Skip to content

Instantly share code, notes, and snippets.

@trojek

trojek/gist:c89e00721e8921f5adfe38e37106ed7a

Last active February 17, 2021 11:20
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save trojek/c89e00721e8921f5adfe38e37106ed7a to your computer and use it in GitHub Desktop.
Save trojek/c89e00721e8921f5adfe38e37106ed7a to your computer and use it in GitHub Desktop.
Download ZIP
dmesg Nvidia Jetson Nano (Intel 8265ac)
Raw
gistfile1.txt
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-4428) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Tue Oct 27 21:02:37 PDT 2020
[ 0.000000] Boot CPU: AArch64 Processor [411fd071]
[ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48,
[ 0.000000] OF: fdt: - 80000000 , 7ee00000
[ 0.000000] OF: fdt: - 100000000 , 7f200000
[ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
[ 0.000000] bootconsole [uart8250] enabled
[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
[ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout
[ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
[ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000
[ 0.000000] On node 0 totalpages: 1039872
[ 0.000000] DMA zone: 8192 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 519168 pages, LIFO batch:31
[ 0.000000] Normal zone: 8136 pages used for memmap
[ 0.000000] Normal zone: 520704 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefa3000 s61656 r8192 d32552 u102400
[ 0.000000] pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] CPU features: enabling workaround for ARM erratum 832075
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544
[ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
[ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes
[ 0.000000] log_buf_len min size: 32768 bytes
[ 0.000000] log_buf_len: 131072 bytes
[ 0.000000] early log buf free: 29340(89%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Memory: 3570192K/4159488K available (15294K kernel code, 2936K rwdata, 6644K rodata, 8576K init, 611K bss, 114160K reserved, 475136K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB)
[ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB)
[ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB)
[ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13e008 ( 2937 KB)
[ 0.000000] .bss : 0xffffff800a13e008 - 0xffffff800a1d6f7c ( 612 KB)
[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller
[ 0.000000] t210 clock and reset probe
[ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.001799] Console: colour dummy device 80x25
[ 0.001808] console [tty0] enabled
[ 0.001815] bootconsole [uart8250] disabled
[ 0.001831] kmemleak: Kernel memory leak detector disabled
[ 0.001850] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.001862] pid_max: default: 32768 minimum: 301
[ 0.002310] Security Framework initialized
[ 0.002533] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.002541] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.003649] ftrace: allocating 47119 entries in 185 pages
[ 0.171677] sched-energy: CPU device node has no sched-energy-costs
[ 0.171711] ASID allocator initialised with 65536 entries
[ 0.207970] tegra-id: chipid=22117.
[ 0.207983] tegra-id: opt_subrevision=0.
[ 0.208001] Tegra Speedo/IDDQ fuse revision 4
[ 0.208006] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2
[ 0.208010] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0
[ 0.208017] Tegra: CPU Speedo Value 2041, SoC Speedo Value 1944, GPU Speedo Value 2037
[ 0.208021] Tegra: CPU IDDQ Value 1892, SoC IDDQ Value 2152, GPU IDDQ Value 2525
[ 0.208040] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0
[ 0.208054] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts
[ 0.208061] DTB Build time: Oct 27 2020 21:08:18
[ 0.257056] CPU1: Booted secondary processor [411fd071]
[ 0.288952] CPU2: Booted secondary processor [411fd071]
[ 0.320939] CPU3: Booted secondary processor [411fd071]
[ 0.321031] Brought up 4 CPUs
[ 0.321038] SMP: Total of 4 processors activated.
[ 0.321046] CPU features: detected feature: 32-bit EL0 Support
[ 0.321310] CPU: All CPU(s) started at EL2
[ 0.321328] alternatives: patching kernel code
[ 0.329425] devtmpfs: initialized
[ 0.368583] Initilizing CustomIPI irq domain
[ 0.368979] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.369002] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.379500] pinctrl core: initialized pinctrl subsystem
[ 0.380069] OS set in device tree is not L4T.
[ 0.380504] regulator-dummy: no parameters
[ 0.380769] Initializing plugin-manager
[ 0.380936] Plugin module not found
[ 0.381165] node /plugin-manager/fragement@0 match with board >=3448-0000-100
[ 0.381686] node /plugin-manager/fragment@1 match with board >=3448-0000-101
[ 0.382531] node /plugin-manager/fragement@6 match with odm-data enable-tegra-wdt
[ 0.382908] node /plugin-manager/fragement@8 match with odm-data enable-tegra-wdt
[ 0.383460] node /plugin-manager/fragement@10 match with board >=3448-0000-300
[ 0.385425] node /plugin-manager/fragement@13 match with board >=3448-0000-300
[ 0.389151] NET: Registered protocol family 16
[ 0.390415] pstore: using zlib compression
[ 0.390454] console [pstore-1] enabled
[ 0.390460] pstore: Registered ramoops as persistent store backend
[ 0.390466] ramoops: attached 0x200000@0xb0000000, ecc: 0/0
[ 0.405067] cpuidle: using governor menu
[ 0.409378] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
[ 0.411156] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e64000)
[ 0.411178] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.413521] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
[ 0.416087] Serial: AMBA PL011 UART driver
[ 0.416585] tegra_powergate_init: DONE
[ 0.416600] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts
[ 0.416606] DTB Build time: Oct 27 2020 21:08:18
[ 0.418598] Tegra reboot handler registered.
[ 0.423232] iommu: Adding device tegra-carveouts to group 0
[ 0.423378] platform tegra-carveouts: domain=ffffffc0f94593d8 allocates as[0]=ffffffc0f94500a8
[ 0.423737] iommu: Adding device smmu_test to group 1
[ 0.423783] platform smmu_test: domain=ffffffc0f9459618 allocates as[0]=ffffffc0f9450110
[ 0.424611] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000
[ 0.424665] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000
[ 0.424720] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000
[ 0.424731] nv-tegra-mc 70019000.mc: No mssnvlink node
[ 0.424753] mc-err: mcerr ops are set to t21x
[ 0.434507] iommu: Adding device 70090000.xusb to group 2
[ 0.434789] iommu: Adding device 70006000.serial to group 3
[ 0.434857] platform 70006000.serial: domain=ffffffc0f94f1558 allocates as[0]=ffffffc0f9450178
[ 0.435281] iommu: Adding device 70006040.serial to group 4
[ 0.435553] iommu: Adding device 70006200.serial to group 5
[ 0.435777] iommu: Adding device sound to group 6
[ 0.435821] platform sound: domain=ffffffc0f94f1a98 allocates as[0]=ffffffc0f94501e0
[ 0.436364] iommu: Adding device 7000d400.spi to group 7
[ 0.436619] iommu: Adding device 7000d600.spi to group 8
[ 0.436891] iommu: Adding device 70410000.spi to group 9
[ 0.437376] iommu: Adding device 50000000.host1x to group 10
[ 0.437655] iommu: Adding device 54080000.vi to group 11
[ 0.438051] iommu: Adding device 54600000.isp to group 12
[ 0.438316] iommu: Adding device 54680000.isp to group 13
[ 0.438629] iommu: Adding device tegradc.0 to group 14
[ 0.438683] platform tegradc.0: domain=ffffffc0f94fc9d8 allocates as[0]=ffffffc0f9450248
[ 0.439194] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000)
[ 0.439512] iommu: Adding device tegradc.1 to group 15
[ 0.439559] platform tegradc.1: domain=ffffffc0f94fcc18 allocates as[0]=ffffffc0f94502b0
[ 0.440069] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000)
[ 0.440309] iommu: Adding device 54340000.vic to group 16
[ 0.440515] iommu: Adding device 544c0000.nvenc to group 17
[ 0.440714] iommu: Adding device 54500000.tsec to group 18
[ 0.440909] iommu: Adding device 54100000.tsecb to group 19
[ 0.441140] iommu: Adding device 54480000.nvdec to group 20
[ 0.441362] iommu: Adding device 54380000.nvjpg to group 21
[ 0.442418] iommu: Adding device 546c0000.i2c to group 22
[ 0.442749] iommu: Adding device 57000000.gpu to group 23
[ 0.442800] platform 57000000.gpu: domain=ffffffc0f9506c18 allocates as[0]=ffffffc0f9450318
[ 0.442835] platform 57000000.gpu: domain=ffffffc0f9506c18 allocates as[1]=ffffffc0f9450380
[ 0.442874] platform 57000000.gpu: domain=ffffffc0f9506c18 allocates as[2]=ffffffc0f94503e8
[ 0.442911] platform 57000000.gpu: domain=ffffffc0f9506c18 allocates as[3]=ffffffc0f9450450
[ 0.443790] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
[ 0.443800] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present
[ 0.443812] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET
[ 0.443817] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM
[ 0.443821] tegra-pmc: ### PMC reset status reg: 0x0
[ 0.493132] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
[ 0.493141] tegra-pmc: Clear bootloader IO dpd settings
[ 0.493160] tegra-pmc 7000e400.pmc: IO padctrl driver initialized
[ 0.493225] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands
[ 0.493511] iommu: Adding device 70012000.se to group 24
[ 0.494284] iommu: Adding device 7000c000.i2c to group 25
[ 0.494533] iommu: Adding device 7000c400.i2c to group 26
[ 0.494790] iommu: Adding device 7000c500.i2c to group 27
[ 0.495039] iommu: Adding device 7000c700.i2c to group 28
[ 0.495326] iommu: Adding device 7000d000.i2c to group 29
[ 0.495571] iommu: Adding device 7000d100.i2c to group 30
[ 0.495854] iommu: Adding device sdhci-tegra.0 to group 31
[ 0.495911] platform sdhci-tegra.0: domain=ffffffc0f959de58 allocates as[0]=ffffffc0f94504b8
[ 0.496737] iommu: Adding device 700d0000.xudc to group 32
[ 0.500093] vdd-ac-bat: 5000 mV
[ 0.500435] vdd-5v0-sys: 5000 mV
[ 0.501412] vdd-5v0-hdmi: supplied by vdd-5v0-sys
[ 0.501476] vdd-5v0-hdmi: 5000 mV
[ 0.501876] vdd-1v8-sys: 1800 mV
[ 0.502254] vdd-fan: supplied by vdd-5v0-sys
[ 0.502292] vdd-fan: 5000 mV
[ 0.502672] vdd-usb-vbus: supplied by vdd-5v0-sys
[ 0.502728] vdd-usb-vbus: 5000 mV
[ 0.503256] vdd-usb-vbus2: 5000 mV
[ 0.533837] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.536332] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip
[ 0.537457] GPIO line 151 (camera-control-output-low) hogged as output/low
[ 0.537479] GPIO line 152 (camera-control-output-low) hogged as output/low
[ 0.537514] GPIO line 6 (system-suspend-gpio) hogged as output/high
[ 0.537906] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio)
[ 0.545627] eventlib_kernel: keventlib is initialized, test id: 0
[ 0.545965] SCSI subsystem initialized
[ 0.546196] libata version 3.00 loaded.
