gistfile1.txt

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.4.51-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1333 SMP Mon Aug 10 16:45:19 BST 2020
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x37400000, size 64 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] On node 0 totalpages: 242688
[    0.000000]   Normal zone: 2133 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 242688 pages, LIFO batch:63
[    0.000000] percpu: Embedded 20 pages/cpu s49856 r8192 d23872 u81920
[    0.000000] pcpu-alloc: s49856 r8192 d23872 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=0a77eaf5-02 rootfstype=ext4 elevator=deadline fsck.repair=yes brcmfmac.debug=0x100000 rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 881512K/970752K available (8192K kernel code, 689K rwdata, 2552K rodata, 1024K init, 825K bss, 23704K reserved, 65536K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 28275 entries in 56 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] random: get_random_bytes called from start_kernel+0x328/0x500 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000022] Switching to timer-based delay loop, resolution 52ns
[    0.000290] Console: colour dummy device 80x30
[    0.000876] printk: console [tty1] enabled
[    0.000942] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000990] pid_max: default: 32768 minimum: 301
[    0.001390] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001436] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.002821] Disabling memory control group subsystem
[    0.002942] CPU: Testing write buffer coherency: ok
[    0.003522] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.004479] Setting up static identity map for 0x100000 - 0x10003c
[    0.004696] rcu: Hierarchical SRCU implementation.
[    0.005392] smp: Bringing up secondary CPUs ...
[    0.006534] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.007810] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.008964] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.009116] smp: Brought up 1 node, 4 CPUs
[    0.009205] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.009234] CPU: All CPU(s) started in HYP mode.
[    0.009258] CPU: Virtualization extensions available.
[    0.010369] devtmpfs: initialized
[    0.026908] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.027215] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.027273] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030408] pinctrl core: initialized pinctrl subsystem
[    0.031616] NET: Registered protocol family 16
[    0.035901] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.042230] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.042271] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.042547] Serial: AMBA PL011 UART driver
[    0.044718] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.070100] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-08-19 17:40, variant start
[    0.080113] raspberrypi-firmware soc:firmware: Firmware hash is e90cba19a98a0d1f2ef086b9cafcbca00778f094
[    0.131684] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[    0.133922] SCSI subsystem initialized
[    0.134197] usbcore: registered new interface driver usbfs
[    0.134280] usbcore: registered new interface driver hub
[    0.134436] usbcore: registered new device driver usb
[    0.136433] clocksource: Switched to clocksource arch_sys_counter
[    1.296523] VFS: Disk quotas dquot_6.6.0
[    1.296668] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.296924] FS-Cache: Loaded
[    1.297171] CacheFiles: Loaded
[    1.306977] thermal_sys: Registered thermal governor 'step_wise'
[    1.307384] NET: Registered protocol family 2
[    1.308343] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    1.308417] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.308563] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.308773] TCP: Hash tables configured (established 8192 bind 8192)
[    1.308955] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.309027] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.309336] NET: Registered protocol family 1
[    1.310183] RPC: Registered named UNIX socket transport module.
[    1.310215] RPC: Registered udp transport module.
[    1.310241] RPC: Registered tcp transport module.
[    1.310266] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.312076] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    1.315409] Initialise system trusted keyrings
[    1.315668] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    1.327548] FS-Cache: Netfs 'nfs' registered for caching
[    1.328377] NFS: Registering the id_resolver key type
[    1.328447] Key type id_resolver registered
[    1.328474] Key type id_legacy registered
[    1.328510] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.329833] Key type asymmetric registered
[    1.329864] Asymmetric key parser 'x509' registered
[    1.329931] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.329969] io scheduler mq-deadline registered
[    1.329996] io scheduler kyber registered
[    1.335163] bcm2708_fb soc:fb: FB found 1 display(s)
[    1.400828] Console: switching to colour frame buffer device 228x61
[    1.429620] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1824x984
[    1.435379] bcm2835-rng 3f104000.rng: hwrng registered
[    1.436091] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    1.437116] vc-sm: Videocore shared memory driver
[    1.437772] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    1.451179] brd: module loaded
[    1.464188] loop: module loaded
[    1.465733] Loading iSCSI transport class v2.0-870.
[    1.466912] libphy: Fixed MDIO Bus: probed
[    1.467157] usbcore: registered new interface driver lan78xx
[    1.467381] usbcore: registered new interface driver smsc95xx
[    1.467562] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    2.196014] Core Release: 2.80a
[    2.196131] Setting default values for core params
[    2.196306] Finished setting default values for core params
[    2.396907] Using Buffer DMA mode
[    2.397021] Periodic Transfer Interrupt Enhancement - disabled
[    2.397197] Multiprocessor Interrupt Enhancement - disabled
[    2.397366] OTG VER PARAM: 0, OTG VER FLAG: 0
[    2.397517] Dedicated Tx FIFOs mode
[    2.398316] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = b7504000 dma = 0xf7504000 len=9024
[    2.398617] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
               High-Speed Isochronous Endpoints
               Interrupt/Control Split Transaction hack enabled
[    2.406471] dwc_otg: Microframe scheduler enabled
[    2.406543] WARN::hcd_init_fiq:457: FIQ on core 1
[    2.413875] WARN::hcd_init_fiq:458: FIQ ASM at 806d89f4 length 36
[    2.421087] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000
[    2.428288] dwc_otg 3f980000.usb: DWC OTG Controller
[    2.435371] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    2.442590] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[    2.449748] Init: Port Power? op_state=1
[    2.456712] Init: Power Port (0)
[    2.463983] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    2.471061] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.478221] usb usb1: Product: DWC OTG Controller
[    2.485341] usb usb1: Manufacturer: Linux 5.4.51-v7+ dwc_otg_hcd
[    2.492597] usb usb1: SerialNumber: 3f980000.usb
[    2.500461] hub 1-0:1.0: USB hub found
[    2.507570] hub 1-0:1.0: 1 port detected
[    2.515352] dwc_otg: FIQ enabled
[    2.515363] dwc_otg: NAK holdoff enabled
[    2.515372] dwc_otg: FIQ split-transaction FSM enabled
[    2.515387] Module dwc_common_port init
[    2.515749] usbcore: registered new interface driver usb-storage
[    2.522979] mousedev: PS/2 mouse device common for all mice
[    2.531569] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    2.540893] sdhci: Secure Digital Host Controller Interface driver
[    2.548037] sdhci: Copyright(c) Pierre Ossman
[    2.555691] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
[    2.563557] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[    2.570948] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.580086] ledtrig-cpu: registered to indicate activity on CPUs
[    2.587666] hidraw: raw HID events driver (C) Jiri Kosina
[    2.595036] usbcore: registered new interface driver usbhid
[    2.602156] usbhid: USB HID core driver
[    2.610425] vchiq: vchiq_init_state: slot_zero = (ptrval)
[    2.619656] [vc_sm_connected_init]: start
[    2.631106] [vc_sm_connected_init]: end - returning 0
[    2.640246] Initializing XFRM netlink socket
[    2.647340] NET: Registered protocol family 17
[    2.654341] Key type dns_resolver registered
[    2.661919] Registering SWP/SWPB emulation handler
[    2.669028] registered taskstats version 1
[    2.675724] Loading compiled-in X.509 certificates
[    2.683011] Key type ._fscrypt registered
[    2.689702] Key type .fscrypt registered
[    2.707218] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    2.714150] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
[    2.723169] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    2.731818] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    2.738848] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[    2.746280] Indeed it is in host mode hprt0 = 00021501
[    2.827419] sdhost: log_buf @ (ptrval) (f7507000)
[    2.838409] random: fast init done
[    2.870450] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.879091] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.887603] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.894465] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    2.903768] of_cfs_init
[    2.910678] of_cfs_init: OK
[    2.918173] Waiting for root device PARTUUID=0a77eaf5-02...
[    2.923699] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.956484] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.963378] Indeed it is in host mode hprt0 = 00001101
[    3.037235] mmc0: host does not support reading read-only switch, assuming write-enable
[    3.047355] mmc0: new high speed SDXC card at address 0001
[    3.055480] mmcblk0: mmc0:0001 00000 59.6 GiB
[    3.065375]  mmcblk0: p1 p2
[    3.112996] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.120198] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    3.132507] mmc1: new high speed SDIO card at address 0001
[    3.135590] devtmpfs: mounted
[    3.154650] Freeing unused kernel memory: 1024K
[    3.162067] Run /sbin/init as init process
[    3.206865] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[    3.214089] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.222016] hub 1-1:1.0: USB hub found
[    3.229343] hub 1-1:1.0: 5 ports detected
[    3.556507] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    3.686869] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[    3.694238] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.704288] smsc95xx v1.0.6
[    3.799313] systemd[1]: System time before build time, advancing clock.
[    3.801204] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f3:bc:82
[    3.906502] usb 1-1.5: new low-speed USB device number 4 using dwc_otg
[    3.963080] NET: Registered protocol family 10
[    3.972042] Segment Routing with IPv6
[    4.013729] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    4.031128] systemd[1]: Detected architecture arm.
[    4.081104] usb 1-1.5: New USB device found, idVendor=04f2, idProduct=0833, bcdDevice= 2.30
[    4.089266] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.097397] usb 1-1.5: Product: USB Keyboard
[    4.105450] usb 1-1.5: Manufacturer: CHICONY
[    4.155145] input: CHICONY USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:04F2:0833.0001/input/input0
[    4.177504] systemd[1]: Set hostname to <musicbox>.
[    4.217180] hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-3f980000.usb-1.5/input0
[    4.254419] input: CHICONY USB Keyboard System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:04F2:0833.0002/input/input1
[    4.326987] input: CHICONY USB Keyboard Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:04F2:0833.0002/input/input2
[    4.336882] input: CHICONY USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:04F2:0833.0002/input/input3
[    4.351096] hid-generic 0003:04F2:0833.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-3f980000.usb-1.5/input1
[    5.044489] random: systemd: uninitialized urandom read (16 bytes read)
[    5.067286] random: systemd: uninitialized urandom read (16 bytes read)
[    5.077787] systemd[1]: Listening on Journal Socket.
[    5.098829] random: systemd: uninitialized urandom read (16 bytes read)
[    5.110519] systemd[1]: Created slice User and Session Slice.
[    5.137368] systemd[1]: Mounting RPC Pipe File System...
[    5.160488] systemd[1]: Listening on udev Control Socket.
[    5.183131] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.211527] systemd[1]: Starting Restore / save the current clock...
[    5.234925] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.376102] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    6.486815] systemd-journald[117]: Received request to flush runtime journal from PID 1
[    7.155217] mc: Linux media interface: v0.10
[    7.159239] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    7.165194] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    7.165222] [vc_sm_connected_init]: start
[    7.171113] [vc_sm_connected_init]: installed successfully
[    7.227031] videodev: Linux video capture interface: v2.00
[    7.268304] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    7.269140] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    7.269953] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    7.310083] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    7.311607] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[    7.317005] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    7.324624] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    7.331695] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[    7.332312] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[    7.332836] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[    7.333543] bcm2835_audio bcm2835_audio: card created with 4 channels
[    7.335020] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[    7.335052] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    7.335074] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    7.335092] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    7.335110] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    7.337377] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[    7.351207] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    7.351259] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    7.352358] bcm2835_audio bcm2835_audio: card created with 4 channels
[    7.360987] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    7.361065] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    7.368870] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    7.368929] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    7.714138] snd-rpi-hifiberry-dacplus soc:sound: ASoC: failed to init link HiFiBerry DAC+: -517
[    8.089392] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    8.277073] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    8.285137] smsc95xx 1-1.1:1.0 enxb827ebf3bc82: renamed from eth0
[    8.486555] snd-rpi-hifiberry-dacplus soc:sound: ASoC: failed to init link HiFiBerry DAC+: -517
[    8.491054] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[    8.503560] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[    8.503915] usbcore: registered new interface driver brcmfmac
[    8.505333] snd-rpi-hifiberry-dacplus soc:sound: ASoC: failed to init link HiFiBerry DAC+: -517
[    8.527011] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.txt failed with error -2
[    8.746207] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[    8.746363] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[    8.747729] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 22 2019 01:59:28 version 7.45.98.94 (r723000 CY) FWID 01-3b33decd
[    8.817023] brcmfmac: CONSOLE: hndarm_armr addr: 0x18003000, cr4_idx: 0
[    8.817047] brcmfmac: CONSOLE: 000000.001 
[    8.817060] brcmfmac: CONSOLE: RTE (SDIO-CDC) 7.45.98.94 (r723000 CY) on BCM43430 r1 @ 37.4/81.6/81.6MHz
[    8.817072] brcmfmac: CONSOLE: 000000.003 sdpcmdcdc0: Broadcom SDPCMD CDC driver
[    8.817084] brcmfmac: CONSOLE: 000000.008 reclaim section 0: Returned 46092 bytes to the heap
[    8.817095] brcmfmac: CONSOLE: 000000.012 wlc_bmac_info_init: host_enab 1
[    8.817108] brcmfmac: CONSOLE: 000000.064 wl0: Broadcom BCM43430 802.11 Wireless Controller 7.45.98.94 (r723000 CY)
[    8.817119] brcmfmac: CONSOLE: 000000.067 TCAM: 256 used: 212 exceed:0
[    8.817131] brcmfmac: CONSOLE: 000000.069 reclaim section 1: Returned 81228 bytes to the heap
[    9.462221] snd-rpi-hifiberry-dacplus soc:sound: pcm512x-hifi <-> 3f203000.i2s mapping ok
[    9.687353] random: crng init done
[    9.687367] random: 7 urandom warning(s) missed due to ratelimiting
[   10.386557] 8021q: 802.1Q VLAN Support v1.8
[   10.511602] uart-pl011 3f201000.serial: no DMA platform data
[   10.736532] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
[   10.806839] brcmfmac: CONSOLE: 000002.140 wl0: wl_open
[   12.915531] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   13.106862] brcmfmac: CONSOLE: 000004.438 wl0: wl_open
[   14.705305] Bluetooth: Core ver 2.22
[   14.705413] NET: Registered protocol family 31
[   14.705424] Bluetooth: HCI device and connection manager initialized
[   14.705457] Bluetooth: HCI socket layer initialized
[   14.705476] Bluetooth: L2CAP socket layer initialized
[   14.705511] Bluetooth: SCO socket layer initialized
[   14.716631] Bluetooth: HCI UART driver ver 2.3
[   14.716647] Bluetooth: HCI UART protocol H4 registered
[   14.716902] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   14.717729] Bluetooth: HCI UART protocol Broadcom registered
[   15.028601] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.028619] Bluetooth: BNEP filters: protocol multicast
[   15.028644] Bluetooth: BNEP socket layer initialized
[   15.457975] smsc95xx 1-1.1:1.0 enxb827ebf3bc82: hardware isn't capable of remote wakeup
[   16.056854] brcmfmac: CONSOLE: 000007.330 wl0: fatal error, reinitializing
[   17.117838] smsc95xx 1-1.1:1.0 enxb827ebf3bc82: link up, 100Mbps, full-duplex, lpa 0xC5E1
[   23.654624] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled
[   23.676848] brcmfmac: CONSOLE: 000007.609 wl0: fatal error, reinitializing
[   23.676859] brcmfmac: CONSOLE: 000010.291 wl0: fatal error, reinitializing
[   23.676865] brcmfmac: CONSOLE: 000012.857 wl0: fatal error, reinitializing
[   24.218384] device wlan0 entered promiscuous mode
[   25.436460] ieee80211 phy0: brcmf_escan_timeout: timer expired
[   32.876493] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[   32.880114] ieee80211 phy0: brcmf_run_escan: error (-110)
[   32.880134] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   36.396522] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[   36.400053] ieee80211 phy0: brcmf_run_escan: error (-110)
[   36.400070] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   39.916525] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[   39.920081] ieee80211 phy0: brcmf_run_escan: error (-110)
[   39.920099] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   43.436519] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[   43.440042] ieee80211 phy0: brcmf_run_escan: error (-110)
[   43.440060] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   46.956503] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[   46.960064] ieee80211 phy0: brcmf_run_escan: error (-110)
[   46.960083] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   50.476529] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[   50.480067] ieee80211 phy0: brcmf_run_escan: error (-110)
[   50.480084] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   53.996508] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[   54.000052] ieee80211 phy0: brcmf_run_escan: error (-110)
[   54.000070] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   57.516490] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[   57.520048] ieee80211 phy0: brcmf_run_escan: error (-110)
[   57.520067] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   61.036542] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[   61.040063] ieee80211 phy0: brcmf_run_escan: error (-110)
[   61.040081] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   64.556519] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[   64.560061] ieee80211 phy0: brcmf_run_escan: error (-110)
[   64.560078] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   68.076513] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[   68.080024] ieee80211 phy0: brcmf_run_escan: error (-110)
[   68.080040] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   71.596507] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[   71.600064] ieee80211 phy0: brcmf_run_escan: error (-110)
[   71.600083] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   75.116692] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[   75.120256] ieee80211 phy0: brcmf_run_escan: error (-110)
[   75.120275] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   78.636995] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[   78.640628] ieee80211 phy0: brcmf_run_escan: error (-110)
[   78.640646] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   82.157249] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[   82.160793] ieee80211 phy0: brcmf_run_escan: error (-110)
[   82.160810] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   85.677445] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[   85.680999] ieee80211 phy0: brcmf_run_escan: error (-110)
[   85.681017] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   89.197703] ieee80211 phy0: brcmf_run_escan: error (-110)
[   89.197722] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   92.717718] ieee80211 phy0: brcmf_run_escan: error (-110)
[   92.717734] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   96.237866] ieee80211 phy0: brcmf_run_escan: error (-110)
[   96.237885] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[   99.757959] ieee80211 phy0: brcmf_run_escan: error (-110)
[   99.757980] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  103.278033] ieee80211 phy0: brcmf_run_escan: error (-110)
[  103.278054] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  106.798070] ieee80211 phy0: brcmf_run_escan: error (-110)
[  106.798090] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  110.318121] ieee80211 phy0: brcmf_run_escan: error (-110)
[  110.318141] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  113.838127] ieee80211 phy0: brcmf_run_escan: error (-110)
[  113.838146] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  117.358127] ieee80211 phy0: brcmf_run_escan: error (-110)
[  117.358147] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  120.878178] ieee80211 phy0: brcmf_run_escan: error (-110)
[  120.878197] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  124.398164] ieee80211 phy0: brcmf_run_escan: error (-110)
[  124.398184] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  127.918205] ieee80211 phy0: brcmf_run_escan: error (-110)
[  127.918225] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  131.438231] ieee80211 phy0: brcmf_run_escan: error (-110)
[  131.438250] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  134.958252] ieee80211 phy0: brcmf_run_escan: error (-110)
[  134.958271] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  138.478308] ieee80211 phy0: brcmf_run_escan: error (-110)
[  138.478329] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  141.998513] ieee80211 phy0: brcmf_run_escan: error (-110)
[  141.998532] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  145.518628] ieee80211 phy0: brcmf_run_escan: error (-110)
[  145.518651] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  149.038800] ieee80211 phy0: brcmf_run_escan: error (-110)
[  149.038819] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  152.558895] ieee80211 phy0: brcmf_run_escan: error (-110)
[  152.558917] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  156.079075] ieee80211 phy0: brcmf_run_escan: error (-110)
[  156.079094] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  159.599184] ieee80211 phy0: brcmf_run_escan: error (-110)
[  159.599204] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  163.119257] ieee80211 phy0: brcmf_run_escan: error (-110)
[  163.119276] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  166.639386] ieee80211 phy0: brcmf_run_escan: error (-110)
[  166.639406] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  170.159415] ieee80211 phy0: brcmf_run_escan: error (-110)
[  170.159453] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  173.679530] ieee80211 phy0: brcmf_run_escan: error (-110)
[  173.679566] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  177.199592] ieee80211 phy0: brcmf_run_escan: error (-110)
[  177.199614] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  180.719643] ieee80211 phy0: brcmf_run_escan: error (-110)
[  180.719661] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  184.239698] ieee80211 phy0: brcmf_run_escan: error (-110)
[  184.239718] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  187.759757] ieee80211 phy0: brcmf_run_escan: error (-110)
[  187.759776] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  191.279843] ieee80211 phy0: brcmf_run_escan: error (-110)
[  191.279862] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  194.799918] ieee80211 phy0: brcmf_run_escan: error (-110)
[  194.799938] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  198.319934] ieee80211 phy0: brcmf_run_escan: error (-110)
[  198.319954] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  201.839998] ieee80211 phy0: brcmf_run_escan: error (-110)
[  201.840017] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  205.360039] ieee80211 phy0: brcmf_run_escan: error (-110)
[  205.360058] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  208.880078] ieee80211 phy0: brcmf_run_escan: error (-110)
[  208.880099] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  212.400104] ieee80211 phy0: brcmf_run_escan: error (-110)
[  212.400123] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  215.920215] ieee80211 phy0: brcmf_run_escan: error (-110)
[  215.920236] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  219.440188] ieee80211 phy0: brcmf_run_escan: error (-110)
[  219.440209] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  222.960181] ieee80211 phy0: brcmf_run_escan: error (-110)
[  222.960201] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  226.480274] ieee80211 phy0: brcmf_run_escan: error (-110)
[  226.480295] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  230.000278] ieee80211 phy0: brcmf_run_escan: error (-110)
[  230.000297] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  233.520310] ieee80211 phy0: brcmf_run_escan: error (-110)
[  233.520329] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  237.040344] ieee80211 phy0: brcmf_run_escan: error (-110)
[  237.040364] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  240.560380] ieee80211 phy0: brcmf_run_escan: error (-110)
[  240.560399] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  244.080359] ieee80211 phy0: brcmf_run_escan: error (-110)
[  244.080379] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  247.600414] ieee80211 phy0: brcmf_run_escan: error (-110)
[  247.600433] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  251.120450] ieee80211 phy0: brcmf_run_escan: error (-110)
[  251.120471] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  254.640469] ieee80211 phy0: brcmf_run_escan: error (-110)
[  254.640488] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  258.160498] ieee80211 phy0: brcmf_run_escan: error (-110)
[  258.160517] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  261.680596] ieee80211 phy0: brcmf_run_escan: error (-110)
[  261.680617] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  265.200579] ieee80211 phy0: brcmf_run_escan: error (-110)
[  265.200599] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  268.720454] ieee80211 phy0: brcmf_run_escan: error (-110)
[  268.720473] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  272.240233] ieee80211 phy0: brcmf_run_escan: error (-110)
[  272.240254] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  275.760092] ieee80211 phy0: brcmf_run_escan: error (-110)
[  275.760114] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  279.279945] ieee80211 phy0: brcmf_run_escan: error (-110)
[  279.279966] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  282.799797] ieee80211 phy0: brcmf_run_escan: error (-110)
[  282.799818] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  286.319758] ieee80211 phy0: brcmf_run_escan: error (-110)
[  286.319777] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  289.839589] ieee80211 phy0: brcmf_run_escan: error (-110)
[  289.839611] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
[  293.359491] ieee80211 phy0: brcmf_run_escan: error (-110)
[  293.359511] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)