ts-sz

#/bin/bash -xe

systemctl stop pvestatd.service
systemctl stop pvedaemon.service
systemctl stop pve-cluster.service
systemctl stop corosync
systemctl stop pve-cluster

sqlite3 /var/lib/pve-cluster/config.db "delete from tree where name = 'corosync.conf';"

gushmazuko

Proxmox VE Installation on Hetzner Server via Rescue System

Follow these steps to install Proxmox VE on a Hetzner server via the Rescue System. The Rescue System is a Linux-based environment that can be booted into to perform system recovery tasks. We'll be using it to install Proxmox VE.

In order to complete the process, it is indeed necessary to first boot into the Rescue System and then connect to it via SSH. This will allow you to run the commands for installing Proxmox VE. Here are the steps:

Starting the Rescue System

1. Log into the Hetzner Robot.
2. Under "Main Functions; Server" select the desired server and then open the tab "Rescue".

pierew

OLDNAME=$(hostname)
hostnamectl set-hostname ${1}
mkdir -p /etc/pve/nodes/${1}
cp -a /etc/pve/nodes/${OLDNAME} /etc/pve/nodes/${1}
echo 'A reboot is required, Exit with CTRL-C'
read

pamolloy

Wireguard + VXLAN demo

Scripts to confgire a group of hosts on a LAN to use VXLAN over Wireguard.

Wireguard routing

• Making your own private Internet
• VXLAN & Linux
• Bridge vs Macvlan
• iproute2 bridging

rjmoggach

#!/usr/bin/env bash

DEFAULT_FAN=65
DEFAULT_MEM=1500
DEFAULT_GPU=150
DEFAULT_POW=200
echo "Setting up ${GPU_COUNT} GPU(s)..."


GPU_COUNT="$(nvidia-smi -L | wc -l)"

voluntas

### KERNEL TUNING ###

# Increase size of file handles and inode cache
fs.file-max = 2097152

# Do less swapping
vm.swappiness = 10
vm.dirty_ratio = 60
vm.dirty_background_ratio = 2

ValdikSS

Huawei E5885 current firmware backup manual.

1. Download modified usbloader, which will copy proper busybox into /system/busybox and enable telnetd on your device (will add additional line into /system/autorun.sh). Use it only on E5885, not on other device!
2. Load it using balong-usbdload. Refer to this disassembling manual.
3. After loading, wait about one minute, disconnect device from the computer and power off the device holding power button for ~15 seconds.
4. Insert MicroSD card to the device and power it on.
5. telnet 192.168.8.1 2323

/system/busybox sh

Luzifer

Running docker-compose as a systemd service

Files

File	Purpose
/etc/compose/docker-compose.yml	Compose file describing what to deploy
/etc/systemd/system/docker-compose-reload.service	Executing unit to trigger reload on docker-compose.service
/etc/systemd/system/docker-compose-reload.timer	Timer unit to plan the reloads
/etc/systemd/system/docker-compose.service	Service unit to start and manage docker compose

sbonfert

#!/bin/sh
#
#  Read-only Root-FS for Raspian
#
#  Modified 2016 by Stefan Bonfert to make it compatible with Raspbian
#  Jessie (vanilla).
#
#  Modified 2015 by Pascal Rosin to work on raspian-ua-netinst with
#  overlayfs integrated in Linux Kernel >= 3.18.
#

Lewiscowles1986

#!/bin/bash
#
# This version uses September 2017 august stretch image, please use this image
#

if [ "$EUID" -ne 0 ]
	then echo "Must be root"
	exit
fi