Skip to content

Instantly share code, notes, and snippets.

@senier

senier/hikey960_aosp-boot.log

Created March 19, 2019 15:47
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save senier/861d8f472289f6d193d951d565001eed to your computer and use it in GitHub Desktop.
Save senier/861d8f472289f6d193d951d565001eed to your computer and use it in GitHub Desktop.
Download ZIP
HiKey960 AOSP 9.0 boot failure
Raw
hikey960_aosp-boot.log
hikey960 boarid:5301 xloader use UART6
scsysstat_value[0].
clear reset source
last_keypoint0,reboot_type0
secdbg not DCU.
SecDbgVer exit
xloader chipid is: 0x36600110, start at 331ms.
Build Date: Sep 19 2017, 15:34:09
[clock_init] ++
hikey960 [hikey960_clk_init]
hi3660 [clk_setup]
[clock_init] --
storage type is UFS
ufs retry: 6 count v_tx:0 v_rx:0
ufs set v_tx:0 v_rx:0
Hikey960[5301] no need avs_init.
ddr ft:0xf20332a3,mode:1 target:4
UceLdOk
density: 0x00080008,0x00080008,0x00080008,0x00080008,0x00080008,0x00080008,0x00080008,0x00080008
ddr info 0x00000401
400M
685M
1067M
C0R,V0x0000002f e:66
C1R,V0x0000002f e:113
C2R,V0x0000002e e:66
C3R,V0x00000031 e:66
C0R,V0x00000030 e:66
C1R,V0x00000030 e:66
C2R,V0x0000002f e:66
C3R,V0x00000032 e:66
C0R,V0x00000031 e:66
C1R,V0x00000031 e:66
C2R,V0x00000030 e:66
C3R,V0x00000033 e:66
C0R,V0x00000032 e:66
C1R,V0x00000032 e:65
C2R,V0x00000031 e:66
C3R,V0x00000034 e:65
C0R,V0x00000033 e:65
C1R,V0x00000033 e:65
C2R,V0x00000032 e:65
C3R,V0x00000035 e:65
C1R,V0x0000002f e:66
C2R,V0x0000002f e:113
C0R,V0x00000031 e:66
C1R,V0x00000030 e:66
C2R,V0x00000030 e:66
C3R,V0x00000030 e:66
C0R,V0x00000032 e:66
C1R,V0x00000031 e:66
C2R,V0x00000031 e:66
C3R,V0x00000031 e:66
C0R,V0x00000033 e:66
C1R,V0x00000032 e:65
C2R,V0x00000032 e:65
C3R,V0x00000032 e:66
C0R,V0x00000034 e:65
C1R,V0x00000033 e:65
C2R,V0x00000033 e:65
C3R,V0x00000033 e:65
1244M
1866M
C2R,V0x00000013 e:193
C2R,V0x00000014 e:66
C0R,V0x00000015 e:66
C2R,V0x00000015 e:66
C0R,V0x00000016 e:66
C2R,V0x00000016 e:66
C0R,V0x00000017 e:66
C1R,V0x00000017 e:66
C2R,V0x00000017 e:66
C3R,V0x00000017 e:66
C2R,V0x00000015 e:66
C2R,V0x00000016 e:66
C3R,V0x00000016 e:66
C1R,V0x00000017 e:113
C2R,V0x00000017 e:66
C3R,V0x00000017 e:66
pack0Idx0Dcc:0
pack1Idx0Dcc:0
pack2Idx0Dcc:0
pack3Idx0Dcc:0
iomcu_subsys_init
boot_c0 PROFILE 4
slave0 irq0:0x00000004
slave1 irq0:0x00000004
main: ******** Fastboot for Kirin *****************
main: ******** Build Date: Jun 2 2017, 17:34:24 **
main: ******** Fastboot start at 1820 ms **********
main: print soc_id computed in xloader phase, is below:
main: 00000000 main: 00000000 main: 00000000 main: 00000000 main:
main: 00000000 main: 00000000 main: 00000000 main: 00000000 main:
led_alwayson: can't get dtb operators
bbox: bbox_register_module_ops success.
bfm: : >>>>>enter bfm_init
bfm: : [disable_boot_fail_system] boot_fail_system state is 0
clock: PLL Stat
clock: PLL2 ctrl0=0x04909604,ctrl1=0x02000000
clock: PLL2 acpu en_stat:0x00000008, acpu gt_stat:0x00040000
clock: PLL2 final en_stat:0x00100000, final gt_stat:0x00020000
clock: PLL3 ctrl0=0x04904005,ctrl1=0x07000000
clock: PLL3 acpu en_stat:0x00000000, acpu gt_stat:0x00000000
clock: PLL3 final en_stat:0x00200000, final gt_stat:0x00040000
clock: clock init OK
ufs: ufs start on platform[36600110]ufs: ufs current mode: 0x00000011
ufs: ufs current gear: 0x00000003
ufs: ufs mphy reg 0x4A = 0x00000000
ufs: bUD0BaseOffset: 0x00000010, bUDConfigPLength: 0x00000010
ufs: UFS device manufacturerid = 0x000001ad
ufs: UFS device: H****
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02000001, mntnStageCode is 27
bfm: : <<<<<exit set_boot_stage.
storage: emmc_ops invalid
storage: storage type is UFS
bfm: : bfm system is disabled!
storage: emmc_init: BL2_STAGE_EMMC_OK is 33554435!
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02000003, mntnStageCode is 29
bfm: : <<<<<exit set_boot_stage.
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010001, mntnStageCode is 30
bfm: : <<<<<exit set_boot_stage.
ddr: current logic version is lpddr4 verison !!!
ddr: ddr size is 4096MB
bbox: register modid [0x81fff200]
bbox: register exception succeed.
bbox: register modid [0x81fff202]
bbox: register exception succeed.
bbox: register modid [0x81fff20b]
bbox: register exception succeed.
watchdog: Enable watchdog start
boardid: [BDID]boardid: 5301
gpio: hikey960_gpio_init: GPIO 46 202 206 ouput low, GPIO 219 pullup.
load_kernel: register_update_dt_ops for usb!
secureboot: Enter secboot_init: set pll efuse flag!
secureboot: pll efuse flag has been succ set!bbox: register modid [0x81fff20a]
bbox: register exception succeed.
secureboot: SECBOOT_DEV_INFO_DADDR = 0x1d7fff00, SECBOOT_DEV_INFO_SIZE = 0x00000040!
dtimage: number of dtb = 1
dtimage: =========uncompress_dtb_addr=[0x16f00000],====vrl_addr=[0x1b0e64e0]====
dtimage: [device_tree_get_dtb_entry:215] Verify Not Exist
dtimage: fdt_init success!
dtimage: -----can not find hisilicon,fastboot node by compatible
dtimage: -----can not find hisilicon,fastboot node by compatible
load_kernel: register_update_dt_ops for led!
reboot_reason: scsysstat_value is 0x00000000
pmu: can not find fastboot,hisi-pmic-mntn node1
pmu: pmu_property_read_u32 fastboot,hisi-pmic-mntn, hisilicon,data-width, failed
pmu: pmu_mntn_record_dts_parse failed!
bbox: save_tempbuffer_to_loop_area():727:storage_read fail[-1]
reboot_reason: reboot_reason is AP_S_COLDBOOT
reboot_reason: clear_reset_source in!
reboot_reason: tmp =0x0effcc70
dtimage: -----can not find fastboot,charger node by compatible
power: get_chargerIC_type: getU32byCompatible fastboot,charger, hw_charger_type failed!
dtimage: -----can not find fastboot,coul node by compatible
power: get_coul_type: get coul_type failed!
power: get coul_type failed!
power: hi6421v500 register coulometer ops fail!
dtimage: -----can not find huawei,hisi_bci_battery node by compatible
no_module: [hi6523_get_config_info]: can't get battery board type
dtimage: -----can not find fastboot,charger node by compatible
no_module: get hi6523 i2c reg num fail!
dtimage: -----can not find fastboot,charger node by compatible
no_module: [hi6523_start_charging_by_init_params]: get ichrg_pre_limit fail
dtimage: -----can not find huawei,hi6523_charger node by compatible
no_module: [hi6523_start_charging_by_init_params]: get reg fail
dtimage: -----can not find fastboot,buckboost node by compatible
max77813: get_buckboost_type: getU32byCompatible fastboot,buckboost, hw_buckboost_type failed!
max77813: get dts buckboost type fail!
cpu_buck: pmu type3 not registered
cpu_buck: Bad cpu buck info:1
bbox: Could not find path /rdr
bbox: Could not find status property.
mntn: tele_mntn_stat_point_init: can not bbox_ops !
dtimage: -----can not find hisilicon,fastboot node by compatible
mntn: [tele_mntn_m3_wdt_config]: getU32byCompatible(hisilicon,fastboot, lpm3-board-type) error!
mntn: mntn init
mntndump: enable_reserved_ddr_dts: Could not find path /reserved-memory/mntndump
mntndump: mntn_dump_init failed
mntndump: get_mntn_dump_addr:mid[2] is not init
mntn: kernel dump is not available
mntn: reboot_type is 0
mntn:
no need to dump_mem...
mntn: enter [registe_pstore_ramoops_dump]
mntndump: get_mntn_dump_addr:mid[5] is not init
mntn: no mdump_pstore info
mntn: M3_RDR_SYS_CONTEXT_BASE_ADDR is null
uart_cfg: [MNTN]:Could not find node.
uart_cfg: set_default_uart_cfg: uart_from_dts_read failed!
uart_cfg: module_idx 2, uart_no 6
uart_cfg: odule_idx 11, uart_no 15
uart_cfg: module_idx 2, uart_no 6
uart_cfg: getU32byCompatible(hisilicon,fastboot, uart-board-type) error!
uart_cfg: boardid: 5301 use uart port: 6
pasr: in pasr_init-43 ...ddr: current logic version is lpddr4 verison !!!
ddr: current logic version is lpddr4 verison !!!
dtimage: -----can not find huawei,lcd_panel_type node by compatible
display: [display]get_detect_type: huawei,lcd_panel_type: get detect_type fail
display: lcd:no lcd detect_type
no_module: [LOGO] get_logo_buffer_from_dtsi: Could not find path /reserved-memory/logo-buffer.
no_module: [LOGO] logo_init: logo init failed!!! used the default fb addr.
display: [display]jdi_nt35696_panel_init: lcd type is not JDI_NT35696_5P5_LCD.
display: [display]jdi_otm2503b_panel_init: lcd type is not JDI_OTM2503B_5P5_LCD.
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010002, mntnStageCode is 31
bfm: : <<<<<exit set_boot_stage.
dtimage: -----can not find huawei,lcd_panel_type node by compatible
display: [display]get_dts_value: can not get huawei,lcd_panel_type, bl_bus_id=4!
dtimage: -----can not find ti,lm36923 node by compatible
display: [display]get_dts_value: can not get ti,lm36923, support=0!
display: get lm36923_support failed!
Audio_codec: [audio]:Could not find "hisilicon,codec-controller" node.
load_teeos: can not find fb node fingerprint
load_teeos: failed to find fb node ese_config
display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010003, mntnStageCode is 32
bfm: : <<<<<exit set_boot_stage.
misc: [get_misc_message] mmc_read failed
preboot: [fastboot]: check_unlock_misc_info, line:1273 :get misc message failed.
preboot: [fastboot]: check_powerkey_misc_info, line:1242 :!!!!CAUTION!!!!:get keypad_operator FAIL!
preboot: [fastboot]: check_volumekey_state, line:943 :!!!!CAUTION!!!!:get keypad_operator FAIL!
misc: [get_misc_message] mmc_read failed
preboot: [fastboot]: comm_read_misc_cmd, line:501 :get misc message failed.
power: [check_battery_present]:g_coulometer_ops is null
power: [wait_coulometer_work]:g_coulometer_ops is null
power: [get_device_power_state]:initial coulometer fail!
preboot: [fastboot]: preboot_init, line:1480 :Hikey960 stub: set bootmode to normal_mode!
rescue: ^^^^^^^^^[rescue_init] ok !
usbloader: bootmode is 1
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010004, mntnStageCode is 33
bfm: : <<<<<exit set_boot_stage.
load_lpm3: start lpm3 loading
load_lpm3: load lpmcu image
tm: cluster0 prof0 trim result check fail:0,00000000,00000000
tm: cluster0 prof1 trim result check fail:0,00000000,00000000
tm: cluster0 prof2 trim result check fail:0,00000000,00000000
tm: cluster0 prof3 trim result check fail:0,00000000,00000000
tm: cluster0 prof4 trim result check fail:0,00000000,00000000
tm: cluster1 prof0 trim result check fail:0,00000000,00000000
tm: cluster1 prof1 trim result check fail:0,00000000,00000000
tm: cluster1 prof2 trim result check fail:0,00000000,00000000
tm: cluster1 prof3 trim result check fail:0,00000000,00000000
tm: cluster1 prof4 trim result check fail:0,00000000,00000000
tm: cluster1 prof5 trim result check fail:0,00000000,00000000
tm: cluster2 prof0 trim result check fail:0,00000000,00000000
tm: cluster2 prof1 trim result check fail:0,00000000,00000000
tm: cluster2 prof2 trim result check fail:0,00000000,00000000
tm: cluster2 prof3 trim result check fail:0,00000000,00000000
tm: cluster2 prof4 trim result check fail:0,00000000,00000000
tm: cluster2 prof5 trim result check fail:0,00000000,00000000
tm: cluster2 prof6 trim result check fail:0,00000000,00000000
tm: cluster2 prof7 trim result check fail:0,00000000,00000000
tm: C0
tm: p4
tm: path adjust:00000018
tm: svfd2:00000012
tm: svfd1:00000012
tm: svfd0:00000012
tm: p3
tm: svfd2:00000012
tm: svfd1:00000012
tm: svfd0:00000012
tm: C1
tm: p4
tm: path adjust:00000018
tm: svfd2:00000013
tm: svfd1:00000013
tm: svfd0:00000013
tm: p3
tm: svfd2:00000017
tm: svfd1:00000017
tm: svfd0:00000017
tm: p2
tm: svfd2:0000001a
tm: svfd1:0000001a
tm: svfd0:0000001a
tm: p1
tm: svfd2:0000001a
tm: svfd1:0000001a
tm: svfd0:0000001a
load_lpm3: do_lpnv_acpufreq_papa_option
load_lpm3: modify_pmu6422_para no bugfix
load_lpm3: cos_upgrade_exception_process storage_read fail!
load_lpm3: lpmcu_hisee_para_init: cos_upgrade_exception_process() fail.
load_lpm3: LPM3 load success 0x89c80000
load_lpm3: SCPERRSTSTAT4_SEC fffffffc
load_lpm3: SCOCBCRSTCTRL 00000000
load_lpm3: SCPERCLKEN2 43e00001
load_lpm3: SCPERSTAT2 c7fa4c4f
load_lpm3: SCOCBCSTAT 00007250
load_lpm3: AOCLK_CTRL 00000725
load_lpm3: SCPERSTAT3 000014c7
load_lpm3: SCOCBCSTAT 00007250
load_lpm3: AOCLK_CTRL 00000725
load_lpm3: AOCLK_CTRL 00000225
load_lpm3: CFG_M3_RST_STA 00000000
load_lpm3: load ocbc success!
load_kernel: 0xC5 = 00000032
load_kernel: 0xCC = 00000003
bfm: : bfm system is disabled!
load_kernel: load_kernel CONFIG_WITHOUT_SECURE_OS is open
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010005, mntnStageCode is 34
bfm: : <<<<<exit set_boot_stage.
bfm: : bfm system is disabled!
load_kernel: is_system_damaged, the system verify is 1 in nvme!
mntn_err: can not get gui_ops!
dtimage: -----can not find gpio-leds_v2 node by compatible
led: ERROR: Cannot update gpio-leds_v2 info
load_kernel: update dt for led err
load_kernel: update dt for led suc
usb: [usb]usb update hisilicon,gpio_hubv2 info success
load_kernel: update dt for usb suc
load_kernel: Hikey960: Enable all ip regulator
pmu_ip: Hikey960:switch from PPLL0 to PPLL3
pmu_ip: Hikey960:Enable ispfunc
pmu_ip: Hikey960:Enable clock-gating
pmu_ip: [regulator_power_all_enable] all IP regulator is power on!
load_kernel: set ISP_CORE_CTRL_S to unsec, val = 0x00000007
load_kernel: set ISP_SUB_CTRL_S to unsec, val = 0x0000000f
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010006, mntnStageCode is 35
bfm: : <<<<<exit set_boot_stage.
load_kernel: __get_cmdline: can not get audio_codec_ops!
power: [get_coulometer_nv_address]:g_coulometer_ops is null
power: [get_battery_voltage]:g_coulometer_ops is null
display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
cmdline: can not get display_info!
display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
cmdline: can not get display_info!
display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
pasr: info: ddr_die=2048M@0M ddr_die=2048M@2048M
cmdline: create_last_bootup_keypoint_cmdline,last_bootup_keypoint is invalid
cmdline: g_memdump_addr is 0
dtimage: -----can not find hisilicon,fastboot node by compatible
cmdline: bsp_need_loadmodem: getU32byCompatible hisilicon,fastboot, is_fpga failed!
cmdline: [ddr]: cmdline add ddr_density 0x00000002!
no_module: create_mdmlog_cmdline: ret = 0 or nve bit[0] = 48, would't create cmdline!!
display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
cmdline: can not get display_info!
reboot_reason: set_reboot_type is 0x000000ff.
dtimage: -----can not find hisilicon,fastboot node by compatible
mntn: [mntnops_before_boot_kernel]: getU32byCompatible error!
mntn: apwatchdog_status_is_ok: cannot find amba/watchdog0, ret=-1
watchdog: Disable watchdog start
ddr: current logic version is lpddr4 verison !!!
mem_cfg: memory section - 0000000000000000 : 0000000080000000 -
mem_cfg: memory section + 0000000000000000 : 0000000080000000 +
mem_cfg: memory section - 0000000080000000 : 0000000080000000 -
mem_cfg: memory section + 0000000080000000 : 0000000060000000 +
mem_cfg: memory section + 0000000200000000 : 0000000020000000 +
mem_cfg: Could not find /reserved-memory/ddr-training2.
mem_cfg: update_bl31_ddrc_info: secmem return wrong,may not a failure.
mem_cfg: update_fastboot_cma_bl31_ddrc_info: base 0x0000000016c00003 size 0x0000000004000000
usbloader: iddq is 0x0000000000000000
usbloader: hpm is 0x0000000000000000
usbloader: dieid is 0x0a0440096f86060ac7aac55220a1051c32c15193
load_kernel: Hikey960: Enable all ip regulator
pmu_ip: Hikey960:switch from PPLL0 to PPLL3
pmu_ip: Hikey960:Enable ispfunc
pmu_ip: Hikey960:Enable clock-gating
pmu_ip: [regulator_power_all_enable] all IP regulator is power on!
load_kernel: set ISP_CORE_CTRL_S to unsec, val = 0x00000007
load_kernel: set ISP_SUB_CTRL_S to unsec, val = 0x0000000f
load_kernel:
----boot time is 3551 ms----
load_kernel: boot_from_bl31: boot to trusted firmware. addr=0x00000000
<hit enter to activate fiq debugger>
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.77-geae6367a9237 (android-build@wpiy7.hot.corp.google.com) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 19 21:54:03 UTC 2018
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] Ion: base 0xde200000, size is 0x1e00000, node name graphic, heap-name carveout_gralloc namesize 17,[99][97][114][118]
[ 0.000000] Ion: insert heap-name carveout_gralloc
[ 0.000000] OF: reserved mem: initialized node graphic, compatible id hisi_ion
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000016c00000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node fastboot-cma-mem, compatible id shared-dma-pool
[ 0.000000] cma: Reserved 64 MiB at 0x00000000da000000
[ 0.000000] On node 0 totalpages: 1044415
[ 0.000000] DMA zone: 14271 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 913343 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] percpu: Embedded 21 pages/cpu @ffffffc21fefc000 s53272 r0 d32744 u86016
[ 0.000000] pcpu-alloc: s53272 r0 d32744 u86016 alloc=21*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1028096
[ 0.000000] Kernel command line: androidboot.hardware=hikey960 console=ttyFIQ0 androidboot.console=ttyFIQ0 firmware_class.path=/system/etc/firmware loglevel=15 buildvariant=userdebug androidboot.swtype=normal fastboot_version=DailyBuild_201706021648_FASTBOOT setup_logctl=1 fastbootdmd=0 enter_recovery=0 androidboot.mode=normal low_volt_flag=1 boardid=0x000014b5 normal_reset_type=coldboot ddr_die=2048M@0M ddr_die=2048M@2048M efuse_status=2 androidboot.serialno=6330198053000000 himntn=111111111111111010111111101001100010001 boot_slice=0x0001a3fa reboot_reason=AP_S_COLDBOOT recovery_update=0 userlock=locked bootlock=unlocked hw_bfm_enable=0 ddr_density=2 swiotlb=2 mdmreglogbase=0x00000000 mdmreglogsize=0x00000000 modem_socp_enable=0 androidboot.hardware=HiKey960 androidboot.veritymode=enforcing androidboot.verifiedbootstate=ORANGE ufs_product_name=hB8aL1 format_data=1 cpu_buck_reg=0x;; androidboot.ddrsize=4 kce_status=1 console=ttyAMA6,115200
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB [mem 0xde1bf000-0xde1ff000] (0MB) mapped at [ffffffc0de1bf000-ffffffc0de1fefff]
[ 0.000000] Memory: 3903324K/4177660K available (12988K kernel code, 1318K rwdata, 3848K rodata, 1152K init, 995K bss, 143264K reserved, 131072K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008d30000 ( 12992 KB)
[ 0.000000] .rodata : 0xffffff8008d30000 - 0xffffff8009100000 ( 3904 KB)
[ 0.000000] .init : 0xffffff8009100000 - 0xffffff8009220000 ( 1152 KB)
[ 0.000000] .data : 0xffffff8009220000 - 0xffffff8009369a00 ( 1319 KB)
[ 0.000000] .bss : 0xffffff8009369a00 - 0xffffff800946294c ( 996 KB)
[ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000] 0xffffffbf00000000 - 0xffffffbf08800000 ( 136 MB actual)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc220000000 ( 8704 MB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 1.92MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
[ 0.000005] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
[ 0.000101] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58334160866034 ns
[ 0.000750] Console: colour dummy device 80x25
[ 0.000787] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
[ 0.000798] pid_max: default: 32768 minimum: 301
[ 0.000970] Security Framework initialized
[ 0.000982] SELinux: Initializing.
[ 0.001048] SELinux: Starting in permissive mode
[ 0.001107] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001115] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.002016] ftrace: allocating 41273 entries in 162 pages
[ 0.070013] sched-energy: Sched-energy-costs installed from DT
[ 0.070042] CPU0: update cpu_capacity 462
[ 0.070061] ASID allocator initialised with 32768 entries
[ 0.101694] EFI services will not be available.
[ 0.149629] Detected VIPT I-cache on CPU1
[ 0.149720] CPU1: update cpu_capacity 462
[ 0.149723] CPU1: Booted secondary processor [410fd034]
[ 0.181536] Detected VIPT I-cache on CPU2
[ 0.181568] CPU2: update cpu_capacity 462
[ 0.181570] CPU2: Booted secondary processor [410fd034]
[ 0.213565] Detected VIPT I-cache on CPU3
[ 0.213593] CPU3: update cpu_capacity 462
[ 0.213595] CPU3: Booted secondary processor [410fd034]
[ 0.247169] Detected VIPT I-cache on CPU4
[ 0.247180] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU4: 0x00000000101122
[ 0.247187] CPU features: Unsupported CPU feature variation detected.
[ 0.247213] CPU4: update cpu_capacity 1024
[ 0.247215] CPU4: Booted secondary processor [410fd091]
[ 0.277609] Detected VIPT I-cache on CPU5
[ 0.277614] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU5: 0x00000000101122
[ 0.277629] CPU5: update cpu_capacity 1024
[ 0.277631] CPU5: Booted secondary processor [410fd091]
[ 0.309660] Detected VIPT I-cache on CPU6
[ 0.309666] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU6: 0x00000000101122
[ 0.309681] CPU6: update cpu_capacity 1024
[ 0.309682] CPU6: Booted secondary processor [410fd091]
[ 0.341721] Detected VIPT I-cache on CPU7
[ 0.341726] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU7: 0x00000000101122
[ 0.341741] CPU7: update cpu_capacity 1024
[ 0.341742] CPU7: Booted secondary processor [410fd091]
[ 0.341814] Brought up 8 CPUs
[ 0.341870] SMP: Total of 8 processors activated.
[ 0.341881] CPU features: detected feature: 32-bit EL0 Support
[ 0.341941] CPU: All CPU(s) started at EL1
[ 0.341984] alternatives: patching kernel code
[ 0.342131] CPU7: update max cpu_capacity 1024
[ 0.345653] CPU2: update max cpu_capacity 462
[ 0.345663] CPU5: update max cpu_capacity 1024
[ 0.358257] DMI not present or invalid.
[ 0.358552] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.358570] futex hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.361535] xor: measuring software checksum speed
[ 0.401504] 8regs : 3629.000 MB/sec
[ 0.441511] 8regs_prefetch: 3866.000 MB/sec
[ 0.481542] 32regs : 4543.000 MB/sec
[ 0.521572] 32regs_prefetch: 3866.000 MB/sec
[ 0.521578] xor: using function: 32regs (4543.000 MB/sec)
[ 0.521592] pinctrl core: initialized pinctrl subsystem
[ 0.522655] NET: Registered protocol family 16
[ 0.523308] schedtune: init normalization constants...
[ 0.523318] schedtune: CLUSTER[0-3] min_pwr: 0 max_pwr: 144
[ 0.523334] schedtune: CPU[0] min_pwr: 0 max_pwr: 502
[ 0.523341] schedtune: CPU[1] min_pwr: 0 max_pwr: 502
[ 0.523346] schedtune: CPU[2] min_pwr: 0 max_pwr: 502
[ 0.523352] schedtune: CPU[3] min_pwr: 0 max_pwr: 502
[ 0.523358] schedtune: CLUSTER[4-7] min_pwr: 0 max_pwr: 433
[ 0.523364] schedtune: CPU[4] min_pwr: 0 max_pwr: 2848
[ 0.523369] schedtune: CPU[5] min_pwr: 0 max_pwr: 2848
[ 0.523374] schedtune: CPU[6] min_pwr: 0 max_pwr: 2848
[ 0.523380] schedtune: CPU[7] min_pwr: 0 max_pwr: 2848
[ 0.523385] schedtune: SYSTEM min_pwr: 0 max_pwr: 13977
[ 0.523391] schedtune: using normalization constants mul: 739642719 sh1: 1 sh2: 13
[ 0.523396] schedtune: verify normalization constants...
[ 0.523402] schedtune: max_pwr/2^0: 13977 => norm_pwr: 1024
[ 0.523407] schedtune: max_pwr/2^1: 6988 => norm_pwr: 511
[ 0.523411] schedtune: max_pwr/2^2: 3494 => norm_pwr: 255
[ 0.523417] schedtune: max_pwr/2^3: 1747 => norm_pwr: 127
[ 0.523421] schedtune: max_pwr/2^4: 873 => norm_pwr: 63
[ 0.523427] schedtune: max_pwr/2^5: 436 => norm_pwr: 31
[ 0.523432] schedtune: configured to support 5 boost groups
[ 0.539349] cpuidle: using governor ladder
[ 0.551354] cpuidle: using governor menu
[ 0.551367] Registered FIQ tty driver
[ 0.551423] serial_debugger: uart overlay applied
[ 0.551913] vdso: 2 pages (1 code @ ffffff8008d37000, 1 data @ ffffff8009224000)
[ 0.551924] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.552793] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.552861] Serial: AMBA PL011 UART driver
[ 0.553106] pstore: using zlib compression
[ 0.553581] console [pstore-1] enabled
[ 0.553603] pstore: Registered ramoops as persistent store backend
[ 0.553611] ramoops: attached 0x100000@0x20a00000, ecc: 0/0
[ 0.570224] hi3660-mbox e896b000.mailbox: Mailbox enabled
[ 0.571417] uart-pl011 ffd74000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart3_pmx_func, deferring probe
[ 0.571643] uart-pl011 fdf01000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart4_pmx_func, deferring probe
[ 0.603757] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.669766] raid6: int64x1 gen() 1378 MB/s
[ 0.737815] raid6: int64x1 xor() 778 MB/s
[ 0.805871] raid6: int64x2 gen() 1661 MB/s
[ 0.873924] raid6: int64x2 xor() 972 MB/s
[ 0.941991] raid6: int64x4 gen() 1874 MB/s
[ 1.010028] raid6: int64x4 xor() 1112 MB/s
[ 1.078095] raid6: int64x8 gen() 1646 MB/s
[ 1.146144] raid6: int64x8 xor() 1008 MB/s
[ 1.214206] raid6: neonx1 gen() 2035 MB/s
[ 1.282244] raid6: neonx1 xor() 1167 MB/s
[ 1.350291] raid6: neonx2 gen() 3129 MB/s
[ 1.418343] raid6: neonx2 xor() 1901 MB/s
[ 1.486408] raid6: neonx4 gen() 4430 MB/s
[ 1.554453] raid6: neonx4 xor() 2544 MB/s
[ 1.622508] raid6: neonx8 gen() 3179 MB/s
[ 1.690562] raid6: neonx8 xor() 2147 MB/s
[ 1.690569] raid6: using algorithm neonx4 gen() 4430 MB/s
[ 1.690577] raid6: .... xor() 2544 MB/s, rmw enabled
[ 1.690584] raid6: using intx1 recovery algorithm
[ 1.690832] ACPI: Interpreter disabled.
[ 1.691513] hisi_smmu_probe_lpae, smmu_phy_pgtable_addr is = 89cc07a0
[ 1.691632] vgaarb: loaded
[ 1.691810] SCSI subsystem initialized
[ 1.691939] libata version 3.00 loaded.
[ 1.692026] ssp-pl022 ffd68000.spi: could not find pctldev for node /soc/pinmux@fff11000/spi2_pmx_func, deferring probe
[ 1.692053] ssp-pl022 ff3b3000.spi: could not find pctldev for node /soc/pinmux@ff3b6000/spi3_pmx_func, deferring probe
[ 1.692241] usbcore: registered new interface driver usbfs
[ 1.692274] usbcore: registered new interface driver hub
[ 1.692351] usbcore: registered new device driver usb
[ 1.692373] tcpc_class_init_1.1.1_G
[ 1.692391] TCPC class init OK
[ 1.692404] Init Richtek RegMap
[ 1.692527] i2c_designware ffd71000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c0_pmx_func, deferring probe
[ 1.692556] i2c_designware ffd72000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c1_pmx_func, deferring probe
[ 1.692585] i2c_designware fdf0b000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c7_pmx_func, deferring probe
[ 1.692658] Linux video capture interface: v2.00
[ 1.692785] dmi: Firmware registration failed.
[ 1.693071] Ion: invalid heap-name in node iommu_info, please check the name
[ 1.693082] Ion: invalid heap-name in node linear, please check the name
[ 1.693130] Ion: node name [heap_sys_user], heap-name [sys_heap]
[ 1.693142] Ion: heap index 0 : name sys_heap base 0x0 size 0x0 id 0 type 0
[ 1.693151] Ion: heap sys_heap base =0, try to find dynamic area
[ 1.693158] Ion: name = sys_heap, table name carveout_gralloc
[ 1.693165] Ion: name = sys_heap, table name
[ 1.693172] Ion: name = sys_heap, table name
[ 1.693179] Ion: name = sys_heap, table name
[ 1.693185] Ion: name = sys_heap, table name
[ 1.693202] Ion: node name [heap_sys_contig], heap-name [sys_contig]
[ 1.693212] Ion: heap index 1 : name sys_contig base 0x0 size 0x0 id 1 type 1
[ 1.693220] Ion: heap sys_contig base =0, try to find dynamic area
[ 1.693227] Ion: name = sys_contig, table name carveout_gralloc
[ 1.693233] Ion: name = sys_contig, table name
[ 1.693239] Ion: name = sys_contig, table name
[ 1.693246] Ion: name = sys_contig, table name
[ 1.693252] Ion: name = sys_contig, table name
[ 1.693267] Ion: node name [heap_carveout_gralloc], heap-name [carveout_gralloc]
[ 1.693278] Ion: heap index 2 : name carveout_gralloc base 0x0 size 0x0 id 2 type 2
[ 1.693285] Ion: heap carveout_gralloc base =0, try to find dynamic area
[ 1.693292] Ion: name = carveout_gralloc, table name carveout_gralloc
[ 1.693300] Ion: have found heap name carveout_gralloc base = 0xde200000, size 31457280
[ 1.693314] Ion: node name [heap_camera], heap-name [camera_heap]
[ 1.693324] Ion: type name error ion_dma_pool!
[ 1.693341] in hisi_ion_enable_iommu start
[ 1.693355] get_domain_data_lpae:start_addr 0x40000, size 0xbffc0000 align 0x8000
[ 1.693367] Ion: id 0 name sys_heap base 0 size 0
[ 1.693444] Ion: adding heap sys_heap of type 0 with 0@0
[ 1.693452] Ion: id 1 name sys_contig base 0 size 0
[ 1.693466] Ion: adding heap sys_contig of type 1 with 0@0
[ 1.693473] Ion: id 2 name carveout_gralloc base 3726639104 size 31457280
[ 1.698139] Ion: adding heap carveout_gralloc of type 2 with de200000@1e00000
[ 1.698377] Advanced Linux Sound Architecture Driver Initialized.
[ 1.698745] Bluetooth: Core ver 2.22
[ 1.698783] NET: Registered protocol family 31
[ 1.698791] Bluetooth: HCI device and connection manager initialized
[ 1.698804] Bluetooth: HCI socket layer initialized
[ 1.698817] Bluetooth: L2CAP socket layer initialized
[ 1.698847] Bluetooth: SCO socket layer initialized
[ 1.699112] NetLabel: Initializing
[ 1.699120] NetLabel: domain hash size = 128
[ 1.699128] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.699165] NetLabel: unlabeled traffic allowed by default
[ 1.699865] clocksource: Switched to clocksource arch_sys_counter
[ 1.763126] VFS: Disk quotas dquot_6.6.0
[ 1.763205] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.763553] pnp: PnP ACPI: disabled
[ 1.767302] NET: Registered protocol family 2
[ 1.767721] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.767882] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.768081] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.768120] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.768152] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.768320] NET: Registered protocol family 1
[ 1.768348] PCI: CLS 0 bytes, default 128
[ 1.768529] Trying to unpack rootfs image as initramfs...
[ 1.811845] Freeing initrd memory: 1644K
[ 1.812738] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.812944] kvm [1]: HYP mode not available
[ 1.815075] audit: initializing netlink subsys (disabled)
[ 1.815138] audit: type=2000 audit(1.759:1): initialized
[ 1.815658] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 1.816401] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.816439] Registering sdcardfs 0.1
[ 1.816580] fuse init (API version 7.26)
[ 1.816736] 9p: Installing v9fs 9p2000 file system support
[ 1.816917] SELinux: Registering netfilter hooks
[ 1.819282] io scheduler noop registered
[ 1.819306] io scheduler cfq registered (default)
[ 1.820042] pinctrl-single e896c000.pinmux: 124 pins at pa ffffff800959a000 size 496
[ 1.820147] pinctrl-single ff37e000.pinmux: 6 pins at pa ffffff800959c000 size 24
[ 1.820255] pinctrl-single ff3b6000.pinmux: 12 pins at pa ffffff800959e000 size 48
[ 1.820354] pinctrl-single ff3fd000.pinmux: 6 pins at pa ffffff80095a0000 size 24
[ 1.820480] pinctrl-single fff11000.pinmux: 42 pins at pa ffffff80095a2000 size 168
[ 1.820677] pinctrl-single e896c800.pinmux: 128 pins at pa ffffff80095a4800 size 512
[ 1.820779] pinctrl-single ff3b6800.pinmux: 6 pins at pa ffffff80095a6800 size 24
[ 1.820880] pinctrl-single ff3fd800.pinmux: 6 pins at pa ffffff80095a8800 size 24
[ 1.820978] pinctrl-single ff37e800.pinmux: 6 pins at pa ffffff80095aa800 size 24
[ 1.821110] pinctrl-single fff11800.pinmux: 47 pins at pa ffffff80095ac800 size 188
[ 1.821702] pl061_gpio e8a0b000.gpio: PL061 GPIO chip @0x00000000e8a0b000 registered
[ 1.822066] pl061_gpio e8a0c000.gpio: PL061 GPIO chip @0x00000000e8a0c000 registered
[ 1.822417] pl061_gpio e8a0d000.gpio: PL061 GPIO chip @0x00000000e8a0d000 registered
[ 1.822769] pl061_gpio e8a0e000.gpio: PL061 GPIO chip @0x00000000e8a0e000 registered
[ 1.823117] pl061_gpio e8a0f000.gpio: PL061 GPIO chip @0x00000000e8a0f000 registered
[ 1.823466] pl061_gpio e8a10000.gpio: PL061 GPIO chip @0x00000000e8a10000 registered
[ 1.823815] pl061_gpio e8a11000.gpio: PL061 GPIO chip @0x00000000e8a11000 registered
[ 1.824176] pl061_gpio e8a12000.gpio: PL061 GPIO chip @0x00000000e8a12000 registered
[ 1.824519] pl061_gpio e8a13000.gpio: PL061 GPIO chip @0x00000000e8a13000 registered
[ 1.824864] pl061_gpio e8a14000.gpio: PL061 GPIO chip @0x00000000e8a14000 registered
[ 1.825207] pl061_gpio e8a15000.gpio: PL061 GPIO chip @0x00000000e8a15000 registered
[ 1.825557] pl061_gpio e8a16000.gpio: PL061 GPIO chip @0x00000000e8a16000 registered
[ 1.825908] pl061_gpio e8a17000.gpio: PL061 GPIO chip @0x00000000e8a17000 registered
[ 1.826257] pl061_gpio e8a18000.gpio: PL061 GPIO chip @0x00000000e8a18000 registered
[ 1.826601] pl061_gpio e8a19000.gpio: PL061 GPIO chip @0x00000000e8a19000 registered
[ 1.826946] pl061_gpio e8a1a000.gpio: PL061 GPIO chip @0x00000000e8a1a000 registered
[ 1.827282] pl061_gpio e8a1b000.gpio: PL061 GPIO chip @0x00000000e8a1b000 registered
[ 1.827624] pl061_gpio e8a1c000.gpio: PL061 GPIO chip @0x00000000e8a1c000 registered
[ 1.827993] pl061_gpio ff3b4000.gpio: PL061 GPIO chip @0x00000000ff3b4000 registered
[ 1.828346] pl061_gpio ff3b5000.gpio: PL061 GPIO chip @0x00000000ff3b5000 registered
[ 1.828698] pl061_gpio e8a1f000.gpio: PL061 GPIO chip @0x00000000e8a1f000 registered
[ 1.829051] pl061_gpio e8a20000.gpio: PL061 GPIO chip @0x00000000e8a20000 registered
[ 1.829413] pl061_gpio fff0b000.gpio: PL061 GPIO chip @0x00000000fff0b000 registered
[ 1.829772] pl061_gpio fff0c000.gpio: PL061 GPIO chip @0x00000000fff0c000 registered
[ 1.830129] pl061_gpio fff0d000.gpio: PL061 GPIO chip @0x00000000fff0d000 registered
[ 1.830493] pl061_gpio fff0e000.gpio: PL061 GPIO chip @0x00000000fff0e000 registered
[ 1.830856] pl061_gpio fff0f000.gpio: PL061 GPIO chip @0x00000000fff0f000 registered
[ 1.831215] pl061_gpio fff10000.gpio: PL061 GPIO chip @0x00000000fff10000 registered
[ 1.831563] pl061_gpio fff1d000.gpio: PL061 GPIO chip @0x00000000fff1d000 registered
[ 1.862696] OF: PCI: host bridge /soc/pcie@f4000000 ranges:
[ 1.862716] OF: PCI: MEM 0xf6000000..0xf7ffffff -> 0x00000000
[ 2.863423] Kirin-pcie f4000000.pcie: Link Fail
[ 2.863534] Kirin-pcie f4000000.pcie: PCI host bridge to bus 0000:00
[ 2.863547] pci_bus 0000:00: root bus resource [bus 00-01]
[ 2.863558] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf7ffffff] (bus address [0x00000000-0x01ffffff])
[ 2.863596] pci 0000:00:00.0: [19e5:3660] type 01 class 0x060400
[ 2.863633] pci 0000:00:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 2.863770] pci 0000:00:00.0: supports D1 D2
[ 2.863778] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 2.864104] pci 0000:00:00.0: BAR 0: assigned [mem 0xf6000000-0xf6ffffff]
[ 2.864119] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 2.864398] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[ 2.864411] pcie_pme 0000:00:00.0:pcie001: service driver pcie_pme loaded
[ 2.864518] aer 0000:00:00.0:pcie002: service driver aer loaded
[ 2.866993] hisi-asp-dma e804b000.asp_dmac: initialized
[ 2.868713] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.870008] [drm] Initialized
[ 2.870341] [drm] wait for external HDMI bridge driver.
[ 2.870497] mali e82c0000.mali: Continuing without Mali regulator control
[ 2.871139] mali e82c0000.mali: GPU identified as 0x0 arch 6.0.10 r0p0 status 2
[ 2.871701] mali e82c0000.mali: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[ 2.872106] mali e82c0000.mali: Probed as mali0
[ 2.875879] Error reading temperature for gpu thermal zone: -22
[ 2.879363] brd: module loaded
[ 2.883101] loop: module loaded
[ 2.883342] [I/GPIO_HUB] gpio_hub_probe: step in
[ 2.883521] [I/GPIO_HUB] gpio_hub_init:gpio hub init status:0
[ 2.885370] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[ 2.885383] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
[ 2.885392] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[ 2.885402] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
[ 2.906779] scsi host0: ufshcd
[ 2.916766] libphy: Fixed MDIO Bus: probed
[ 2.916775] tun: Universal TUN/TAP device driver, 1.6
[ 2.916782] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.917191] PPP generic driver version 2.4.2
[ 2.917273] PPP BSD Compression module registered
[ 2.917282] PPP Deflate Compression module registered
[ 2.917307] PPP MPPE Compression module registered
[ 2.917402] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 2.917441] usbcore: registered new interface driver pegasus
[ 2.917473] usbcore: registered new interface driver rtl8150
[ 2.917506] usbcore: registered new interface driver r8152
[ 2.917538] usbcore: registered new interface driver asix
[ 2.917570] usbcore: registered new interface driver ax88179_178a
[ 2.917601] usbcore: registered new interface driver cdc_ether
[ 2.917631] usbcore: registered new interface driver dm9601
[ 2.917663] usbcore: registered new interface driver CoreChips
[ 2.917692] usbcore: registered new interface driver smsc75xx
[ 2.917723] usbcore: registered new interface driver smsc95xx
[ 2.917754] usbcore: registered new interface driver net1080
[ 2.917784] usbcore: registered new interface driver plusb
[ 2.917814] usbcore: registered new interface driver cdc_subset
[ 2.917845] usbcore: registered new interface driver zaurus
[ 2.917876] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 2.917911] usbcore: registered new interface driver cdc_ncm
[ 2.918241] [USB3][hisi_dwc3_probe]+
[ 2.918366] [USB3][get_phy_param]eye diagram param: 0x1c466e3
[ 2.918375] [USB3][get_phy_param]eye diagram host param: 0x1c466e3
[ 2.918384] [USB3][get_phy_param]usb3_phy_cr_param: 0xb80
[ 2.918391] [USB3][get_phy_param]usb3_phy_host_cr_param: 0x980
[ 2.918399] [USB3][get_phy_param]usb3_phy_tx_vboost_lvl: 5
[ 2.918425] [USB3][get_resource]this is asic platform (fpga flag 0)
[ 2.918432] [USB3][create_attr_file]+
[ 2.918500] [USB3][create_attr_file]-
[ 2.918509] [USB3][hi3660_usb3phy_init]+
[ 2.944003] [USB3][config_femtophy_param]set hs phy param 0x1c466e3 for device
[ 2.944597] [USB3][config_femtophy_param]set ss phy rx equalization 0xb80
[ 2.945573] [USB3][config_femtophy_param]set ss RX_SCOPE_VDCC 0x1
[ 2.945582] [USB3][config_femtophy_param]set ss phy tx vboost lvl 0x5
[ 2.945589] [USB3][set_hisi_dwc3_power_flag]set hisi_dwc3_power_flag 1
[ 2.945596] [USB3][hi3660_usb3phy_init]-
[ 2.946106] [dwc3_otg_init]+
[ 2.946117] DWC3_OCFG: 0x0
[ 2.946124] DWC3_OCTL: 0x40
[ 2.946131] DWC3_OEVT: 0x80000000
[ 2.946138] DWC3_OEVTEN: 0x0
[ 2.946144] DWC3_OSTS: 0x19
[ 2.946152] DWC3_BCFG: 0x0
[ 2.946158] DWC3_BCEVT: 0x0
[ 2.946165] DWC3_BCEVTEN: 0x0
[ 2.946171] [dwc3_otg_init]-
[ 2.946201] dwc3 ff100000.dwc3: dwc3_host_init if otg, otg will do device_add.
[ 2.948651] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
[ 2.948664] [USB3][hisi_dwc3_probe]init state: OFF
[ 2.948672] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
[ 2.948679] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
[ 2.948686] [USB3][hisi_usb_otg_event]event: 1
[ 2.948697] [USB3][hisi_dwc3_probe]-
[ 2.948708] [USB3][event_work]+
[ 2.948723] [USB3][handle_event][handle_event] type: 1
[ 2.948733] [dwc3_otg_work]+
[ 2.948733] evt = 4
[ 2.948743] [dwc3_otg_stop_peripheral]+
[ 2.948752] [dwc3_otg_stop_peripheral]-
[ 2.948760] [dwc3_suspend_device] +
[ 2.948834] [dwc3_suspend_device] -
[ 2.948843] [dwc3_otg_work]-
[ 2.948852] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock
[ 2.948865] [USB3][handle_event]hisi usb status: DEVICE -> OFF
[ 2.948873] [USB3][event_work]-
[ 2.949100] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.949109] ehci-pci: EHCI PCI platform driver
[ 2.949145] ehci-platform: EHCI generic platform driver
[ 2.949275] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.949294] ohci-pci: OHCI PCI platform driver
[ 2.949329] ohci-platform: OHCI generic platform driver
[ 2.949673] usbcore: registered new interface driver cdc_acm
[ 2.949681] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.949715] usbcore: registered new interface driver usb-storage
[ 2.949783] usbcore: registered new interface driver usbserial
[ 2.949816] usbcore: registered new interface driver usbserial_generic
[ 2.949852] usbserial: USB Serial support registered for generic
[ 2.949892] usbcore: registered new interface driver ftdi_sio
[ 2.949918] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 2.949943] usbcore: registered new interface driver option
[ 2.949970] usbserial: USB Serial support registered for GSM modem (1-port)
[ 2.949994] usbcore: registered new interface driver pl2303
[ 2.950018] usbserial: USB Serial support registered for pl2303
[ 2.950043] usbcore: registered new interface driver qcserial
[ 2.950068] usbserial: USB Serial support registered for Qualcomm USB modem
[ 2.950094] usbcore: registered new interface driver usb_serial_simple
[ 2.950121] usbserial: USB Serial support registered for carelink
[ 2.950146] usbserial: USB Serial support registered for zio
[ 2.950169] usbserial: USB Serial support registered for funsoft
[ 2.950194] usbserial: USB Serial support registered for flashloader
[ 2.950218] usbserial: USB Serial support registered for google
[ 2.950243] usbserial: USB Serial support registered for vivopay
[ 2.950269] usbserial: USB Serial support registered for moto_modem
[ 2.950295] usbserial: USB Serial support registered for novatel_gps
[ 2.950320] usbserial: USB Serial support registered for hp4x
[ 2.950344] usbserial: USB Serial support registered for suunto
[ 2.950370] usbserial: USB Serial support registered for siemens_mpi
[ 2.950432] gadgetfs: USB Gadget filesystem, version 24 Aug 2004
[ 2.950440] [I/hisi_pd] pd_dpm_init
[ 2.950515] [I/hisi_pd] pd_dpm_probe : +++++++++
[ 2.950579] [I/hisi_pd] pd_dpm_probe ++++
[ 2.950579]
[ 2.950815] rt1711h_init (1.1.8_G): initializing...
[ 2.950830] rt1711h node found...
[ 2.951038] mousedev: PS/2 mouse device common for all mice
[ 2.951553] rtc-pl031 fff04000.rtc: rtc core: registered pl031 as rtc0
[ 2.951737] i2c /dev entries driver
[ 2.952750] hi3660_thermal fff30000.tsensor: failed to register thermal sensor0: -19
[ 2.952768] hi3660_thermal fff30000.tsensor: failed to register thermal sensor1: -19
[ 2.952784] hi3660_thermal fff30000.tsensor: failed to register thermal sensor2: -19
[ 2.952801] hi3660_thermal fff30000.tsensor: failed to register thermal sensor3: -19
[ 2.952845] hi3660_thermal fff30000.tsensor: failed to register thermal sensor5: -19
[ 2.952853] hi3660_thermal fff30000.tsensor: Thermal Sensor Loaded
[ 2.953140] sp805-wdt e8a06000.watchdog: registration successful
[ 2.953257] sp805-wdt e8a07000.watchdog: registration successful
[ 2.953306] device-mapper: uevent: version 1.0.3
[ 2.953389] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 2.953551] Bluetooth: HCI UART driver ver 2.3
[ 2.953561] Bluetooth: HCI UART protocol H4 registered
[ 2.953608] Bluetooth: HCI UART protocol LL registered
[ 2.953642] usbcore: registered new interface driver btusb
[ 2.955378] DT idle-states: /cpus/idle-states/cluster-sleep-0 idle state not valid, bailing out
[ 2.956585] sdhci: Secure Digital Host Controller Interface driver
[ 2.956593] sdhci: Copyright(c) Pierre Ossman
[ 2.956626] Synopsys Designware Multimedia Card Interface Driver
[ 2.957123] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
[ 2.959248] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
[ 2.959309] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
[ 2.959318] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
[ 2.959347] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 55,32 bit host data width,256 deep fifo
[ 2.959502] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
[ 2.982721] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 3.000994] dwmmc_k3 ff37f000.dwmmc1: 1 slots initialized
[ 3.001255] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
[ 3.004420] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
[ 3.004501] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
[ 3.004514] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
[ 3.004561] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 56,32 bit host data width,256 deep fifo
[ 3.004848] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.008680] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.009020] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.012993] usbcore: registered new interface driver usbhid
[ 3.013027] usbhid: USB HID core driver
[ 3.013568] ashmem: initialized
[ 3.013750] nanohub: loaded; ret=0
[ 3.014351] hi6220-serial-debug fff32000.fiq-debugger: No signal IRQ, error=-6
[ 3.014388] hi6220-serial-debug fff32000.fiq-debugger: No wakeup IRQ, error=-6
[ 3.096195] ufshcd-hi3660 ff3b0000.ufs: ufshcd_read_desc_param: Failed reading descriptor. desc_id 0 param_offset 0 buff_len 31 ret 0
[ 3.096200] ufshcd-hi3660 ff3b0000.ufs: ufs_get_device_info: Failed reading Device Desc. err = -22
[ 3.096204] ufshcd-hi3660 ff3b0000.ufs: ufs_advertise_fixup_device: Failed getting device info. err = -22
[ 3.098652] ufs final power mode: gear = 3, lane = 2, pwr = 1, rate = 2
[ 3.098656] ufshcd-hi3660 ff3b0000.ufs: set TX_EQUALIZER 3.5db
[ 3.101009] ufshcd-hi3660 ff3b0000.ufs: check TX_EQUALIZER DB value lane0 = 0x1
[ 3.101020] ufshcd-hi3660 ff3b0000.ufs: check TX_EQUALIZER DB value lane1 = 0x1
[ 3.136160] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
[ 3.172264] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
[ 3.208213] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
[ 3.244228] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
[ 3.280243] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
[ 3.316226] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
[ 3.352213] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
[ 3.388227] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
[ 3.424209] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
[ 3.460225] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
[ 3.460243] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag_retry: query attribute, opcode 5, idn 3, failed with error -11 after 10 retires
[ 3.496210] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
[ 3.532223] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
[ 3.568200] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
[ 3.604223] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
[ 3.640207] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
[ 3.676221] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
[ 3.712227] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
[ 3.748220] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
[ 3.783963] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
[ 3.820214] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
[ 3.820230] ufshcd-hi3660 ff3b0000.ufs: ufshcd_read_desc_param: Failed reading descriptor. desc_id 8 param_offset 0 buff_len 98 ret -11
[ 3.820243] ufshcd-hi3660 ff3b0000.ufs: ufshcd_init_icc_levels: Failed reading power descriptor.len = 98 ret = -11
[ 5.732652] random: fast init done
[ 6.240828] console [ttyFIQ0] enabled
[ 6.244651] Registered fiq debugger ttyFIQ0
[ 6.249217] hisi_ddr_devfreq ddr_devfreq: init success
[ 6.254628] optee: probing for conduit method from DT.
[ 6.259831] optee: api uid mismatch
[ 6.263467] hifi_misc [E][359755]:hifi_check_img_loaded:1472: hifi img is loaded fail: 0xffffffff.
[ 6.273506] hifi pdev name[hifidsp].
[ 6.277164] DRV_IPCIntInit begin.
[ 6.280517] DRV_IPCIntInit line = 220
[ 6.284224] BSP_DRV_IPCIntInit end.
[ 6.287749] func = mailbox_init, line = 695 baseaddr = 0x8b5f9800
[ 6.293929] mem_remap_type: phys_addr:0x8b5f9800 size:0x00010000 npages:17 vaddr:ffffff800b857800 offset:0x00000800
[ 6.304496] i = 0, head_addr = 0xffffff800b8578f0, data_addr = 0xffffff800b85acb0
[ 6.312069] i = 1, head_addr = 0xffffff800b857850, data_addr = 0xffffff800b857cb0
[ 6.319643] i = 2, head_addr = 0xffffff800b857918, data_addr = 0xffffff800b85acb0
[ 6.327216] i = 3, head_addr = 0xffffff800b857878, data_addr = 0xffffff800b8594b0
[ 6.334790] <<<<<<<<<<<<<<mailbox_create_box cpu_id = 0>>>>>>>>>>>>>>
[ 6.341308] ******************func = mailbox_init_all_handle line = 530 src_id = 1 dst_id = 4******************
[ 6.351519] ******************func = mailbox_init_all_handle line = 530 src_id = 0 dst_id = 4******************
[ 6.361731] ******************func = mailbox_init_all_handle line = 530 src_id = 4 dst_id = 1******************
[ 6.371943] ******************func = mailbox_init_all_handle line = 530 src_id = 4 dst_id = 0******************
[ 6.383390] mb init OK!
[ 6.386488] mb->local_id = 0 dst_id = 0
[ 6.390375] hifi_misc [I][363913]:ap_ipc_int_init:914: Enter ap_ipc_int_init
[ 6.397511] hifi_misc [I][364147]:ap_ipc_int_init:919: Exit ap_ipc_int_init
[ 6.404647] usbcore: registered new interface driver snd-usb-audio
[ 6.411364] hisi_i2s e804f800.hisi_i2s: Registered as hisi_i2s
[ 6.417348] u32 classifier
[ 6.420086] Actions configured
[ 6.423525] Netfilter messages via NETLINK v0.30.
[ 6.428586] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 6.435070] ctnetlink v0.93: registering with nfnetlink.
[ 6.440813] xt_time: kernel timezone is -0000
[ 6.445568] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.451011] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 6.456995] Initializing XFRM netlink socket
[ 6.461363] NET: Registered protocol family 10
[ 6.466557] mip6: Mobile IPv6
[ 6.469573] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 6.476196] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 6.482423] NET: Registered protocol family 17
[ 6.486928] NET: Registered protocol family 15
[ 6.491438] Bridge firewalling registered
[ 6.496093] Bluetooth: RFCOMM TTY layer initialized
[ 6.501035] Bluetooth: RFCOMM socket layer initialized
[ 6.506243] Bluetooth: RFCOMM ver 1.11
[ 6.510039] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 6.516032] Bluetooth: HIDP socket layer initialized
[ 6.521058] 8021q: 802.1Q VLAN Support v1.8
[ 6.525391] 9pnet: Installing 9P2000 support
[ 6.530246] Registered cp15_barrier emulation handler
[ 6.535596] Registered setend emulation handler
[ 6.540357] registered taskstats version 1
[ 6.546930] Btrfs loaded, crc32c=crc32c-arm64-hw
[ 6.556881] ffd74000.serial: ttyAMA3 at MMIO 0xffd74000 (irq = 21, base_baud = 0) is a PL011 rev2
[ 6.566110] fdf01000.serial: ttyAMA4 at MMIO 0xfdf01000 (irq = 22, base_baud = 0) is a PL011 rev2
[ 6.575193] serial serial0: tty port ttyAMA4 registered
[ 6.580653] uart-pl011 fdf01000.serial: no DMA platform data
[ 6.580704] ssp-pl022 ffd68000.spi: ARM PL022 driver, device ID: 0x00041022
[ 6.580731] ssp-pl022 ffd68000.spi: mapped registers from 0x00000000ffd68000 to ffffff800b8c5000
[ 6.580764] ssp-pl022 ffd68000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
[ 6.586770] ssp-pl022 ff3b3000.spi: ARM PL022 driver, device ID: 0x00041022
[ 6.586792] ssp-pl022 ff3b3000.spi: mapped registers from 0x00000000ff3b3000 to ffffff800b8c7000
[ 6.586818] ssp-pl022 ff3b3000.spi: setup for DMA on RX dma0chan2, TX dma0chan3
[ 6.595359] rt1711_i2c_probe
[ 6.595361] I2C functionality : OK...
[ 6.641150] rt_parse_dt
[ 6.643631] rt1711h_chipID = 0x2171
[ 6.647191] regmap_device_register: name = rt1711-4e
[ 6.652257] rt_regmap_rt1711-4e: rt register cache data init
[ 6.658101] rt_regmap_rt1711-4e: cache cata init successfully
[ 6.664103] tcpc_device_register register tcpc device (type_c_port0)
[ 6.670655] [I/hisi_pd] tcpc_device_register register_pd_wake_unlock_notifier OK
[ 6.678180] PD Timer number = 37
[ 6.681988] tcpci_timer_init : init OK
[ 6.686323] pd_parse_pdata
[ 6.689091] pd_parse_pdata src pdo data =
[ 6.693172] pd_parse_pdata 0: 0x00019064
[ 6.697147] pd_parse_pdata snk pdo data =
[ 6.701205] pd_parse_pdata 0: 0x000190c8
[ 6.705174] pd_parse_pdata 1: 0x0002d0c8
[ 6.709144] pd_parse_pdata id vdos data =
[ 6.713217] pd_parse_pdata 0: 0xd00029cf
[ 6.717188] pd_parse_pdata 1: 0x00000000
[ 6.721154] pd_parse_pdata 2: 0x00010000
[ 6.725123] dpm_caps: local_dr_power
[ 6.728737] dpm_caps: local_dr_data
[ 6.732265] dpm_caps: local_ext_power
[ 6.735968] dpm_caps: local_usb_comm
[ 6.739579] dpm_caps: local_usb_suspend
[ 6.743480] dpm_caps: local_high_cap
[ 6.747095] dpm_caps: local_give_back
[ 6.750797] dpm_caps: local_no_suspend
[ 6.754587] dpm_caps: local_vconn_supply
[ 6.758553] dpm_caps: attemp_discover_cable_dfp
[ 6.763134] dpm_caps: attemp_enter_dp_mode
[ 6.767276] dpm_caps: attemp_discover_cable
[ 6.769376] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIInit_11.8.32.bts failed with error -2
[ 6.769388] hci-ti serial0-0: Falling back to user helper
[ 6.787090] dpm_caps: attemp_discover_id
[ 6.791057] dpm_caps: pr_reject_as_source
[ 6.795113] dpm_caps: pr_reject_as_sink
[ 6.798992] dpm_caps: pr_check_gp_source
[ 6.802959] dpm_caps: pr_check_gp_sink
[ 6.806751] dpm_caps: dr_reject_as_dfp
[ 6.810541] dpm_caps: dr_reject_as_ufp
[ 6.814331] dpm_caps: snk_prefer_low_voltage
[ 6.818649] dpm_caps: snk_ignore_mismatch_current
[ 6.823407] dpm_caps = 0xc010c10b
[ 6.826758] [I/hisi_pd] PE:pd_core_init
[ 6.835259] rt1711_init_alert name = type_c_port0
[ 6.840053] rt1711_init_alert gpio # = 291
[ 6.844213] GPIO requested...
[ 6.847213] rt1711_init_alert : IRQ number = 291
[ 6.851885] rt1711_init_alert : irq initialized...
[ 6.857372] IRQF_NO_THREAD Test
[ 6.864130] [I/hisi_pd] [TCPC-I]SkipAlert:0x0000
[ 6.868961] [I/hisi_pd] TPC-I:typec_init: DRP
[ 6.873851] [I/GPIO_HUB] gpio_hub_change_typec_power: set typec vbus gpio to 0
[ 6.881164] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
[ 6.886977] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
[ 6.893152] [E/GPIO_HUB] gpio_hub_switch_to_hub: switch to hub
[ 6.899052] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:2
[ 6.904865] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:2
[ 6.911029] [USB3][hisi_usb_otg_event]event: 2
[ 6.915529] [I/hisi_pd] TPC-I:** Unattached.SNK
[ 6.915789] [USB3][event_work]+
[ 6.915801] [USB3][handle_event][handle_event] type: 2
[ 6.915809] [USB3][set_vbus_power]set port power 1
[ 6.915826] [dwc3_otg_work]+
[ 6.915826] evt = 2
[ 6.915827] [dwc3_resume_device] +
[ 6.916027] [dwc3_resume_device] -
[ 6.916034] [dwc3_otg_start_host]+
[ 6.916764] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 6.916802] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 6.918241] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010
[ 6.918374] xhci-hcd xhci-hcd.0.auto: irq 337, io mem 0xff100000
[ 6.919955] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.919969] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.919980] usb usb1: Product: xHCI Host Controller
[ 6.919991] usb usb1: Manufacturer: Linux 4.9.77-geae6367a9237 xhci-hcd
[ 6.920002] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 6.921151] hub 1-0:1.0: USB hub found
[ 6.921230] hub 1-0:1.0: 1 port detected
[ 6.922028] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 6.922051] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 6.922235] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.922542] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 6.922555] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.922566] usb usb2: Product: xHCI Host Controller
[ 6.922577] usb usb2: Manufacturer: Linux 4.9.77-geae6367a9237 xhci-hcd
[ 6.922588] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 6.923709] hub 2-0:1.0: USB hub found
[ 6.923777] hub 2-0:1.0: 1 port detected
[ 6.924629] [dwc3_otg_start_host]-
[ 6.924636] [dwc3_otg_work]-
[ 6.924644] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
[ 6.924656] [USB3][handle_event]hisi usb_status: OFF -> HOST
[ 6.924664] [USB3][event_work]-
[ 7.096048] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
[ 7.103532] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
[ 7.112155] tcpc_device_irq_enable : tcpc irq enable OK!
[ 7.113246] [I/hisi_pd] TPC-I:[CC_Alert] 0/5
[ 7.113255] [I/hisi_pd] TPC-I:** AttachWait.SNK
[ 7.126608] rt1711_i2c_probe probe OK!
[ 7.139010] [drm] dss irq = 70.[ 7.142038] [drm] dss_pri_clk:[400000000]->[400000000].
[ 7.147381] [drm] dss_pxl0_clk:[144000000]->[144000000].
[ 7.152763] get_domain_data_lpae:start_addr 0x8000, size 0xbfff8000 align 0x40000
[ 7.160440] [drm] host attach, client name=[adv7533], id=0
[ 7.166551] kirin-drm e8600000.dpe: bound e8601000.dsi (ops dsi_ops)
[ 7.172989] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.179683] [drm] No driver support for vblank timestamp query.
[ 7.187314] [drm] num_crtc=1, num_connector=1.
[ 7.191822] [drm:drm_helper_disable_unused_functions] *ERROR* Called for atomic driver, this is not what you want.
[ 7.202991] kirin-drm e8600000.dpe: No connectors reported connected with modes
[ 7.210397] [drm] Cannot find any crtc or sizes - going 1024x768
[ 7.218027] kirin-drm e8600000.dpe: fb0: dss frame buffer device
[ 7.233812] [I/hisi_pd] TPC-I:[CC_Change] 0/5
[ 7.238394] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
[ 7.240316] [drm] Initialized kirin 1.0.0 20170309 on minor 0
[ 7.240542] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
[ 7.242652] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
[ 7.242691] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
[ 7.242696] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
[ 7.242706] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 56,32 bit host data width,128 deep fifo
[ 7.248340] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 7.296717] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
[ 7.304226] [I/GPIO_HUB] gpio_hub_power_off: gpio hub hub vbus no power set success[ 7.311823] [I/GPIO_HUB] gpio_hub_change_typec_power: typec power no change
[ 7.318922] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:3
[ 7.324754] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:3
[ 7.330931] [USB3][hisi_usb_otg_event]event: 3
[ 7.335444] [USB3][event_work]+
[ 7.335465] [E/GPIO_HUB] gpio_hub_switch_to_typec: switch to typec
[ 7.335468] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:0
[ 7.335470] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:0
[ 7.335472] [USB3][hisi_usb_otg_event]event: 0
[ 7.335495] [I/hisi_pd] TPC-I:** Attached.SNK
[ 7.335498] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
[ 7.335501] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
[ 7.350442] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 7.358686] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
[ 7.358692] [I/hisi_pd] pd_dpm_report_pd_sink_vbus : Sink 5000 mV, 500 mA
[ 7.358695] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
[ 7.358698] [I/hisi_pd] TPC-I:Attached-> SINK
[ 7.358701] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=7,+++
[ 7.358704] [I/hisi_pd] pd_dpm_set_typec_state = 2
[ 7.358706] [I/hisi_pd] pd_dpm_set_cc_orientation cc_orientation =1
[ 7.358720] [I/hisi_pd] [TCPC-I]usb_port_attached
[ 7.358752] [I/hisi_pd] pd_dpm_report_device_attach
[ 7.373891] dwmmc_k3 ff3ff000.dwmmc2: 1 slots initialized
[ 7.374391] hisi_i2s e804f800.hisi_i2s: Failed to get DMA channel capabilities, falling back to period counting: -6
[ 7.374394] asoc-simple-card soc:sound: hdmi-hifi.0 <-> e804f800.hisi_i2s mapping ok
[ 7.392722] otg_wakelock_init: No USB transceiver found
[ 7.393077] input: keys as /devices/platform/keys/input/input0
[ 7.397172] dwmmc_k3 ff3ff000.dwmmc2: card claims to support voltages below defined range
[ 7.397782] rtc-pl031 fff04000.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13)
[ 7.398040] ALSA device list:
[ 7.398041] #0: hikey-hdmi
[ 7.410507] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 7.413545] mmc1: new SDIO card at address 0001
[ 7.414165] wl18xx_driver wl18xx.2.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
[ 7.414167] wl18xx_driver wl18xx.2.auto: Falling back to user helper
[ 7.533179] [USB3][handle_event][handle_event] type: 3
[ 7.533181] [USB3][set_vbus_power]set port power 0
[ 7.533183] [I/hisi_pd] pd_dpm_report_bc12 : PD_WAKE_UNLOCK
[ 7.533186] [I/hisi_pd] pd_dpm_report_bc12 : event (4)
[ 7.533188] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
[ 7.533192] [dwc3_otg_work]+
[ 7.533192] evt = 1
[ 7.533192] [dwc3_otg_stop_host]+
[ 7.533222] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 7.533234] usb usb2: USB disconnect, device number 1
[ 7.735907] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
[ 7.741868] [I/hisi_pd] pd_dpm_handle_pe_event unkonw event
[ 7.748124] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
[ 7.754103] Pending event is same --> ignore this event 2
[ 7.759721] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
[ 7.992948] usb usb2-port1: attempt power cycle
[ 8.313602] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
[ 8.319369] xhci-hcd xhci-hcd.0.auto: remove, state 4
[ 8.324516] usb usb1: USB disconnect, device number 1
[ 8.330189] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
[ 8.336056] [dwc3_otg_stop_host]-
[ 8.339426] [dwc3_suspend_device] +
[ 8.343030] [dwc3_suspend_device] -
[ 8.346584] [dwc3_otg_work]-
[ 8.349503] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock
[ 8.355255] [USB3][handle_event]hiusb_status: HOST -> OFF
[ 8.360722] [USB3][handle_event][handle_event] type: 0
[ 8.676280] [USB3][detect_charger_type]DCD done
[ 8.708262] [USB3][detect_charger_type]Primary Detection done
[ 8.714184] [USB3][detect_charger_type]Secondary Detection done
[ 8.748252] [USB3][detect_charger_type]type: 0
[ 8.752855] [I/hisi_pd] pd_dpm_report_bc12 : event (0)
[ 8.758153] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
[ 8.766113] [dwc3_otg_work]+
evt = 3[ 8.769809] [dwc3_resume_device] +
[ 8.773642] [dwc3_resume_device] -
[ 8.777141] [dwc3_otg_start_peripheral]+
[ 8.781165] [dwc3_otg_start_peripheral]-
[ 8.785185] [dwc3_otg_work]-
[ 8.788145] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
[ 8.793642] [USB3][handle_event]hisi usb status: OFF -> DEVICE
[ 8.799596] [USB3][event_work]-
[ 8.802808] [USB3][event_work]+
[ 8.806016] [USB3][event_work]-
[ 12.468893] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
[ 12.474924] [I/hisi_pd] pd_dpm_handle_pe_event unkonw event
[ 12.481236] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
[ 12.487258] Pending event is same --> ignore this event 2
[ 12.492986] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
[ 17.203982] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
[ 17.210019] [I/hisi_pd] pd_dpm_handle_pe_event unkonw event
[ 17.216339] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
[ 17.222356] Pending event is same --> ignore this event 2
[ 17.228065] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
[ 21.935057] [I/hisi_pd] PE:TYPE-C Only Charger!
[ 21.939999] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
[ 21.946016] [I/hisi_pd] pd_dpm_report_pd_sink_vbus : Sink 5000 mV, 500 mA
[ 21.953024] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
[ 21.960957] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=8,+++
[ 25.220298] ufshcd-hi3660 ff3b0000.ufs: ufshcd_issue_tm_cmd: task management cmd 0x80 timed-out
[ 25.229318] ufshcd-hi3660 ff3b0000.ufs: ufshcd_abort: failed with err -110
[ 25.236545] ufshcd-hi3660 ff3b0000.ufs: ufshcd_task_req_compl: failed, ocs = 0xf
[ 25.244150] ufshcd-hi3660 ff3b0000.ufs: ufshcd_eh_device_reset_handler: failed with err 15
[ 25.434971] ufshcd-hi3660 ff3b0000.ufs: ufshcd_read_desc_param: Failed reading descriptor. desc_id 0 param_offset 0 buff_len 31 ret 0
[ 25.447414] ufshcd-hi3660 ff3b0000.ufs: ufs_get_device_info: Failed reading Device Desc. err = -22
[ 25.456830] ufshcd-hi3660 ff3b0000.ufs: ufs_advertise_fixup_device: Failed getting device info. err = -22
[ 25.469191] ufs final power mode: gear = 3, lane = 2, pwr = 1, rate = 2
[ 25.476040] ufshcd-hi3660 ff3b0000.ufs: set TX_EQUALIZER 3.5db
[ 25.486697] ufshcd-hi3660 ff3b0000.ufs: check TX_EQUALIZER DB value lane0 = 0x1
[ 25.494619] ufshcd-hi3660 ff3b0000.ufs: check TX_EQUALIZER DB value lane1 = 0x1
Raw
hikey960_aosp-flash.log
hikey960 boarid:5301 xloader use UART6
scsysstat_value[0].
clear reset source
last_keypoint0,reboot_type0
secdbg not DCU.
SecDbgVer exit
xloader chipid is: 0x36600110, start at 334ms.
Build Date: Sep 19 2017, 15:34:09
[clock_init] ++
hikey960 [hikey960_clk_init]
hi3660 [clk_setup]
[clock_init] --
storage type is UFS
ufs retry: 6 count v_tx:0 v_rx:0
ufs set v_tx:0 v_rx:0
Hikey960[5301] no need avs_init.
ddr ft:0xf20332a3,mode:1 target:4
UceLdOk
density: 0x00080008,0x00080008,0x00080008,0x00080008,0x00080008,0x00080008,0x00080008,0x00080008
ddr info 0x00000401
400M
685M
1067M
C2R,V0x0000002e e:66
C0R,V0x0000002f e:66
C1R,V0x0000002f e:113
C2R,V0x0000002f e:66
C3R,V0x00000031 e:66
C0R,V0x00000030 e:66
C1R,V0x00000030 e:66
C2R,V0x00000030 e:66
C3R,V0x00000032 e:66
C0R,V0x00000031 e:66
C1R,V0x00000031 e:66
C2R,V0x00000031 e:66
C3R,V0x00000033 e:66
C0R,V0x00000032 e:66
C1R,V0x00000032 e:65
C2R,V0x00000032 e:65
C3R,V0x00000034 e:65
C0R,V0x00000033 e:66
C1R,V0x00000033 e:65
C2R,V0x00000033 e:65
C3R,V0x00000035 e:65
C1R,V0x0000002f e:66
C2R,V0x00000030 e:66
C0R,V0x00000031 e:66
C1R,V0x00000030 e:66
C2R,V0x00000031 e:66
C3R,V0x00000030 e:66
C0R,V0x00000032 e:66
C1R,V0x00000031 e:66
C2R,V0x00000032 e:66
C3R,V0x00000031 e:66
C0R,V0x00000033 e:66
C1R,V0x00000032 e:65
C2R,V0x00000033 e:65
C3R,V0x00000032 e:66
C0R,V0x00000034 e:65
C1R,V0x00000033 e:65
C2R,V0x00000034 e:65
C3R,V0x00000033 e:65
1244M
1866M
C2R,V0x00000013 e:193
C2R,V0x00000014 e:66
C2R,V0x00000015 e:66
C0R,V0x00000016 e:66
C2R,V0x00000016 e:66
C0R,V0x00000017 e:66
C1R,V0x00000017 e:66
C2R,V0x00000017 e:66
C3R,V0x00000017 e:66
C3R,V0x00000016 e:113
C1R,V0x00000017 e:113
C2R,V0x00000017 e:66
C3R,V0x00000017 e:66
pack0Idx0Dcc:0
pack1Idx0Dcc:0
pack2Idx0Dcc:0
pack3Idx0Dcc:0
iomcu_subsys_init
boot_c0 PROFILE 4
slave0 irq0:0x00000004
slave1 irq0:0x00000004
main: ******** Fastboot for Kirin *****************
main: ******** Build Date: Jun 2 2017, 17:34:24 **
main: ******** Fastboot start at 1830 ms **********
main: print soc_id computed in xloader phase, is below:
main: 00000000 main: 00000000 main: 00000000 main: 00000000 main:
main: 00000000 main: 00000000 main: 00000000 main: 00000000 main:
led_alwayson: can't get dtb operators
bbox: bbox_register_module_ops success.
bfm: : >>>>>enter bfm_init
bfm: : [disable_boot_fail_system] boot_fail_system state is 0
clock: PLL Stat
clock: PLL2 ctrl0=0x04909604,ctrl1=0x02000000
clock: PLL2 acpu en_stat:0x00000008, acpu gt_stat:0x00040000
clock: PLL2 final en_stat:0x00100000, final gt_stat:0x00020000
clock: PLL3 ctrl0=0x04904005,ctrl1=0x07000000
clock: PLL3 acpu en_stat:0x00000000, acpu gt_stat:0x00000000
clock: PLL3 final en_stat:0x00200000, final gt_stat:0x00040000
clock: clock init OK
ufs: ufs start on platform[36600110]ufs: ufs current mode: 0x00000011
ufs: ufs current gear: 0x00000003
ufs: ufs mphy reg 0x4A = 0x00000000
ufs: bUD0BaseOffset: 0x00000010, bUDConfigPLength: 0x00000010
ufs: UFS device manufacturerid = 0x000001ad
ufs: UFS device: H****
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02000001, mntnStageCode is 27
bfm: : <<<<<exit set_boot_stage.
storage: emmc_ops invalid
storage: storage type is UFS
bfm: : bfm system is disabled!
storage: emmc_init: BL2_STAGE_EMMC_OK is 33554435!
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02000003, mntnStageCode is 29
bfm: : <<<<<exit set_boot_stage.
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010001, mntnStageCode is 30
bfm: : <<<<<exit set_boot_stage.
ddr: current logic version is lpddr4 verison !!!
ddr: ddr size is 4096MB
bbox: register modid [0x81fff200]
bbox: register exception succeed.
bbox: register modid [0x81fff202]
bbox: register exception succeed.
bbox: register modid [0x81fff20b]
bbox: register exception succeed.
watchdog: Enable watchdog start
boardid: [BDID]boardid: 5301
gpio: hikey960_gpio_init: GPIO 46 202 206 ouput low, GPIO 219 pullup.
load_kernel: register_update_dt_ops for usb!
secureboot: Enter secboot_init: set pll efuse flag!
secureboot: pll efuse flag has been succ set!bbox: register modid [0x81fff20a]
bbox: register exception succeed.
secureboot: SECBOOT_DEV_INFO_DADDR = 0x1d7fff00, SECBOOT_DEV_INFO_SIZE = 0x00000040!
dtimage: number of dtb = 1
dtimage: =========uncompress_dtb_addr=[0x16f00000],====vrl_addr=[0x1b0e64e0]====
dtimage: [device_tree_get_dtb_entry:215] Verify Not Exist
dtimage: fdt_init success!
dtimage: -----can not find hisilicon,fastboot node by compatible
dtimage: -----can not find hisilicon,fastboot node by compatible
load_kernel: register_update_dt_ops for led!
reboot_reason: scsysstat_value is 0x00000000
pmu: can not find fastboot,hisi-pmic-mntn node1
pmu: pmu_property_read_u32 fastboot,hisi-pmic-mntn, hisilicon,data-width, failed
pmu: pmu_mntn_record_dts_parse failed!
bbox: save_tempbuffer_to_loop_area():727:storage_read fail[-1]
reboot_reason: reboot_reason is AP_S_COLDBOOT
reboot_reason: clear_reset_source in!
reboot_reason: tmp =0x0effcc70
dtimage: -----can not find fastboot,charger node by compatible
power: get_chargerIC_type: getU32byCompatible fastboot,charger, hw_charger_type failed!
dtimage: -----can not find fastboot,coul node by compatible
power: get_coul_type: get coul_type failed!
power: get coul_type failed!
power: hi6421v500 register coulometer ops fail!
dtimage: -----can not find huawei,hisi_bci_battery node by compatible
no_module: [hi6523_get_config_info]: can't get battery board type
dtimage: -----can not find fastboot,charger node by compatible
no_module: get hi6523 i2c reg num fail!
dtimage: -----can not find fastboot,charger node by compatible
no_module: [hi6523_start_charging_by_init_params]: get ichrg_pre_limit fail
dtimage: -----can not find huawei,hi6523_charger node by compatible
no_module: [hi6523_start_charging_by_init_params]: get reg fail
dtimage: -----can not find fastboot,buckboost node by compatible
max77813: get_buckboost_type: getU32byCompatible fastboot,buckboost, hw_buckboost_type failed!
max77813: get dts buckboost type fail!
cpu_buck: pmu type3 not registered
cpu_buck: Bad cpu buck info:1
bbox: Could not find path /rdr
bbox: Could not find status property.
mntn: tele_mntn_stat_point_init: can not bbox_ops !
dtimage: -----can not find hisilicon,fastboot node by compatible
mntn: [tele_mntn_m3_wdt_config]: getU32byCompatible(hisilicon,fastboot, lpm3-board-type) error!
mntn: mntn init
mntndump: enable_reserved_ddr_dts: Could not find path /reserved-memory/mntndump
mntndump: mntn_dump_init failed
mntndump: get_mntn_dump_addr:mid[2] is not init
mntn: kernel dump is not available
mntn: reboot_type is 0
mntn:
no need to dump_mem...
mntn: enter [registe_pstore_ramoops_dump]
mntndump: get_mntn_dump_addr:mid[5] is not init
mntn: no mdump_pstore info
mntn: M3_RDR_SYS_CONTEXT_BASE_ADDR is null
uart_cfg: [MNTN]:Could not find node.
uart_cfg: set_default_uart_cfg: uart_from_dts_read failed!
uart_cfg: module_idx 2, uart_no 6
uart_cfg: odule_idx 11, uart_no 15
uart_cfg: module_idx 2, uart_no 6
uart_cfg: getU32byCompatible(hisilicon,fastboot, uart-board-type) error!
uart_cfg: boardid: 5301 use uart port: 6
pasr: in pasr_init-43 ...ddr: current logic version is lpddr4 verison !!!
ddr: current logic version is lpddr4 verison !!!
dtimage: -----can not find huawei,lcd_panel_type node by compatible
display: [display]get_detect_type: huawei,lcd_panel_type: get detect_type fail
display: lcd:no lcd detect_type
no_module: [LOGO] get_logo_buffer_from_dtsi: Could not find path /reserved-memory/logo-buffer.
no_module: [LOGO] logo_init: logo init failed!!! used the default fb addr.
display: [display]jdi_nt35696_panel_init: lcd type is not JDI_NT35696_5P5_LCD.
display: [display]jdi_otm2503b_panel_init: lcd type is not JDI_OTM2503B_5P5_LCD.
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010002, mntnStageCode is 31
bfm: : <<<<<exit set_boot_stage.
dtimage: -----can not find huawei,lcd_panel_type node by compatible
display: [display]get_dts_value: can not get huawei,lcd_panel_type, bl_bus_id=4!
dtimage: -----can not find ti,lm36923 node by compatible
display: [display]get_dts_value: can not get ti,lm36923, support=0!
display: get lm36923_support failed!
Audio_codec: [audio]:Could not find "hisilicon,codec-controller" node.
load_teeos: can not find fb node fingerprint
load_teeos: failed to find fb node ese_config
display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010003, mntnStageCode is 32
bfm: : <<<<<exit set_boot_stage.
preboot: GPIO_068_SEL connect GND enter fastboot mode.
watchdog: Disable watchdog start
bfm: : [disable_boot_fail_system] boot_fail_system state is 0
rescue: ^^^^^^^^^[rescue_init] ok !
usbloader: bootmode is 4
usb: [USBFINFO]USB RESET
usb: [USBFINFO]USB CONNDONE, highspeed
usb: [USBFINFO]USB RESET
usb: [USBFINFO]USB CONNDONE, highspeed
usbloader: usb: online (highspeed)
usb: [USBFINFO]usb enum done
usbloader: usb_rx_cmd_complete() 'getvar:product', size is 0x0000000e
usbloader: usb_rx_cmd_complete() 'getvar:version', size is 0x0000000e
usbloader: usb_rx_cmd_complete() 'getvar:version-bootloader', size is 0x00000019
usbloader: usb_rx_cmd_complete() 'getvar:serialno', size is 0x0000000f
usbloader: usb_rx_cmd_complete() 'getvar:secure', size is 0x0000000d
usbloader: usb_rx_cmd_complete() 'getvar:has-slot:xloader', size is 0x00000017
usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'download:00025c80', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:xloader', size is 0x0000000d
secureboot: SecBoot_GetVrlOffset: get ptn offset error!
secureboot: SecBoot_GetVrlOffset: get ptn offset error!
usbloader: writing 154752 bytes to 'xloader'...
secureboot: SecBoot_WriteVRL: imageNamePtr:xloader, vrl_offset:0x00000000
usbloader: can get secdbg_ops!
secdbg: save_secdbg_img_func: entering
secdbg: get_xloader_img_size: entering
secdbg: get_xloader_img_size: exit
secdbg: read_secdbg_img_from_emmc: entering
secdbg: verify_secdbg_img: entering
secdbg: verify_secdbg_img: magic value or version in Developer certificate are invalid.
secdbg: read_secdbg_img_from_emmc: secdbg image verified failure
secdbg: save_secdbg_img_func: read secure debug image failure
usbloader: pre-save secure debug image fail!
secureboot: SecBoot_WriteVRL: imageNamePtr:xloader, vrl_offset:0x00000000
secureboot: SecBoot_WriteVRL: ERR: FLASH_WRITE
usbloader: - FAIL
usbloader: usb_rx_cmd_complete() 'getvar:has-slot:ptable', size is 0x00000016
usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'download:00031000', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:ptable', size is 0x0000000c
usbloader: [auto_resize]:start amend ptable
usbloader: [auto_resize]:Success to resize ptable image
usbloader: usb_rx_cmd_complete() 'getvar:has-slot:fastboot', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'download:00344800', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:fastboot', size is 0x0000000e
usbloader: writing 3426304 bytes to 'fastboot'...
usbloader:
partition 'fastboot' updated
usbloader: - OKAY
reboot_reason: set_reboot_type is 0x00000013.
usbloader: usb_rx_cmd_complete() 'reboot-bootloader', size is 0x00000011
ufs: ufs power mode = 0x00000033
usbloader: reboot bootloader
reboot_reason: set_reboot_type is 0x00000001.
reboot_reason: tmp =0x8effcc70
hikey960 boarid:5301 xloader use UART6
scsysstat_value[8].
clear reset source
last_keypoint32,reboot_type1
secdbg not DCU.
SecDbgVer exit
xloader chipid is: 0x36600110, start at 333ms.
Build Date: Sep 19 2017, 15:34:09
[clock_init] ++
hikey960 [hikey960_clk_init]
hi3660 [clk_setup]
[clock_init] --
storage type is UFS
ufs retry: 6 count v_tx:0 v_rx:0
ufs set v_tx:0 v_rx:0
Hikey960[5301] no need avs_init.
ddr ft:0xf20332a3,mode:1 target:4
UceLdOk
density: 0x00080008,0x00080008,0x00080008,0x00080008,0x00080008,0x00080008,0x00080008,0x00080008
ddr info 0x00000401
400M
685M
1067M
C2R,V0x0000002e e:66
C0R,V0x0000002f e:66
C2R,V0x0000002f e:66
C3R,V0x00000031 e:66
C0R,V0x00000030 e:66
C1R,V0x0000002f e:113
C2R,V0x00000030 e:66
C3R,V0x00000032 e:66
C0R,V0x00000031 e:66
C1R,V0x00000030 e:66
C2R,V0x00000031 e:66
C3R,V0x00000033 e:66
C0R,V0x00000032 e:66
C1R,V0x00000031 e:66
C2R,V0x00000032 e:65
C3R,V0x00000034 e:65
C0R,V0x00000033 e:66
C1R,V0x00000032 e:65
C2R,V0x00000033 e:65
C3R,V0x00000035 e:65
C1R,V0x0000002f e:66
C2R,V0x00000030 e:66
C0R,V0x00000031 e:66
C1R,V0x00000030 e:66
C2R,V0x00000031 e:66
C3R,V0x00000030 e:66
C0R,V0x00000032 e:66
C1R,V0x00000031 e:66
C2R,V0x00000032 e:66
C3R,V0x00000031 e:66
C0R,V0x00000033 e:66
C1R,V0x00000032 e:65
C2R,V0x00000033 e:65
C3R,V0x00000032 e:66
C0R,V0x00000034 e:65
C1R,V0x00000033 e:65
C2R,V0x00000034 e:65
C3R,V0x00000033 e:65
1244M
1866M
C2R,V0x00000013 e:193
C2R,V0x00000014 e:66
C0R,V0x00000015 e:193
C2R,V0x00000015 e:66
C0R,V0x00000016 e:66
C2R,V0x00000016 e:66
C0R,V0x00000017 e:66
C1R,V0x00000017 e:66
C2R,V0x00000017 e:66
C3R,V0x00000017 e:66
C2R,V0x00000016 e:193
C3R,V0x00000016 e:113
C1R,V0x00000017 e:113
C2R,V0x00000017 e:66
C3R,V0x00000017 e:66
pack0Idx0Dcc:0
pack1Idx0Dcc:0
pack2Idx0Dcc:0
pack3Idx0Dcc:0
iomcu_subsys_init
boot_c0 PROFILE 4
main: ******** Fastboot for Kirin *****************
main: ******** Build Date: Jun 2 2017, 17:34:24 **
main: ******** Fastboot start at 1692 ms **********
main: print soc_id computed in xloader phase, is below:
main: 00000000 main: 00000000 main: 00000000 main: 00000000 main:
main: 00000000 main: 00000000 main: 00000000 main: 00000000 main:
led_alwayson: can't get dtb operators
bbox: bbox_register_module_ops success.
bfm: : >>>>>enter bfm_init
bfm: : [disable_boot_fail_system] boot_fail_system state is 0
clock: PLL Stat
clock: PLL2 ctrl0=0x04909604,ctrl1=0x02000000
clock: PLL2 acpu en_stat:0x00000008, acpu gt_stat:0x00040000
clock: PLL2 final en_stat:0x00100000, final gt_stat:0x00020000
clock: PLL3 ctrl0=0x04904005,ctrl1=0x07000000
clock: PLL3 acpu en_stat:0x00000000, acpu gt_stat:0x00000000
clock: PLL3 final en_stat:0x00200000, final gt_stat:0x00040000
clock: clock init OK
ufs: ufs start on platform[36600110]ufs: ufs current mode: 0x00000011
ufs: ufs current gear: 0x00000003
ufs: ufs mphy reg 0x4A = 0x00000000
ufs: bUD0BaseOffset: 0x00000010, bUDConfigPLength: 0x00000010
ufs: UFS device manufacturerid = 0x000001ad
ufs: UFS device: H****
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02000001, mntnStageCode is 27
bfm: : <<<<<exit set_boot_stage.
storage: emmc_ops invalid
storage: storage type is UFS
bfm: : bfm system is disabled!
storage: emmc_init: BL2_STAGE_EMMC_OK is 33554435!
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02000003, mntnStageCode is 29
bfm: : <<<<<exit set_boot_stage.
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010001, mntnStageCode is 30
bfm: : <<<<<exit set_boot_stage.
ddr: current logic version is lpddr4 verison !!!
ddr: ddr size is 4096MB
bbox: register modid [0x81fff200]
bbox: register exception succeed.
bbox: register modid [0x81fff202]
bbox: register exception succeed.
bbox: register modid [0x81fff20b]
bbox: register exception succeed.
watchdog: Enable watchdog start
boardid: [BDID]boardid: 5301
gpio: hikey960_gpio_init: GPIO 46 202 206 ouput low, GPIO 219 pullup.
load_kernel: register_update_dt_ops for usb!
secureboot: Enter secboot_init: set pll efuse flag!
secureboot: pll efuse flag has been succ set!bbox: register modid [0x81fff20a]
bbox: register exception succeed.
secureboot: SECBOOT_DEV_INFO_DADDR = 0x1d7fff00, SECBOOT_DEV_INFO_SIZE = 0x00000040!
dtimage: number of dtb = 1
dtimage: =========uncompress_dtb_addr=[0x16f00000],====vrl_addr=[0x1b0e64e0]====
dtimage: [device_tree_get_dtb_entry:215] Verify Not Exist
dtimage: fdt_init success!
dtimage: -----can not find hisilicon,fastboot node by compatible
dtimage: -----can not find hisilicon,fastboot node by compatible
load_kernel: register_update_dt_ops for led!
dtimage: -----can not find hisilicon,fastboot node by compatible
vibrator: vibrator_delay: hisilicon,fastboot motor-vib_type failed!
dtimage: -----can not find hisilicon,fastboot node by compatible
vibrator: vibrator_off: hisilicon,fastboot motor-vib_type failed!
reboot_reason: scsysstat_value is 0x00000008
pmu: can not find fastboot,hisi-pmic-mntn node1
pmu: pmu_property_read_u32 fastboot,hisi-pmic-mntn, hisilicon,data-width, failed
pmu: pmu_mntn_record_dts_parse failed!
reboot_reason: enter [check_hardware_reset]
reboot_reason: Could not find path /sysctrl_reason
reboot_reason: get_sysctrl_reason_data is error
ddr: reset dmc_rint_0:00000000
ddr: reset dmc_rint_1:00000000
ddr: reset dmc_rint_2:00000000
ddr: reset dmc_rint_3:00000000
ddr: new dmc_rint_0:00000000
ddr: new dmc_rint_1:00000000
ddr: new dmc_rint_2:00000000
ddr: new dmc_rint_3:00000000
bbox: save_tempbuffer_to_loop_area():727:storage_read fail[-1]
reboot_reason: reboot_reason is bootloader
reboot_reason: clear_reset_source in!
reboot_reason: tmp =0x0effcc70
dtimage: -----can not find fastboot,charger node by compatible
power: get_chargerIC_type: getU32byCompatible fastboot,charger, hw_charger_type failed!
dtimage: -----can not find fastboot,coul node by compatible
power: get_coul_type: get coul_type failed!
power: get coul_type failed!
power: hi6421v500 register coulometer ops fail!
dtimage: -----can not find huawei,hisi_bci_battery node by compatible
no_module: [hi6523_get_config_info]: can't get battery board type
dtimage: -----can not find fastboot,charger node by compatible
no_module: get hi6523 i2c reg num fail!
dtimage: -----can not find fastboot,charger node by compatible
no_module: [hi6523_start_charging_by_init_params]: get ichrg_pre_limit fail
dtimage: -----can not find huawei,hi6523_charger node by compatible
no_module: [hi6523_start_charging_by_init_params]: get reg fail
dtimage: -----can not find fastboot,buckboost node by compatible
max77813: get_buckboost_type: getU32byCompatible fastboot,buckboost, hw_buckboost_type failed!
max77813: get dts buckboost type fail!
cpu_buck: pmu type3 not registered
cpu_buck: Bad cpu buck info:1
bbox: Could not find path /rdr
bbox: Could not find status property.
mntn: tele_mntn_stat_point_init: can not bbox_ops !
dtimage: -----can not find hisilicon,fastboot node by compatible
mntn: [tele_mntn_m3_wdt_config]: getU32byCompatible(hisilicon,fastboot, lpm3-board-type) error!
mntn: mntn init
mntndump: enable_reserved_ddr_dts: Could not find path /reserved-memory/mntndump
mntndump: mntn_dump_init failed
mntndump: get_mntn_dump_addr:mid[2] is not init
mntn: kernel dump is not available
mntn: reboot_type is 1
mntn:
no need to dump_mem...
mntn: enter [registe_pstore_ramoops_dump]
mntndump: get_mntn_dump_addr:mid[5] is not init
mntn: no mdump_pstore info
mntn: M3_RDR_SYS_CONTEXT_BASE_ADDR is null
uart_cfg: [MNTN]:Could not find node.
uart_cfg: set_default_uart_cfg: uart_from_dts_read failed!
uart_cfg: module_idx 2, uart_no 6
uart_cfg: odule_idx 11, uart_no 15
uart_cfg: module_idx 2, uart_no 6
uart_cfg: getU32byCompatible(hisilicon,fastboot, uart-board-type) error!
uart_cfg: boardid: 5301 use uart port: 6
pasr: in pasr_init-43 ...ddr: current logic version is lpddr4 verison !!!
ddr: current logic version is lpddr4 verison !!!
dtimage: -----can not find huawei,lcd_panel_type node by compatible
display: [display]get_detect_type: huawei,lcd_panel_type: get detect_type fail
display: lcd:no lcd detect_type
no_module: [LOGO] get_logo_buffer_from_dtsi: Could not find path /reserved-memory/logo-buffer.
no_module: [LOGO] logo_init: logo init failed!!! used the default fb addr.
display: [display]jdi_nt35696_panel_init: lcd type is not JDI_NT35696_5P5_LCD.
display: [display]jdi_otm2503b_panel_init: lcd type is not JDI_OTM2503B_5P5_LCD.
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010002, mntnStageCode is 31
bfm: : <<<<<exit set_boot_stage.
dtimage: -----can not find huawei,lcd_panel_type node by compatible
display: [display]get_dts_value: can not get huawei,lcd_panel_type, bl_bus_id=4!
dtimage: -----can not find ti,lm36923 node by compatible
display: [display]get_dts_value: can not get ti,lm36923, support=0!
display: get lm36923_support failed!
Audio_codec: [audio]:Could not find "hisilicon,codec-controller" node.
load_teeos: can not find fb node fingerprint
load_teeos: failed to find fb node ese_config
display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010003, mntnStageCode is 32
bfm: : <<<<<exit set_boot_stage.
preboot: GPIO_068_SEL connect GND enter fastboot mode.
watchdog: Disable watchdog start
bfm: : [disable_boot_fail_system] boot_fail_system state is 0
rescue: ^^^^^^^^^[rescue_init] ok !
usbloader: bootmode is 4
usb: [USBFINFO]USB RESET
usb: [USBFINFO]USB CONNDONE, highspeed
usb: [USBFINFO]USB RESET
usb: [USBFINFO]USB CONNDONE, highspeed
usbloader: usb: online (highspeed)
usb: [USBFINFO]usb enum done
usbloader: usb_rx_cmd_complete() 'getvar:has-slot:nvme', size is 0x00000014
usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'download:00020000', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:nvme', size is 0x0000000a
secureboot: SecBoot_GetVrlOffset: get ptn offset error!
secureboot: SecBoot_GetVrlOffset: get ptn offset error!
usbloader: writing 131072 bytes to 'nvme'...
usbloader:
partition 'nvme' updated
usbloader: - OKAY
reboot_reason: set_reboot_type is 0x00000013.
usbloader: usb_rx_cmd_complete() 'getvar:has-slot:fw_lpm3', size is 0x00000017
usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'download:00035100', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:fw_lpm3', size is 0x0000000d
usbloader: writing 217344 bytes to 'fw_lpm3'...
usbloader:
partition 'fw_lpm3' updated
usbloader: - OKAY
reboot_reason: set_reboot_type is 0x00000013.
usbloader: usb_rx_cmd_complete() 'getvar:has-slot:trustfirmware', size is 0x0000001d
usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'download:000245e8', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:trustfirmware', size is 0x00000013
usbloader: writing 148968 bytes to 'trustfirmware'...
usbloader:
partition 'trustfirmware' updated
usbloader: - OKAY
reboot_reason: set_reboot_type is 0x00000013.
usbloader: usb_rx_cmd_complete() 'getvar:has-slot:boot', size is 0x00000014
usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'download:009df800', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:boot', size is 0x0000000a
usbloader: writing 10352640 bytes to 'boot'...
usbloader:
partition 'boot' updated
usbloader: - OKAY
reboot_reason: set_reboot_type is 0x00000013.
usbloader: usb_rx_cmd_complete() 'getvar:has-slot:dts', size is 0x00000013
usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'download:00003800', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:dts', size is 0x00000009
usbloader: writing 14336 bytes to 'dts'...
usbloader:
partition 'dts' updated
usbloader: - OKAY
reboot_reason: set_reboot_type is 0x00000013.
usbloader: usb_rx_cmd_complete() 'getvar:has-slot:system', size is 0x00000016
usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'download:1c1ff0ac', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:system', size is 0x0000000c
usbloader: writing 471855276 bytes to 'system'...
usbloader: partition 'system' image is in sparse format
storage: storage_erase: partition system
usbloader: partition 'system' erased before flash
usbloader:
partition 'system' updated
usbloader: - OKAY
usbloader: usb_rx_cmd_complete() 'download:19d52058', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:system', size is 0x0000000c
usbloader: writing 433397848 bytes to 'system'...
usbloader: partition 'system' image is in sparse format
usbloader:
partition 'system' updated
usbloader: - OKAY
usbloader: usb_rx_cmd_complete() 'download:06e5e088', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:system', size is 0x0000000c
usbloader: writing 115728520 bytes to 'system'...
usbloader: partition 'system' image is in sparse format
usbloader:
partition 'system' updated
usbloader: - OKAY
usbloader: usb_rx_cmd_complete() 'getvar:has-slot:cache', size is 0x00000015
usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'download:0000e094', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:cache', size is 0x0000000b
usbloader: writing 57492 bytes to 'cache'...
usbloader: partition 'cache' image is in sparse format
storage: storage_erase: partition cache
usbloader: partition 'cache' erased before flash
usbloader:
partition 'cache' updated
usbloader: - OKAY
usbloader: usb_rx_cmd_complete() 'getvar:has-slot:userdata', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'download:004b82a4', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:userdata', size is 0x0000000e
usbloader: writing 4948644 bytes to 'userdata'...
usbloader: partition 'userdata' image is in sparse format
storage: storage_erase: partition userdata
usbloader: partition 'userdata' erased before flash
usbloader:
partition 'userdata' updated
usbloader: - OKAY
usbloader: usb_rx_cmd_complete() 'reboot', size is 0x00000006
ufs: ufs power mode = 0x00000033
usbloader: reboot kernel
reboot_reason: set_reboot_type is 0x00000010.
reboot_reason: tmp =0x8effcc70
hikey960 boarid:5301 xloader use UART6
scsysstat_value[8].
clear reset source
last_keypoint32,reboot_type16
secdbg not DCU.
SecDbgVer exit
xloader chipid is: 0x36600110, start at 330ms.
Build Date: Sep 19 2017, 15:34:09
[clock_init] ++
hikey960 [hikey960_clk_init]
hi3660 [clk_setup]
[clock_init] --
storage type is UFS
ufs retry: 6 count v_tx:0 v_rx:0
ufs set v_tx:0 v_rx:0
Hikey960[5301] no need avs_init.
ddr ft:0xf20332a3,mode:1 target:4
UceLdOk
density: 0x00080008,0x00080008,0x00080008,0x00080008,0x00080008,0x00080008,0x00080008,0x00080008
ddr info 0x00000401
400M
685M
1067M
C2R,V0x0000002e e:66
C0R,V0x0000002f e:66
C1R,V0x0000002f e:113
C2R,V0x0000002f e:66
C3R,V0x00000031 e:66
C0R,V0x00000030 e:66
C1R,V0x00000030 e:66
C2R,V0x00000030 e:66
C3R,V0x00000032 e:66
C0R,V0x00000031 e:66
C1R,V0x00000031 e:66
C2R,V0x00000031 e:66
C3R,V0x00000033 e:66
C0R,V0x00000032 e:66
C1R,V0x00000032 e:65
C2R,V0x00000032 e:65
C3R,V0x00000034 e:65
C0R,V0x00000033 e:66
C1R,V0x00000033 e:65
C2R,V0x00000033 e:65
C3R,V0x00000035 e:65
C2R,V0x0000002f e:113
C0R,V0x00000031 e:66
C1R,V0x00000030 e:66
C2R,V0x00000030 e:66
C3R,V0x00000030 e:66
C0R,V0x00000032 e:66
C1R,V0x00000031 e:66
C2R,V0x00000031 e:66
C3R,V0x00000031 e:66
C0R,V0x00000033 e:66
C1R,V0x00000032 e:66
C2R,V0x00000032 e:65
C3R,V0x00000032 e:66
C0R,V0x00000034 e:65
C1R,V0x00000033 e:65
C2R,V0x00000033 e:65
C3R,V0x00000033 e:65
1244M
1866M
C2R,V0x00000013 e:193
C2R,V0x00000014 e:66
C0R,V0x00000015 e:193
C2R,V0x00000015 e:66
C0R,V0x00000016 e:66
C2R,V0x00000016 e:66
C0R,V0x00000017 e:66
C1R,V0x00000017 e:66
C2R,V0x00000017 e:66
C3R,V0x00000017 e:66
C2R,V0x00000015 e:66
C2R,V0x00000016 e:66
C3R,V0x00000016 e:113
C2R,V0x00000017 e:66
C3R,V0x00000017 e:66
pack0Idx0Dcc:0
pack1Idx0Dcc:0
pack2Idx0Dcc:0
pack3Idx0Dcc:0
iomcu_subsys_init
boot_c0 PROFILE 4
main: ******** Fastboot for Kirin *****************
main: ******** Build Date: Jun 2 2017, 17:34:24 **
main: ******** Fastboot start at 1691 ms **********
main: print soc_id computed in xloader phase, is below:
main: 00000000 main: 00000000 main: 00000000 main: 00000000 main:
main: 00000000 main: 00000000 main: 00000000 main: 00000000 main:
led_alwayson: can't get dtb operators
bbox: bbox_register_module_ops success.
bfm: : >>>>>enter bfm_init
bfm: : [disable_boot_fail_system] boot_fail_system state is 0
clock: PLL Stat
clock: PLL2 ctrl0=0x04909604,ctrl1=0x02000000
clock: PLL2 acpu en_stat:0x00000008, acpu gt_stat:0x00040000
clock: PLL2 final en_stat:0x00100000, final gt_stat:0x00020000
clock: PLL3 ctrl0=0x04904005,ctrl1=0x07000000
clock: PLL3 acpu en_stat:0x00000000, acpu gt_stat:0x00000000
clock: PLL3 final en_stat:0x00200000, final gt_stat:0x00040000
clock: clock init OK
ufs: ufs start on platform[36600110]ufs: ufs current mode: 0x00000011
ufs: ufs current gear: 0x00000003
ufs: ufs mphy reg 0x4A = 0x00000000
ufs: bUD0BaseOffset: 0x00000010, bUDConfigPLength: 0x00000010
ufs: UFS device manufacturerid = 0x000001ad
ufs: UFS device: H****
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02000001, mntnStageCode is 27
bfm: : <<<<<exit set_boot_stage.
storage: emmc_ops invalid
storage: storage type is UFS
bfm: : bfm system is disabled!
storage: emmc_init: BL2_STAGE_EMMC_OK is 33554435!
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02000003, mntnStageCode is 29
bfm: : <<<<<exit set_boot_stage.
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010001, mntnStageCode is 30
bfm: : <<<<<exit set_boot_stage.
ddr: current logic version is lpddr4 verison !!!
ddr: ddr size is 4096MB
bbox: register modid [0x81fff200]
bbox: register exception succeed.
bbox: register modid [0x81fff202]
bbox: register exception succeed.
bbox: register modid [0x81fff20b]
bbox: register exception succeed.
watchdog: Enable watchdog start
boardid: [BDID]boardid: 5301
gpio: hikey960_gpio_init: GPIO 46 202 206 ouput low, GPIO 219 pullup.
load_kernel: register_update_dt_ops for usb!
secureboot: Enter secboot_init: set pll efuse flag!
secureboot: pll efuse flag has been succ set!bbox: register modid [0x81fff20a]
bbox: register exception succeed.
secureboot: SECBOOT_DEV_INFO_DADDR = 0x1d7fff00, SECBOOT_DEV_INFO_SIZE = 0x00000040!
dtimage: number of dtb = 1
dtimage: =========uncompress_dtb_addr=[0x16f00000],====vrl_addr=[0x1b0e64e0]====
dtimage: [device_tree_get_dtb_entry:215] Verify Not Exist
dtimage: fdt_init success!
dtimage: -----can not find hisilicon,fastboot node by compatible
dtimage: -----can not find hisilicon,fastboot node by compatible
load_kernel: register_update_dt_ops for led!
dtimage: -----can not find hisilicon,fastboot node by compatible
vibrator: vibrator_delay: hisilicon,fastboot motor-vib_type failed!
dtimage: -----can not find hisilicon,fastboot node by compatible
vibrator: vibrator_off: hisilicon,fastboot motor-vib_type failed!
reboot_reason: scsysstat_value is 0x00000008
pmu: can not find fastboot,hisi-pmic-mntn node1
pmu: pmu_property_read_u32 fastboot,hisi-pmic-mntn, hisilicon,data-width, failed
pmu: pmu_mntn_record_dts_parse failed!
reboot_reason: enter [check_hardware_reset]
reboot_reason: Could not find path /sysctrl_reason
reboot_reason: get_sysctrl_reason_data is error
ddr: reset dmc_rint_0:00000000
ddr: reset dmc_rint_1:00000000
ddr: reset dmc_rint_2:00000000
ddr: reset dmc_rint_3:00000000
ddr: new dmc_rint_0:00000000
ddr: new dmc_rint_1:00000000
ddr: new dmc_rint_2:00000000
ddr: new dmc_rint_3:00000000
bbox: save_tempbuffer_to_loop_area():727:storage_read fail[-1]
reboot_reason: reboot_reason is coldboot
reboot_reason: clear_reset_source in!
reboot_reason: tmp =0x0effcc70
dtimage: -----can not find fastboot,charger node by compatible
power: get_chargerIC_type: getU32byCompatible fastboot,charger, hw_charger_type failed!
dtimage: -----can not find fastboot,coul node by compatible
power: get_coul_type: get coul_type failed!
power: get coul_type failed!
power: hi6421v500 register coulometer ops fail!
dtimage: -----can not find huawei,hisi_bci_battery node by compatible
no_module: [hi6523_get_config_info]: can't get battery board type
dtimage: -----can not find fastboot,charger node by compatible
no_module: get hi6523 i2c reg num fail!
dtimage: -----can not find fastboot,charger node by compatible
no_module: [hi6523_start_charging_by_init_params]: get ichrg_pre_limit fail
dtimage: -----can not find huawei,hi6523_charger node by compatible
no_module: [hi6523_start_charging_by_init_params]: get reg fail
dtimage: -----can not find fastboot,buckboost node by compatible
max77813: get_buckboost_type: getU32byCompatible fastboot,buckboost, hw_buckboost_type failed!
max77813: get dts buckboost type fail!
cpu_buck: pmu type3 not registered
cpu_buck: Bad cpu buck info:1
bbox: Could not find path /rdr
bbox: Could not find status property.
mntn: tele_mntn_stat_point_init: can not bbox_ops !
dtimage: -----can not find hisilicon,fastboot node by compatible
mntn: [tele_mntn_m3_wdt_config]: getU32byCompatible(hisilicon,fastboot, lpm3-board-type) error!
mntn: mntn init
mntndump: enable_reserved_ddr_dts: Could not find path /reserved-memory/mntndump
mntndump: mntn_dump_init failed
mntndump: get_mntn_dump_addr:mid[2] is not init
mntn: kernel dump is not available
mntn: reboot_type is 16
mntn:
no need to dump_mem...
mntn: enter [registe_pstore_ramoops_dump]
mntndump: get_mntn_dump_addr:mid[5] is not init
mntn: no mdump_pstore info
mntn: M3_RDR_SYS_CONTEXT_BASE_ADDR is null
uart_cfg: [MNTN]:Could not find node.
uart_cfg: set_default_uart_cfg: uart_from_dts_read failed!
uart_cfg: module_idx 2, uart_no 6
uart_cfg: odule_idx 11, uart_no 15
uart_cfg: module_idx 2, uart_no 6
uart_cfg: getU32byCompatible(hisilicon,fastboot, uart-board-type) error!
uart_cfg: boardid: 5301 use uart port: 6
pasr: in pasr_init-43 ...ddr: current logic version is lpddr4 verison !!!
ddr: current logic version is lpddr4 verison !!!
dtimage: -----can not find huawei,lcd_panel_type node by compatible
display: [display]get_detect_type: huawei,lcd_panel_type: get detect_type fail
display: lcd:no lcd detect_type
no_module: [LOGO] get_logo_buffer_from_dtsi: Could not find path /reserved-memory/logo-buffer.
no_module: [LOGO] logo_init: logo init failed!!! used the default fb addr.
display: [display]jdi_nt35696_panel_init: lcd type is not JDI_NT35696_5P5_LCD.
display: [display]jdi_otm2503b_panel_init: lcd type is not JDI_OTM2503B_5P5_LCD.
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010002, mntnStageCode is 31
bfm: : <<<<<exit set_boot_stage.
dtimage: -----can not find huawei,lcd_panel_type node by compatible
display: [display]get_dts_value: can not get huawei,lcd_panel_type, bl_bus_id=4!
dtimage: -----can not find ti,lm36923 node by compatible
display: [display]get_dts_value: can not get ti,lm36923, support=0!
display: get lm36923_support failed!
Audio_codec: [audio]:Could not find "hisilicon,codec-controller" node.
load_teeos: can not find fb node fingerprint
load_teeos: failed to find fb node ese_config
display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010003, mntnStageCode is 32
bfm: : <<<<<exit set_boot_stage.
preboot: GPIO_068_SEL connect GND enter fastboot mode.
watchdog: Disable watchdog start
bfm: : [disable_boot_fail_system] boot_fail_system state is 0
rescue: ^^^^^^^^^[rescue_init] ok !
usbloader: bootmode is 4
usb: [USBFINFO]USB RESET
usb: [USBFINFO]USB CONNDONE, highspeed
usb: [USBFINFO]USB RESET
usb: [USBFINFO]USB CONNDONE, highspeed
usbloader: usb: online (highspeed)
usb: [USBFINFO]usb enum done
usbloader: usb_rx_cmd_complete() 'getvar:product', size is 0x0000000e
usbloader: usb_rx_cmd_complete() 'getvar:version', size is 0x0000000e
usbloader: usb_rx_cmd_complete() 'getvar:version-bootloader', size is 0x00000019
usbloader: usb_rx_cmd_complete() 'getvar:serialno', size is 0x0000000f
usbloader: usb_rx_cmd_complete() 'getvar:secure', size is 0x0000000d
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment