Below are my build instructions for GnuPG 2.2.10, released on August 30th, 2018. These instructions are built for a headless Ubuntu 18.04 LTS server (and have also been tested on Ubuntu 14.04/16.04).
If you prefer, you may use the below install script to install GnuPG 2.2.x by running the following commands:
curl -OL "https://gist.githubusercontent.com/vt0r/a2f8c0bcb1400131ff51/raw/e0d2011d7b89bfe5b83c3f29f21949fb21354dd9/install-gnupg22.sh" && sudo -H bash ./install-gnupg22.sh
apt-get -y install libgnutls-dev bzip2 make gettext texinfo gnutls-bin build-essential libbz2-dev zlib1g-dev libncurses5-dev libsqlite3-dev libldap2-dev || apt-get -y install libgnutls28-dev bzip2 make gettext texinfo gnutls-bin build-essential libbz2-dev zlib1g-dev libncurses5-dev libsqlite3-dev libldap2-dev
NOTE: To clean up from the older GnuPG 2.1.x builds, you probably want to delete /var/src/gnupg21
entirely.
mkdir -p /var/src/gnupg22 && cd /var/src/gnupg22
gpg --list-keys
gpg --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 249B39D24F25E3B6 04376F3EE0856959 2071B08A33BD3F06 8A861B1C7EFD60D9
wget -c https://www.gnupg.org/ftp/gcrypt/libgpg-error/libgpg-error-1.32.tar.gz && \
wget -c https://www.gnupg.org/ftp/gcrypt/libgpg-error/libgpg-error-1.32.tar.gz.sig && \
gpg --verify libgpg-error-1.32.tar.gz.sig && tar -xzf libgpg-error-1.32.tar.gz && \
cd libgpg-error-1.32/ && ./configure && make && make install && cd ../
wget -c https://www.gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-1.8.3.tar.gz && \
wget -c https://www.gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-1.8.3.tar.gz.sig && \
gpg --verify libgcrypt-1.8.3.tar.gz.sig && tar -xzf libgcrypt-1.8.3.tar.gz && \
cd libgcrypt-1.8.3 && ./configure && make && make install && cd ../
wget -c https://www.gnupg.org/ftp/gcrypt/libassuan/libassuan-2.5.1.tar.bz2 && \
wget -c https://www.gnupg.org/ftp/gcrypt/libassuan/libassuan-2.5.1.tar.bz2.sig && \
gpg --verify libassuan-2.5.1.tar.bz2.sig && tar -xjf libassuan-2.5.1.tar.bz2 && \
cd libassuan-2.5.1 && ./configure && make && make install && cd ../
wget -c https://www.gnupg.org/ftp/gcrypt/libksba/libksba-1.3.5.tar.bz2 && \
wget -c https://www.gnupg.org/ftp/gcrypt/libksba/libksba-1.3.5.tar.bz2.sig && \
gpg --verify libksba-1.3.5.tar.bz2.sig && tar -xjf libksba-1.3.5.tar.bz2 && \
cd libksba-1.3.5 && ./configure && make && make install && cd ../
wget -c https://www.gnupg.org/ftp/gcrypt/npth/npth-1.6.tar.bz2 && \
wget -c https://www.gnupg.org/ftp/gcrypt/npth/npth-1.6.tar.bz2.sig && \
gpg --verify npth-1.6.tar.bz2.sig && tar -xjf npth-1.6.tar.bz2 && \
cd npth-1.6 && ./configure && make && make install && cd ../
wget -c https://www.gnupg.org/ftp/gcrypt/pinentry/pinentry-1.1.0.tar.bz2 && \
wget -c https://www.gnupg.org/ftp/gcrypt/pinentry/pinentry-1.1.0.tar.bz2.sig && \
gpg --verify pinentry-1.1.0.tar.bz2.sig && tar -xjf pinentry-1.1.0.tar.bz2 && \
cd pinentry-1.1.0 && ./configure --enable-pinentry-curses --disable-pinentry-qt4 && \
make && make install && cd ../
wget -c https://www.gnupg.org/ftp/gcrypt/gnupg/gnupg-2.2.10.tar.bz2 && \
wget -c https://www.gnupg.org/ftp/gcrypt/gnupg/gnupg-2.2.10.tar.bz2.sig && \
gpg --verify gnupg-2.2.10.tar.bz2.sig && tar -xjf gnupg-2.2.10.tar.bz2 && \
cd gnupg-2.2.10 && ./configure && make && make install
echo "/usr/local/lib" > /etc/ld.so.conf.d/gpg2.conf && ldconfig -v
Thanks, running the 2.2.2 install now on a Lubuntu 16.04.3 LTS with 4.4.0-66. Usually runs without a hitch. Also this time.
One noteworthy thing, though. 2.2.2 installs as gpg and not gpg2. So if you have previous installs of GPG Modern they will still be around as gpg2. Also, I assume this means it will overwrite previous non-Modern local versions of GPG.