lexmark-blog1-1.txt

Si Ge2-RevB 3.3.22-9h 12 14 25
TIME=Tue Mar 10 21:02:36 2020;COMMIT=863d60b


uidc
Failure Enabling AVS workaround on 88PG870
setting AVS Voltage to 1050
Bank5 Reg2 = 0x0000381E, VoltBin = 0, efuseEscape = 0
AVS efuse Values:
                                Efuse Programed = 1
                                Low VDD Limit = 32
                                High VDD Limit = 32
                                Target DRO = 65535
                                Select Vsense0 = 0
a
Calling Configure_Flashes @ 0xFFE010A8 12 FE 13 E0026800
fves
DDR3 400MHz 1x16 4Gbit
rSHA compare Passed 0
SHA compare Passed 0
l
Launch AP Core0 @ 0x00100000


U-Boot 2018.07-AUTOINC+761a3261e9 (Feb 28 2020 - 23:26:43 +0000)

DRAM:  512 MiB
NAND:  256 MiB
MMC:   mv_sdh: 0, mv_sdh: 1, mv_sdh: 2
lxk_gen2_eeprom_probe:123: No panel eeprom option found.
lxk_panel_notouch_probe_gen2:283: panel uicc type 68, hw vers 19, panel id 98, display type 11, firmware v4.5, lvds 4
found smpn display TM024HDH49 / ILI9341 default
lcd_lvds_pll_init: Requesting dotclk=40000000Hz
found smpn display Yeebo 2.8 B
ubi0: default fastmap pool size: 100
ubi0: default fastmap WL pool size: 50
ubi0: attaching mtd1
ubi0: attached by fastmap
ubi0: fastmap pool size: 100
ubi0: fastmap WL pool size: 50
ubi0: attached mtd1 (name "mtd=1", size 253 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 2018, bad PEBs: 8, corrupted PEBs: 0
ubi0: user volume: 7, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
ubi0: available PEBs: 0, total reserved PEBs: 2018, PEBs reserved for bad PEB handling: 32
Loading file '/shared/pm/softoff' to addr 0x1f6545d4...
Unmounting UBIFS volume InternalStorage!
Card did not respond to voltage select!
bootcmd: setenv cramfsaddr 0x1e900000;ubi read 0x1e900000 Kernel 0xa67208;sha256verify 0x1e900000 0x1f367000 1;cramfsload 0x100000 /main.img;source 0x100000;loop.l 0xd0000000 1
Read 10908168 bytes from volume Kernel to 1e900000
Code authentication success
### CRAMFS load complete: 2165 bytes loaded to 0x100000
## Executing script at 00100000
### CRAMFS load complete: 4773416 bytes loaded to 0xa00000
### CRAMFS load complete: 4331046 bytes loaded to 0x1600000
## Booting kernel from Legacy Image at 00a00000 ...
   Image Name:   Linux-4.17.19-yocto-standard-74b
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4773352 Bytes = 4.6 MiB
   Load Address: 00008000
   Entry Point:  00008000
## Loading init Ramdisk from Legacy Image at 01600000 ...
   Image Name:   initramfs-image-granite2-2020063
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    4330982 Bytes = 4.1 MiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 01500000
   Booting using the fdt blob at 0x1500000
   Loading Kernel Image ... OK
   Using Device Tree in place at 01500000, end 01516aff
UPDATING DEVICE TREE WITH st:1fec4000 sz: 12c000

Starting kernel ...

Booting Linux on physical CPU 0xffff00
Linux version 4.17.19-yocto-standard-74b7175b2a3452f756ffa76f750e50db (oe-user@oe-host) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Mon Jun 29 19:46:01 UTC 2020
CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=30c5383d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt: Machine model: mv6220 Lionfish 00d L
earlycon: early_pxa0 at MMIO32 0x00000000d4030000 (options '')
bootconsole [early_pxa0] enabled
FIX ignoring exception 0xa11 addr=fb7ffffe swapper/0:1
...