Created
March 11, 2026 18:04
-
-
Save tcreswick/04b2af7ef501b8ff591f4072026582dc to your computer and use it in GitHub Desktop.
Hard drive SMART output
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ====================================================== | |
| SMART Report | |
| Device : /dev/sda | |
| Serial : 53Q0A027FX0G | |
| Date : Wed 11 Mar 18:04:08 GMT 2026 | |
| ====================================================== | |
| --- Device Info --- | |
| === START OF INFORMATION SECTION === | |
| Model Family: Toshiba N300/MN NAS HDD | |
| Device Model: TOSHIBA HDWG31G | |
| Serial Number: 53Q0A027FX0G | |
| LU WWN Device Id: 5 000039 c88cb9c36 | |
| Firmware Version: 0601 | |
| User Capacity: 16,000,900,661,248 bytes [16.0 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 7200 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database 7.3/5319 | |
| ATA Version is: ACS-3 T13/2161-D revision 5 | |
| SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Wed Mar 11 18:04:08 2026 GMT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| --- SMART Health Summary --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| --- SMART Attributes --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
| 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
| 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 8149 | |
| 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 223 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
| 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
| 9 Power_On_Hours 0x0032 063 063 000 Old_age Always - 15159 | |
| 10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6 | |
| 23 Helium_Condition_Lower 0x0023 100 100 075 Pre-fail Always - 0 | |
| 24 Helium_Condition_Upper 0x0023 100 100 075 Pre-fail Always - 0 | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1 | |
| 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 671 | |
| 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 34 (Min/Max 21/50) | |
| 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 35 | |
| 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 786433 | |
| 222 Loaded_Hours 0x0032 095 095 000 Old_age Always - 2333 | |
| 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 | |
| 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 527 | |
| 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 | |
| --- SMART Error Log --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART Error Log Version: 1 | |
| ATA Error Count: 35 (device log contains only the most recent five errors) | |
| CR = Command Register [HEX] | |
| FR = Features Register [HEX] | |
| SC = Sector Count Register [HEX] | |
| SN = Sector Number Register [HEX] | |
| CL = Cylinder Low Register [HEX] | |
| CH = Cylinder High Register [HEX] | |
| DH = Device/Head Register [HEX] | |
| DC = Device Command Register [HEX] | |
| ER = Error register [HEX] | |
| ST = Status register [HEX] | |
| Powered_Up_Time is measured from power on, and printed as | |
| DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
| SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
| Error 35 occurred at disk power-on lifetime: 537 hours (22 days + 9 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 43 b8 57 ec 4f 40 Error: ICRC, ABRT at LBA = 0x004fec57 = 5237847 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 00 c8 58 f5 4f 40 00 2d+21:04:26.622 READ FPDMA QUEUED | |
| 60 00 c0 58 ec 4f 40 00 2d+21:04:26.622 READ FPDMA QUEUED | |
| 60 00 b8 58 e4 4f 40 00 2d+21:04:26.622 READ FPDMA QUEUED | |
| 47 00 01 30 08 00 a0 00 2d+21:04:26.617 READ LOG DMA EXT | |
| 47 00 01 30 00 00 a0 00 2d+21:04:26.612 READ LOG DMA EXT | |
| Error 34 occurred at disk power-on lifetime: 537 hours (22 days + 9 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 43 70 57 ec 4f 40 Error: ICRC, ABRT at LBA = 0x004fec57 = 5237847 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 00 20 58 f5 4f 40 00 2d+21:04:25.354 READ FPDMA QUEUED | |
| 60 00 48 58 ec 4f 40 00 2d+21:04:25.354 READ FPDMA QUEUED | |
| 60 00 70 58 e4 4f 40 00 2d+21:04:25.351 READ FPDMA QUEUED | |
| 60 00 a8 58 dd 4f 40 00 2d+21:04:25.343 READ FPDMA QUEUED | |
| 60 00 10 58 d5 4f 40 00 2d+21:04:25.340 READ FPDMA QUEUED | |
| Error 33 occurred at disk power-on lifetime: 537 hours (22 days + 9 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 43 98 7f 40 4f 40 Error: ICRC, ABRT at LBA = 0x004f407f = 5193855 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 00 98 80 38 4f 40 00 2d+21:04:23.975 READ FPDMA QUEUED | |
| 60 00 c0 80 20 4f 40 00 2d+21:04:23.955 READ FPDMA QUEUED | |
| 60 00 b8 80 30 4f 40 00 2d+21:04:23.955 READ FPDMA QUEUED | |
| 60 00 b0 80 28 4f 40 00 2d+21:04:23.955 READ FPDMA QUEUED | |
| 47 00 01 30 08 00 a0 00 2d+21:04:23.950 READ LOG DMA EXT | |
| Error 32 occurred at disk power-on lifetime: 537 hours (22 days + 9 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 43 48 7f 28 4f 40 Error: ICRC, ABRT at LBA = 0x004f287f = 5187711 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 00 50 80 30 4f 40 00 2d+21:04:22.697 READ FPDMA QUEUED | |
| 60 00 80 80 28 4f 40 00 2d+21:04:22.697 READ FPDMA QUEUED | |
| 60 00 48 80 20 4f 40 00 2d+21:04:22.691 READ FPDMA QUEUED | |
| 60 00 40 80 1d 4f 40 00 2d+21:04:22.691 READ FPDMA QUEUED | |
| 60 00 e0 80 15 4f 40 00 2d+21:04:22.685 READ FPDMA QUEUED | |
| Error 31 occurred at disk power-on lifetime: 526 hours (21 days + 22 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 43 20 cf fa b1 40 Error: ICRC, ABRT at LBA = 0x00b1facf = 11664079 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 08 20 c8 fa b1 40 00 2d+09:57:07.944 READ FPDMA QUEUED | |
| 60 08 18 b8 fa b1 40 00 2d+09:57:07.944 READ FPDMA QUEUED | |
| 60 08 10 e0 f9 b1 40 00 2d+09:57:07.944 READ FPDMA QUEUED | |
| 60 08 08 d8 f9 b1 40 00 2d+09:57:07.944 READ FPDMA QUEUED | |
| 60 08 00 10 3d 3f 40 00 2d+09:57:07.944 READ FPDMA QUEUED | |
| --- SMART Self-Test Log --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Short offline Completed without error 00% 484 - | |
| --- Full SMART Data --- | |
| === START OF INFORMATION SECTION === | |
| Model Family: Toshiba N300/MN NAS HDD | |
| Device Model: TOSHIBA HDWG31G | |
| Serial Number: 53Q0A027FX0G | |
| LU WWN Device Id: 5 000039 c88cb9c36 | |
| Firmware Version: 0601 | |
| User Capacity: 16,000,900,661,248 bytes [16.0 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 7200 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database 7.3/5319 | |
| ATA Version is: ACS-3 T13/2161-D revision 5 | |
| SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Wed Mar 11 18:04:08 2026 GMT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x84) Offline data collection activity | |
| was suspended by an interrupting command from host. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 120) seconds. | |
| Offline data collection | |
| capabilities: (0x5b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: (1465) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
| 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
| 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 8149 | |
| 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 223 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
| 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
| 9 Power_On_Hours 0x0032 063 063 000 Old_age Always - 15159 | |
| 10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6 | |
| 23 Helium_Condition_Lower 0x0023 100 100 075 Pre-fail Always - 0 | |
| 24 Helium_Condition_Upper 0x0023 100 100 075 Pre-fail Always - 0 | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1 | |
| 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 671 | |
| 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 34 (Min/Max 21/50) | |
| 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 35 | |
| 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 786433 | |
| 222 Loaded_Hours 0x0032 095 095 000 Old_age Always - 2333 | |
| 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 | |
| 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 527 | |
| 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 | |
| SMART Error Log Version: 1 | |
| ATA Error Count: 35 (device log contains only the most recent five errors) | |
| CR = Command Register [HEX] | |
| FR = Features Register [HEX] | |
| SC = Sector Count Register [HEX] | |
| SN = Sector Number Register [HEX] | |
| CL = Cylinder Low Register [HEX] | |
| CH = Cylinder High Register [HEX] | |
| DH = Device/Head Register [HEX] | |
| DC = Device Command Register [HEX] | |
| ER = Error register [HEX] | |
| ST = Status register [HEX] | |
| Powered_Up_Time is measured from power on, and printed as | |
| DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
| SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
| Error 35 occurred at disk power-on lifetime: 537 hours (22 days + 9 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 43 b8 57 ec 4f 40 Error: ICRC, ABRT at LBA = 0x004fec57 = 5237847 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 00 c8 58 f5 4f 40 00 2d+21:04:26.622 READ FPDMA QUEUED | |
| 60 00 c0 58 ec 4f 40 00 2d+21:04:26.622 READ FPDMA QUEUED | |
| 60 00 b8 58 e4 4f 40 00 2d+21:04:26.622 READ FPDMA QUEUED | |
| 47 00 01 30 08 00 a0 00 2d+21:04:26.617 READ LOG DMA EXT | |
| 47 00 01 30 00 00 a0 00 2d+21:04:26.612 READ LOG DMA EXT | |
| Error 34 occurred at disk power-on lifetime: 537 hours (22 days + 9 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 43 70 57 ec 4f 40 Error: ICRC, ABRT at LBA = 0x004fec57 = 5237847 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 00 20 58 f5 4f 40 00 2d+21:04:25.354 READ FPDMA QUEUED | |
| 60 00 48 58 ec 4f 40 00 2d+21:04:25.354 READ FPDMA QUEUED | |
| 60 00 70 58 e4 4f 40 00 2d+21:04:25.351 READ FPDMA QUEUED | |
| 60 00 a8 58 dd 4f 40 00 2d+21:04:25.343 READ FPDMA QUEUED | |
| 60 00 10 58 d5 4f 40 00 2d+21:04:25.340 READ FPDMA QUEUED | |
| Error 33 occurred at disk power-on lifetime: 537 hours (22 days + 9 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 43 98 7f 40 4f 40 Error: ICRC, ABRT at LBA = 0x004f407f = 5193855 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 00 98 80 38 4f 40 00 2d+21:04:23.975 READ FPDMA QUEUED | |
| 60 00 c0 80 20 4f 40 00 2d+21:04:23.955 READ FPDMA QUEUED | |
| 60 00 b8 80 30 4f 40 00 2d+21:04:23.955 READ FPDMA QUEUED | |
| 60 00 b0 80 28 4f 40 00 2d+21:04:23.955 READ FPDMA QUEUED | |
| 47 00 01 30 08 00 a0 00 2d+21:04:23.950 READ LOG DMA EXT | |
| Error 32 occurred at disk power-on lifetime: 537 hours (22 days + 9 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 43 48 7f 28 4f 40 Error: ICRC, ABRT at LBA = 0x004f287f = 5187711 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 00 50 80 30 4f 40 00 2d+21:04:22.697 READ FPDMA QUEUED | |
| 60 00 80 80 28 4f 40 00 2d+21:04:22.697 READ FPDMA QUEUED | |
| 60 00 48 80 20 4f 40 00 2d+21:04:22.691 READ FPDMA QUEUED | |
| 60 00 40 80 1d 4f 40 00 2d+21:04:22.691 READ FPDMA QUEUED | |
| 60 00 e0 80 15 4f 40 00 2d+21:04:22.685 READ FPDMA QUEUED | |
| Error 31 occurred at disk power-on lifetime: 526 hours (21 days + 22 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 43 20 cf fa b1 40 Error: ICRC, ABRT at LBA = 0x00b1facf = 11664079 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 08 20 c8 fa b1 40 00 2d+09:57:07.944 READ FPDMA QUEUED | |
| 60 08 18 b8 fa b1 40 00 2d+09:57:07.944 READ FPDMA QUEUED | |
| 60 08 10 e0 f9 b1 40 00 2d+09:57:07.944 READ FPDMA QUEUED | |
| 60 08 08 d8 f9 b1 40 00 2d+09:57:07.944 READ FPDMA QUEUED | |
| 60 08 00 10 3d 3f 40 00 2d+09:57:07.944 READ FPDMA QUEUED | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Short offline Completed without error 00% 484 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ====================================================== | |
| SMART Report | |
| Device : /dev/sdd | |
| Serial : ZCT1NV71 | |
| Date : Wed 11 Mar 18:04:10 GMT 2026 | |
| ====================================================== | |
| --- Device Info --- | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate BarraCuda 3.5 (SMR) | |
| Device Model: ST8000DM004-2CX188 | |
| Serial Number: ZCT1NV71 | |
| LU WWN Device Id: 5 000c50 0c42c80c5 | |
| Firmware Version: 0001 | |
| User Capacity: 8,001,563,222,016 bytes [8.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 5425 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database 7.3/5319 | |
| ATA Version is: ACS-3 T13/2161-D revision 5 | |
| SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Wed Mar 11 18:04:10 2026 GMT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| --- SMART Health Summary --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| Please note the following marginal Attributes: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1 | |
| --- SMART Attributes --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000f 080 064 006 Pre-fail Always - 93724639 | |
| 3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0 | |
| 4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4289 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000f 092 060 045 Pre-fail Always - 5904945828 | |
| 9 Power_On_Hours 0x0032 045 045 000 Old_age Always - 48823h+40m+25.485s | |
| 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3815 | |
| 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 | |
| 184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
| 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 1 2 30 | |
| 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0022 067 060 040 Old_age Always - 33 (Min/Max 26/38) | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 936 | |
| 193 Load_Cycle_Count 0x0032 096 096 000 Old_age Always - 8521 | |
| 194 Temperature_Celsius 0x0022 033 040 000 Old_age Always - 33 (0 25 0 0 0) | |
| 195 Hardware_ECC_Recovered 0x001a 080 064 000 Old_age Always - 93724639 | |
| 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 4 | |
| 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 48453h+39m+26.819s | |
| 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 129139211301 | |
| 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2489945016179 | |
| --- SMART Error Log --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART Error Log Version: 1 | |
| ATA Error Count: 1 | |
| CR = Command Register [HEX] | |
| FR = Features Register [HEX] | |
| SC = Sector Count Register [HEX] | |
| SN = Sector Number Register [HEX] | |
| CL = Cylinder Low Register [HEX] | |
| CH = Cylinder High Register [HEX] | |
| DH = Device/Head Register [HEX] | |
| DC = Device Command Register [HEX] | |
| ER = Error register [HEX] | |
| ST = Status register [HEX] | |
| Powered_Up_Time is measured from power on, and printed as | |
| DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
| SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
| Error 1 occurred at disk power-on lifetime: 5754 hours (239 days + 18 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 04 73 04 80 87 80 e0 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| ea 00 00 00 00 00 a0 00 40d+21:59:27.656 FLUSH CACHE EXT | |
| 61 00 70 ff ff ff 4f 00 40d+21:59:27.655 WRITE FPDMA QUEUED | |
| 61 00 18 ff ff ff 4f 00 40d+21:59:27.655 WRITE FPDMA QUEUED | |
| 61 00 70 ff ff ff 4f 00 40d+21:59:27.654 WRITE FPDMA QUEUED | |
| 61 00 70 ff ff ff 4f 00 40d+21:59:27.654 WRITE FPDMA QUEUED | |
| --- SMART Self-Test Log --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART Self-test log structure revision number 1 | |
| No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
| --- Full SMART Data --- | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate BarraCuda 3.5 (SMR) | |
| Device Model: ST8000DM004-2CX188 | |
| Serial Number: ZCT1NV71 | |
| LU WWN Device Id: 5 000c50 0c42c80c5 | |
| Firmware Version: 0001 | |
| User Capacity: 8,001,563,222,016 bytes [8.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 5425 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database 7.3/5319 | |
| ATA Version is: ACS-3 T13/2161-D revision 5 | |
| SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Wed Mar 11 18:04:10 2026 GMT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| See vendor-specific Attribute list for marginal Attributes. | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x73) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 1) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 963) minutes. | |
| Conveyance self-test routine | |
| recommended polling time: ( 2) minutes. | |
| SCT capabilities: (0x30a5) SCT Status supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000f 080 064 006 Pre-fail Always - 93724639 | |
| 3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0 | |
| 4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4289 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000f 092 060 045 Pre-fail Always - 5904945834 | |
| 9 Power_On_Hours 0x0032 045 045 000 Old_age Always - 48823h+40m+25.772s | |
| 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3815 | |
| 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 | |
| 184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
| 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 1 2 30 | |
| 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0022 067 060 040 Old_age Always - 33 (Min/Max 26/38) | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 936 | |
| 193 Load_Cycle_Count 0x0032 096 096 000 Old_age Always - 8521 | |
| 194 Temperature_Celsius 0x0022 033 040 000 Old_age Always - 33 (0 25 0 0 0) | |
| 195 Hardware_ECC_Recovered 0x001a 080 064 000 Old_age Always - 93724639 | |
| 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 4 | |
| 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 48453h+39m+27.107s | |
| 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 129139211301 | |
| 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2489945016179 | |
| SMART Error Log Version: 1 | |
| ATA Error Count: 1 | |
| CR = Command Register [HEX] | |
| FR = Features Register [HEX] | |
| SC = Sector Count Register [HEX] | |
| SN = Sector Number Register [HEX] | |
| CL = Cylinder Low Register [HEX] | |
| CH = Cylinder High Register [HEX] | |
| DH = Device/Head Register [HEX] | |
| DC = Device Command Register [HEX] | |
| ER = Error register [HEX] | |
| ST = Status register [HEX] | |
| Powered_Up_Time is measured from power on, and printed as | |
| DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
| SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
| Error 1 occurred at disk power-on lifetime: 5754 hours (239 days + 18 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 04 73 04 80 87 80 e0 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| ea 00 00 00 00 00 a0 00 40d+21:59:27.656 FLUSH CACHE EXT | |
| 61 00 70 ff ff ff 4f 00 40d+21:59:27.655 WRITE FPDMA QUEUED | |
| 61 00 18 ff ff ff 4f 00 40d+21:59:27.655 WRITE FPDMA QUEUED | |
| 61 00 70 ff ff ff 4f 00 40d+21:59:27.654 WRITE FPDMA QUEUED | |
| 61 00 70 ff ff ff 4f 00 40d+21:59:27.654 WRITE FPDMA QUEUED | |
| SMART Self-test log structure revision number 1 | |
| No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ====================================================== | |
| SMART Report | |
| Device : /dev/sdc | |
| Serial : ZCT1NY09 | |
| Date : Wed 11 Mar 18:04:09 GMT 2026 | |
| ====================================================== | |
| --- Device Info --- | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate BarraCuda 3.5 (SMR) | |
| Device Model: ST8000DM004-2CX188 | |
| Serial Number: ZCT1NY09 | |
| LU WWN Device Id: 5 000c50 0c42b29ea | |
| Firmware Version: 0001 | |
| User Capacity: 8,001,563,222,016 bytes [8.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 5425 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database 7.3/5319 | |
| ATA Version is: ACS-3 T13/2161-D revision 5 | |
| SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Wed Mar 11 18:04:09 2026 GMT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| --- SMART Health Summary --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| --- SMART Attributes --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000f 078 064 006 Pre-fail Always - 60498399 | |
| 3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0 | |
| 4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4290 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000f 093 061 045 Pre-fail Always - 6308706848 | |
| 9 Power_On_Hours 0x0032 040 040 000 Old_age Always - 52900h+12m+47.698s | |
| 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3815 | |
| 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 | |
| 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
| 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 1 1 35 | |
| 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0022 066 059 040 Old_age Always - 34 (Min/Max 26/38) | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 888 | |
| 193 Load_Cycle_Count 0x0032 094 094 000 Old_age Always - 13308 | |
| 194 Temperature_Celsius 0x0022 034 041 000 Old_age Always - 34 (0 24 0 0 0) | |
| 195 Hardware_ECC_Recovered 0x001a 078 064 000 Old_age Always - 60498399 | |
| 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 | |
| 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 52197h+35m+08.835s | |
| 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 162892091131 | |
| 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2888605856648 | |
| --- SMART Error Log --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| --- SMART Self-Test Log --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART Self-test log structure revision number 1 | |
| No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
| --- Full SMART Data --- | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate BarraCuda 3.5 (SMR) | |
| Device Model: ST8000DM004-2CX188 | |
| Serial Number: ZCT1NY09 | |
| LU WWN Device Id: 5 000c50 0c42b29ea | |
| Firmware Version: 0001 | |
| User Capacity: 8,001,563,222,016 bytes [8.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 5425 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database 7.3/5319 | |
| ATA Version is: ACS-3 T13/2161-D revision 5 | |
| SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Wed Mar 11 18:04:10 2026 GMT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x73) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 1) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 953) minutes. | |
| Conveyance self-test routine | |
| recommended polling time: ( 2) minutes. | |
| SCT capabilities: (0x30a5) SCT Status supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000f 078 064 006 Pre-fail Always - 60498399 | |
| 3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0 | |
| 4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4290 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000f 093 061 045 Pre-fail Always - 6308706854 | |
| 9 Power_On_Hours 0x0032 040 040 000 Old_age Always - 52900h+12m+47.996s | |
| 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3815 | |
| 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 | |
| 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
| 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 1 1 35 | |
| 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0022 066 059 040 Old_age Always - 34 (Min/Max 26/38) | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 888 | |
| 193 Load_Cycle_Count 0x0032 094 094 000 Old_age Always - 13308 | |
| 194 Temperature_Celsius 0x0022 034 041 000 Old_age Always - 34 (0 24 0 0 0) | |
| 195 Hardware_ECC_Recovered 0x001a 078 064 000 Old_age Always - 60498399 | |
| 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 | |
| 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 52197h+35m+09.134s | |
| 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 162892091131 | |
| 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2888605856648 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ====================================================== | |
| SMART Report | |
| Device : /dev/sde | |
| Serial : ZPV09DLA | |
| Date : Wed 11 Mar 18:04:10 GMT 2026 | |
| ====================================================== | |
| --- Device Info --- | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate IronWolf | |
| Device Model: ST8000VN002-2ZM188 | |
| Serial Number: ZPV09DLA | |
| LU WWN Device Id: 5 000c50 0e7785fc1 | |
| Firmware Version: SC60 | |
| User Capacity: 8,001,563,222,016 bytes [8.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 5400 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database 7.3/5319 | |
| ATA Version is: ACS-3 T13/2161-D revision 5 | |
| SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Wed Mar 11 18:04:10 2026 GMT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| --- SMART Health Summary --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| --- SMART Attributes --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000f 082 064 006 Pre-fail Always - 152719327 | |
| 3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0 | |
| 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 13 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000f 083 060 045 Pre-fail Always - 208062215 | |
| 9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 14869 | |
| 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 5 | |
| 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 | |
| 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
| 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032836 | |
| 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0022 067 049 040 Old_age Always - 33 (Min/Max 27/39) | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 139 | |
| 193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 7100 | |
| 194 Temperature_Celsius 0x0022 033 051 000 Old_age Always - 33 (0 25 0 0 0) | |
| 195 Hardware_ECC_Recovered 0x001a 082 064 000 Old_age Always - 152719327 | |
| 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 2 | |
| 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 14083h+38m+07.885s | |
| 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 162773566942 | |
| 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 890164883519 | |
| --- SMART Error Log --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| --- SMART Self-Test Log --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Aborted by host 50% 147 - | |
| # 2 Conveyance offline Completed without error 00% 125 - | |
| # 3 Short offline Completed without error 00% 125 - | |
| # 4 Short offline Completed without error 00% 123 - | |
| # 5 Extended offline Interrupted (host reset) 70% 21 - | |
| # 6 Extended offline Aborted by host 90% 12 - | |
| # 7 Extended offline Aborted by host 90% 12 - | |
| # 8 Short offline Completed without error 00% 12 - | |
| --- Full SMART Data --- | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate IronWolf | |
| Device Model: ST8000VN002-2ZM188 | |
| Serial Number: ZPV09DLA | |
| LU WWN Device Id: 5 000c50 0e7785fc1 | |
| Firmware Version: SC60 | |
| User Capacity: 8,001,563,222,016 bytes [8.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 5400 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database 7.3/5319 | |
| ATA Version is: ACS-3 T13/2161-D revision 5 | |
| SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Wed Mar 11 18:04:11 2026 GMT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x73) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 1) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 893) minutes. | |
| Conveyance self-test routine | |
| recommended polling time: ( 2) minutes. | |
| SCT capabilities: (0x70bd) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000f 082 064 006 Pre-fail Always - 152719327 | |
| 3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0 | |
| 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 13 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000f 083 060 045 Pre-fail Always - 208062221 | |
| 9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 14869 | |
| 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 5 | |
| 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 | |
| 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
| 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032836 | |
| 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0022 067 049 040 Old_age Always - 33 (Min/Max 27/39) | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 139 | |
| 193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 7100 | |
| 194 Temperature_Celsius 0x0022 033 051 000 Old_age Always - 33 (0 25 0 0 0) | |
| 195 Hardware_ECC_Recovered 0x001a 082 064 000 Old_age Always - 152719327 | |
| 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 2 | |
| 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 14083h+38m+08.125s | |
| 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 162773566942 | |
| 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 890164883519 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Aborted by host 50% 147 - | |
| # 2 Conveyance offline Completed without error 00% 125 - | |
| # 3 Short offline Completed without error 00% 125 - | |
| # 4 Short offline Completed without error 00% 123 - | |
| # 5 Extended offline Interrupted (host reset) 70% 21 - | |
| # 6 Extended offline Aborted by host 90% 12 - | |
| # 7 Extended offline Aborted by host 90% 12 - | |
| # 8 Short offline Completed without error 00% 12 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ====================================================== | |
| SMART Report | |
| Device : /dev/sdb | |
| Serial : ZPV09KCT | |
| Date : Wed 11 Mar 18:04:09 GMT 2026 | |
| ====================================================== | |
| --- Device Info --- | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate IronWolf | |
| Device Model: ST8000VN002-2ZM188 | |
| Serial Number: ZPV09KCT | |
| LU WWN Device Id: 5 000c50 0e777e66e | |
| Firmware Version: SC60 | |
| User Capacity: 8,001,563,222,016 bytes [8.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 5400 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database 7.3/5319 | |
| ATA Version is: ACS-3 T13/2161-D revision 5 | |
| SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Wed Mar 11 18:04:09 2026 GMT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| --- SMART Health Summary --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| --- SMART Attributes --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000f 068 064 006 Pre-fail Always - 6763231 | |
| 3 Spin_Up_Time 0x0003 091 091 000 Pre-fail Always - 0 | |
| 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 16 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000f 083 060 045 Pre-fail Always - 208861822 | |
| 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 14903 | |
| 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 6 | |
| 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 | |
| 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
| 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 | |
| 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0022 068 049 040 Old_age Always - 32 (Min/Max 26/37) | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 6 | |
| 193 Load_Cycle_Count 0x0032 094 094 000 Old_age Always - 13047 | |
| 194 Temperature_Celsius 0x0022 032 051 000 Old_age Always - 32 (0 25 0 0 0) | |
| 195 Hardware_ECC_Recovered 0x001a 068 064 000 Old_age Always - 6763231 | |
| 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 20 | |
| 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 13374h+16m+42.244s | |
| 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 148155155971 | |
| 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 825250025260 | |
| --- SMART Error Log --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| --- SMART Self-Test Log --- | |
| === START OF READ SMART DATA SECTION === | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Short offline Completed without error 00% 157 - | |
| --- Full SMART Data --- | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate IronWolf | |
| Device Model: ST8000VN002-2ZM188 | |
| Serial Number: ZPV09KCT | |
| LU WWN Device Id: 5 000c50 0e777e66e | |
| Firmware Version: SC60 | |
| User Capacity: 8,001,563,222,016 bytes [8.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 5400 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database 7.3/5319 | |
| ATA Version is: ACS-3 T13/2161-D revision 5 | |
| SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Wed Mar 11 18:04:09 2026 GMT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x73) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 1) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 902) minutes. | |
| Conveyance self-test routine | |
| recommended polling time: ( 2) minutes. | |
| SCT capabilities: (0x70bd) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000f 068 064 006 Pre-fail Always - 6763231 | |
| 3 Spin_Up_Time 0x0003 091 091 000 Pre-fail Always - 0 | |
| 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 16 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000f 083 060 045 Pre-fail Always - 208861828 | |
| 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 14903 | |
| 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 6 | |
| 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 | |
| 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
| 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 | |
| 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0022 068 049 040 Old_age Always - 32 (Min/Max 26/37) | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 6 | |
| 193 Load_Cycle_Count 0x0032 094 094 000 Old_age Always - 13047 | |
| 194 Temperature_Celsius 0x0022 032 051 000 Old_age Always - 32 (0 25 0 0 0) | |
| 195 Hardware_ECC_Recovered 0x001a 068 064 000 Old_age Always - 6763231 | |
| 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 20 | |
| 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 13374h+16m+42.484s | |
| 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 148155155971 | |
| 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 825250025260 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Short offline Completed without error 00% 157 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment