Created
May 21, 2021 05:10
-
-
Save pdp7/023366257d1576672d0199221923b669 to your computer and use it in GitHub Desktop.
beaglev boot
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| MC CD is 0x1, force to True. | |
| MMC CD is 0x1, force to True. | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| Scanning mmc 0:1... | |
| Found /extlinux/extlinux.conf | |
| Retrieving file: /extlinux/extlinux.conf | |
| 848 bytes read in 10 ms (82 KiB/s) | |
| Fedora-riscv64-vic7100-xfce-dev-Rawhide-20210516233526.n.0 Boot Options. | |
| 1: Fedora-riscv64-vic7100-xfce-dev-Rawhide-20210516233526.n.0 (5.10.6-210.0.riscv64.fc33.riscv64) | |
| 2: esmil-linux-5.13-rc2 | |
| Enter choice: 2 | |
| 2: esmil-linux-5.13-rc2 | |
| Retrieving file: /Image | |
| 17585664 bytes read in 2061 ms (8.1 MiB/s) | |
| append: earlycon root=/dev/mmcblk0p2 rootwait stmmac.chain_mode=1 | |
| Retrieving file: /jh7100-starlight.dtb | |
| 17438 bytes read in 8 ms (2.1 MiB/s) | |
| Moving Image from 0x84000000 to 0x80200000, end=81315000 | |
| ## Flattened Device Tree blob at 88000000 | |
| Booting using the fdt blob at 0x88000000 | |
| Using Device Tree in place at 0000000088000000, end 000000008800741d | |
| Starting kernel ... | |
| Linux version 5.13.0-rc2-starlight-drew-307180-ga9ca03607710 (pdp7@x1) (riscv64-linux-gnu-gcc (Ubuntu 10.2.0-8ubuntu1) 10.2.0, GNU ld (GNU Binutils for Ubuntu) 2.35.1) #5 SMP Thu May 20 21:40:04 PDT 2021 | |
| OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 | |
| Machine model: BeagleV Starlight Beta | |
| earlycon: uart0 at MMIO32 0x0000000012440000 (options '115200') | |
| printk: bootconsole [uart0] enabled | |
| efi: UEFI not found. | |
| Reserved memory: created CMA memory pool at 0x00000000a0000000, size 640 MiB | |
| OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
| Reserved memory: created DMA memory pool at 0x00000000f9000000, size 16 MiB | |
| OF: reserved mem: initialized node framebuffer@f9000000, compatible id shared-dma-pool | |
| Reserved memory: created DMA memory pool at 0x00000000fb000000, size 32 MiB | |
| OF: reserved mem: initialized node framebuffer@fb000000, compatible id shared-dma-pool | |
| Zone ranges: | |
| DMA32 [mem 0x0000000080200000-0x00000000ffffffff] | |
| Normal [mem 0x0000000100000000-0x000000027fffffff] | |
| Movable zone start for each node | |
| Early memory node ranges | |
| node 0: [mem 0x0000000080200000-0x00000000f8ffffff] | |
| node 0: [mem 0x00000000f9000000-0x00000000f9ffffff] | |
| node 0: [mem 0x00000000fa000000-0x00000000faffffff] | |
| node 0: [mem 0x00000000fb000000-0x00000000fcffffff] | |
| node 0: [mem 0x00000000fd000000-0x000000027fffffff] | |
| Initmem setup node 0 [mem 0x0000000080200000-0x000000027fffffff] | |
| On node 0 totalpages: 2096640 | |
| DMA32 zone: 7161 pages used for memmap | |
| DMA32 zone: 0 pages reserved | |
| DMA32 zone: 523776 pages, LIFO batch:63 | |
| Normal zone: 21504 pages used for memmap | |
| Normal zone: 1572864 pages, LIFO batch:63 | |
| SBI specification v0.2 detected | |
| SBI implementation ID=0x1 Version=0x9 | |
| SBI TIME extension detected | |
| SBI IPI extension detected | |
| SBI RFENCE extension detected | |
| software IO TLB: mapped [mem 0x000000009c000000-0x00000000a0000000] (64MB) | |
| SBI v0.2 HSM extension detected | |
| riscv: ISA extensions acdfim | |
| riscv: ELF capabilities acdfim | |
| percpu: Embedded 16 pages/cpu s33752 r0 d31784 u65536 | |
| pcpu-alloc: s33752 r0 d31784 u65536 alloc=16*4096 | |
| pcpu-alloc: [0] 0 [0] 1 | |
| Built 1 zonelists, mobility grouping on. Total pages: 2067975 | |
| Kernel command line: earlycon root=/dev/mmcblk0p2 rootwait stmmac.chain_mode=1 | |
| Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | |
| Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| Sorting __ex_table... | |
| mem auto-init: stack:off, heap alloc:off, heap free:off | |
| Memory: 6749156K/8386560K available (6431K kernel code, 4795K rwdata, 2048K rodata, 2137K init, 315K bss, 982044K reserved, 655360K cma-reserved) | |
| SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
| rcu: Hierarchical RCU implementation. | |
| rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. | |
| Tracing variant of Tasks RCU enabled. | |
| rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
| NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| riscv-intc: 64 local interrupts mapped | |
| plic: disable L2 cache irq 128 in plic | |
| plic: disable L2 cache irq 131 in plic | |
| plic: disable L2 cache irq 129 in plic | |
| plic: disable L2 cache irq 130 in plic | |
| plic: disable L2 cache irq 128 in plic | |
| plic: disable L2 cache irq 131 in plic | |
| plic: disable L2 cache irq 129 in plic | |
| plic: disable L2 cache irq 130 in plic | |
| plic: interrupt-controller@c000000: mapped 127 interrupts with 2 handlers for 4 contexts. | |
| riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1] | |
| clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x171024e6b, max_idle_ns: 440795202301 ns | |
| sched_clock: 64 bits at 6MHz, resolution 160ns, wraps every 4398046511040ns | |
| Console: colour dummy device 80x25 | |
| printk: console [tty0] enabled | |
| printk: bootconsole [uart0] disabled | |
| Linux version 5.13.0-rc2-starlight-drew-307180-ga9ca03607710 (pdp7@x1) (riscv64-linux-gnu-gcc (Ubuntu 10.2.0-8ubuntu1) 10.2.0, GNU ld (GNU Binutils for Ubuntu) 2.35.1) #5 SMP Thu May 20 21:40:04 PDT 2021 | |
| OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 | |
| Machine model: BeagleV Starlight Beta | |
| earlycon: uart0 at MMIO32 0x0000000012440000 (options '115200') | |
| printk: bootconsole [uart0] enabled | |
| efi: UEFI not found. | |
| Reserved memory: created CMA memory pool at 0x00000000a0000000, size 640 MiB | |
| OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
| Reserved memory: created DMA memory pool at 0x00000000f9000000, size 16 MiB | |
| OF: reserved mem: initialized node framebuffer@f9000000, compatible id shared-dma-pool | |
| Reserved memory: created DMA memory pool at 0x00000000fb000000, size 32 MiB | |
| OF: reserved mem: initialized node framebuffer@fb000000, compatible id shared-dma-pool | |
| Zone ranges: | |
| DMA32 [mem 0x0000000080200000-0x00000000ffffffff] | |
| Normal [mem 0x0000000100000000-0x000000027fffffff] | |
| Movable zone start for each node | |
| Early memory node ranges | |
| node 0: [mem 0x0000000080200000-0x00000000f8ffffff] | |
| node 0: [mem 0x00000000f9000000-0x00000000f9ffffff] | |
| node 0: [mem 0x00000000fa000000-0x00000000faffffff] | |
| node 0: [mem 0x00000000fb000000-0x00000000fcffffff] | |
| node 0: [mem 0x00000000fd000000-0x000000027fffffff] | |
| Initmem setup node 0 [mem 0x0000000080200000-0x000000027fffffff] | |
| On node 0 totalpages: 2096640 | |
| DMA32 zone: 7161 pages used for memmap | |
| DMA32 zone: 0 pages reserved | |
| DMA32 zone: 523776 pages, LIFO batch:63 | |
| Normal zone: 21504 pages used for memmap | |
| Normal zone: 1572864 pages, LIFO batch:63 | |
| SBI specification v0.2 detected | |
| SBI implementation ID=0x1 Version=0x9 | |
| SBI TIME extension detected | |
| SBI IPI extension detected | |
| SBI RFENCE extension detected | |
| software IO TLB: mapped [mem 0x000000009c000000-0x00000000a0000000] (64MB) | |
| SBI v0.2 HSM extension detected | |
| riscv: ISA extensions acdfim | |
| riscv: ELF capabilities acdfim | |
| percpu: Embedded 16 pages/cpu s33752 r0 d31784 u65536 | |
| pcpu-alloc: s33752 r0 d31784 u65536 alloc=16*4096 | |
| pcpu-alloc: [0] 0 [0] 1 | |
| Built 1 zonelists, mobility grouping on. Total pages: 2067975 | |
| Kernel command line: earlycon root=/dev/mmcblk0p2 rootwait stmmac.chain_mode=1 | |
| Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | |
| Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| Sorting __ex_table... | |
| mem auto-init: stack:off, heap alloc:off, heap free:off | |
| Memory: 6749156K/8386560K available (6431K kernel code, 4795K rwdata, 2048K rodata, 2137K init, 315K bss, 982044K reserved, 655360K cma-reserved) | |
| SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
| rcu: Hierarchical RCU implementation. | |
| rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. | |
| Tracing variant of Tasks RCU enabled. | |
| rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
| NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| riscv-intc: 64 local interrupts mapped | |
| plic: disable L2 cache irq 128 in plic | |
| plic: disable L2 cache irq 131 in plic | |
| plic: disable L2 cache irq 129 in plic | |
| plic: disable L2 cache irq 130 in plic | |
| plic: disable L2 cache irq 128 in plic | |
| plic: disable L2 cache irq 131 in plic | |
| plic: disable L2 cache irq 129 in plic | |
| plic: disable L2 cache irq 130 in plic | |
| plic: interrupt-controller@c000000: mapped 127 interrupts with 2 handlers for 4 contexts. | |
| riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1] | |
| clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x171024e6b, max_idle_ns: 440795202301 ns | |
| sched_clock: 64 bits at 6MHz, resolution 160ns, wraps every 4398046511040ns | |
| Console: colour dummy device 80x25 | |
| printk: console [tty0] enabled | |
| printk: bootconsole [uart0] disabled | |
| Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=25000) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| ASID allocator disabled | |
| rcu: Hierarchical SRCU implementation. | |
| EFI services will not be available. | |
| smp: Bringing up secondary CPUs ... | |
| smp: Brought up 1 node, 2 CPUs | |
| devtmpfs: initialized | |
| random: get_random_u32 called from bucket_table_alloc.isra.0+0x50/0x144 with crng_init=0 | |
| clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| futex hash table entries: 512 (order: 3, 32768 bytes, linear) | |
| pinctrl core: initialized pinctrl subsystem | |
| NET: Registered protocol family 16 | |
| raid6: skip pq benchmark and using algorithm int64x8 | |
| raid6: using intx1 recovery algorithm | |
| gpio gpiochip0: (11910000.gpio): added GPIO chardev (254:0) | |
| gpio gpiochip0: registered GPIOs 0 to 63 on 11910000.gpio | |
| starfive_gpio 11910000.gpio: StarFive GPIO chip registered 0 GPIOs | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| of_get_named_gpiod_flags: parsed 'scl-gpio' property of node '/soc/i2c@118b0000[0]' - status (0) | |
| of_get_named_gpiod_flags: parsed 'sda-gpio' property of node '/soc/i2c@118b0000[0]' - status (0) | |
| i2c_designware 118b0000.i2c: GPIO lookup for consumer scl | |
| i2c_designware 118b0000.i2c: using device tree for GPIO lookup | |
| of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/soc/i2c@118b0000[0]' | |
| of_get_named_gpiod_flags: parsed 'scl-gpio' property of node '/soc/i2c@118b0000[0]' - status (0) | |
| gpio gpiochip0: Persistence not supported for GPIO 62 | |
| i2c_designware 118b0000.i2c: GPIO lookup for consumer sda | |
| i2c_designware 118b0000.i2c: using device tree for GPIO lookup | |
| of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/soc/i2c@118b0000[0]' | |
| of_get_named_gpiod_flags: parsed 'sda-gpio' property of node '/soc/i2c@118b0000[0]' - status (0) | |
| gpio gpiochip0: Persistence not supported for GPIO 61 | |
| i2c_designware 118b0000.i2c: running with gpio recovery mode! scl,sda | |
| of_get_named_gpiod_flags: parsed 'scl-gpio' property of node '/soc/i2c@118c0000[0]' - status (0) | |
| of_get_named_gpiod_flags: parsed 'sda-gpio' property of node '/soc/i2c@118c0000[0]' - status (0) | |
| i2c_designware 118c0000.i2c: GPIO lookup for consumer scl | |
| i2c_designware 118c0000.i2c: using device tree for GPIO lookup | |
| of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/soc/i2c@118c0000[0]' | |
| of_get_named_gpiod_flags: parsed 'scl-gpio' property of node '/soc/i2c@118c0000[0]' - status (0) | |
| gpio gpiochip0: Persistence not supported for GPIO 47 | |
| i2c_designware 118c0000.i2c: GPIO lookup for consumer sda | |
| i2c_designware 118c0000.i2c: using device tree for GPIO lookup | |
| of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/soc/i2c@118c0000[0]' | |
| of_get_named_gpiod_flags: parsed 'sda-gpio' property of node '/soc/i2c@118c0000[0]' - status (0) | |
| gpio gpiochip0: Persistence not supported for GPIO 48 | |
| i2c_designware 118c0000.i2c: running with gpio recovery mode! scl,sda | |
| of_get_named_gpiod_flags: parsed 'scl-gpio' property of node '/soc/i2c@12450000[0]' - status (0) | |
| of_get_named_gpiod_flags: parsed 'sda-gpio' property of node '/soc/i2c@12450000[0]' - status (0) | |
| i2c_designware 12450000.i2c: GPIO lookup for consumer scl | |
| i2c_designware 12450000.i2c: using device tree for GPIO lookup | |
| of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/soc/i2c@12450000[0]' | |
| of_get_named_gpiod_flags: parsed 'scl-gpio' property of node '/soc/i2c@12450000[0]' - status (0) | |
| gpio gpiochip0: Persistence not supported for GPIO 60 | |
| i2c_designware 12450000.i2c: GPIO lookup for consumer sda | |
| i2c_designware 12450000.i2c: using device tree for GPIO lookup | |
| of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/soc/i2c@12450000[0]' | |
| of_get_named_gpiod_flags: parsed 'sda-gpio' property of node '/soc/i2c@12450000[0]' - status (0) | |
| gpio gpiochip0: Persistence not supported for GPIO 59 | |
| i2c_designware 12450000.i2c: running with gpio recovery mode! scl,sda | |
| clocksource: Switched to clocksource riscv_clocksource | |
| NET: Registered protocol family 2 | |
| IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) | |
| TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
| TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) | |
| TCP: Hash tables configured (established 65536 bind 65536) | |
| UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) | |
| UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) | |
| NET: Registered protocol family 1 | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| Initialise system trusted keyrings | |
| workingset: timestamp_bits=62 max_order=21 bucket_order=0 | |
| xor: measuring software checksum speed | |
| 8regs : 1740 MB/sec | |
| 8regs_prefetch : 1739 MB/sec | |
| 32regs : 1858 MB/sec | |
| 32regs_prefetch : 1855 MB/sec | |
| xor: using function: 32regs (1858 MB/sec) | |
| Key type asymmetric registered | |
| Asymmetric key parser 'x509' registered | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) | |
| io scheduler bfq registered | |
| dw_axi_dmac_platform 100b0000.dma-controller: DesignWare AXI DMA Controller, 4 channels | |
| dw_axi_dmac_platform 10500000.dma-controller: DesignWare AXI DMA Controller, 16 channels | |
| L2CACHE: No. of Banks in the cache: 2 | |
| L2CACHE: No. of ways per bank: 16 | |
| L2CACHE: Sets per bank: 1024 | |
| L2CACHE: Bytes per cache block: 64 | |
| L2CACHE: Index of the largest way enabled: 0 | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| serial8250 serial8250: no of_node; not parsing pinctrl DT | |
| dw-apb-uart 11870000.serial: GPIO lookup for consumer rs485-term | |
| dw-apb-uart 11870000.serial: using device tree for GPIO lookup | |
| of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/soc/serial@11870000[0]' | |
| of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/soc/serial@11870000[0]' | |
| dw-apb-uart 11870000.serial: using lookup tables for GPIO lookup | |
| dw-apb-uart 11870000.serial: No GPIO consumer rs485-term found | |
| dw-apb-uart 11870000.serial: detected caps 00000000 should be 00000100 | |
| 11870000.serial: ttyS1 at MMIO 0x11870000 (irq = 6, base_baud = 4640625) is a 16550 | |
| dw-apb-uart 12440000.serial: GPIO lookup for consumer rs485-term | |
| dw-apb-uart 12440000.serial: using device tree for GPIO lookup | |
| of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/soc/serial@12440000[0]' | |
| of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/soc/serial@12440000[0]' | |
| dw-apb-uart 12440000.serial: using lookup tables for GPIO lookup | |
| dw-apb-uart 12440000.serial: No GPIO consumer rs485-term found | |
| 12440000.serial: ttyS0 at MMIO 0x12440000 (irq = 7, base_baud = 6250000) is a 16550A | |
| printk: console [ttyS0] enabled | |
| vic-rng 118d0000.trng: Initialized | |
| loop: module loaded | |
| tps65086 0-005e: Failed to read revision register | |
| tps65086: probe of 0-005e failed with error -121 | |
| dw_spi_mmio 12410000.spi: DMA init failed | |
| wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. | |
| wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. | |
| mdio_bus fixed-0: GPIO lookup for consumer reset | |
| mdio_bus fixed-0: using lookup tables for GPIO lookup | |
| mdio_bus fixed-0: No GPIO consumer reset found | |
| libphy: Fixed MDIO Bus: probed | |
| tun: Universal TUN/TAP device driver, 1.6 | |
| stmmaceth 10020000.ethernet: IRQ eth_lpi not found | |
| stmmaceth 10020000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set. | |
| stmmaceth 10020000.ethernet: PTP uses main clock | |
| stmmaceth 10020000.ethernet: User ID: 0x59, Synopsys ID: 0x37 | |
| stmmaceth 10020000.ethernet: DWMAC1000 | |
| stmmaceth 10020000.ethernet: DMA HW capability register supported | |
| stmmaceth 10020000.ethernet: RX Checksum Offload Engine supported | |
| stmmaceth 10020000.ethernet: COE Type 2 | |
| stmmaceth 10020000.ethernet: Wake-Up On Lan supported | |
| stmmaceth 10020000.ethernet: Enhanced/Alternate descriptors | |
| stmmaceth 10020000.ethernet: Enabled extended descriptors | |
| stmmaceth 10020000.ethernet: Chain mode enabled | |
| stmmaceth 10020000.ethernet: Enable RX Mitigation via HW Watchdog Timer | |
| stmmaceth 10020000.ethernet: device MAC address 66:34:b0:6c:de:ad | |
| mdio_bus stmmac-0: GPIO lookup for consumer reset | |
| mdio_bus stmmac-0: using lookup tables for GPIO lookup | |
| mdio_bus stmmac-0: No GPIO consumer reset found | |
| stmmaceth 10020000.ethernet: GPIO lookup for consumer snps,reset | |
| stmmaceth 10020000.ethernet: using device tree for GPIO lookup | |
| of_get_named_gpiod_flags: can't parse 'snps,reset-gpios' property of node '/soc/ethernet@10020000[0]' | |
| of_get_named_gpiod_flags: can't parse 'snps,reset-gpio' property of node '/soc/ethernet@10020000[0]' | |
| stmmaceth 10020000.ethernet: using lookup tables for GPIO lookup | |
| stmmaceth 10020000.ethernet: No GPIO consumer snps,reset found | |
| mdio_bus stmmac-0:00: GPIO lookup for consumer reset | |
| mdio_bus stmmac-0:00: using lookup tables for GPIO lookup | |
| mdio_bus stmmac-0:00: No GPIO consumer reset found | |
| Micrel KSZ9031 Gigabit PHY stmmac-0:00: no of_node; not parsing pinctrl DT | |
| mdio_bus stmmac-0:07: GPIO lookup for consumer reset | |
| mdio_bus stmmac-0:07: using lookup tables for GPIO lookup | |
| mdio_bus stmmac-0:07: No GPIO consumer reset found | |
| Micrel KSZ9031 Gigabit PHY stmmac-0:07: no of_node; not parsing pinctrl DT | |
| libphy: stmmac: probed | |
| Micrel KSZ9031 Gigabit PHY stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL) | |
| Micrel KSZ9031 Gigabit PHY stmmac-0:07: attached PHY driver (mii_bus:phy_addr=stmmac-0:07, irq=POLL) | |
| xhci-hcd xhci-hcd.0.auto: no of_node; not parsing pinctrl DT | |
| xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
| xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 | |
| xhci-hcd xhci-hcd.0.auto: hcc params 0x200073c8 hci version 0x100 quirks 0x0000002000018010 | |
| xhci-hcd xhci-hcd.0.auto: irq 12, io mem 0x104d0000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: xHCI Host Controller | |
| usb usb1: Manufacturer: Linux 5.13.0-rc2-starlight-drew-307180-ga9ca03607710 xhci-hcd | |
| usb usb1: SerialNumber: xhci-hcd.0.auto | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
| xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 | |
| xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed | |
| usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: xHCI Host Controller | |
| usb usb2: Manufacturer: Linux 5.13.0-rc2-starlight-drew-307180-ga9ca03607710 xhci-hcd | |
| usb usb2: SerialNumber: xhci-hcd.0.auto | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| usbcore: registered new interface driver uas | |
| usbcore: registered new interface driver usb-storage | |
| i2c /dev entries driver | |
| sfc_temp_sensor 124a0000.tmpsensor: probe | |
| temp(c): 35.3 | |
| pwrseq_simple wifi-pwrseq: GPIO lookup for consumer reset | |
| pwrseq_simple wifi-pwrseq: using device tree for GPIO lookup | |
| of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/wifi-pwrseq[0]' - status (0) | |
| gpio gpiochip0: Persistence not supported for GPIO 37 | |
| Synopsys Designware Multimedia Card Interface Driver | |
| dw_mmc 10000000.mmc: IDMAC supports 32-bit address mode. | |
| of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led-ack[0]' - status (0) | |
| dw_mmc 10000000.mmc: Using internal DMA controller. | |
| gpio gpiochip0: Persistence not supported for GPIO 43 | |
| dw_mmc 10000000.mmc: Version ID is 290a | |
| gpio-43 (?): no flags found for gpios | |
| dw_mmc 10000000.mmc: DW MMC controller at irq 29,32 bit host data width,32 deep fifo | |
| NET: Registered protocol family 10 | |
| dw_mmc 10000000.mmc: GPIO lookup for consumer cd | |
| dw_mmc 10000000.mmc: using device tree for GPIO lookup | |
| dw_mmc 10010000.mmc: IDMAC supports 32-bit address mode. | |
| of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/mmc@10000000[0]' | |
| dw_mmc 10010000.mmc: Using internal DMA controller. | |
| of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/soc/mmc@10000000[0]' | |
| dw_mmc 10010000.mmc: Version ID is 290a | |
| dw_mmc 10000000.mmc: using lookup tables for GPIO lookup | |
| dw_mmc 10010000.mmc: DW MMC controller at irq 30,32 bit host data width,32 deep fifo | |
| dw_mmc 10000000.mmc: No GPIO consumer cd found | |
| dw_mmc 10000000.mmc: GPIO lookup for consumer wp | |
| dw_mmc 10010000.mmc: GPIO lookup for consumer wp | |
| dw_mmc 10000000.mmc: using device tree for GPIO lookup | |
| dw_mmc 10010000.mmc: using device tree for GPIO lookup | |
| of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@10000000[0]' | |
| of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@10010000[0]' | |
| of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@10000000[0]' | |
| of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@10010000[0]' | |
| dw_mmc 10000000.mmc: using lookup tables for GPIO lookup | |
| dw_mmc 10010000.mmc: using lookup tables for GPIO lookup | |
| dw_mmc 10000000.mmc: No GPIO consumer wp found | |
| mmc_host mmc0: card is polling. | |
| dw_mmc 10010000.mmc: No GPIO consumer wp found | |
| dw_mmc 10010000.mmc: allocated mmc-pwrseq | |
| mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 400000Hz, actual 400000HZ div = 125) | |
| mmc_host mmc1: card is non-removable. | |
| Segment Routing with IPv6 | |
| NET: Registered protocol family 17 | |
| Loading compiled-in X.509 certificates | |
| Btrfs loaded, crc32c=crc32c-generic, zoned=no | |
| mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 400000Hz, actual 400000HZ div = 125) | |
| cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
| cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
| dw-apb-uart 12440000.serial: forbid DMA for kernel console | |
| Waiting for root device /dev/mmcblk0p2... | |
| usb 1-1: new high-speed USB device number 2 using xhci-hcd | |
| mmc1: queuing unknown CIS tuple 0x80 (2 bytes) | |
| mmc1: queuing unknown CIS tuple 0x80 (3 bytes) | |
| mmc1: queuing unknown CIS tuple 0x80 (3 bytes) | |
| mmc1: queuing unknown CIS tuple 0x80 (7 bytes) | |
| mmc1: queuing unknown CIS tuple 0x81 (9 bytes) | |
| mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 10000000Hz, actual 10000000HZ div = 5) | |
| mmc0: new high speed SDHC card at address e624 | |
| mmcblk mmc0:e624: no of_node; not parsing pinctrl DT | |
| random: fast init done | |
| mmcblk0: mmc0:e624 SL16G 14.8 GiB | |
| mmcblk0: p1 p2 | |
| mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 10000000Hz, actual 10000000HZ div = 5) | |
| EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. | |
| mmc1: new high speed SDIO card at address 0001 | |
| VFS: Mounted root (ext4 filesystem) readonly on device 179:2. | |
| mmcblk mmc1:0001: no of_node; not parsing pinctrl DT | |
| brcmfmac mmc1:0001:2: no of_node; not parsing pinctrl DT | |
| brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/2 | |
| devtmpfs: mounted | |
| usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.02 | |
| usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
| Freeing unused kernel memory: 2136K | |
| usb 1-1: Product: USB2.0 Hub | |
| usb 1-1: Manufacturer: GenesysLogic | |
| usb 1-1: no of_node; not parsing pinctrl DT | |
| Checked W+X mappings: passed, no W+X pages found | |
| hub 1-1:1.0: no of_node; not parsing pinctrl DT | |
| rodata_test: all tests were successful | |
| Run /sbin/init as init process | |
| hub 1-1:1.0: USB hub found | |
| with arguments: | |
| hub 1-1:1.0: 4 ports detected | |
| /sbin/init | |
| with environment: | |
| HOME=/ | |
| TERM=linux | |
| usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd | |
| usb 2-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice= 4.02 | |
| usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
| usb 2-1: Product: USB3.0 Hub | |
| usb 2-1: Manufacturer: GenesysLogic | |
| usb 2-1: no of_node; not parsing pinctrl DT | |
| hub 2-1:1.0: no of_node; not parsing pinctrl DT | |
| hub 2-1:1.0: USB hub found | |
| hub 2-1:1.0: 4 ports detected | |
| brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 | |
| brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 | |
| systemd[1]: System time before build time, advancing clock. | |
| systemd[1]: systemd v246.6-3.0.riscv64.fc33 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD -SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) | |
| systemd[1]: Detected architecture riscv64. | |
| Welcome to Fedora 33 (Rawhide)! | |
| systemd[1]: Set hostname to <fedora-starfive>. | |
| random: zram-generator: uninitialized urandom read (16 bytes read) | |
| zram_generator::generator[90]: Creating dev-zram0.swap for /dev/zram0 (3616MB) | |
| random: lvmconfig: uninitialized urandom read (4 bytes read) | |
| systemd[71]: /usr/lib/systemd/system-generators/zram-generator failed with exit status 1. | |
| systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.service:27: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.service:28: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.service:23: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.service:24: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-pivot.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-pivot.service:31: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: /usr/lib/systemd/system/gssproxy.service:13: PIDFile= references a path below legacy directory /var/run/, updating /var/run/gssproxy.pid → /run/gssproxy.pid; please update the unit file accordingly. | |
| systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.service:24: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.service:25: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.service:26: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.service:27: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. | |
| systemd[1]: /usr/lib/systemd/system/ip6tables.service:14: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: /usr/lib/systemd/system/ip6tables.service:15: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: /usr/lib/systemd/system/iptables.service:14: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: /usr/lib/systemd/system/iptables.service:15: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| systemd[1]: Queued start job for default target Graphical Interface. | |
| random: systemd: uninitialized urandom read (16 bytes read) | |
| systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. | |
| systemd[1]: (This warning is only shown for the first unit using IP firewalling.) | |
| systemd[1]: Created slice system-getty.slice. | |
| [ OK ] Created slice system-getty.slice. | |
| random: systemd: uninitialized urandom read (16 bytes read) | |
| systemd[1]: Created slice system-modprobe.slice. | |
| [ OK ] Created slice system-modprobe.slice. | |
| random: systemd: uninitialized urandom read (16 bytes read) | |
| systemd[1]: Created slice system-serial\x2dgetty.slice. | |
| [ OK ] Created slice system-serial\x2dgetty.slice. | |
| systemd[1]: Created slice system-sshd\x2dkeygen.slice. | |
| [ OK ] Created slice system-sshd\x2dkeygen.slice. | |
| systemd[1]: Created slice system-swap\x2dcreate.slice. | |
| [ OK ] Created slice system-swap\x2dcreate.slice. | |
| systemd[1]: Created slice User and Session Slice. | |
| [ OK ] Created slice User and Session Slice. | |
| systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [ OK ] Started Forward Password R…uests to Wall Directory Watch. | |
| systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. | |
| systemd[1]: Reached target Slices. | |
| [ OK ] Reached target Slices. | |
| systemd[1]: Listening on Device-mapper event daemon FIFOs. | |
| [ OK ] Listening on Device-mapper event daemon FIFOs. | |
| systemd[1]: Listening on LVM2 poll daemon socket. | |
| [ OK ] Listening on LVM2 poll daemon socket. | |
| systemd[1]: Listening on multipathd control socket. | |
| [ OK ] Listening on multipathd control socket. | |
| systemd[1]: Listening on Process Core Dump Socket. | |
| [ OK ] Listening on Process Core Dump Socket. | |
| systemd[1]: Listening on initctl Compatibility Named Pipe. | |
| [ OK ] Listening on initctl Compatibility Named Pipe. | |
| systemd[1]: Condition check resulted in Journal Audit Socket being skipped. | |
| systemd[1]: Listening on Journal Socket (/dev/log). | |
| [ OK ] Listening on Journal Socket (/dev/log). | |
| systemd[1]: Listening on Journal Socket. | |
| [ OK ] Listening on Journal Socket. | |
| systemd[1]: Listening on udev Control Socket. | |
| [ OK ] Listening on udev Control Socket. | |
| systemd[1]: Listening on udev Kernel Socket. | |
| [ OK ] Listening on udev Kernel Socket. | |
| systemd[1]: Listening on User Database Manager Socket. | |
| [ OK ] Listening on User Database Manager Socket. | |
| systemd[1]: Condition check resulted in Huge Pages File System being skipped. | |
| systemd[1]: Mounting POSIX Message Queue File System... | |
| Mounting POSIX Message Queue File System... | |
| systemd[1]: Mounting Kernel Debug File System... | |
| Mounting Kernel Debug File System... | |
| systemd[1]: Condition check resulted in Kernel Trace File System being skipped. | |
| systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. | |
| systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. | |
| systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... | |
| Starting Monitoring of LVM…meventd or progress polling... | |
| systemd[1]: Starting Load Kernel Module drm... | |
| Starting Load Kernel Module drm... | |
| systemd[1]: Starting Preprocess NFS configuration convertion... | |
| Starting Preprocess NFS configuration convertion... | |
| systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. | |
| systemd[1]: Starting Load Kernel Modules... | |
| Starting Load Kernel Modules... | |
| systemd[1]: Starting Remount Root and Kernel File Systems... | |
| Starting Remount Root and Kernel File Systems... | |
| systemd[1]: Condition check resulted in Repartition Root Disk being skipped. | |
| systemd[1]: Starting Coldplug All udev Devices... | |
| Starting Coldplug All udev Devices... | |
| systemd[1]: Starting Setup Virtual Console... | |
| Starting Setup Virtual Console... | |
| systemd[1]: Mounted POSIX Message Queue File System. | |
| [ OK ] Mounted POSIX Message Queue File System. | |
| systemd[1]: Mounted Kernel Debug File System. | |
| [ OK ] Mounted Kernel Debug File System. | |
| systemd[1]: modprobe@drm.service: Succeeded. | |
| systemd[1]: Finished Load Kernel Module drm. | |
| [ OK ] Finished Load Kernel Module drm. | |
| systemd[1]: nfs-convert.service: Succeeded. | |
| systemd[1]: Finished Preprocess NFS configuration convertion. | |
| [ OK ] Finished Preprocess NFS configuration convertion. | |
| systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE | |
| systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. | |
| systemd[1]: Failed to start Load Kernel Modules. | |
| [FAILED] Failed to start Load Kernel Modules. | |
| See 'systemctl status systemd-modules-load.service' for details. | |
| systemd[1]: Condition check resulted in FUSE Control File System being skipped. | |
| systemd[1]: Condition check resulted in Kernel Configuration File System being skipped. | |
| systemd[1]: Starting Apply Kernel Variables... | |
| Starting Apply Kernel Variables... | |
| systemd[1]: Finished Apply Kernel Variables. | |
| [ OK ] Finished Apply Kernel Variables. | |
| systemd[1]: Finished Coldplug All udev Devices. | |
| [ OK ] Finished Coldplug All udev Devices. | |
| systemd[1]: Starting Wait for udev To Complete Device Initialization... | |
| Starting Wait for udev To …plete Device Initialization... | |
| EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: disabled. | |
| systemd[1]: Finished Remount Root and Kernel File Systems. | |
| [ OK ] Finished Remount Root and Kernel File Systems. | |
| systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped. | |
| systemd[1]: Condition check resulted in First Boot Wizard being skipped. | |
| systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. | |
| systemd[1]: Starting Load/Save Random Seed... | |
| Starting Load/Save Random Seed... | |
| systemd[1]: Condition check resulted in Create System Users being skipped. | |
| systemd[1]: Starting Create Static Device Nodes in /dev... | |
| Starting Create Static Device Nodes in /dev... | |
| systemd[1]: Finished Setup Virtual Console. | |
| [ OK ] Finished Setup Virtual Console. | |
| systemd[1]: Finished Create Static Device Nodes in /dev. | |
| [ OK ] Finished Create Static Device Nodes in /dev. | |
| systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm. | |
| [ OK ] Started Entropy Daemon based on the HAVEGE algorithm. | |
| systemd[1]: Starting Journal Service... | |
| Starting Journal Service... | |
| systemd[1]: Starting Rule-based Manager for Device Events and Files... | |
| Starting Rule-based Manage…for Device Events and Files... | |
| systemd[1]: Started Rule-based Manager for Device Events and Files. | |
| [ OK ] Started Rule-based Manager for Device Events and Files. | |
| systemd[1]: Starting Show Plymouth Boot Screen... | |
| Starting Show Plymouth Boot Screen... | |
| systemd[1]: Received SIGRTMIN+20 from PID 127 (plymouthd). | |
| random: crng init done | |
| random: 5 urandom warning(s) missed due to ratelimiting | |
| systemd[1]: Started Show Plymouth Boot Screen. | |
| [ OK ] Started Show Plymouth Boot Screenystemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. | |
| 0m. | |
| systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. | |
| [ OK ] Started Forward Password R…s to Plymouth Directory Watch. | |
| systemd[1]: Reached target Local Encrypted Volumes. | |
| [ OK ] Reached target Local Encrypted Volusystemd[1]: Reached target Paths. | |
| mes. | |
| systemd[1]: Started Journal Service. | |
| [ OK ] Started Journal Service. | |
| [ OK ] Finished Load/Save Random Seed. | |
| Starting Flush Journal to Persistent Storage... | |
| [ OK ] Found device /dev/ttyS0. | |
| [ OK ] Found device /dev/disk/by-…9-0c8b-47b2-8958-0630891b025c. | |
| [ OK ] Finished Monitoring of LVM… dmeventd or progress polling. | |
| [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. | |
| [ OK ] Finished Wait for udev To Complete Device Initialization. | |
| [ OK ] Reached target Local File Systems (Pre). | |
| Mounting /boot... | |
| EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. | |
| ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff) | |
| [ OK ] Mounted /boot. | |
| [ OK ] Finished Flush Journal to Persistent Storage. | |
| [ TIME ] Timed out waiting for device /dev/zram0. | |
| [DEPEND] Dependency failed for Compressed swap on /dev/zram0. | |
| [DEPEND] Dependency failed for Create swap on /dev/zram0. | |
| [ OK ] Reached target Swap. | |
| Mounting Temporary Directory (/tmp)... | |
| [ OK ] Mounted Temporary Directory (/tmp). | |
| [ OK ] Reached target Local File Systems. | |
| Starting Restore /run/initramfs on shutdown... | |
| Starting Tell Plymouth To Write Out Runtime Data... | |
| Starting Create Volatile Files and Directories... | |
| [ OK ] Finished Restore /run/initramfs on shutdown. | |
| [ OK ] Finished Tell Plymouth To Write Out Runtime Data. | |
| [ OK ] Finished Create Volatile Files and Directories. | |
| Mounting RPC Pipe File System... | |
| Starting Security Auditing Service... | |
| [ OK ] Mounted RPC Pipe File System. | |
| [ OK ] Reached target rpc_pipefs.target. | |
| [FAILED] Failed to start Security Auditing Service. | |
| See 'systemctl status auditd.service' for details. | |
| Starting Update UTMP about System Boot/Shutdown... | |
| [ OK ] Finished Update UTMP about System Boot/Shutdown. | |
| [ OK ] Reached target System Initialization. | |
| [ OK ] Started dnf makecache --timer. | |
| [ OK ] Started Discard unused blocks once a week. | |
| [ OK ] Started Run system activit…ounting tool every 10 minutes. | |
| [ OK ] Started Generate summary o…esterday's process accounting. | |
| [ OK ] Started Daily Cleanup of Temporary Directories. | |
| [ OK ] Started daily update of the root trust anchor for DNSSEC. | |
| [ OK ] Reached target Timers. | |
| [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. | |
| [ OK ] Listening on D-Bus System Message Bus Socket. | |
| [ OK ] Listening on SSSD Kerberos…ache Manager responder socket. | |
| [ OK ] Reached target Sockets. | |
| Starting D-Bus System Message Bus... | |
| [ OK ] Started D-Bus System Message Bus. | |
| [ OK ] Reached target Basic System. | |
| Starting Modem Manager... | |
| Starting Avahi mDNS/DNS-SD Stack... | |
| Starting Builds and instal…kernel modules through DKMS... | |
| Starting firewalld - dynamic firewall daemon... | |
| Starting GSSAPI Proxy Daemon... | |
| Starting LSB: Init script for live image.... | |
| Starting RealtimeKit Scheduling Policy Service... | |
| [ OK ] Reached target sshd-keygen.target. | |
| Starting System Security Services Daemon... | |
| Starting Resets System Activity Logs... | |
| Starting Home Area Manager... | |
| Starting Disk Manager... | |
| Starting Daemon for power management... | |
| [ OK ] Started RealtimeKit Scheduling Policy Service. | |
| [FAILED] Failed to start Daemon for power management. | |
| See 'systemctl status upower.service' for details. | |
| [ OK ] Stopped Daemon for power management. | |
| Starting Daemon for power management... | |
| [ OK ] Started Avahi mDNS/DNS-SD Stack. | |
| [FAILED] Failed to start Daemon for power management. | |
| See 'systemctl status upower.service' for details. | |
| [ OK ] Stopped Daemon for power management. | |
| Starting Daemon for power management... | |
| [FAILED] Failed to start Daemon for power management. | |
| See 'systemctl status upower.service' for details. | |
| [ OK ] Stopped Daemon for power management. | |
| Starting Daemon for power management... | |
| [FAILED] Failed to start Daemon for power management. | |
| See 'systemctl status upower.service' for details. | |
| [ OK ] Stopped Daemon for power management. | |
| Starting Daemon for power management... | |
| [FAILED] Failed to start Daemon for power management. | |
| See 'systemctl status upower.service' for details. | |
| [ OK ] Stopped Daemon for power management. | |
| [FAILED] Failed to start Daemon for power management. | |
| See 'systemctl status upower.service' for details. | |
| [ OK ] Started Home Area Manager. | |
| [ OK ] Started Modem Manager. | |
| [ OK ] Finished Resets System Activity Logs. | |
| [ OK ] Finished Builds and instal…w kernel modules through DKMS. | |
| [ OK ] Started GSSAPI Proxy Daemon. | |
| [ OK ] Reached target NFS client services. | |
| [ OK ] Reached target Remote File Systems (Pre). | |
| [ OK ] Reached target Remote File Systems. | |
| [ OK ] Started LSB: Init script for live image.. | |
| Starting NTP client/server... | |
| [ OK ] Started NTP client/server. | |
| Starting Authorization Manager... | |
| [ OK ] Started System Security Services Daemon. | |
| [ OK ] Reached target User and Group Name Lookups. | |
| Starting Accounts Service... | |
| Starting User Login Management... | |
| [ OK ] Started User Login Management. | |
| [ OK ] Started Authorization Manager. | |
| [ OK ] Started Accounts Service. | |
| [ OK ] Started Disk Manager. | |
| [ OK ] Started firewalld - dynamic firewall daemon. | |
| [ OK ] Reached target Network (Pre). | |
| Starting Network Manager... | |
| [ OK ] Started Network Manager. | |
| [ OK ] Reached target Network. | |
| Starting Network Manager Wait Online... | |
| Starting OpenSSH server daemon... | |
| Starting Permit User Sessions... | |
| [ OK ] Finished Permit User Sessions. | |
| Starting Light Display Manager... | |
| Starting Hold until boot process finishes up... | |
| Starting Hostname Service... | |
| [ OK ] Started OpenSSH server daemon. | |
| stmmaceth 10020000.ethernet eth0: PHY [stmmac-0:00] driver [Micrel KSZ9031 Gigabit PHY] (irq=POLL) | |
| stmmaceth 10020000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 | |
| dwmac1000: Master AXI performs fixed burst length | |
| stmmaceth 10020000.ethernet eth0: No Safety Features support found | |
| stmmaceth 10020000.ethernet eth0: No MAC Management Counters available | |
| stmmaceth 10020000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported | |
| stmmaceth 10020000.ethernet eth0: configuring for phy/rgmii-txid link mode | |
| [ OK ] Started Show Plymouth Boot Screen. | |
| [ OK ] Started Forward Password R…s to Plymouth Directory Watch. | |
| [ OK ] Reached target Local Encrypted Volumes. | |
| [ OK ] Reached target Paths. | |
| [ OK ] Started Journal Service. | |
| [ OK ] Finished Load/Save Random Seed. | |
| Starting Flush Journal to Persistent Storage... | |
| [ OK ] Found device /dev/ttyS0. | |
| [ OK ] Found device /dev/disk/by-…9-0c8b-47b2-8958-0630891b025c. | |
| [ OK ] Finished Monitoring of LVM… dmeventd or progress polling. | |
| [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. | |
| [ OK ] Finished Wait for udev To Complete Device Initialization. | |
| [ OK ] Reached target Local File Systems (Pre). | |
| Mounting /boot... | |
| [ OK ] Mounted /boot. | |
| [ OK ] Finished Flush Journal to Persistent Storage. | |
| [ TIME ] Timed out waiting for device /dev/zram0. | |
| [DEPEND] Dependency failed for Compressed swap on /dev/zram0. | |
| [DEPEND] Dependency failed for Create swap on /dev/zram0. | |
| [ OK ] Reached target Swap. | |
| Mounting Temporary Directory (/tmp)... | |
| [ OK ] Mounted Temporary Directory (/tmp). | |
| [ OK ] Reached target Local File Systems. | |
| Starting Restore /run/initramfs on shutdown... | |
| Starting Tell Plymouth To Write Out Runtime Data... | |
| Starting Create Volatile Files and Directories... | |
| [ OK ] Finished Restore /run/initramfs on shutdown. | |
| [ OK ] Finished Tell Plymouth To Write Out Runtime Data. | |
| [ OK ] Finished Create Volatile Files and Directories. | |
| Mounting RPC Pipe File System... | |
| Starting Security Auditing Service... | |
| [ OK ] Mounted RPC Pipe File System. | |
| [ OK ] Reached target rpc_pipefs.target. | |
| [FAILED] Failed to start Security Auditing Service. | |
| See 'systemctl status auditd.service' for details. | |
| Starting Update UTMP about System Boot/Shutdown... | |
| [ OK ] Finished Update UTMP about System Boot/Shutdown. | |
| [ OK ] Reached target System Initialization. | |
| [ OK ] Started dnf makecache --timer. | |
| [ OK ] Started Discard unused blocks once a week. | |
| [ OK ] Started Run system activit…ounting tool every 10 minutes. | |
| [ OK ] Started Generate summary o…esterday's process accounting. | |
| [ OK ] Started Daily Cleanup of Temporary Directories. | |
| [ OK ] Started daily update of the root trust anchor for DNSSEC. | |
| [ OK ] Reached target Timers. | |
| [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. | |
| [ OK ] Listening on D-Bus System Message Bus Socket. | |
| [ OK ] Listening on SSSD Kerberos…ache Manager responder socket. | |
| [ OK ] Reached target Sockets. | |
| Starting D-Bus System Message Bus... | |
| [ OK ] Started D-Bus System Message Bus. | |
| [ OK ] Reached target Basic System. | |
| Starting Modem Manager... | |
| Starting Avahi mDNS/DNS-SD Stack... | |
| Starting Builds and instal…kernel modules through DKMS... | |
| Starting firewalld - dynamic firewall daemon... | |
| Starting GSSAPI Proxy Daemon... | |
| Starting LSB: Init script for live image.... | |
| Starting RealtimeKit Scheduling Policy Service... | |
| [ OK ] Reached target sshd-keygen.target. | |
| Starting System Security Services Daemon... | |
| Starting Resets System Activity Logs... | |
| Starting Home Area Manager... | |
| Starting Disk Manager... | |
| Starting Daemon for power management... | |
| [ OK ] Started RealtimeKit Scheduling Policy Service. | |
| [FAILED] Failed to start Daemon for power management. | |
| See 'systemctl status upower.service' for details. | |
| [ OK ] Stopped Daemon for power management. | |
| Starting Daemon for power management... | |
| [ OK ] Started Avahi mDNS/DNS-SD Stack. | |
| [FAILED] Failed to start Daemon for power management. | |
| See 'systemctl status upower.service' for details. | |
| [ OK ] Stopped Daemon for power management. | |
| Starting Daemon for power management... | |
| [FAILED] Failed to start Daemon for power management. | |
| See 'systemctl status upower.service' for details. | |
| [ OK ] Stopped Daemon for power management. | |
| Starting Daemon for power management... | |
| [FAILED] Failed to start Daemon for power management. | |
| See 'systemctl status upower.service' for details. | |
| [ OK ] Stopped Daemon for power management. | |
| Starting Daemon for power management... | |
| [FAILED] Failed to start Daemon for power management. | |
| See 'systemctl status upower.service' for details. | |
| [ OK ] Stopped Daemon for power management. | |
| [FAILED] Failed to start Daemon for power management. | |
| See 'systemctl status upower.service' for details. | |
| [ OK ] Started Home Area Manager. | |
| [ OK ] Started Modem Manager. | |
| [ OK ] Finished Resets System Activity Logs. | |
| [ OK ] Finished Builds and instal…w kernel modules through DKMS. | |
| [ OK ] Started GSSAPI Proxy Daemon. | |
| [ OK ] Reached target NFS client services. | |
| [ OK ] Reached target Remote File Systems (Pre). | |
| [ OK ] Reached target Remote File Systems. | |
| [ OK ] Started LSB: Init script for live image.. | |
| Starting NTP client/server... | |
| [ OK ] Started NTP client/server. | |
| Starting Authorization Manager... | |
| [ OK ] Started System Security Services Daemon. | |
| [ OK ] Reached target User and Group Name Lookups. | |
| Starting Accounts Service... | |
| Starting User Login Management... | |
| [ OK ] Started User Login Management. | |
| [ OK ] Started Authorization Manager. | |
| [ OK ] Started Accounts Service. | |
| [ OK ] Started Disk Manager. | |
| [ OK ] Started firewalld - dynamic firewall daemon. | |
| [ OK ] Reached target Network (Pre). | |
| Starting Network Manager... | |
| [ OK ] Started Network Manager. | |
| [ OK ] Reached target Network. | |
| Starting Network Manager Wait Online... | |
| Starting OpenSSH server daemon... | |
| Starting Permit User Sessions... | |
| [ OK ] Finished Permit User Sessions. | |
| Starting Light Display Manager... | |
| Starting Hold until boot process finishes up... | |
| Starting Hostname Service... | |
| [ OK ] Started OpenSSH server daemon. | |
| stmmaceth 10020000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx | |
| IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| Welcome to the Fedora/RISC-V disk image | |
| https://fedoraproject.org/wiki/Architectures/RISC-V | |
| Build date: Sun May 16 19:02:18 UTC 2021 | |
| Kernel 5.13.0-rc2-starlight-drew-307180-ga9ca03607710 on an riscv64 (ttyS0) | |
| The root password is 'starfive'. | |
| root password logins are disabled in SSH starting Fedora 31. | |
| User 'riscv' with password 'starfive' in 'wheel' group is provided. | |
| To install new packages use 'dnf install ...' | |
| To upgrade disk image use 'dnf upgrade --best' | |
| If DNS isn’t working, try editing ‘/etc/yum.repos.d/fedora-riscv.repo’. | |
| For updates and latest information read: | |
| https://fedoraproject.org/wiki/Architectures/RISC-V | |
| Fedora/RISC-V | |
| ------------- | |
| Koji: http://fedora.riscv.rocks/koji/ | |
| SCM: http://fedora.riscv.rocks:3000/ | |
| Distribution rep.: http://fedora.riscv.rocks/repos-dist/ | |
| Koji internal rep.: http://fedora.riscv.rocks/repos/ | |
| fedora-starfive login: pdp7@x1:~/dev/beaglebone/omap2plus-mainline-linux$ cat /tmp/xx | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment