Created
December 16, 2020 12:41
-
-
Save robimarko/86c954005da80d62f5726e96a756ab1b to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| root@OpenWrt:/# iw phy | |
| Wiphy phy1 | |
| wiphy index: 1 | |
| max # scan SSIDs: 16 | |
| max scan IEs length: 152 bytes | |
| max # sched scan SSIDs: 0 | |
| max # match sets: 0 | |
| Retry short limit: 7 | |
| Retry long limit: 4 | |
| Coverage class: 0 (up to 0m) | |
| Device supports RSN-IBSS. | |
| Device supports AP-side u-APSD. | |
| Supported Ciphers: | |
| * TKIP (00-0f-ac:2) | |
| * CCMP-128 (00-0f-ac:4) | |
| * CMAC (00-0f-ac:6) | |
| * CMAC-256 (00-0f-ac:13) | |
| * GMAC-128 (00-0f-ac:11) | |
| * GMAC-256 (00-0f-ac:12) | |
| * GCMP-128 (00-0f-ac:8) | |
| * GCMP-256 (00-0f-ac:9) | |
| * CCMP-256 (00-0f-ac:10) | |
| Available Antennas: TX 0x3 RX 0x3 | |
| Configured Antennas: TX 0x3 RX 0x3 | |
| Supported interface modes: | |
| * managed | |
| * AP | |
| * monitor | |
| * mesh point | |
| Band 1: | |
| Capabilities: 0x11e7 | |
| RX LDPC | |
| HT20/HT40 | |
| Dynamic SM Power Save | |
| RX HT20 SGI | |
| RX HT40 SGI | |
| TX STBC | |
| RX STBC 1-stream | |
| Max AMSDU length: 3839 bytes | |
| DSSS/CCK HT40 | |
| Maximum RX AMPDU length 65535 bytes (exponent: 0x003) | |
| Minimum RX AMPDU time spacing: No restriction (0x00) | |
| HT TX/RX MCS rate indexes supported: 0-15 | |
| HE Iftypes: Station | |
| HE MAC Capabilities (0x000b9a181040): | |
| +HTC HE Supported | |
| TWT Requester | |
| Dynamic BA Fragementation Level: 1 | |
| BSR | |
| Broadcast TWT | |
| OM Control | |
| Maximum A-MPDU Length Exponent: 3 | |
| RX Control Frame to MultiBSS | |
| A-MSDU in A-MPDU | |
| OM Control UL MU Data Disable RX | |
| HE PHY Capabilities: (0x02604c8907c1839c010c00): | |
| HE40/2.4GHz | |
| LDPC Coding in Payload | |
| HE SU PPDU with 1x HE-LTF and 0.8us GI | |
| STBC Tx <= 80MHz | |
| STBC Rx <= 80MHz | |
| Full Bandwidth UL MU-MIMO | |
| DCM Max Constellation: 1 | |
| DCM Max Constellation Rx: 1 | |
| SU Beamformer | |
| SU Beamformee | |
| MU Beamformer | |
| Beamformee STS <= 80Mhz: 1 | |
| Sounding Dimensions <= 80Mhz: 1 | |
| Ng = 16 SU Feedback | |
| Ng = 16 MU Feedback | |
| Codebook Size SU Feedback | |
| Codebook Size MU Feedback | |
| PPE Threshold Present | |
| HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI | |
| Max NC: 3 | |
| STBC Rx > 80MHz | |
| HE ER SU PPDU 4x HE-LTF 0.8us GI | |
| TX 1024-QAM | |
| RX 1024-QAM | |
| HE RX MCS and NSS set <= 80 MHz | |
| 1 streams: MCS 0-11 | |
| 2 streams: MCS 0-11 | |
| 3 streams: not supported | |
| 4 streams: not supported | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| HE TX MCS and NSS set <= 80 MHz | |
| 1 streams: MCS 0-11 | |
| 2 streams: MCS 0-11 | |
| 3 streams: not supported | |
| 4 streams: not supported | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| PPE Threshold 0x1b 0x1c 0xc7 0x71 0x1c 0xc7 0x71 | |
| HE Iftypes: AP | |
| HE MAC Capabilities (0x000d9a181040): | |
| +HTC HE Supported | |
| TWT Responder | |
| Dynamic BA Fragementation Level: 1 | |
| BSR | |
| Broadcast TWT | |
| OM Control | |
| Maximum A-MPDU Length Exponent: 3 | |
| RX Control Frame to MultiBSS | |
| A-MSDU in A-MPDU | |
| OM Control UL MU Data Disable RX | |
| HE PHY Capabilities: (0x02604c8807c1839c010c00): | |
| HE40/2.4GHz | |
| LDPC Coding in Payload | |
| HE SU PPDU with 1x HE-LTF and 0.8us GI | |
| STBC Tx <= 80MHz | |
| STBC Rx <= 80MHz | |
| Full Bandwidth UL MU-MIMO | |
| DCM Max Constellation Rx: 1 | |
| SU Beamformer | |
| SU Beamformee | |
| MU Beamformer | |
| Beamformee STS <= 80Mhz: 1 | |
| Sounding Dimensions <= 80Mhz: 1 | |
| Ng = 16 SU Feedback | |
| Ng = 16 MU Feedback | |
| Codebook Size SU Feedback | |
| Codebook Size MU Feedback | |
| PPE Threshold Present | |
| HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI | |
| Max NC: 3 | |
| STBC Rx > 80MHz | |
| HE ER SU PPDU 4x HE-LTF 0.8us GI | |
| TX 1024-QAM | |
| RX 1024-QAM | |
| HE RX MCS and NSS set <= 80 MHz | |
| 1 streams: MCS 0-11 | |
| 2 streams: MCS 0-11 | |
| 3 streams: not supported | |
| 4 streams: not supported | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| HE TX MCS and NSS set <= 80 MHz | |
| 1 streams: MCS 0-11 | |
| 2 streams: MCS 0-11 | |
| 3 streams: not supported | |
| 4 streams: not supported | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| PPE Threshold 0x1b 0x1c 0xc7 0x71 0x1c 0xc7 0x71 | |
| HE Iftypes: Mesh | |
| HE MAC Capabilities (0x00098a081040): | |
| +HTC HE Supported | |
| Dynamic BA Fragementation Level: 1 | |
| BSR | |
| OM Control | |
| Maximum A-MPDU Length Exponent: 1 | |
| RX Control Frame to MultiBSS | |
| A-MSDU in A-MPDU | |
| OM Control UL MU Data Disable RX | |
| HE PHY Capabilities: (0x02600c800541811c000000): | |
| HE40/2.4GHz | |
| LDPC Coding in Payload | |
| HE SU PPDU with 1x HE-LTF and 0.8us GI | |
| STBC Tx <= 80MHz | |
| STBC Rx <= 80MHz | |
| SU Beamformer | |
| SU Beamformee | |
| Beamformee STS <= 80Mhz: 1 | |
| Sounding Dimensions <= 80Mhz: 1 | |
| Ng = 16 SU Feedback | |
| Codebook Size SU Feedback | |
| PPE Threshold Present | |
| HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI | |
| Max NC: 3 | |
| HE RX MCS and NSS set <= 80 MHz | |
| 1 streams: MCS 0-11 | |
| 2 streams: MCS 0-11 | |
| 3 streams: not supported | |
| 4 streams: not supported | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| HE TX MCS and NSS set <= 80 MHz | |
| 1 streams: MCS 0-11 | |
| 2 streams: MCS 0-11 | |
| 3 streams: not supported | |
| 4 streams: not supported | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| PPE Threshold 0x1b 0x1c 0xc7 0x71 0x1c 0xc7 0x71 | |
| Bitrates (non-HT): | |
| * 1.0 Mbps | |
| * 2.0 Mbps (short preamble supported) | |
| * 5.5 Mbps (short preamble supported) | |
| * 11.0 Mbps (short preamble supported) | |
| * 6.0 Mbps | |
| * 9.0 Mbps | |
| * 12.0 Mbps | |
| * 18.0 Mbps | |
| * 24.0 Mbps | |
| * 36.0 Mbps | |
| * 48.0 Mbps | |
| * 54.0 Mbps | |
| Frequencies: | |
| * 2412 MHz [1] (30.0 dBm) | |
| * 2417 MHz [2] (30.0 dBm) | |
| * 2422 MHz [3] (30.0 dBm) | |
| * 2427 MHz [4] (30.0 dBm) | |
| * 2432 MHz [5] (30.0 dBm) | |
| * 2437 MHz [6] (30.0 dBm) | |
| * 2442 MHz [7] (30.0 dBm) | |
| * 2447 MHz [8] (30.0 dBm) | |
| * 2452 MHz [9] (30.0 dBm) | |
| * 2457 MHz [10] (30.0 dBm) | |
| * 2462 MHz [11] (30.0 dBm) | |
| * 2467 MHz [12] (disabled) | |
| * 2472 MHz [13] (disabled) | |
| * 2484 MHz [14] (disabled) | |
| Supported commands: | |
| * new_interface | |
| * set_interface | |
| * new_key | |
| * start_ap | |
| * new_station | |
| * new_mpath | |
| * set_mesh_config | |
| * set_bss | |
| * authenticate | |
| * associate | |
| * deauthenticate | |
| * disassociate | |
| * join_ibss | |
| * join_mesh | |
| * remain_on_channel | |
| * set_tx_bitrate_mask | |
| * frame | |
| * frame_wait_cancel | |
| * set_wiphy_netns | |
| * set_channel | |
| * set_wds_peer | |
| * probe_client | |
| * set_noack_map | |
| * register_beacons | |
| * start_p2p_device | |
| * set_mcast_rate | |
| * connect | |
| * disconnect | |
| * channel_switch | |
| * set_qos_map | |
| * set_multicast_to_unicast | |
| software interface modes (can always be added): | |
| * monitor | |
| valid interface combinations: | |
| * #{ managed } <= 1, #{ AP, mesh point } <= 16, | |
| total <= 16, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz } | |
| HT Capability overrides: | |
| * MCS: ff ff ff ff ff ff ff ff ff ff | |
| * maximum A-MSDU length | |
| * supported channel width | |
| * short GI for 40 MHz | |
| * max A-MPDU length exponent | |
| * min MPDU start spacing | |
| Device supports TX status socket option. | |
| Device supports HT-IBSS. | |
| Device supports SAE with AUTHENTICATE command | |
| Device supports scan flush. | |
| Device supports AP scan. | |
| Device supports per-vif TX power setting | |
| Driver supports full state transitions for AP/GO clients | |
| Driver supports a userspace MPM | |
| Driver/device bandwidth changes during BSS lifetime (AP/GO mode) | |
| Device supports static SMPS | |
| Device supports dynamic SMPS | |
| Device supports configuring vdev MAC-addr on create. | |
| max # scan plans: 1 | |
| max scan plan interval: -1 | |
| max scan plan iterations: 0 | |
| Supported TX frame types: | |
| * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| Supported RX frame types: | |
| * IBSS: 0x40 0xb0 0xc0 0xd0 | |
| * managed: 0x40 0xb0 0xd0 | |
| * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 | |
| * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 | |
| * mesh point: 0xb0 0xc0 0xd0 | |
| * P2P-client: 0x40 0xd0 | |
| * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 | |
| * P2P-device: 0x40 0xd0 | |
| Maximum associated stations in AP mode: 512 | |
| Supported extended features: | |
| * [ RRM ]: RRM | |
| * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records | |
| * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211 | |
| * [ STA_TX_PWR ]: TX power control per station | |
| * [ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support | |
| * [ SCAN_FREQ_KHZ ]: scan on kHz frequency support | |
| * [ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support | |
| Wiphy phy0 | |
| wiphy index: 0 | |
| max # scan SSIDs: 16 | |
| max scan IEs length: 142 bytes | |
| max # sched scan SSIDs: 0 | |
| max # match sets: 0 | |
| Retry short limit: 7 | |
| Retry long limit: 4 | |
| Coverage class: 0 (up to 0m) | |
| Device supports RSN-IBSS. | |
| Device supports AP-side u-APSD. | |
| Supported Ciphers: | |
| * TKIP (00-0f-ac:2) | |
| * CCMP-128 (00-0f-ac:4) | |
| * CMAC (00-0f-ac:6) | |
| * CMAC-256 (00-0f-ac:13) | |
| * GMAC-128 (00-0f-ac:11) | |
| * GMAC-256 (00-0f-ac:12) | |
| * GCMP-128 (00-0f-ac:8) | |
| * GCMP-256 (00-0f-ac:9) | |
| * CCMP-256 (00-0f-ac:10) | |
| Available Antennas: TX 0xf0 RX 0xf0 | |
| Configured Antennas: TX 0xf0 RX 0xf0 | |
| Supported interface modes: | |
| * managed | |
| * AP | |
| * monitor | |
| * mesh point | |
| Band 2: | |
| Capabilities: 0x19e7 | |
| RX LDPC | |
| HT20/HT40 | |
| Dynamic SM Power Save | |
| RX HT20 SGI | |
| RX HT40 SGI | |
| TX STBC | |
| RX STBC 1-stream | |
| Max AMSDU length: 7935 bytes | |
| DSSS/CCK HT40 | |
| Maximum RX AMPDU length 65535 bytes (exponent: 0x003) | |
| Minimum RX AMPDU time spacing: No restriction (0x00) | |
| HT TX/RX MCS rate indexes supported: 0-31 | |
| VHT Capabilities (0x739bf9b2): | |
| Max MPDU length: 11454 | |
| Supported Channel Width: neither 160 nor 80+80 | |
| RX LDPC | |
| short GI (80 MHz) | |
| TX STBC | |
| SU Beamformer | |
| SU Beamformee | |
| MU Beamformer | |
| MU Beamformee | |
| RX antenna pattern consistency | |
| TX antenna pattern consistency | |
| VHT RX MCS set: | |
| 1 streams: MCS 0-9 | |
| 2 streams: MCS 0-9 | |
| 3 streams: MCS 0-9 | |
| 4 streams: MCS 0-9 | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| VHT RX highest supported: 0 Mbps | |
| VHT TX MCS set: | |
| 1 streams: MCS 0-9 | |
| 2 streams: MCS 0-9 | |
| 3 streams: MCS 0-9 | |
| 4 streams: MCS 0-9 | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| VHT TX highest supported: 0 Mbps | |
| HE Iftypes: Station | |
| HE MAC Capabilities (0x000b9a181040): | |
| +HTC HE Supported | |
| TWT Requester | |
| Dynamic BA Fragementation Level: 1 | |
| BSR | |
| Broadcast TWT | |
| OM Control | |
| Maximum A-MPDU Length Exponent: 3 | |
| RX Control Frame to MultiBSS | |
| A-MSDU in A-MPDU | |
| OM Control UL MU Data Disable RX | |
| HE PHY Capabilities: (0x04604c890fc3839c010c00): | |
| HE40/HE80/5GHz | |
| LDPC Coding in Payload | |
| HE SU PPDU with 1x HE-LTF and 0.8us GI | |
| STBC Tx <= 80MHz | |
| STBC Rx <= 80MHz | |
| Full Bandwidth UL MU-MIMO | |
| DCM Max Constellation: 1 | |
| DCM Max Constellation Rx: 1 | |
| SU Beamformer | |
| SU Beamformee | |
| MU Beamformer | |
| Beamformee STS <= 80Mhz: 3 | |
| Sounding Dimensions <= 80Mhz: 3 | |
| Ng = 16 SU Feedback | |
| Ng = 16 MU Feedback | |
| Codebook Size SU Feedback | |
| Codebook Size MU Feedback | |
| PPE Threshold Present | |
| HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI | |
| Max NC: 3 | |
| STBC Rx > 80MHz | |
| HE ER SU PPDU 4x HE-LTF 0.8us GI | |
| TX 1024-QAM | |
| RX 1024-QAM | |
| HE RX MCS and NSS set <= 80 MHz | |
| 1 streams: MCS 0-11 | |
| 2 streams: MCS 0-11 | |
| 3 streams: MCS 0-11 | |
| 4 streams: MCS 0-11 | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| HE TX MCS and NSS set <= 80 MHz | |
| 1 streams: MCS 0-11 | |
| 2 streams: MCS 0-11 | |
| 3 streams: MCS 0-11 | |
| 4 streams: MCS 0-11 | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| PPE Threshold 0x7f 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 | |
| HE Iftypes: AP | |
| HE MAC Capabilities (0x000d9a181040): | |
| +HTC HE Supported | |
| TWT Responder | |
| Dynamic BA Fragementation Level: 1 | |
| BSR | |
| Broadcast TWT | |
| OM Control | |
| Maximum A-MPDU Length Exponent: 3 | |
| RX Control Frame to MultiBSS | |
| A-MSDU in A-MPDU | |
| OM Control UL MU Data Disable RX | |
| HE PHY Capabilities: (0x04604c880fc3839c010c00): | |
| HE40/HE80/5GHz | |
| LDPC Coding in Payload | |
| HE SU PPDU with 1x HE-LTF and 0.8us GI | |
| STBC Tx <= 80MHz | |
| STBC Rx <= 80MHz | |
| Full Bandwidth UL MU-MIMO | |
| DCM Max Constellation Rx: 1 | |
| SU Beamformer | |
| SU Beamformee | |
| MU Beamformer | |
| Beamformee STS <= 80Mhz: 3 | |
| Sounding Dimensions <= 80Mhz: 3 | |
| Ng = 16 SU Feedback | |
| Ng = 16 MU Feedback | |
| Codebook Size SU Feedback | |
| Codebook Size MU Feedback | |
| PPE Threshold Present | |
| HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI | |
| Max NC: 3 | |
| STBC Rx > 80MHz | |
| HE ER SU PPDU 4x HE-LTF 0.8us GI | |
| TX 1024-QAM | |
| RX 1024-QAM | |
| HE RX MCS and NSS set <= 80 MHz | |
| 1 streams: MCS 0-11 | |
| 2 streams: MCS 0-11 | |
| 3 streams: MCS 0-11 | |
| 4 streams: MCS 0-11 | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| HE TX MCS and NSS set <= 80 MHz | |
| 1 streams: MCS 0-11 | |
| 2 streams: MCS 0-11 | |
| 3 streams: MCS 0-11 | |
| 4 streams: MCS 0-11 | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| PPE Threshold 0x7f 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 | |
| HE Iftypes: Mesh | |
| HE MAC Capabilities (0x00098a081040): | |
| +HTC HE Supported | |
| Dynamic BA Fragementation Level: 1 | |
| BSR | |
| OM Control | |
| Maximum A-MPDU Length Exponent: 1 | |
| RX Control Frame to MultiBSS | |
| A-MSDU in A-MPDU | |
| OM Control UL MU Data Disable RX | |
| HE PHY Capabilities: (0x04600c800d43811c000000): | |
| HE40/HE80/5GHz | |
| LDPC Coding in Payload | |
| HE SU PPDU with 1x HE-LTF and 0.8us GI | |
| STBC Tx <= 80MHz | |
| STBC Rx <= 80MHz | |
| SU Beamformer | |
| SU Beamformee | |
| Beamformee STS <= 80Mhz: 3 | |
| Sounding Dimensions <= 80Mhz: 3 | |
| Ng = 16 SU Feedback | |
| Codebook Size SU Feedback | |
| PPE Threshold Present | |
| HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI | |
| Max NC: 3 | |
| HE RX MCS and NSS set <= 80 MHz | |
| 1 streams: MCS 0-11 | |
| 2 streams: MCS 0-11 | |
| 3 streams: MCS 0-11 | |
| 4 streams: MCS 0-11 | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| HE TX MCS and NSS set <= 80 MHz | |
| 1 streams: MCS 0-11 | |
| 2 streams: MCS 0-11 | |
| 3 streams: MCS 0-11 | |
| 4 streams: MCS 0-11 | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| PPE Threshold 0x7f 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 0x1c 0xc7 0x71 | |
| Bitrates (non-HT): | |
| * 6.0 Mbps | |
| * 9.0 Mbps | |
| * 12.0 Mbps | |
| * 18.0 Mbps | |
| * 24.0 Mbps | |
| * 36.0 Mbps | |
| * 48.0 Mbps | |
| * 54.0 Mbps | |
| Frequencies: | |
| * 5180 MHz [36] (30.0 dBm) | |
| * 5200 MHz [40] (30.0 dBm) | |
| * 5220 MHz [44] (30.0 dBm) | |
| * 5240 MHz [48] (30.0 dBm) | |
| * 5260 MHz [52] (24.0 dBm) (radar detection) | |
| * 5280 MHz [56] (24.0 dBm) (radar detection) | |
| * 5300 MHz [60] (24.0 dBm) (radar detection) | |
| * 5320 MHz [64] (24.0 dBm) (radar detection) | |
| * 5500 MHz [100] (24.0 dBm) (radar detection) | |
| * 5520 MHz [104] (24.0 dBm) (radar detection) | |
| * 5540 MHz [108] (24.0 dBm) (radar detection) | |
| * 5560 MHz [112] (24.0 dBm) (radar detection) | |
| * 5580 MHz [116] (24.0 dBm) (radar detection) | |
| * 5600 MHz [120] (24.0 dBm) (radar detection) | |
| * 5620 MHz [124] (24.0 dBm) (radar detection) | |
| * 5640 MHz [128] (24.0 dBm) (radar detection) | |
| * 5660 MHz [132] (24.0 dBm) (radar detection) | |
| * 5680 MHz [136] (24.0 dBm) (radar detection) | |
| * 5700 MHz [140] (24.0 dBm) (radar detection) | |
| * 5720 MHz [144] (24.0 dBm) (radar detection) | |
| * 5745 MHz [149] (30.0 dBm) | |
| * 5765 MHz [153] (30.0 dBm) | |
| * 5785 MHz [157] (30.0 dBm) | |
| * 5805 MHz [161] (30.0 dBm) | |
| * 5825 MHz [165] (30.0 dBm) | |
| * 5845 MHz [169] (disabled) | |
| * 5865 MHz [173] (disabled) | |
| Supported commands: | |
| * new_interface | |
| * set_interface | |
| * new_key | |
| * start_ap | |
| * new_station | |
| * new_mpath | |
| * set_mesh_config | |
| * set_bss | |
| * authenticate | |
| * associate | |
| * deauthenticate | |
| * disassociate | |
| * join_ibss | |
| * join_mesh | |
| * remain_on_channel | |
| * set_tx_bitrate_mask | |
| * frame | |
| * frame_wait_cancel | |
| * set_wiphy_netns | |
| * set_channel | |
| * set_wds_peer | |
| * probe_client | |
| * set_noack_map | |
| * register_beacons | |
| * start_p2p_device | |
| * set_mcast_rate | |
| * connect | |
| * disconnect | |
| * channel_switch | |
| * set_qos_map | |
| * set_multicast_to_unicast | |
| software interface modes (can always be added): | |
| * monitor | |
| valid interface combinations: | |
| * #{ managed } <= 1, #{ AP, mesh point } <= 16, | |
| total <= 16, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz } | |
| HT Capability overrides: | |
| * MCS: ff ff ff ff ff ff ff ff ff ff | |
| * maximum A-MSDU length | |
| * supported channel width | |
| * short GI for 40 MHz | |
| * max A-MPDU length exponent | |
| * min MPDU start spacing | |
| Device supports TX status socket option. | |
| Device supports HT-IBSS. | |
| Device supports SAE with AUTHENTICATE command | |
| Device supports scan flush. | |
| Device supports AP scan. | |
| Device supports per-vif TX power setting | |
| Driver supports full state transitions for AP/GO clients | |
| Driver supports a userspace MPM | |
| Driver/device bandwidth changes during BSS lifetime (AP/GO mode) | |
| Device supports static SMPS | |
| Device supports dynamic SMPS | |
| Device supports configuring vdev MAC-addr on create. | |
| max # scan plans: 1 | |
| max scan plan interval: -1 | |
| max scan plan iterations: 0 | |
| Supported TX frame types: | |
| * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| Supported RX frame types: | |
| * IBSS: 0x40 0xb0 0xc0 0xd0 | |
| * managed: 0x40 0xb0 0xd0 | |
| * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 | |
| * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 | |
| * mesh point: 0xb0 0xc0 0xd0 | |
| * P2P-client: 0x40 0xd0 | |
| * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 | |
| * P2P-device: 0x40 0xd0 | |
| Maximum associated stations in AP mode: 512 | |
| Supported extended features: | |
| * [ RRM ]: RRM | |
| * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records | |
| * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211 | |
| * [ STA_TX_PWR ]: TX power control per station | |
| * [ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support | |
| * [ SCAN_FREQ_KHZ ]: scan on kHz frequency support | |
| * [ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment