/gist:4d7df2a904a50873970a
Created Aug 28, 2014
mongo failure
| $ vagrant up | |
| Bringing machine 'default' up with 'virtualbox' provider... | |
| ==> default: Checking if box 'ubuntu/trusty64' is up to date... | |
| ==> default: Clearing any previously set network interfaces... | |
| ==> default: Preparing network interfaces based on configuration... | |
| default: Adapter 1: nat | |
| ==> default: Forwarding ports... | |
| default: 8080 => 28080 (adapter 1) | |
| default: 22 => 2222 (adapter 1) | |
| ==> default: Running 'pre-boot' VM customizations... | |
| ==> default: Booting VM... | |
| ==> default: Waiting for machine to boot. This may take a few minutes... | |
| default: SSH address: 127.0.0.1:2222 | |
| default: SSH username: vagrant | |
| default: SSH auth method: private key | |
| default: Warning: Connection timeout. Retrying... | |
| default: Warning: Remote connection disconnect. Retrying... | |
| ==> default: Machine booted and ready! | |
| ==> default: Checking for guest additions in VM... | |
| ==> default: Setting hostname... | |
| ==> default: Mounting shared folders... | |
| default: /vagrant => /home/richardn/lib/FrameworkBenchmarks/deployment/vagrant-development | |
| default: /FrameworkBenchmarks => /home/richardn/lib/FrameworkBenchmarks | |
| ==> default: Running provisioner: file... | |
| ==> default: Running provisioner: shell... | |
| default: Running: /tmp/vagrant-shell20140828-20774-10bh8dc.sh | |
| ==> default: Setting up convenience hosts entries | |
| ==> default: 127.0.0.1 TFB-database | |
| ==> default: 127.0.0.1 TFB-client | |
| ==> default: 127.0.0.1 TFB-server | |
| ==> default: Installing prerequisites | |
| ==> default: Reading package lists... | |
| ==> default: Building dependency tree... | |
| ==> default: Reading state information... | |
| ==> default: The following extra packages will be installed: | |
| ==> default: git-man liberror-perl | |
| ==> default: Suggested packages: | |
| ==> default: git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk | |
| ==> default: gitweb git-arch git-bzr git-cvs git-mediawiki git-svn | |
| ==> default: The following NEW packages will be installed: | |
| ==> default: git git-man liberror-perl | |
| ==> default: 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. | |
| ==> default: Need to get 3274 kB of archives. | |
| ==> default: After this operation, 21.6 MB of additional disk space will be used. | |
| ==> default: Get:1 http://archive.ubuntu.com/ubuntu/ trusty/main liberror-perl all 0.17-1.1 [21.1 kB] | |
| ==> default: Get:2 http://archive.ubuntu.com/ubuntu/ trusty/main git-man all 1:1.9.1-1 [698 kB] | |
| ==> default: Get:3 http://archive.ubuntu.com/ubuntu/ trusty/main git amd64 1:1.9.1-1 [2555 kB] | |
| ==> default: dpkg-preconfigure: unable to re-open stdin: No such file or directory | |
| ==> default: Fetched 3274 kB in 7s (463 kB/s) | |
| ==> default: Selecting previously unselected package liberror-perl. | |
| ==> default: (Reading database ... 60919 files and directories currently installed.) | |
| ==> default: Preparing to unpack .../liberror-perl_0.17-1.1_all.deb ... | |
| ==> default: Unpacking liberror-perl (0.17-1.1) ... | |
| ==> default: Selecting previously unselected package git-man. | |
| ==> default: Preparing to unpack .../git-man_1%3a1.9.1-1_all.deb ... | |
| ==> default: Unpacking git-man (1:1.9.1-1) ... | |
| ==> default: Selecting previously unselected package git. | |
| ==> default: Preparing to unpack .../git_1%3a1.9.1-1_amd64.deb ... | |
| ==> default: Unpacking git (1:1.9.1-1) ... | |
| ==> default: Processing triggers for man-db (2.6.7.1-1) ... | |
| ==> default: Setting up liberror-perl (0.17-1.1) ... | |
| ==> default: Setting up git-man (1:1.9.1-1) ... | |
| ==> default: Setting up git (1:1.9.1-1) ... | |
| ==> default: Reading package lists... | |
| ==> default: Building dependency tree... | |
| ==> default: Reading state information... | |
| ==> default: The following extra packages will be installed: | |
| ==> default: build-essential dpkg-dev g++ g++-4.8 libalgorithm-diff-perl | |
| ==> default: libalgorithm-diff-xs-perl libalgorithm-merge-perl libdpkg-perl | |
| ==> default: libfile-fcntllock-perl libstdc++-4.8-dev python-colorama python-distlib | |
| ==> default: python-html5lib python-setuptools | |
| ==> default: Suggested packages: | |
| ==> default: debian-keyring g++-multilib g++-4.8-multilib gcc-4.8-doc libstdc++6-4.8-dbg | |
| ==> default: libstdc++-4.8-doc python-lxml python-genshi | |
| ==> default: Recommended packages: | |
| ==> default: python-dev-all | |
| ==> default: The following NEW packages will be installed: | |
| ==> default: build-essential dpkg-dev g++ g++-4.8 libalgorithm-diff-perl | |
| ==> default: libalgorithm-diff-xs-perl libalgorithm-merge-perl libdpkg-perl | |
| ==> default: libfile-fcntllock-perl libstdc++-4.8-dev python-colorama python-distlib | |
| ==> default: python-html5lib python-pip python-setuptools | |
| ==> default: 0 upgraded, 15 newly installed, 0 to remove and 0 not upgraded. | |
| ==> default: Need to get 9633 kB of archives. | |
| ==> default: After this operation, 35.8 MB of additional disk space will be used. | |
| ==> default: Get:1 http://archive.ubuntu.com/ubuntu/ trusty/main libstdc++-4.8-dev amd64 4.8.2-19ubuntu1 [1050 kB] | |
| ==> default: Get:2 http://archive.ubuntu.com/ubuntu/ trusty/main g++-4.8 amd64 4.8.2-19ubuntu1 [7038 kB] | |
| ==> default: Get:3 http://archive.ubuntu.com/ubuntu/ trusty/main g++ amd64 4:4.8.2-1ubuntu6 [1490 B] | |
| ==> default: Get:4 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libdpkg-perl all 1.17.5ubuntu5.3 [179 kB] | |
| ==> default: Get:5 http://archive.ubuntu.com/ubuntu/ trusty-updates/main dpkg-dev all 1.17.5ubuntu5.3 [726 kB] | |
| ==> default: Get:6 http://archive.ubuntu.com/ubuntu/ trusty/main build-essential amd64 11.6ubuntu6 [4838 B] | |
| ==> default: Get:7 http://archive.ubuntu.com/ubuntu/ trusty/main libalgorithm-diff-perl all 1.19.02-3 [50.0 kB] | |
| ==> default: Get:8 http://archive.ubuntu.com/ubuntu/ trusty/main libalgorithm-diff-xs-perl amd64 0.04-2build4 [12.6 kB] | |
| ==> default: Get:9 http://archive.ubuntu.com/ubuntu/ trusty/main libalgorithm-merge-perl all 0.08-2 [12.7 kB] | |
| ==> default: Get:10 http://archive.ubuntu.com/ubuntu/ trusty/main libfile-fcntllock-perl amd64 0.14-2build1 [15.9 kB] | |
| ==> default: Get:11 http://archive.ubuntu.com/ubuntu/ trusty/universe python-colorama all 0.2.5-0.1ubuntu1 [18.3 kB] | |
| ==> default: Get:12 http://archive.ubuntu.com/ubuntu/ trusty/universe python-distlib all 0.1.8-1 [113 kB] | |
| ==> default: Get:13 http://archive.ubuntu.com/ubuntu/ trusty/main python-html5lib all 0.999-2 [83.2 kB] | |
| ==> default: Get:14 http://archive.ubuntu.com/ubuntu/ trusty/main python-setuptools all 3.3-1ubuntu1 [230 kB] | |
| ==> default: Get:15 http://archive.ubuntu.com/ubuntu/ trusty/universe python-pip all 1.5.4-1 [97.7 kB] | |
| ==> default: dpkg-preconfigure: unable to re-open stdin: No such file or directory | |
| ==> default: Fetched 9633 kB in 12s (795 kB/s) | |
| ==> default: Selecting previously unselected package libstdc++-4.8-dev:amd64. | |
| ==> default: (Reading database ... 61667 files and directories currently installed.) | |
| ==> default: Preparing to unpack .../libstdc++-4.8-dev_4.8.2-19ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libstdc++-4.8-dev:amd64 (4.8.2-19ubuntu1) ... | |
| ==> default: Selecting previously unselected package g++-4.8. | |
| ==> default: Preparing to unpack .../g++-4.8_4.8.2-19ubuntu1_amd64.deb ... | |
| ==> default: Unpacking g++-4.8 (4.8.2-19ubuntu1) ... | |
| ==> default: Selecting previously unselected package g++. | |
| ==> default: Preparing to unpack .../g++_4%3a4.8.2-1ubuntu6_amd64.deb ... | |
| ==> default: Unpacking g++ (4:4.8.2-1ubuntu6) ... | |
| ==> default: Selecting previously unselected package libdpkg-perl. | |
| ==> default: Preparing to unpack .../libdpkg-perl_1.17.5ubuntu5.3_all.deb ... | |
| ==> default: Unpacking libdpkg-perl (1.17.5ubuntu5.3) ... | |
| ==> default: Selecting previously unselected package dpkg-dev. | |
| ==> default: Preparing to unpack .../dpkg-dev_1.17.5ubuntu5.3_all.deb ... | |
| ==> default: Unpacking dpkg-dev (1.17.5ubuntu5.3) ... | |
| ==> default: Selecting previously unselected package build-essential. | |
| ==> default: Preparing to unpack .../build-essential_11.6ubuntu6_amd64.deb ... | |
| ==> default: Unpacking build-essential (11.6ubuntu6) ... | |
| ==> default: Selecting previously unselected package libalgorithm-diff-perl. | |
| ==> default: Preparing to unpack .../libalgorithm-diff-perl_1.19.02-3_all.deb ... | |
| ==> default: Unpacking libalgorithm-diff-perl (1.19.02-3) ... | |
| ==> default: Selecting previously unselected package libalgorithm-diff-xs-perl. | |
| ==> default: Preparing to unpack .../libalgorithm-diff-xs-perl_0.04-2build4_amd64.deb ... | |
| ==> default: Unpacking libalgorithm-diff-xs-perl (0.04-2build4) ... | |
| ==> default: Selecting previously unselected package libalgorithm-merge-perl. | |
| ==> default: Preparing to unpack .../libalgorithm-merge-perl_0.08-2_all.deb ... | |
| ==> default: Unpacking libalgorithm-merge-perl (0.08-2) ... | |
| ==> default: Selecting previously unselected package libfile-fcntllock-perl. | |
| ==> default: Preparing to unpack .../libfile-fcntllock-perl_0.14-2build1_amd64.deb ... | |
| ==> default: Unpacking libfile-fcntllock-perl (0.14-2build1) ... | |
| ==> default: Selecting previously unselected package python-colorama. | |
| ==> default: Preparing to unpack .../python-colorama_0.2.5-0.1ubuntu1_all.deb ... | |
| ==> default: Unpacking python-colorama (0.2.5-0.1ubuntu1) ... | |
| ==> default: Selecting previously unselected package python-distlib. | |
| ==> default: Preparing to unpack .../python-distlib_0.1.8-1_all.deb ... | |
| ==> default: Unpacking python-distlib (0.1.8-1) ... | |
| ==> default: Selecting previously unselected package python-html5lib. | |
| ==> default: Preparing to unpack .../python-html5lib_0.999-2_all.deb ... | |
| ==> default: Unpacking python-html5lib (0.999-2) ... | |
| ==> default: Selecting previously unselected package python-setuptools. | |
| ==> default: Preparing to unpack .../python-setuptools_3.3-1ubuntu1_all.deb ... | |
| ==> default: Unpacking python-setuptools (3.3-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package python-pip. | |
| ==> default: Preparing to unpack .../python-pip_1.5.4-1_all.deb ... | |
| ==> default: Unpacking python-pip (1.5.4-1) ... | |
| ==> default: Processing triggers for man-db (2.6.7.1-1) ... | |
| ==> default: Setting up libstdc++-4.8-dev:amd64 (4.8.2-19ubuntu1) ... | |
| ==> default: Setting up g++-4.8 (4.8.2-19ubuntu1) ... | |
| ==> default: Setting up g++ (4:4.8.2-1ubuntu6) ... | |
| ==> default: update-alternatives: | |
| ==> default: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode | |
| ==> default: Setting up libdpkg-perl (1.17.5ubuntu5.3) ... | |
| ==> default: Setting up dpkg-dev (1.17.5ubuntu5.3) ... | |
| ==> default: Setting up build-essential (11.6ubuntu6) ... | |
| ==> default: Setting up libalgorithm-diff-perl (1.19.02-3) ... | |
| ==> default: Setting up libalgorithm-diff-xs-perl (0.04-2build4) ... | |
| ==> default: Setting up libalgorithm-merge-perl (0.08-2) ... | |
| ==> default: Setting up libfile-fcntllock-perl (0.14-2build1) ... | |
| ==> default: Setting up python-colorama (0.2.5-0.1ubuntu1) ... | |
| ==> default: Setting up python-distlib (0.1.8-1) ... | |
| ==> default: Setting up python-html5lib (0.999-2) ... | |
| ==> default: Setting up python-setuptools (3.3-1ubuntu1) ... | |
| ==> default: Setting up python-pip (1.5.4-1) ... | |
| ==> default: Removing installs/ and results/ folders so they do not interfere | |
| ==> default: Downloading/unpacking colorama==0.3.1 (from -r /home/vagrant/FrameworkBenchmarks/config/python_requirements.txt (line 1)) | |
| ==> default: Downloading colorama-0.3.1.tar.gz | |
| ==> default: Running setup.py (path:/tmp/pip_build_root/colorama/setup.py) egg_info for package colorama | |
| ==> default: | |
| ==> default: Downloading/unpacking progressbar==2.2 (from -r /home/vagrant/FrameworkBenchmarks/config/python_requirements.txt (line 4)) | |
| ==> default: Downloading progressbar-2.2.tar.gz | |
| ==> default: Running setup.py (path:/tmp/pip_build_root/progressbar/setup.py) egg_info for package progressbar | |
| ==> default: | |
| ==> default: Installing collected packages: colorama, progressbar | |
| ==> default: Found existing installation: colorama 0.2.5 | |
| ==> default: Uninstalling colorama: | |
| ==> default: Successfully uninstalled colorama | |
| ==> default: Running setup.py install for colorama | |
| ==> default: | |
| ==> default: Running setup.py install for progressbar | |
| ==> default: | |
| ==> default: Successfully installed colorama progressbar | |
| ==> default: Cleaning up... | |
| ==> default: Setting up SSH access to localhost | |
| ==> default: Generating public/private rsa key pair. | |
| ==> default: Your identification has been saved in /home/vagrant/.ssh/id_rsa. | |
| ==> default: Your public key has been saved in /home/vagrant/.ssh/id_rsa.pub. | |
| ==> default: The key fingerprint is: | |
| ==> default: b6:f0:98:0d:93:33:62:0a:e8:64:ea:03:d4:45:90:71 vagrant@TFB-all | |
| ==> default: The key's randomart image is: | |
| ==> default: +--[ RSA 2048]----+ | |
| ==> default: | o=E | | |
| ==> default: | ... | | |
| ==> default: | . . | | |
| ==> default: |.. . . | | |
| ==> default: |+o o B S | | |
| ==> default: |*. o . % . | | |
| ==> default: |o.. o + | | |
| ==> default: |.. | | |
| ==> default: | .. | | |
| ==> default: +-----------------+ | |
| ==> default: Installing all software | |
| ==> default: FWROOT is /home/vagrant/FrameworkBenchmarks | |
| ==> default: Configuration options: | |
| ==> default: Namespace(client-host='localhost', client_host='127.0.0.1', client_identity_file='/home/vagrant/.ssh/id_rsa', client_user='vagrant', conf_file='benchmark.cfg', database_host='127.0.0.1', database_identity_file='/home/vagrant/.ssh/id_rsa', database_os='linux', database_user='vagrant', duration=15, exclude=None, install='all', install_error_action='continue', install_only=True, install_strategy='unified', list_test_metadata=False, list_tests=False, max_concurrency=256, max_queries=20, max_threads=1, mode='benchmark', name='ec2', os='linux', parse=None, password_prompt=False, query_interval=5, server_host='127.0.0.1', sleep=60, starting_concurrency=8, test=[''], type='all', verbose=True) | |
| ==> default: WARNING:root:results.json for test ec2 not found. | |
| ==> default: WARNING:root:Please add an empty __init__.py file to directory /home/vagrant/FrameworkBenchmarks/frameworks/Erlang/elli | |
| ==> default: WARNING:root:Please add an empty __init__.py file to directory /home/vagrant/FrameworkBenchmarks/frameworks/Erlang/cowboy | |
| ==> default: | |
| ==> default: INSTALL: Installing server software (strategy=unified) | |
| ==> default: INSTALL: . $FWROOT/toolset/setup/linux/bash_functions.sh && . $FWROOT/toolset/setup/linux/prerequisites.sh (cwd=$FWROOTinstalls) | |
| ==> default: Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --homedir /tmp/tmp.lzVtMhdMoL --no-auto-check-trustdb --trust-model always --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80 --recv 7F0CEB10 | |
| ==> default: gpg: | |
| ==> default: requesting key 7F0CEB10 from hkp server keyserver.ubuntu.com | |
| ==> default: gpg: | |
| ==> default: key 7F0CEB10: public key "Richard Kreuter <richard@10gen.com>" imported | |
| ==> default: gpg: | |
| ==> default: Total number processed: 1 | |
| ==> default: gpg: | |
| ==> default: imported: 1 | |
| ==> default: (RSA: 1) | |
| ==> default: deb http://downloads-distro.mongodb.org/repo/ubuntu-upstart dist 10gen | |
| ==> default: Ign http://security.ubuntu.com trusty-security InRelease | |
| ==> default: Ign http://archive.ubuntu.com trusty InRelease | |
| ==> default: Ign http://downloads-distro.mongodb.org dist InRelease | |
| ==> default: Get:1 http://security.ubuntu.com trusty-security Release.gpg [933 B] | |
| ==> default: Ign http://archive.ubuntu.com trusty-updates InRelease | |
| ==> default: Get:2 http://security.ubuntu.com trusty-security Release [59.7 kB] | |
| ==> default: Hit http://archive.ubuntu.com trusty Release.gpg | |
| ==> default: Get:3 http://downloads-distro.mongodb.org dist Release.gpg [490 B] | |
| ==> default: Get:4 http://archive.ubuntu.com trusty-updates Release.gpg [933 B] | |
| ==> default: Hit http://archive.ubuntu.com trusty Release | |
| ==> default: Get:5 http://downloads-distro.mongodb.org dist Release [2,032 B] | |
| ==> default: Get:6 http://archive.ubuntu.com trusty-updates Release [59.7 kB] | |
| ==> default: Get:7 http://security.ubuntu.com trusty-security/main Sources [42.3 kB] | |
| ==> default: Get:8 http://downloads-distro.mongodb.org dist/10gen amd64 Packages [21.0 kB] | |
| ==> default: Get:9 http://security.ubuntu.com trusty-security/universe Sources [10.8 kB] | |
| ==> default: Get:10 http://archive.ubuntu.com trusty/main Sources [1,064 kB] | |
| ==> default: Get:11 http://security.ubuntu.com trusty-security/main amd64 Packages [133 kB] | |
| ==> default: Get:12 http://security.ubuntu.com trusty-security/universe amd64 Packages [46.9 kB] | |
| ==> default: Get:13 http://security.ubuntu.com trusty-security/main Translation-en [64.6 kB] | |
| ==> default: Get:14 http://security.ubuntu.com trusty-security/universe Translation-en [26.8 kB] | |
| ==> default: Get:15 http://archive.ubuntu.com trusty/universe Sources [6,399 kB] | |
| ==> default: Ign http://downloads-distro.mongodb.org dist/10gen Translation-en_US | |
| ==> default: Ign http://downloads-distro.mongodb.org dist/10gen Translation-en | |
| ==> default: Hit http://archive.ubuntu.com trusty/main amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty/universe amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty/main Translation-en | |
| ==> default: Hit http://archive.ubuntu.com trusty/universe Translation-en | |
| ==> default: Get:16 http://archive.ubuntu.com trusty-updates/main Sources [112 kB] | |
| ==> default: Get:17 http://archive.ubuntu.com trusty-updates/universe Sources [77.8 kB] | |
| ==> default: Get:18 http://archive.ubuntu.com trusty-updates/main amd64 Packages [303 kB] | |
| ==> default: Get:19 http://archive.ubuntu.com trusty-updates/universe amd64 Packages [189 kB] | |
| ==> default: Get:20 http://archive.ubuntu.com trusty-updates/main Translation-en [134 kB] | |
| ==> default: Get:21 http://archive.ubuntu.com trusty-updates/universe Translation-en [93.2 kB] | |
| ==> default: Ign http://archive.ubuntu.com trusty/main Translation-en_US | |
| ==> default: Ign http://archive.ubuntu.com trusty/universe Translation-en_US | |
| ==> default: Fetched 8,842 kB in 12s (687 kB/s) | |
| ==> default: Reading package lists... | |
| ==> default: Reading package lists... | |
| ==> default: Building dependency tree... | |
| ==> default: Reading state information... | |
| ==> default: The following packages will be upgraded: | |
| ==> default: gir1.2-glib-2.0 libgirepository-1.0-1 python-secretstorage | |
| ==> default: python3-distupgrade rpcbind ubuntu-release-upgrader-core | |
| ==> default: 6 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. | |
| ==> default: Need to get 385 kB of archives. | |
| ==> default: After this operation, 3,072 B of additional disk space will be used. | |
| ==> default: Get:1 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libgirepository-1.0-1 amd64 1.40.0-1ubuntu0.2 [85.6 kB] | |
| ==> default: Get:2 http://archive.ubuntu.com/ubuntu/ trusty-updates/main gir1.2-glib-2.0 amd64 1.40.0-1ubuntu0.2 [124 kB] | |
| ==> default: Get:3 http://archive.ubuntu.com/ubuntu/ trusty-updates/main ubuntu-release-upgrader-core all 1:0.220.4 [23.1 kB] | |
| ==> default: Get:4 http://archive.ubuntu.com/ubuntu/ trusty-updates/main python3-distupgrade all 1:0.220.4 [104 kB] | |
| ==> default: Get:5 http://archive.ubuntu.com/ubuntu/ trusty-updates/main python-secretstorage all 2.0.0-1ubuntu1.1 [11.7 kB] | |
| ==> default: Get:6 http://archive.ubuntu.com/ubuntu/ trusty-updates/main rpcbind amd64 0.2.1-2ubuntu2.1 [37.0 kB] | |
| ==> default: debconf: unable to initialize frontend: Dialog | |
| ==> default: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) | |
| ==> default: debconf: falling back to frontend: Readline | |
| ==> default: debconf: unable to initialize frontend: Readline | |
| ==> default: debconf: (This frontend requires a controlling tty.) | |
| ==> default: debconf: falling back to frontend: Teletype | |
| ==> default: dpkg-preconfigure: unable to re-open stdin: | |
| ==> default: Fetched 385 kB in 6s (63.6 kB/s) | |
| ==> default: (Reading database ... 63104 files and directories currently installed.) | |
| ==> default: Preparing to unpack .../libgirepository-1.0-1_1.40.0-1ubuntu0.2_amd64.deb ... | |
| ==> default: Unpacking libgirepository-1.0-1 (1.40.0-1ubuntu0.2) over (1.40.0-1ubuntu0.1) ... | |
| ==> default: Preparing to unpack .../gir1.2-glib-2.0_1.40.0-1ubuntu0.2_amd64.deb ... | |
| ==> default: Unpacking gir1.2-glib-2.0 (1.40.0-1ubuntu0.2) over (1.40.0-1ubuntu0.1) ... | |
| ==> default: Preparing to unpack .../ubuntu-release-upgrader-core_1%3a0.220.4_all.deb ... | |
| ==> default: Unpacking ubuntu-release-upgrader-core (1:0.220.4) over (1:0.220.2) ... | |
| ==> default: Preparing to unpack .../python3-distupgrade_1%3a0.220.4_all.deb ... | |
| ==> default: Unpacking python3-distupgrade (1:0.220.4) over (1:0.220.2) ... | |
| ==> default: Preparing to unpack .../python-secretstorage_2.0.0-1ubuntu1.1_all.deb ... | |
| ==> default: Unpacking python-secretstorage (2.0.0-1ubuntu1.1) over (2.0.0-1ubuntu1) ... | |
| ==> default: Preparing to unpack .../rpcbind_0.2.1-2ubuntu2.1_amd64.deb ... | |
| ==> default: rpcbind stop/waiting | |
| ==> default: Unpacking rpcbind (0.2.1-2ubuntu2.1) over (0.2.1-2ubuntu1) ... | |
| ==> default: Processing triggers for man-db (2.6.7.1-1) ... | |
| ==> default: debconf: unable to initialize frontend: Dialog | |
| ==> default: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) | |
| ==> default: debconf: falling back to frontend: Readline | |
| ==> default: debconf: unable to initialize frontend: Readline | |
| ==> default: debconf: (This frontend requires a controlling tty.) | |
| ==> default: debconf: falling back to frontend: Teletype | |
| ==> default: Processing triggers for ureadahead (0.100.0-16) ... | |
| ==> default: Setting up libgirepository-1.0-1 (1.40.0-1ubuntu0.2) ... | |
| ==> default: Setting up gir1.2-glib-2.0 (1.40.0-1ubuntu0.2) ... | |
| ==> default: Setting up python3-distupgrade (1:0.220.4) ... | |
| ==> default: Setting up ubuntu-release-upgrader-core (1:0.220.4) ... | |
| ==> default: Setting up python-secretstorage (2.0.0-1ubuntu1.1) ... | |
| ==> default: Setting up rpcbind (0.2.1-2ubuntu2.1) ... | |
| ==> default: rpcbind start/running, process 7666 | |
| ==> default: Processing triggers for libc-bin (2.19-0ubuntu6.1) ... | |
| ==> default: Reading package lists... | |
| ==> default: Building dependency tree... | |
| ==> default: Reading state information... | |
| ==> default: build-essential is already the newest version. | |
| ==> default: build-essential set to manually installed. | |
| ==> default: curl is already the newest version. | |
| ==> default: libpcre3 is already the newest version. | |
| ==> default: wget is already the newest version. | |
| ==> default: software-properties-common is already the newest version. | |
| ==> default: The following extra packages will be installed: | |
| ==> default: autoconf autotools-dev cmake-data comerr-dev fontconfig fontconfig-config | |
| ==> default: fonts-dejavu-core hicolor-icon-theme icu-devtools krb5-multidev libarchive13 | |
| ==> default: libasprintf-dev libatk1.0-0 libatk1.0-data libavahi-client3 | |
| ==> default: libavahi-common-data libavahi-common3 libbison-dev libcairo2 libcroco3 | |
| ==> default: libcups2 libdatrie1 libevent-core-2.0-5 libevent-extra-2.0-5 | |
| ==> default: libevent-openssl-2.0-5 libevent-pthreads-2.0-5 libfontconfig1 | |
| ==> default: libgcrypt11-dev libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-common libgettextpo-dev | |
| ==> default: libgettextpo0 libgmp-dev libgmpxx4ldbl libgnutlsxx27 libgpg-error-dev | |
| ==> default: libgraphite2-3 libgssrpc4 libgtk2.0-0 libgtk2.0-bin libgtk2.0-common | |
| ==> default: libharfbuzz0b libidn11-dev libjasper1 libjbig0 libjpeg-turbo8 libjpeg8 | |
| ==> default: libjson-c-dev libkadm5clnt-mit9 libkadm5srv-mit9 libkdb5-7 libkrb5-dev | |
| ==> default: libldap2-dev libltdl-dev libltdl7 liblzo2-2 libmcrypt4 libmysqlclient18 | |
| ==> default: libnettle4 libp11-kit-dev libpango-1.0-0 libpangocairo-1.0-0 | |
| ==> default: libpangoft2-1.0-0 libpq5 libregexp-common-perl librtmp-dev libssl-doc | |
| ==> default: libtasn1-6-dev libtcl8.6 libthai-data libthai0 libtiff5 libtinfo-dev | |
| ==> default: libtk8.6 libunistring0 libutempter0 libxcb-render0 libxcb-shape0 libxcb-shm0 | |
| ==> default: libxcursor1 libxft2 libxi6 libxinerama1 libxslt1.1 libxss1 libxtst6 libxv1 | |
| ==> default: libxxf86dga1 m4 mercurial-common mlton-basis mlton-compiler mlton-doc | |
| ==> default: mlton-runtime-native mlton-runtime-x86-64-linux-gnu mlton-tools mysql-common | |
| ==> default: pkg-config tcl tcl8.6 tk tk8.6 x11-utils xbitmaps xterm | |
| ==> default: Suggested packages: | |
| ==> default: autoconf2.13 autoconf-archive gnu-standards autoconf-doc bison-doc | |
| ==> default: codeblocks eclipse doc-base gettext-doc krb5-doc lrzip cups-common | |
| ==> default: libcurl4-doc libcurl3-dbg libgcrypt11-doc libgmp10-doc libmpfr-dev | |
| ==> default: gnutls26-doc gnutls-bin krb5-user libvisual-0.4-plugins | |
| ==> default: gstreamer-codec-install gnome-codec-install gstreamer0.10-tools | |
| ==> default: gstreamer0.10-plugins-base librsvg2-common gvfs icu-doc libjasper-runtime | |
| ==> default: libtool-doc mcrypt ncurses-doc ttf-baekmuk ttf-arphic-gbsn00lp | |
| ==> default: ttf-arphic-bsmi00lp ttf-arphic-gkai00mp ttf-arphic-bkai00mp | |
| ==> default: postgresql-doc-9.3 sqlite3-doc automaken gfortran fortran95-compiler gcj-jdk | |
| ==> default: qct kdiff3 kdiff3-qt kompare meld tkcvs mgdiff python-mysqldb | |
| ==> default: python-pygments tcl-tclreadline mesa-utils xfonts-cyrillic | |
| ==> default: Recommended packages: | |
| ==> default: wish | |
| ==> default: The following NEW packages will be installed: | |
| ==> default: autoconf automake autotools-dev bison cloc cmake cmake-data comerr-dev dstat | |
| ==> default: fontconfig fontconfig-config fonts-dejavu-core gettext git-core | |
| ==> default: hicolor-icon-theme htop icu-devtools krb5-multidev libarchive13 | |
| ==> default: libasprintf-dev libatk1.0-0 libatk1.0-data libavahi-client3 | |
| ==> default: libavahi-common-data libavahi-common3 libbison-dev libbz2-dev libcairo2 | |
| ==> default: libcroco3 libcups2 libcurl4-openssl-dev libdatrie1 libevent-core-2.0-5 | |
| ==> default: libevent-dev libevent-extra-2.0-5 libevent-openssl-2.0-5 | |
| ==> default: libevent-pthreads-2.0-5 libffi-dev libfontconfig1 libgcrypt11-dev | |
| ==> default: libgdbm-dev libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-common libgettextpo-dev | |
| ==> default: libgettextpo0 libgmp-dev libgmpxx4ldbl libgnutls-dev libgnutlsxx27 | |
| ==> default: libgpg-error-dev libgraphite2-3 libgssrpc4 libgstreamer-plugins-base0.10-0 | |
| ==> default: libgstreamer0.10-0 libgtk2.0-0 libgtk2.0-bin libgtk2.0-common libharfbuzz0b | |
| ==> default: libicu-dev libidn11-dev libjasper1 libjbig0 libjpeg-turbo8 libjpeg8 | |
| ==> default: libjson-c-dev libjson0-dev libkadm5clnt-mit9 libkadm5srv-mit9 libkdb5-7 | |
| ==> default: libkrb5-dev libldap2-dev libltdl-dev libltdl7 liblzo2-2 libmcrypt-dev | |
| ==> default: libmcrypt4 libmysqlclient-dev libmysqlclient18 libncurses5-dev libnettle4 | |
| ==> default: liborc-0.4-0 libp11-kit-dev libpango-1.0-0 libpangocairo-1.0-0 | |
| ==> default: libpangoft2-1.0-0 libpcre3-dev libpcrecpp0 libpq-dev libpq5 libreadline6-dev | |
| ==> default: libregexp-common-perl librtmp-dev libsqlite3-dev libssl-dev libssl-doc | |
| ==> default: libtasn1-6-dev libtcl8.6 libthai-data libthai0 libtiff5 libtinfo-dev | |
| ==> default: libtk8.6 libtool libunistring0 libutempter0 libwxbase2.8-0 libwxgtk2.8-0 | |
| ==> default: libxcb-render0 libxcb-shape0 libxcb-shm0 libxcursor1 libxft2 libxi6 | |
| ==> default: libxinerama1 libxml2-dev libxslt1-dev libxslt1.1 libxss1 libxtst6 libxv1 | |
| ==> default: libxxf86dga1 libyaml-dev m4 mercurial mercurial-common mlton mlton-basis | |
| ==> default: mlton-compiler mlton-doc mlton-runtime-native mlton-runtime-x86-64-linux-gnu | |
| ==> default: mlton-tools mongodb-org-shell mysql-common pkg-config | |
| ==> default: python-software-properties sqlite3 tcl tcl8.6 tk tk8.6 unzip x11-utils | |
| ==> default: xbitmaps xterm zlib1g-dev | |
| ==> default: 0 upgraded, 146 newly installed, 0 to remove and 0 not upgraded. | |
| ==> default: Need to get 55.5 MB of archives. | |
| ==> default: After this operation, 228 MB of additional disk space will be used. | |
| ==> default: Get:1 http://archive.ubuntu.com/ubuntu/ trusty-updates/main liblzo2-2 amd64 2.06-1.2ubuntu1.1 [46.1 kB] | |
| ==> default: Get:2 http://downloads-distro.mongodb.org/repo/ubuntu-upstart/ dist/10gen mongodb-org-shell amd64 2.6.4 [4,457 kB] | |
| ==> default: Get:3 http://archive.ubuntu.com/ubuntu/ trusty/main libnettle4 amd64 2.7.1-1 [121 kB] | |
| ==> default: Get:4 http://archive.ubuntu.com/ubuntu/ trusty/main libarchive13 amd64 3.1.2-7ubuntu2 [259 kB] | |
| ==> default: Get:5 http://archive.ubuntu.com/ubuntu/ trusty/main libatk1.0-data all 2.10.0-2ubuntu2 [13.7 kB] | |
| ==> default: Get:6 http://archive.ubuntu.com/ubuntu/ trusty/main libatk1.0-0 amd64 2.10.0-2ubuntu2 [50.9 kB] | |
| ==> default: Get:7 http://archive.ubuntu.com/ubuntu/ trusty/main libavahi-common-data amd64 0.6.31-4ubuntu1 [21.2 kB] | |
| ==> default: Get:8 http://archive.ubuntu.com/ubuntu/ trusty/main libavahi-common3 amd64 0.6.31-4ubuntu1 [21.7 kB] | |
| ==> default: Get:9 http://archive.ubuntu.com/ubuntu/ trusty/main libavahi-client3 amd64 0.6.31-4ubuntu1 [25.1 kB] | |
| ==> default: Get:10 http://archive.ubuntu.com/ubuntu/ trusty/main fonts-dejavu-core all 2.34-1ubuntu1 [1,024 kB] | |
| ==> default: Get:11 http://archive.ubuntu.com/ubuntu/ trusty-updates/main fontconfig-config all 2.11.0-0ubuntu4.1 [47.4 kB] | |
| ==> default: Get:12 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libfontconfig1 amd64 2.11.0-0ubuntu4.1 [123 kB] | |
| ==> default: Get:13 http://archive.ubuntu.com/ubuntu/ trusty/main libxcb-render0 amd64 1.10-2ubuntu1 [11.0 kB] | |
| ==> default: Get:14 http://archive.ubuntu.com/ubuntu/ trusty/main libxcb-shm0 amd64 1.10-2ubuntu1 [5,432 B] | |
| ==> default: Get:15 http://archive.ubuntu.com/ubuntu/ trusty/main libcairo2 amd64 1.13.0~20140204-0ubuntu1 [535 kB] | |
| ==> default: Get:16 http://archive.ubuntu.com/ubuntu/ trusty/main libcroco3 amd64 0.6.8-2ubuntu1 [82.4 kB] | |
| ==> default: Get:17 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libcups2 amd64 1.7.2-0ubuntu1.1 [179 kB] | |
| ==> default: Get:18 http://archive.ubuntu.com/ubuntu/ trusty/main libdatrie1 amd64 0.2.8-1 [16.7 kB] | |
| ==> default: Get:19 http://archive.ubuntu.com/ubuntu/ trusty/main libevent-core-2.0-5 amd64 2.0.21-stable-1ubuntu1 [77.9 kB] | |
| ==> default: Get:20 http://archive.ubuntu.com/ubuntu/ trusty/main libevent-extra-2.0-5 amd64 2.0.21-stable-1ubuntu1 [57.8 kB] | |
| ==> default: Get:21 http://archive.ubuntu.com/ubuntu/ trusty/main libevent-openssl-2.0-5 amd64 2.0.21-stable-1ubuntu1 [12.7 kB] | |
| ==> default: Get:22 http://archive.ubuntu.com/ubuntu/ trusty/main libevent-pthreads-2.0-5 amd64 2.0.21-stable-1ubuntu1 [6,132 B] | |
| ==> default: Get:23 http://archive.ubuntu.com/ubuntu/ trusty/main libjpeg-turbo8 amd64 1.3.0-0ubuntu2 [104 kB] | |
| ==> default: Get:24 http://archive.ubuntu.com/ubuntu/ trusty/main libjpeg8 amd64 8c-2ubuntu8 [2,194 B] | |
| ==> default: Get:25 http://archive.ubuntu.com/ubuntu/ trusty/main libjasper1 amd64 1.900.1-14ubuntu3 [129 kB] | |
| ==> default: Get:26 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libjbig0 amd64 2.0-2ubuntu4.1 [26.1 kB] | |
| ==> default: Get:27 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libtiff5 amd64 4.0.3-7ubuntu0.1 [142 kB] | |
| ==> default: Get:28 http://archive.ubuntu.com/ubuntu/ trusty/main libgdk-pixbuf2.0-common all 2.30.7-0ubuntu1 [8,610 B] | |
| ==> default: Get:29 http://archive.ubuntu.com/ubuntu/ trusty/main libgdk-pixbuf2.0-0 amd64 2.30.7-0ubuntu1 [160 kB] | |
| ==> default: Get:30 http://archive.ubuntu.com/ubuntu/ trusty/main libunistring0 amd64 0.9.3-5ubuntu3 [271 kB] | |
| ==> default: Get:31 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libgettextpo0 amd64 0.18.3.1-1ubuntu3 [108 kB] | |
| ==> default: Get:32 http://archive.ubuntu.com/ubuntu/ trusty/main libgmpxx4ldbl amd64 2:5.1.3+dfsg-1ubuntu1 [8,736 B] | |
| ==> default: Get:33 http://archive.ubuntu.com/ubuntu/ trusty/main libgraphite2-3 amd64 1.2.4-1ubuntu1 [53.8 kB] | |
| ==> default: Get:34 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libgssrpc4 amd64 1.12+dfsg-2ubuntu4.2 [53.1 kB] | |
| ==> default: Get:35 http://archive.ubuntu.com/ubuntu/ trusty/main libgstreamer0.10-0 amd64 0.10.36-1.2ubuntu3 [618 kB] | |
| ==> default: Get:36 http://archive.ubuntu.com/ubuntu/ trusty/main liborc-0.4-0 amd64 1:0.4.18-1ubuntu1 [136 kB] | |
| ==> default: Get:37 http://archive.ubuntu.com/ubuntu/ trusty/main libgstreamer-plugins-base0.10-0 amd64 0.10.36-1.1ubuntu2 [426 kB] | |
| ==> default: Get:38 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libgtk2.0-common all 2.24.23-0ubuntu1.1 [121 kB] | |
| ==> default: Get:39 http://archive.ubuntu.com/ubuntu/ trusty/main libthai-data all 0.1.20-3 [130 kB] | |
| ==> default: Get:40 http://archive.ubuntu.com/ubuntu/ trusty/main libthai0 amd64 0.1.20-3 [16.9 kB] | |
| ==> default: Get:41 http://archive.ubuntu.com/ubuntu/ trusty-updates/main fontconfig amd64 2.11.0-0ubuntu4.1 [176 kB] | |
| ==> default: Get:42 http://archive.ubuntu.com/ubuntu/ trusty/main libpango-1.0-0 amd64 1.36.3-1ubuntu1 [149 kB] | |
| ==> default: Get:43 http://archive.ubuntu.com/ubuntu/ trusty/main libharfbuzz0b amd64 0.9.27-1 [126 kB] | |
| ==> default: Get:44 http://archive.ubuntu.com/ubuntu/ trusty/main libpangoft2-1.0-0 amd64 1.36.3-1ubuntu1 [32.6 kB] | |
| ==> default: Get:45 http://archive.ubuntu.com/ubuntu/ trusty/main libpangocairo-1.0-0 amd64 1.36.3-1ubuntu1 [19.9 kB] | |
| ==> default: Get:46 http://archive.ubuntu.com/ubuntu/ trusty/main libxcursor1 amd64 1:1.1.14-1 [22.8 kB] | |
| ==> default: Get:47 http://archive.ubuntu.com/ubuntu/ trusty/main libxi6 amd64 2:1.7.1.901-1ubuntu1 [31.9 kB] | |
| ==> default: Get:48 http://archive.ubuntu.com/ubuntu/ trusty/main libxinerama1 amd64 2:1.1.3-1 [7,908 B] | |
| ==> default: Get:49 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libgtk2.0-0 amd64 2.24.23-0ubuntu1.1 [1,733 kB] | |
| ==> default: Get:50 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libkadm5clnt-mit9 amd64 1.12+dfsg-2ubuntu4.2 [36.2 kB] | |
| ==> default: Get:51 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libkdb5-7 amd64 1.12+dfsg-2ubuntu4.2 [36.2 kB] | |
| ==> default: Get:52 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libkadm5srv-mit9 amd64 1.12+dfsg-2ubuntu4.2 [50.3 kB] | |
| ==> default: Get:53 http://archive.ubuntu.com/ubuntu/ trusty/main libltdl7 amd64 2.4.2-1.7ubuntu1 [35.0 kB] | |
| ==> default: Get:54 http://archive.ubuntu.com/ubuntu/ trusty-updates/main mysql-common all 5.5.38-0ubuntu0.14.04.1 [14.1 kB] | |
| ==> default: Get:55 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libmysqlclient18 amd64 5.5.38-0ubuntu0.14.04.1 [594 kB] | |
| ==> default: Get:56 http://archive.ubuntu.com/ubuntu/ trusty/main libpcrecpp0 amd64 1:8.31-2ubuntu2 [14.5 kB] | |
| ==> default: Get:57 http://archive.ubuntu.com/ubuntu/ trusty/main libtcl8.6 amd64 8.6.1-4ubuntu1 [841 kB] | |
| ==> default: Get:58 http://archive.ubuntu.com/ubuntu/ trusty/main libxft2 amd64 2.3.1-2 [36.2 kB] | |
| ==> default: Get:59 http://archive.ubuntu.com/ubuntu/ trusty/main libxss1 amd64 1:1.2.2-1 [8,582 B] | |
| ==> default: Get:60 http://archive.ubuntu.com/ubuntu/ trusty/main libtk8.6 amd64 8.6.1-3ubuntu2 [689 kB] | |
| ==> default: Get:61 http://archive.ubuntu.com/ubuntu/ trusty/universe libwxbase2.8-0 amd64 2.8.12.1+dfsg-2ubuntu2 [460 kB] | |
| ==> default: Get:62 http://archive.ubuntu.com/ubuntu/ trusty/universe libwxgtk2.8-0 amd64 2.8.12.1+dfsg-2ubuntu2 [2,371 kB] | |
| ==> default: Get:63 http://archive.ubuntu.com/ubuntu/ trusty/main libxcb-shape0 amd64 1.10-2ubuntu1 [5,654 B] | |
| ==> default: Get:64 http://archive.ubuntu.com/ubuntu/ trusty/main libxslt1.1 amd64 1.1.28-2build1 [145 kB] | |
| ==> default: Get:65 http://archive.ubuntu.com/ubuntu/ trusty/main libxtst6 amd64 2:1.2.2-1 [14.1 kB] | |
| ==> default: Get:66 http://archive.ubuntu.com/ubuntu/ trusty/main libxv1 amd64 2:1.0.10-1 [10.3 kB] | |
| ==> default: Get:67 http://archive.ubuntu.com/ubuntu/ trusty/main libxxf86dga1 amd64 2:1.1.4-1 [13.7 kB] | |
| ==> default: Get:68 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libgnutlsxx27 amd64 2.12.23-12ubuntu2.1 [17.3 kB] | |
| ==> default: Get:69 http://archive.ubuntu.com/ubuntu/ trusty/main m4 amd64 1.4.17-2ubuntu1 [195 kB] | |
| ==> default: Get:70 http://archive.ubuntu.com/ubuntu/ trusty/main autoconf all 2.69-6 [322 kB] | |
| ==> default: Get:71 http://archive.ubuntu.com/ubuntu/ trusty/main autotools-dev all 20130810.1 [44.3 kB] | |
| ==> default: Get:72 http://archive.ubuntu.com/ubuntu/ trusty/main automake all 1:1.14.1-2ubuntu1 [510 kB] | |
| ==> default: Get:73 http://archive.ubuntu.com/ubuntu/ trusty/main libbison-dev amd64 2:3.0.2.dfsg-2 [338 kB] | |
| ==> default: Get:74 http://archive.ubuntu.com/ubuntu/ trusty/main bison amd64 2:3.0.2.dfsg-2 [257 kB] | |
| ==> default: Get:75 http://archive.ubuntu.com/ubuntu/ trusty/main libregexp-common-perl all 2013031301-1 [167 kB] | |
| ==> default: Get:76 http://archive.ubuntu.com/ubuntu/ trusty/universe cloc all 1.60-1 [83.1 kB] | |
| ==> default: Get:77 http://archive.ubuntu.com/ubuntu/ trusty/main cmake-data all 2.8.12.2-0ubuntu3 [676 kB] | |
| ==> default: Get:78 http://archive.ubuntu.com/ubuntu/ trusty/main cmake amd64 2.8.12.2-0ubuntu3 [2,618 kB] | |
| ==> default: Get:79 http://archive.ubuntu.com/ubuntu/ trusty/universe dstat all 0.7.2-3build1 [68.2 kB] | |
| ==> default: Get:80 http://archive.ubuntu.com/ubuntu/ trusty-updates/main gettext amd64 0.18.3.1-1ubuntu3 [829 kB] | |
| ==> default: Get:81 http://archive.ubuntu.com/ubuntu/ trusty/main git-core all 1:1.9.1-1 [1,452 B] | |
| ==> default: Get:82 http://archive.ubuntu.com/ubuntu/ trusty/main hicolor-icon-theme all 0.13-1 [7,140 B] | |
| ==> default: Get:83 http://archive.ubuntu.com/ubuntu/ trusty/universe htop amd64 1.0.2-3 [68.0 kB] | |
| ==> default: Get:84 http://archive.ubuntu.com/ubuntu/ trusty/main icu-devtools amd64 52.1-3 [163 kB] | |
| ==> default: Get:85 http://archive.ubuntu.com/ubuntu/ trusty/main comerr-dev amd64 2.1-1.42.9-3ubuntu1 [38.3 kB] | |
| ==> default: Get:86 http://archive.ubuntu.com/ubuntu/ trusty-updates/main krb5-multidev amd64 1.12+dfsg-2ubuntu4.2 [111 kB] | |
| ==> default: Get:87 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libasprintf-dev amd64 0.18.3.1-1ubuntu3 [4,438 B] | |
| ==> default: Get:88 http://archive.ubuntu.com/ubuntu/ trusty/main libbz2-dev amd64 1.0.6-5 [33.2 kB] | |
| ==> default: Get:89 http://archive.ubuntu.com/ubuntu/ trusty/main pkg-config amd64 0.26-1ubuntu4 [40.9 kB] | |
| ==> default: Get:90 http://archive.ubuntu.com/ubuntu/ trusty/main libidn11-dev amd64 1.28-1ubuntu2 [517 kB] | |
| ==> default: Get:91 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libkrb5-dev amd64 1.12+dfsg-2ubuntu4.2 [14.4 kB] | |
| ==> default: Get:92 http://archive.ubuntu.com/ubuntu/ trusty/main libldap2-dev amd64 2.4.31-1+nmu2ubuntu8 [259 kB] | |
| ==> default: Get:93 http://archive.ubuntu.com/ubuntu/ trusty/main libgpg-error-dev amd64 1.12-0.2ubuntu1 [20.1 kB] | |
| ==> default: Get:94 http://archive.ubuntu.com/ubuntu/ trusty/main libgcrypt11-dev amd64 1.5.3-2ubuntu4 [273 kB] | |
| ==> default: Get:95 http://archive.ubuntu.com/ubuntu/ trusty/main zlib1g-dev amd64 1:1.2.8.dfsg-1ubuntu1 [183 kB] | |
| ==> default: Get:96 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libtasn1-6-dev amd64 3.4-3ubuntu0.1 [384 kB] | |
| ==> default: Get:97 http://archive.ubuntu.com/ubuntu/ trusty/main libp11-kit-dev amd64 0.20.2-2ubuntu2 [56.4 kB] | |
| ==> default: Get:98 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libgnutls-dev amd64 2.12.23-12ubuntu2.1 [371 kB] | |
| ==> default: Get:99 http://archive.ubuntu.com/ubuntu/ trusty/main librtmp-dev amd64 2.4+20121230.gitdf6c518-1 [67.1 kB] | |
| ==> default: Get:100 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libssl-dev amd64 1.0.1f-1ubuntu2.5 [1,067 kB] | |
| ==> default: Get:101 http://archive.ubuntu.com/ubuntu/ trusty/main libcurl4-openssl-dev amd64 7.35.0-1ubuntu2 [243 kB] | |
| ==> default: Get:102 http://archive.ubuntu.com/ubuntu/ trusty/main libevent-dev amd64 2.0.21-stable-1ubuntu1 [259 kB] | |
| ==> default: Get:103 http://archive.ubuntu.com/ubuntu/ trusty/main libgdbm-dev amd64 1.8.3-12build1 [24.9 kB] | |
| ==> default: Get:104 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libgettextpo-dev amd64 0.18.3.1-1ubuntu3 [122 kB] | |
| ==> default: Get:105 http://archive.ubuntu.com/ubuntu/ trusty/main libgmp-dev amd64 2:5.1.3+dfsg-1ubuntu1 [292 kB] | |
| ==> default: Get:106 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libgtk2.0-bin amd64 2.24.23-0ubuntu1.1 [9,738 B] | |
| ==> default: Get:107 http://archive.ubuntu.com/ubuntu/ trusty/main libicu-dev amd64 52.1-3 [7,582 kB] | |
| ==> default: Get:108 http://archive.ubuntu.com/ubuntu/ trusty/main libltdl-dev amd64 2.4.2-1.7ubuntu1 [157 kB] | |
| ==> default: Get:109 http://archive.ubuntu.com/ubuntu/ trusty/universe libmcrypt4 amd64 2.5.8-3.1ubuntu1 [61.9 kB] | |
| ==> default: Get:110 http://archive.ubuntu.com/ubuntu/ trusty/universe libmcrypt-dev amd64 2.5.8-3.1ubuntu1 [83.1 kB] | |
| ==> default: Get:111 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libmysqlclient-dev amd64 5.5.38-0ubuntu0.14.04.1 [861 kB] | |
| ==> default: Get:112 http://archive.ubuntu.com/ubuntu/ trusty/main libtinfo-dev amd64 5.9+20140118-1ubuntu1 [76.3 kB] | |
| ==> default: Get:113 http://archive.ubuntu.com/ubuntu/ trusty/main libncurses5-dev amd64 5.9+20140118-1ubuntu1 [170 kB] | |
| ==> default: Get:114 http://archive.ubuntu.com/ubuntu/ trusty/main libpcre3-dev amd64 1:8.31-2ubuntu2 [237 kB] | |
| ==> default: Get:115 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libpq5 amd64 9.3.5-0ubuntu0.14.04.1 [80.6 kB] | |
| ==> default: Get:116 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libpq-dev amd64 9.3.5-0ubuntu0.14.04.1 [140 kB] | |
| ==> default: Get:117 http://archive.ubuntu.com/ubuntu/ trusty/main libreadline6-dev amd64 6.3-4ubuntu2 [213 kB] | |
| ==> default: Get:118 http://archive.ubuntu.com/ubuntu/ trusty/main libsqlite3-dev amd64 3.8.2-1ubuntu2 [439 kB] | |
| ==> default: Get:119 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libssl-doc all 1.0.1f-1ubuntu2.5 [966 kB] | |
| ==> default: Get:120 http://archive.ubuntu.com/ubuntu/ trusty/main libtool amd64 2.4.2-1.7ubuntu1 [188 kB] | |
| ==> default: Get:121 http://archive.ubuntu.com/ubuntu/ trusty/main libutempter0 amd64 1.1.5-4build1 [8,366 B] | |
| ==> default: Get:122 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libxml2-dev amd64 2.9.1+dfsg1-3ubuntu4.3 [630 kB] | |
| ==> default: Get:123 http://archive.ubuntu.com/ubuntu/ trusty/main libxslt1-dev amd64 1.1.28-2build1 [407 kB] | |
| ==> default: Get:124 http://archive.ubuntu.com/ubuntu/ trusty/universe mercurial-common all 2.8.2-1ubuntu1 [1,517 kB] | |
| ==> default: Get:125 http://archive.ubuntu.com/ubuntu/ trusty/universe mercurial amd64 2.8.2-1ubuntu1 [40.8 kB] | |
| ==> default: Get:126 http://archive.ubuntu.com/ubuntu/ trusty/universe mlton-basis all 20100608-5.1 [2,054 kB] | |
| ==> default: Get:127 http://archive.ubuntu.com/ubuntu/ trusty/universe mlton-runtime-x86-64-linux-gnu amd64 20100608-5.1 [469 kB] | |
| ==> default: Get:128 http://archive.ubuntu.com/ubuntu/ trusty/universe mlton-runtime-native amd64 20100608-5.1 [3,028 B] | |
| ==> default: Get:129 http://archive.ubuntu.com/ubuntu/ trusty/universe mlton-compiler amd64 20100608-5.1 [4,521 kB] | |
| ==> default: Get:130 http://archive.ubuntu.com/ubuntu/ trusty/universe mlton-tools amd64 20100608-5.1 [1,564 kB] | |
| ==> default: Get:131 http://archive.ubuntu.com/ubuntu/ trusty/universe mlton-doc all 20100608-5.1 [3,491 kB] | |
| ==> default: Get:132 http://archive.ubuntu.com/ubuntu/ trusty/universe mlton all 20100608-5.1 [3,894 B] | |
| ==> default: Get:133 http://archive.ubuntu.com/ubuntu/ trusty-updates/universe python-software-properties all 0.92.37.1 [19.6 kB] | |
| ==> default: Get:134 http://archive.ubuntu.com/ubuntu/ trusty/main sqlite3 amd64 3.8.2-1ubuntu2 [28.9 kB] | |
| ==> default: Get:135 http://archive.ubuntu.com/ubuntu/ trusty/main tcl8.6 amd64 8.6.1-4ubuntu1 [14.2 kB] | |
| ==> default: Get:136 http://archive.ubuntu.com/ubuntu/ trusty/main tcl amd64 8.6.0+6ubuntu3 [4,900 B] | |
| ==> default: Get:137 http://archive.ubuntu.com/ubuntu/ trusty/main tk8.6 amd64 8.6.1-3ubuntu2 [12.1 kB] | |
| ==> default: Get:138 http://archive.ubuntu.com/ubuntu/ trusty/main tk amd64 8.6.0+6ubuntu3 [3,192 B] | |
| ==> default: Get:139 http://archive.ubuntu.com/ubuntu/ trusty/main unzip amd64 6.0-9ubuntu1 [193 kB] | |
| ==> default: Get:140 http://archive.ubuntu.com/ubuntu/ trusty/main x11-utils amd64 7.7+1 [230 kB] | |
| ==> default: Get:141 http://archive.ubuntu.com/ubuntu/ trusty/main xbitmaps all 1.1.1-2 [28.1 kB] | |
| ==> default: Get:142 http://archive.ubuntu.com/ubuntu/ trusty/main xterm amd64 297-1ubuntu1 [665 kB] | |
| ==> default: Get:143 http://archive.ubuntu.com/ubuntu/ trusty/main libffi-dev amd64 3.1~rc1+r3.0.13-12 [99.8 kB] | |
| ==> default: Get:144 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libjson-c-dev amd64 0.11-3ubuntu1.2 [30.2 kB] | |
| ==> default: Get:145 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libjson0-dev amd64 0.11-3ubuntu1.2 [1,204 B] | |
| ==> default: Get:146 http://archive.ubuntu.com/ubuntu/ trusty/main libyaml-dev amd64 0.1.4-3ubuntu3 [56.0 kB] | |
| ==> default: debconf: unable to initialize frontend: Dialog | |
| ==> default: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) | |
| ==> default: debconf: falling back to frontend: Readline | |
| ==> default: debconf: unable to initialize frontend: Readline | |
| ==> default: debconf: (This frontend requires a controlling tty.) | |
| ==> default: debconf: falling back to frontend: Teletype | |
| ==> default: dpkg-preconfigure: unable to re-open stdin: | |
| ==> default: Fetched 55.5 MB in 1min 7s (821 kB/s) | |
| ==> default: Selecting previously unselected package liblzo2-2:amd64. | |
| ==> default: (Reading database ... 63104 files and directories currently installed.) | |
| ==> default: Preparing to unpack .../liblzo2-2_2.06-1.2ubuntu1.1_amd64.deb ... | |
| ==> default: Unpacking liblzo2-2:amd64 (2.06-1.2ubuntu1.1) ... | |
| ==> default: Selecting previously unselected package libnettle4:amd64. | |
| ==> default: Preparing to unpack .../libnettle4_2.7.1-1_amd64.deb ... | |
| ==> default: Unpacking libnettle4:amd64 (2.7.1-1) ... | |
| ==> default: Selecting previously unselected package libarchive13:amd64. | |
| ==> default: Preparing to unpack .../libarchive13_3.1.2-7ubuntu2_amd64.deb ... | |
| ==> default: Unpacking libarchive13:amd64 (3.1.2-7ubuntu2) ... | |
| ==> default: Selecting previously unselected package libatk1.0-data. | |
| ==> default: Preparing to unpack .../libatk1.0-data_2.10.0-2ubuntu2_all.deb ... | |
| ==> default: Unpacking libatk1.0-data (2.10.0-2ubuntu2) ... | |
| ==> default: Selecting previously unselected package libatk1.0-0:amd64. | |
| ==> default: Preparing to unpack .../libatk1.0-0_2.10.0-2ubuntu2_amd64.deb ... | |
| ==> default: Unpacking libatk1.0-0:amd64 (2.10.0-2ubuntu2) ... | |
| ==> default: Selecting previously unselected package libavahi-common-data:amd64. | |
| ==> default: Preparing to unpack .../libavahi-common-data_0.6.31-4ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libavahi-common-data:amd64 (0.6.31-4ubuntu1) ... | |
| ==> default: Selecting previously unselected package libavahi-common3:amd64. | |
| ==> default: Preparing to unpack .../libavahi-common3_0.6.31-4ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libavahi-common3:amd64 (0.6.31-4ubuntu1) ... | |
| ==> default: Selecting previously unselected package libavahi-client3:amd64. | |
| ==> default: Preparing to unpack .../libavahi-client3_0.6.31-4ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libavahi-client3:amd64 (0.6.31-4ubuntu1) ... | |
| ==> default: Selecting previously unselected package fonts-dejavu-core. | |
| ==> default: Preparing to unpack .../fonts-dejavu-core_2.34-1ubuntu1_all.deb ... | |
| ==> default: Unpacking fonts-dejavu-core (2.34-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package fontconfig-config. | |
| ==> default: Preparing to unpack .../fontconfig-config_2.11.0-0ubuntu4.1_all.deb ... | |
| ==> default: Unpacking fontconfig-config (2.11.0-0ubuntu4.1) ... | |
| ==> default: Selecting previously unselected package libfontconfig1:amd64. | |
| ==> default: Preparing to unpack .../libfontconfig1_2.11.0-0ubuntu4.1_amd64.deb ... | |
| ==> default: Unpacking libfontconfig1:amd64 (2.11.0-0ubuntu4.1) ... | |
| ==> default: Selecting previously unselected package libxcb-render0:amd64. | |
| ==> default: Preparing to unpack .../libxcb-render0_1.10-2ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libxcb-render0:amd64 (1.10-2ubuntu1) ... | |
| ==> default: Selecting previously unselected package libxcb-shm0:amd64. | |
| ==> default: Preparing to unpack .../libxcb-shm0_1.10-2ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libxcb-shm0:amd64 (1.10-2ubuntu1) ... | |
| ==> default: Selecting previously unselected package libcairo2:amd64. | |
| ==> default: Preparing to unpack .../libcairo2_1.13.0~20140204-0ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libcairo2:amd64 (1.13.0~20140204-0ubuntu1) ... | |
| ==> default: Selecting previously unselected package libcroco3:amd64. | |
| ==> default: Preparing to unpack .../libcroco3_0.6.8-2ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libcroco3:amd64 (0.6.8-2ubuntu1) ... | |
| ==> default: Selecting previously unselected package libcups2:amd64. | |
| ==> default: Preparing to unpack .../libcups2_1.7.2-0ubuntu1.1_amd64.deb ... | |
| ==> default: Unpacking libcups2:amd64 (1.7.2-0ubuntu1.1) ... | |
| ==> default: Selecting previously unselected package libdatrie1:amd64. | |
| ==> default: Preparing to unpack .../libdatrie1_0.2.8-1_amd64.deb ... | |
| ==> default: Unpacking libdatrie1:amd64 (0.2.8-1) ... | |
| ==> default: Selecting previously unselected package libevent-core-2.0-5:amd64. | |
| ==> default: Preparing to unpack .../libevent-core-2.0-5_2.0.21-stable-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libevent-core-2.0-5:amd64 (2.0.21-stable-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libevent-extra-2.0-5:amd64. | |
| ==> default: Preparing to unpack .../libevent-extra-2.0-5_2.0.21-stable-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libevent-extra-2.0-5:amd64 (2.0.21-stable-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libevent-openssl-2.0-5:amd64. | |
| ==> default: Preparing to unpack .../libevent-openssl-2.0-5_2.0.21-stable-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libevent-openssl-2.0-5:amd64 (2.0.21-stable-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libevent-pthreads-2.0-5:amd64. | |
| ==> default: Preparing to unpack .../libevent-pthreads-2.0-5_2.0.21-stable-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libevent-pthreads-2.0-5:amd64 (2.0.21-stable-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libjpeg-turbo8:amd64. | |
| ==> default: Preparing to unpack .../libjpeg-turbo8_1.3.0-0ubuntu2_amd64.deb ... | |
| ==> default: Unpacking libjpeg-turbo8:amd64 (1.3.0-0ubuntu2) ... | |
| ==> default: Selecting previously unselected package libjpeg8:amd64. | |
| ==> default: Preparing to unpack .../libjpeg8_8c-2ubuntu8_amd64.deb ... | |
| ==> default: Unpacking libjpeg8:amd64 (8c-2ubuntu8) ... | |
| ==> default: Selecting previously unselected package libjasper1:amd64. | |
| ==> default: Preparing to unpack .../libjasper1_1.900.1-14ubuntu3_amd64.deb ... | |
| ==> default: Unpacking libjasper1:amd64 (1.900.1-14ubuntu3) ... | |
| ==> default: Selecting previously unselected package libjbig0:amd64. | |
| ==> default: Preparing to unpack .../libjbig0_2.0-2ubuntu4.1_amd64.deb ... | |
| ==> default: Unpacking libjbig0:amd64 (2.0-2ubuntu4.1) ... | |
| ==> default: Selecting previously unselected package libtiff5:amd64. | |
| ==> default: Preparing to unpack .../libtiff5_4.0.3-7ubuntu0.1_amd64.deb ... | |
| ==> default: Unpacking libtiff5:amd64 (4.0.3-7ubuntu0.1) ... | |
| ==> default: Selecting previously unselected package libgdk-pixbuf2.0-common. | |
| ==> default: Preparing to unpack .../libgdk-pixbuf2.0-common_2.30.7-0ubuntu1_all.deb ... | |
| ==> default: Unpacking libgdk-pixbuf2.0-common (2.30.7-0ubuntu1) ... | |
| ==> default: Selecting previously unselected package libgdk-pixbuf2.0-0:amd64. | |
| ==> default: Preparing to unpack .../libgdk-pixbuf2.0-0_2.30.7-0ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libgdk-pixbuf2.0-0:amd64 (2.30.7-0ubuntu1) ... | |
| ==> default: Selecting previously unselected package libunistring0:amd64. | |
| ==> default: Preparing to unpack .../libunistring0_0.9.3-5ubuntu3_amd64.deb ... | |
| ==> default: Unpacking libunistring0:amd64 (0.9.3-5ubuntu3) ... | |
| ==> default: Selecting previously unselected package libgettextpo0:amd64. | |
| ==> default: Preparing to unpack .../libgettextpo0_0.18.3.1-1ubuntu3_amd64.deb ... | |
| ==> default: Unpacking libgettextpo0:amd64 (0.18.3.1-1ubuntu3) ... | |
| ==> default: Selecting previously unselected package libgmpxx4ldbl:amd64. | |
| ==> default: Preparing to unpack .../libgmpxx4ldbl_2%3a5.1.3+dfsg-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libgmpxx4ldbl:amd64 (2:5.1.3+dfsg-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libgraphite2-3:amd64. | |
| ==> default: Preparing to unpack .../libgraphite2-3_1.2.4-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libgraphite2-3:amd64 (1.2.4-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libgssrpc4:amd64. | |
| ==> default: Preparing to unpack .../libgssrpc4_1.12+dfsg-2ubuntu4.2_amd64.deb ... | |
| ==> default: Unpacking libgssrpc4:amd64 (1.12+dfsg-2ubuntu4.2) ... | |
| ==> default: Selecting previously unselected package libgstreamer0.10-0:amd64. | |
| ==> default: Preparing to unpack .../libgstreamer0.10-0_0.10.36-1.2ubuntu3_amd64.deb ... | |
| ==> default: Unpacking libgstreamer0.10-0:amd64 (0.10.36-1.2ubuntu3) ... | |
| ==> default: Selecting previously unselected package liborc-0.4-0:amd64. | |
| ==> default: Preparing to unpack .../liborc-0.4-0_1%3a0.4.18-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking liborc-0.4-0:amd64 (1:0.4.18-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libgstreamer-plugins-base0.10-0:amd64. | |
| ==> default: Preparing to unpack .../libgstreamer-plugins-base0.10-0_0.10.36-1.1ubuntu2_amd64.deb ... | |
| ==> default: Unpacking libgstreamer-plugins-base0.10-0:amd64 (0.10.36-1.1ubuntu2) ... | |
| ==> default: Selecting previously unselected package libgtk2.0-common. | |
| ==> default: Preparing to unpack .../libgtk2.0-common_2.24.23-0ubuntu1.1_all.deb ... | |
| ==> default: Unpacking libgtk2.0-common (2.24.23-0ubuntu1.1) ... | |
| ==> default: Selecting previously unselected package libthai-data. | |
| ==> default: Preparing to unpack .../libthai-data_0.1.20-3_all.deb ... | |
| ==> default: Unpacking libthai-data (0.1.20-3) ... | |
| ==> default: Selecting previously unselected package libthai0:amd64. | |
| ==> default: Preparing to unpack .../libthai0_0.1.20-3_amd64.deb ... | |
| ==> default: Unpacking libthai0:amd64 (0.1.20-3) ... | |
| ==> default: Selecting previously unselected package fontconfig. | |
| ==> default: Preparing to unpack .../fontconfig_2.11.0-0ubuntu4.1_amd64.deb ... | |
| ==> default: Unpacking fontconfig (2.11.0-0ubuntu4.1) ... | |
| ==> default: Selecting previously unselected package libpango-1.0-0:amd64. | |
| ==> default: Preparing to unpack .../libpango-1.0-0_1.36.3-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libpango-1.0-0:amd64 (1.36.3-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libharfbuzz0b:amd64. | |
| ==> default: Preparing to unpack .../libharfbuzz0b_0.9.27-1_amd64.deb ... | |
| ==> default: Unpacking libharfbuzz0b:amd64 (0.9.27-1) ... | |
| ==> default: Selecting previously unselected package libpangoft2-1.0-0:amd64. | |
| ==> default: Preparing to unpack .../libpangoft2-1.0-0_1.36.3-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libpangoft2-1.0-0:amd64 (1.36.3-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libpangocairo-1.0-0:amd64. | |
| ==> default: Preparing to unpack .../libpangocairo-1.0-0_1.36.3-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libpangocairo-1.0-0:amd64 (1.36.3-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libxcursor1:amd64. | |
| ==> default: Preparing to unpack .../libxcursor1_1%3a1.1.14-1_amd64.deb ... | |
| ==> default: Unpacking libxcursor1:amd64 (1:1.1.14-1) ... | |
| ==> default: Selecting previously unselected package libxi6:amd64. | |
| ==> default: Preparing to unpack .../libxi6_2%3a1.7.1.901-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libxi6:amd64 (2:1.7.1.901-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libxinerama1:amd64. | |
| ==> default: Preparing to unpack .../libxinerama1_2%3a1.1.3-1_amd64.deb ... | |
| ==> default: Unpacking libxinerama1:amd64 (2:1.1.3-1) ... | |
| ==> default: Selecting previously unselected package libgtk2.0-0:amd64. | |
| ==> default: Preparing to unpack .../libgtk2.0-0_2.24.23-0ubuntu1.1_amd64.deb ... | |
| ==> default: Unpacking libgtk2.0-0:amd64 (2.24.23-0ubuntu1.1) ... | |
| ==> default: Selecting previously unselected package libkadm5clnt-mit9:amd64. | |
| ==> default: Preparing to unpack .../libkadm5clnt-mit9_1.12+dfsg-2ubuntu4.2_amd64.deb ... | |
| ==> default: Unpacking libkadm5clnt-mit9:amd64 (1.12+dfsg-2ubuntu4.2) ... | |
| ==> default: Selecting previously unselected package libkdb5-7:amd64. | |
| ==> default: Preparing to unpack .../libkdb5-7_1.12+dfsg-2ubuntu4.2_amd64.deb ... | |
| ==> default: Unpacking libkdb5-7:amd64 (1.12+dfsg-2ubuntu4.2) ... | |
| ==> default: Selecting previously unselected package libkadm5srv-mit9:amd64. | |
| ==> default: Preparing to unpack .../libkadm5srv-mit9_1.12+dfsg-2ubuntu4.2_amd64.deb ... | |
| ==> default: Unpacking libkadm5srv-mit9:amd64 (1.12+dfsg-2ubuntu4.2) ... | |
| ==> default: Selecting previously unselected package libltdl7:amd64. | |
| ==> default: Preparing to unpack .../libltdl7_2.4.2-1.7ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libltdl7:amd64 (2.4.2-1.7ubuntu1) ... | |
| ==> default: Selecting previously unselected package mysql-common. | |
| ==> default: Preparing to unpack .../mysql-common_5.5.38-0ubuntu0.14.04.1_all.deb ... | |
| ==> default: Unpacking mysql-common (5.5.38-0ubuntu0.14.04.1) ... | |
| ==> default: Selecting previously unselected package libmysqlclient18:amd64. | |
| ==> default: Preparing to unpack .../libmysqlclient18_5.5.38-0ubuntu0.14.04.1_amd64.deb ... | |
| ==> default: Unpacking libmysqlclient18:amd64 (5.5.38-0ubuntu0.14.04.1) ... | |
| ==> default: Selecting previously unselected package libpcrecpp0:amd64. | |
| ==> default: Preparing to unpack .../libpcrecpp0_1%3a8.31-2ubuntu2_amd64.deb ... | |
| ==> default: Unpacking libpcrecpp0:amd64 (1:8.31-2ubuntu2) ... | |
| ==> default: Selecting previously unselected package libtcl8.6:amd64. | |
| ==> default: Preparing to unpack .../libtcl8.6_8.6.1-4ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libtcl8.6:amd64 (8.6.1-4ubuntu1) ... | |
| ==> default: Selecting previously unselected package libxft2:amd64. | |
| ==> default: Preparing to unpack .../libxft2_2.3.1-2_amd64.deb ... | |
| ==> default: Unpacking libxft2:amd64 (2.3.1-2) ... | |
| ==> default: Selecting previously unselected package libxss1:amd64. | |
| ==> default: Preparing to unpack .../libxss1_1%3a1.2.2-1_amd64.deb ... | |
| ==> default: Unpacking libxss1:amd64 (1:1.2.2-1) ... | |
| ==> default: Selecting previously unselected package libtk8.6:amd64. | |
| ==> default: Preparing to unpack .../libtk8.6_8.6.1-3ubuntu2_amd64.deb ... | |
| ==> default: Unpacking libtk8.6:amd64 (8.6.1-3ubuntu2) ... | |
| ==> default: Selecting previously unselected package libwxbase2.8-0:amd64. | |
| ==> default: Preparing to unpack .../libwxbase2.8-0_2.8.12.1+dfsg-2ubuntu2_amd64.deb ... | |
| ==> default: Unpacking libwxbase2.8-0:amd64 (2.8.12.1+dfsg-2ubuntu2) ... | |
| ==> default: Selecting previously unselected package libwxgtk2.8-0:amd64. | |
| ==> default: Preparing to unpack .../libwxgtk2.8-0_2.8.12.1+dfsg-2ubuntu2_amd64.deb ... | |
| ==> default: Unpacking libwxgtk2.8-0:amd64 (2.8.12.1+dfsg-2ubuntu2) ... | |
| ==> default: Selecting previously unselected package libxcb-shape0:amd64. | |
| ==> default: Preparing to unpack .../libxcb-shape0_1.10-2ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libxcb-shape0:amd64 (1.10-2ubuntu1) ... | |
| ==> default: Selecting previously unselected package libxslt1.1:amd64. | |
| ==> default: Preparing to unpack .../libxslt1.1_1.1.28-2build1_amd64.deb ... | |
| ==> default: Unpacking libxslt1.1:amd64 (1.1.28-2build1) ... | |
| ==> default: Selecting previously unselected package libxtst6:amd64. | |
| ==> default: Preparing to unpack .../libxtst6_2%3a1.2.2-1_amd64.deb ... | |
| ==> default: Unpacking libxtst6:amd64 (2:1.2.2-1) ... | |
| ==> default: Selecting previously unselected package libxv1:amd64. | |
| ==> default: Preparing to unpack .../libxv1_2%3a1.0.10-1_amd64.deb ... | |
| ==> default: Unpacking libxv1:amd64 (2:1.0.10-1) ... | |
| ==> default: Selecting previously unselected package libxxf86dga1:amd64. | |
| ==> default: Preparing to unpack .../libxxf86dga1_2%3a1.1.4-1_amd64.deb ... | |
| ==> default: Unpacking libxxf86dga1:amd64 (2:1.1.4-1) ... | |
| ==> default: Selecting previously unselected package libgnutlsxx27:amd64. | |
| ==> default: Preparing to unpack .../libgnutlsxx27_2.12.23-12ubuntu2.1_amd64.deb ... | |
| ==> default: Unpacking libgnutlsxx27:amd64 (2.12.23-12ubuntu2.1) ... | |
| ==> default: Selecting previously unselected package m4. | |
| ==> default: Preparing to unpack .../m4_1.4.17-2ubuntu1_amd64.deb ... | |
| ==> default: Unpacking m4 (1.4.17-2ubuntu1) ... | |
| ==> default: Selecting previously unselected package autoconf. | |
| ==> default: Preparing to unpack .../autoconf_2.69-6_all.deb ... | |
| ==> default: Unpacking autoconf (2.69-6) ... | |
| ==> default: Selecting previously unselected package autotools-dev. | |
| ==> default: Preparing to unpack .../autotools-dev_20130810.1_all.deb ... | |
| ==> default: Unpacking autotools-dev (20130810.1) ... | |
| ==> default: Selecting previously unselected package automake. | |
| ==> default: Preparing to unpack .../automake_1%3a1.14.1-2ubuntu1_all.deb ... | |
| ==> default: Unpacking automake (1:1.14.1-2ubuntu1) ... | |
| ==> default: Selecting previously unselected package libbison-dev:amd64. | |
| ==> default: Preparing to unpack .../libbison-dev_2%3a3.0.2.dfsg-2_amd64.deb ... | |
| ==> default: Unpacking libbison-dev:amd64 (2:3.0.2.dfsg-2) ... | |
| ==> default: Selecting previously unselected package bison. | |
| ==> default: Preparing to unpack .../bison_2%3a3.0.2.dfsg-2_amd64.deb ... | |
| ==> default: Unpacking bison (2:3.0.2.dfsg-2) ... | |
| ==> default: Selecting previously unselected package libregexp-common-perl. | |
| ==> default: Preparing to unpack .../libregexp-common-perl_2013031301-1_all.deb ... | |
| ==> default: Unpacking libregexp-common-perl (2013031301-1) ... | |
| ==> default: Selecting previously unselected package cloc. | |
| ==> default: Preparing to unpack .../archives/cloc_1.60-1_all.deb ... | |
| ==> default: Unpacking cloc (1.60-1) ... | |
| ==> default: Selecting previously unselected package cmake-data. | |
| ==> default: Preparing to unpack .../cmake-data_2.8.12.2-0ubuntu3_all.deb ... | |
| ==> default: Unpacking cmake-data (2.8.12.2-0ubuntu3) ... | |
| ==> default: Selecting previously unselected package cmake. | |
| ==> default: Preparing to unpack .../cmake_2.8.12.2-0ubuntu3_amd64.deb ... | |
| ==> default: Unpacking cmake (2.8.12.2-0ubuntu3) ... | |
| ==> default: Selecting previously unselected package dstat. | |
| ==> default: Preparing to unpack .../dstat_0.7.2-3build1_all.deb ... | |
| ==> default: Unpacking dstat (0.7.2-3build1) ... | |
| ==> default: Selecting previously unselected package gettext. | |
| ==> default: Preparing to unpack .../gettext_0.18.3.1-1ubuntu3_amd64.deb ... | |
| ==> default: Unpacking gettext (0.18.3.1-1ubuntu3) ... | |
| ==> default: Selecting previously unselected package git-core. | |
| ==> default: Preparing to unpack .../git-core_1%3a1.9.1-1_all.deb ... | |
| ==> default: Unpacking git-core (1:1.9.1-1) ... | |
| ==> default: Selecting previously unselected package hicolor-icon-theme. | |
| ==> default: Preparing to unpack .../hicolor-icon-theme_0.13-1_all.deb ... | |
| ==> default: Unpacking hicolor-icon-theme (0.13-1) ... | |
| ==> default: Selecting previously unselected package htop. | |
| ==> default: Preparing to unpack .../htop_1.0.2-3_amd64.deb ... | |
| ==> default: Unpacking htop (1.0.2-3) ... | |
| ==> default: Selecting previously unselected package icu-devtools. | |
| ==> default: Preparing to unpack .../icu-devtools_52.1-3_amd64.deb ... | |
| ==> default: Unpacking icu-devtools (52.1-3) ... | |
| ==> default: Selecting previously unselected package comerr-dev. | |
| ==> default: Preparing to unpack .../comerr-dev_2.1-1.42.9-3ubuntu1_amd64.deb ... | |
| ==> default: Unpacking comerr-dev (2.1-1.42.9-3ubuntu1) ... | |
| ==> default: Selecting previously unselected package krb5-multidev. | |
| ==> default: Preparing to unpack .../krb5-multidev_1.12+dfsg-2ubuntu4.2_amd64.deb ... | |
| ==> default: Unpacking krb5-multidev (1.12+dfsg-2ubuntu4.2) ... | |
| ==> default: Selecting previously unselected package libasprintf-dev:amd64. | |
| ==> default: Preparing to unpack .../libasprintf-dev_0.18.3.1-1ubuntu3_amd64.deb ... | |
| ==> default: Unpacking libasprintf-dev:amd64 (0.18.3.1-1ubuntu3) ... | |
| ==> default: Selecting previously unselected package libbz2-dev:amd64. | |
| ==> default: Preparing to unpack .../libbz2-dev_1.0.6-5_amd64.deb ... | |
| ==> default: Unpacking libbz2-dev:amd64 (1.0.6-5) ... | |
| ==> default: Selecting previously unselected package pkg-config. | |
| ==> default: Preparing to unpack .../pkg-config_0.26-1ubuntu4_amd64.deb ... | |
| ==> default: Unpacking pkg-config (0.26-1ubuntu4) ... | |
| ==> default: Selecting previously unselected package libidn11-dev. | |
| ==> default: Preparing to unpack .../libidn11-dev_1.28-1ubuntu2_amd64.deb ... | |
| ==> default: Unpacking libidn11-dev (1.28-1ubuntu2) ... | |
| ==> default: Selecting previously unselected package libkrb5-dev. | |
| ==> default: Preparing to unpack .../libkrb5-dev_1.12+dfsg-2ubuntu4.2_amd64.deb ... | |
| ==> default: Unpacking libkrb5-dev (1.12+dfsg-2ubuntu4.2) ... | |
| ==> default: Selecting previously unselected package libldap2-dev:amd64. | |
| ==> default: Preparing to unpack .../libldap2-dev_2.4.31-1+nmu2ubuntu8_amd64.deb ... | |
| ==> default: Unpacking libldap2-dev:amd64 (2.4.31-1+nmu2ubuntu8) ... | |
| ==> default: Selecting previously unselected package libgpg-error-dev. | |
| ==> default: Preparing to unpack .../libgpg-error-dev_1.12-0.2ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libgpg-error-dev (1.12-0.2ubuntu1) ... | |
| ==> default: Selecting previously unselected package libgcrypt11-dev. | |
| ==> default: Preparing to unpack .../libgcrypt11-dev_1.5.3-2ubuntu4_amd64.deb ... | |
| ==> default: Unpacking libgcrypt11-dev (1.5.3-2ubuntu4) ... | |
| ==> default: Selecting previously unselected package zlib1g-dev:amd64. | |
| ==> default: Preparing to unpack .../zlib1g-dev_1%3a1.2.8.dfsg-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking zlib1g-dev:amd64 (1:1.2.8.dfsg-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libtasn1-6-dev. | |
| ==> default: Preparing to unpack .../libtasn1-6-dev_3.4-3ubuntu0.1_amd64.deb ... | |
| ==> default: Unpacking libtasn1-6-dev (3.4-3ubuntu0.1) ... | |
| ==> default: Selecting previously unselected package libp11-kit-dev. | |
| ==> default: Preparing to unpack .../libp11-kit-dev_0.20.2-2ubuntu2_amd64.deb ... | |
| ==> default: Unpacking libp11-kit-dev (0.20.2-2ubuntu2) ... | |
| ==> default: Selecting previously unselected package libgnutls-dev. | |
| ==> default: Preparing to unpack .../libgnutls-dev_2.12.23-12ubuntu2.1_amd64.deb ... | |
| ==> default: Unpacking libgnutls-dev (2.12.23-12ubuntu2.1) ... | |
| ==> default: Selecting previously unselected package librtmp-dev. | |
| ==> default: Preparing to unpack .../librtmp-dev_2.4+20121230.gitdf6c518-1_amd64.deb ... | |
| ==> default: Unpacking librtmp-dev (2.4+20121230.gitdf6c518-1) ... | |
| ==> default: Selecting previously unselected package libssl-dev:amd64. | |
| ==> default: Preparing to unpack .../libssl-dev_1.0.1f-1ubuntu2.5_amd64.deb ... | |
| ==> default: Unpacking libssl-dev:amd64 (1.0.1f-1ubuntu2.5) ... | |
| ==> default: Selecting previously unselected package libcurl4-openssl-dev:amd64. | |
| ==> default: Preparing to unpack .../libcurl4-openssl-dev_7.35.0-1ubuntu2_amd64.deb ... | |
| ==> default: Unpacking libcurl4-openssl-dev:amd64 (7.35.0-1ubuntu2) ... | |
| ==> default: Selecting previously unselected package libevent-dev. | |
| ==> default: Preparing to unpack .../libevent-dev_2.0.21-stable-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libevent-dev (2.0.21-stable-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libgdbm-dev. | |
| ==> default: Preparing to unpack .../libgdbm-dev_1.8.3-12build1_amd64.deb ... | |
| ==> default: Unpacking libgdbm-dev (1.8.3-12build1) ... | |
| ==> default: Selecting previously unselected package libgettextpo-dev:amd64. | |
| ==> default: Preparing to unpack .../libgettextpo-dev_0.18.3.1-1ubuntu3_amd64.deb ... | |
| ==> default: Unpacking libgettextpo-dev:amd64 (0.18.3.1-1ubuntu3) ... | |
| ==> default: Selecting previously unselected package libgmp-dev:amd64. | |
| ==> default: Preparing to unpack .../libgmp-dev_2%3a5.1.3+dfsg-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libgmp-dev:amd64 (2:5.1.3+dfsg-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libgtk2.0-bin. | |
| ==> default: Preparing to unpack .../libgtk2.0-bin_2.24.23-0ubuntu1.1_amd64.deb ... | |
| ==> default: Unpacking libgtk2.0-bin (2.24.23-0ubuntu1.1) ... | |
| ==> default: Selecting previously unselected package libicu-dev:amd64. | |
| ==> default: Preparing to unpack .../libicu-dev_52.1-3_amd64.deb ... | |
| ==> default: Unpacking libicu-dev:amd64 (52.1-3) ... | |
| ==> default: Selecting previously unselected package libltdl-dev:amd64. | |
| ==> default: Preparing to unpack .../libltdl-dev_2.4.2-1.7ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libltdl-dev:amd64 (2.4.2-1.7ubuntu1) ... | |
| ==> default: Selecting previously unselected package libmcrypt4. | |
| ==> default: Preparing to unpack .../libmcrypt4_2.5.8-3.1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libmcrypt4 (2.5.8-3.1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libmcrypt-dev. | |
| ==> default: Preparing to unpack .../libmcrypt-dev_2.5.8-3.1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libmcrypt-dev (2.5.8-3.1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libmysqlclient-dev. | |
| ==> default: Preparing to unpack .../libmysqlclient-dev_5.5.38-0ubuntu0.14.04.1_amd64.deb ... | |
| ==> default: Unpacking libmysqlclient-dev (5.5.38-0ubuntu0.14.04.1) ... | |
| ==> default: Selecting previously unselected package libtinfo-dev:amd64. | |
| ==> default: Preparing to unpack .../libtinfo-dev_5.9+20140118-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libtinfo-dev:amd64 (5.9+20140118-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libncurses5-dev:amd64. | |
| ==> default: Preparing to unpack .../libncurses5-dev_5.9+20140118-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libncurses5-dev:amd64 (5.9+20140118-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libpcre3-dev:amd64. | |
| ==> default: Preparing to unpack .../libpcre3-dev_1%3a8.31-2ubuntu2_amd64.deb ... | |
| ==> default: Unpacking libpcre3-dev:amd64 (1:8.31-2ubuntu2) ... | |
| ==> default: Selecting previously unselected package libpq5. | |
| ==> default: Preparing to unpack .../libpq5_9.3.5-0ubuntu0.14.04.1_amd64.deb ... | |
| ==> default: Unpacking libpq5 (9.3.5-0ubuntu0.14.04.1) ... | |
| ==> default: Selecting previously unselected package libpq-dev. | |
| ==> default: Preparing to unpack .../libpq-dev_9.3.5-0ubuntu0.14.04.1_amd64.deb ... | |
| ==> default: Unpacking libpq-dev (9.3.5-0ubuntu0.14.04.1) ... | |
| ==> default: Selecting previously unselected package libreadline6-dev:amd64. | |
| ==> default: Preparing to unpack .../libreadline6-dev_6.3-4ubuntu2_amd64.deb ... | |
| ==> default: Unpacking libreadline6-dev:amd64 (6.3-4ubuntu2) ... | |
| ==> default: Selecting previously unselected package libsqlite3-dev:amd64. | |
| ==> default: Preparing to unpack .../libsqlite3-dev_3.8.2-1ubuntu2_amd64.deb ... | |
| ==> default: Unpacking libsqlite3-dev:amd64 (3.8.2-1ubuntu2) ... | |
| ==> default: Selecting previously unselected package libssl-doc. | |
| ==> default: Preparing to unpack .../libssl-doc_1.0.1f-1ubuntu2.5_all.deb ... | |
| ==> default: Unpacking libssl-doc (1.0.1f-1ubuntu2.5) ... | |
| ==> default: Selecting previously unselected package libtool. | |
| ==> default: Preparing to unpack .../libtool_2.4.2-1.7ubuntu1_amd64.deb ... | |
| ==> default: Unpacking libtool (2.4.2-1.7ubuntu1) ... | |
| ==> default: Selecting previously unselected package libutempter0. | |
| ==> default: Preparing to unpack .../libutempter0_1.1.5-4build1_amd64.deb ... | |
| ==> default: Unpacking libutempter0 (1.1.5-4build1) ... | |
| ==> default: Selecting previously unselected package libxml2-dev:amd64. | |
| ==> default: Preparing to unpack .../libxml2-dev_2.9.1+dfsg1-3ubuntu4.3_amd64.deb ... | |
| ==> default: Unpacking libxml2-dev:amd64 (2.9.1+dfsg1-3ubuntu4.3) ... | |
| ==> default: Selecting previously unselected package libxslt1-dev:amd64. | |
| ==> default: Preparing to unpack .../libxslt1-dev_1.1.28-2build1_amd64.deb ... | |
| ==> default: Unpacking libxslt1-dev:amd64 (1.1.28-2build1) ... | |
| ==> default: Selecting previously unselected package mercurial-common. | |
| ==> default: Preparing to unpack .../mercurial-common_2.8.2-1ubuntu1_all.deb ... | |
| ==> default: Unpacking mercurial-common (2.8.2-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package mercurial. | |
| ==> default: Preparing to unpack .../mercurial_2.8.2-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking mercurial (2.8.2-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package mlton-basis. | |
| ==> default: Preparing to unpack .../mlton-basis_20100608-5.1_all.deb ... | |
| ==> default: Unpacking mlton-basis (20100608-5.1) ... | |
| ==> default: Selecting previously unselected package mlton-runtime-x86-64-linux-gnu. | |
| ==> default: Preparing to unpack .../mlton-runtime-x86-64-linux-gnu_20100608-5.1_amd64.deb ... | |
| ==> default: Unpacking mlton-runtime-x86-64-linux-gnu (20100608-5.1) ... | |
| ==> default: Selecting previously unselected package mlton-runtime-native. | |
| ==> default: Preparing to unpack .../mlton-runtime-native_20100608-5.1_amd64.deb ... | |
| ==> default: Unpacking mlton-runtime-native (20100608-5.1) ... | |
| ==> default: Selecting previously unselected package mlton-compiler. | |
| ==> default: Preparing to unpack .../mlton-compiler_20100608-5.1_amd64.deb ... | |
| ==> default: Unpacking mlton-compiler (20100608-5.1) ... | |
| ==> default: Selecting previously unselected package mlton-tools. | |
| ==> default: Preparing to unpack .../mlton-tools_20100608-5.1_amd64.deb ... | |
| ==> default: Unpacking mlton-tools (20100608-5.1) ... | |
| ==> default: Selecting previously unselected package mlton-doc. | |
| ==> default: Preparing to unpack .../mlton-doc_20100608-5.1_all.deb ... | |
| ==> default: Unpacking mlton-doc (20100608-5.1) ... | |
| ==> default: Selecting previously unselected package mlton. | |
| ==> default: Preparing to unpack .../mlton_20100608-5.1_all.deb ... | |
| ==> default: Unpacking mlton (20100608-5.1) ... | |
| ==> default: Selecting previously unselected package mongodb-org-shell. | |
| ==> default: Preparing to unpack .../mongodb-org-shell_2.6.4_amd64.deb ... | |
| ==> default: Unpacking mongodb-org-shell (2.6.4) ... | |
| ==> default: Selecting previously unselected package python-software-properties. | |
| ==> default: Preparing to unpack .../python-software-properties_0.92.37.1_all.deb ... | |
| ==> default: Unpacking python-software-properties (0.92.37.1) ... | |
| ==> default: Selecting previously unselected package sqlite3. | |
| ==> default: Preparing to unpack .../sqlite3_3.8.2-1ubuntu2_amd64.deb ... | |
| ==> default: Unpacking sqlite3 (3.8.2-1ubuntu2) ... | |
| ==> default: Selecting previously unselected package tcl8.6. | |
| ==> default: Preparing to unpack .../tcl8.6_8.6.1-4ubuntu1_amd64.deb ... | |
| ==> default: Unpacking tcl8.6 (8.6.1-4ubuntu1) ... | |
| ==> default: Selecting previously unselected package tcl. | |
| ==> default: Preparing to unpack .../tcl_8.6.0+6ubuntu3_amd64.deb ... | |
| ==> default: Unpacking tcl (8.6.0+6ubuntu3) ... | |
| ==> default: Selecting previously unselected package tk8.6. | |
| ==> default: Preparing to unpack .../tk8.6_8.6.1-3ubuntu2_amd64.deb ... | |
| ==> default: Unpacking tk8.6 (8.6.1-3ubuntu2) ... | |
| ==> default: Selecting previously unselected package tk. | |
| ==> default: Preparing to unpack .../tk_8.6.0+6ubuntu3_amd64.deb ... | |
| ==> default: Unpacking tk (8.6.0+6ubuntu3) ... | |
| ==> default: Selecting previously unselected package unzip. | |
| ==> default: Preparing to unpack .../unzip_6.0-9ubuntu1_amd64.deb ... | |
| ==> default: Unpacking unzip (6.0-9ubuntu1) ... | |
| ==> default: Selecting previously unselected package x11-utils. | |
| ==> default: Preparing to unpack .../x11-utils_7.7+1_amd64.deb ... | |
| ==> default: Unpacking x11-utils (7.7+1) ... | |
| ==> default: Selecting previously unselected package xbitmaps. | |
| ==> default: Preparing to unpack .../xbitmaps_1.1.1-2_all.deb ... | |
| ==> default: Unpacking xbitmaps (1.1.1-2) ... | |
| ==> default: Selecting previously unselected package xterm. | |
| ==> default: Preparing to unpack .../xterm_297-1ubuntu1_amd64.deb ... | |
| ==> default: Unpacking xterm (297-1ubuntu1) ... | |
| ==> default: Selecting previously unselected package libffi-dev:amd64. | |
| ==> default: Preparing to unpack .../libffi-dev_3.1~rc1+r3.0.13-12_amd64.deb ... | |
| ==> default: Unpacking libffi-dev:amd64 (3.1~rc1+r3.0.13-12) ... | |
| ==> default: Selecting previously unselected package libjson-c-dev:amd64. | |
| ==> default: Preparing to unpack .../libjson-c-dev_0.11-3ubuntu1.2_amd64.deb ... | |
| ==> default: Unpacking libjson-c-dev:amd64 (0.11-3ubuntu1.2) ... | |
| ==> default: Selecting previously unselected package libjson0-dev:amd64. | |
| ==> default: Preparing to unpack .../libjson0-dev_0.11-3ubuntu1.2_amd64.deb ... | |
| ==> default: Unpacking libjson0-dev:amd64 (0.11-3ubuntu1.2) ... | |
| ==> default: Selecting previously unselected package libyaml-dev:amd64. | |
| ==> default: Preparing to unpack .../libyaml-dev_0.1.4-3ubuntu3_amd64.deb ... | |
| ==> default: Unpacking libyaml-dev:amd64 (0.1.4-3ubuntu3) ... | |
| ==> default: Processing triggers for man-db (2.6.7.1-1) ... | |
| ==> default: debconf: unable to initialize frontend: Dialog | |
| ==> default: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) | |
| ==> default: debconf: falling back to frontend: Readline | |
| ==> default: debconf: unable to initialize frontend: Readline | |
| ==> default: debconf: (This frontend requires a controlling tty.) | |
| ==> default: debconf: falling back to frontend: Teletype | |
| ==> default: Processing triggers for install-info (5.2.0.dfsg.1-2) ... | |
| ==> default: Processing triggers for mime-support (3.54ubuntu1) ... | |
| ==> default: Setting up liblzo2-2:amd64 (2.06-1.2ubuntu1.1) ... | |
| ==> default: Setting up libnettle4:amd64 (2.7.1-1) ... | |
| ==> default: Setting up libarchive13:amd64 (3.1.2-7ubuntu2) ... | |
| ==> default: Setting up libatk1.0-data (2.10.0-2ubuntu2) ... | |
| ==> default: Setting up libatk1.0-0:amd64 (2.10.0-2ubuntu2) ... | |
