Skip to content

Instantly share code, notes, and snippets.

@tomari tomari/gist:3793102
Created Sep 27, 2012

Embed
What would you like to do?
NEC PC-9821V13/M7
eax in eax ebx ecx edx
00000000 00000001 756e6547 6c65746e 49656e69
00000001 0000052c 00000000 00000000 000001bf
Vendor ID: "GenuineIntel"; CPUID level 1
Intel-specific functions:
Version 0000052c:
Type 0 - Original OEM
Family 5 - Pentium
Model 2 - 75-200
Stepping 12
Reserved 0
Feature flags: 000001bf:
FPU Floating Point Unit
VME Virtual 8086 Mode Enhancements
DE Debugging Extensions
PSE Page Size Extensions
TSC Time Stamp Counter
MSR Model Specific Registers
MCE Machine Check Exception
CX8 COMPXCHG8B Instruction
00:00.0 Host bridge: VLSI Technology Inc 82C594-AFC2 (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16
00:06.0 Bridge: NEC Corporation PCI to 486-like bus Bridge (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.0 Display controller: NEC Corporation PCI to PC9800 Core-Graph Bridge (rev 01)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:08.0 VGA compatible controller: Trident Microsystems TGUI 9660/938x/968x (rev d3) (prog-if 00 [VGA controller])
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 0: Memory at 20000000 (32-bit, non-prefetchable)
Region 1: Memory at 20400000 (32-bit, non-prefetchable)
Expansion ROM at 21000000 [disabled]
00:0d.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 02)
Subsystem: Intel Corporation EtherExpress PRO/100B (TX)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 96 (2000ns min, 14000ns max)
Interrupt: pin A routed to IRQ 6
Region 0: Memory at 20410000 (32-bit, prefetchable)
Region 1: I/O ports at 6000
Region 2: Memory at 20500000 (32-bit, non-prefetchable)
Expansion ROM at 22000000 [disabled]
00:0e.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 96 (4250ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 6100
Region 1: Memory at 20411000 (32-bit, non-prefetchable)
Region 2: Memory at 20412000 (32-bit, non-prefetchable)
Expansion ROM at 23000000 [disabled]
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1994-2003 FreeBSD(98) porting team.
Copyright (c) 1992 A.Kojima F.Ukai M.Ishii (KMC).
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #0: Sat Feb 13 13:46:45 JST 2010
root@karnov.is.s.u-tokyo.ac.jp:/usr/obj/usr/src/sys/V13 pc98
Timecounter "i8254" frequency 2457600 Hz quality 0
CPU: Pentium/P54C (132.76-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 134217728 (128 MB)
avail memory = 120586240 (115 MB)
Intel Pentium detected, installing workaround for F00F bug
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 6.0 on pci0
isa0: <ISA bus> on isab0
vgapci0: <VGA-compatible display> at device 7.0 on pci0
vgapci1: <VGA-compatible display> mem 0x20000000-0x203fffff,0x20400000-0x2040ffff at device 8.0 on pci0
fxp0: <Intel 82557 Pro/100 Ethernet> port 0x6000-0x601f mem 0x20410000-0x20410fff,0x20500000-0x205fffff irq 6 at device 13.0 on pci0
fxp0: Enabling Rx lock-up workaround
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:a0:c9:93:84:45
fxp0: [ITHREAD]
sym0: <875> port 0x6100-0x61ff mem 0x20411000-0x204110ff,0x20412000-0x20412fff irq 10 at device 14.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
sym0: [ITHREAD]
cpu0 on motherboard
pnpbios: error 0/82 getting device count/size limit
gdc0: <Generic GDC> at port 0x60,0x62,0x64,0x66,0x68,0x6a,0x6c,0x6e,0xa0,0xa2,0xa4,0xa6,0xa8,0xaa,0xac,0xae,0x4a0,0x4a2,0x4a4,0x4a6,0x4a8,0x4aa,0x4ac,0x4ae,0x9a0,0x9a2,0x9a4,0x9a6,0x9a8,0x9aa,0x9ac,0x9ae,0x70,0x72,0x74,0x76,0x78,0x7a,0x7c,0x7e,0xa1,0xa3,0xa5,0xa7,0xa9,0xab,0xad,0xaf iomem 0xa0000-0xa4fff,0xa8000-0xbffff,0xe0000-0xe7fff on isa0
sc0: <System console> on isa0
sc0: PC-98x1 <16 virtual consoles, flags=0x200>
atacbus0 at port 0x640-0x64f,0x74c,0x432 irq 9 on isa0
atacbus0: [ITHREAD]
ata0: <ATA channel 0> at bank 0 on atacbus0
ata0: [ITHREAD]
ata1: <ATA channel 1> at bank 0 on atacbus0
ata1: [ITHREAD]
fdc0 at port 0x90,0x92,0x94,0xbe,0x4be irq 11 drq 2 on isa0
fdc0: [GIANT-LOCKED]
fdc0: [ITHREAD]
fd0: <1.44M FDD> on fdc0 drive 0
mse0: <Bus/InPort Mouse> at port 0x7fd9,0x7fdb,0x7fdd,0x7fdf irq 13 on isa0
mse0: [GIANT-LOCKED]
mse0: [ITHREAD]
olpt0 at port 0x40,0x42,0x44,0x46 on isa0
pckbd0: <PC-98 Keyboard> at port 0x41,0x43 irq 1 on isa0
kbd0 at pckbd0
pckbd0: [GIANT-LOCKED]
pckbd0: [ITHREAD]
pcm0: <CS4231A> at port 0xf40-0xf47 irq 12 drq 1 flags 0x10000 on isa0
drq/irq conf 22
pcm0: [GIANT-LOCKED]
pcm0: [ITHREAD]
pcrtc0: <PC Real Time Clock> on isa0
ppc0: <Parallel port> at port 0x140-0x147 irq 14 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart1: <16550 or compatible> at port 0x238-0x23f irq 5 on isa0
uart1: [FILTER]
Timecounter "TSC" frequency 132756219 Hz quality 800
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
acd0: CDROM <CD-ROM CDU111-NE/1.1f> at ata1-master PIO3 ???
da0 at sym0 bus 0 scbus0 target 0 lun 0
da0: <HITACHI DK329H-91WS AFAF> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15)
da0: 8781MB (17985430 512 byte sectors: 8H 128S/T 17562C)
Trying to mount root from ufs:/dev/da0s1a
fxp0: link state changed to UP
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.