lexmark-blog1-3.txt

Si Ge2-RevB 3.3.22-9h 12 14 25
TIME=Tue Jun 08 20:32:27 2021;COMMIT=863d60b


uidc
Failure Enabling AVS workaround on 88PG870
setting AVS Voltage to 1050
Bank5 Reg2 = 0x000038E4, VoltBin = 0, efuseEscape = 0
AVS efuse Values:
                                Efuse Programed = 1
                                Low VDD Limit = 31
                                High VDD Limit = 31
                                Target DRO = 65535
                                Select Vsense0 = 0
a
Calling Configure_Flashes @ 0xFFE010A8 12 FE 13 E0026800
fves
DDR3 400MHz 1x16 4Gbit
rSHA compare Passed 0
SHA compare Passed 0
l
Launch AP Core0 @ 0x00100000


U-Boot 2018.07-AUTOINC+761a3261e9 (Jun 08 2021 - 20:32:14 +0000)

DRAM:  512 MiB
NAND:  256 MiB
MMC:   mv_sdh: 0, mv_sdh: 1, mv_sdh: 2
lxk_gen2_eeprom_probe:123: No panel eeprom option found.
lxk_panel_notouch_probe_gen2:283: panel uicc type 68, hw vers 19, panel id 98, display type 11, firmware v4.5, lvds 4
found smpn display TM024HDH49 / ILI9341 default
lcd_lvds_pll_init: Requesting dotclk=40000000Hz
found smpn display Yeebo 2.8 B
ubi0: default fastmap pool size: 100
ubi0: default fastmap WL pool size: 50
ubi0: attaching mtd1
ubi0: attached by fastmap
ubi0: fastmap pool size: 100
ubi0: fastmap WL pool size: 50
ubi0: attached mtd1 (name "mtd=1", size 253 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 2018, bad PEBs: 8, corrupted PEBs: 0
ubi0: user volume: 7, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 0
ubi0: available PEBs: 0, total reserved PEBs: 2018, PEBs reserved for bad PEB handling: 32
Loading file '/shared/pm/softoff' to addr 0x1f6545d4...
Unmounting UBIFS volume InternalStorage!
Card did not respond to voltage select!
bootcmd: setenv cramfsaddr 0x1e800000;ubi read 0x1e800000 Kernel 0xb63208;sha256verify 0x1e800000 0x1f363000 1;cramfsload 0x100000 /main.img;source 0x100000;loop.l 0xd0000000 1
Read 11940360 bytes from volume Kernel to 1e800000
Code authentication success
### CRAMFS load complete: 2165 bytes loaded to 0x100000
## Executing script at 00100000
### CRAMFS load complete: 4773552 bytes loaded to 0xa00000
### CRAMFS load complete: 5123782 bytes loaded to 0x1600000
## Booting kernel from Legacy Image at 00a00000 ...
   Image Name:   Linux-4.17.19-yocto-standard-2f4
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4773488 Bytes = 4.6 MiB
   Load Address: 00008000
   Entry Point:  00008000
## Loading init Ramdisk from Legacy Image at 01600000 ...
   Image Name:   initramfs-image-granite2-2021061
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    5123718 Bytes = 4.9 MiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 01500000
   Booting using the fdt blob at 0x1500000
   Loading Kernel Image ... OK
   Using Device Tree in place at 01500000, end 01516b28
UPDATING DEVICE TREE WITH st:1fec4000 sz: 12c000

Starting kernel ...

Booting Linux on physical CPU 0xffff00
Linux version 4.17.19-yocto-standard-2f4d6903b333a60c46f1f33da4b122d1 (oe-user@oe-host) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Thu Jun 10 20:19:42 UTC 2021
CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=30c5383d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt: Machine model: mv6220 Lionfish 00d L
earlycon: early_pxa0 at MMIO32 0x00000000d4030000 (options '')
bootconsole [early_pxa0] enabled
FIX ignoring exception 0xa11 addr=a7ff7dfe swapper/0:1

starting version 237
mount: mounting /dev/active-partitions/Base on /newrootfs failed: No such file or directory
Unknown device, --name=, --path=, or absolute path in /dev/ or /sys expected.
mount: mounting /dev/active-partitions/Base on /newrootfs failed: No such file or directory
mount: mounting /dev/active-partitions/Base on /newrootfs failed: No such file or directory
mount: mounting /dev on /newrootfs/dev failed: No such file or directory
mount: mounting /tmp on /newrootfs/var failed: No such file or directory
ln: /newrootfs/var/dev: No such file or directory
BusyBox v1.27.2 (2021-03-11 21:59:45 UTC) multi-call binary.

Usage: switch_root [-c /dev/console] NEW_ROOT NEW_INIT [ARGS]

Free initramfs and switch to another root fs:
chroot to NEW_ROOT, delete all in /, move NEW_ROOT to /,
execute NEW_INIT. PID must be 1. NEW_ROOT must be a mountpoint.

        -c DEV  Reopen stdio to DEV after switch
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100

CPU: 1 PID: 1 Comm: switch_root Tainted: P           O      4.17.19-yocto-standard-2f4d6903b333a60c46f1f33da4b122d1 #1
Hardware name: Marvell Pegmatite (Device Tree)
[<c001b3fc>] (unwind_backtrace) from [<c0015b7c>] (show_stack+0x20/0x24)
[<c0015b7c>] (show_stack) from [<c0637468>] (dump_stack+0x78/0x94)
[<c0637468>] (dump_stack) from [<c002f238>] (panic+0xe8/0x27c)
[<c002f238>] (panic) from [<c0034314>] (do_exit+0x61c/0xa6c)
[<c0034314>] (do_exit) from [<c0034818>] (do_group_exit+0x68/0xd0)
[<c0034818>] (do_group_exit) from [<c00348a0>] (__wake_up_parent+0x0/0x30)
[<c00348a0>] (__wake_up_parent) from [<c0009000>] (ret_fast_syscall+0x0/0x50)
Exception stack(0xd2e2dfa8 to 0xd2e2dff0)
dfa0:                   480faba0 480faba0 00000001 00000000 00000001 00000001
dfc0: 480faba0 480faba0 00000000 000000f8 00000001 00000000 480ff780 480fc4d0
dfe0: 47faf908 beaa2b74 47fee90c 4805aac4
pegmatite_wdt: set TTCR: 15000
pegmatite_wdt: set APS_TMR_WMR: 6912
CPU0: stopping
CPU: 0 PID: 0 Comm: swapper/0 Tainted: P           O      4.17.19-yocto-standard-2f4d6903b333a60c46f1f33da4b122d1 #1
Hardware name: Marvell Pegmatite (Device Tree)
[<c001b3fc>] (unwind_backtrace) from [<c0015b7c>] (show_stack+0x20/0x24)
[<c0015b7c>] (show_stack) from [<c0637468>] (dump_stack+0x78/0x94)
[<c0637468>] (dump_stack) from [<c001913c>] (handle_IPI+0x230/0x338)
[<c001913c>] (handle_IPI) from [<c000a218>] (gic_handle_irq+0xe4/0xfc)
[<c000a218>] (gic_handle_irq) from [<c00099f8>] (__irq_svc+0x58/0x8c)
Exception stack(0xc0999e68 to 0xc0999eb0)
9e60:                   00000000 c09f70a4 00000001 00000050 c09f70a4 c09f6f14
9e80: 00000005 c0a09cb4 dfe16598 00000005 00000005 c0999f04 c0999eb8 c0999eb8
9ea0: c0503684 c0503690 60000113 ffffffff
[<c00099f8>] (__irq_svc) from [<c0503690>] (cpuidle_enter_state+0x2bc/0x3a8)
[<c0503690>] (cpuidle_enter_state) from [<c05037f0>] (cpuidle_enter+0x48/0x4c)
[<c05037f0>] (cpuidle_enter) from [<c005f0e4>] (call_cpuidle+0x44/0x48)
[<c005f0e4>] (call_cpuidle) from [<c005f4a0>] (do_idle+0x1e0/0x270)
[<c005f4a0>] (do_idle) from [<c005f7f8>] (cpu_startup_entry+0x28/0x30)
[<c005f7f8>] (cpu_startup_entry) from [<c064bd54>] (rest_init+0xc0/0xe0)
[<c064bd54>] (rest_init) from [<c0913f40>] (start_kernel+0x418/0x4bc)
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 ]---