fel boot serial console log

gistfile1.txt

U-Boot 2015.04-rc1-00877-ga7ce8e8 (Feb 27 2015 - 17:56:08) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
I2C:   ready
DRAM:  2 GiB
MMC:   SUNXI SD/MMC: 0
Card did not respond to voltage select!
MMC init failed
Using default environment

HDMI connected: Setting up a 1920x1080 hdmi console
In:    serial
Out:   vga
Err:   vga
SCSI:  SUNXI SCSI INIT
SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst 
Net:   dwmac.1c50000
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
USB1:   USB EHCI 1.00
scanning bus 1 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0 
## Executing script at 43100000
## Booting kernel from Legacy Image at 42000000 ...
   Image Name:   Linux-3.18.0-00018-g1f4f514
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2709560 Bytes = 2.6 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 43300000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    13809152 Bytes = 13.2 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 43000000
   Booting using the fdt blob at 0x43000000
   Loading Kernel Image ... OK
   Loading Ramdisk to 4e2d4000, end 4efff600 ... OK
   Loading Device Tree to 4e2cb000, end 4e2d34a5 ... OK

Starting kernel ...