rigid

$ VERBOSE=1 make
/usr/bin/cmake -S/var/tmp/portage/sci-libs/code-eli-9999/work/code-eli-9999 -B/var/tmp/portage/sci-libs/code-eli-9999/work/build --check-build-system CMakeFiles/Makefile.cmake 0
/usr/bin/cmake -E cmake_progress_start /var/tmp/portage/sci-libs/code-eli-9999/work/build/CMakeFiles /var/tmp/portage/sci-libs/code-eli-9999/work/build/CMakeFiles/progress.marks
make -f CMakeFiles/Makefile2 all
make[1]: Entering directory '/var/tmp/portage/sci-libs/code-eli-9999/work/build'
make -f example/airfoil_fit/CMakeFiles/AirfoilFitExample.dir/build.make example/airfoil_fit/CMakeFiles/AirfoilFitExample.dir/depend
make -f example/vsp_pod/CMakeFiles/VSPPodExample.dir/build.make example/vsp_pod/CMakeFiles/VSPPodExample.dir/depend
make -f test/constants/CMakeFiles/ConstantsMathTest.dir/build.make test/constants/CMakeFiles/ConstantsMathTest.dir/depend
make[2]: Entering directory '/var/tmp/portage/sci-libs/code-eli-9999/work/build'
cd /var/tmp/portage/sci-libs/code-eli-9999/work/build && /usr/bin/cmake -E cmake_depen

rigid

$ make
Scanning dependencies of target ConstantsMathTest
Scanning dependencies of target VSPPodExample
Scanning dependencies of target ADTest
Scanning dependencies of target AirfoilFitExample
Scanning dependencies of target DMTest
[  3%] Building CXX object example/vsp_pod/CMakeFiles/VSPPodExample.dir/vsp_pod.cpp.o
[  3%] Building CXX object test/constants/CMakeFiles/ConstantsMathTest.dir/constants_math_test.cpp.o
[  5%] Building CXX object test/mutil/ad/CMakeFiles/ADTest.dir/ad_test.cpp.o
[  7%] Building CXX object example/airfoil_fit/CMakeFiles/AirfoilFitExample.dir/airfoil_fit.cpp.o

rigid

[daniel:~/code … 66/mine/irrigator/readline-6.3/build] $ LC_ALL="C" CFLAGS="-mlongcalls" LDFLAGS="-nostdlib -Wl,--start-group -lmain -lnet80211 -lwpa -llwip -lpp -lphy -Wl,--end-group -lgcc" ../configure --host=xtensa-lx106-elf --disable-largefile --disable-shared --disable-multibyte --without-curses --without-purify
checking build system type... x86_64-unknown-linux-gnu
checking host system type... xtensa-lx106-elf

Beginning configuration for readline-6.3 for xtensa-lx106-elf

checking whether make sets $(MAKE)... yes
checking for xtensa-lx106-elf-gcc... xtensa-lx106-elf-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out

rigid

# Copyright 1999-2015 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: $

EAPI="4"
SCONS_MIN_VERSION="1.2"
LANGS=" ca de es fr hu nl pl ru se sk"

[[ ${PV} = *9999* ]] && VCS_ECLASS="git-2" || VCS_ECLASS=""

rigid

/********** ACCURATE TIMER for REAL TIME CONTROL ***

This C program illustrates accurate timing on a
Raspberry Pi by sending a 50kHz signal to a GPIO pin
with a jitter of about 0.1 microseconds. It uses the
processor's 1MHz timer and disables interrupts.
It includes GPIO setup and read/write code.

Compiled from console with gcc under the standard
Debian distribution.

rigid

Calculating dependencies  ... done!                                
[ebuild  N     ] dev-python/pillow-2.0.0-r1  USE="jpeg lcms tiff truetype zlib -doc -examples -scanner {-test} -tk -webp" PYTHON_TARGETS="python2_7 python3_3 -python2_6 -python3_2" 1,376 kB
[ebuild  N     ] virtual/python-imaging-2  USE="-tk" PYTHON_TARGETS="python2_7 python3_3 -python2_6 -python3_2" 0 kB
[ebuild  N     ] dev-python/gconf-python-2.28.1:2  USE="-examples" 550 kB
[ebuild  N     ] gnome-extra/gnome-screensaver-3.6.1  USE="pam systemd -debug -doc" 556 kB
[ebuild  N     ] gnome-base/gnome-panel-3.8.0-r1  USE="introspection -eds -networkmanager" 0 kB
[ebuild  N     ] x11-wm/muffin-1.8.2-r1  USE="introspection xinerama {-test}" 2,623 kB
[ebuild  N     ] gnome-extra/nemo-1.8.5  USE="exif introspection (-packagekit) {-test} -tracker -xmp" 3,717 kB
[ebuild  N     ] gnome-extra/cinnamon-1.8.8.1-r1  USE="bluetooth networkmanager" PYTHON_SINGLE_TARGET="python2_7 -python2_6" PYTHON_TARGETS="python2_7 -python2_6" 4,381 kB
[blocks B      ] d

rigid

sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +27.8°C  (crit = +105.0°C)
temp2:        +29.8°C  (crit = +105.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +29.0°C  (high = +80.0°C, crit = +100.0°C)
Core 0:         +28.0°C  (high = +80.0°C, crit = +100.0°C)

rigid

Now follows a summary of the probes I have just done.
Just press ENTER to continue: 

Driver `jc42':
  * Bus `SMBus I801 adapter at 0580'
    Busdriver `i2c_i801', I2C address 0x18
    Chip `Microchip MCP98243' (confidence: 5)

Driver `to-be-written':
  * ISA bus, address 0xca2

rigid

apollo                    
    description: System
    product: X10SLH-F/X10SLM+-F (To be filled by O.E.M.)
    vendor: Supermicro
    version: 0123456789
    serial: 0123456789
    width: 64 bits
    capabilities: smbios-2.7 dmi-2.7 vsyscall32
    configuration: boot=normal chassis=server family=To be filled by O.E.M. sku=To be filled by O.E.M. uuid=00000000-0000-0000-0000-002590D27590
  *-core

rigid

static void RCC_Config(void)
{
	/* RCC system reset */
        RCC_DeInit();

	/* Enable HSE */
        RCC_HSEConfig(RCC_HSE_ON);

        /* Wait till HSE is ready */
	ErrorStatus status;