[ 0.546472] usbcore: registered new interface driver usbfs
[ 0.546520] usbcore: registered new interface driver hub
[ 0.546597] usbcore: registered new device driver usb
[ 0.550661] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8
[ 0.557187] vdd-core: 600 <--> 1162 mV at 1125 mV
[ 0.558095] random: fast init done
[ 0.558214] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV
[ 0.561181] vdd-ddr-1v1: 1150 mV
[ 0.564235] vdd-pre-reg-1v35: 1350 mV
[ 0.568230] vdd-1v8: 1800 mV
[ 0.572234] avdd-sys-1v2: 1200 mV
[ 0.576231] vdd-pex-1v0: 1050 mV
[ 0.576869] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV
[ 0.577415] max77620-ldo3: at 3100 mV
[ 0.580234] vdd-rtc: 850 <--> 1100 mV at 1000 mV
[ 0.580817] max77620-ldo5: at 3100 mV
[ 0.584234] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV
[ 0.588231] avdd-1v05-pll: 1050 mV
[ 0.592230] avdd-io-hdmi-dp: 1050 mV
[ 0.594875] GPIO line 505 (spmic-default-output-high) hogged as output/high
[ 0.595157] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio)
[ 0.595436] max77620 4-003c: max77620 probe successful
[ 0.598075] media: Linux media interface: v0.10
[ 0.598135] Linux video capture interface: v2.00
[ 0.599046] pps_core: LinuxPPS API ver. 1 registered
[ 0.599053] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.599078] PTP clock support registered
[ 0.602355] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table
[ 0.603277] Advanced Linux Sound Architecture Driver Initialized.
[ 0.603915] Bluetooth: Core ver 2.22
[ 0.603957] NET: Registered protocol family 31
[ 0.603962] Bluetooth: HCI device and connection manager initialized
[ 0.603976] Bluetooth: HCI socket layer initialized
[ 0.603984] Bluetooth: L2CAP socket layer initialized
[ 0.604009] Bluetooth: SCO socket layer initialized
[ 0.605792] tegra210_dvfs: no clock found for sdmmc2_ddr
[ 0.605810] tegra210_dvfs: no clock found for sdmmc4_ddr
[ 0.605861] tegra210_dvfs: no clock found for sdmmc1_ddr
[ 0.605877] tegra210_dvfs: no clock found for sdmmc3_ddr
[ 0.609544] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe
[ 0.610844] vdd-3v3-sys: supplied by vdd-5v0-sys
[ 0.610909] vdd-3v3-sys: 3300 mV
[ 0.611196] vdd-1v8-sys: supplied by vdd-3v3-sys
[ 0.613041] vdd-usb-vbus2: supplied by vdd-3v3-sys
[ 0.613596] vdd-3v3-sd: supplied by vdd-3v3-sys
[ 0.613637] vdd-3v3-sd: 3300 mV
[ 0.614701] avdd-io-edp-1v05: supplied by avdd-1v05-pll
[ 0.614745] avdd-io-edp-1v05: 1050 mV
[ 0.615190] vdd-usb-hub-en: supplied by vdd-1v8-sys
[ 0.615250] vdd-usb-hub-en: 5000 mV
[ 0.616694] camchar: rtcpu character device driver loaded
[ 0.617604] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0
[ 0.618951] clocksource: Switched to clocksource arch_sys_counter
[ 0.659517] VFS: Disk quotas dquot_6.6.0
[ 0.659643] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.660119] nvmap_heap_init: nvmap_heap_init: created heap block cache
[ 0.660527] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000
[ 0.660544] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000)
[ 0.660731] cma: enabled page replacement for spfn=d7000, epfn=f0000
[ 0.660735] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful
[ 0.660746] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout
[ 0.660772] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048
[ 0.660778] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout
[ 0.660792] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways
[ 0.660801] nvmap_page_pool_init: Total RAM pages: 1011332
[ 0.660807] nvmap_page_pool_init: nvmap page pool size: 126416 pages (493 MB)
[ 0.660893] nvmap_background_zero_thread: PP zeroing thread starting.
[ 0.661366] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
[ 0.662285] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB)
[ 0.670793] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
[ 0.671303] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
[ 0.671679] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
[ 0.671958] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
[ 0.672134] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
[ 0.672410] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz
[ 0.672414] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB
[ 0.672840] NET: Registered protocol family 2
[ 0.673814] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.674026] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.674519] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.674670] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.674752] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.675219] NET: Registered protocol family 1
[ 0.675921] RPC: Registered named UNIX socket transport module.
[ 0.675926] RPC: Registered udp transport module.
[ 0.675929] RPC: Registered tcp transport module.
[ 0.675932] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.675946] PCI: CLS 0 bytes, default 64
[ 0.676179] Trying to unpack rootfs image as initramfs...
[ 0.907715] Freeing initrd memory: 5356K
[ 0.917685] host1x 50000000.host1x: initialized
[ 0.919555] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.922783] audit: initializing netlink subsys (disabled)
[ 0.922849] audit: type=2000 audit(0.771:1): initialized
[ 0.923637] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.933473] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.935106] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.935894] 9p: Installing v9fs 9p2000 file system support
[ 0.939060] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
[ 0.939205] io scheduler noop registered
[ 0.939531] io scheduler cfq registered (default)
[ 0.942169] gic 702f9000.agic: GIC IRQ controller registered
[ 0.945159] iommu: Adding device 702ef000.adsp to group 33
[ 0.954433] iommu: Adding device aconnect@702c0000:adsp_audio to group 34
[ 0.954585] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered
[ 0.955340] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x71c6c0e
[ 0.955350] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4
[ 0.956978] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb
[ 0.957089] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb
[ 0.957189] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb
[ 0.957377] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1
[ 0.957470] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4
[ 0.957555] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4
[ 0.957644] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4
[ 0.957730] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4
[ 0.957821] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb
[ 0.957912] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb
[ 0.964083] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops
[ 0.965803] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000
[ 0.967721] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration
[ 0.968999] tegra-pcie 1003000.pcie: PCIE: Enable power rails
[ 0.969350] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes
[ 0.970544] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
[ 0.970766] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000
[ 0.971165] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
[ 0.971314] Adding domain tsec-pd to PM domain host1x-pd
[ 0.974673] tsec 54500000.tsec: initialized
[ 0.976067] tsec 54100000.tsecb: initialized
[ 0.976781] Adding domain nvdec-pd to PM domain host1x-pd
[ 0.980329] nvdec 54480000.nvdec: initialized
[ 0.981412] Adding domain vic03-pd to PM domain host1x-pd
[ 0.981584] Adding domain msenc-pd to PM domain host1x-pd
[ 0.981741] Adding domain nvjpg-pd to PM domain host1x-pd
[ 0.985831] falcon 54340000.vic: initialized
[ 0.987020] falcon 544c0000.nvenc: initialized
[ 0.988345] falcon 54380000.nvjpg: initialized
[ 0.992851] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97
[ 0.992914] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1
[ 0.992928] tegra_cec 70015000.tegra_cec: Enable clock result: 0.
[ 0.992960] tegra_cec 70015000.tegra_cec: tegra_cec_init started
[ 0.992996] display board info: id 0x0, fab 0x0
[ 0.993055] generic_infoframe_type: 0x87
[ 0.993197] tegradc tegradc.0: DT parsed successfully
[ 0.993231] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0
[ 0.993236] tegra_cec 70015000.tegra_cec: probed
[ 0.993244] tegradc tegradc.0: Display dc.ffffff800ab80000 registered with id=0
[ 0.997052] tegradc tegradc.0: probed
[ 0.997789] Console: switching to colour frame buffer device 80x30
[ 0.997826] tegradc tegradc.0: fb registered
[ 0.999102] tegradc tegradc.1: disp1 connected to head1->/host1x/sor
[ 0.999183] tegradc tegradc.1: No lt-data, using default setting
[ 0.999211] tegradc tegradc.1: No hpd-gpio in DT
[ 0.999243] tegradc tegradc.1: DT parsed successfully
[ 0.999293] tegradc tegradc.1: Display dc.ffffff800ad00000 registered with id=1
[ 1.000819] tegradc tegradc.1: dpd enable lookup fail:-19
[ 1.001802] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
[ 1.507002] Host read timeout at address 545c00c4
[ 1.508231] tegradc tegradc.1: probed
[ 1.508637] tegradc tegradc.1: fb registered
[ 1.509859] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels
[ 1.510661] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled
[ 1.510669] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized
[ 1.510997] kfuse 7000fc00.kfuse: initialized
[ 1.511885] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
[ 1.511891] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
[ 1.511901] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
[ 1.511919] tegradc tegradc.1: blank - powerdown
[ 1.511946] extcon-disp-state extcon:disp-state: cable 44 state 0 already set.
[ 1.511951] Extcon DP: HPD disabled
[ 1.511956] hpd: hpd_switch 0
[ 1.511961] hpd: switching from state 0 (Reset) to state 1 (Check Plug)
[ 1.511970] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available
[ 1.511972] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
[ 1.511978] hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
[ 1.512785] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
[ 1.513727] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
[ 1.513738] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 1.513744] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
[ 1.513750] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
[ 1.513760] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.513801] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400
[ 1.513901] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.514146] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400
[ 1.514220] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.514403] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.514413] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.514570] pci 0000:01:00.0: [8086:24fd] type 00 class 0x028000
[ 1.514618] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 1.514848] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.516232] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now
[ 1.516246] vdd-cpu: 708 <--> 1322 mV at 708 mV
[ 1.516623] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed
[ 1.517867] vdd-gpu: applied init 1000000uV constraint
[ 1.517875] vdd-gpu: 708 <--> 1323 mV at 997 mV
[ 1.518229] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed
[ 1.521658] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.521749] No Device Node present for smmu client: serial8250 !!
[ 1.521760] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000)
[ 1.521807] iommu: Adding device serial8250 to group 35
[ 1.524128] console [ttyS0] disabled
[ 1.524194] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra
[ 1.531091] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.531314] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 1.531344] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 1.531375] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
[ 1.531398] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[ 1.531565] pci 0000:02:00.0: supports D1 D2
[ 1.531568] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.534444] console [ttyS0] enabled
[ 1.535502] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART
[ 1.535806] serial-tegra 70006200.serial: RX in PIO mode
[ 1.535908] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART
[ 1.536886] [drm] Initialized
[ 1.539104] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 1.539194] pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x130fffff]
[ 1.539202] pci 0000:00:02.0: BAR 14: assigned [mem 0x13100000-0x131fffff]
[ 1.539209] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.539221] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit]
[ 1.539249] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.539260] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff]
[ 1.539272] pci 0000:02:00.0: BAR 4: assigned [mem 0x13100000-0x13103fff 64bit]
[ 1.539292] pci 0000:02:00.0: BAR 2: assigned [mem 0x13104000-0x13104fff 64bit]
[ 1.539312] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff]
[ 1.539321] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 1.539326] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[ 1.539333] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff]
[ 1.539977] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 1.539986] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.539995] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
[ 1.540158] aer 0000:00:01.0:pcie002: service driver aer loaded
[ 1.540431] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.540437] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.540444] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
[ 1.540564] aer 0000:00:02.0:pcie002: service driver aer loaded
[ 1.547365] brd: module loaded
[ 1.552663] loop: module loaded
[ 1.552764] tegra_profiler: version: 1.141, samples/io: 48/28
[ 1.552872] tegra_profiler: auth: init
[ 1.554283] THERMAL EST: found 2 subdevs
[ 1.554292] THERMAL EST num_resources: 0
[ 1.554297] [THERMAL EST subdev 0]
[ 1.554303] [THERMAL EST subdev 1]
[ 1.554909] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est
[ 1.554913] THERMAL EST: thz register success.
[ 1.555123] THERMAL EST: end of probe, return err: 0
[ 1.556764] sd: No Scsi addr parsed to reserve index
[ 1.556847] hisi_sas: driver version v1.6
[ 1.562148] tegra-qspi 70410000.spi: Prod settings list not found
[ 1.563432] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes)
[ 1.563440] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0
[ 1.567421] libphy: Fixed MDIO Bus: probed
[ 1.569560] tun: Universal TUN/TAP device driver, 1.6
[ 1.569565] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.570711] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.570715] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.570814] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 1.570817] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.570907] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 1.570911] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.571060] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
[ 1.571064] Copyright(c) 1999 - 2017 Intel Corporation.
[ 1.572138] r8168 0000:02:00.0: enabling device (0000 -> 0003)
[ 1.572172] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
[ 1.586782] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node
[ 1.586919] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:ec:09:d7 from device tree
[ 1.587530] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 1.587583] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com>
This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 1.588179] PPP generic driver version 2.4.2
[ 1.588400] PPP BSD Compression module registered
[ 1.588406] PPP Deflate Compression module registered
[ 1.588450] PPP MPPE Compression module registered
[ 1.588456] NET: Registered protocol family 24
[ 1.588527] usbcore: registered new interface driver r8152
[ 1.588578] usbcore: registered new interface driver asix
[ 1.588635] usbcore: registered new interface driver ax88179_178a
[ 1.588671] usbcore: registered new interface driver cdc_ether
[ 1.588711] usbcore: registered new interface driver net1080
[ 1.588749] usbcore: registered new interface driver cdc_subset
[ 1.588786] usbcore: registered new interface driver zaurus
[ 1.588846] usbcore: registered new interface driver cdc_ncm
[ 1.589012] VFIO - User Level meta-driver version: 0.3
[ 1.590347] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.590376] ehci-pci: EHCI PCI platform driver
[ 1.590423] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.590436] ohci-pci: OHCI PCI platform driver
[ 1.590478] ohci-platform: OHCI generic platform driver
[ 1.593309] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP
[ 1.593921] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0
[ 1.595098] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f90f0000 id
[ 1.597337] usbcore: registered new interface driver uas
[ 1.597422] usbcore: registered new interface driver usb-storage
[ 1.597554] usbcore: registered new interface driver usbserial
[ 1.597959] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release
[ 1.598015] tegra-xusb 70090000.xusb: xHCI Host Controller
[ 1.598041] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1
[ 1.598802] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010
[ 1.598863] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000
[ 1.599204] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.599213] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.599219] usb usb1: Product: xHCI Host Controller
[ 1.599224] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd
[ 1.599229] usb usb1: SerialNumber: 70090000.xusb
[ 1.599919] hub 1-0:1.0: USB hub found
[ 1.599969] hub 1-0:1.0: 5 ports detected
[ 1.600614] tegra-xusb 70090000.xusb: xHCI Host Controller
[ 1.600626] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2
[ 1.600768] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.600869] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.600876] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.600882] usb usb2: Product: xHCI Host Controller
[ 1.600887] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd
[ 1.600892] usb usb2: SerialNumber: 70090000.xusb
[ 1.601427] hub 2-0:1.0: USB hub found
[ 1.601463] hub 2-0:1.0: 4 ports detected
[ 1.603207] tegra-xudc-new 700d0000.xudc: device count: 1
[ 1.604503] tegra-xudc-new 700d0000.xudc: USB charger detection disabled
[ 1.604516] tegra-xudc-new 700d0000.xudc: vbus state: 0
[ 1.604549] tegra-xudc-new 700d0000.xudc: entering ELPG
[ 1.604808] tegra-xudc-new 700d0000.xudc: entering ELPG done
[ 1.605482] mousedev: PS/2 mouse device common for all mice
[ 1.605606] usbcore: registered new interface driver xpad
[ 1.703043] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1
[ 1.703107] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2
[ 1.736692] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
[ 1.739248] rtc rtc1: alarm rtc device
[ 1.739271] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
[ 1.739303] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
[ 1.739964] i2c /dev entries driver
[ 1.742242] i2c i2c-6: Added multiplexed i2c bus 7
[ 1.742720] i2c i2c-6: Added multiplexed i2c bus 8
[ 1.742728] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter
[ 1.743736] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6
[ 1.768730] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6
[ 1.791996] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10
[ 1.792077] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121)
[ 1.799635] imx219 8-0010: board setup failed
[ 1.804092] imx219: probe of 8-0010 failed with error -121
[ 1.805329] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
[ 1.808552] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2
[ 1.808560] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4
[ 1.809013] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 1.809032] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC
[ 1.809043] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC
[ 1.809180] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 1.809191] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC
[ 1.809198] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC
[ 1.809379] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 1.809391] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC
[ 1.809397] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature
[ 1.809585] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19
[ 1.810387] tegra_aotag tegra-aotag: Registering sensor 0
[ 1.810444] tegra_aotag tegra-aotag: Invalid temp readout
[ 1.810470] tegra_aotag tegra-aotag: Invalid temp readout
[ 1.810488] tegra_aotag tegra-aotag: Bound to TZ : ID 0
[ 1.810497] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0
[ 1.811496] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 1.811517] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered
[ 1.811712] tegra_aotag tegra-aotag: Invalid temp readout
[ 1.811745] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered
[ 1.812143] parse_throttle_dt_data: Num cap clks = 6
[ 1.812149] parse_throttle_dt_data: clk=cclk_g type=2
[ 1.812164] parse_throttle_dt_data: clk=gpu type=4
[ 1.812189] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0
[ 1.812211] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0
[ 1.812234] parse_throttle_dt_data: clk=cap.throttle.sclk type=0
[ 1.812238] parse_throttle_dt_data: clk=emc type=3
[ 1.812684] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 1.812792] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 1.813012] tegra_throttle_probe: probe successful. #cdevs=4
[ 1.813867] FAN dev name: pwm-fan
[ 1.813956] FAN:gpio request success.
[ 1.814034] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255
[ 1.814347] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal
[ 1.814519] pwm_fan_driver pwm-fan: fan tach request irq success
[ 1.814529] pwm_fan_driver pwm-fan: tach period: 1000
[ 1.814630] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
[ 1.814636] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
[ 1.814641] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
[ 1.814647] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
[ 1.814652] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
[ 1.814657] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
[ 1.814661] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
[ 1.814667] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
[ 1.814672] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
[ 1.814678] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
[ 1.815515] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds.
[ 1.815856] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1)
[ 1.816777] device-mapper: uevent: version 1.0.3
[ 1.817265] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.822848] tegra210-cpufreq cpufreq: probe()...completed
[ 1.823610] sdhci: Secure Digital Host Controller Interface driver
[ 1.823612] sdhci: Copyright(c) Pierre Ossman
[ 1.823614] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.824103] sdhci-tegra sdhci-tegra.0: Got CD GPIO
[ 1.824444] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful
[ 1.824570] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300
[ 1.829172] tegra-se 70012000.se: tegra_se_probe: complete
[ 1.829679] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.830786] usbcore: registered new interface driver usbhid
[ 1.830788] usbhid: USB HID core driver
[ 1.832840] tegra21x_actmon 6000c800.actmon: in actmon_register()...
[ 1.833005] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all
[ 1.834863] nvpmodel: initialized successfully
[ 1.836025] usbcore: registered new interface driver snd-usb-audio
[ 1.836080] No Device Node present for smmu client: snd-soc-dummy !!
[ 1.836085] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
[ 1.836103] iommu: Adding device snd-soc-dummy to group 36
[ 1.841407] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0
[ 1.860281] OPE platform probe
[ 1.860366] OPE platform probe successful
[ 1.860619] OPE platform probe
[ 1.860700] OPE platform probe successful
[ 1.871187] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr
[ 1.883768] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok
[ 1.883892] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok
[ 1.884012] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok
[ 1.884129] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok
[ 1.884249] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok
[ 1.884367] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok
[ 1.884485] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok
[ 1.884605] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok
[ 1.884718] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok
[ 1.884838] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok
[ 1.896469] u32 classifier
[ 1.896471] Actions configured
[ 1.896541] Initializing XFRM netlink socket
[ 1.897239] NET: Registered protocol family 10
[ 1.897938] NET: Registered protocol family 17
[ 1.897949] NET: Registered protocol family 15
[ 1.898023] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.898071] Bluetooth: RFCOMM socket layer initialized
[ 1.898080] Bluetooth: RFCOMM ver 1.11
[ 1.898085] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.898090] Bluetooth: HIDP socket layer initialized
[ 1.898107] 9pnet: Installing 9P2000 support
[ 1.898144] Key type dns_resolver registered
[ 1.898508] Registered cp15_barrier emulation handler
[ 1.898515] Registered setend emulation handler
[ 1.899590] registered taskstats version 1
[ 1.900271] Adding domain ve2-pd to PM domain host1x-pd
[ 1.900508] Adding domain ve-pd to PM domain host1x-pd
[ 1.902590] isp 54600000.isp: initialized
[ 1.903544] isp 54680000.isp: initialized
[ 1.913833] last reset is due to power on reset
[ 1.913838] KERNEL: PMC reset status reg: 0x0
[ 1.913895] BL: PMC reset status reg: 0x0
[ 1.913898] BL: PMIC poweroff Event Recorder: 0x40
[ 1.915449] clk_cbus_recalc_rate: no gbus parent
[ 1.915455] clk_cbus_round_rate: no gbus parent
[ 1.915457] clk_cbus_round_rate: no gbus parent
[ 1.915463] clk_cbus_recalc_rate: no gbus parent
[ 1.915565] clk_cbus_recalc_rate: no gbus parent
[ 1.915568] clk_cbus_round_rate: no gbus parent
[ 1.915571] clk_cbus_round_rate: no gbus parent
[ 1.915575] clk_cbus_recalc_rate: no gbus parent
[ 1.916245] tegra_dvfs: GPU-cap: registered
[ 1.916301] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled
[ 1.916303] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled
[ 1.916306] tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV, scaling enabled
[ 1.917644] tegra_dvfs: vdd-gpu-vts: registered
[ 1.918300] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered
[ 1.918924] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered
[ 1.919529] input: gpio-keys as /devices/gpio-keys/input/input1
[ 1.930972] usb 1-2: new high-speed USB device number 2 using tegra-xusb
[ 1.952596] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:14 UTC (946688414)
[ 1.953646] vi 54080000.vi: vi_probe: ++
[ 1.956712] vi 54080000.vi: initialized
[ 1.958727] vi 54080000.vi: subdev nvcsi--2 bound
[ 1.958740] vi 54080000.vi: subdev imx219 7-0010 bound
[ 1.959688] vi 54080000.vi: subdev nvcsi--1 bound
[ 1.961380] Disable partitions left on by BL
[ 1.961384] disb
[ 1.961430] bwmgr: missing cdev-type property
[ 1.961551] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411
[ 1.961555] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.961559] usb 1-2: Product: 4-Port USB 2.1 Hub
[ 1.961562] usb 1-2: Manufacturer: Generic
[ 1.961807] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 1.961813] DRAM derating cdev registered.
[ 1.962606] hub 1-2:1.0: USB hub found
[ 1.963126] vdd-fan: disabling
[ 1.963129] vdd-usb-vbus: disabling
[ 1.963131] vdd-usb-vbus2: disabling
[ 1.963182] hub 1-2:1.0: 4 ports detected
[ 1.963229] vddio-sdmmc3-ap: disabling
[ 1.963309] avdd-io-edp-1v05: disabling
[ 1.963312] vdd-usb-hub-en: disabling
[ 1.963394] ALSA device list:
[ 1.963396] #0: tegra-hda at 0x70038000 irq 83
[ 1.963399] #1: tegra-snd-t210ref-mobile-rt565x
[ 1.967218] Freeing unused kernel memory: 8576K
[ 1.993518] Root device found: mmcblk0p1
[ 2.006975] tegra_cec 70015000.tegra_cec: Can't find physical addresse.
[ 2.006979] tegra_cec 70015000.tegra_cec: tegra_cec_init Done.
[ 2.073924] mmc0: Applying tuning correction
[ 2.073938] mmc0: Tap value after applying correction 58
[ 2.073955] mmc0: hw tuning done ...
[ 2.073987] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
[ 2.074415] mmcblk0: mmc0:aaaa SM32G 29.7 GiB
[ 2.079364] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
[ 2.082967] usb 1-3: new full-speed USB device number 3 using tegra-xusb
[ 2.104816] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b
[ 2.104821] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.197994] Found dev node: /dev/mmcblk0p1
[ 2.250964] usb 1-2.1: new full-speed USB device number 4 using tegra-xusb
[ 2.275606] usb 1-2.1: New USB device found, idVendor=1ffb, idProduct=00cb
[ 2.275610] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.275613] usb 1-2.1: Product: Pololu Tic 36v4
[ 2.275616] usb 1-2.1: Manufacturer: Pololu Corporation
[ 2.275618] usb 1-2.1: SerialNumber: 00314190
[ 2.354961] usb 1-2.2: new full-speed USB device number 5 using tegra-xusb
[ 2.379202] usb 1-2.2: New USB device found, idVendor=1ffb, idProduct=00cb
[ 2.379207] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.379211] usb 1-2.2: Product: Pololu Tic 36v4
[ 2.379214] usb 1-2.2: Manufacturer: Pololu Corporation
[ 2.379217] usb 1-2.2: SerialNumber: 00311444
[ 2.458961] usb 1-2.3: new full-speed USB device number 6 using tegra-xusb
[ 2.481740] usb 1-2.3: New USB device found, idVendor=24e0, idProduct=009f
[ 2.481747] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.481750] usb 1-2.3: Product: Yocto-Inclinometer
[ 2.481754] usb 1-2.3: Manufacturer: Yoctopuce
[ 2.481757] usb 1-2.3: SerialNumber: YCLINOM1-1729BA
[ 2.484169] hid-generic 0003:24E0:009F.0001: hidraw0: USB HID v1.11 Device [Yoctopuce Yocto-Inclinometer] on usb-70090000.xusb-2.3/input0
[ 2.562975] usb 1-2.4: new full-speed USB device number 7 using tegra-xusb
[ 2.585139] usb 1-2.4: New USB device found, idVendor=1fc9, idProduct=04d8
[ 2.585145] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.585148] usb 1-2.4: Product: Laserdock.
[ 2.585151] usb 1-2.4: Manufacturer: WICKED
[ 2.585154] usb 1-2.4: SerialNumber: E19FB0B000000335
[ 3.216382] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted
[ 3.216386] EXT4-fs (mmcblk0p1): recovery complete
[ 3.231080] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.231837] Rootfs mounted over mmcblk0p1
[ 3.248595] Switching from initrd to actual rootfs
[ 3.427803] systemd[1]: System time before build time, advancing clock.
[ 3.462991] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.475142] cgroup: cgroup2: unknown option "nsdelegate"
[ 3.492450] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.493241] systemd[1]: Detected architecture arm64.
[ 3.520198] systemd[1]: Set hostname to <SE4>.
[ 3.633986] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 3.633996] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 3.812422] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.812655] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.812753] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.812773] systemd[1]: Reached target User and Group Name Lookups.
[ 3.812796] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.814336] systemd[1]: Created slice User and Session Slice.
[ 3.815221] systemd[1]: Created slice System Slice.
[ 3.815477] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.904417] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[ 4.039084] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1)
[ 4.048271] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 4.048295] cpu-throttle-alert cooling device registered.
[ 4.048414] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 4.048429] gpu-throttle-alert cooling device registered.
[ 4.048578] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 4.048590] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 4.048605] hot-surface-alert cooling device registered.
[ 4.316466] systemd-journald[2016]: Received request to flush runtime journal from PID 1
[ 5.183936] Intel(R) Wireless WiFi driver for Linux
[ 5.183940] Copyright(c) 2003- 2015 Intel Corporation
[ 5.184165] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
[ 5.242027] random: crng init done
[ 5.245433] random: 7 urandom warning(s) missed due to ratelimiting
[ 5.320165] using random self ethernet address
[ 5.324657] using random host ethernet address
[ 5.697692] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2
[ 5.707801] iwlwifi 0000:01:00.0: Falling back to user helper
[ 5.770969] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0
[ 5.770976] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0
[ 6.095402] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb
[ 6.123866] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411
[ 6.123873] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.123876] usb 2-1: Product: 4-Port USB 3.1 Hub
[ 6.123880] usb 2-1: Manufacturer: Generic
[ 6.127742] hub 2-1:1.0: USB hub found
[ 6.128536] hub 2-1:1.0: 4 ports detected
[ 6.135545] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2
[ 6.144902] iwlwifi 0000:01:00.0: Falling back to user helper
[ 6.164626] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2
[ 6.174072] iwlwifi 0000:01:00.0: Falling back to user helper
[ 6.243869] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2
[ 6.253711] iwlwifi 0000:01:00.0: Falling back to user helper
[ 6.279015] usb 2-1: usb_suspend_both: status 0
[ 6.279205] usb usb2: usb_suspend_both: status 0
[ 6.529231] iwlwifi 0000:01:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm
[ 6.606303] usbcore: registered new interface driver btusb
[ 6.609088] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[ 6.611363] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 6.612479] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 6.614551] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[ 6.615443] Bluetooth: hci0: Device revision is 16
[ 6.615448] Bluetooth: hci0: Secure boot is enabled
[ 6.615450] Bluetooth: hci0: OTP lock is enabled
[ 6.615453] Bluetooth: hci0: API lock is enabled
[ 6.615455] Bluetooth: hci0: Debug lock is disabled
[ 6.615458] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 6.668563] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[ 6.734194] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 6.735621] thermal thermal_zone6: failed to read out thermal zone (-5)
[ 6.742646] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type iwlwifi
[ 6.868763] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.868775] Bluetooth: BNEP socket layer initialized
[ 7.473186] Mass Storage Function, version: 2009/09/11
[ 7.473192] LUN: removable file: (no medium)
[ 7.478495] using random self ethernet address
[ 7.483025] using random host ethernet address
[ 7.567277] rndis0: HOST MAC f6:3a:2b:6c:f2:b4
[ 7.567644] rndis0: MAC f6:3a:2b:6c:f2:b5
[ 7.570248] usb0: HOST MAC f6:3a:2b:6c:f2:b6
[ 7.570280] usb0: MAC f6:3a:2b:6c:f2:b7
[ 7.570302] tegra-xudc-new 700d0000.xudc: exiting ELPG
[ 7.571140] tegra-xudc-new 700d0000.xudc: exiting ELPG done
[ 7.571157] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled
[ 7.571188] tegra-xudc-new 700d0000.xudc: entering ELPG
[ 7.571427] tegra-xudc-new 700d0000.xudc: entering ELPG done
[ 7.571443] tegra-xudc-new 700d0000.xudc: exiting ELPG
[ 7.571960] tegra-xudc-new 700d0000.xudc: exiting ELPG done
[ 7.571984] tegra-xudc-new 700d0000.xudc: entering ELPG
[ 7.572218] tegra-xudc-new 700d0000.xudc: entering ELPG done
[ 7.582152] l4tbr0: port 1(rndis0) entered blocking state
[ 7.582157] l4tbr0: port 1(rndis0) entered disabled state
[ 7.583425] device rndis0 entered promiscuous mode
[ 7.592197] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
[ 7.598184] l4tbr0: port 2(usb0) entered blocking state
[ 7.598190] l4tbr0: port 2(usb0) entered disabled state
[ 7.598357] device usb0 entered promiscuous mode
[ 7.605249] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 7.733282] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.734369] eth0: 0xffffff800a35e000, 00:04:4b:ec:09:d7, IRQ 406
[ 7.794289] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.850829] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.853388] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 7.853960] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 7.971178] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 7.971796] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 8.040289] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.111682] zram: Added device: zram0
[ 8.114794] zram: Added device: zram1
[ 8.117745] zram: Added device: zram2
[ 8.120454] zram: Added device: zram3
[ 8.157553] zram0: detected capacity change from 0 to 519585792
[ 8.174776] Bluetooth: hci0: Waiting for firmware download to complete
[ 8.175403] Bluetooth: hci0: Firmware loaded in 1532379 usecs
[ 8.175509] Bluetooth: hci0: Waiting for device to boot
[ 8.187447] Bluetooth: hci0: Device booted in 11712 usecs
[ 8.187743] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.189057] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[ 8.191451] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 8.234161] Adding 507404k swap on /dev/zram0. Priority:5 extents:1 across:507404k SS
[ 8.237864] zram1: detected capacity change from 0 to 519585792
[ 8.255198] Adding 507404k swap on /dev/zram1. Priority:5 extents:1 across:507404k SS
[ 8.262043] zram2: detected capacity change from 0 to 519585792
[ 8.281590] Adding 507404k swap on /dev/zram2. Priority:5 extents:1 across:507404k SS
[ 8.285338] zram3: detected capacity change from 0 to 519585792
[ 8.305357] Adding 507404k swap on /dev/zram3. Priority:5 extents:1 across:507404k SS
[ 9.731285] tegradc tegradc.0: blank - powerdown
[ 9.731294] tegradc tegradc.1: blank - powerdown
[ 11.642705] wlan0: authenticate with 48:8f:5a:21:a6:0d
[ 11.651632] wlan0: send auth to 48:8f:5a:21:a6:0d (try 1/3)
[ 11.656077] wlan0: authenticated
[ 11.656430] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 11.656435] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 11.658997] wlan0: associate with 48:8f:5a:21:a6:0d (try 1/3)
[ 11.660155] wlan0: RX AssocResp from 48:8f:5a:21:a6:0d (capab=0x431 status=0 aid=2)
[ 11.662264] wlan0: associated
[ 11.667690] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment