thirdeye-yusuf

root@ubuntu:/storage/Linux_for_Tegra# BOARDID=2888 FAB=400 BOARDSKU=0001 BOARDREV=H.0 ./flash.sh --no-fl
ash -u /storage/keys/pkc.pem -v /storage/keys/sbk.txt jetson-xavier mmcblk0p1
###############################################################################
# L4T BSP Information:
# R32 , REVISION: 3.1
###############################################################################
Board ID(2888) version(400) sku(0001) revision(H.0)
copying bctfile(/storage/Linux_for_Tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-memcfg-p2888.cfg)... done.
copying bctfile1(/storage/Linux_for_Tegra/bootloader/t186ref/BCT/tegra194-memcfg-sw-override.cfg)... done.
copying uphy_config(/storage/Linux_for_Tegra/bootloader/t186ref/BCT/tegra194-mb1-uphy-lane-p2888-0000-p2822-0000.cfg)... done.

thirdeye-yusuf

Rebooting system ...

[0000.053] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses.
[0000.062] I> MB1 (prd-version: 1.5.1.2-t194-41334769-9ec1833d)
[0000.067] I> Boot-mode: Coldboot
[0000.070] I> Chip revision : A02
[0000.073] I> Bootrom patch version : 15 (correctly patched)
[0000.078] I> ATE fuse revision : 0x200
[0000.082] I> Ram repair fuse : 0x0
[0000.085] I> Ram Code : 0x2

thirdeye-yusuf

root@ubuntu:~# minicom -D /dev/ttyUSB3 -8 -b 115200

Welcome to minicom 2.7.1

OPTIONS: I18n
Compiled on Aug 13 2017, 15:25:34.
Port /dev/ttyUSB3, 14:00:18

Press CTRL-A Z for help on special keys