slimcdk
/ gist:2a1b92f3af4a811078f857e64834400b
Created Nov 24, 2021
View gist:2a1b92f3af4a811078f857e64834400b
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ets Jun 8 2016 00:22:57 | |
| rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) | |
| configsip: 0, SPIWP:0xee | |
| clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 | |
| mode:DIO, clock div:2 | |
| load:0x3fff0030,len:188 | |
| ho 0 tail 12 room 4 | |
| load:0x40078000,len:12180 | |
| load:0x40080400,len:2944 |
View 1637844280.toit-sim-4786.hardware_id-e1ddb74a-18cb-4b55-8fdf-f214061b6327.firmware-v1.5.0-rc.1.log
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.5.0-rc.1 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.5.0-rc.1 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/151402654/otadata555026789 0x10000 /tmp/151402654/ota_0924560256" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting....... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
View 1637844347.toit-sim-4786.hardware_id-e1ddb74a-18cb-4b55-8fdf-f214061b6327.firmware-v1.5.0-rc.1.log
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.5.0-rc.1 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.5.0-rc.1 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/208506711/otadata059244234 0x10000 /tmp/208506711/ota_0821454753" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting.... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
View 1637844789.toit-sim-4786.hardware_id-e1ddb74a-18cb-4b55-8fdf-f214061b6327.firmware-v1.4.2.log
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.4.2 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.4.2 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/125603642/otadata041104721 0x10000 /tmp/125603642/ota_0768669308" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting.... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
View 1637844957.toit-sim-4786.hardware_id-e1ddb74a-18cb-4b55-8fdf-f214061b6327.firmware-v1.4.2.log
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.4.2 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.4.2 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/832545673/otadata801397588 0x10000 /tmp/832545673/ota_0506376355" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting.... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
View 1637845248.toit-sim-4786.hardware_id-e1ddb74a-18cb-4b55-8fdf-f214061b6327.firmware-v1.5.0-rc.1.log
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.5.0-rc.1 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.5.0-rc.1 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/637697839/otadata870898882 0x10000 /tmp/637697839/ota_0743187257" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting..... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
View 1637845392.toit-sim-4786.hardware_id-e1ddb74a-18cb-4b55-8fdf-f214061b6327.firmware-v1.5.0-rc.1.log
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.5.0-rc.1 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.5.0-rc.1 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/652478058/otadata968224449 0x10000 /tmp/652478058/ota_0545660716" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting.... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
View 1637845585.toit-sim-4786.hardware_id-e1ddb74a-18cb-4b55-8fdf-f214061b6327.firmware-v1.4.2.log
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.4.2 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.4.2 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/460670395/otadata711917534 0x10000 /tmp/460670395/ota_0595382693" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting...... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
View 1637846000.toit-sim-4786.hardware_id-a966ebf8-6407-4964-9685-95ac15170168.firmware-v1.5.0-rc.1.log
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.5.0-rc.1 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.5.0-rc.1 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/776750000/otadata047105359 0x10000 /tmp/776750000/ota_0138637922" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting.... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
View 1637846096.toit-sim-4786.hardware_id-a966ebf8-6407-4964-9685-95ac15170168.firmware-v1.5.0-rc.1.log
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.5.0-rc.1 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=nbiot.tdc.dk --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.5.0-rc.1 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/325127044/otadata716654355 0x10000 /tmp/325127044/ota_0800936790" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting..... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
OlderNewer