| ==> default: Setting up libavahi-common-data:amd64 (0.6.31-4ubuntu1) ... | |
| ==> default: Setting up libavahi-common3:amd64 (0.6.31-4ubuntu1) ... | |
| ==> default: Setting up libavahi-client3:amd64 (0.6.31-4ubuntu1) ... | |
| ==> default: Setting up fonts-dejavu-core (2.34-1ubuntu1) ... | |
| ==> default: Setting up fontconfig-config (2.11.0-0ubuntu4.1) ... | |
| ==> default: Setting up libfontconfig1:amd64 (2.11.0-0ubuntu4.1) ... | |
| ==> default: Setting up libxcb-render0:amd64 (1.10-2ubuntu1) ... | |
| ==> default: Setting up libxcb-shm0:amd64 (1.10-2ubuntu1) ... | |
| ==> default: Setting up libcairo2:amd64 (1.13.0~20140204-0ubuntu1) ... | |
| ==> default: Setting up libcroco3:amd64 (0.6.8-2ubuntu1) ... | |
| ==> default: Setting up libcups2:amd64 (1.7.2-0ubuntu1.1) ... | |
| ==> default: Setting up libdatrie1:amd64 (0.2.8-1) ... | |
| ==> default: Setting up libevent-core-2.0-5:amd64 (2.0.21-stable-1ubuntu1) ... | |
| ==> default: Setting up libevent-extra-2.0-5:amd64 (2.0.21-stable-1ubuntu1) ... | |
| ==> default: Setting up libevent-openssl-2.0-5:amd64 (2.0.21-stable-1ubuntu1) ... | |
| ==> default: Setting up libevent-pthreads-2.0-5:amd64 (2.0.21-stable-1ubuntu1) ... | |
| ==> default: Setting up libjpeg-turbo8:amd64 (1.3.0-0ubuntu2) ... | |
| ==> default: Setting up libjpeg8:amd64 (8c-2ubuntu8) ... | |
| ==> default: Setting up libjasper1:amd64 (1.900.1-14ubuntu3) ... | |
| ==> default: Setting up libjbig0:amd64 (2.0-2ubuntu4.1) ... | |
| ==> default: Setting up libtiff5:amd64 (4.0.3-7ubuntu0.1) ... | |
| ==> default: Setting up libgdk-pixbuf2.0-common (2.30.7-0ubuntu1) ... | |
| ==> default: Setting up libgdk-pixbuf2.0-0:amd64 (2.30.7-0ubuntu1) ... | |
| ==> default: Setting up libunistring0:amd64 (0.9.3-5ubuntu3) ... | |
| ==> default: Setting up libgettextpo0:amd64 (0.18.3.1-1ubuntu3) ... | |
| ==> default: Setting up libgmpxx4ldbl:amd64 (2:5.1.3+dfsg-1ubuntu1) ... | |
| ==> default: Setting up libgraphite2-3:amd64 (1.2.4-1ubuntu1) ... | |
| ==> default: Setting up libgssrpc4:amd64 (1.12+dfsg-2ubuntu4.2) ... | |
| ==> default: Setting up libgstreamer0.10-0:amd64 (0.10.36-1.2ubuntu3) ... | |
| ==> default: Setting up liborc-0.4-0:amd64 (1:0.4.18-1ubuntu1) ... | |
| ==> default: Setting up libgstreamer-plugins-base0.10-0:amd64 (0.10.36-1.1ubuntu2) ... | |
| ==> default: Setting up libgtk2.0-common (2.24.23-0ubuntu1.1) ... | |
| ==> default: Setting up libthai-data (0.1.20-3) ... | |
| ==> default: Setting up libthai0:amd64 (0.1.20-3) ... | |
| ==> default: Setting up fontconfig (2.11.0-0ubuntu4.1) ... | |
| ==> default: Regenerating fonts cache... | |
| ==> default: done. | |
| ==> default: Setting up libpango-1.0-0:amd64 (1.36.3-1ubuntu1) ... | |
| ==> default: Setting up libharfbuzz0b:amd64 (0.9.27-1) ... | |
| ==> default: Setting up libpangoft2-1.0-0:amd64 (1.36.3-1ubuntu1) ... | |
| ==> default: Setting up libpangocairo-1.0-0:amd64 (1.36.3-1ubuntu1) ... | |
| ==> default: Setting up libxcursor1:amd64 (1:1.1.14-1) ... | |
| ==> default: Setting up libxi6:amd64 (2:1.7.1.901-1ubuntu1) ... | |
| ==> default: Setting up libxinerama1:amd64 (2:1.1.3-1) ... | |
| ==> default: Setting up libgtk2.0-0:amd64 (2.24.23-0ubuntu1.1) ... | |
| ==> default: Setting up libkadm5clnt-mit9:amd64 (1.12+dfsg-2ubuntu4.2) ... | |
| ==> default: Setting up libkdb5-7:amd64 (1.12+dfsg-2ubuntu4.2) ... | |
| ==> default: Setting up libkadm5srv-mit9:amd64 (1.12+dfsg-2ubuntu4.2) ... | |
| ==> default: Setting up libltdl7:amd64 (2.4.2-1.7ubuntu1) ... | |
| ==> default: Setting up mysql-common (5.5.38-0ubuntu0.14.04.1) ... | |
| ==> default: Setting up libmysqlclient18:amd64 (5.5.38-0ubuntu0.14.04.1) ... | |
| ==> default: Setting up libpcrecpp0:amd64 (1:8.31-2ubuntu2) ... | |
| ==> default: Setting up libtcl8.6:amd64 (8.6.1-4ubuntu1) ... | |
| ==> default: Setting up libxft2:amd64 (2.3.1-2) ... | |
| ==> default: Setting up libxss1:amd64 (1:1.2.2-1) ... | |
| ==> default: Setting up libtk8.6:amd64 (8.6.1-3ubuntu2) ... | |
| ==> default: Setting up libwxbase2.8-0:amd64 (2.8.12.1+dfsg-2ubuntu2) ... | |
| ==> default: Setting up libwxgtk2.8-0:amd64 (2.8.12.1+dfsg-2ubuntu2) ... | |
| ==> default: Setting up libxcb-shape0:amd64 (1.10-2ubuntu1) ... | |
| ==> default: Setting up libxslt1.1:amd64 (1.1.28-2build1) ... | |
| ==> default: Setting up libxtst6:amd64 (2:1.2.2-1) ... | |
| ==> default: Setting up libxv1:amd64 (2:1.0.10-1) ... | |
| ==> default: Setting up libxxf86dga1:amd64 (2:1.1.4-1) ... | |
| ==> default: Setting up libgnutlsxx27:amd64 (2.12.23-12ubuntu2.1) ... | |
| ==> default: Setting up m4 (1.4.17-2ubuntu1) ... | |
| ==> default: Setting up autoconf (2.69-6) ... | |
| ==> default: Setting up autotools-dev (20130810.1) ... | |
| ==> default: Setting up automake (1:1.14.1-2ubuntu1) ... | |
| ==> default: update-alternatives: | |
| ==> default: using /usr/bin/automake-1.14 to provide /usr/bin/automake (automake) in auto mode | |
| ==> default: Setting up libbison-dev:amd64 (2:3.0.2.dfsg-2) ... | |
| ==> default: Setting up bison (2:3.0.2.dfsg-2) ... | |
| ==> default: update-alternatives: | |
| ==> default: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode | |
| ==> default: Setting up libregexp-common-perl (2013031301-1) ... | |
| ==> default: Setting up cloc (1.60-1) ... | |
| ==> default: Setting up cmake-data (2.8.12.2-0ubuntu3) ... | |
| ==> default: Setting up cmake (2.8.12.2-0ubuntu3) ... | |
| ==> default: Setting up dstat (0.7.2-3build1) ... | |
| ==> default: Setting up gettext (0.18.3.1-1ubuntu3) ... | |
| ==> default: Setting up git-core (1:1.9.1-1) ... | |
| ==> default: Setting up hicolor-icon-theme (0.13-1) ... | |
| ==> default: Setting up htop (1.0.2-3) ... | |
| ==> default: Setting up icu-devtools (52.1-3) ... | |
| ==> default: Setting up comerr-dev (2.1-1.42.9-3ubuntu1) ... | |
| ==> default: Setting up krb5-multidev (1.12+dfsg-2ubuntu4.2) ... | |
| ==> default: Setting up libasprintf-dev:amd64 (0.18.3.1-1ubuntu3) ... | |
| ==> default: Setting up libbz2-dev:amd64 (1.0.6-5) ... | |
| ==> default: Setting up pkg-config (0.26-1ubuntu4) ... | |
| ==> default: Setting up libidn11-dev (1.28-1ubuntu2) ... | |
| ==> default: Setting up libkrb5-dev (1.12+dfsg-2ubuntu4.2) ... | |
| ==> default: Setting up libldap2-dev:amd64 (2.4.31-1+nmu2ubuntu8) ... | |
| ==> default: Setting up libgpg-error-dev (1.12-0.2ubuntu1) ... | |
| ==> default: Setting up libgcrypt11-dev (1.5.3-2ubuntu4) ... | |
| ==> default: Setting up zlib1g-dev:amd64 (1:1.2.8.dfsg-1ubuntu1) ... | |
| ==> default: Setting up libtasn1-6-dev (3.4-3ubuntu0.1) ... | |
| ==> default: Setting up libp11-kit-dev (0.20.2-2ubuntu2) ... | |
| ==> default: Setting up libgnutls-dev (2.12.23-12ubuntu2.1) ... | |
| ==> default: Setting up librtmp-dev (2.4+20121230.gitdf6c518-1) ... | |
| ==> default: Setting up libssl-dev:amd64 (1.0.1f-1ubuntu2.5) ... | |
| ==> default: Setting up libcurl4-openssl-dev:amd64 (7.35.0-1ubuntu2) ... | |
| ==> default: Setting up libevent-dev (2.0.21-stable-1ubuntu1) ... | |
| ==> default: Setting up libgdbm-dev (1.8.3-12build1) ... | |
| ==> default: Setting up libgettextpo-dev:amd64 (0.18.3.1-1ubuntu3) ... | |
| ==> default: Setting up libgmp-dev:amd64 (2:5.1.3+dfsg-1ubuntu1) ... | |
| ==> default: Setting up libgtk2.0-bin (2.24.23-0ubuntu1.1) ... | |
| ==> default: Setting up libicu-dev:amd64 (52.1-3) ... | |
| ==> default: Setting up libltdl-dev:amd64 (2.4.2-1.7ubuntu1) ... | |
| ==> default: Setting up libmcrypt4 (2.5.8-3.1ubuntu1) ... | |
| ==> default: Setting up libmcrypt-dev (2.5.8-3.1ubuntu1) ... | |
| ==> default: Setting up libmysqlclient-dev (5.5.38-0ubuntu0.14.04.1) ... | |
| ==> default: Setting up libtinfo-dev:amd64 (5.9+20140118-1ubuntu1) ... | |
| ==> default: Setting up libncurses5-dev:amd64 (5.9+20140118-1ubuntu1) ... | |
| ==> default: Setting up libpcre3-dev:amd64 (1:8.31-2ubuntu2) ... | |
| ==> default: Setting up libpq5 (9.3.5-0ubuntu0.14.04.1) ... | |
| ==> default: Setting up libpq-dev (9.3.5-0ubuntu0.14.04.1) ... | |
| ==> default: Setting up libreadline6-dev:amd64 (6.3-4ubuntu2) ... | |
| ==> default: Setting up libsqlite3-dev:amd64 (3.8.2-1ubuntu2) ... | |
| ==> default: Setting up libssl-doc (1.0.1f-1ubuntu2.5) ... | |
| ==> default: Setting up libtool (2.4.2-1.7ubuntu1) ... | |
| ==> default: Setting up libutempter0 (1.1.5-4build1) ... | |
| ==> default: Creating utempter group... | |
| ==> default: Setting up libxml2-dev:amd64 (2.9.1+dfsg1-3ubuntu4.3) ... | |
| ==> default: Setting up libxslt1-dev:amd64 (1.1.28-2build1) ... | |
| ==> default: Setting up mercurial-common (2.8.2-1ubuntu1) ... | |
| ==> default: Setting up mercurial (2.8.2-1ubuntu1) ... | |
| ==> default: debconf: unable to initialize frontend: Dialog | |
| ==> default: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) | |
| ==> default: debconf: falling back to frontend: Readline | |
| ==> default: debconf: unable to initialize frontend: Readline | |
| ==> default: debconf: (This frontend requires a controlling tty.) | |
| ==> default: debconf: falling back to frontend: Teletype | |
| ==> default: Creating config file /etc/mercurial/hgrc.d/hgext.rc with new version | |
| ==> default: Setting up mlton-basis (20100608-5.1) ... | |
| ==> default: Setting up mlton-runtime-x86-64-linux-gnu (20100608-5.1) ... | |
| ==> default: Setting up mlton-runtime-native (20100608-5.1) ... | |
| ==> default: Setting up mlton-compiler (20100608-5.1) ... | |
| ==> default: Setting up mlton-tools (20100608-5.1) ... | |
| ==> default: Setting up mlton-doc (20100608-5.1) ... | |
| ==> default: Setting up mlton (20100608-5.1) ... | |
| ==> default: Setting up mongodb-org-shell (2.6.4) ... | |
| ==> default: Setting up python-software-properties (0.92.37.1) ... | |
| ==> default: Setting up sqlite3 (3.8.2-1ubuntu2) ... | |
| ==> default: Setting up tcl8.6 (8.6.1-4ubuntu1) ... | |
| ==> default: Setting up tcl (8.6.0+6ubuntu3) ... | |
| ==> default: Setting up tk8.6 (8.6.1-3ubuntu2) ... | |
| ==> default: Setting up tk (8.6.0+6ubuntu3) ... | |
| ==> default: Setting up unzip (6.0-9ubuntu1) ... | |
| ==> default: Setting up x11-utils (7.7+1) ... | |
| ==> default: Setting up xbitmaps (1.1.1-2) ... | |
| ==> default: Setting up xterm (297-1ubuntu1) ... | |
| ==> default: update-alternatives: | |
| ==> default: using /usr/bin/xterm to provide /usr/bin/x-terminal-emulator (x-terminal-emulator) in auto mode | |
| ==> default: update-alternatives: | |
| ==> default: using /usr/bin/lxterm to provide /usr/bin/x-terminal-emulator (x-terminal-emulator) in auto mode | |
| ==> default: Setting up libffi-dev:amd64 (3.1~rc1+r3.0.13-12) ... | |
| ==> default: Setting up libjson-c-dev:amd64 (0.11-3ubuntu1.2) ... | |
| ==> default: Setting up libjson0-dev:amd64 (0.11-3ubuntu1.2) ... | |
| ==> default: Setting up libyaml-dev:amd64 (0.1.4-3ubuntu3) ... | |
| ==> default: Processing triggers for libc-bin (2.19-0ubuntu6.1) ... | |
| ==> default: gpg: | |
| ==> default: keyring `/tmp/tmp90k9e9_a/secring.gpg' created | |
| ==> default: gpg: | |
| ==> default: keyring `/tmp/tmp90k9e9_a/pubring.gpg' created | |
| ==> default: gpg: | |
| ==> default: requesting key BA9EF27F from hkp server keyserver.ubuntu.com | |
| ==> default: gpg: | |
| ==> default: /tmp/tmp90k9e9_a/trustdb.gpg: trustdb created | |
| ==> default: gpg: | |
| ==> default: key BA9EF27F: public key "Launchpad Toolchain builds" imported | |
| ==> default: gpg: | |
| ==> default: Total number processed: 1 | |
| ==> default: gpg: imported: 1 (RSA: 1) | |
| ==> default: OK | |
| ==> default: Ign http://ppa.launchpad.net trusty InRelease | |
| ==> default: Get:1 http://ppa.launchpad.net trusty Release.gpg [316 B] | |
| ==> default: Get:2 http://ppa.launchpad.net trusty Release [14.0 kB] | |
| ==> default: Get:3 http://ppa.launchpad.net trusty/main amd64 Packages [24.3 kB] | |
| ==> default: Ign http://ppa.launchpad.net trusty/main Translation-en_US | |
| ==> default: Ign http://ppa.launchpad.net trusty/main Translation-en | |
| ==> default: Ign http://security.ubuntu.com trusty-security InRelease | |
| ==> default: Ign http://archive.ubuntu.com trusty InRelease | |
| ==> default: Ign http://downloads-distro.mongodb.org dist InRelease | |
| ==> default: Hit http://security.ubuntu.com trusty-security Release.gpg | |
| ==> default: Ign http://archive.ubuntu.com trusty-updates InRelease | |
| ==> default: Hit http://archive.ubuntu.com trusty Release.gpg | |
| ==> default: Hit http://security.ubuntu.com trusty-security Release | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates Release.gpg | |
| ==> default: Hit http://security.ubuntu.com trusty-security/main Sources | |
| ==> default: Hit http://downloads-distro.mongodb.org dist Release.gpg | |
| ==> default: Hit http://archive.ubuntu.com trusty Release | |
| ==> default: Hit http://security.ubuntu.com trusty-security/universe Sources | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates Release | |
| ==> default: Hit http://security.ubuntu.com trusty-security/main amd64 Packages | |
| ==> default: Hit http://downloads-distro.mongodb.org dist Release | |
| ==> default: Hit http://archive.ubuntu.com trusty/main Sources | |
| ==> default: Hit http://security.ubuntu.com trusty-security/universe amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty/universe Sources | |
| ==> default: Hit http://security.ubuntu.com trusty-security/main Translation-en | |
| ==> default: Hit http://archive.ubuntu.com trusty/main amd64 Packages | |
| ==> default: Hit http://security.ubuntu.com trusty-security/universe Translation-en | |
| ==> default: Hit http://downloads-distro.mongodb.org dist/10gen amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty/universe amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty/main Translation-en | |
| ==> default: Hit http://archive.ubuntu.com trusty/universe Translation-en | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/main Sources | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/universe Sources | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/main amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/universe amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/main Translation-en | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/universe Translation-en | |
| ==> default: Ign http://archive.ubuntu.com trusty/main Translation-en_US | |
| ==> default: Ign http://archive.ubuntu.com trusty/universe Translation-en_US | |
| ==> default: Ign http://downloads-distro.mongodb.org dist/10gen Translation-en_US | |
| ==> default: Ign http://downloads-distro.mongodb.org dist/10gen Translation-en | |
| ==> default: Fetched 38.6 kB in 7s (5,103 B/s) | |
| ==> default: Reading package lists... | |
| ==> default: Reading package lists... | |
| ==> default: Building dependency tree... | |
| ==> default: Reading state information... | |
| ==> default: g++-4.8 is already the newest version. | |
| ==> default: g++-4.8 set to manually installed. | |
| ==> default: gcc-4.8 is already the newest version. | |
| ==> default: gcc-4.8 set to manually installed. | |
| ==> default: 0 upgraded, 0 newly installed, 0 to remove and 11 not upgraded. | |
| ==> default: INSTALL: sudo apt-get -y autoremove (cwd=$FWROOTinstalls) | |
| ==> default: Reading package lists... | |
| ==> default: Building dependency tree... | |
| ==> default: Reading state information... | |
| ==> default: 0 upgraded, 0 newly installed, 0 to remove and 11 not upgraded. | |
| ==> default: | |
| ==> default: INSTALL: Finished installing server software | |
| ==> default: | |
| ==> default: INSTALL: Installing database software | |
| ==> default: INSTALL: yes yes | cd .. && sftp -oStrictHostKeyChecking=no -b ../config/database_sftp_batch -i /home/vagrant/.ssh/id_rsa vagrant@127.0.0.1 (cwd=$FWROOTinstalls) | |
| ==> default: yes: | |
| ==> default: standard output | |
| ==> default: : Broken pipe | |
| ==> default: yes: | |
| ==> default: write error | |
| ==> default: Warning: Permanently added '127.0.0.1' (ECDSA) to the list of known hosts. | |
| ==> default: sftp> lcd .. | |
| ==> default: sftp> put config/my.cnf | |
| ==> default: sftp> put config/mongodb.conf | |
| ==> default: sftp> put config/create.sql | |
| ==> default: sftp> put config/create.js | |
| ==> default: sftp> put config/create-postgres-database.sql | |
| ==> default: sftp> put config/create-postgres.sql | |
| ==> default: sftp> put config/postgresql.conf | |
| ==> default: sftp> put config/pg_hba.conf | |
| ==> default: sftp> put config/usr.sbin.mysqld | |
| ==> default: sftp> put config/60-postgresql-shm.conf | |
| ==> default: sftp> put config/mysql | |
| ==> default: sftp> put config/mysql.conf | |
| ==> default: sftp> -mkdir cassandra | |
| ==> default: sftp> put -r config/cassandra | |
| ==> default: Entering config/cassandra/ | |
| ==> default: sftp> put config/redis.conf | |
| ==> default: sftp> put config/create-redis.sh | |
| ==> default: | |
| ==> default: INSTALL: ssh -T -o StrictHostKeyChecking=no vagrant@127.0.0.1 -i /home/vagrant/.ssh/id_rsa | |
| ^[[B==> default: Ign http://ppa.launchpad.net trusty InRelease | |
| ==> default: Hit http://ppa.launchpad.net trusty Release.gpg | |
| ==> default: Hit http://ppa.launchpad.net trusty Release | |
| ==> default: Hit http://ppa.launchpad.net trusty/main amd64 Packages | |
| ==> default: Ign http://ppa.launchpad.net trusty/main Translation-en_US | |
| ==> default: Ign http://ppa.launchpad.net trusty/main Translation-en | |
| ==> default: Ign http://security.ubuntu.com trusty-security InRelease | |
| ==> default: Ign http://archive.ubuntu.com trusty InRelease | |
| ==> default: Ign http://downloads-distro.mongodb.org dist InRelease | |
| ==> default: Hit http://security.ubuntu.com trusty-security Release.gpg | |
| ==> default: Ign http://archive.ubuntu.com trusty-updates InRelease | |
| ==> default: Hit http://security.ubuntu.com trusty-security Release | |
| ==> default: Hit http://archive.ubuntu.com trusty Release.gpg | |
| ==> default: Hit http://downloads-distro.mongodb.org dist Release.gpg | |
| ==> default: Hit http://security.ubuntu.com trusty-security/main Sources | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates Release.gpg | |
| ==> default: Hit http://security.ubuntu.com trusty-security/universe Sources | |
| ==> default: Hit http://archive.ubuntu.com trusty Release | |
| ==> default: Hit http://security.ubuntu.com trusty-security/main amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates Release | |
| ==> default: Hit http://downloads-distro.mongodb.org dist Release | |
| ==> default: Hit http://security.ubuntu.com trusty-security/universe amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty/main Sources | |
| ==> default: Hit http://security.ubuntu.com trusty-security/main Translation-en | |
| ==> default: Hit http://archive.ubuntu.com trusty/universe Sources | |
| ==> default: Hit http://downloads-distro.mongodb.org dist/10gen amd64 Packages | |
| ==> default: Hit http://security.ubuntu.com trusty-security/universe Translation-en | |
| ==> default: Hit http://archive.ubuntu.com trusty/main amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty/universe amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty/main Translation-en | |
| ==> default: Hit http://archive.ubuntu.com trusty/universe Translation-en | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/main Sources | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/universe Sources | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/main amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/universe amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/main Translation-en | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/universe Translation-en | |
| ==> default: Ign http://archive.ubuntu.com trusty/main Translation-en_US | |
| ==> default: Ign http://downloads-distro.mongodb.org dist/10gen Translation-en_US | |
| ==> default: Ign http://archive.ubuntu.com trusty/universe Translation-en_US | |
| ==> default: Ign http://downloads-distro.mongodb.org dist/10gen Translation-en | |
| ==> default: Reading package lists... | |
| ==> default: Reading package lists... | |
| ==> default: Building dependency tree... | |
| ==> default: Reading state information... | |
| ==> default: build-essential is already the newest version. | |
| ==> default: git is already the newest version. | |
| ==> default: libreadline6-dev is already the newest version. | |
| ==> default: libpq-dev is already the newest version. | |
| ==> default: The following extra packages will be installed: | |
| ==> default: libev4 libjemalloc1 postgresql-9.3 postgresql-client-9.3 | |
| ==> default: postgresql-client-common postgresql-common redis-tools ssl-cert | |
| ==> default: Suggested packages: | |
| ==> default: oidentd ident-server locales-all postgresql-doc-9.3 openssl-blacklist | |
| ==> default: The following NEW packages will be installed: | |
| ==> default: libev-dev libev4 libjemalloc1 postgresql postgresql-9.3 | |
| ==> default: postgresql-client-9.3 postgresql-client-common postgresql-common | |
| ==> default: redis-server redis-tools ssl-cert | |
| ==> default: 0 upgraded, 11 newly installed, 0 to remove and 11 not upgraded. | |
| ==> default: Need to get 4,164 kB of archives. | |
| ==> default: After this operation, 16.9 MB of additional disk space will be used. | |
| ==> default: Get:1 http://archive.ubuntu.com/ubuntu/ trusty/universe libjemalloc1 amd64 3.5.1-2 [76.8 kB] | |
| ==> default: Get:2 http://archive.ubuntu.com/ubuntu/ trusty/main postgresql-client-common all 154 [25.4 kB] | |
| ==> default: Get:3 http://archive.ubuntu.com/ubuntu/ trusty-updates/main postgresql-client-9.3 amd64 9.3.5-0ubuntu0.14.04.1 [782 kB] | |
| ==> default: Get:4 http://archive.ubuntu.com/ubuntu/ trusty/main ssl-cert all 1.0.33 [16.6 kB] | |
| ==> default: Get:5 http://archive.ubuntu.com/ubuntu/ trusty/main postgresql-common all 154 [103 kB] | |
| ==> default: Get:6 http://archive.ubuntu.com/ubuntu/ trusty-updates/main postgresql-9.3 amd64 9.3.5-0ubuntu0.14.04.1 [2,670 kB] | |
| ==> default: Get:7 http://archive.ubuntu.com/ubuntu/ trusty/main postgresql all 9.3+154 [5,088 B] | |
| ==> default: Get:8 http://archive.ubuntu.com/ubuntu/ trusty/universe redis-tools amd64 2:2.8.4-2 [65.7 kB] | |
| ==> default: Get:9 http://archive.ubuntu.com/ubuntu/ trusty/universe redis-server amd64 2:2.8.4-2 [267 kB] | |
| ==> default: Get:10 http://archive.ubuntu.com/ubuntu/ trusty/universe libev4 amd64 1:4.15-3 [29.6 kB] | |
| ==> default: Get:11 http://archive.ubuntu.com/ubuntu/ trusty/universe libev-dev amd64 1:4.15-3 [122 kB] | |
| ==> default: debconf: unable to initialize frontend: Dialog | |
| ==> default: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) | |
| ==> default: debconf: falling back to frontend: Readline | |
| ==> default: debconf: unable to initialize frontend: Readline | |
| ==> default: debconf: (This frontend requires a controlling tty.) | |
| ==> default: debconf: falling back to frontend: Teletype | |
| ==> default: dpkg-preconfigure: unable to re-open stdin: | |
| ==> default: Fetched 4,164 kB in 10s (382 kB/s) | |
| ==> default: Selecting previously unselected package libjemalloc1. | |
| ==> default: (Reading database ... 73087 files and directories currently installed.) | |
| ==> default: Preparing to unpack .../libjemalloc1_3.5.1-2_amd64.deb ... | |
| ==> default: Unpacking libjemalloc1 (3.5.1-2) ... | |
| ==> default: Selecting previously unselected package postgresql-client-common. | |
| ==> default: Preparing to unpack .../postgresql-client-common_154_all.deb ... | |
| ==> default: Unpacking postgresql-client-common (154) ... | |
| ==> default: Selecting previously unselected package postgresql-client-9.3. | |
| ==> default: Preparing to unpack .../postgresql-client-9.3_9.3.5-0ubuntu0.14.04.1_amd64.deb ... | |
| ==> default: Unpacking postgresql-client-9.3 (9.3.5-0ubuntu0.14.04.1) ... | |
| ==> default: Selecting previously unselected package ssl-cert. | |
| ==> default: Preparing to unpack .../ssl-cert_1.0.33_all.deb ... | |
| ==> default: Unpacking ssl-cert (1.0.33) ... | |
| ==> default: Selecting previously unselected package postgresql-common. | |
| ==> default: Preparing to unpack .../postgresql-common_154_all.deb ... | |
| ==> default: Adding 'diversion of /usr/bin/pg_config to /usr/bin/pg_config.libpq-dev by postgresql-common' | |
| ==> default: Unpacking postgresql-common (154) ... | |
| ==> default: Selecting previously unselected package postgresql-9.3. | |
| ==> default: Preparing to unpack .../postgresql-9.3_9.3.5-0ubuntu0.14.04.1_amd64.deb ... | |
| ==> default: Unpacking postgresql-9.3 (9.3.5-0ubuntu0.14.04.1) ... | |
| ==> default: Selecting previously unselected package postgresql. | |
| ==> default: Preparing to unpack .../postgresql_9.3+154_all.deb ... | |
| ==> default: Unpacking postgresql (9.3+154) ... | |
| ==> default: Selecting previously unselected package redis-tools. | |
| ==> default: Preparing to unpack .../redis-tools_2%3a2.8.4-2_amd64.deb ... | |
| ==> default: Unpacking redis-tools (2:2.8.4-2) ... | |
| ==> default: Selecting previously unselected package redis-server. | |
| ==> default: Preparing to unpack .../redis-server_2%3a2.8.4-2_amd64.deb ... | |
| ==> default: Unpacking redis-server (2:2.8.4-2) ... | |
| ==> default: Selecting previously unselected package libev4. | |
| ==> default: Preparing to unpack .../libev4_1%3a4.15-3_amd64.deb ... | |
| ==> default: Unpacking libev4 (1:4.15-3) ... | |
| ==> default: Selecting previously unselected package libev-dev. | |
| ==> default: Preparing to unpack .../libev-dev_1%3a4.15-3_amd64.deb ... | |
| ==> default: Unpacking libev-dev (1:4.15-3) ... | |
| ==> default: Processing triggers for man-db (2.6.7.1-1) ... | |
| ==> default: debconf: unable to initialize frontend: Dialog | |
| ==> default: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) | |
| ==> default: debconf: falling back to frontend: Readline | |
| ==> default: debconf: unable to initialize frontend: Readline | |
| ==> default: debconf: (This frontend requires a controlling tty.) | |
| ==> default: debconf: falling back to frontend: Teletype | |
| ==> default: Processing triggers for ureadahead (0.100.0-16) ... | |
| ==> default: Setting up libjemalloc1 (3.5.1-2) ... | |
| ==> default: Setting up postgresql-client-common (154) ... | |
| ==> default: Setting up postgresql-client-9.3 (9.3.5-0ubuntu0.14.04.1) ... | |
| ==> default: update-alternatives: | |
| ==> default: using /usr/share/postgresql/9.3/man/man1/psql.1.gz to provide /usr/share/man/man1/psql.1.gz (psql.1.gz) in auto mode | |
| ==> default: Setting up ssl-cert (1.0.33) ... | |
| ==> default: debconf: unable to initialize frontend: Dialog | |
| ==> default: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) | |
| ==> default: debconf: falling back to frontend: Readline | |
| ==> default: debconf: unable to initialize frontend: Readline | |
| ==> default: debconf: (This frontend requires a controlling tty.) | |
| ==> default: debconf: falling back to frontend: Teletype | |
| ==> default: Setting up postgresql-common (154) ... | |
| ==> default: debconf: unable to initialize frontend: Dialog | |
| ==> default: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) | |
| ==> default: debconf: falling back to frontend: Readline | |
| ==> default: debconf: unable to initialize frontend: Readline | |
| ==> default: debconf: (This frontend requires a controlling tty.) | |
| ==> default: debconf: falling back to frontend: Teletype | |
| ==> default: Adding user postgres to group ssl-cert | |
| ==> default: Creating config file /etc/logrotate.d/postgresql-common with new version | |
| ==> default: Building PostgreSQL dictionaries from installed myspell/hunspell packages... | |
| ==> default: Removing obsolete dictionary files: | |
| ==> default: * No PostgreSQL clusters exist; see "man pg_createcluster" | |
| ==> default: Setting up redis-tools (2:2.8.4-2) ... | |
| ==> default: Setting up redis-server (2:2.8.4-2) ... | |
| ==> default: Starting redis-server: | |
| ==> default: redis-server. | |
| ==> default: Setting up libev4 (1:4.15-3) ... | |
| ==> default: Setting up libev-dev (1:4.15-3) ... | |
| ==> default: Processing triggers for ureadahead (0.100.0-16) ... | |
| ==> default: Setting up postgresql-9.3 (9.3.5-0ubuntu0.14.04.1) ... | |
| ==> default: Creating new cluster 9.3/main ... | |
| ==> default: config /etc/postgresql/9.3/main | |
| ==> default: data /var/lib/postgresql/9.3/main | |
| ==> default: locale en_US.UTF-8 | |
| ==> default: port 5432 | |
| ==> default: update-alternatives: | |
| ==> default: using /usr/share/postgresql/9.3/man/man1/postmaster.1.gz to provide /usr/share/man/man1/postmaster.1.gz (postmaster.1.gz) in auto mode | |
| ==> default: * Starting PostgreSQL 9.3 database server | |
| ==> default: ...done. | |
| ==> default: Setting up postgresql (9.3+154) ... | |
| ==> default: Processing triggers for libc-bin (2.19-0ubuntu6.1) ... | |
| ==> default: Reading package lists... | |
| ==> default: Building dependency tree... | |
| ==> default: Reading state information... | |
| ==> default: The following extra packages will be installed: | |
| ==> default: libaio1 libdbd-mysql-perl libdbi-perl libhtml-template-perl | |
| ==> default: libterm-readkey-perl mysql-client-5.5 mysql-client-core-5.5 mysql-server-5.5 | |
| ==> default: mysql-server-core-5.5 | |
| ==> default: Suggested packages: | |
| ==> default: libclone-perl libmldbm-perl libnet-daemon-perl libplrpc-perl | |
| ==> default: libsql-statement-perl libipc-sharedcache-perl tinyca mailx | |
| ==> default: The following NEW packages will be installed: | |
| ==> default: libaio1 libdbd-mysql-perl libdbi-perl libhtml-template-perl | |
| ==> default: libterm-readkey-perl mysql-client-5.5 mysql-client-core-5.5 mysql-server | |
| ==> default: mysql-server-5.5 mysql-server-core-5.5 | |
| ==> default: 0 upgraded, 10 newly installed, 0 to remove and 11 not upgraded. | |
| ==> default: Need to get 8,402 kB of archives. | |
| ==> default: After this operation, 92.9 MB of additional disk space will be used. | |
| ==> default: Get:1 http://archive.ubuntu.com/ubuntu/ trusty/main libaio1 amd64 0.3.109-4 [6,364 B] | |
| ==> default: Get:2 http://archive.ubuntu.com/ubuntu/ trusty/main libdbi-perl amd64 1.630-1 [879 kB] | |
| ==> default: Get:3 http://archive.ubuntu.com/ubuntu/ trusty/main libdbd-mysql-perl amd64 4.025-1 [99.3 kB] | |
| ==> default: Get:4 http://archive.ubuntu.com/ubuntu/ trusty/main libterm-readkey-perl amd64 2.31-1 [27.4 kB] | |
| ==> default: Get:5 http://archive.ubuntu.com/ubuntu/ trusty-updates/main mysql-client-core-5.5 amd64 5.5.38-0ubuntu0.14.04.1 [701 kB] | |
| ==> default: Get:6 http://archive.ubuntu.com/ubuntu/ trusty-updates/main mysql-client-5.5 amd64 5.5.38-0ubuntu0.14.04.1 [1,454 kB] | |
| ==> default: Get:7 http://archive.ubuntu.com/ubuntu/ trusty-updates/main mysql-server-core-5.5 amd64 5.5.38-0ubuntu0.14.04.1 [3,213 kB] | |
| ==> default: Get:8 http://archive.ubuntu.com/ubuntu/ trusty-updates/main mysql-server-5.5 amd64 5.5.38-0ubuntu0.14.04.1 [1,944 kB] | |
| ==> default: Get:9 http://archive.ubuntu.com/ubuntu/ trusty/main libhtml-template-perl all 2.95-1 [65.5 kB] | |
| ==> default: Get:10 http://archive.ubuntu.com/ubuntu/ trusty-updates/main mysql-server all 5.5.38-0ubuntu0.14.04.1 [12.4 kB] | |
| ==> default: debconf: unable to initialize frontend: Dialog | |
| ==> default: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) | |
| ==> default: debconf: falling back to frontend: Readline | |
| ==> default: debconf: unable to initialize frontend: Readline | |
| ==> default: debconf: (This frontend requires a controlling tty.) | |
| ==> default: debconf: falling back to frontend: Teletype | |
| ==> default: dpkg-preconfigure: unable to re-open stdin: | |
| ==> default: Fetched 8,402 kB in 12s (676 kB/s) | |
| ==> default: Selecting previously unselected package libaio1:amd64. | |
| ==> default: (Reading database ... 73556 files and directories currently installed.) | |
| ==> default: Preparing to unpack .../libaio1_0.3.109-4_amd64.deb ... | |
| ==> default: Unpacking libaio1:amd64 (0.3.109-4) ... | |
| ==> default: Selecting previously unselected package libdbi-perl. | |
| ==> default: Preparing to unpack .../libdbi-perl_1.630-1_amd64.deb ... | |
| ==> default: Unpacking libdbi-perl (1.630-1) ... | |
| ==> default: Selecting previously unselected package libdbd-mysql-perl. | |
| ==> default: Preparing to unpack .../libdbd-mysql-perl_4.025-1_amd64.deb ... | |
| ==> default: Unpacking libdbd-mysql-perl (4.025-1) ... | |
| ==> default: Selecting previously unselected package libterm-readkey-perl. | |
| ==> default: Preparing to unpack .../libterm-readkey-perl_2.31-1_amd64.deb ... | |
| ==> default: Unpacking libterm-readkey-perl (2.31-1) ... | |
| ==> default: Selecting previously unselected package mysql-client-core-5.5. | |
| ==> default: Preparing to unpack .../mysql-client-core-5.5_5.5.38-0ubuntu0.14.04.1_amd64.deb ... | |
| ==> default: Unpacking mysql-client-core-5.5 (5.5.38-0ubuntu0.14.04.1) ... | |
| ==> default: Selecting previously unselected package mysql-client-5.5. | |
| ==> default: Preparing to unpack .../mysql-client-5.5_5.5.38-0ubuntu0.14.04.1_amd64.deb ... | |
| ==> default: Unpacking mysql-client-5.5 (5.5.38-0ubuntu0.14.04.1) ... | |
| ==> default: Selecting previously unselected package mysql-server-core-5.5. | |
| ==> default: Preparing to unpack .../mysql-server-core-5.5_5.5.38-0ubuntu0.14.04.1_amd64.deb ... | |
| ==> default: Unpacking mysql-server-core-5.5 (5.5.38-0ubuntu0.14.04.1) ... | |
| ==> default: Selecting previously unselected package mysql-server-5.5. | |
| ==> default: Preparing to unpack .../mysql-server-5.5_5.5.38-0ubuntu0.14.04.1_amd64.deb ... | |
| ==> default: debconf: unable to initialize frontend: Dialog | |
| ==> default: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) | |
| ==> default: debconf: falling back to frontend: Readline | |
| ==> default: debconf: unable to initialize frontend: Readline | |
| ==> default: debconf: (This frontend requires a controlling tty.) | |
| ==> default: debconf: falling back to frontend: Teletype | |
| ==> default: Unpacking mysql-server-5.5 (5.5.38-0ubuntu0.14.04.1) ... | |
| ==> default: Selecting previously unselected package libhtml-template-perl. | |
| ==> default: Preparing to unpack .../libhtml-template-perl_2.95-1_all.deb ... | |
| ==> default: Unpacking libhtml-template-perl (2.95-1) ... | |
| ==> default: Selecting previously unselected package mysql-server. | |
| ==> default: Preparing to unpack .../mysql-server_5.5.38-0ubuntu0.14.04.1_all.deb ... | |
| ==> default: Unpacking mysql-server (5.5.38-0ubuntu0.14.04.1) ... | |
| ==> default: Processing triggers for man-db (2.6.7.1-1) ... | |
| ==> default: debconf: unable to initialize frontend: Dialog | |
| ==> default: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) | |
| ==> default: debconf: falling back to frontend: Readline | |
| ==> default: debconf: unable to initialize frontend: Readline | |
| ==> default: debconf: (This frontend requires a controlling tty.) | |
| ==> default: debconf: falling back to frontend: Teletype | |
| ==> default: Processing triggers for ureadahead (0.100.0-16) ... | |
| ==> default: Setting up libaio1:amd64 (0.3.109-4) ... | |
| ==> default: Setting up libdbi-perl (1.630-1) ... | |
| ==> default: Setting up libdbd-mysql-perl (4.025-1) ... | |
| ==> default: Setting up libterm-readkey-perl (2.31-1) ... | |
| ==> default: Setting up mysql-client-core-5.5 (5.5.38-0ubuntu0.14.04.1) ... | |
| ==> default: Setting up mysql-client-5.5 (5.5.38-0ubuntu0.14.04.1) ... | |
| ==> default: Setting up mysql-server-core-5.5 (5.5.38-0ubuntu0.14.04.1) ... | |
| ==> default: Setting up mysql-server-5.5 (5.5.38-0ubuntu0.14.04.1) ... | |
| ==> default: debconf: unable to initialize frontend: Dialog | |
| ==> default: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) | |
| ==> default: debconf: falling back to frontend: Readline | |
| ==> default: debconf: unable to initialize frontend: Readline | |
| ==> default: debconf: (This frontend requires a controlling tty.) | |
| ==> default: debconf: falling back to frontend: Teletype | |
| ==> default: 140828 17:29:18 [Warning] Using unique option prefix key_buffer instead of key_buffer_size is deprecated and will be removed in a future release. Please use the full name instead. | |
| ==> default: mysql start/running, process 21373 | |
| ==> default: Setting up libhtml-template-perl (2.95-1) ... | |
| ==> default: Processing triggers for ureadahead (0.100.0-16) ... | |
| ==> default: Setting up mysql-server (5.5.38-0ubuntu0.14.04.1) ... | |
| ==> default: Processing triggers for libc-bin (2.19-0ubuntu6.1) ... | |
| ==> default: mysql stop/waiting | |
| ==> default: * Reloading AppArmor profiles | |
| ==> default: Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd | |
| ==> default: ...done. | |
| ==> default: mysql start/running, process 21623 | |
| ==> default: CREATE ROLE | |
| ==> default: NOTICE: database "hello_world" does not exist, skipping | |
| ==> default: DROP DATABASE | |
| ==> default: CREATE DATABASE | |
| ==> default: GRANT | |
| ==> default: NOTICE: table "world" does not exist, skipping | |
| ==> default: DROP TABLE | |
| ==> default: CREATE TABLE | |
| ==> default: INSERT 0 10000 | |
| ==> default: NOTICE: table "fortune" does not exist, skipping | |
| ==> default: DROP TABLE | |
| ==> default: CREATE TABLE | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: NOTICE: table "World" does not exist, skipping | |
| ==> default: DROP TABLE | |
| ==> default: CREATE TABLE | |
| ==> default: INSERT 0 10000 | |
| ==> default: NOTICE: table "Fortune" does not exist, skipping | |
| ==> default: DROP TABLE | |
| ==> default: CREATE TABLE | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: INSERT 0 1 | |
| ==> default: * Stopping PostgreSQL 9.3 database server | |
| ==> default: ...done. | |
| ==> default: * Starting PostgreSQL 9.3 database server | |
| ==> default: ...done. | |
| ==> default: Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --homedir /tmp/tmp.l6NaMuiT5q --no-auto-check-trustdb --trust-model always --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyring /etc/apt/trusted.gpg.d/ubuntu-toolchain-r-test.gpg --keyserver hkp://keyserver.ubuntu.com:80 --recv 7F0CEB10 | |
| ==> default: gpg: | |
| ==> default: requesting key 7F0CEB10 from hkp server keyserver.ubuntu.com | |
| ==> default: gpg: | |
| ==> default: key 7F0CEB10: "Richard Kreuter <richard@10gen.com>" not changed | |
| ==> default: gpg: | |
| ==> default: Total number processed: 1 | |
| ==> default: gpg: | |
| ==> default: unchanged: 1 | |
| ==> default: deb http://downloads-distro.mongodb.org/repo/ubuntu-upstart dist 10gen | |
| ==> default: Ign http://ppa.launchpad.net trusty InRelease | |
| ==> default: Ign http://security.ubuntu.com trusty-security InRelease | |
| ==> default: Hit http://ppa.launchpad.net trusty Release.gpg | |
| ==> default: Hit http://security.ubuntu.com trusty-security Release.gpg | |
| ==> default: Hit http://ppa.launchpad.net trusty Release | |
| ==> default: Hit http://security.ubuntu.com trusty-security Release | |
| ==> default: Hit http://ppa.launchpad.net trusty/main amd64 Packages | |
| ==> default: Hit http://security.ubuntu.com trusty-security/main Sources | |
| ==> default: Hit http://security.ubuntu.com trusty-security/universe Sources | |
| ==> default: Hit http://security.ubuntu.com trusty-security/main amd64 Packages | |
| ==> default: Hit http://security.ubuntu.com trusty-security/universe amd64 Packages | |
| ==> default: Hit http://security.ubuntu.com trusty-security/main Translation-en | |
| ==> default: Hit http://security.ubuntu.com trusty-security/universe Translation-en | |
| ==> default: Ign http://ppa.launchpad.net trusty/main Translation-en_US | |
| ==> default: Ign http://ppa.launchpad.net trusty/main Translation-en | |
| ==> default: Ign http://archive.ubuntu.com trusty InRelease | |
| ==> default: Ign http://downloads-distro.mongodb.org dist InRelease | |
| ==> default: Ign http://archive.ubuntu.com trusty-updates InRelease | |
| ==> default: Hit http://archive.ubuntu.com trusty Release.gpg | |
| ==> default: Hit http://downloads-distro.mongodb.org dist Release.gpg | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates Release.gpg | |
| ==> default: Hit http://archive.ubuntu.com trusty Release | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates Release | |
| ==> default: Hit http://downloads-distro.mongodb.org dist Release | |
| ==> default: Hit http://archive.ubuntu.com trusty/main Sources | |
| ==> default: Hit http://archive.ubuntu.com trusty/universe Sources | |
| ==> default: Hit http://downloads-distro.mongodb.org dist/10gen amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty/main amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty/universe amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty/main Translation-en | |
| ==> default: Hit http://archive.ubuntu.com trusty/universe Translation-en | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/main Sources | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/universe Sources | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/main amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/universe amd64 Packages | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/main Translation-en | |
| ==> default: Hit http://archive.ubuntu.com trusty-updates/universe Translation-en | |
| ==> default: Ign http://archive.ubuntu.com trusty/main Translation-en_US | |
| ==> default: Ign http://downloads-distro.mongodb.org dist/10gen Translation-en_US | |
| ==> default: Ign http://archive.ubuntu.com trusty/universe Translation-en_US | |
| ==> default: Ign http://downloads-distro.mongodb.org dist/10gen Translation-en | |
| ==> default: Reading package lists... | |
| ==> default: Reading package lists... | |
| ==> default: Building dependency tree... | |
| ==> default: Reading state information... | |
| ==> default: Package 'mongodb-clients' is not installed, so not removed | |
| ==> default: 0 upgraded, 0 newly installed, 0 to remove and 11 not upgraded. | |
| ==> default: Reading package lists... | |
| ==> default: Building dependency tree... | |
| ==> default: Reading state information... | |
| ==> default: The following extra packages will be installed: | |
| ==> default: mongodb-org-mongos mongodb-org-server mongodb-org-tools | |
| ==> default: The following NEW packages will be installed: | |
| ==> default: mongodb-org mongodb-org-mongos mongodb-org-server mongodb-org-tools | |
| ==> default: 0 upgraded, 4 newly installed, 0 to remove and 11 not upgraded. | |
| ==> default: Need to get 110 MB of archives. | |
| ==> default: After this operation, 278 MB of additional disk space will be used. | |
| ==> default: Get:1 http://downloads-distro.mongodb.org/repo/ubuntu-upstart/ dist/10gen mongodb-org-server amd64 2.6.4 [9,438 kB] | |
| ==> default: Get:2 http://downloads-distro.mongodb.org/repo/ubuntu-upstart/ dist/10gen mongodb-org-mongos amd64 2.6.4 [7,171 kB] | |
| ==> default: Get:3 http://downloads-distro.mongodb.org/repo/ubuntu-upstart/ dist/10gen mongodb-org-tools amd64 2.6.4 [93.6 MB] | |
| ==> default: Get:4 http://downloads-distro.mongodb.org/repo/ubuntu-upstart/ dist/10gen mongodb-org amd64 2.6.4 [3,644 B] | |
| ==> default: debconf: unable to initialize frontend: Dialog | |
| ==> default: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) | |
| ==> default: debconf: falling back to frontend: Readline | |
| ==> default: debconf: unable to initialize frontend: Readline | |
| ==> default: debconf: (This frontend requires a controlling tty.) | |
| ==> default: debconf: falling back to frontend: Teletype | |
| ==> default: dpkg-preconfigure: unable to re-open stdin: | |
| ==> default: Fetched 110 MB in 47s (2,335 kB/s) | |
| ==> default: Selecting previously unselected package mongodb-org-server. | |
| ==> default: (Reading database ... 74004 files and directories currently installed.) | |
| ==> default: Preparing to unpack .../mongodb-org-server_2.6.4_amd64.deb ... | |
| ==> default: Unpacking mongodb-org-server (2.6.4) ... | |
| ==> default: Selecting previously unselected package mongodb-org-mongos. | |
| ==> default: Preparing to unpack .../mongodb-org-mongos_2.6.4_amd64.deb ... | |
| ==> default: Unpacking mongodb-org-mongos (2.6.4) ... | |
| ==> default: Selecting previously unselected package mongodb-org-tools. | |
| ==> default: Preparing to unpack .../mongodb-org-tools_2.6.4_amd64.deb ... | |
| ==> default: Unpacking mongodb-org-tools (2.6.4) ... | |
| ==> default: Selecting previously unselected package mongodb-org. | |
| ==> default: Preparing to unpack .../mongodb-org_2.6.4_amd64.deb ... | |
| ==> default: Unpacking mongodb-org (2.6.4) ... | |
| ==> default: Processing triggers for man-db (2.6.7.1-1) ... | |
| ==> default: debconf: unable to initialize frontend: Dialog | |
| ==> default: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) | |
| ==> default: debconf: falling back to frontend: Readline | |
| ==> default: debconf: unable to initialize frontend: Readline | |
| ==> default: debconf: (This frontend requires a controlling tty.) | |
| ==> default: debconf: falling back to frontend: Teletype | |
| ==> default: Processing triggers for ureadahead (0.100.0-16) ... | |
| ==> default: Setting up mongodb-org-server (2.6.4) ... | |
| ==> default: Adding system user `mongodb' (UID 111) ... | |
| ==> default: Adding new user `mongodb' (UID 111) with group `nogroup' ... | |
| ==> default: Not creating home directory `/home/mongodb'. | |
| ==> default: Adding group `mongodb' (GID 118) ... | |
| ==> default: Done. | |
| ==> default: Adding user `mongodb' to group `mongodb' ... | |
| ==> default: Adding user mongodb to group mongodb | |
| ==> default: Done. | |
| ==> default: mongod start/running, process 22343 | |
| ==> default: Setting up mongodb-org-mongos (2.6.4) ... | |
| ==> default: Setting up mongodb-org-tools (2.6.4) ... | |
| ==> default: Processing triggers for ureadahead (0.100.0-16) ... | |
| ==> default: Setting up mongodb-org (2.6.4) ... | |
| ==> default: mongod stop/waiting | |
| ==> default: mv: | |
| ==> default: cannot stat ‘/etc/mongodb.conf’ | |
| ==> default: : No such file or directory | |
| ==> default: mongod start/running, process 22391 | |
| ==> default: Waiting for MongoDB | |
| ==> default: MongoDB shell version: 2.6.4 | |
| ==> default: connecting to: test | |
| ==> default: switched to db hello_world | |
| ==> default: false | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 10000 }) | |
| ==> default: { "numIndexesBefore" : 1, "note" : "all indexes already exist", "ok" : 1 } | |
| ==> default: false | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 1 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 2 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 3 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 4 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 5 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 6 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 7 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 8 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 9 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 10 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 11 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 12 }) | |
| ==> default: { "numIndexesBefore" : 1, "note" : "all indexes already exist", "ok" : 1 } | |
| ==> default: switched to db hello_world | |
| ==> default: false | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 10000 }) | |
| ==> default: { "numIndexesBefore" : 1, "note" : "all indexes already exist", "ok" : 1 } | |
| ==> default: false | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 1 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 2 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 3 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 4 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 5 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 6 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 7 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 8 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 9 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 10 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 11 }) | |
| ==> default: WriteResult({ "nMatched" : 0, "nUpserted" : 1, "nModified" : 0, "_id" : 12 }) | |
| ==> default: { "numIndexesBefore" : 1, "note" : "all indexes already exist", "ok" : 1 } | |
| ==> default: bye |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment