-
-
Save thisismiller/203a3c622c8779cf2f73b86e7d31a650 to your computer and use it in GitHub Desktop.
Example nvme id-ctrl output
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
NVME Identify Controller: | |
vid : 0x144d | |
ssvid : 0x144d | |
sn : S675NF0R460805 | |
mn : SAMSUNG MZVL2512HCJQ-00B00 | |
fr : GXA7301Q | |
rab : 2 | |
ieee : 002538 | |
cmic : 0 | |
[3:3] : 0 ANA not supported | |
[2:2] : 0 PCI | |
[1:1] : 0 Single Controller | |
[0:0] : 0 Single Port | |
mdts : 7 | |
cntlid : 0x6 | |
ver : 0x10300 | |
rtd3r : 0x30d40 | |
rtd3e : 0x989680 | |
oaes : 0x200 | |
[31:31] : 0 Discovery Log Change Notice Not Supported | |
[27:27] : 0 Zone Descriptor Changed Notices Not Supported | |
[15:15] : 0 Normal NSS Shutdown Event Not Supported | |
[14:14] : 0 Endurance Group Event Aggregate Log Page Change Notice Not Supported | |
[13:13] : 0 LBA Status Information Notices Not Supported | |
[12:12] : 0 Predictable Latency Event Aggregate Log Change Notices Not Supported | |
[11:11] : 0 Asymmetric Namespace Access Change Notices Not Supported | |
[9:9] : 0x1 Firmware Activation Notices Supported | |
[8:8] : 0 Namespace Attribute Changed Event Not Supported | |
ctratt : 0x10 | |
[19:19] : 0 Flexible Data Placement Not Supported | |
[15:15] : 0 Extended LBA Formats Not Supported | |
[14:14] : 0 Delete NVM Set Not Supported | |
[13:13] : 0 Delete Endurance Group Not Supported | |
[12:12] : 0 Variable Capacity Management Not Supported | |
[11:11] : 0 Fixed Capacity Management Not Supported | |
[10:10] : 0 Multi Domain Subsystem Not Supported | |
[9:9] : 0 UUID List Not Supported | |
[8:8] : 0 SQ Associations Not Supported | |
[7:7] : 0 Namespace Granularity Not Supported | |
[6:6] : 0 Traffic Based Keep Alive Not Supported | |
[5:5] : 0 Predictable Latency Mode Not Supported | |
[4:4] : 0x1 Endurance Groups Supported | |
[3:3] : 0 Read Recovery Levels Not Supported | |
[2:2] : 0 NVM Sets Not Supported | |
[1:1] : 0 Non-Operational Power State Permissive Not Supported | |
[0:0] : 0 128-bit Host Identifier Not Supported | |
rrls : 0 | |
cntrltype : 0 | |
[7:2] : 0 Reserved | |
[1:0] : 0 Controller type not reported | |
fguid : 00000000-0000-0000-0000-000000000000 | |
crdt1 : 0 | |
crdt2 : 0 | |
crdt3 : 0 | |
nvmsr : 0 | |
[1:1] : 0 NVM subsystem Not part of an Enclosure | |
[0:0] : 0 NVM subsystem Not part of a Storage Device | |
vwci : 0 | |
[7:7] : 0 VPD Write Cycles Remaining field is Not valid. | |
[6:0] : 0 VPD Write Cycles Remaining | |
mec : 0 | |
[1:1] : 0 NVM subsystem Not contains a Management Endpoint on a PCIe port | |
[0:0] : 0 NVM subsystem Not contains a Management Endpoint on an SMBus/I2C port | |
oacs : 0x17 | |
[10:10] : 0 Lockdown Command and Feature Not Supported | |
[9:9] : 0 Get LBA Status Capability Not Supported | |
[8:8] : 0 Doorbell Buffer Config Not Supported | |
[7:7] : 0 Virtualization Management Not Supported | |
[6:6] : 0 NVMe-MI Send and Receive Not Supported | |
[5:5] : 0 Directives Not Supported | |
[4:4] : 0x1 Device Self-test Supported | |
[3:3] : 0 NS Management and Attachment Not Supported | |
[2:2] : 0x1 FW Commit and Download Supported | |
[1:1] : 0x1 Format NVM Supported | |
[0:0] : 0x1 Security Send and Receive Supported | |
acl : 7 | |
aerl : 3 | |
frmw : 0x16 | |
[5:5] : 0 Multiple FW or Boot Update Detection Not Supported | |
[4:4] : 0x1 Firmware Activate Without Reset Supported | |
[3:1] : 0x3 Number of Firmware Slots | |
[0:0] : 0 Firmware Slot 1 Read/Write | |
lpa : 0xe | |
[6:6] : 0 Telemetry Log Data Area 4 Not Supported | |
[5:5] : 0 LID 0x0, Scope of each command in LID 0x5, 0x12, 0x13 Not Supported | |
[4:4] : 0 Persistent Event log Not Supported | |
[3:3] : 0x1 Telemetry host/controller initiated log page Supported | |
[2:2] : 0x1 Extended data for Get Log Page Supported | |
[1:1] : 0x1 Command Effects Log Page Supported | |
[0:0] : 0 SMART/Health Log Page per NS Not Supported | |
elpe : 63 | |
[7:0] : 63 (0's based) Error Log Page Entries (ELPE) | |
npss : 4 | |
[7:0] : 4 (0's based) Number of Power States Support (NPSS) | |
avscc : 0x1 | |
[0:0] : 0x1 Admin Vendor Specific Commands uses NVMe Format | |
apsta : 0x1 | |
[0:0] : 0x1 Autonomous Power State Transitions Supported | |
wctemp : 354 | |
[15:0] : 81 °C (354 K) Warning Composite Temperature Threshold (WCTEMP) | |
cctemp : 358 | |
[15:0] : 85 °C (358 K) Critical Composite Temperature Threshold (CCTEMP) | |
mtfa : 0 | |
hmpre : 0 | |
hmmin : 0 | |
tnvmcap : 512,110,190,592 | |
[127:0] : 512,110,190,592 | |
Total NVM Capacity (TNVMCAP) | |
unvmcap : 0 | |
[127:0] : 0 | |
Unallocated NVM Capacity (UNVMCAP) | |
rpmbs : 0 | |
[31:24]: 0 Access Size | |
[23:16]: 0 Total Size | |
[5:3] : 0 Authentication Method | |
[2:0] : 0 Number of RPMB Units | |
edstt : 35 | |
dsto : 0 | |
fwug : 0 | |
kas : 0 | |
hctma : 0x1 | |
[0:0] : 0x1 Host Controlled Thermal Management Supported | |
mntmt : 318 | |
[15:0] : 45 °C (318 K) Minimum Thermal Management Temperature (MNTMT) | |
mxtmt : 356 | |
[15:0] : 83 °C (356 K) Maximum Thermal Management Temperature (MXTMT) | |
sanicap : 0x2 | |
[31:30] : 0 Additional media modification after sanitize operation completes successfully is not defined | |
[29:29] : 0 No-Deallocate After Sanitize bit in Sanitize command Supported | |
[2:2] : 0 Overwrite Sanitize Operation Not Supported | |
[1:1] : 0x1 Block Erase Sanitize Operation Supported | |
[0:0] : 0 Crypto Erase Sanitize Operation Not Supported | |
hmminds : 0 | |
hmmaxd : 0 | |
nsetidmax : 0 | |
endgidmax : 1 | |
anatt : 0 | |
anacap : 0 | |
[7:7] : 0 Non-zero group ID Not Supported | |
[6:6] : 0 Group ID does change | |
[4:4] : 0 ANA Change state Not Supported | |
[3:3] : 0 ANA Persistent Loss state Not Supported | |
[2:2] : 0 ANA Inaccessible state Not Supported | |
[1:1] : 0 ANA Non-optimized state Not Supported | |
[0:0] : 0 ANA Optimized state Not Supported | |
anagrpmax : 0 | |
nanagrpid : 0 | |
pels : 0 | |
domainid : 0 | |
megcap : 0 | |
sqes : 0x66 | |
[7:4] : 0x6 Max SQ Entry Size (64) | |
[3:0] : 0x6 Min SQ Entry Size (64) | |
cqes : 0x44 | |
[7:4] : 0x4 Max CQ Entry Size (16) | |
[3:0] : 0x4 Min CQ Entry Size (16) | |
maxcmd : 256 | |
nn : 1 | |
oncs : 0x57 | |
[10:10] : 0 All Fast Copy Not Supported | |
[9:9] : 0 Copy Single Atomicity Not Supported | |
[8:8] : 0 Copy Not Supported | |
[7:7] : 0 Verify Not Supported | |
[6:6] : 0x1 Timestamp Supported | |
[5:5] : 0 Reservations Not Supported | |
[4:4] : 0x1 Save and Select Supported | |
[3:3] : 0 Write Zeroes Not Supported | |
[2:2] : 0x1 Data Set Management Supported | |
[1:1] : 0x1 Write Uncorrectable Supported | |
[0:0] : 0x1 Compare Supported | |
fuses : 0 | |
[0:0] : 0 Fused Compare and Write Not Supported | |
fna : 0 | |
[3:3] : 0 Format NVM Broadcast NSID (FFFFFFFFh) Supported | |
[2:2] : 0 Crypto Erase Not Supported as part of Secure Erase | |
[1:1] : 0 Crypto Erase Applies to Single Namespace(s) | |
[0:0] : 0 Format Applies to Single Namespace(s) | |
vwc : 0x7 | |
[2:1] : 0x3 The Flush command supports NSID set to FFFFFFFFh | |
[0:0] : 0x1 Volatile Write Cache Present | |
awun : 1023 | |
awupf : 0 | |
icsvscc : 1 | |
[0:0] : 0x1 NVM Vendor Specific Commands uses NVMe Format | |
nwpc : 0 | |
[2:2] : 0 Permanent Write Protect Not Supported | |
[1:1] : 0 Write Protect Until Power Supply Not Supported | |
[0:0] : 0 No Write Protect and Write Protect Namespace Not Supported | |
acwu : 0 | |
ocfs : 0 | |
[3:3] : 0 Controller Copy Format 3h Not Supported | |
[2:2] : 0 Controller Copy Format 2h Not Supported | |
[1:1] : 0 Controller Copy Format 1h Not Supported | |
[0:0] : 0 Controller Copy Format 0h Not Supported | |
sgls : 0 | |
[15:8] : 0 SGL Descriptor Threshold | |
[1:0] : 0 Scatter-Gather Lists Not Supported | |
mnan : 0 | |
maxdna : 0 | |
maxcna : 0 | |
oaqd : 0 | |
subnqn : nqn.1994-11.com.samsung:nvme:PM9A1:M.2:S675NF0R460805 | |
ioccsz : 0 | |
iorcsz : 0 | |
icdoff : 0 | |
fcatt : 0 | |
[0:0] : 0 Dynamic Controller Model | |
msdbd : 0 | |
ofcs : 0 | |
[0:0] : 0 Disconnect command Not Supported | |
ps 0 : mp:8.37W operational enlat:0 exlat:0 rrt:0 rrl:0 | |
rwt:0 rwl:0 idle_power:- active_power:- | |
active_power_workload:- | |
ps 1 : mp:8.37W operational enlat:0 exlat:200 rrt:1 rrl:1 | |
rwt:1 rwl:1 idle_power:- active_power:- | |
active_power_workload:- | |
ps 2 : mp:8.37W operational enlat:0 exlat:200 rrt:2 rrl:2 | |
rwt:2 rwl:2 idle_power:- active_power:- | |
active_power_workload:- | |
ps 3 : mp:0.0500W non-operational enlat:2000 exlat:1200 rrt:3 rrl:3 | |
rwt:3 rwl:3 idle_power:- active_power:- | |
active_power_workload:- | |
ps 4 : mp:0.0050W non-operational enlat:500 exlat:9500 rrt:4 rrl:4 | |
rwt:4 rwl:4 idle_power:- active_power:- | |
active_power_workload:- |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment