Skip to content

Instantly share code, notes, and snippets.

@petemcw
Last active February 2, 2024 11:50
Show Gist options
  • Star 79 You must be signed in to star a gist
  • Fork 28 You must be signed in to fork a gist
  • Save petemcw/9265670 to your computer and use it in GitHub Desktop.
Save petemcw/9265670 to your computer and use it in GitHub Desktop.
Mac OS X LEMP Configuration

Mac OS X LEMP Configuration

This Gist is a collection of configuration files that can be used to easily setup a Homebrew-based LEMP stack on Mac OS X.

Files in this repository are numbered and named for ordering purposes only. At the top of each file is a section of metadata that denote what component the file belongs to and the default name & location of the file. Feel free to implement it however you want.

Note: some configuration files have hard-coded paths to my user directory -- fix it for your setup

Setup

Before any of this will work you'll need to have both Xcode Command Line tools and Homebrew installed. Here are a few shortcuts to get you started:

xcode-select --install
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"

Nginx

Files numbered 02 through 12 are Nginx configuration files. If you haven't already, install via Homebrew:

brew install nginx

Running on Port 80

To run Nginx on as your primary web server on port 80, the configuration files need to be owned and run as the user root.

sudo brew services start nginx

PHP

Files numbered 13 through 15 are PHP-FPM configuration files. If you haven't already, install via Homebrew:

brew install php
brew install php@7.2
brew install php@7.1

If you need deprecated versions:

brew tap exolnet/homebrew-deprecated
brew install php@7.0
brew install php@5.6

Change PHP Versions

As a developer you may find that you need to change between versions of PHP. Homebrew makes this process easy! The basic steps are to alter the $PATH variable for the current version of PHP. I find it easiest to use a script for switching PHP versions.

MySQL

Files numbered 16 through 18 are MySQL configuration files. I personally use Percona Server as my flavor of MySQL. If you haven't already, install via Homebrew:

brew install percona-server

Before you start the MySQL service, create the configuration directory and place the configuration files:

mkdir -p ~/.my.cnf.d/

Note: if you have trouble getting MySQL to start, you probably need to remove the default ib_logfile and ibdata files in /usr/local/var/mysql.

dnsmasq

Files numbered 19 through 20 are dnsmasq configuration files. If you haven't already, install via Homebrew:

brew install dnsmasq

DNS takes slightly more setup than the others. You'll need to create the configuration files and update with the edited one from this repo:

sudo mkdir -p /etc/resolver/
sudo touch /etc/resolver/test
touch /usr/local/etc/dnsmasq.conf

Then you'll want to flush your local DNS cache to ensure dnsmasq takes over:

sudo killall -9 mDNSResponder && sudo killall -9 dnsmasq
dscacheutil -flushcache
# NGINX
# FILE: /usr/local/etc/nginx/nginx.conf
#------------------------------------------------------------------------------#
# http://nginx.org/en/docs/ngx_core_module.html
#------------------------------------------------------------------------------#
user prm staff;
worker_processes auto;
#------------------------------------------------------------------------------#
# http://nginx.org/en/docs/ngx_core_module.html#events
#------------------------------------------------------------------------------#
events {
worker_connections 1024;
accept_mutex off;
}
#------------------------------------------------------------------------------#
# http://nginx.org/en/docs/http/ngx_http_core_module.html
#------------------------------------------------------------------------------#
http {
include mime.types;
charset utf-8;
default_type application/octet-stream;
log_format main '$remote_addr - $remote_user [$time_local] "$request" '
'$status $body_bytes_sent "$http_referer" '
'"$http_user_agent" "$http_x_forwarded_for"';
access_log /usr/local/var/log/nginx/access.log main;
error_log /usr/local/var/log/nginx/error.log warn;
# compression
gzip on;
gzip_comp_level 5;
gzip_min_length 256;
gzip_proxied any;
gzip_vary on;
gzip_types
application/atom+xml
application/javascript
application/json
application/ld+json
application/manifest+json
application/rss+xml
application/vnd.geo+json
application/vnd.ms-fontobject
application/x-font-ttf
application/x-web-app-manifest+json
application/xhtml+xml
application/xml
font/opentype
image/bmp
image/svg+xml
image/x-icon
text/cache-manifest
text/css
text/plain
text/vcard
text/vnd.rim.location.xloc
text/vtt
text/x-component
text/x-cross-domain-policy
text/xml;
# http://tautt.com/best-nginx-configuration-for-security/
directio off;
disable_symlinks off;
ignore_invalid_headers on;
merge_slashes on;
recursive_error_pages on;
server_name_in_redirect off;
server_tokens off;
underscores_in_headers on;
# https://t37.net/nginx-optimization-understanding-sendfile-tcp_nodelay-and-tcp_nopush.html
sendfile on;
tcp_nodelay on;
tcp_nopush on;
# timeouts
keepalive_timeout 25;
send_timeout 120;
proxy_connect_timeout 120;
proxy_send_timeout 120;
proxy_read_timeout 120;
# sizes
client_body_buffer_size 128k;
client_max_body_size 2M;
server_names_hash_bucket_size 128;
types_hash_max_size 2048;
# nosniff header (https://www.owasp.org/index.php/List_of_useful_HTTP_headers)
add_header X-Content-Type-Options nosniff;
add_header X-Frame-Options SAMEORIGIN;
add_header X-XSS-Protection "1; mode=block";
# enable session resumption to improve https performance
# http://vincent.bernat.im/en/blog/2011-ssl-session-reuse-rfc5077.html
ssl_session_cache shared:SSL:50m;
ssl_session_timeout 5m;
# Diffie-Hellman parameter for DHE ciphersuites
ssl_dhparam /usr/local/etc/nginx/ssl/dh.pem;
# disable SSLv3(enabled by default since nginx 0.8.19) since it's less secure then TLS
# http://en.wikipedia.org/wiki/Secure_Sockets_Layer#SSL_3.0
ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
# enables server-side protection from BEAST attacks
# http://blog.ivanristic.com/2013/09/is-beast-still-a-threat.html
ssl_prefer_server_ciphers on;
# ciphers chosen for forward secrecy and compatibility
# http://blog.ivanristic.com/2013/08/configuring-apache-nginx-and-openssl-for-forward-secrecy.html
ssl_ciphers 'ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS';
# config to enable HSTS(HTTP Strict Transport Security)
# https://developer.mozilla.org/en-US/docs/Security/HTTP_Strict_Transport_Security
# to avoid SSL stripping https://en.wikipedia.org/wiki/SSL_stripping#SSL_stripping
add_header Strict-Transport-Security "max-age=31536000; includeSubdomains;";
# detect https
map $scheme $fastcgi_https {
default $https;
http "";
https on;
}
# PHP-FPM
upstream phpfpm {
server unix:/usr/local/var/run/php-fpm.sock;
}
upstream fastcgi_backend {
server unix:/usr/local/var/run/php-fpm.sock;
}
# include active sites
include /usr/local/etc/nginx/sites-enabled/*;
}
# NGINX
# FILE: /usr/local/etc/nginx/fastcgi_params
fastcgi_param QUERY_STRING $query_string;
fastcgi_param REQUEST_METHOD $request_method;
fastcgi_param CONTENT_TYPE $content_type;
fastcgi_param CONTENT_LENGTH $content_length;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
fastcgi_param REQUEST_URI $request_uri;
fastcgi_param DOCUMENT_URI $document_uri;
fastcgi_param DOCUMENT_ROOT $document_root;
fastcgi_param SERVER_PROTOCOL $server_protocol;
fastcgi_param REQUEST_SCHEME $scheme;
fastcgi_param HTTPS $https if_not_empty;
fastcgi_param GATEWAY_INTERFACE CGI/1.1;
fastcgi_param SERVER_SOFTWARE nginx/$nginx_version;
fastcgi_param REMOTE_ADDR $remote_addr;
fastcgi_param REMOTE_PORT $remote_port;
fastcgi_param SERVER_ADDR $server_addr;
fastcgi_param SERVER_PORT $server_port;
fastcgi_param SERVER_NAME $server_name;
# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param REDIRECT_STATUS 200;
# NGINX
# FILE: /usr/local/etc/nginx/conf.d/assets.conf
# Do not log attempts for common files
location ~ ^/(favicon.ico|robots.txt) {
access_log off;
log_not_found off;
}
# NGINX
# FILE: /usr/local/etc/nginx/conf.d/security.conf
# Disable all methods besides HEAD, GET, and POST
if ($request_method !~ ^(GET|HEAD|POST)$) {
return 444;
}
# Block access to "hidden" files and directories whose names begin with a
# period. This includes directories used by version control systems such
# as Subversion or Git to store control files.
location ~ (^|/)\. {
access_log off;
log_not_found off;
return 404;
}
# Deny obviously bad requests
location ~ \.(aspx|asp|jsp|cgi)$ {
return 410;
}
# NGINX
# FILE: /usr/local/etc/nginx/conf.d/fastcgi.conf
# Tell upstream who is making the request
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_redirect off;
# Allow to complete long running requests
proxy_read_timeout 600s;
# Do not cache dynamic content
expires off;
# PHP Settings
include /usr/local/etc/nginx/fastcgi_params;
fastcgi_connect_timeout 15s;
fastcgi_send_timeout 120s;
fastcgi_read_timeout 120s;
fastcgi_buffer_size 128k;
fastcgi_buffers 16 16k;
fastcgi_busy_buffers_size 256k;
fastcgi_temp_file_write_size 256k;
fastcgi_max_temp_file_size 0;
fastcgi_intercept_errors on;
fastcgi_ignore_client_abort on;
fastcgi_split_path_info ^(.+?\.php)(/.+)$;
fastcgi_index index.php;
fastcgi_pass_header *;
# NGINX
# FILE: /usr/local/etc/nginx/conf.d/drupal.conf
# Deny access to files the public does not need
location ~* ^.+(\.(txt|log|engine|inc|info|install|make|module|profile|test|po|sh|sql|theme|tpl(\.php)?|xtmpl))$ {
internal;
}
# Deny access to other PHP files
location ~ \..*/.*\.php {
internal;
}
# location for image cache
location ~* files/styles {
access_log off;
log_not_found off;
try_files $uri @rewrite;
error_page 404 @drupal;
}
# Deny access to private and backups
location ~* ^/sites/.*/(private|files/backup_migrate)/ {
access_log off;
return 404;
}
# Directives to send expires headers and turn off 404 error logging for Static assets
location ~* ^.+\.(ogg|ogv|svg|svgz|eot|otf|woff|mp4|ttf|rss|atom|jpe?g|gif|png|ico|zip|pdf|t?gz|gz|rar|bz2|doc|xls|exe|ppt|tar|mid|midi|wav|swf|bmp|txt|rtf|md)$ {
access_log off;
log_not_found off;
expires max;
# CORS headers; this is wide-open, you want to tight it up a bit
add_header Cache-Control public;
add_header Access-Control-Allow-Origin *;
add_header Access-Control-Allow-Methods GET,OPTIONS;
add_header Access-Control-Allow-Headers *;
}
# Attempt to serve the request by trying direct file, directory, Drupal Controller
location / {
try_files $uri $uri/ /index.php?q=$uri&$args;
}
# Check: http://wiki.nginx.org/Pitfalls
location ~* (install|update|apc|info)\.php$ {
# Uncomment to protect these files
#auth_basic "Restricted";
#auth_basic_user_file .htpasswd;
# filter out problem conditions
location ~ \..*/.*\.php$ { return 404; }
# bring in parameters
include conf.d/fastcgi.conf;
# send to upstream
fastcgi_pass phpfpm;
}
# image cache handler
location @rewrite {
rewrite ^/(.*)$ /index.php?q=$1;
}
# Pass PHP scripts to PHP-FPM daemon
# Check: http://wiki.nginx.org/Pitfalls
location ~* \.php$ {
# filter out problem conditions
try_files $uri $uri/ =404;
# bring in parameters
include conf.d/fastcgi.conf;
# send requests to upstream
fastcgi_pass phpfpm;
}
# NGINX
# FILE: /usr/local/etc/nginx/conf.d/drupal8.conf
# Deny access to private and backups
location ~* ^/sites/.*/(private|files/backup_migrate)/ {
access_log off;
return 404;
}
# Deny access to PHP files in the vendor directory
location ~ /vendor/.*\.php$ {
access_log off;
return 404;
}
# Deny access to other PHP files
location ~ \..*/.*\.php$ {
internal;
}
# Allow "Well-Known URIs" as per RFC 5785
location ~* ^/.well-known/ {
allow all;
}
# main entry point
location / {
try_files $uri /index.php?$query_string;
}
# In Drupal 8, we must also match new paths where the '.php' appears in
# the middle, such as update.php/selection. The rule we use is strict,
# and only allows this pattern with the update.php front controller.
#
# This allows legacy path aliases in the form of
# blog/index.php/legacy-path to continue to route to Drupal nodes. If
# you do not have any paths like that, then you might prefer to use a
# laxer rule, such as:
# location ~ \.php(/|$) {
# The laxer rule will continue to work if Drupal uses this new URL
# pattern with front controllers other than update.php in a future
# release.
location ~ '\.php$|^/update.php' {
include conf.d/fastcgi.conf;
fastcgi_pass phpfpm;
}
# Fighting with Styles? This little gem is amazing.
location ~ ^/sites/.*/files/styles/ {
try_files $uri @rewrite;
}
# image cache handler
location @rewrite {
rewrite ^/(.*)$ /index.php?q=$1;
}
# Handle private files through Drupal. Private file's path can come
# with a language prefix.
location ~ ^(/[a-z\-]+)?/system/files/ {
try_files $uri /index.php?$query_string;
}
location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ {
expires max;
log_not_found off;
}
# NGINX
# FILE: /usr/local/etc/nginx/conf.d/magento.conf
# Forward Fooman Speedster requests to minify controller
location /minify/ {
rewrite ^/minify/([0-9]+)(/.*\.(js|css))$ /lib/minify/m.php?f=$2&d=$1 last;
}
# Show correct errors caused when a store owner enables built-in minification
location /skin/m/ {
rewrite ^/skin/m/([0-9]+)(/.*.(js|css))$ /lib/minify/m.php?f=$2&d=$1 last;
}
# Directives to send expires headers and turn off 404 error logging for Static assets
location ~* ^.+\.(ogg|ogv|svg|svgz|eot|otf|woff|mp4|ttf|rss|atom|jpe?g|gif|png|ico|zip|pdf|t?gz|gz|rar|bz2|doc|xls|exe|ppt|tar|mid|midi|wav|swf|bmp|txt|rtf|md)$ {
access_log off;
log_not_found off;
expires max;
# CORS headers; this is wide-open, you want to tight it up a bit
add_header Cache-Control public;
add_header Access-Control-Allow-Origin *;
add_header Access-Control-Allow-Methods GET,OPTIONS;
add_header Access-Control-Allow-Headers *;
}
# Deny access to files the public doesn't need
location ^~ /(app|config|includes|lib|media/customer|media/downloadable|pkginfo|report/config.xml|shell|var)/ {
internal;
}
# Attempt to serve the request by trying direct file, directory, Magento front controller
location / {
try_files $uri $uri/ /index.php?$args;
}
# The downloader has its own index.php that needs to be used
location ~* ^(/downloader)(.*) {
try_files $uri $uri/ /downloader/index.php$1;
}
# REST API endpoint
location /api {
rewrite ^/api/rest /api.php?type=rest last;
rewrite ^/api/v2_soap /api.php?type=v2_soap last;
rewrite ^/api/soap /api.php?type=soap last;
}
# Pass PHP scripts to PHP-FPM daemon
# Check: http://wiki.nginx.org/Pitfalls
location ~* \.php$ {
# filter out problem conditions
try_files $uri $uri/ =404;
# bring in parameters
include conf.d/fastcgi.conf;
fastcgi_param MAGE_IS_DEVELOPER_MODE true;
fastcgi_param MAGE_RUN_CODE default;
fastcgi_param MAGE_RUN_TYPE store;
# send requests to Upstream, but blacklist media location from fastcgi
if ($uri !~ "^/(media)/") {
fastcgi_pass phpfpm;
}
}
# NGINX
# FILE: /usr/local/etc/nginx/conf.d/magento2.conf
root $MAGE_ROOT/pub;
index index.php;
autoindex off;
charset UTF-8;
error_page 404 403 = /errors/404.php;
#add_header "X-UA-Compatible" "IE=Edge";
# Deny access to sensitive files
location /.user.ini {
deny all;
}
# PHP entry point for setup application
location ~* ^/setup($|/) {
root $MAGE_ROOT;
location ~ ^/setup/index.php {
fastcgi_pass fastcgi_backend;
fastcgi_param PHP_FLAG "session.auto_start=off \n suhosin.session.cryptua=off";
fastcgi_param PHP_VALUE "memory_limit=756M \n max_execution_time=600";
fastcgi_read_timeout 600s;
fastcgi_connect_timeout 600s;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}
location ~ ^/setup/(?!pub/). {
deny all;
}
location ~ ^/setup/pub/ {
add_header X-Frame-Options "SAMEORIGIN";
}
}
# PHP entry point for update application
location ~* ^/update($|/) {
root $MAGE_ROOT;
location ~ ^/update/index.php {
fastcgi_split_path_info ^(/update/index.php)(/.+)$;
fastcgi_pass fastcgi_backend;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param PATH_INFO $fastcgi_path_info;
include fastcgi_params;
}
# Deny everything but index.php
location ~ ^/update/(?!pub/). {
deny all;
}
location ~ ^/update/pub/ {
add_header X-Frame-Options "SAMEORIGIN";
}
}
location / {
try_files $uri $uri/ /index.php$is_args$args;
}
location /pub/ {
location ~ ^/pub/media/(downloadable|customer|import|theme_customization/.*\.xml) {
deny all;
}
alias $MAGE_ROOT/pub/;
add_header X-Frame-Options "SAMEORIGIN";
}
location /static/ {
# Uncomment the following line in production mode
# expires max;
# Remove signature of the static files that is used to overcome the browser cache
location ~ ^/static/version {
rewrite ^/static/(version[^/]+/)?(.*)$ /static/$2 last;
}
location ~* \.(ico|jpg|jpeg|png|gif|svg|js|css|swf|eot|ttf|otf|woff|woff2|json)$ {
add_header Cache-Control "public";
add_header X-Frame-Options "SAMEORIGIN";
expires +1y;
if (!-f $request_filename) {
rewrite ^/static/?(.*)$ /static.php?resource=$1 last;
}
}
location ~* \.(zip|gz|gzip|bz2|csv|xml)$ {
add_header Cache-Control "no-store";
add_header X-Frame-Options "SAMEORIGIN";
expires off;
if (!-f $request_filename) {
rewrite ^/static/?(.*)$ /static.php?resource=$1 last;
}
}
if (!-f $request_filename) {
rewrite ^/static/?(.*)$ /static.php?resource=$1 last;
}
add_header X-Frame-Options "SAMEORIGIN";
}
location /media/ {
try_files $uri $uri/ /get.php$is_args$args;
location ~ ^/media/theme_customization/.*\.xml {
deny all;
}
location ~* \.(ico|jpg|jpeg|png|gif|svg|js|css|swf|eot|ttf|otf|woff|woff2)$ {
add_header Cache-Control "public";
add_header X-Frame-Options "SAMEORIGIN";
expires +1y;
try_files $uri $uri/ /get.php$is_args$args;
}
location ~* \.(zip|gz|gzip|bz2|csv|xml)$ {
add_header Cache-Control "no-store";
add_header X-Frame-Options "SAMEORIGIN";
expires off;
try_files $uri $uri/ /get.php$is_args$args;
}
add_header X-Frame-Options "SAMEORIGIN";
}
location /media/customer/ {
deny all;
}
location /media/downloadable/ {
deny all;
}
location /media/import/ {
deny all;
}
# PHP entry point for main application
location ~ ^/(index|get|static|errors/report|errors/404|errors/503|health_check)\.php$ {
try_files $uri =404;
fastcgi_pass fastcgi_backend;
fastcgi_buffers 1024 4k;
fastcgi_param PHP_FLAG "session.auto_start=off \n suhosin.session.cryptua=off";
fastcgi_param PHP_VALUE "memory_limit=756M \n max_execution_time=18000";
fastcgi_read_timeout 600s;
fastcgi_connect_timeout 600s;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}
gzip on;
gzip_disable "msie6";
gzip_comp_level 6;
gzip_min_length 1100;
gzip_buffers 16 8k;
gzip_proxied any;
gzip_types
text/plain
text/css
text/js
text/xml
text/javascript
application/javascript
application/x-javascript
application/json
application/xml
application/xml+rss
image/svg+xml;
gzip_vary on;
# Banned locations (only reached if the earlier PHP entry point regexes don't match)
location ~* (\.php$|\.htaccess$|\.git) {
deny all;
}
# NGINX
# FILE: /usr/local/etc/nginx/conf.d/wordpress.conf
# Deny access to any files with a .php extension in the uploads directory
# Works in sub-directory installs and also in multisite network
# Keep logging the requests to parse later (or to pass to firewall utilities such as fail2ban)
location ~* /(?:uploads|files)/.*\.php$ {
deny all;
}
# Directives to send expires headers and turn off 404 error logging for Static assets
location ~* ^.+\.(ogg|ogv|svg|svgz|eot|otf|woff|mp4|ttf|rss|atom|jpe?g|gif|png|ico|zip|pdf|t?gz|gz|rar|bz2|doc|xls|exe|ppt|tar|mid|midi|wav|swf|bmp|txt|rtf|md)$ {
access_log off;
log_not_found off;
expires max;
# CORS headers; this is wide-open, you want to tight it up a bit
add_header Cache-Control public;
add_header Access-Control-Allow-Origin *;
add_header Access-Control-Allow-Methods GET,OPTIONS;
add_header Access-Control-Allow-Headers *;
}
# Attempted to match last if rules below fail.
location / {
try_files $uri $uri/ /index.php?$args;
}
# Add trailing slash to */wp-admin requests.
rewrite /wp-admin$ $scheme://$host$uri/ permanent;
# Pass PHP scripts to PHP-FPM daemon
# Check: http://wiki.nginx.org/Pitfalls
location ~* \.php$ {
# filter out problem conditions
try_files $uri $uri/ =404;
# bring in parameters
include conf.d/fastcgi.conf;
# send requests to upstream
fastcgi_pass phpfpm;
}
# NGINX
# FILE: /usr/local/etc/nginx/sites-enabled/default.conf
server {
# Server settings
listen 443 ssl http2;
listen [::]:443 ssl http2;
server_name localhost;
# security
ssl_certificate /usr/local/etc/nginx/ssl/localhost.pem;
ssl_certificate_key /usr/local/etc/nginx/ssl/localhost.key;
# Project location
root /Users/prm/Projects/;
index index.html index.htm index.php;
# Logging
access_log off;
error_log /usr/local/var/log/nginx/error.log warn;
# Routes
include /usr/local/etc/nginx/conf.d/security.conf;
include /usr/local/etc/nginx/conf.d/assets.conf;
# Uncomment the desired platform
#include /usr/local/etc/nginx/conf.d/magento.conf;
#include /usr/local/etc/nginx/conf.d/drupal.conf;
#include /usr/local/etc/nginx/conf.d/drupal8.conf;
#include /usr/local/etc/nginx/conf.d/wordpress.conf;
# Magento 2
# set $MAGE_RUN_TYPE 'website';
# set $MAGE_RUN_CODE 'base';
# set $MAGE_ROOT /Users/prm/Projects/src/;
# include /Users/prm/Projects/src/nginx.conf.sample;
}
; PHP
; FILE: /usr/local/etc/php/7.3/php-fpm.conf
;;;;;;;;;;;;;;;;;;;;;
; FPM Configuration ;
;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;
; Global Options ;
;;;;;;;;;;;;;;;;;;
[global]
; Pid file
; Default Value: none
pid = /usr/local/var/run/php-fpm.pid
; Error log file
; Default Value: log/php-fpm.log
error_log = /usr/local/var/log/php-fpm.log
; Log level
; Possible Values: alert, error, warning, notice, debug
; Default Value: notice
log_level = notice
; If this number of child processes exit with SIGSEGV or SIGBUS within the time
; interval set by emergency_restart_interval then FPM will restart. A value
; of '0' means 'Off'.
; Default Value: 0
emergency_restart_threshold = 10
; Interval of time used by emergency_restart_interval to determine when
; a graceful restart will be initiated. This can be useful to work around
; accidental corruptions in an accelerator's shared memory.
; Available Units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
emergency_restart_interval = 1m
; Time limit for child processes to wait for a reaction on signals from master.
; Available units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
process_control_timeout = 10s
;;;;;;;;;;;;;;;;;;;;
; Pool Definitions ;
;;;;;;;;;;;;;;;;;;;;
include=/usr/local/etc/php/7.3/pool.d/*.conf
; PHP
; FILE: /usr/local/etc/php/7.3/pool.d/www.conf
;;;;;;;;;;;;;;;;;;;;
; Pool Definitions ;
;;;;;;;;;;;;;;;;;;;;
[www]
; Unix user/group of processes
;user =
;group =
; The address on which to accept FastCGI requests.
listen = /usr/local/var/run/php-fpm.sock
; Set permissions for unix socket, if one is used.
listen.mode = 0666
; List of ipv4 addresses of FastCGI clients which are allowed to connect.
listen.allowed_clients = 127.0.0.1
; Choose how the process manager will control the number of child processes.
pm = ondemand
; The number of child processes to be created when pm is set to 'static' and the
; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
; This value sets the limit on the number of simultaneous requests that will be
; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
; CGI. The below defaults are based on a server without much resources. Don't
; forget to tweak pm.* to fit your needs.
pm.max_children = 50
; The number of child processes created on startup.
; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
pm.start_servers = 5
; The desired minimum number of idle server processes.
pm.min_spare_servers = 1
; The desired maximum number of idle server processes.
pm.max_spare_servers = 25
; The number of requests each child process should execute before respawning.
; This can be useful to work around memory leaks in 3rd party libraries. For
; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
; Default Value: 0
pm.max_requests = 500
; The URI to view the FPM status page.
; Default Value: not set
pm.status_path = /status
; The ping URI to call the monitoring page of FPM.
; Default Value: not set
ping.path = /ping
; This directive may be used to customize the response of a ping request. The
; response is formatted as text/plain with a 200 response code.
; Default Value: pong
ping.response = pong
; The log file for slow requests
; Default Value: not set
slowlog = /usr/local/var/log/$pool.log.slow
; The timeout for serving a single request after which a PHP backtrace will be
; dumped to the 'slowlog' file. A value of '0s' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
request_slowlog_timeout = 2s
; The timeout for serving a single request after which the worker process will
; be killed. This option should be used when the 'max_execution_time' ini option
; does not stop script execution for some reason. A value of '0' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
request_terminate_timeout = 0
; Set open file descriptor rlimit.
; Default Value: system defined value
rlimit_files = 131072
; Set max core size rlimit.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
rlimit_core = unlimited
; Chdir to this directory at the start.
; Note: relative path can be used.
; Default Value: current directory or / when chroot
;chdir =
; Redirect worker stdout and stderr into main error log. If not set, stdout and
; stderr will be redirected to /dev/null according to FastCGI specs.
; Note: on highloaded environement, this can cause some delay in the page
; process time (several ms).
; Default Value: no
catch_workers_output = yes
; Additional php.ini defines, specific to this pool of workers. These settings
; overwrite the values previously defined in the php.ini.
;
; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
php_flag[display_errors] = on
php_admin_flag[log_errors] = on
; Only process files with following extensions
security.limit_extensions = .php .phtml
; PHP
; FILE: /usr/local/etc/php/7.3/conf.d/zzz.ini
; Custom php.ini overrides
date.timezone = Etc/UTC
memory_limit = 512M
output_buffering = 4096
display_errors = On
log_errors = On
expose_php = On
error_reporting = E_ALL
realpath_cache_ttl = 120
realpath_cache_size = 512k
error_log = /usr/local/var/log/php-errors.log
cgi.fix_pathinfo = 0
max_execution_time = 120
opcache.enable=1
opcache.enable_cli=1
opcache.memory_consumption=64
opcache.interned_strings_buffer=8
opcache.max_accelerated_files=4000
opcache.max_wasted_percentage=5
opcache.use_cwd=1
opcache.validate_timestamps=1
opcache.fast_shutdown=1
# MYSQL
# FILE: ~/.my.cnf
# For advice on how to change settings please see
# http://dev.mysql.com/doc/refman/5.6/en/server-configuration-defaults.html
#------------------------------------------------------------------------------#
[mysqld]
sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES
#
# Include all files from the config directory
#
!includedir /Users/prm/.my.cnf.d
# MYSQL
# FILE: ~/.my.cnf.d/client.cnf
# This group is read by the client library. Use it for options that affect all
# clients, but not the server
#------------------------------------------------------------------------------#
[client]
# MYSQL
# FILE: ~/.my.cnf.d/server.cnf
# This group is read by the server. Use it for options that only affect the
# server.
#------------------------------------------------------------------------------#
[server]
[mysqld]
# Logging
general_log = 1
general_log_file = /usr/local/var/log/mysql/mysql-errors.log
# Query cache
query_cache_type = 1
query_cache_limit = 2M
query_cache_size = 64M
# InnoDB
innodb_data_file_path = ibdata1:512M;ibdata2:256M:autoextend
innodb_autoextend_increment = 128
innodb_log_file_size = 256M
innodb_buffer_pool_size = 2G
# DNS
# FILE: /usr/local/etc/dnsmasq.conf
# Configuration file for dnsmasq.
#
# Format is one option per line, legal options are the same
# as the long options legal on the command line. See
# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.
# Listen on this specific port instead of the standard DNS port
# (53). Setting this to zero completely disables DNS function,
# leaving only DHCP and/or TFTP.
#port=5353
# The following two options make you a better netizen, since they
# tell dnsmasq to filter out queries which the public DNS cannot
# answer, and which load the servers (especially the root servers)
# unnecessarily. If you have a dial-on-demand link they also stop
# these requests from bringing up the link unnecessarily.
# Never forward plain names (without a dot or domain part)
#domain-needed
# Never forward addresses in the non-routed address spaces.
#bogus-priv
# Uncomment these to enable DNSSEC validation and caching:
# (Requires dnsmasq to be built with DNSSEC option.)
#conf-file=%%PREFIX%%/share/dnsmasq/trust-anchors.conf
#dnssec
# Replies which are not DNSSEC signed may be legitimate, because the domain
# is unsigned, or may be forgeries. Setting this option tells dnsmasq to
# check that an unsigned reply is OK, by finding a secure proof that a DS
# record somewhere between the root and the domain does not exist.
# The cost of setting this is that even queries in unsigned domains will need
# one or more extra DNS queries to verify.
#dnssec-check-unsigned
# Uncomment this to filter useless windows-originated DNS requests
# which can trigger dial-on-demand links needlessly.
# Note that (amongst other things) this blocks all SRV requests,
# so don't use it if you use eg Kerberos, SIP, XMMP or Google-talk.
# This option only affects forwarding, SRV records originating for
# dnsmasq (via srv-host= lines) are not suppressed by it.
#filterwin2k
# Change this line if you want dns to get its upstream servers from
# somewhere other that /etc/resolv.conf
#resolv-file=
# By default, dnsmasq will send queries to any of the upstream
# servers it knows about and tries to favour servers to are known
# to be up. Uncommenting this forces dnsmasq to try each query
# with each server strictly in the order they appear in
# /etc/resolv.conf
#strict-order
# If you don't want dnsmasq to read /etc/resolv.conf or any other
# file, getting its servers from this file instead (see below), then
# uncomment this.
#no-resolv
# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
# files for changes and re-read them then uncomment this.
#no-poll
# Add other name servers here, with domain specs if they are for
# non-public domains.
#server=/localnet/192.168.0.1
# Example of routing PTR queries to nameservers: this will send all
# address->name queries for 192.168.3/24 to nameserver 10.1.2.3
#server=/3.168.192.in-addr.arpa/10.1.2.3
# Add local-only domains here, queries in these domains are answered
# from /etc/hosts or DHCP only.
#local=/localnet/
# Add domains which you want to force to an IP address here.
# The example below send any host in double-click.net to a local
# web-server.
#address=/double-click.net/127.0.0.1
address=/.test/127.0.0.1
# --address (and --server) work with IPv6 addresses too.
#address=/www.thekelleys.org.uk/fe80::20d:60ff:fe36:f83
# Add the IPs of all queries to yahoo.com, google.com, and their
# subdomains to the vpn and search ipsets:
#ipset=/yahoo.com/google.com/vpn,search
# You can control how dnsmasq talks to a server: this forces
# queries to 10.1.2.3 to be routed via eth1
# server=10.1.2.3@eth1
# and this sets the source (ie local) address used to talk to
# 10.1.2.3 to 192.168.1.1 port 55 (there must be a interface with that
# IP on the machine, obviously).
# server=10.1.2.3@192.168.1.1#55
# If you want dnsmasq to change uid and gid to something other
# than the default, edit the following lines.
#user=
#group=
# If you want dnsmasq to listen for DHCP and DNS requests only on
# specified interfaces (and the loopback) give the name of the
# interface (eg eth0) here.
# Repeat the line for more than one interface.
#interface=
# Or you can specify which interface _not_ to listen on
#except-interface=
# Or which to listen on by address (remember to include 127.0.0.1 if
# you use this.)
#listen-address=
# If you want dnsmasq to provide only DNS service on an interface,
# configure it as shown above, and then use the following line to
# disable DHCP and TFTP on it.
#no-dhcp-interface=
# On systems which support it, dnsmasq binds the wildcard address,
# even when it is listening on only some interfaces. It then discards
# requests that it shouldn't reply to. This has the advantage of
# working even when interfaces come and go and change address. If you
# want dnsmasq to really bind only the interfaces it is listening on,
# uncomment this option. About the only time you may need this is when
# running another nameserver on the same machine.
#bind-interfaces
# If you don't want dnsmasq to read /etc/hosts, uncomment the
# following line.
#no-hosts
# or if you want it to read another file, as well as /etc/hosts, use
# this.
#addn-hosts=/etc/banner_add_hosts
# Set this (and domain: see below) if you want to have a domain
# automatically added to simple names in a hosts-file.
#expand-hosts
# Set the domain for dnsmasq. this is optional, but if it is set, it
# does the following things.
# 1) Allows DHCP hosts to have fully qualified domain names, as long
# as the domain part matches this setting.
# 2) Sets the "domain" DHCP option thereby potentially setting the
# domain of all systems configured by DHCP
# 3) Provides the domain part for "expand-hosts"
#domain=thekelleys.org.uk
# Set a different domain for a particular subnet
#domain=wireless.thekelleys.org.uk,192.168.2.0/24
# Same idea, but range rather then subnet
#domain=reserved.thekelleys.org.uk,192.68.3.100,192.168.3.200
# Uncomment this to enable the integrated DHCP server, you need
# to supply the range of addresses available for lease and optionally
# a lease time. If you have more than one network, you will need to
# repeat this for each network on which you want to supply DHCP
# service.
#dhcp-range=192.168.0.50,192.168.0.150,12h
# This is an example of a DHCP range where the netmask is given. This
# is needed for networks we reach the dnsmasq DHCP server via a relay
# agent. If you don't know what a DHCP relay agent is, you probably
# don't need to worry about this.
#dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h
# This is an example of a DHCP range which sets a tag, so that
# some DHCP options may be set only for this network.
#dhcp-range=set:red,192.168.0.50,192.168.0.150
# Use this DHCP range only when the tag "green" is set.
#dhcp-range=tag:green,192.168.0.50,192.168.0.150,12h
# Specify a subnet which can't be used for dynamic address allocation,
# is available for hosts with matching --dhcp-host lines. Note that
# dhcp-host declarations will be ignored unless there is a dhcp-range
# of some type for the subnet in question.
# In this case the netmask is implied (it comes from the network
# configuration on the machine running dnsmasq) it is possible to give
# an explicit netmask instead.
#dhcp-range=192.168.0.0,static
# Enable DHCPv6. Note that the prefix-length does not need to be specified
# and defaults to 64 if missing/
#dhcp-range=1234::2, 1234::500, 64, 12h
# Do Router Advertisements, BUT NOT DHCP for this subnet.
#dhcp-range=1234::, ra-only
# Do Router Advertisements, BUT NOT DHCP for this subnet, also try and
# add names to the DNS for the IPv6 address of SLAAC-configured dual-stack
# hosts. Use the DHCPv4 lease to derive the name, network segment and
# MAC address and assume that the host will also have an
# IPv6 address calculated using the SLAAC alogrithm.
#dhcp-range=1234::, ra-names
# Do Router Advertisements, BUT NOT DHCP for this subnet.
# Set the lifetime to 46 hours. (Note: minimum lifetime is 2 hours.)
#dhcp-range=1234::, ra-only, 48h
# Do DHCP and Router Advertisements for this subnet. Set the A bit in the RA
# so that clients can use SLAAC addresses as well as DHCP ones.
#dhcp-range=1234::2, 1234::500, slaac
# Do Router Advertisements and stateless DHCP for this subnet. Clients will
# not get addresses from DHCP, but they will get other configuration information.
# They will use SLAAC for addresses.
#dhcp-range=1234::, ra-stateless
# Do stateless DHCP, SLAAC, and generate DNS names for SLAAC addresses
# from DHCPv4 leases.
#dhcp-range=1234::, ra-stateless, ra-names
# Do router advertisements for all subnets where we're doing DHCPv6
# Unless overriden by ra-stateless, ra-names, et al, the router
# advertisements will have the M and O bits set, so that the clients
# get addresses and configuration from DHCPv6, and the A bit reset, so the
# clients don't use SLAAC addresses.
#enable-ra
# Supply parameters for specified hosts using DHCP. There are lots
# of valid alternatives, so we will give examples of each. Note that
# IP addresses DO NOT have to be in the range given above, they just
# need to be on the same network. The order of the parameters in these
# do not matter, it's permissible to give name, address and MAC in any
# order.
# Always allocate the host with Ethernet address 11:22:33:44:55:66
# The IP address 192.168.0.60
#dhcp-host=11:22:33:44:55:66,192.168.0.60
# Always set the name of the host with hardware address
# 11:22:33:44:55:66 to be "fred"
#dhcp-host=11:22:33:44:55:66,fred
# Always give the host with Ethernet address 11:22:33:44:55:66
# the name fred and IP address 192.168.0.60 and lease time 45 minutes
#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m
# Give a host with Ethernet address 11:22:33:44:55:66 or
# 12:34:56:78:90:12 the IP address 192.168.0.60. Dnsmasq will assume
# that these two Ethernet interfaces will never be in use at the same
# time, and give the IP address to the second, even if it is already
# in use by the first. Useful for laptops with wired and wireless
# addresses.
#dhcp-host=11:22:33:44:55:66,12:34:56:78:90:12,192.168.0.60
# Give the machine which says its name is "bert" IP address
# 192.168.0.70 and an infinite lease
#dhcp-host=bert,192.168.0.70,infinite
# Always give the host with client identifier 01:02:02:04
# the IP address 192.168.0.60
#dhcp-host=id:01:02:02:04,192.168.0.60
# Always give the Infiniband interface with hardware address
# 80:00:00:48:fe:80:00:00:00:00:00:00:f4:52:14:03:00:28:05:81 the
# ip address 192.168.0.61. The client id is derived from the prefix
# ff:00:00:00:00:00:02:00:00:02:c9:00 and the last 8 pairs of
# hex digits of the hardware address.
#dhcp-host=id:ff:00:00:00:00:00:02:00:00:02:c9:00:f4:52:14:03:00:28:05:81,192.168.0.61
# Always give the host with client identifier "marjorie"
# the IP address 192.168.0.60
#dhcp-host=id:marjorie,192.168.0.60
# Enable the address given for "judge" in /etc/hosts
# to be given to a machine presenting the name "judge" when
# it asks for a DHCP lease.
#dhcp-host=judge
# Never offer DHCP service to a machine whose Ethernet
# address is 11:22:33:44:55:66
#dhcp-host=11:22:33:44:55:66,ignore
# Ignore any client-id presented by the machine with Ethernet
# address 11:22:33:44:55:66. This is useful to prevent a machine
# being treated differently when running under different OS's or
# between PXE boot and OS boot.
#dhcp-host=11:22:33:44:55:66,id:*
# Send extra options which are tagged as "red" to
# the machine with Ethernet address 11:22:33:44:55:66
#dhcp-host=11:22:33:44:55:66,set:red
# Send extra options which are tagged as "red" to
# any machine with Ethernet address starting 11:22:33:
#dhcp-host=11:22:33:*:*:*,set:red
# Give a fixed IPv6 address and name to client with
# DUID 00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2
# Note the MAC addresses CANNOT be used to identify DHCPv6 clients.
# Note also the they [] around the IPv6 address are obilgatory.
#dhcp-host=id:00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2, fred, [1234::5]
# Ignore any clients which are not specified in dhcp-host lines
# or /etc/ethers. Equivalent to ISC "deny unknown-clients".
# This relies on the special "known" tag which is set when
# a host is matched.
#dhcp-ignore=tag:!known
# Send extra options which are tagged as "red" to any machine whose
# DHCP vendorclass string includes the substring "Linux"
#dhcp-vendorclass=set:red,Linux
# Send extra options which are tagged as "red" to any machine one
# of whose DHCP userclass strings includes the substring "accounts"
#dhcp-userclass=set:red,accounts
# Send extra options which are tagged as "red" to any machine whose
# MAC address matches the pattern.
#dhcp-mac=set:red,00:60:8C:*:*:*
# If this line is uncommented, dnsmasq will read /etc/ethers and act
# on the ethernet-address/IP pairs found there just as if they had
# been given as --dhcp-host options. Useful if you keep
# MAC-address/host mappings there for other purposes.
#read-ethers
# Send options to hosts which ask for a DHCP lease.
# See RFC 2132 for details of available options.
# Common options can be given to dnsmasq by name:
# run "dnsmasq --help dhcp" to get a list.
# Note that all the common settings, such as netmask and
# broadcast address, DNS server and default route, are given
# sane defaults by dnsmasq. You very likely will not need
# any dhcp-options. If you use Windows clients and Samba, there
# are some options which are recommended, they are detailed at the
# end of this section.
# Override the default route supplied by dnsmasq, which assumes the
# router is the same machine as the one running dnsmasq.
#dhcp-option=3,1.2.3.4
# Do the same thing, but using the option name
#dhcp-option=option:router,1.2.3.4
# Override the default route supplied by dnsmasq and send no default
# route at all. Note that this only works for the options sent by
# default (1, 3, 6, 12, 28) the same line will send a zero-length option
# for all other option numbers.
#dhcp-option=3
# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
#dhcp-option=option:ntp-server,192.168.0.4,10.10.0.5
# Send DHCPv6 option. Note [] around IPv6 addresses.
#dhcp-option=option6:dns-server,[1234::77],[1234::88]
# Send DHCPv6 option for namservers as the machine running
# dnsmasq and another.
#dhcp-option=option6:dns-server,[::],[1234::88]
# Ask client to poll for option changes every six hours. (RFC4242)
#dhcp-option=option6:information-refresh-time,6h
# Set option 58 client renewal time (T1). Defaults to half of the
# lease time if not specified. (RFC2132)
#dhcp-option=option:T1:1m
# Set option 59 rebinding time (T2). Defaults to 7/8 of the
# lease time if not specified. (RFC2132)
#dhcp-option=option:T2:2m
# Set the NTP time server address to be the same machine as
# is running dnsmasq
#dhcp-option=42,0.0.0.0
# Set the NIS domain name to "welly"
#dhcp-option=40,welly
# Set the default time-to-live to 50
#dhcp-option=23,50
# Set the "all subnets are local" flag
#dhcp-option=27,1
# Send the etherboot magic flag and then etherboot options (a string).
#dhcp-option=128,e4:45:74:68:00:00
#dhcp-option=129,NIC=eepro100
# Specify an option which will only be sent to the "red" network
# (see dhcp-range for the declaration of the "red" network)
# Note that the tag: part must precede the option: part.
#dhcp-option = tag:red, option:ntp-server, 192.168.1.1
# The following DHCP options set up dnsmasq in the same way as is specified
# for the ISC dhcpcd in
# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt
# adapted for a typical dnsmasq installation where the host running
# dnsmasq is also the host running samba.
# you may want to uncomment some or all of them if you use
# Windows clients and Samba.
#dhcp-option=19,0 # option ip-forwarding off
#dhcp-option=44,0.0.0.0 # set netbios-over-TCP/IP nameserver(s) aka WINS server(s)
#dhcp-option=45,0.0.0.0 # netbios datagram distribution server
#dhcp-option=46,8 # netbios node type
# Send an empty WPAD option. This may be REQUIRED to get windows 7 to behave.
#dhcp-option=252,"\n"
# Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client
# probably doesn't support this......
#dhcp-option=option:domain-search,eng.apple.com,marketing.apple.com
# Send RFC-3442 classless static routes (note the netmask encoding)
#dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8
# Send vendor-class specific options encapsulated in DHCP option 43.
# The meaning of the options is defined by the vendor-class so
# options are sent only when the client supplied vendor class
# matches the class given here. (A substring match is OK, so "MSFT"
# matches "MSFT" and "MSFT 5.0"). This example sets the
# mtftp address to 0.0.0.0 for PXEClients.
#dhcp-option=vendor:PXEClient,1,0.0.0.0
# Send microsoft-specific option to tell windows to release the DHCP lease
# when it shuts down. Note the "i" flag, to tell dnsmasq to send the
# value as a four-byte integer - that's what microsoft wants. See
# http://technet2.microsoft.com/WindowsServer/en/library/a70f1bb7-d2d4-49f0-96d6-4b7414ecfaae1033.mspx?mfr=true
#dhcp-option=vendor:MSFT,2,1i
# Send the Encapsulated-vendor-class ID needed by some configurations of
# Etherboot to allow is to recognise the DHCP server.
#dhcp-option=vendor:Etherboot,60,"Etherboot"
# Send options to PXELinux. Note that we need to send the options even
# though they don't appear in the parameter request list, so we need
# to use dhcp-option-force here.
# See http://syslinux.zytor.com/pxe.php#special for details.
# Magic number - needed before anything else is recognised
#dhcp-option-force=208,f1:00:74:7e
# Configuration file name
#dhcp-option-force=209,configs/common
# Path prefix
#dhcp-option-force=210,/tftpboot/pxelinux/files/
# Reboot time. (Note 'i' to send 32-bit value)
#dhcp-option-force=211,30i
# Set the boot filename for netboot/PXE. You will only need
# this is you want to boot machines over the network and you will need
# a TFTP server; either dnsmasq's built in TFTP server or an
# external one. (See below for how to enable the TFTP server.)
#dhcp-boot=pxelinux.0
# The same as above, but use custom tftp-server instead machine running dnsmasq
#dhcp-boot=pxelinux,server.name,192.168.1.100
# Boot for Etherboot gPXE. The idea is to send two different
# filenames, the first loads gPXE, and the second tells gPXE what to
# load. The dhcp-match sets the gpxe tag for requests from gPXE.
#dhcp-match=set:gpxe,175 # gPXE sends a 175 option.
#dhcp-boot=tag:!gpxe,undionly.kpxe
#dhcp-boot=mybootimage
# Encapsulated options for Etherboot gPXE. All the options are
# encapsulated within option 175
#dhcp-option=encap:175, 1, 5b # priority code
#dhcp-option=encap:175, 176, 1b # no-proxydhcp
#dhcp-option=encap:175, 177, string # bus-id
#dhcp-option=encap:175, 189, 1b # BIOS drive code
#dhcp-option=encap:175, 190, user # iSCSI username
#dhcp-option=encap:175, 191, pass # iSCSI password
# Test for the architecture of a netboot client. PXE clients are
# supposed to send their architecture as option 93. (See RFC 4578)
#dhcp-match=peecees, option:client-arch, 0 #x86-32
#dhcp-match=itanics, option:client-arch, 2 #IA64
#dhcp-match=hammers, option:client-arch, 6 #x86-64
#dhcp-match=mactels, option:client-arch, 7 #EFI x86-64
# Do real PXE, rather than just booting a single file, this is an
# alternative to dhcp-boot.
#pxe-prompt="What system shall I netboot?"
# or with timeout before first available action is taken:
#pxe-prompt="Press F8 for menu.", 60
# Available boot services. for PXE.
#pxe-service=x86PC, "Boot from local disk"
# Loads <tftp-root>/pxelinux.0 from dnsmasq TFTP server.
#pxe-service=x86PC, "Install Linux", pxelinux
# Loads <tftp-root>/pxelinux.0 from TFTP server at 1.2.3.4.
# Beware this fails on old PXE ROMS.
#pxe-service=x86PC, "Install Linux", pxelinux, 1.2.3.4
# Use bootserver on network, found my multicast or broadcast.
#pxe-service=x86PC, "Install windows from RIS server", 1
# Use bootserver at a known IP address.
#pxe-service=x86PC, "Install windows from RIS server", 1, 1.2.3.4
# If you have multicast-FTP available,
# information for that can be passed in a similar way using options 1
# to 5. See page 19 of
# http://download.intel.com/design/archives/wfm/downloads/pxespec.pdf
# Enable dnsmasq's built-in TFTP server
#enable-tftp
# Set the root directory for files available via FTP.
#tftp-root=/var/ftpd
# Do not abort if the tftp-root is unavailable
#tftp-no-fail
# Make the TFTP server more secure: with this set, only files owned by
# the user dnsmasq is running as will be send over the net.
#tftp-secure
# This option stops dnsmasq from negotiating a larger blocksize for TFTP
# transfers. It will slow things down, but may rescue some broken TFTP
# clients.
#tftp-no-blocksize
# Set the boot file name only when the "red" tag is set.
#dhcp-boot=tag:red,pxelinux.red-net
# An example of dhcp-boot with an external TFTP server: the name and IP
# address of the server are given after the filename.
# Can fail with old PXE ROMS. Overridden by --pxe-service.
#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3
# If there are multiple external tftp servers having a same name
# (using /etc/hosts) then that name can be specified as the
# tftp_servername (the third option to dhcp-boot) and in that
# case dnsmasq resolves this name and returns the resultant IP
# addresses in round robin fasion. This facility can be used to
# load balance the tftp load among a set of servers.
#dhcp-boot=/var/ftpd/pxelinux.0,boothost,tftp_server_name
# Set the limit on DHCP leases, the default is 150
#dhcp-lease-max=150
# The DHCP server needs somewhere on disk to keep its lease database.
# This defaults to a sane location, but if you want to change it, use
# the line below.
#dhcp-leasefile=/var/lib/misc/dnsmasq.leases
# Set the DHCP server to authoritative mode. In this mode it will barge in
# and take over the lease for any client which broadcasts on the network,
# whether it has a record of the lease or not. This avoids long timeouts
# when a machine wakes up on a new network. DO NOT enable this if there's
# the slightest chance that you might end up accidentally configuring a DHCP
# server for your campus/company accidentally. The ISC server uses
# the same option, and this URL provides more information:
# http://www.isc.org/files/auth.html
#dhcp-authoritative
# Run an executable when a DHCP lease is created or destroyed.
# The arguments sent to the script are "add" or "del",
# then the MAC address, the IP address and finally the hostname
# if there is one.
#dhcp-script=/bin/echo
# Set the cachesize here.
#cache-size=150
# If you want to disable negative caching, uncomment this.
#no-negcache
# Normally responses which come from /etc/hosts and the DHCP lease
# file have Time-To-Live set as zero, which conventionally means
# do not cache further. If you are happy to trade lower load on the
# server for potentially stale date, you can set a time-to-live (in
# seconds) here.
#local-ttl=
# If you want dnsmasq to detect attempts by Verisign to send queries
# to unregistered .com and .net hosts to its sitefinder service and
# have dnsmasq instead return the correct NXDOMAIN response, uncomment
# this line. You can add similar lines to do the same for other
# registries which have implemented wildcard A records.
#bogus-nxdomain=64.94.110.11
# If you want to fix up DNS results from upstream servers, use the
# alias option. This only works for IPv4.
# This alias makes a result of 1.2.3.4 appear as 5.6.7.8
#alias=1.2.3.4,5.6.7.8
# and this maps 1.2.3.x to 5.6.7.x
#alias=1.2.3.0,5.6.7.0,255.255.255.0
# and this maps 192.168.0.10->192.168.0.40 to 10.0.0.10->10.0.0.40
#alias=192.168.0.10-192.168.0.40,10.0.0.0,255.255.255.0
# Change these lines if you want dnsmasq to serve MX records.
# Return an MX record named "maildomain.com" with target
# servermachine.com and preference 50
#mx-host=maildomain.com,servermachine.com,50
# Set the default target for MX records created using the localmx option.
#mx-target=servermachine.com
# Return an MX record pointing to the mx-target for all local
# machines.
#localmx
# Return an MX record pointing to itself for all local machines.
#selfmx
# Change the following lines if you want dnsmasq to serve SRV
# records. These are useful if you want to serve ldap requests for
# Active Directory and other windows-originated DNS requests.
# See RFC 2782.
# You may add multiple srv-host lines.
# The fields are <name>,<target>,<port>,<priority>,<weight>
# If the domain part if missing from the name (so that is just has the
# service and protocol sections) then the domain given by the domain=
# config option is used. (Note that expand-hosts does not need to be
# set for this to work.)
# A SRV record sending LDAP for the example.com domain to
# ldapserver.example.com port 389
#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389
# A SRV record sending LDAP for the example.com domain to
# ldapserver.example.com port 389 (using domain=)
#domain=example.com
#srv-host=_ldap._tcp,ldapserver.example.com,389
# Two SRV records for LDAP, each with different priorities
#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1
#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2
# A SRV record indicating that there is no LDAP server for the domain
# example.com
#srv-host=_ldap._tcp.example.com
# The following line shows how to make dnsmasq serve an arbitrary PTR
# record. This is useful for DNS-SD. (Note that the
# domain-name expansion done for SRV records _does_not
# occur for PTR records.)
#ptr-record=_http._tcp.dns-sd-services,"New Employee Page._http._tcp.dns-sd-services"
# Change the following lines to enable dnsmasq to serve TXT records.
# These are used for things like SPF and zeroconf. (Note that the
# domain-name expansion done for SRV records _does_not
# occur for TXT records.)
#Example SPF.
#txt-record=example.com,"v=spf1 a -all"
#Example zeroconf
#txt-record=_http._tcp.example.com,name=value,paper=A4
# Provide an alias for a "local" DNS name. Note that this _only_ works
# for targets which are names from DHCP or /etc/hosts. Give host
# "bert" another name, bertrand
#cname=bertand,bert
# For debugging purposes, log each DNS query as it passes through
# dnsmasq.
#log-queries
# Log lots of extra information about DHCP transactions.
#log-dhcp
# Include another lot of configuration options.
#conf-file=/etc/dnsmasq.more.conf
#conf-dir=/etc/dnsmasq.d
# Include all the files in a directory except those ending in .bak
#conf-dir=/etc/dnsmasq.d,.bak
# Include all files in a directory which end in .conf
#conf-dir=/etc/dnsmasq.d/,*.conf
# DNS
# FILE: /etc/resolver/test
nameserver 127.0.0.1
domain test
search_order 1
@clonn
Copy link

clonn commented Sep 18, 2016

thanks for your script, that is helpful.

@aredhelrim
Copy link

Thanks for gist but when trying to install php71 i m getting these

brew install php71 --with-fpm --without-apache --with-homebrew-curl --with-homebrew-openssl --without-snmp
==> Installing php71 from homebrew/php
Warning: homebrew/php/php71: this formula has no --with-fpm option so it will be ignored!
Warning: homebrew/php/php71: this formula has no --with-homebrew-openssl option so it will be ignored!
Warning: homebrew/php/php71: this formula has no --without-apache option so it will be ignored!
Warning: homebrew/php/php71: this formula has no --without-snmp option so it will be ignored!

@AlternativeYeah
Copy link

@aredhelrim now the default php-fpm, checking all options
#brew options php71

@jp2kdev
Copy link

jp2kdev commented Nov 26, 2017

Help me please!
I found a message when i test command nginx -t.
kosin$ nginx -t
nginx: [warn] the "user" directive makes sense only if the master process runs with super-user privileges, ignored in /usr/local/etc/nginx/nginx.conf:4
nginx: [emerg] BIO_new_file("/usr/local/etc/nginx/ssl/localhost.pem") failed (SSL: error:02001002:system library:fopen:No such file or directory:fopen('/usr/local/etc/nginx/ssl/localhost.pem','r') error:2006D080:BIO routines:BIO_new_file:no such file)
nginx: configuration file /usr/local/etc/nginx/nginx.conf test failed

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment