hyperion config for lightpack in andromeda configuration

hyperion.config.json

// Automatically generated configuration file for 'Hyperion daemon'
// Generated by: HyperCon (The Hyperion deamon configuration file builder

{
	/// Device configuration contains the following fields: 
	/// * 'name'       : The user friendly name of the device (only used for display purposes)
	/// * 'type'       : The type of the device or leds (known types for now are 'ws2801', 'ldp8806',
	///                  'lpd6803', 'sedu', 'adalight', 'lightpack', 'test' and 'none')
	/// * 'output'     : The output specification depends on selected device. This can for example be the
	///                  device specifier, device serial number, or the output file name
	/// * 'rate'       : The baudrate of the output to the device
	/// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).
	"device" :
	{
		"name"       : "MyPi",
		"type"       : "lightpack",
		"output"     : "",
		"rate"       : 250000,
		"colorOrder" : "rgb"
	},

	/// Color manipulation configuration used to tune the output colors to specific surroundings. 
	/// The configuration contains a list of color-transforms. Each transform contains the 
	/// following fields:
	///  * 'id'   : The unique identifier of the color transformation (eg 'device_1')	///  * 'leds' : The indices (or index ranges) of the leds to which this color transform applies
	///             (eg '0-5, 9, 11, 12-17'). The indices are zero based.	///  * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following 
	///            tuning parameters:
	///            - 'saturationGain'  The gain adjustement of the saturation
	///            - 'valueGain'       The gain adjustement of the value
	///  * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the 
	///                           following tuning parameters for each channel:
	///            - 'threshold'       The minimum required input value for the channel to be on 
	///                                (else zero)
	///            - 'gamma'           The gamma-curve correction factor
	///            - 'blacklevel'      The lowest possible value (when the channel is black)
	///            - 'whitelevel'      The highest possible value (when the channel is white)
	///
	/// Next to the list with color transforms there is also a smoothing option.
	///  * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning 
	///                  parameters:
	///            - 'type'            The type of smoothing algorithm ('linear' or 'none')
	///            - 'time_ms'         The time constant for smoothing algorithm in milliseconds
	///            - 'updateFrequency' The update frequency of the leds in Hz
	"color" :
	{
		"transform" :
		[
			{
				"id"   : "default",
				"leds" : "*",
				"hsv" :
				{
					"saturationGain" : 1.0000,
					"valueGain"      : 0.8000
				},
				"red" :
				{
					"threshold"  : 0.0000,
					"gamma"      : 1.0000,
					"blacklevel" : 0.0000,
					"whitelevel" : 0.7000
				},
				"green" :
				{
					"threshold"  : 0.0000,
					"gamma"      : 1.0000,
					"blacklevel" : 0.0000,
					"whitelevel" : 0.7000
				},
				"blue" :
				{
					"threshold"  : 0.0000,
					"gamma"      : 1.0000,
					"blacklevel" : 0.0000,
					"whitelevel" : 0.7000
				}
			}
		],
		"smoothing" :
		{
			"type"            : "linear",
			"time_ms"         : 100,
			"updateFrequency" : 20.0000
		}
	},

	///  The configuration for each individual led. This contains the specification of the area 
	///  averaged of an input image for each led to determine its color. Each item in the list 
	///  contains the following fields:
	///  * index: The index of the led. This determines its location in the string of leds; zero 
	///           being the first led.
	///  * hscan: The fractional part of the image along the horizontal used for the averaging 
	///           (minimum and maximum inclusive)
	///  * vscan: The fractional part of the image along the vertical used for the averaging 
	///           (minimum and maximum inclusive)
	"leds" : 
	[
		{
			"index" : 0,
			"hscan" : { "minimum" : 0.7500, "maximum" : 1.0000 },
			"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
		},
		{
			"index" : 1,
			"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
			"vscan" : { "minimum" : 0.5000, "maximum" : 1.0000 }
		},
		{
			"index" : 2,
			"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.5000 }
		},
		{
			"index" : 3,
			"hscan" : { "minimum" : 0.7500, "maximum" : 1.0000 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
		},
		{
			"index" : 4,
			"hscan" : { "minimum" : 0.5000, "maximum" : 0.7500 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
		},
		{
			"index" : 5,
			"hscan" : { "minimum" : 0.2500, "maximum" : 0.5000 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
		},
		{
			"index" : 6,
			"hscan" : { "minimum" : 0.0000, "maximum" : 0.2500 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
		},
		{
			"index" : 7,
			"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.5000 }
		},
		{
			"index" : 8,
			"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
			"vscan" : { "minimum" : 0.5000, "maximum" : 1.0000 }
		},
		{
			"index" : 9,
			"hscan" : { "minimum" : 0.0000, "maximum" : 0.2500 },
			"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
		}
	],

	/// The black border configuration, contains the following items: 
	///  * enable    : true if the detector should be activated
	///  * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0)
	"blackborderdetector" : 
	{
		"enable" : true,
		"threshold" : 0.0
	},

	/// The configuration of the effect engine, contains the following items: 
	///  * paths        : An array with absolute location(s) of directories with effects 
	///  * bootsequence : The effect selected as 'boot sequence'
	"effects" : 
	{
		"paths" : 
		[
			"/opt/hyperion/effects"
		]
	},

	"bootsequence" : 
	{
		"effect" : "Knight rider",
		"duration_ms" : 6000
	},

	///  The configuration for the frame-grabber, contains the following items: 
	///   * width        : The width of the grabbed frames [pixels]
	///   * height       : The height of the grabbed frames [pixels]
	///   * frequency_Hz : The frequency of the frame grab [Hz]
// 	"framegrabber" : 
// 	{
// 		"width" : 64,
// 		"height" : 64,
// 		"frequency_Hz" : 10.0
// 	},

	/// The configuration of the XBMC connection used to enable and disable the frame-grabber. Contains the following fields: 
	///  * xbmcAddress       : The IP address of the XBMC-host
	///  * xbmcTcpPort       : The TCP-port of the XBMC-server
	///  * grabVideo         : Flag indicating that the frame-grabber is on(true) during video playback
	///  * grabPictures      : Flag indicating that the frame-grabber is on(true) during picture show
	///  * grabAudio         : Flag indicating that the frame-grabber is on(true) during audio playback
	///  * grabMenu          : Flag indicating that the frame-grabber is on(true) in the XBMC menu
	///  * grabScreensaver   : Flag indicating that the frame-grabber is on(true) when XBMC is on screensaver
	///  * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing
// 	"xbmcVideoChecker" : 
// 	{
// 		"xbmcAddress" : "127.0.0.1",
// 		"xbmcTcpPort" : 9090,
// 		"grabVideo" : true,
// 		"grabPictures" : true,
// 		"grabAudio" : true,
// 		"grabMenu" : false,
// 		"grabScreensaver" : true,
// 		"enable3DDetection" : true
// 	},

	/// The configuration of the Json server which enables the json remote interface
	///  * port : Port at which the json server is started
// 	"jsonServer" : 
// 	{
// 		"port" : 19444
// 	},

	/// The configuration of the Proto server which enables the protobuffer remote interface
	///  * port : Port at which the protobuffer server is started
// 	"protoServer" : 
// 	{
// 		"port" : 19445
// 	},

	/// The configuration of the boblight server which enables the boblight remote interface
	///  * port : Port at which the boblight server is started
	"boblightServer" : 
	{
		"port" : 19333
	},

	"endOfJson" : "endOfJson"
}