Last active
August 29, 2015 13:57
-
-
Save pschmitt/9408454 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /dev/sda: | |
| ATA device, with non-removable media | |
| Model Number: SAMSUNG MZ7TD256HAFV-000L9 | |
| Serial Number: S17LNYADA08216 | |
| Firmware Revision: DXT02L5Q | |
| Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0 | |
| Standards: | |
| Used: unknown (minor revision code 0x0039) | |
| Supported: 9 8 7 6 5 | |
| Likely used: 9 | |
| Configuration: | |
| Logical max current | |
| cylinders 16383 16383 | |
| heads 16 16 | |
| sectors/track 63 63 | |
| -- | |
| CHS current addressable sectors: 16514064 | |
| LBA user addressable sectors: 268435455 | |
| LBA48 user addressable sectors: 500118192 | |
| Logical Sector size: 512 bytes | |
| Physical Sector size: 512 bytes | |
| Logical Sector-0 offset: 0 bytes | |
| device size with M = 1024*1024: 244198 MBytes | |
| device size with M = 1000*1000: 256060 MBytes (256 GB) | |
| cache/buffer size = unknown | |
| Nominal Media Rotation Rate: Solid State Device | |
| Capabilities: | |
| LBA, IORDY(can be disabled) | |
| Queue depth: 32 | |
| Standby timer values: spec'd by Standard, no device specific minimum | |
| R/W multiple sector transfer: Max = 1 Current = 1 | |
| DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 | |
| Cycle time: min=120ns recommended=120ns | |
| PIO: pio0 pio1 pio2 pio3 pio4 | |
| Cycle time: no flow control=120ns IORDY flow control=120ns | |
| Commands/features: | |
| Enabled Supported: | |
| * SMART feature set | |
| Security Mode feature set | |
| * Power Management feature set | |
| * Write cache | |
| * Look-ahead | |
| * Host Protected Area feature set | |
| * WRITE_BUFFER command | |
| * READ_BUFFER command | |
| * DOWNLOAD_MICROCODE | |
| SET_MAX security extension | |
| * 48-bit Address feature set | |
| * Device Configuration Overlay feature set | |
| * Mandatory FLUSH_CACHE | |
| * FLUSH_CACHE_EXT | |
| * SMART error logging | |
| * SMART self-test | |
| * General Purpose Logging feature set | |
| * WRITE_{DMA|MULTIPLE}_FUA_EXT | |
| * 64-bit World wide name | |
| Write-Read-Verify feature set | |
| * WRITE_UNCORRECTABLE_EXT command | |
| * {READ,WRITE}_DMA_EXT_GPL commands | |
| * Segmented DOWNLOAD_MICROCODE | |
| * Gen1 signaling speed (1.5Gb/s) | |
| * Gen2 signaling speed (3.0Gb/s) | |
| * Gen3 signaling speed (6.0Gb/s) | |
| * Native Command Queueing (NCQ) | |
| * Host-initiated interface power management | |
| * Phy event counters | |
| * unknown 76[15] | |
| * DMA Setup Auto-Activate optimization | |
| Device-initiated interface power management | |
| Asynchronous notification (eg. media change) | |
| * Software settings preservation | |
| * unknown 78[8] | |
| * SMART Command Transport (SCT) feature set | |
| * SCT Write Same (AC2) | |
| * SCT Error Recovery Control (AC3) | |
| * SCT Features Control (AC4) | |
| * SCT Data Tables (AC5) | |
| * reserved 69[4] | |
| * reserved 69[7] | |
| * DOWNLOAD MICROCODE DMA command | |
| * SET MAX SETPASSWORD/UNLOCK DMA commands | |
| * WRITE BUFFER DMA command | |
| * READ BUFFER DMA command | |
| * Data Set Management TRIM supported (limit 8 blocks) | |
| * Deterministic read ZEROs after TRIM | |
| Security: | |
| Master password revision code = 65534 | |
| supported | |
| not enabled | |
| not locked | |
| frozen | |
| not expired: security count | |
| supported: enhanced erase | |
| 2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT. | |
| Logical Unit WWN Device Identifier: 5002538500000000 | |
| NAA : 5 | |
| IEEE OUI : 002538 | |
| Unique ID : 500000000 | |
| Checksum: correct |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment