Skip to content

Instantly share code, notes, and snippets.

@skarmahe2017

skarmahe2017/gist:b1b877cfb797e49d9e9ff8873e56211f

Created May 21, 2018 09:50
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save skarmahe2017/b1b877cfb797e49d9e9ff8873e56211f to your computer and use it in GitHub Desktop.
Save skarmahe2017/b1b877cfb797e49d9e9ff8873e56211f to your computer and use it in GitHub Desktop.
Download ZIP
Getting kernel panic on hikey620 board by compile the source by self build toochain Products Support HiKey 960
Raw
gistfile1.txt
U-Boot 2016.05-08320-gaeaec0e (Jun 28 2016 - 13:52:31 +0000)hikey
DRAM: 990 MiB
HI6553 PMIC init
MMC: config_sd_carddetect: SD card present
HiKey DWMMC: 0, HiKey DWMMC: 1
reading uboot.env
** Unable to read "uboot.env" from mmc1:1 **
Using default environment
In: uart@f7113000
Out: uart@f7113000
Err: uart@f7113000
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 0
=>
=>
=>
=>
=> setenv bootargs 'console=ttyAMA3,115200 earlycon=pl011,0xf7113000 root=/dev/mmcblk1p2 rw rootfstype=ext4'
=> setenv bootcmd 'fatload mmc 1:1 0x10008000 Image; fatload mmc 1:1 0x13000000 hi6220-hikey.dtb;booti 0x10008000 - 0x13000000'
=> boot
reading Image
12451840 bytes read in 2163 ms (5.5 MiB/s)
reading hi6220-hikey.dtb
45849 bytes read in 12 ms (3.6 MiB/s)
## Flattened Device Tree blob at 13000000
Booting using the fdt blob at 0x13000000
Using Device Tree in place at 0000000013000000, end 000000001300e318
Starting kernel ...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Initializing cgroup subsys schedtune
[ 0.000000] Linux version 3.18.109 (manju@OptiPlex-380) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) ) #1 SMP PREEMPT Fri May8
[ 0.000000] Boot CPU: AArch64 Processor [410fd033]
[ 0.000000] Early serial console at I/O port 0x0 (options '')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 64 MiB at 0x000000003a000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] PERCPU: Embedded 11 pages/cpu @ffffffc039f59000 s16064 r0 d28992 u45056
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 249965
[ 0.000000] Kernel command line: console=ttyAMA3,115200 earlycon=pl011,0xf7113000 root=/dev/mmcblk1p2 rw rootfstype=ext4
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 28672 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 65536 bytes
[ 0.000000] early log buf free: 14552(88%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Memory: 910632K/1013748K available (8776K kernel code, 520K rwdata, 2424K rodata, 288K init, 499K bss, 37580K reserved, 65536K cma-rese)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdffff0000 ( 247 GB)
[ 0.000000] vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000 ( 7 GB maximum)
[ 0.000000] 0xffffffbe00000000 - 0xffffffbe00d90000 ( 13 MB actual)
[ 0.000000] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
[ 0.000000] fixed : 0xffffffbffbdfb000 - 0xffffffbffbdff000 ( 16 KB)
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc03e000000 ( 992 MB)
[ 0.000000] .init : 0xffffffc000b7b000 - 0xffffffc000bc3000 ( 288 KB)
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000914320 ( 8785 KB)
[ 0.000000] .data : 0xffffffc000bde000 - 0xffffffc000c60000 ( 520 KB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:64 nr_irqs:64 16
[ 0.000000] SYSPLL: syspll PM status: 0x30007808
[ 0.000000] SYSPLL: syspll is read: l: 0x8000, u: 0x46F5
[ 0.000000] SYSPLL: syspll is read: 0x46F58000, 1190494208
[ 0.000000] SYSPLL: set syspll medpll: 1190494208
[ 0.000000] SYSPLL: modified fix_rate[8], id=9, f=1190494208
[ 0.000000] SYSPLL: modified fix_rate[9], id=10, f=1190494208
[ 0.000006] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696213963ns
[ 0.008490] Architected cp15 timer(s) running at 1.20MHz (phys).
[ 0.014952] Console: colour dummy device 80x25
[ 0.020261] allocated 4194304 bytes of page_cgroup
[ 0.025103] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.033125] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.40 BogoMIPS (lpj=12000)
[ 0.043432] pid_max: default: 32768 minimum: 301
[ 0.048200] Security Framework initialized
[ 0.052348] SELinux: Initializing.
[ 0.055977] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.062756] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.070504] Initializing cgroup subsys blkio
[ 0.074828] Initializing cgroup subsys memory
[ 0.079245] Initializing cgroup subsys devices
[ 0.083750] Initializing cgroup subsys freezer
[ 0.088248] Initializing cgroup subsys hugetlb
[ 0.093624] sched-energy: CPU device node has no sched-energy-costs
[ 0.099981] Invalid sched_group_energy for CPU0
[ 0.104559] CPU0: update cpu_capacity 1024
[ 0.108716] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[ 0.116931] EFI services will not be available.
[ 0.121516] ASID allocator initialised with 32768 entries
[ 0.307388] Detected VIPT I-cache on CPU1
[ 0.307431] Invalid sched_group_energy for CPU1
[ 0.307435] CPU1: update cpu_capacity 1024
[ 0.307439] CPU1: Booted secondary processor [410fd033]
[ 0.367365] Detected VIPT I-cache on CPU2
[ 0.367383] Invalid sched_group_energy for CPU2
[ 0.367386] CPU2: update cpu_capacity 1024
[ 0.367389] CPU2: Booted secondary processor [410fd033]
[ 0.427399] Detected VIPT I-cache on CPU3
[ 0.427417] Invalid sched_group_energy for CPU3
[ 0.427420] CPU3: update cpu_capacity 1024
[ 0.427423] CPU3: Booted secondary processor [410fd033]
[ 0.487549] Detected VIPT I-cache on CPU4
[ 0.487585] Invalid sched_group_energy for CPU4
[ 0.487588] CPU4: update cpu_capacity 1024
[ 0.487591] CPU4: Booted secondary processor [410fd033]
[ 0.547490] Detected VIPT I-cache on CPU5
[ 0.547508] Invalid sched_group_energy for CPU5
[ 0.547512] CPU5: update cpu_capacity 1024
[ 0.547515] CPU5: Booted secondary processor [410fd033]
[ 0.607531] Detected VIPT I-cache on CPU6
[ 0.607549] Invalid sched_group_energy for CPU6
[ 0.607553] CPU6: update cpu_capacity 1024
[ 0.607556] CPU6: Booted secondary processor [410fd033]
[ 0.667571] Detected VIPT I-cache on CPU7
[ 0.667590] Invalid sched_group_energy for CPU7
[ 0.667593] CPU7: update cpu_capacity 1024
[ 0.667596] CPU7: Booted secondary processor [410fd033]
[ 0.667676] Brought up 8 CPUs
[ 0.796990] SMP: Total of 8 processors activated.
[ 0.801805] alternatives: patching kernel code
[ 0.806424] Invalid sched_group_energy for CPU7
[ 0.811004] Invalid sched_group_energy for Cluster7
[ 0.815944] Invalid sched_group_energy for CPU6
[ 0.820524] Invalid sched_group_energy for Cluster6
[ 0.825453] Invalid sched_group_energy for CPU5
[ 0.830039] Invalid sched_group_energy for Cluster5
[ 0.834968] Invalid sched_group_energy for CPU4
[ 0.839547] Invalid sched_group_energy for Cluster4
[ 0.844484] Invalid sched_group_energy for CPU3
[ 0.849063] Invalid sched_group_energy for Cluster3
[ 0.853992] Invalid sched_group_energy for CPU2
[ 0.858577] Invalid sched_group_energy for Cluster2
[ 0.863507] Invalid sched_group_energy for CPU1
[ 0.868085] Invalid sched_group_energy for Cluster1
[ 0.873021] Invalid sched_group_energy for CPU0
[ 0.877600] Invalid sched_group_energy for Cluster0
[ 0.885852] DMI not present or invalid.
[ 0.891697] xor: measuring software checksum speed
[ 0.993099] 8regs : 2240.000 MB/sec
[ 1.093144] 8regs_prefetch: 2058.000 MB/sec
[ 1.193197] 32regs : 2736.400 MB/sec
[ 1.293242] 32regs_prefetch: 2384.800 MB/sec
[ 1.297916] xor: using function: 32regs (2736.400 MB/sec)
[ 1.303389] pinctrl core: initialized pinctrl subsystem
[ 1.308986] regulator-dummy: no parameters
[ 1.321945] NET: Registered protocol family 16
[ 1.326611] schedtune: init normalization constants...
[ 1.331823] schedtune: no energy model data
[ 1.381860] cpuidle: using governor ladder
[ 1.441878] cpuidle: using governor menu
[ 1.445964] vdso: 2 pages (1 code @ ffffffc000919000, 1 data @ ffffffc000be4000)
[ 1.453492] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 1.461145] software IO TLB [mem 0x37c00000-0x38000000] (4MB) mapped at [ffffffc037c00000-ffffffc037ffffff]
[ 1.471741] DMA: preallocated 256 KiB pool for atomic allocations
[ 1.477993] Serial: AMBA PL011 UART driver
[ 1.482987] f8015000.uart: ttyAMA0 at MMIO 0xf8015000 (irq = 68, base_baud = 0) is a PL011 rev2
[ 1.492120] uart-pl011 f7111000.uart: could not find pctldev for node /smb/pinmux@f7010000/uart1_pmx_func, deferring probe
[ 1.503316] amba f7111000.uart: Driver uart-pl011 requests probe deferral
[ 1.510366] uart-pl011 f7112000.uart: could not find pctldev for node /smb/pinmux@f7010000/uart2_pmx_func, deferring probe
[ 1.521556] amba f7112000.uart: Driver uart-pl011 requests probe deferral
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Initializing cgroup subsys schedtune
[ 0.000000] Linux version 3.18.109 (manju@OptiPlex-380) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) ) #1 SMP PREEMPT Fri May8
[ 0.000000] Boot CPU: AArch64 Processor [410fd033]
[ 0.000000] Early serial console at I/O port 0x0 (options '')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 64 MiB at 0x000000003a000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] PERCPU: Embedded 11 pages/cpu @ffffffc039f59000 s16064 r0 d28992 u45056
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 249965
[ 0.000000] Kernel command line: console=ttyAMA3,115200 earlycon=pl011,0xf7113000 root=/dev/mmcblk1p2 rw rootfstype=ext4
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 28672 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 65536 bytes
[ 0.000000] early log buf free: 14552(88%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Memory: 910632K/1013748K available (8776K kernel code, 520K rwdata, 2424K rodata, 288K init, 499K bss, 37580K reserved, 65536K cma-rese)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdffff0000 ( 247 GB)
[ 0.000000] vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000 ( 7 GB maximum)
[ 0.000000] 0xffffffbe00000000 - 0xffffffbe00d90000 ( 13 MB actual)
[ 0.000000] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
[ 0.000000] fixed : 0xffffffbffbdfb000 - 0xffffffbffbdff000 ( 16 KB)
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc03e000000 ( 992 MB)
[ 0.000000] .init : 0xffffffc000b7b000 - 0xffffffc000bc3000 ( 288 KB)
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000914320 ( 8785 KB)
[ 0.000000] .data : 0xffffffc000bde000 - 0xffffffc000c60000 ( 520 KB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:64 nr_irqs:64 16
[ 0.000000] SYSPLL: syspll PM status: 0x30007808
[ 0.000000] SYSPLL: syspll is read: l: 0x8000, u: 0x46F5
[ 0.000000] SYSPLL: syspll is read: 0x46F58000, 1190494208
[ 0.000000] SYSPLL: set syspll medpll: 1190494208
[ 0.000000] SYSPLL: modified fix_rate[8], id=9, f=1190494208
[ 0.000000] SYSPLL: modified fix_rate[9], id=10, f=1190494208
[ 0.000006] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696213963ns
[ 0.008490] Architected cp15 timer(s) running at 1.20MHz (phys).
[ 0.014952] Console: colour dummy device 80x25
[ 0.020261] allocated 4194304 bytes of page_cgroup
[ 0.025103] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.033125] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.40 BogoMIPS (lpj=12000)
[ 0.043432] pid_max: default: 32768 minimum: 301
[ 0.048200] Security Framework initialized
[ 0.052348] SELinux: Initializing.
[ 0.055977] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.062756] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.070504] Initializing cgroup subsys blkio
[ 0.074828] Initializing cgroup subsys memory
[ 0.079245] Initializing cgroup subsys devices
[ 0.083750] Initializing cgroup subsys freezer
[ 0.088248] Initializing cgroup subsys hugetlb
[ 0.093624] sched-energy: CPU device node has no sched-energy-costs
[ 0.099981] Invalid sched_group_energy for CPU0
[ 0.104559] CPU0: update cpu_capacity 1024
[ 0.108716] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[ 0.116931] EFI services will not be available.
[ 0.121516] ASID allocator initialised with 32768 entries
[ 0.307388] Detected VIPT I-cache on CPU1
[ 0.307431] Invalid sched_group_energy for CPU1
[ 0.307435] CPU1: update cpu_capacity 1024
[ 0.307439] CPU1: Booted secondary processor [410fd033]
[ 0.367365] Detected VIPT I-cache on CPU2
[ 0.367383] Invalid sched_group_energy for CPU2
[ 0.367386] CPU2: update cpu_capacity 1024
[ 0.367389] CPU2: Booted secondary processor [410fd033]
[ 0.427399] Detected VIPT I-cache on CPU3
[ 0.427417] Invalid sched_group_energy for CPU3
[ 0.427420] CPU3: update cpu_capacity 1024
[ 0.427423] CPU3: Booted secondary processor [410fd033]
[ 0.487549] Detected VIPT I-cache on CPU4
[ 0.487585] Invalid sched_group_energy for CPU4
[ 0.487588] CPU4: update cpu_capacity 1024
[ 0.487591] CPU4: Booted secondary processor [410fd033]
[ 0.547490] Detected VIPT I-cache on CPU5
[ 0.547508] Invalid sched_group_energy for CPU5
[ 0.547512] CPU5: update cpu_capacity 1024
[ 0.547515] CPU5: Booted secondary processor [410fd033]
[ 0.607531] Detected VIPT I-cache on CPU6
[ 0.607549] Invalid sched_group_energy for CPU6
[ 0.607553] CPU6: update cpu_capacity 1024
[ 0.607556] CPU6: Booted secondary processor [410fd033]
[ 0.667571] Detected VIPT I-cache on CPU7
[ 0.667590] Invalid sched_group_energy for CPU7
[ 0.667593] CPU7: update cpu_capacity 1024
[ 0.667596] CPU7: Booted secondary processor [410fd033]
[ 0.667676] Brought up 8 CPUs
[ 0.796990] SMP: Total of 8 processors activated.
[ 0.801805] alternatives: patching kernel code
[ 0.806424] Invalid sched_group_energy for CPU7
[ 0.811004] Invalid sched_group_energy for Cluster7
[ 0.815944] Invalid sched_group_energy for CPU6
[ 0.820524] Invalid sched_group_energy for Cluster6
[ 0.825453] Invalid sched_group_energy for CPU5
[ 0.830039] Invalid sched_group_energy for Cluster5
[ 0.834968] Invalid sched_group_energy for CPU4
[ 0.839547] Invalid sched_group_energy for Cluster4
[ 0.844484] Invalid sched_group_energy for CPU3
[ 0.849063] Invalid sched_group_energy for Cluster3
[ 0.853992] Invalid sched_group_energy for CPU2
[ 0.858577] Invalid sched_group_energy for Cluster2
[ 0.863507] Invalid sched_group_energy for CPU1
[ 0.868085] Invalid sched_group_energy for Cluster1
[ 0.873021] Invalid sched_group_energy for CPU0
[ 0.877600] Invalid sched_group_energy for Cluster0
[ 0.885852] DMI not present or invalid.
[ 0.891697] xor: measuring software checksum speed
[ 0.993099] 8regs : 2240.000 MB/sec
[ 1.093144] 8regs_prefetch: 2058.000 MB/sec
[ 1.193197] 32regs : 2736.400 MB/sec
[ 1.293242] 32regs_prefetch: 2384.800 MB/sec
[ 1.297916] xor: using function: 32regs (2736.400 MB/sec)
[ 1.303389] pinctrl core: initialized pinctrl subsystem
[ 1.308986] regulator-dummy: no parameters
[ 1.321945] NET: Registered protocol family 16
[ 1.326611] schedtune: init normalization constants...
[ 1.331823] schedtune: no energy model data
[ 1.381860] cpuidle: using governor ladder
[ 1.441878] cpuidle: using governor menu
[ 1.445964] vdso: 2 pages (1 code @ ffffffc000919000, 1 data @ ffffffc000be4000)
[ 1.453492] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 1.461145] software IO TLB [mem 0x37c00000-0x38000000] (4MB) mapped at [ffffffc037c00000-ffffffc037ffffff]
[ 1.471741] DMA: preallocated 256 KiB pool for atomic allocations
[ 1.477993] Serial: AMBA PL011 UART driver
[ 1.482987] f8015000.uart: ttyAMA0 at MMIO 0xf8015000 (irq = 68, base_baud = 0) is a PL011 rev2
[ 1.492120] uart-pl011 f7111000.uart: could not find pctldev for node /smb/pinmux@f7010000/uart1_pmx_func, deferring probe
[ 1.503316] amba f7111000.uart: Driver uart-pl011 requests probe deferral
[ 1.510366] uart-pl011 f7112000.uart: could not find pctldev for node /smb/pinmux@f7010000/uart2_pmx_func, deferring probe
[ 1.521556] amba f7112000.uart: Driver uart-pl011 requests probe deferral
[ 1.528599] uart-pl011 f7113000.uart: could not find pctldev for node /smb/pinmux@f7010000/uart3_pmx_func, deferring probe
[ 1.528707] amba f7113000.uart: Driver uart-pl011 requests probe deferral
[ 1.528949] uart-pl011 f7114000.uart: could not find pctldev for node /smb/pinmux@f7010000/uart4_pmx_func, deferring probe
[ 1.529058] amba f7114000.uart: Driver uart-pl011 requests probe deferral
[ 1.529600] hi6220-mbox f7510000.mailbox: Mailbox enabled
[ 1.535945] /watchdog@f8005000: could not get #clock-cells for /ao_ctrl
[ 1.536016] ERROR: could not get clock /watchdog@f8005000:apb_pclk(0)
[ 1.536085] of_amba_device_create(): amba_device_add() failed (-2) for /watchdog@f8005000
[ 1.753551] raid6: int64x1 431 MB/s
[ 1.923628] raid6: int64x2 691 MB/s
[ 2.093749] raid6: int64x4 1064 MB/s
[ 2.263791] raid6: int64x8 1118 MB/s
[ 2.433881] raid6: neonx1 749 MB/s
[ 2.603946] raid6: neonx2 1194 MB/s
[ 2.774024] raid6: neonx4 1560 MB/s
[ 2.944085] raid6: neonx8 1564 MB/s
[ 2.944125] raid6: using algorithm neonx8 (1564 MB/s)
[ 2.944175] raid6: using intx1 recovery algorithm
[ 2.944472] platform regulator@0: Driver reg-fixed-voltage requests probe deferral
[ 2.944607] platform fixedregulator@1: Driver reg-fixed-voltage requests probe deferral
[ 2.944839] vgaarb: loaded
[ 2.945147] SCSI subsystem initialized
[ 2.945659] usbcore: registered new interface driver usbfs
[ 2.945751] usbcore: registered new interface driver hub
[ 2.945920] usbcore: registered new device driver usb
[ 2.946170] i2c_designware f7102000.i2c: could not find pctldev for node /smb/pinmux@f7010000/i2c2_pmx_func, deferring probe
[ 2.946287] platform f7102000.i2c: Driver i2c_designware requests probe deferral
[ 2.946464] Linux video capture interface: v2.00
[ 2.947070] Advanced Linux Sound Architecture Driver Initialized.
[ 2.947604] Bluetooth: Core ver 2.19
[ 2.947663] NET: Registered protocol family 31
[ 2.947708] Bluetooth: HCI device and connection manager initialized
[ 2.947777] Bluetooth: HCI socket layer initialized
[ 2.947830] Bluetooth: L2CAP socket layer initialized
[ 2.947883] Bluetooth: SCO socket layer initialized
[ 2.948109] ------------[ cut here ]------------
[ 2.948161] WARNING: CPU: 3 PID: 1 at net/wireless/reg.c:511 regulatory_init+0x84/0x120()
[ 2.948239] db.txt is empty, you should update it...
[ 2.948292] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 3.18.109 #1
[ 2.948353] Hardware name: HiKey Development Board (DT)
[ 2.948405] Call trace:
[ 2.948439] [<ffffffc00008a320>] dump_backtrace+0x0/0x110
[ 2.948494] [<ffffffc00008a444>] show_stack+0x14/0x20
[ 2.948549] [<ffffffc00090566c>] dump_stack+0x88/0xac
[ 2.948602] [<ffffffc0000b16e4>] warn_slowpath_common+0x84/0xb0
[ 2.948660] [<ffffffc0000b1780>] warn_slowpath_fmt+0x40/0x48
[ 2.948718] [<ffffffc000bacb70>] regulatory_init+0x84/0x120
[ 2.948774] [<ffffffc000baca7c>] cfg80211_init+0x54/0xc4
[ 2.948832] [<ffffffc000b7ba30>] do_one_initcall+0xa0/0x134
[ 2.948889] [<ffffffc000b7bc5c>] kernel_init_freeable+0x198/0x238
[ 2.948950] [<ffffffc000902018>] kernel_init+0x18/0xe0
[ 2.949014] ---[ end trace ecc2922e8cd9bacc ]---
[ 2.949098] cfg80211: Calling CRDA to update world regulatory domain
[ 2.949281] NetLabel: Initializing
[ 2.949318] NetLabel: domain hash size = 128
[ 2.949361] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.949446] NetLabel: unlabeled traffic allowed by default
[ 2.949796] Switched to clocksource arch_sys_counter
[ 2.950291] G3D_PD_VDD: no parameters
[ 2.950396] SOC_MED: no parameters
[ 2.954863] NET: Registered protocol family 2
[ 2.955482] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 2.955612] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 2.955788] TCP: Hash tables configured (established 8192 bind 8192)
[ 2.955907] TCP: reno registered
[ 2.955946] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 2.956026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 2.956302] NET: Registered protocol family 1
[ 2.956574] Trying to unpack rootfs image as initramfs...
[ 2.956793] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
[ 2.972529] Freeing initrd memory: 8192K
[ 2.973365] kvm [1]: interrupt-controller@f6804000 IRQ25
[ 2.973709] kvm [1]: timer IRQ27
[ 2.973756] kvm [1]: Hyp mode initialized successfully
[ 2.976832] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 2.977048] audit: initializing netlink subsys (disabled)
[ 2.977159] audit: type=2000 audit(2.869:1): initialized
[ 2.977747] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.978328] VFS: Disk quotas dquot_6.5.2
[ 2.978417] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.978938] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.979117] Registering sdcardfs 0.1
[ 2.979357] fuse init (API version 7.23)
[ 2.979705] 9p: Installing v9fs 9p2000 file system support
[ 2.979950] msgmni has been set to 1922
[ 2.981743] io scheduler noop registered
[ 2.981805] io scheduler cfq registered (default)
[ 2.982795] pinctrl-single f7010000.pinmux: 159 pins at pa ffffff80000bc000 size 636
[ 2.983220] pinctrl-single f7010800.pinmux: 163 pins at pa ffffff80000be800 size 652
[ 2.983419] pinctrl-single f8001800.pinmux: 30 pins at pa ffffff80000c0800 size 120
[ 2.984065] pl061_gpio f8011000.gpio: PL061 GPIO chip @0x00000000f8011000 registered
[ 2.984338] pl061_gpio f8012000.gpio: PL061 GPIO chip @0x00000000f8012000 registered
[ 2.984606] pl061_gpio f8013000.gpio: PL061 GPIO chip @0x00000000f8013000 registered
[ 2.984868] pl061_gpio f8014000.gpio: PL061 GPIO chip @0x00000000f8014000 registered
[ 2.985124] pl061_gpio f7020000.gpio: PL061 GPIO chip @0x00000000f7020000 registered
[ 2.985384] pl061_gpio f7021000.gpio: PL061 GPIO chip @0x00000000f7021000 registered
[ 2.985640] pl061_gpio f7022000.gpio: PL061 GPIO chip @0x00000000f7022000 registered
[ 2.985902] pl061_gpio f7023000.gpio: PL061 GPIO chip @0x00000000f7023000 registered
[ 2.986157] pl061_gpio f7024000.gpio: PL061 GPIO chip @0x00000000f7024000 registered
[ 2.986417] pl061_gpio f7025000.gpio: PL061 GPIO chip @0x00000000f7025000 registered
[ 2.986671] pl061_gpio f7026000.gpio: PL061 GPIO chip @0x00000000f7026000 registered
[ 2.986934] pl061_gpio f7027000.gpio: PL061 GPIO chip @0x00000000f7027000 registered
[ 2.987192] pl061_gpio f7028000.gpio: PL061 GPIO chip @0x00000000f7028000 registered
[ 2.987454] pl061_gpio f7029000.gpio: PL061 GPIO chip @0x00000000f7029000 registered
[ 2.987708] pl061_gpio f702a000.gpio: PL061 GPIO chip @0x00000000f702a000 registered
[ 2.987974] pl061_gpio f702b000.gpio: PL061 GPIO chip @0x00000000f702b000 registered
[ 2.988236] pl061_gpio f702c000.gpio: PL061 GPIO chip @0x00000000f702c000 registered
[ 2.988494] pl061_gpio f702d000.gpio: PL061 GPIO chip @0x00000000f702d000 registered
[ 2.988752] pl061_gpio f702e000.gpio: PL061 GPIO chip @0x00000000f702e000 registered
[ 2.989017] pl061_gpio f702f000.gpio: PL061 GPIO chip @0x00000000f702f000 registered
[ 2.993012] k3-dma f7370000.dma: initialized
[ 2.996513] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.998110] [drm] Initialized drm 1.1.0 20060810
[ 2.999059] [drm] Initialized hisi 1.0.0 20141224 on minor 0
[ 2.999668] [drm] failed to find slave encoder i2c client
[ 2.999743] platform f4107800.dsi: Driver hisi-dsi requests probe deferral
[ 3.001281] Mali: Mali device driver loaded
[ 3.004712] brd: module loaded
[ 3.006400] loop: module loaded
[ 3.006758] (stk) :sysfs entries created
[ 3.006855] (hci_tty): inside hci_tty_init
[ 3.006989] (hci_tty): allocated 251, 0
[ 3.007034] (hci_tty): hdev ffffffc037953000
[ 3.007396] (hci_tty): HCI device registered (hdev ffffffc037953000)
[ 3.007534] (hci_tty): called dumb_hci_callback
[ 3.008807] ldo2: Operation of current configuration missing
[ 3.008875] ldo2: 2500 <--> 3200 mV at 2500 mV 2500 <--> 3200 mA normal
[ 3.009141] ldo7: Operation of current configuration missing
[ 3.009203] ldo7: 1800 <--> 3300 mV at 2850 mV 1800 <--> 3300 mA normal standby
[ 3.009463] ldo10: Operation of current configuration missing
[ 3.009525] ldo10: 1800 <--> 3000 mV at 2850 mV 1800 <--> 3000 mA normal standby
[ 3.009873] ldo13: Operation of current configuration missing
[ 3.009932] (hci_tty): called dumb_hci_send_callback
[ 3.009989] ldo13: 1600 <--> 1950 mV at 1800 mV 1600 <--> 1950 mA normal standby
[ 3.010323] ldo14: Operation of current configuration missing
[ 3.010385] ldo14: 2500 <--> 3200 mV at 2800 mV 2500 <--> 3200 mA normal
[ 3.010645] ldo15: Operation of current configuration missing
[ 3.010827] ldo15: 1600 <--> 1950 mV at 1800 mV 1600 <--> 1950 mA normal standby
[ 3.011098] ldo17: Operation of current configuration missing
[ 3.011159] ldo17: 2500 <--> 3200 mV at 2500 mV 2500 <--> 3200 mA normal
[ 3.011417] ldo19: Operation of current configuration missing
[ 3.011479] ldo19: 1800 <--> 3000 mV at 3000 mV 1800 <--> 3000 mA normal standby
[ 3.011681] hi655x_regulator f8000000.pmic:regulator@a40: fake_of_get_regulator_init_data no consumer_supplies
[ 3.011851] ldo21: Operation of current configuration missing
[ 3.012032] ldo21: 1650 <--> 2000 mV at 1800 mV 1650 <--> 2000 mA normal
[ 3.012288] ldo22: Operation of current configuration missing
[ 3.012470] ldo22: 900 <--> 1200 mV at 1200 mV 900 <--> 1200 mA normal
[ 3.013281] tun: Universal TUN/TAP device driver, 1.6
[ 3.013332] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.013751] PPP generic driver version 2.4.2
[ 3.013883] PPP BSD Compression module registered
[ 3.013935] PPP Deflate Compression module registered
[ 3.014006] PPP MPPE Compression module registered
[ 3.014060] NET: Registered protocol family 24
[ 3.014210] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 3.014318] usbcore: registered new interface driver pegasus
[ 3.014409] usbcore: registered new interface driver rtl8150
[ 3.014500] usbcore: registered new interface driver r8152
[ 3.014594] usbcore: registered new interface driver asix
[ 3.014690] usbcore: registered new interface driver ax88179_178a
[ 3.014783] usbcore: registered new interface driver cdc_ether
[ 3.014877] usbcore: registered new interface driver dm9601
[ 3.014966] usbcore: registered new interface driver CoreChips
[ 3.015059] usbcore: registered new interface driver smsc75xx
[ 3.015154] usbcore: registered new interface driver smsc95xx
[ 3.015246] usbcore: registered new interface driver net1080
[ 3.015337] usbcore: registered new interface driver plusb
[ 3.015426] usbcore: registered new interface driver cdc_subset
[ 3.015519] usbcore: registered new interface driver zaurus
[ 3.015610] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 3.015732] usbcore: registered new interface driver cdc_ncm
[ 3.016288] f72c0000.usb supply vusb_d not found, using dummy regulator
[ 3.016364] f72c0000.usb supply vusb_a not found, using dummy regulator
[ 3.049837] dwc2 f72c0000.usb: EPs: 16, dedicated fifos, 1920 entries in SPRAM
[ 3.050041] dwc2 f72c0000.usb: cannot create debug root
[ 3.910530] dwc2 f72c0000.usb: DWC OTG Controller
[ 3.910601] dwc2 f72c0000.usb: new USB bus registered, assigned bus number 1
[ 3.910691] dwc2 f72c0000.usb: irq 109, io mem 0x00000000
[ 3.911253] hub 1-0:1.0: USB hub found
[ 3.911316] hub 1-0:1.0: 1 port detected
[ 3.911620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.911687] ehci-pci: EHCI PCI platform driver
[ 3.911778] ehci-platform: EHCI generic platform driver
[ 3.911984] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.912048] ohci-pci: OHCI PCI platform driver
[ 3.912127] ohci-platform: OHCI generic platform driver
[ 3.912514] usbcore: registered new interface driver cdc_acm
[ 3.912571] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3.912695] usbcore: registered new interface driver usb-storage
[ 3.912853] usbcore: registered new interface driver usbserial
[ 3.912940] usbcore: registered new interface driver usbserial_generic
[ 3.913032] usbserial: USB Serial support registered for generic
[ 3.913125] usbcore: registered new interface driver ftdi_sio
[ 3.913213] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 3.913342] usbcore: registered new interface driver option
[ 3.913425] usbserial: USB Serial support registered for GSM modem (1-port)
[ 3.913561] usbcore: registered new interface driver pl2303
[ 3.913643] usbserial: USB Serial support registered for pl2303
[ 3.913735] usbcore: registered new interface driver qcserial
[ 3.913819] usbserial: USB Serial support registered for Qualcomm USB modem
[ 3.913929] usbcore: registered new interface driver usb_serial_simple
[ 3.914021] usbserial: USB Serial support registered for carelink
[ 3.914107] usbserial: USB Serial support registered for zio
[ 3.914191] usbserial: USB Serial support registered for funsoft
[ 3.914277] usbserial: USB Serial support registered for flashloader
[ 3.914366] usbserial: USB Serial support registered for vivopay
[ 3.914453] usbserial: USB Serial support registered for moto_modem
[ 3.914546] usbserial: USB Serial support registered for motorola_tetra
[ 3.914639] usbserial: USB Serial support registered for novatel_gps
[ 3.914728] usbserial: USB Serial support registered for hp4x
[ 3.914812] usbserial: USB Serial support registered for suunto
[ 3.914898] usbserial: USB Serial support registered for siemens_mpi
[ 3.915238] mousedev: PS/2 mouse device common for all mice
[ 3.916076] rtc-pl031 f8003000.rtc: rtc core: registered pl031 as rtc0
[ 3.916346] i2c /dev entries driver
[ 3.937577] hisi_thermal f7030700.tsensor: THERMAL ALARM: T > 50
[ 3.942885] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
[ 3.943068] Bluetooth: HCI UART driver ver 2.2
[ 3.943116] Bluetooth: HCI H4 protocol initialized
[ 3.943624] (stc): chnl_id list empty :4
[ 3.943669] (stk) : st_kim_start[ 3.962202] sdhci: Secure Digital Host Controller Interface driver
[ 3.962347] sdhci: Copyright(c) Pierre Ossman
[ 3.962656] Synopsys Designware Multimedia Card Interface Driver
[ 3.964812] dwmmc_k3 f723d000.dwmmc0: fifo-depth property not found, using value of FIFOTH register as default
[ 3.965829] dwmmc_k3 f723d000.dwmmc0: Using internal DMA controller.
[ 3.965993] dwmmc_k3 f723d000.dwmmc0: Version ID is 250a
[ 3.966191] dwmmc_k3 f723d000.dwmmc0: DW MMC controller at irq 104, 32 bit host data width, 8 deep fifo
[ 3.966703] dwmmc_k3 f723d000.dwmmc0: No vqmmc regulator found
[ 3.979837] mmc_host mmc0: Bus speed (slot 0) = 24801962Hz (slot req 400000Hz, actual 387530HZ div = 32)
[ 4.000398] dwmmc_k3 f723d000.dwmmc0: 1 slots initialized
[ 4.000809] dwmmc_k3 f723e000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
[ 4.001066] dwmmc_k3 f723e000.dwmmc1: Using internal DMA controller.
[ 4.001134] dwmmc_k3 f723e000.dwmmc1: Version ID is 250a
[ 4.001209] dwmmc_k3 f723e000.dwmmc1: DW MMC controller at irq 105, 32 bit host data width, 64 deep fifo
[ 4.001389] dwmmc_k3 f723e000.dwmmc1: Got CD GPIO
[ 4.020406] mmc_host mmc1: Bus speed (slot 0) = 24801962Hz (slot req 400000Hz, actual 387530HZ div = 32)
[ 4.041283] dwmmc_k3 f723e000.dwmmc1: 1 slots initialized
[ 4.041721] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
[ 4.042111] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
[ 4.042181] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
[ 4.042247] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 106, 32 bit host data width, 128 deep fifo
[ 4.042485] platform f723f000.dwmmc2: Driver dwmmc_k3 requests probe deferral
[ 4.042697] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.043583] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.044068] usbcore: registered new interface driver usbhid
[ 4.044126] usbhid: USB HID core driver
[ 4.048706] (stk) :ldisc_install = 1
[ 4.056116] ashmem: initialized
[ 4.056251] nanohub: loaded; ret=0
[ 4.056480] u32 classifier
[ 4.056525] Actions configured
[ 4.056596] Netfilter messages via NETLINK v0.30.
[ 4.056768] nf_conntrack version 0.5.0 (7690 buckets, 30760 max)
[ 4.057661] ctnetlink v0.93: registering with nfnetlink.
[ 4.058890] xt_time: kernel timezone is -0000
[ 4.062271] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.062756] arp_tables: (C) 2002 David S. Miller
[ 4.064717] TCP: cubic registered
[ 4.064804] Initializing XFRM netlink socket
[ 4.067586] NET: Registered protocol family 10
[ 4.068952] mmc0: BKOPS_EN bit is not set
[ 4.070360] mip6: Mobile IPv6
[ 4.070419] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.071543] mmc_host mmc0: Bus speed (slot 0) = 51760617Hz (slot req 52000000Hz, actual 51760617HZ div = 0)
[ 4.074655] NET: Registered protocol family 17
[ 4.074721] NET: Registered protocol family 15
[ 4.074800] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 4.076993] Bridge firewalling registered
[ 4.077165] Bluetooth: RFCOMM TTY layer initialized
[ 4.077225] Bluetooth: RFCOMM socket layer initialized
[ 4.077277] Bluetooth: RFCOMM ver 1.11
[ 4.077321] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.077385] Bluetooth: HIDP socket layer initialized
[ 4.077439] 8021q: 802.1Q VLAN Support v1.8
[ 4.077749] 9pnet: Installing 9P2000 support
[ 4.077769] mmc0: new high speed MMC card at address 0001
[ 4.078142] mmcblk0: mmc0:0001 H8G1e 7.28 GiB
[ 4.078259] Registered cp15_barrier emulation handler
[ 4.078350] mmcblk0boot0: mmc0:0001 H8G1e partition 1 4.00 MiB
[ 4.078522] mmcblk0boot1: mmc0:0001 H8G1e partition 2 4.00 MiB
[ 4.078599] Registered setend emulation handler
[ 4.078928] bootconsole [uart0] disabled
[ 4.079035] registered taskstats version 1
[ 4.082440] Btrfs loaded
[ 4.083940] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 4.084474] Key type encrypted registered
[ 4.085311] f7111000.uart: ttyAMA1 at MMIO 0xf7111000 (irq = 69, base_baud = 0) is a PL011 rev2
[ 4.085628] f7112000.uart: ttyAMA2 at MMIO 0xf7112000 (irq = 70, base_baud = 0) is a PL011 rev2
[ 4.085864] uart-pl011 f7113000.uart: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.
[ 4.085889] f7113000.uart: ttyAMA3 at MMIO 0xf7113000 (irq = 71, base_baud = 0) is a PL011 rev2
[ 4.186497] mmc_host mmc1: Bus speed (slot 0) = 49603925Hz (slot req 50000000Hz, actual 49603925HZ div = 0)
[ 4.186589] mmc1: new high speed SDHC card at address aaaa
[ 4.187416] mmcblk1: mmc1:aaaa SL16G 14.8 GiB
[ 4.189557] mmcblk1: p1 p2
[ 4.309957] usb 1-1: new full-speed USB device number 2 using dwc2
[ 4.511015] usb 1-1: not running at top speed; connect to a high speed hub
[ 4.512818] hub 1-1:1.0: USB hub found
[ 4.513199] hub 1-1:1.0: 3 ports detected
[ 5.040091] (stk) :ldisc installation timeout
[ 6.040020] (stk) :ldisc_install = 0
[ 6.147027] (stk) : timed out waiting for ldisc to be un-installed
[ 6.609499] (stk) :ldisc_install = 1
[ 6.609500] console [ttyAMA3] enabled
[ 6.617110] uart-pl011 f7114000.uart: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.
[ 6.630110] f7114000.uart: ttyAMA4 at MMIO 0xf7114000 (irq = 72, base_baud = 0) is a PL011 rev2
[ 6.639081] fixed_5v_hub: 5000 mV
[ 6.642615] wlan-en-regulator: 1800 mV
[ 7.140425] (stk) :ldisc installation timeout
[ 7.144655] (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed
[ 8.252340] (stk) :ldisc_install = 1[ 8.651887] hisi-drm smb:display-subsystem: fb0: frame buffer device
[ 8.658377] hisi-drm smb:display-subsystem: registered panic notifier
[ 8.692025] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
[ 8.702729] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
[ 8.709136] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
[ 8.714652] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 106, 32 bit host data width, 64 deep fifo
[ 8.724342] dwmmc_k3 f723f000.dwmmc2: No vqmmc regulator found
[ 8.830339] mmc_host mmc2: Bus speed (slot 0) = 24801962Hz (slot req 400000Hz, actual 387530HZ div = 32)
[ 8.860284] dwmmc_k3 f723f000.dwmmc2: 1 slots initialized
[ 8.867168] rtc-pl031 f8003000.rtc: setting system clock to 1970-01-01 00:00:39 UTC (39)
[ 8.868923] dwmmc_k3 f723f000.dwmmc2: card claims to support voltages below defined range
[ 8.883846] SOC_MED: disabling
[ 8.886544] mmc_host mmc2: Bus speed (slot 0) = 24801962Hz (slot req 25000000Hz, actual 24801962HZ div = 0)
[ 8.894107] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[ 8.899357] mmc2: new SDIO card at address 0001
[ 8.901643] wl18xx_driver wl18xx.0.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2
[ 8.901654] wl18xx_driver wl18xx.0.auto: Falling back to user helper
[ 8.924203] ALSA device list:
[ 8.927174] No soundcards found.
[ 8.932745] of_dma_request_slave_channel: dma-names property of node '/smb/uart@f7113000' missing or empty
[ 8.942452] uart-pl011 f7113000.uart: no DMA platform data
[ 8.948288] RAMDISK: Couldn't find valid RAM disk image starting at 0.
[ 9.250332] (stk) :ldisc installation timeout
[ 9.254561] (stk) :ldisc_install = 0[ 9.616569] random: nonblocking pool is initialized
[ 10.250330] (stk) : timed out waiting for ldisc to be un-installed
[ 10.280415] EXT4-fs (mmcblk1p2): recovery complete
[ 10.294805] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.302968] VFS: Mounted root (ext4 filesystem) on device 179:194.
[ 10.309349] Freeing unused kernel memory: 288K
[ 10.313823] Freeing alternatives memory: 76K
[ 10.318086] This architecture does not have kernel memory protection.
[ 10.363377] (stk) :ldisc_install = 1[!!!!!!] Failed to early mount API filesystems, freezing.
[ 11.360353] (stk) :ldisc installation timeout(stk) :ldisc_install = 0
[ 12.360740] (stk) : timed out waiting for ldisc to be un-installed(stk) :ldisc_install = 1
[ 13.000322] (hci_tty): called dumb_hci_callback
[ 13.470468] (stk) :ldisc installation timeout
[ 13.474697] (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed
[ 14.581977] (stk) :ldisc_install = 1(stk) :ldisc installation timeout
[ 15.582941] (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed
[ 16.691710] (stk) :ldisc_install = 1(stk) :ldisc installation timeout
[ 17.692973] (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed
[ 18.802287] (stk) :ldisc_install = 1(stk) :ldisc installation timeout
[ 19.803206] (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed
[ 20.912061] (stk) :ldisc_install = 1(stk) :ldisc installation timeout
[ 21.913062] (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed
[ 23.021977] (stk) :ldisc_install = 1(stk) :ldisc installation timeout
[ 24.023238] (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed
[ 25.132946] (stk) :ldisc_install = 1(stk) :ldisc installation timeout
[ 26.132971] (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed
[ 27.137249] Bluetooth: st_register failed -22
[ 69.051937] wl18xx_driver wl18xx.0.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
[ 69.062801] wl18xx_driver wl18xx.0.auto: Falling back to user helper
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment