Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
= New Index: 00:00:00:00:00:00 (Primary,UART,hci1) [hci1] 174.992702
= Open Index: 00:00:00:00:00:00 [hci1] 174.992728
< HCI Command: Reset (0x03|0x0003) plen 0 #1 [hci1] 174.993168
> HCI Event: Command Complete (0x0e) plen 4 #2 [hci1] 174.994740
Reset (0x03|0x0003) ncmd 1
Status: Success (0x00)
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 #3 [hci1] 174.994768
> HCI Event: Command Complete (0x0e) plen 12 #4 [hci1] 174.995716
Read Local Supported Features (0x04|0x0003) ncmd 1
Status: Success (0x00)
Features: 0x00 0x00 0x00 0x00 0x60 0x00 0x00 0x00
BR/EDR Not Supported
LE Supported (Controller)
< HCI Command: Read Local Version Informat.. (0x04|0x0001) plen 0 #5 [hci1] 174.995755
> HCI Event: Command Complete (0x0e) plen 12 #6 [hci1] 174.996734
Read Local Version Information (0x04|0x0001) ncmd 1
Status: Success (0x00)
HCI version: Reserved (0x0b) - Revision 0 (0x0000)
LMP version: Reserved (0x0b) - Subversion 65535 (0xffff)
Manufacturer: The Linux Foundation (1521)
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 #7 [hci1] 174.996756
> HCI Event: Command Complete (0x0e) plen 10 #8 [hci1] 174.997705
Read BD ADDR (0x04|0x0009) ncmd 1
Status: Success (0x00)
Address: 00:00:00:00:00:00 (OUI 00-00-00)
< HCI Command: LE Read Buffer Size (0x08|0x0002) plen 0 #9 [hci1] 174.997782
> HCI Event: Command Complete (0x0e) plen 7 #10 [hci1] 174.998721
LE Read Buffer Size (0x08|0x0002) ncmd 1
Status: Success (0x00)
Data packet length: 27
Num data packets: 7
< HCI Command: LE Read Local Supported Fe.. (0x08|0x0003) plen 0 #11 [hci1] 174.998737
> HCI Event: Command Complete (0x0e) plen 12 #12 [hci1] 174.999704
LE Read Local Supported Features (0x08|0x0003) ncmd 1
Status: Success (0x00)
Features: 0xff 0x41 0x01 0x00 0x00 0x00 0x00 0x00
LE Encryption
Connection Parameter Request Procedure
Extended Reject Indication
Slave-initiated Features Exchange
LE Ping
LE Data Packet Length Extension
LL Privacy
Extended Scanner Filter Policies
LE 2M PHY
Channel Selection Algorithm #2
Minimum Number of Used Channels Procedure
< HCI Command: LE Read Supported States (0x08|0x001c) plen 0 #13 [hci1] 174.999722
> HCI Event: Command Complete (0x0e) plen 12 #14 [hci1] 175.000745
LE Read Supported States (0x08|0x001c) ncmd 1
Status: Success (0x00)
States: 0x000003ffff3fffff
Non-connectable Advertising State
Scannable Advertising State
Connectable Advertising State
High Duty Cycle Directed Advertising State
Passive Scanning State
Active Scanning State
Initiating State
and Connection State (Master Role)
Connection State (Slave Role)
Non-connectable Advertising State
and Passive Scanning State
Scannable Advertising State
and Passive Scanning State
Connectable Advertising State
and Passive Scanning State
High Duty Cycle Directed Advertising State
and Passive Scanning State
Non-connectable Advertising State
and Active Scanning State
Scannable Advertising State
and Active Scanning State
Connectable Advertising State
and Active Scanning State
High Duty Cycle Directed Advertising State
and Active Scanning State
Non-connectable Advertising State
and Initiating State
Scannable Advertising State
and Initiating State
Non-connectable Advertising State
and Connection State (Master Role)
Scannable Advertising State
and Connection State (Master Role)
Non-connectable Advertising State
and Connection State (Slave Role)
Scannable Advertising State
and Connection State (Slave Role)
Passive Scanning State
and Connection State (Master Role)
Active Scanning State
and Connection State (Master Role)
Passive Scanning State
and Connection State (Slave Role)
Active Scanning State
and Connection State (Slave Role)
Initiating State
and Connection State (Master Role)
and Master Role & Master Role
Low Duty Cycle Directed Advertising State
Low Duty Cycle Directed Advertising State
and Passive Scanning State
Low Duty Cycle Directed Advertising State
and Active Scanning State
Connectable Advertising State
and Initiating State
and Master Role & Slave Role
High Duty Cycle Directed Advertising State
and Initiating State
and Master Role & Slave Role
Low Duty Cycle Directed Advertising State
and Initiating State
and Master Role & Slave Role
Connectable Advertising State
and Connection State (Master Role)
and Master Role & Slave Role
High Duty Cycle Directed Advertising State
and Connection State (Master Role)
and Master Role & Slave Role
Low Duty Cycle Directed Advertising State
and Connection State (Master Role)
and Master Role & Slave Role
Connectable Advertising State
and Connection State (Slave Role)
and Master Role & Slave Role
High Duty Cycle Directed Advertising State
and Connection State (Slave Role)
and Slave Role & Slave Role
Low Duty Cycle Directed Advertising State
and Connection State (Slave Role)
and Slave Role & Slave Role
Initiating State
and Connection State (Slave Role)
and Master Role & Slave Role
< HCI Command: Read Local Supported Comma.. (0x04|0x0002) plen 0 #15 [hci1] 175.000805
> HCI Event: Command Complete (0x0e) plen 68 #16 [hci1] 175.003064
Read Local Supported Commands (0x04|0x0002) ncmd 1
Status: Success (0x00)
Commands: 66 entries
Disconnect (Octet 0 - Bit 5)
Read Remote Version Information (Octet 2 - Bit 7)
Set Event Mask (Octet 5 - Bit 6)
Reset (Octet 5 - Bit 7)
Read Transmit Power Level (Octet 10 - Bit 2)
Set Controller To Host Flow Control (Octet 10 - Bit 5)
Host Buffer Size (Octet 10 - Bit 6)
Host Number of Completed Packets (Octet 10 - Bit 7)
Read Local Version Information (Octet 14 - Bit 3)
Read Local Supported Features (Octet 14 - Bit 5)
Read BD ADDR (Octet 15 - Bit 1)
Read RSSI (Octet 15 - Bit 5)
Set Event Mask Page 2 (Octet 22 - Bit 2)
LE Set Event Mask (Octet 25 - Bit 0)
LE Read Buffer Size (Octet 25 - Bit 1)
LE Read Local Supported Features (Octet 25 - Bit 2)
LE Set Random Address (Octet 25 - Bit 4)
LE Set Advertising Parameters (Octet 25 - Bit 5)
LE Read Advertising Channel TX Power (Octet 25 - Bit 6)
LE Set Advertising Data (Octet 25 - Bit 7)
LE Set Scan Response Data (Octet 26 - Bit 0)
LE Set Advertise Enable (Octet 26 - Bit 1)
LE Set Scan Parameters (Octet 26 - Bit 2)
LE Set Scan Enable (Octet 26 - Bit 3)
LE Create Connection (Octet 26 - Bit 4)
LE Create Connection Cancel (Octet 26 - Bit 5)
LE Read White List Size (Octet 26 - Bit 6)
LE Clear White List (Octet 26 - Bit 7)
LE Add Device To White List (Octet 27 - Bit 0)
LE Remove Device From White List (Octet 27 - Bit 1)
LE Connection Update (Octet 27 - Bit 2)
LE Set Host Channel Classification (Octet 27 - Bit 3)
LE Read Channel Map (Octet 27 - Bit 4)
LE Read Remote Used Features (Octet 27 - Bit 5)
LE Encrypt (Octet 27 - Bit 6)
LE Rand (Octet 27 - Bit 7)
LE Start Encryption (Octet 28 - Bit 0)
LE Long Term Key Request Reply (Octet 28 - Bit 1)
LE Long Term Key Request Neg Reply (Octet 28 - Bit 2)
LE Read Supported States (Octet 28 - Bit 3)
LE Receiver Test (Octet 28 - Bit 4)
LE Transmitter Test (Octet 28 - Bit 5)
LE Test End (Octet 28 - Bit 6)
Read Authenticated Payload Timeout (Octet 32 - Bit 4)
Write Authenticated Payload Timeout (Octet 32 - Bit 5)
LE Remote Connection Parameter Request Reply (Octet 33 - Bit 4)
LE Remote Connection Parameter Request Negative Reply (Octet 33 - Bit 5)
LE Set Data Length (Octet 33 - Bit 6)
LE Read Suggested Default Data Length (Octet 33 - Bit 7)
LE Write Suggested Default Data Length (Octet 34 - Bit 0)
LE Add Device To Resolving List (Octet 34 - Bit 3)
LE Remove Device From Resolving List (Octet 34 - Bit 4)
LE Clear Resolving List (Octet 34 - Bit 5)
LE Read Resolving List Size (Octet 34 - Bit 6)
LE Read Peer Resolvable Address (Octet 34 - Bit 7)
LE Read Local Resolvable Address (Octet 35 - Bit 0)
LE Set Address Resolution Enable (Octet 35 - Bit 1)
LE Set Resolvable Private Address Timeout (Octet 35 - Bit 2)
LE Read Maximum Data Length (Octet 35 - Bit 3)
LE Read PHY (Octet 35 - Bit 4)
LE Set Default PHY (Octet 35 - Bit 5)
LE Set PHY (Octet 35 - Bit 6)
LE Enhanced Receiver Test (Octet 35 - Bit 7)
LE Enhanced Transmitter Test (Octet 36 - Bit 0)
LE Read Transmit Power (Octet 38 - Bit 7)
LE Set Privacy Mode (Octet 39 - Bit 2)
< HCI Command: Set Event Mask (0x03|0x0001) plen 8 #17 [hci1] 175.003083
Mask: 0x200080000204e890
Disconnection Complete
Encryption Change
Read Remote Version Information Complete
Command Complete
Command Status
Hardware Error
Number of Completed Packets
Data Buffer Overflow
Encryption Key Refresh Complete
LE Meta
< HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 #18 [hci1] 177.027303
Mask: 0x0000000000080e7f
LE Connection Complete
LE Advertising Report
LE Connection Update Complete
LE Read Remote Used Features Complete
LE Long Term Key Request
LE Remote Connection Parameter Request
LE Data Length Change
LE Enhanced Connection Complete
LE Direct Advertising Report
LE PHY Update Complete
LE Channel Selection Algorithm
< HCI Command: LE Read Advertising Channe.. (0x08|0x0007) plen 0 #19 [hci1] 179.043321
< HCI Command: LE Read Transmit Power (0x08|0x004b) plen 0 #20 [hci1] 181.059389
< HCI Command: LE Read White List Size (0x08|0x000f) plen 0 #21 [hci1] 183.075420
= Close Index: 00:00:00:00:00:00 [hci1] 185.027321
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment