Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
AWS EBS NVMe udev rules
# Copyright (C) 2006-2016 Amazon.com, Inc. or its affiliates.
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License").
# You may not use this file except in compliance with the License.
# A copy of the License is located at
#
# http://aws.amazon.com/apache2.0/
#
# or in the "license" file accompanying this file. This file is
# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS
# OF ANY KIND, either express or implied. See the License for the
# specific language governing permissions and limitations under the
# License.
#nvme-ns-* devices
KERNEL=="nvme[0-9]*n[0-9]*", ENV{DEVTYPE}=="disk", ATTRS{serial}=="?*", ATTRS{model}=="?*", SYMLINK+="disk/by-id/nvme-$attr{model}_$attr{serial}-ns-%n", OPTIONS+="string_escape=replace"
#nvme partitions
KERNEL=="nvme[0-9]*n[0-9]*p[0-9]*", ENV{DEVTYPE}=="partition", ATTRS{serial}=="?*", ATTRS{model}=="?*", IMPORT{program}="ec2nvme-nsid %k"
KERNEL=="nvme[0-9]*n[0-9]*p[0-9]*", ENV{DEVTYPE}=="partition", ATTRS{serial}=="?*", ATTRS{model}=="?*", ENV{_NS_ID}=="?*", SYMLINK+="disk/by-id/nvme-$attr{model}_$attr{serial}-ns-$env{_NS_ID}-part%n", OPTIONS+="string_escape=replace"
# ebs nvme devices
KERNEL=="nvme[0-9]*n[0-9]*", ENV{DEVTYPE}=="disk", ATTRS{model}=="Amazon Elastic Block Store", PROGRAM="/sbin/ebsnvme-id -u /dev/%k", SYMLINK+="%c"
#!/usr/bin/env python2.7
# Copyright (C) 2017 Amazon.com, Inc. or its affiliates.
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License").
# You may not use this file except in compliance with the License.
# A copy of the License is located at
#
# http://aws.amazon.com/apache2.0/
#
# or in the "license" file accompanying this file. This file is
# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS
# OF ANY KIND, either express or implied. See the License for the
# specific language governing permissions and limitations under the
# License.
"""
Usage:
Read EBS device information and provide information about
the volume.
"""
import argparse
from ctypes import *
from fcntl import ioctl
import sys
NVME_ADMIN_IDENTIFY = 0x06
NVME_IOCTL_ADMIN_CMD = 0xC0484E41
AMZN_NVME_VID = 0x1D0F
AMZN_NVME_EBS_MN = "Amazon Elastic Block Store"
class nvme_admin_command(Structure):
_pack_ = 1
_fields_ = [("opcode", c_uint8), # op code
("flags", c_uint8), # fused operation
("cid", c_uint16), # command id
("nsid", c_uint32), # namespace id
("reserved0", c_uint64),
("mptr", c_uint64), # metadata pointer
("addr", c_uint64), # data pointer
("mlen", c_uint32), # metadata length
("alen", c_uint32), # data length
("cdw10", c_uint32),
("cdw11", c_uint32),
("cdw12", c_uint32),
("cdw13", c_uint32),
("cdw14", c_uint32),
("cdw15", c_uint32),
("reserved1", c_uint64)]
class nvme_identify_controller_amzn_vs(Structure):
_pack_ = 1
_fields_ = [("bdev", c_char * 32), # block device name
("reserved0", c_char * (1024 - 32))]
class nvme_identify_controller_psd(Structure):
_pack_ = 1
_fields_ = [("mp", c_uint16), # maximum power
("reserved0", c_uint16),
("enlat", c_uint32), # entry latency
("exlat", c_uint32), # exit latency
("rrt", c_uint8), # relative read throughput
("rrl", c_uint8), # relative read latency
("rwt", c_uint8), # relative write throughput
("rwl", c_uint8), # relative write latency
("reserved1", c_char * 16)]
class nvme_identify_controller(Structure):
_pack_ = 1
_fields_ = [("vid", c_uint16), # PCI Vendor ID
("ssvid", c_uint16), # PCI Subsystem Vendor ID
("sn", c_char * 20), # Serial Number
("mn", c_char * 40), # Module Number
("fr", c_char * 8), # Firmware Revision
("rab", c_uint8), # Recommend Arbitration Burst
("ieee", c_uint8 * 3), # IEEE OUI Identifier
("mic", c_uint8), # Multi-Interface Capabilities
("mdts", c_uint8), # Maximum Data Transfer Size
("reserved0", c_uint8 * (256 - 78)),
("oacs", c_uint16), # Optional Admin Command Support
("acl", c_uint8), # Abort Command Limit
("aerl", c_uint8), # Asynchronous Event Request Limit
("frmw", c_uint8), # Firmware Updates
("lpa", c_uint8), # Log Page Attributes
("elpe", c_uint8), # Error Log Page Entries
("npss", c_uint8), # Number of Power States Support
("avscc", c_uint8), # Admin Vendor Specific Command Configuration
("reserved1", c_uint8 * (512 - 265)),
("sqes", c_uint8), # Submission Queue Entry Size
("cqes", c_uint8), # Completion Queue Entry Size
("reserved2", c_uint16),
("nn", c_uint32), # Number of Namespaces
("oncs", c_uint16), # Optional NVM Command Support
("fuses", c_uint16), # Fused Operation Support
("fna", c_uint8), # Format NVM Attributes
("vwc", c_uint8), # Volatile Write Cache
("awun", c_uint16), # Atomic Write Unit Normal
("awupf", c_uint16), # Atomic Write Unit Power Fail
("nvscc", c_uint8), # NVM Vendor Specific Command Configuration
("reserved3", c_uint8 * (704 - 531)),
("reserved4", c_uint8 * (2048 - 704)),
("psd", nvme_identify_controller_psd * 32), # Power State Descriptor
("vs", nvme_identify_controller_amzn_vs)] # Vendor Specific
class ebs_nvme_device:
def __init__(self, device):
self.device = device
self.ctrl_identify()
def _nvme_ioctl(self, id_response, id_len):
admin_cmd = nvme_admin_command(opcode = NVME_ADMIN_IDENTIFY,
addr = id_response,
alen = id_len,
cdw10 = 1)
with open(self.device, "rw") as nvme:
ioctl(nvme, NVME_IOCTL_ADMIN_CMD, admin_cmd)
def ctrl_identify(self):
self.id_ctrl = nvme_identify_controller()
self._nvme_ioctl(addressof(self.id_ctrl), sizeof(self.id_ctrl))
if self.id_ctrl.vid != AMZN_NVME_VID or self.id_ctrl.mn.strip() != AMZN_NVME_EBS_MN:
raise TypeError("[ERROR] Not an EBS device: '{0}'".format(self.device))
def get_volume_id(self):
vol = self.id_ctrl.sn
if vol.startswith("vol") and vol[3] != "-":
vol = "vol-" + vol[3:]
return vol
def get_block_device(self, stripped=False):
dev = self.id_ctrl.vs.bdev
if stripped and dev.startswith("/dev/"):
dev = dev[5:]
return dev
if __name__ == "__main__":
parser = argparse.ArgumentParser(description="Reads EBS information from NVMe devices.")
parser.add_argument("device", nargs=1, help="Device to query")
display = parser.add_argument_group("Display Options")
display.add_argument("-v", "--volume", action="store_true",
help="Return volume-id")
display.add_argument("-b", "--block-dev", action="store_true",
help="Return block device mapping")
display.add_argument("-u", "--udev", action="store_true",
help="Output data in format suitable for udev rules")
if len(sys.argv) < 2:
parser.print_help()
sys.exit(1)
args = parser.parse_args()
get_all = not (args.udev or args.volume or args.block_dev)
try:
dev = ebs_nvme_device(args.device[0])
except (IOError, TypeError) as err:
print >> sys.stderr, err
sys.exit(1)
if get_all or args.volume:
print "Volume ID: {0}".format(dev.get_volume_id())
if get_all or args.block_dev or args.udev:
print dev.get_block_device(args.udev)
#!/bin/bash
# Copyright (C) 2006-2016 Amazon.com, Inc. or its affiliates.
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License").
# You may not use this file except in compliance with the License.
# A copy of the License is located at
#
# http://aws.amazon.com/apache2.0/
#
# or in the "license" file accompanying this file. This file is
# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS
# OF ANY KIND, either express or implied. See the License for the
# specific language governing permissions and limitations under the
# License.
#Expected input if partition's kernel name like nvme0n1p2
if [ $# -eq 0 ] ; then
exit 1
else
# extract ns id from partition's kernel name and export it
NSID=$(echo -n "$@" | cut -f 3 -d 'n' | cut -f 1 -d 'p')
echo "_NS_ID=${NSID}"
fi
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.