/soc/spi@7e2150C0"; | |
+ spi2 = "/soc/spi@7e2150c0"; | |
thermal = "/soc/thermal"; | |
uart0 = "/soc/serial@7e201000"; | |
uart1 = "/soc/serial@7e215040"; | |
@@ -66,19 +65,19 @@ | |
bootargs = "8250.nr_uarts=1"; | |
}; | |
- clocks: clocks { | |
+ clocks { | |
#address-cells = <0x1>; | |
#size-cells = <0x0>; | |
compatible = "simple-bus"; | |
- clk_osc: clock@6 { | |
+ clk_osc: clock@3 { | |
#clock-cells = <0x0>; | |
clock-frequency = <0x124f800>; | |
clock-output-names = "osc"; | |
compatible = "fixed-clock"; | |
linux,phandle = <0x3>; | |
phandle = <0x3>; | |
- reg = <0x6>; | |
+ reg = <0x3>; | |
}; | |
}; | |
@@ -123,6 +122,18 @@ | |
}; | |
}; | |
+ leds: leds { | |
+ compatible = "gpio-leds"; | |
+ | |
+ act_led: act { | |
+ gpios = <0x17 0x0 0x0>; | |
+ label = "led0"; | |
+ linux,default-trigger = "mmc0"; | |
+ linux,phandle = <0x23>; | |
+ phandle = <0x23>; | |
+ }; | |
+ }; | |
+ | |
memory { | |
device_type = "memory"; | |
reg = <0x0 0x0>; | |
@@ -145,7 +156,7 @@ | |
compatible = "brcm,bcm2835-audio"; | |
linux,phandle = <0x24>; | |
phandle = <0x24>; | |
- pinctrl-0 = <0x17>; | |
+ pinctrl-0 = <0x16>; | |
pinctrl-names = "default"; | |
status = "disabled"; | |
}; | |
@@ -154,12 +165,12 @@ | |
#clock-cells = <0x1>; | |
clocks = <0x4 0x14>; | |
compatible = "brcm,bcm2835-aux"; | |
- linux,phandle = <0xe>; | |
- phandle = <0xe>; | |
+ linux,phandle = <0xd>; | |
+ phandle = <0xd>; | |
reg = <0x7e215000 0x8>; | |
}; | |
- cprman: cprman@7e101000 { | |
+ cprman: clocks: cprman@7e101000 { | |
#clock-cells = <0x1>; | |
clocks = <0x3>; | |
compatible = "brcm,bcm2835-cprman"; | |
@@ -209,15 +220,15 @@ | |
gpio-controller; | |
interrupt-controller; | |
interrupts = <0x2 0x11 0x2 0x12>; | |
- linux,phandle = <0xa>; | |
- phandle = <0xa>; | |
+ linux,phandle = <0xb>; | |
+ phandle = <0xb>; | |
reg = <0x7e200000 0xb4>; | |
audio_pins: audio_pins { | |
brcm,function = <0x4>; | |
brcm,pins = <0x28 0x29>; | |
- linux,phandle = <0x17>; | |
- phandle = <0x17>; | |
+ linux,phandle = <0x16>; | |
+ phandle = <0x16>; | |
}; | |
bt_pins: bt_pins { | |
@@ -231,51 +242,51 @@ | |
i2c0_pins: i2c0 { | |
brcm,function = <0x4>; | |
brcm,pins = <0x0 0x1>; | |
- linux,phandle = <0xd>; | |
- phandle = <0xd>; | |
+ linux,phandle = <0xc>; | |
+ phandle = <0xc>; | |
}; | |
i2c1_pins: i2c1 { | |
brcm,function = <0x4>; | |
brcm,pins = <0x2 0x3>; | |
- linux,phandle = <0x11>; | |
- phandle = <0x11>; | |
+ linux,phandle = <0xf>; | |
+ phandle = <0xf>; | |
}; | |
i2s_pins: i2s { | |
brcm,function = <0x4>; | |
brcm,pins = <0x12 0x13 0x14 0x15>; | |
- linux,phandle = <0x9>; | |
- phandle = <0x9>; | |
+ linux,phandle = <0x8>; | |
+ phandle = <0x8>; | |
}; | |
sdhost_pins: sdhost_pins { | |
brcm,function = <0x4>; | |
brcm,pins = <0x30 0x31 0x32 0x33 0x34 0x35>; | |
- linux,phandle = <0x8>; | |
- phandle = <0x8>; | |
+ linux,phandle = <0x12>; | |
+ phandle = <0x12>; | |
}; | |
sdio_pins: sdio_pins { | |
brcm,function = <0x7>; | |
brcm,pins = <0x22 0x23 0x24 0x25 0x26 0x27>; | |
brcm,pull = <0x0 0x2 0x2 0x2 0x2 0x2>; | |
- linux,phandle = <0x10>; | |
- phandle = <0x10>; | |
+ linux,phandle = <0x13>; | |
+ phandle = <0x13>; | |
}; | |
spi0_cs_pins: spi0_cs_pins { | |
brcm,function = <0x1>; | |
brcm,pins = <0x8 0x7>; | |
- linux,phandle = <0xc>; | |
- phandle = <0xc>; | |
+ linux,phandle = <0xa>; | |
+ phandle = <0xa>; | |
}; | |
spi0_pins: spi0_pins { | |
brcm,function = <0x4>; | |
brcm,pins = <0x9 0xa 0xb>; | |
- linux,phandle = <0xb>; | |
- phandle = <0xb>; | |
+ linux,phandle = <0x9>; | |
+ phandle = <0x9>; | |
}; | |
uart0_pins: uart0_pins { | |
@@ -290,18 +301,17 @@ | |
brcm,function; | |
brcm,pins; | |
brcm,pull; | |
- linux,phandle = <0xf>; | |
- phandle = <0xf>; | |
+ linux,phandle = <0xe>; | |
+ phandle = <0xe>; | |
}; | |
}; | |
gpiomem { | |
compatible = "brcm,bcm2835-gpiomem"; | |
reg = <0x7e200000 0x1000>; | |
- status = "okay"; | |
}; | |
- gpu: gpu { | |
+ gpu: vc4: gpu { | |
compatible = "brcm,bcm2835-vc4"; | |
status = "disabled"; | |
}; | |
@@ -310,15 +320,17 @@ | |
clock-names = "pixel", "hdmi"; | |
clocks = <0x4 0x10 0x4 0x19>; | |
compatible = "brcm,bcm2835-hdmi"; | |
- ddc = <0x12>; | |
- hpd-gpios = <0xa 0x2e 0x1>; | |
- power-domains = <0x13 0x5>; | |
+ ddc = <0x10>; | |
+ hpd-gpios = <0xb 0x2e 0x1>; | |
+ interrupts = <0x2 0x8 0x2 0x9>; | |
+ power-domains = <0x11 0x5>; | |
reg = <0x7e902000 0x600 0x7e808000 0x100>; | |
status = "disabled"; | |
}; | |
hvs: hvs@7e400000 { | |
compatible = "brcm,bcm2835-hvs"; | |
+ interrupts = <0x2 0x1>; | |
reg = <0x7e400000 0x6000>; | |
status = "disabled"; | |
}; | |
@@ -332,7 +344,7 @@ | |
interrupts = <0x2 0x15>; | |
linux,phandle = <0x21>; | |
phandle = <0x21>; | |
- pinctrl-0 = <0xd>; | |
+ pinctrl-0 = <0xc>; | |
pinctrl-names = "default"; | |
reg = <0x7e205000 0x1000>; | |
status = "disabled"; | |
@@ -347,7 +359,7 @@ | |
interrupts = <0x2 0x15>; | |
linux,phandle = <0x22>; | |
phandle = <0x22>; | |
- pinctrl-0 = <0x11>; | |
+ pinctrl-0 = <0xf>; | |
pinctrl-names = "default"; | |
reg = <0x7e804000 0x1000>; | |
status = "disabled"; | |
@@ -360,8 +372,8 @@ | |
clocks = <0x4 0x14>; | |
compatible = "brcm,bcm2708-i2c"; | |
interrupts = <0x2 0x15>; | |
- linux,phandle = <0x12>; | |
- phandle = <0x12>; | |
+ linux,phandle = <0x10>; | |
+ phandle = <0x10>; | |
reg = <0x7e805000 0x1000>; | |
status = "disabled"; | |
}; | |
@@ -374,7 +386,7 @@ | |
dmas = <0x7 0x2 0x7 0x3>; | |
linux,phandle = <0x1f>; | |
phandle = <0x1f>; | |
- pinctrl-0 = <0x9>; | |
+ pinctrl-0 = <0x8>; | |
pinctrl-names = "default"; | |
reg = <0x7e203000 0x24>; | |
status = "disabled"; | |
@@ -391,18 +403,6 @@ | |
reg = <0x7e00b200 0x200>; | |
}; | |
- leds: leds { | |
- compatible = "gpio-leds"; | |
- | |
- act_led: act { | |
- gpios = <0x16 0x0 0x0>; | |
- label = "led0"; | |
- linux,default-trigger = "mmc0"; | |
- linux,phandle = <0x23>; | |
- phandle = <0x23>; | |
- }; | |
- }; | |
- | |
local_intc: local_intc { | |
#interrupt-cells = <0x1>; | |
compatible = "brcm,bcm2836-l1-intc"; | |
@@ -431,7 +431,7 @@ | |
dmas = <0x7 0xb>; | |
interrupts = <0x2 0x1e>; | |
non-removable; | |
- pinctrl-0 = <0x10>; | |
+ pinctrl-0 = <0x13>; | |
pinctrl-names = "default"; | |
reg = <0x7e300000 0x100>; | |
status = "okay"; | |
@@ -439,18 +439,21 @@ | |
pixelvalve0: pixelvalve@7e206000 { | |
compatible = "brcm,bcm2835-pixelvalve0"; | |
+ interrupts = <0x2 0xd>; | |
reg = <0x7e206000 0x100>; | |
status = "disabled"; | |
}; | |
pixelvalve1: pixelvalve@7e207000 { | |
compatible = "brcm,bcm2835-pixelvalve1"; | |
+ interrupts = <0x2 0xe>; | |
reg = <0x7e207000 0x100>; | |
status = "disabled"; | |
}; | |
pixelvalve2: pixelvalve@7e807000 { | |
compatible = "brcm,bcm2835-pixelvalve2"; | |
+ interrupts = <0x2 0xa>; | |
reg = <0x7e807000 0x100>; | |
status = "disabled"; | |
}; | |
@@ -459,8 +462,8 @@ | |
#power-domain-cells = <0x1>; | |
compatible = "raspberrypi,bcm2835-power"; | |
firmware = <0x15>; | |
- linux,phandle = <0x13>; | |
- phandle = <0x13>; | |
+ linux,phandle = <0x11>; | |
+ phandle = <0x11>; | |
}; | |
pwm: pwm@7e20c000 { | |
@@ -478,7 +481,6 @@ | |
linux,phandle = <0x26>; | |
phandle = <0x26>; | |
reg = <0x7e104000 0x10>; | |
- status = "okay"; | |
}; | |
sdhost: sdhost@7e202000 { | |
@@ -492,7 +494,7 @@ | |
interrupts = <0x2 0x18>; | |
linux,phandle = <0x27>; | |
phandle = <0x27>; | |
- pinctrl-0 = <0x8>; | |
+ pinctrl-0 = <0x12>; | |
pinctrl-names = "default"; | |
reg = <0x7e202000 0x100>; | |
status = "okay"; | |
@@ -513,12 +515,12 @@ | |
}; | |
uart1: serial@7e215040 { | |
- clocks = <0xe 0x0>; | |
+ clocks = <0xd 0x0>; | |
compatible = "brcm,bcm2835-aux-uart"; | |
interrupts = <0x1 0x1d>; | |
linux,phandle = <0x1e>; | |
phandle = <0x1e>; | |
- pinctrl-0 = <0xf>; | |
+ pinctrl-0 = <0xe>; | |
pinctrl-names = "default"; | |
reg = <0x7e215040 0x40>; | |
status = "okay"; | |
@@ -540,18 +542,18 @@ | |
status = "disabled"; | |
}; | |
- spi0: spi@7e204000 { | |
+ spi0: spi: spi@7e204000 { | |
#address-cells = <0x1>; | |
#size-cells = <0x0>; | |
clocks = <0x4 0x14>; | |
compatible = "brcm,bcm2835-spi"; | |
- cs-gpios = <0xa 0x8 0x1 0xa 0x7 0x1>; | |
+ cs-gpios = <0xb 0x8 0x1 0xb 0x7 0x1>; | |
dma-names = "tx", "rx"; | |
dmas = <0x7 0x6 0x7 0x7>; | |
interrupts = <0x2 0x16>; | |
linux,phandle = <0x20>; | |
phandle = <0x20>; | |
- pinctrl-0 = <0xb 0xc>; | |
+ pinctrl-0 = <0x9 0xa>; | |
pinctrl-names = "default"; | |
reg = <0x7e204000 0x1000>; | |
status = "disabled"; | |
@@ -576,17 +578,17 @@ | |
spi1: spi@7e215080 { | |
#address-cells = <0x1>; | |
#size-cells = <0x0>; | |
- clocks = <0xe 0x1>; | |
+ clocks = <0xd 0x1>; | |
compatible = "brcm,bcm2835-aux-spi"; | |
interrupts = <0x1 0x1d>; | |
reg = <0x7e215080 0x40>; | |
status = "disabled"; | |
}; | |
- spi2: spi@7e2150C0 { | |
+ spi2: spi@7e2150c0 { | |
#address-cells = <0x1>; | |
#size-cells = <0x0>; | |
- clocks = <0xe 0x2>; | |
+ clocks = <0xd 0x2>; | |
compatible = "brcm,bcm2835-aux-spi"; | |
interrupts = <0x1 0x1d>; | |
reg = <0x7e2150c0 0x40>; | |
@@ -612,6 +614,8 @@ | |
}; | |
usb: usb@7e980000 { | |
+ #address-cells = <0x1>; | |
+ #size-cells = <0x0>; | |
compatible = "brcm,bcm2708-usb"; | |
interrupts = <0x2 0x0 0x1 0x9>; | |
reg = <0x7e980000 0x10000 0x7e006000 0x1000>; | |
@@ -619,6 +623,7 @@ | |
v3d: v3d@7ec00000 { | |
compatible = "brcm,vc4-v3d"; | |
+ interrupts = <0x1 0xa>; | |
reg = <0x7ec00000 0x1000>; | |
status = "disabled"; | |
}; | |
@@ -638,8 +643,8 @@ | |
compatible = "brcm,bcm2835-virtgpio"; | |
firmware = <0x15>; | |
gpio-controller; | |
- linux,phandle = <0x16>; | |
- phandle = <0x16>; | |
+ linux,phandle = <0x17>; | |
+ phandle = <0x17>; | |
status = "okay"; | |
}; | |
@@ -648,7 +653,6 @@ | |
linux,phandle = <0x25>; | |
phandle = <0x25>; | |
reg = <0x7e100000 0x28>; | |
- status = "okay"; | |
}; | |
}; | |
}; |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment