Raspberry Pi dmesg errors with Apple USB keyboard
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 56 | |
usb 1-1.3: new high speed USB device number 61 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 62 using dwc_otg | |
usb 1-1.3.2: New USB device found, idVendor=05ac, idProduct=0220 | |
usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
usb 1-1.3.2: Product: Apple Keyboard | |
usb 1-1.3.2: Manufacturer: Apple, Inc | |
usb 1-1.3.2: can't set config #1, error -71 | |
usb 1-1.3: USB disconnect, device number 61 | |
usb 1-1.3.2: USB disconnect, device number 62 | |
usb 1-1.3: new high speed USB device number 63 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 64 using dwc_otg | |
usb 1-1.3.2: New USB device found, idVendor=05ac, idProduct=0220 | |
usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
usb 1-1.3.2: Product: Apple Keyboard | |
usb 1-1.3.2: Manufacturer: Apple, Inc | |
apple 0003:05AC:0220.0003: parse failed | |
apple: probe of 0003:05AC:0220.0003 failed with error -71 | |
apple 0003:05AC:0220.0004: parse failed | |
apple: probe of 0003:05AC:0220.0004 failed with error -71 | |
usb 1-1.3: USB disconnect, device number 63 | |
usb 1-1.3.2: USB disconnect, device number 64 | |
usb 1-1.3: new high speed USB device number 65 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 66 using dwc_otg | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 65 | |
usb 1-1.3: new high speed USB device number 70 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 71 using dwc_otg | |
usb 1-1.3.2: New USB device found, idVendor=05ac, idProduct=0220 | |
usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
usb 1-1.3.2: Product: Apple Keyboard | |
usb 1-1.3.2: Manufacturer: Apple, Inc | |
usb 1-1.3.2: can't set config #1, error -71 | |
usb 1-1.3: USB disconnect, device number 70 | |
usb 1-1.3.2: USB disconnect, device number 71 | |
usb 1-1.3: new high speed USB device number 72 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 73 using dwc_otg | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 72 | |
usb 1-1.3: new high speed USB device number 77 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 78 using dwc_otg | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 77 | |
usb 1-1.3: new high speed USB device number 82 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 83 using dwc_otg | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 82 | |
usb 1-1.3: new high speed USB device number 87 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 88 using dwc_otg | |
usb 1-1.3.2: New USB device found, idVendor=05ac, idProduct=0220 | |
usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
usb 1-1.3.2: Product: Apple Keyboard | |
usb 1-1.3.2: Manufacturer: Apple, Inc | |
usb 1-1.3.2: can't set config #1, error -71 | |
usb 1-1.3: USB disconnect, device number 87 | |
usb 1-1.3.2: USB disconnect, device number 88 | |
usb 1-1.3: new high speed USB device number 89 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 90 using dwc_otg | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 89 | |
usb 1-1.3: new high speed USB device number 94 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 95 using dwc_otg | |
usb 1-1.3.2: New USB device found, idVendor=05ac, idProduct=0220 | |
usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
usb 1-1.3.2: Product: Apple Keyboard | |
usb 1-1.3.2: Manufacturer: Apple, Inc | |
usb 1-1.3.2: can't set config #1, error -71 | |
usb 1-1.3: USB disconnect, device number 94 | |
usb 1-1.3.2: USB disconnect, device number 95 | |
usb 1-1.3: new high speed USB device number 96 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 97 using dwc_otg | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 96 | |
usb 1-1.3: new high speed USB device number 101 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 102 using dwc_otg | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 101 | |
usb 1-1.3: new high speed USB device number 106 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 107 using dwc_otg | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 106 | |
usb 1-1.3: new high speed USB device number 111 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 112 using dwc_otg | |
usb 1-1.3.2: New USB device found, idVendor=05ac, idProduct=0220 | |
usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
usb 1-1.3.2: Product: Apple Keyboard | |
usb 1-1.3.2: Manufacturer: Apple, Inc | |
usb 1-1.3.2: can't set config #1, error -71 | |
usb 1-1.3: USB disconnect, device number 111 | |
usb 1-1.3.2: USB disconnect, device number 112 | |
usb 1-1.3: new high speed USB device number 113 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 114 using dwc_otg | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 113 | |
usb 1-1.3: new high speed USB device number 118 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 119 using dwc_otg | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 118 | |
usb 1-1.3: new high speed USB device number 123 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 124 using dwc_otg | |
usb 1-1.3.2: New USB device found, idVendor=05ac, idProduct=0220 | |
usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
usb 1-1.3.2: Product: Apple Keyboard | |
usb 1-1.3.2: Manufacturer: Apple, Inc | |
usb 1-1.3.2: can't set config #1, error -71 | |
usb 1-1.3: USB disconnect, device number 123 | |
usb 1-1.3.2: USB disconnect, device number 124 | |
usb 1-1.3: new high speed USB device number 125 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 126 using dwc_otg | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 125 | |
usb 1-1.3: new high speed USB device number 6 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 7 using dwc_otg | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 6 | |
usb 1-1.3: new high speed USB device number 11 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 12 using dwc_otg | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 11 | |
usb 1-1.3: new high speed USB device number 16 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 17 using dwc_otg | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 16 | |
usb 1-1.3: new high speed USB device number 21 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 22 using dwc_otg | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 21 | |
usb 1-1.3: new high speed USB device number 26 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 27 using dwc_otg | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 26 | |
usb 1-1.3: new high speed USB device number 31 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: Keyboard Hub | |
usb 1-1.3: Manufacturer: Apple, Inc. | |
usb 1-1.3: SerialNumber: 000000000000 | |
hub 1-1.3:1.0: USB hub found | |
hub 1-1.3:1.0: 3 ports detected | |
usb 1-1.3.2: new low speed USB device number 32 using dwc_otg | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot reset port 2 (err = -71) | |
hub 1-1.3:1.0: Cannot enable port 2. Maybe the USB cable is bad? | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
hub 1-1.3:1.0: unable to enumerate USB device on port 2 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
hub 1-1.3:1.0: cannot disable port 2 (err = -71) | |
usb 1-1.3: USB disconnect, device number 31 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment