Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
Jalapeno
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00085
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Core 0 Frequency, 0 MHz
B - 261 - PBL, Start
B - 1338 - bootable_media_detect_entry, Start
B - 1678 - bootable_media_detect_success, Start
B - 1692 - elf_loader_entry, Start
B - 5069 - auth_hash_seg_entry, Start
B - 7211 - auth_hash_seg_exit, Start
B - 570973 - elf_segs_hash_verify_entry, Start
B - 685674 - PBL, End
B - 685697 - SBL1, Start
B - 774186 - pm_device_init, Start
D - 6 - pm_device_init, Delta
B - 775632 - boot_flash_init, Start
D - 65612 - boot_flash_init, Delta
B - 845419 - boot_config_data_table_init, Start
D - 3814 - boot_config_data_table_init, Delta - (419 Bytes)
B - 852624 - clock_init, Start
D - 7578 - clock_init, Delta
B - 864728 - CDT version:2,Platform ID:9,Major ID:0,Minor ID:0,Subtype:2
B - 868224 - sbl1_ddr_set_params, Start
B - 873218 - cpr_init, Start
D - 2 - cpr_init, Delta
B - 877606 - Pre_DDR_clock_init, Start
D - 4 - Pre_DDR_clock_init, Delta
D - 13161 - sbl1_ddr_set_params, Delta
B - 891447 - pm_driver_init, Start
D - 2 - pm_driver_init, Delta
B - 961083 - sbl1_wait_for_ddr_training, Start
D - 29 - sbl1_wait_for_ddr_training, Delta
B - 976868 - Image Load, Start
D - 135302 - QSEE Image Loaded, Delta - (261824 Bytes)
B - 1112674 - Image Load, Start
D - 1451 - SEC Image Loaded, Delta - (2048 Bytes)
B - 1122836 - Image Load, Start
D - 208258 - APPSBL Image Loaded, Delta - (424971 Bytes)
B - 1331521 - QSEE Execution, Start
D - 69 - QSEE Execution, Delta
B - 1337700 - SBL1, End
D - 654115 - SBL1, Delta
S - Flash Throughput, 1998 KB/s (689262 Bytes, 344806 us)
S - DDR Frequency, 533 MHz
U-Boot 2012.07 [ 2.0.0,1004] (Sep 01 2017 - 15:26:05)
smem ram ptable found: ver: 1 len: 3
DRAM: 256 MiB
machid : 0x9000002
NAND: spi_nand: spi_nand_flash_probe SF NAND ID 0:ef:aa:21
SF: Detected W25N01GV with page size 2 KiB, total 128 MiB
SF: Detected W25Q64 with page size 4 KiB, total 8 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x800000
136 MiB
MMC:
In: serial
Out: serial
Err: serial
machid: 9000002
flash_type: 0
Net: MAC0 addr:c4:93:0:f:30:cd
PHY ID1: 0x4d
PHY ID2: 0xd0b2
ipq40xx_ess_sw_init done
eth0
Hit any key to stop autoboot: 0
(IPQ40xx) # set serverip 192.168.2.213
(IPQ40xx) # tftpboot 0x84000000 openwrt-ipq806x-8dev_jalapeno-initramfs-fit-uImage.itb
eth0 PHY0 Down Speed :10 Half duplex
eth0 PHY1 Down Speed :10 Half duplex
eth0 PHY2 Down Speed :10 Half duplex
eth0 PHY3 up Speed :1000 Full duplex
eth0 PHY4 Down Speed :10 Half duplex
Using eth0 device
TFTP from server 192.168.2.213; our IP address is 192.168.2.100
Filename 'openwrt-ipq806x-8dev_jalapeno-initramfs-fit-uImage.itb'.
Load address: 0x84000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##
done
Bytes transferred = 6330916 (609a24 hex)
(IPQ40xx) # bootm 0x84000000
## Booting kernel from FIT Image at 84000000 ...
Using 'config@ap.jalapeno-v2' configuration
Trying 'kernel@1' kernel subimage
Description: ARM OpenWrt Linux-4.9.76
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x840000e4
Data Size: 6296988 Bytes = 6 MiB
Architecture: ARM
OS: Linux
Load Address: 0x80208000
Entry Point: 0x80208000
Hash algo: crc32
Hash value: 06e12675
Hash algo: sha1
Hash value: 0254e24321d7f30f3ee395e87f2230e5204957a8
Verifying Hash Integrity ... crc32+ sha1+ OK
## Flattened Device Tree from FIT Image at 84000000
Using 'config@ap.jalapeno-v2' configuration
Trying 'fdt@1' FDT blob subimage
Description: ARM OpenWrt 8dev_jalapeno device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x846017b8
Data Size: 32558 Bytes = 31.8 KiB
Architecture: ARM
Hash algo: crc32
Hash value: f0ea9a36
Hash algo: sha1
Hash value: 18c262b389bee5261060134e0266134890c67cfc
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x846017b8
Uncompressing Kernel Image ... OK
Loading Device Tree to 871e4000, end 871eef2d ... OK
Using machid 0x9000002 from environment
Starting kernel ...
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment