NGINX config for SSL with Let's Encrypt certs

nginx.conf

# UPDATED 17 February 2019
# Redirect all HTTP traffic to HTTPS
server {
   listen 80;
   listen [::]:80; 	
   server_name www.domain.com domain.com;
   return 301 https://$host$request_uri;
}

# SSL configuration
server {
   listen 443 ssl http2;
   listen [::]:443 ssl http2; 	
   server_name www.domain.com domain.com;
	ssl_certificate      /etc/letsencrypt/live/www.domain.com/fullchain.pem;
    	ssl_certificate_key  /etc/letsencrypt/live/www.domain.com/privkey.pem;
  
  	# Improve HTTPS performance with session resumption
  	ssl_session_cache shared:SSL:10m;
  	ssl_session_timeout 10m;

	# Enable server-side protection against BEAST attacks
  	ssl_protocols TLSv1.2;
	ssl_prefer_server_ciphers on;
	ssl_ciphers "ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384";
  		
        # RFC-7919 recommended: https://wiki.mozilla.org/Security/Server_Side_TLS#ffdhe4096
        ssl_dhparam /etc/ssl/ffdhe4096.pem;
        ssl_ecdh_curve secp521r1:secp384r1;

	# Aditional Security Headers
	# ref: https://developer.mozilla.org/en-US/docs/Security/HTTP_Strict_Transport_Security
	add_header Strict-Transport-Security "max-age=31536000; includeSubDomains";

	# ref: https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/X-Frame-Options
	add_header X-Frame-Options DENY always;

	# ref: https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/X-Content-Type-Options
	add_header X-Content-Type-Options nosniff always;

	# ref: https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/X-XSS-Protection
	add_header X-Xss-Protection "1; mode=block" always;

  	# Enable OCSP stapling 
	# ref. http://blog.mozilla.org/security/2013/07/29/ocsp-stapling-in-firefox
  	ssl_stapling on;
  	ssl_stapling_verify on;
  	ssl_trusted_certificate /etc/letsencrypt/live/www.domain.com/fullchain.pem;
  	resolver 1.1.1.1 1.0.0.1 [2606:4700:4700::1111] [2606:4700:4700::1001] valid=300s; # Cloudflare
  	resolver_timeout 5s;

# Required for LE certificate enrollment using certbot
   location '/.well-known/acme-challenge' {
	default_type "text/plain";
	root /var/www/html;
   }
   location / {
	root /var/www/html;
   }
}

Perhaps you should also add:

worker_processes  1;

error_log  /var/log/nginx/error.log warn;
pid        /var/run/nginx.pid;


events {
  worker_connections  1024;
}

http {

.... gist here ....

}

You'd most likely want to keep only TLS 1.2 and 1.3

ssl_protocols TLSv1.2 TLSv1.3;

Out of curiosity, why should SSLv3 be disabled?

@rmoretto

Out of curiosity, why should SSLv3 be disabled?

See https://www.nginx.com/blog/nginx-poodle-ssl/

Latest version obtains an A+ and 100% SSL report from Qualys SSL Labs

Latest version obtains an A+ and 100% SSL report from Qualys SSL Labs

Note : If you want to obtain the A+ and 100% SSL report, make sure to use a 4096-bit private key. Add --rsa-key-size 4096 when generating keys with Certbot.

HI guys,

I followed the nginx config and i recive a error where restart the nginx.service.

Restarting nginx (via systemctl): nginx.serviceJob for nginx.service failed because the control process exited with error code.
See "systemctl status nginx.service" and "journalctl -xe" for details.

systemctl status nginx.service
● nginx.service - A high performance web server and a reverse proxy server
Loaded: loaded (/lib/systemd/system/nginx.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Tue 2019-05-28 19:33:40 UTC; 24s ago
Docs: man:nginx(8)
Process: 1263 ExecStop=/sbin/start-stop-daemon --quiet --stop --retry QUIT/5 --pidfile /run/nginx.pid (code=exited, status=0/SUCCESS)
Process: 1247 ExecStart=/usr/sbin/nginx -g daemon on; master_process on; (code=exited, status=0/SUCCESS)
Process: 2246 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on; master_process on; (code=exited, status=1/FAILURE)
Main PID: 1249 (code=exited, status=0/SUCCESS)

May 28 19:33:40 snipeit systemd[1]: Starting A high performance web server and a reverse proxy server...
May 28 19:33:40 snipeit nginx[2246]: nginx: [emerg] "server" directive is not allowed here in /etc/nginx/sites-enabled/default:21
May 28 19:33:40 snipeit nginx[2246]: nginx: configuration file /etc/nginx/nginx.conf test failed
May 28 19:33:40 snipeit systemd[1]: nginx.service: Control process exited, code=exited status=1
May 28 19:33:40 snipeit systemd[1]: nginx.service: Failed with result 'exit-code'.
May 28 19:33:40 snipeit systemd[1]: Failed to start A high performance web server and a reverse proxy server.

Can anybody help me?

HI guys,

I followed the nginx config and i recive a error where restart the nginx.service.

Restarting nginx (via systemctl): nginx.serviceJob for nginx.service failed because the control process exited with error code.
See "systemctl status nginx.service" and "journalctl -xe" for details.

systemctl status nginx.service
● nginx.service - A high performance web server and a reverse proxy server
Loaded: loaded (/lib/systemd/system/nginx.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Tue 2019-05-28 19:33:40 UTC; 24s ago
Docs: man:nginx(8)
Process: 1263 ExecStop=/sbin/start-stop-daemon --quiet --stop --retry QUIT/5 --pidfile /run/nginx.pid (code=exited, status=0/SUCCESS)
Process: 1247 ExecStart=/usr/sbin/nginx -g daemon on; master_process on; (code=exited, status=0/SUCCESS)
Process: 2246 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on; master_process on; (code=exited, status=1/FAILURE)
Main PID: 1249 (code=exited, status=0/SUCCESS)

May 28 19:33:40 snipeit systemd[1]: Starting A high performance web server and a reverse proxy server...
May 28 19:33:40 snipeit nginx[2246]: nginx: [emerg] "server" directive is not allowed here in /etc/nginx/sites-enabled/default:21
May 28 19:33:40 snipeit nginx[2246]: nginx: configuration file /etc/nginx/nginx.conf test failed
May 28 19:33:40 snipeit systemd[1]: nginx.service: Control process exited, code=exited status=1
May 28 19:33:40 snipeit systemd[1]: nginx.service: Failed with result 'exit-code'.
May 28 19:33:40 snipeit systemd[1]: Failed to start A high performance web server and a reverse proxy server.

Can anybody help me?

You probably fixed it by now - just for the record .
You probably have retained the "default" file at the path = /etc/nginx/sites-available/default.
You also have Sym Linked it to DIR = /etc/nginx/sites-enabled/

In your /etc/nginx/sites-enabled/default , file you made changes and restarted Nginx , the Config / Changes you made were not to the liking of Nginx thus the statement - "test failed". The test is actually run on the File /etc/nginx/nginx.conf , it cascades down to all the Linked files , in your case that would be the /etc/nginx/sites-enabled/default.

Further here - https://stackoverflow.com/a/58480166/4928635

Thanks for the infomation about ssl_dhparam part, though 4096 takes too long to generate, and as https://mozilla.github.io/server-side-tls/ssl-config-generator/ suggested, I use 2048 instead.
Thank you after all, helped a lot.

use this instead it will speed it up :D openssl dhparam -dsaparam -out dhparam.pem 4096

if you need to support different subdomains (eg. api. , www. , etc...) you should duplicate the server section of your configuration and adapt accordingly. Now when it comes to adding SSL for each of the server sections there are a number of options you have: - either you generate a certificate for each of the subdomains - or you generate a wildcard certificate - eg. https://medium.com/@utkarsh_verma/how-to-obtain-a-wildcard-ssl-certificate-from-lets-encrypt-and-setup-nginx-to-use-wildcard-cfb050c8b33f But reusing a certificate from another subdomain is a no-go... FQDN and certificate must match

…

On Sat, 5 Oct 2019 at 19:12, Tyrfing Mjølner ***@***.***> wrote: This setup covers www.domain.tld, how would I do api.domain.tld in the same config? I assume I copy the server section and amend the api server section to become the api counter part of www, do I still use the same: /etc/letsencrypt/live/www.domain.com/fullchain.pem or will I make a separate one for api? Will there be an entry like: /etc/letsencrypt/live/ api.domain.com/fullchain.pem — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <https://gist.github.com/9a39bb636a820fb97eec2ed85e473d38?email_source=notifications&email_token=AAP5C2R7JVXJRHXUNHFH4QLQNDDGBA5CNFSM4HQGOZU2YY3PNVWWK3TUL52HS4DFVNDWS43UINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAFZ6UY#gistcomment-3046732>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AAP5C2VSEWAPSL6DKUVOUJ3QNDDGBANCNFSM4HQGOZUQ> .

Thanks for the infomation about ssl_dhparam part, though 4096 takes too long to generate, and as https://mozilla.github.io/server-side-tls/ssl-config-generator/ suggested, I use 2048 instead.
Thank you after all, helped a lot.

use this instead it will speed it up :D openssl dhparam -dsaparam -out dhparam.pem 4096

@AKApumkin you probably meant openssl dhparam -dsaparam -out dhparam.pem 2048 ;-)

@nrollr Nope, defiantly 4096. That command will generate the 4096 much faster. There's a good explanation of why here

https://security.stackexchange.com/questions/95178/diffie-hellman-parameters-still-calculating-after-24-hours

thanks for this snippet!

if I'm not mistaken the acme protocol requires port 80 for the http-01 challenge. something like below should do:

server {
   listen 80;
   listen [::]:80; 	
   server_name www.domain.com domain.com;

   location '/.well-known/acme-challenge' {
	default_type "text/plain";
	root /var/www/html;
   }
   location / {
        return 301 https://$host$request_uri;
    }
}

@kmcminn actually it tries HTTPs first

You can use Mozilla SSL Configuration Generator:
https://ssl-config.mozilla.org/#server=nginx&version=1.18.0-r0&config=intermediate&openssl=1.1.1g-r0&guideline=5.6
A real-world working example:
https://github.com/vald-phoenix/gitea/blob/master/conf/nginx.conf