Skip to content

Instantly share code, notes, and snippets.

What would you like to do?
Duovero FreeBSD boot log
U-Boot SPL 2014.10 (Jan 19 2015 - 06:24:50)
OMAP4430 ES2.3
reading u-boot.img
reading u-boot.img
U-Boot 2014.10 (Jan 19 2015 - 06:24:50)
CPU : OMAP4430 ES2.3
Board: duovero
I2C: ready
WARNING: Caches not enabled
reading u-boot.env
** Unable to read "u-boot.env" from mmc0:1 **
Using default environment
Net: smc911x-0
Warning: smc911x-0 using MAC address from net device
reading uEnv.txt
** Unable to read file uEnv.txt **
Hit any key to stop autoboot: 0
Booting from: mmc 0 ubldr
reading ubldr
262358 bytes read in 26 ms (9.6 MiB/s)
## Starting application at 0x88000074 ...
Consoles: U-Boot console
Compatible U-Boot API signature found @bef562a8
FreeBSD/armv6 U-Boot loader, Revision 1.2
(root@fbsd, Wed Jan 28 07:03:13 EST 2015)
DRAM: 1024MB
MMC Device 1 not found
MMC Device 1 not found
Number of U-Boot devices: 2
U-Boot env: loaderdev='mmc 0'
Found U-Boot device: disk
Checking unit=0 slice=<auto> partition=<auto>... good.
/boot/kernel/kernel data=0x61bb88+0x40478 syms=[0x4+0x5eff0+0x4+0x5a3b5]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB compiled into kernel.
Kernel entry at 0x80200100...
Kernel args: (null)
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r277828M: Wed Jan 28 07:03:07 EST 2015
root@fbsd:/work/obj/arm.armv6/usr/home/scott/src-current/sys/DUOVERO arm
FreeBSD clang version 3.5.1 (tags/RELEASE_351/final 225668) 20150115
CPU: Cortex A9-r1 rev 3 (Cortex-A core)
Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
WB disabled EABT branch prediction enabled
LoUU:2 LoC:2 LoUIS:2
Cache level 1:
32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
32KB/32B 4-way instruction cache Read-Alloc
real memory = 1073741824 (1024 MB)
avail memory = 1040105472 (991 MB)
Texas Instruments OMAP4430 Processor, Revision ES2.3
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
random device not loaded/active; using insecure pseudo-random number generator
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
gic0: <ARM Generic Interrupt Controller> mem 0x48241000-0x48241fff,0x48240100-0x482401ff on ofwbus0
gic0: pn 0x390, arch 0x1, rev 0x0, implementer 0x43b irqs 160
mp_tmr0: <ARM MPCore Timers> mem 0x48240200-0x482402ff,0x48240600-0x482406ff irq 27,29 on simplebus0
mp_tmr0: missing clock-frequency attribute in FDT
device_attach: mp_tmr0 attach returned 6
omap4_prcm0: <TI OMAP Power, Reset and Clock Management> mem 0x4a306000-0x4a307fff,0x4a004000-0x4a004fff,0x4a008000-0x4a009fff,0x4a30a000-0x4a30a51f on simplebus0
mp_tmr0: <ARM MPCore Timers> mem 0x48240200-0x482402ff,0x48240600-0x482406ff irq 27,29 on simplebus0
Timecounter "MPCore" frequency 300000000 Hz quality 800
Event timer "MPCore" frequency 300000000 Hz quality 1000
ti_sdma0: <TI sDMA Controller> mem 0x4a056000-0x4a056fff irq 44,45,46,47 on simplebus0
ti_sdma0: sDMA revision 00010900
gpio0: <Ti OMAP4 General Purpose I/O (GPIO)> mem 0x4a310000-0x4a310fff,0x48055000-0x48055fff,0x48057000-0x48057fff,0x48059000-0x48059fff,0x4805b000-0x4805bfff,0x4805d000-0x4805dfff irq 61,62,63,64,65,66 on simplebus0
gpioc0: <GPIO controller> on gpio0
gpiobus0: <OFW GPIO bus> on gpio0
uart0: <TI UART (16550 compatible)> mem 0x48020000-0x480203ff irq 106 on simplebus0
uart0: console (115384,n,8,1)
uart1: <TI UART (16550 compatible)> mem 0x4806a000-0x4806a3ff irq 104 on simplebus0
uart2: <TI UART (16550 compatible)> mem 0x4806c000-0x4806c3ff irq 105 on simplebus0
uart3: <TI UART (16550 compatible)> mem 0x4806e000-0x4806e3ff irq 102 on simplebus0
iichb0: <TI I2C Controller> mem 0x48070000-0x480700ff irq 88 on simplebus0
iichb0: I2C revision 4.0 FIFO size: 16 bytes
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iichb1: <TI I2C Controller> mem 0x48072000-0x480720ff irq 89 on simplebus0
iichb1: I2C revision 4.0 FIFO size: 16 bytes
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
iichb2: <TI I2C Controller> mem 0x48060000-0x480600ff irq 93 on simplebus0
iichb2: I2C revision 4.0 FIFO size: 16 bytes
iicbus2: <OFW I2C bus> on iichb2
iic2: <I2C generic I/O> on iicbus2
iichb3: <TI I2C Controller> mem 0x48350000-0x483500ff irq 95 on simplebus0
iichb3: I2C revision 4.0 FIFO size: 16 bytes
iicbus3: <OFW I2C bus> on iichb3
iic3: <I2C generic I/O> on iicbus3
sdhci_ti0: <TI MMCHS (SDHCI 2.0)> mem 0x4809c000-0x4809cfff irq 115 on simplebus0
mmc0: <MMC/SD bus> on sdhci_ti0
ti_scm0: <TI Control Module> mem 0x4a100000-0x4a100fff on simplebus0
ehci0: <TI OMAP USB 2.0 controller> mem 0x4a064c00-0x4a064cff,0x4a064000-0x4a0646ff,0x4a062000-0x4a062fff irq 109 on simplebus0
ehci0: Starting TI EHCI USB Controller
ehci0: UHH revision 0x50700100
ehci0: OMAP_UHH_SYSCONFIG: 0x00000014
ehci0: UHH setup done, uhh_hostconfig=0x8000001c
usbus0: EHCI version 1.0
usbus0 on ehci0
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <Texas Instruments> at usbus0
uhub0: <Texas Instruments EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 16GB <SDHC SU16G 8.0 SN 101EDCC1 MFG 07/2013 by 3 SD> at mmc0 24.0MHz/4bit/65535-block
random: unblocking device.
Release APs
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub0: 3 ports with 3 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <vendor 0x7392> at usbus0
urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 2> on usbus0
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]...
warning: no time-of-day clock registered, system time will not be set accurately
Enlarging root partition
GEOM_PART: mmcsd0s2 was automatically resized.
Use `gpart commit mmcsd0s2` to save changes or `gpart undo mmcsd0s2` to revert them.
mmcsd0s2 resized
mmcsd0s2a resized
super-block backups (for fsck_ffs -b #) at:
1868992, 2336192, 2803392, 3270592, 3737792, 4204992, 4672192, 5139392,
5606592, 6073792, 6540992, 7008192, 7475392, 7942592, 8409792, 8876992,
9344192, 9811392, 10278592, 10745792, 11212992, 11680192, 12147392, 12614592,
13081792, 13548992, 14016192, 14483392, 14950592, 15417792, 15884992,
16352192, 16819392, 17286592, 17753792, 18220992, 18688192, 19155392,
19622592, 20089792, 20556992, 21024192, 21491392, 21958592, 22425792,
22892992, 23360192, 23827392, 24294592, 24761792, 25228992, 25696192,
26163392, 26630592, 27097792, 27564992, 28032192, 28499392, 28966592,
29433792, 29900992, 30368192, 30835392
Setting hostuuid: d3eaf39a-a6e5-11e4-93c3-31a666d77bba.
Setting hostid: 0xd064503d.
No suitable dump device was found.
Starting file system checks:
/dev/mmcsd0s2a: clean, 3661949 free (37 frags, 457739 blocks, 0.0% fragmentation)
Mounting local file systems:.
Setting hostname: duovero.
Feeding entropy:.
wlan0: Ethernet address: 80:1f:02:a2:d4:68
Starting wpa_supplicant.
Starting dhclient.
wlan0: no link ..........wlan0: link state changed to UP
got link
DHCPDISCOVER on wlan0 to port 67 interval 5
DHCPREQUEST on wlan0 to port 67
bound to -- renewal in 21600 seconds.
Starting Network: lo0 urtwn0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet netmask 0xff000000
groups: lo
urtwn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 80:1f:02:a2:d4:68
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
status: associated
Starting devd.
Starting pflogd:
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff: gateway ::1
add net :: gateway ::1
Generating host.conf.
Creating and/or trimming log files.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Starting casperd.
Clearing /tmp (X related).
Updating motd:.
Mounting late file systems:.
Starting ntpd.
Generating RSA1 host key.
2048 56:64:e8:e9:01:46:ee:28:41:f7:89:d7:e6:e1:f7:3c root@duovero (RSA1)
Generating RSA host key.
2048 36:8c:73:b5:3b:89:6f:24:08:2d:79:56:29:a6:42:bf root@duovero (RSA)
Generating DSA host key.
1024 b6:e0:58:6f:ca:f8:4a:3a:63:d2:1b:00:6c:88:7d:1f root@duovero (DSA)
Generating ECDSA host key.
256 c1:3a:03:e3:8b:4f:2e:8c:88:cf:f0:40:ef:5b:76:65 root@duovero (ECDSA)
Generating ED25519 host key.
256 c2:5b:4e:25:59:a9:06:f8:64:36:09:71:36:a5:5d:b4 root@duovero (ED25519)
Performing sanity check on sshd configuration.
Starting sshd.
Starting background file system checks in 60 seconds.
Wed Jan 28 08:51:16 EST 2015
FreeBSD/arm (duovero) (ttyu0)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.