slimcdk
/ 1637846373.toit-sim-4786.hardware_id-a966ebf8-6407-4964-9685-95ac15170168.firmware-v1.4.2.log
Created
November 25, 2021 13:22
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.4.2 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=nbiot.tdc.dk --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.4.2 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/825494838/otadata655889181 0x10000 /tmp/825494838/ota_0295004632" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting.... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1637846581.toit-sim-4786.hardware_id-a966ebf8-6407-4964-9685-95ac15170168.firmware-v1.4.2.log
Created
November 25, 2021 13:24
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.4.2 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=nbiot.tdc.dk --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.4.2 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/830338688/otadata877195231 0x10000 /tmp/830338688/ota_0453304242" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting.... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1637846799.maturix-sim-9690.hardware_id-a966ebf8-6407-4964-9685-95ac15170168.firmware-v1.4.2.log
Created
November 25, 2021 13:28
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.4.2 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.4.2 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/106746245/otadata218861856 0x10000 /tmp/106746245/ota_0458249215" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting....... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1637847063.maturix-sim-9690.hardware_id-a966ebf8-6407-4964-9685-95ac15170168.firmware-v1.5.0-rc.1.log
Created
November 25, 2021 13:33
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.5.0-rc.1 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.5.0-rc.1 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/797797621/otadata959218128 0x10000 /tmp/797797621/ota_0569561839" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting.... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1637847211.maturix-sim-9690.hardware_id-a966ebf8-6407-4964-9685-95ac15170168.firmware-v1.5.0-rc.1.log
Created
November 25, 2021 13:35
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.5.0-rc.1 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.5.0-rc.1 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/430571154/otadata400800457 0x10000 /tmp/430571154/ota_0203571092" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting........_ | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1638174892.toit-sim-4786.hardware_id-4c2a0869-49c3-4fe7-834e-ce3a6a9e2b7c.firmware-v1.6.0-pre.25+c8ae5eaa0.log
Created
November 29, 2021 08:44
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.6.0-pre.25+c8ae5eaa0 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=nbiot.tdc.dk --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.6.0-pre.25+c8ae5eaa0 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/495503953/otadata650552700 0x10000 /tmp/495503953/ota_0415836843" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting.... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1638175491.toit-sim-4786.hardware_id-4c2a0869-49c3-4fe7-834e-ce3a6a9e2b7c.firmware-v1.6.0-pre.25+c8ae5eaa0.log
Created
November 29, 2021 08:51
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.6.0-pre.25+c8ae5eaa0 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=nbiot.tdc.dk --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.6.0-pre.25+c8ae5eaa0 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/773656812/otadata024137563 0x10000 /tmp/773656812/ota_0006403326" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting.... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1638176616.toit-sim-4786.hardware_id-4c2a0869-49c3-4fe7-834e-ce3a6a9e2b7c.firmware-v1.5.0-rc.1.log
Created
November 29, 2021 09:09
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.5.0-rc.1 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=nbiot.tdc.dk --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.5.0-rc.1 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/408418728/otadata888615655 0x10000 /tmp/408418728/ota_0883344666" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting.... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1638176968.toit-sim-4786.hardware_id-4c2a0869-49c3-4fe7-834e-ce3a6a9e2b7c.firmware-v1.4.2.log
Last active
November 29, 2021 09:15
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.4.2 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=nbiot.tdc.dk --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.4.2 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/215876915/otadata226492662 0x10000 /tmp/215876915/ota_0907312093" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting..... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1638183855.toit-sim-4786.hardware_id-4c2a0869-49c3-4fe7-834e-ce3a6a9e2b7c.firmware-v1.6.0-pre.25+c8ae5eaa0.log
Created
November 29, 2021 13:39
This file has been truncated, but you can view the full file.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.6.0-pre.25+c8ae5eaa0 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=nbiot.tdc.dk --port=/dev/ttyUSB0 --debug | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.6.0-pre.25+c8ae5eaa0 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/969402735/otadata658076674 0x10000 /tmp/969402735/ota_0299523449" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting..... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |