[mrl586@compaq ~]$ dmesg Linux version 2.6.32-ARCH (tobias@T-POWA-LX) (gcc version 4.4.2 (GCC) ) #7 SMP PREEMPT Fri Dec 4 15:39:16 CET 2009 Command line: resume=/dev/disk/by-uuid/e5881b27-4b4e-426b-a29a-ec669916af89 root=/dev/disk/by-uuid/08742c2a-3d40-4283-ba08-09ccbf87000a ro KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000008cb70000 (usable) BIOS-e820: 000000008cb70000 - 000000008cb80000 (ACPI NVS) BIOS-e820: 000000008cb80000 - 000000008fd4f000 (usable) BIOS-e820: 000000008fd4f000 - 000000008fdcf000 (reserved) BIOS-e820: 000000008fdcf000 - 000000008fecf000 (ACPI NVS) BIOS-e820: 000000008fecf000 - 000000008feff000 (ACPI data) BIOS-e820: 000000008feff000 - 000000008ff00000 (usable) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000feb00000 - 00000000feb01000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x8ff00 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFF0000000 write-back 2 base 00FFE00000 mask FFFFE00000 write-protect 3 base 00FFF40000 mask FFFFFF0000 write-protect 4 base 008CB70000 mask FFFFFF0000 uncachable 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000001000 (usable) modified: 0000000000001000 - 0000000000006000 (reserved) modified: 0000000000006000 - 000000000009fc00 (usable) modified: 000000000009fc00 - 00000000000a0000 (reserved) modified: 00000000000ef000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000008cb70000 (usable) modified: 000000008cb70000 - 000000008cb80000 (ACPI NVS) modified: 000000008cb80000 - 000000008fd4f000 (usable) modified: 000000008fd4f000 - 000000008fdcf000 (reserved) modified: 000000008fdcf000 - 000000008fecf000 (ACPI NVS) modified: 000000008fecf000 - 000000008feff000 (ACPI data) modified: 000000008feff000 - 000000008ff00000 (usable) modified: 00000000e0000000 - 00000000f0000000 (reserved) modified: 00000000feb00000 - 00000000feb01000 (reserved) modified: 00000000fec00000 - 00000000fec01000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ffe00000 - 0000000100000000 (reserved) initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000008ff00000 0000000000 - 008fe00000 page 2M 008fe00000 - 008ff00000 page 4k kernel direct mapping tables up to 8ff00000 @ 8000-d000 RAMDISK: 37ef6000 - 37fef133 ACPI: RSDP 00000000000fe030 00014 (v00 HP ) ACPI: RSDT 000000008fefe038 0003C (v01 HPQOEM SLIC-MPC 00000003 01000013) ACPI: FACP 000000008fefd000 00074 (v01 HP 0944 00000003 HP 00000001) ACPI: DSDT 000000008fee5000 14625 (v01 HP 0944 00000001 HP 00000001) ACPI: FACS 000000008fea1000 00040 ACPI: APIC 000000008fefc000 00084 (v01 HP 0944 00000001 HP 00000001) ACPI: MCFG 000000008fefb000 0003C (v01 HP 0944 00000001 HP 00000001) ACPI: SLIC 000000008fefa000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: HPET 000000008fee3000 00038 (v01 HP 0944 00000001 HP 00000001) ACPI: SSDT 000000008fee2000 00386 (v01 AMD PowerNow 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 008ff00000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001694718] TEXT DATA BSS ==> [0001000000 - 0001694718] #3 [0037ef6000 - 0037fef133] RAMDISK ==> [0037ef6000 - 0037fef133] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0001695000 - 00016951b8] BRK ==> [0001695000 - 00016951b8] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880001c00000-ffff880003bfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[5] active PFN ranges 0: 0x00000000 -> 0x00000001 0: 0x00000006 -> 0x0000009f 0: 0x00000100 -> 0x0008cb70 0: 0x0008cb80 -> 0x0008fd4f 0: 0x0008feff -> 0x0008ff00 On node 0 totalpages: 589018 DMA zone: 56 pages used for memmap DMA zone: 102 pages reserved DMA zone: 3836 pages, LIFO batch:0 DMA32 zone: 8005 pages used for memmap DMA32 zone: 577019 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x43538301 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000001000 - 0000000000006000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000ef000 PM: Registered nosave memory: 00000000000ef000 - 0000000000100000 PM: Registered nosave memory: 000000008cb70000 - 000000008cb80000 PM: Registered nosave memory: 000000008fd4f000 - 000000008fdcf000 PM: Registered nosave memory: 000000008fdcf000 - 000000008fecf000 PM: Registered nosave memory: 000000008fecf000 - 000000008feff000 Allocating PCI resources starting at 8ff00000 (gap: 8ff00000:50100000) Booting paravirtualized kernel on bare hardware NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88920 r8192 d21672 u524288 pcpu-alloc: s88920 r8192 d21672 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 580855 Kernel command line: resume=/dev/disk/by-uuid/e5881b27-4b4e-426b-a29a-ec669916af89 root=/dev/disk/by-uuid/08742c2a-3d40-4283-ba08-09ccbf87000a ro PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2308004k/2358272k available (3289k kernel code, 2200k absent, 47420k reserved, 1742k data, 472k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:768 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 1 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 1999.845 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4001.33 BogoMIPS (lpj=6666140) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) tseg: 008ff00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Turion(tm)X2 Dual Core Mobile RM-70 stepping 01 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3991.45 BogoMIPS (lpj=6650327) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: AMD Turion(tm)X2 Dual Core Mobile RM-70 stepping 01 checking TSC synchronization [CPU#0 -> CPU#1]: Measured 16390696 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs Total of 2 processors activated (7993.79 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 NET: Registered protocol family 16 TOM: 00000000a0000000 aka 2560M Fam 10h mmconf [e0000000, efffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 ACPI: Power Resource [APPR] (off) ACPI: Power Resource [PFN0] (off) ACPI: Power Resource [PFN1] (off) ACPI: Power Resource [PFN2] (off) ACPI: Power Resource [PFN3] (off) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:09.0: PME# supported from D0 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:11.0: reg 10 io port: [0x6018-0x601f] pci 0000:00:11.0: reg 14 io port: [0x6024-0x6027] pci 0000:00:11.0: reg 18 io port: [0x6010-0x6017] pci 0000:00:11.0: reg 1c io port: [0x6020-0x6023] pci 0000:00:11.0: reg 20 io port: [0x6000-0x600f] pci 0000:00:11.0: reg 24 32bit mmio: [0xb4409000-0xb44093ff] pci 0000:00:12.0: reg 10 32bit mmio: [0xb4408000-0xb4408fff] pci 0000:00:12.1: reg 10 32bit mmio: [0xb4407000-0xb4407fff] pci 0000:00:12.2: reg 10 32bit mmio: [0xb4409500-0xb44095ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10 32bit mmio: [0xb4406000-0xb4406fff] pci 0000:00:13.1: reg 10 32bit mmio: [0xb4405000-0xb4405fff] pci 0000:00:13.2: reg 10 32bit mmio: [0xb4409400-0xb44094ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.2: reg 10 64bit mmio: [0xb4400000-0xb4403fff] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:00:14.5: reg 10 32bit mmio: [0xb4404000-0xb4404fff] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xa0000000-0xafffffff] pci 0000:01:05.0: reg 14 io port: [0x5000-0x50ff] pci 0000:01:05.0: reg 18 32bit mmio: [0xb4300000-0xb430ffff] pci 0000:01:05.0: reg 24 32bit mmio: [0xb4200000-0xb42fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x5000-0x5fff] pci 0000:00:01.0: bridge 32bit mmio: [0xb4200000-0xb43fffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xa0000000-0xafffffff] pci 0000:02:00.0: reg 10 64bit mmio: [0xb3100000-0xb3103fff] pci 0000:02:00.0: reg 18 io port: [0x3000-0x30ff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:04.0: bridge io port: [0x3000-0x4fff] pci 0000:00:04.0: bridge 32bit mmio: [0xb3100000-0xb41fffff] pci 0000:00:04.0: bridge 64bit mmio pref: [0xb0000000-0xb0ffffff] pci 0000:00:07.0: bridge io port: [0x2000-0x2fff] pci 0000:00:07.0: bridge 32bit mmio: [0xb2100000-0xb30fffff] pci 0000:00:07.0: bridge 64bit mmio pref: [0xb1000000-0xb1ffffff] pci 0000:06:00.0: reg 10 64bit mmio: [0xb2000000-0xb2003fff] pci 0000:06:00.0: supports D1 D2 pci 0000:00:09.0: bridge 32bit mmio: [0xb2000000-0xb20fffff] pci 0000:00:14.4: transparent bridge pci 0000:00:14.4: bridge io port: [0x1000-0x1fff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB9_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet: hpet2 irq 24 for MSI Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:04: ioport range 0x400-0x4cf has been reserved system 00:04: ioport range 0x4d0-0x4d1 has been reserved system 00:04: ioport range 0x4d6-0x4d6 has been reserved system 00:04: ioport range 0x680-0x6ff has been reserved system 00:04: ioport range 0x77a-0x77a has been reserved system 00:04: ioport range 0xc00-0xc01 has been reserved system 00:04: ioport range 0xc14-0xc14 has been reserved system 00:04: ioport range 0xc50-0xc52 has been reserved system 00:04: ioport range 0xc6c-0xc6c has been reserved system 00:04: ioport range 0xc6f-0xc6f has been reserved system 00:04: ioport range 0xcd0-0xcdb has been reserved system 00:04: ioport range 0x220-0x227 has been reserved system 00:04: ioport range 0x260-0x273 has been reserved system 00:04: ioport range 0x800-0x800 has been reserved system 00:04: ioport range 0x804-0x804 has been reserved system 00:04: ioport range 0x87f-0x87f has been reserved system 00:04: ioport range 0xcdc-0xcdf has been reserved system 00:04: ioport range 0xb00-0xb0f has been reserved system 00:04: ioport range 0xb20-0xb3f has been reserved system 00:04: ioport range 0x200-0x27f could not be reserved system 00:05: iomem range 0x0-0x9ffff could not be reserved system 00:05: iomem range 0xec000-0xfffff could not be reserved system 00:05: iomem range 0x100000-0x9fffffff could not be reserved system 00:05: iomem range 0xe0000000-0xefffffff has been reserved system 00:05: iomem range 0xfeb00000-0xfeb00fff has been reserved system 00:05: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x5000-0x5fff pci 0000:00:01.0: MEM window: 0xb4200000-0xb43fffff pci 0000:00:01.0: PREFETCH window: 0x000000a0000000-0x000000afffffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 pci 0000:00:04.0: IO window: 0x3000-0x4fff pci 0000:00:04.0: MEM window: 0xb3100000-0xb41fffff pci 0000:00:04.0: PREFETCH window: 0x000000b0000000-0x000000b0ffffff pci 0000:00:07.0: PCI bridge, secondary bus 0000:03 pci 0000:00:07.0: IO window: 0x2000-0x2fff pci 0000:00:07.0: MEM window: 0xb2100000-0xb30fffff pci 0000:00:07.0: PREFETCH window: 0x000000b1000000-0x000000b1ffffff pci 0000:00:09.0: PCI bridge, secondary bus 0000:06 pci 0000:00:09.0: IO window: disabled pci 0000:00:09.0: MEM window: 0xb2000000-0xb20fffff pci 0000:00:09.0: PREFETCH window: disabled pci 0000:00:14.4: PCI bridge, secondary bus 0000:80 pci 0000:00:14.4: IO window: 0x1000-0x1fff pci 0000:00:14.4: MEM window: disabled pci 0000:00:14.4: PREFETCH window: disabled pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:07.0: setting latency timer to 64 pci 0000:00:09.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x5000-0x5fff] pci_bus 0000:01: resource 1 mem: [0xb4200000-0xb43fffff] pci_bus 0000:01: resource 2 pref mem [0xa0000000-0xafffffff] pci_bus 0000:02: resource 0 io: [0x3000-0x4fff] pci_bus 0000:02: resource 1 mem: [0xb3100000-0xb41fffff] pci_bus 0000:02: resource 2 pref mem [0xb0000000-0xb0ffffff] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff] pci_bus 0000:03: resource 1 mem: [0xb2100000-0xb30fffff] pci_bus 0000:03: resource 2 pref mem [0xb1000000-0xb1ffffff] pci_bus 0000:06: resource 1 mem: [0xb2000000-0xb20fffff] pci_bus 0000:80: resource 0 io: [0x1000-0x1fff] pci_bus 0000:80: resource 3 io: [0x00-0xffff] pci_bus 0000:80: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:01:05.0: Boot video device Unpacking initramfs... Freeing initrd memory: 996k freed Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1260347770.916:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 4511 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:04.0: irq 25 for MSI/MSI-X pcieport 0000:00:04.0: setting latency timer to 64 pcieport 0000:00:07.0: irq 26 for MSI/MSI-X pcieport 0000:00:07.0: setting latency timer to 64 pcieport 0000:00:09.0: irq 27 for MSI/MSI-X pcieport 0000:00:09.0: setting latency timer to 64 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 PM: Checking image partition /dev/disk/by-uuid/e5881b27-4b4e-426b-a29a-ec669916af89 PM: Resume from disk failed. registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 472k freed SCSI subsystem initialized input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 libata version 3.00 loaded. ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pio ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m1024@0xb4409000 port 0xb4409100 irq 20 ata2: SATA max UDMA/133 abar m1024@0xb4409000 port 0xb4409180 irq 20 ata3: SATA max UDMA/133 abar m1024@0xb4409000 port 0xb4409200 irq 20 ata4: SATA max UDMA/133 abar m1024@0xb4409000 port 0xb4409280 irq 20 ata5: SATA max UDMA/133 abar m1024@0xb4409000 port 0xb4409300 irq 20 ata6: SATA max UDMA/133 abar m1024@0xb4409000 port 0xb4409380 irq 20 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: FUJITSU MHZ2160BH G2, 8909, max UDMA/100 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/100 ata3: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T30L, GC04, max UDMA/100 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2160B 8909 PQ: 0 ANSI: 5 ata2.00: configured for UDMA/100 scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T30L GC04 PQ: 0 ANSI: 5 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: setting latency timer to 64 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xb4409500 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: setting latency timer to 64 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xb4409400 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: setting latency timer to 64 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xb4408000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: setting latency timer to 64 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xb4407000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.0: setting latency timer to 64 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 17, io mem 0xb4406000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: setting latency timer to 64 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 17, io mem 0xb4405000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: setting latency timer to 64 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:14.5: irq 18, io mem 0xb4404000 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 1-4: new high speed USB device using ehci_hcd and address 2 usb 1-4: configuration #1 chosen from 1 choice usb 2-2: new high speed USB device using ehci_hcd and address 2 sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk usb 2-2: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 usb 6-3: new full speed USB device using ohci_hcd and address 2 usb 6-3: configuration #1 chosen from 1 choice PM: Starting manual resume from disk PM: Resume from partition 8:7 PM: Checking hibernation image. PM: Error -22 checking image file PM: Resume from disk failed. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 114 bytes nvram, hpet irqs udev: starting version 149 sky2 driver version 1.25 sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sky2 0000:02:00.0: setting latency timer to 64 sky2 0000:02:00.0: Yukon-2 FE+ chip revision 0 sky2 0000:02:00.0: irq 28 for MSI/MSI-X sky2 eth0: addr 00:1f:29:ae:ce:b1 input: PC Speaker as /devices/platform/pcspkr/input/input2 input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 ACPI: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 ACPI: Power Button [PWRF] processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [CPUZ] (82 C) sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0 shpchp 0000:00:01.0: Cannot reserve MMIO region shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb EDAC MC: Ver: 2.1.0 Dec 4 2009 ACPI: AC Adapter [AC] (on-line) ACPI: WMI: Mapper loaded Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0x200000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) EDAC amd64_edac: Ver: 3.2.0 Dec 4 2009 EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded. Either Enable ECC in the BIOS, or set 'ecc_enable_override'. Also, use of the override can cause unknown side effects. amd64_edac: probe of 0000:00:18.2 failed with error -22 Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device CKF7063 (04f2:b083) input: CKF7063 as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input7 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) b43-pci-bridge 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 b43-pci-bridge 0000:06:00.0: setting latency timer to 64 lis3lv02d: laptop model unknown, using default axes configuration lis3lv02d: 1-byte sensor found input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8 Registered led device: hp::hddprotect lis3lv02d driver loaded. ssb: Sonics Silicon Backplane found on PCI device 0000:06:00.0 fan PNP0C0B:00: registered as cooling_device2 ACPI: Fan [FAN0] (off) fan PNP0C0B:01: registered as cooling_device3 ACPI: Fan [FAN1] (off) fan PNP0C0B:02: registered as cooling_device4 ACPI: Fan [FAN2] (off) fan PNP0C0B:03: registered as cooling_device5 ACPI: Fan [FAN3] (off) acpi device:01: registered as cooling_device6 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input9 ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no) scsi 6:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0 sd 6:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:0: [sdb] 29120 512-byte logical blocks: (14.9 MB/14.2 MiB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through usb-storage: device scan complete sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] Attached SCSI removable disk [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 radeon 0000:01:05.0: setting latency timer to 64 [drm] radeon: Initializing kernel modesetting. [drm] register mmio base: 0xB4300000 [drm] register mmio size: 65536 ATOM BIOS: HP_PrincePearl [drm] Clocks initialized ! [drm] Detected VRAM RAM=256M, BAR=256M [drm] RAM width 32bits DDR [TTM] Zone kernel: Available graphics memory: 1155062 kiB. [drm] radeon: 256M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Loading RS780 CP Microcode platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin HDA Intel 0000:00:14.2: power state changed by ACPI to D0 HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Connector 1: [drm] LVDS [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [drm] Encoders: [drm] LCD1: INTERNAL_KLDSCP_LVTMA [drm] fb mappable at 0xA0141000 [drm] vram apper at 0xA0000000 [drm] size 4096000 [drm] fb depth is 24 [drm] pitch is 5120 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input10 executing set pll executing set crtc timing [drm] LVDS-11: set mode 1280x800 17 Console: switching to colour frame buffer device 160x50 fb0: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0 EXT3 FS on sda5, internal journal EXT4-fs (sda6): mounted filesystem with ordered data mode Adding 1903660k swap on /dev/sda7. Priority:-1 extents:1 across:1903660k loop: module loaded sky2 eth0: enabling interface CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready Disabling lock debugging due to kernel taint ndiswrapper version 1.55 loaded (smp=yes, preempt=yes) usbcore: registered new interface driver ndiswrapper b43-pci-bridge 0000:06:00.0: PCI INT A disabled usbcore: deregistering interface driver ndiswrapper ndiswrapper version 1.55 loaded (smp=yes, preempt=yes) ndiswrapper (link_pe_images:575): fixing KI_USER_SHARED_DATA address in the driver ndiswrapper: driver bcmwl5 (Broadcom,04/15/2009, 5.10.91.8) loaded ndiswrapper 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ndiswrapper 0000:06:00.0: setting latency timer to 64 ndiswrapper: using IRQ 17 wlan0: ethernet device 00:21:00:4d:bf:8b using NDIS driver: bcmwl5, version: 0x50a5b08, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4315.5.conf wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK usbcore: registered new interface driver ndiswrapper ADDRCONF(NETDEV_UP): wlan0: link is not ready sky2 eth0: disabling interface sky2 eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present