Instantly share code, notes, and snippets.

Embed
What would you like to do?
手順: http://tsuchinoko.dmmlabs.com/?p=3237
ONIE: eth0: link down. Skipping configuration.
ONIE: Failed to configure eth0 interface
ONIE: Starting ONIE Service Discovery
Info: Sleeping for 20 seconds
4..3..2..1..Info: eth0: Checking link... scsi 2:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 6
sd 2:0:0:0: [sdb] 15228928 512-byte logical blocks: (7.79 GB/7.26 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] Attached SCSI removable disk
ONIE:/ # down.
ONIE: eth0: link down. Skipping configuration.
ONIE: Failed to configure eth0 interface
ONIE: Starting ONIE Service Discovery
ONIE: Executing installer: file://dev/sdb1/onie-installer
Verifying image checksum ... OK.
Preparing image archive ... OK.
ONIE Installer: platform: x86_64-generic-r0
Partition #1 is in use.
Partition #2 is in use.
Partition #3 is in use.
Partition #4 is available
Creating new ACS-OS partition /dev/sda4 ...
Could not create partition 4 from 882688 to 67991551
Unable to set partition 4's name to 'ACS-OS-e39d3b8'!
Error encountered; not saving changes.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
mke2fs 1.42.8 (20-Jun-2013)
Filesystem label=ACS-OS-e39d3b8
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
950272 inodes, 3799313 blocks
189965 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=3892314112
116 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208
Allocating group tables: 0/116 done
Writing inode tables: 0/116 done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: 0/116 done
Archive: fs.zip
creating: boot/
inflating: boot/initrd.img-3.16.0-4-amd64
inflating: boot/vmlinuz-3.16.0-4-amd64
inflating: boot/System.map-3.16.0-4-amd64
inflating: boot/config-3.16.0-4-amd64
creating: var/lib/docker/
creating: var/lib/docker/tmp/
creating: var/lib/docker/volumes/
creating: var/lib/docker/trust/
creating: var/lib/docker/network/
creating: var/lib/docker/network/files/
inflating: var/lib/docker/network/files/local-kv.db
creating: var/lib/docker/aufs/
creating: var/lib/docker/aufs/mnt/
creating: var/lib/docker/aufs/diff/
creating: var/lib/docker/aufs/layers/
creating: var/lib/docker/containers/
creating: var/lib/docker/image/
creating: var/lib/docker/image/aufs/
creating: var/lib/docker/image/aufs/distribution/
creating: var/lib/docker/image/aufs/imagedb/
creating: var/lib/docker/image/aufs/imagedb/metadata/
creating: var/lib/docker/image/aufs/imagedb/metadata/sha256/
creating: var/lib/docker/image/aufs/imagedb/content/
creating: var/lib/docker/image/aufs/imagedb/content/sha256/
inflating: var/lib/docker/image/aufs/repositories.json
creating: var/lib/docker/image/aufs/layerdb/
inflating: fs.squashfs
Success: Support tarball created: /tmp/onie-support.tar.bz2
Installing for i386-pc platform.
Installation finished. No error reported.
umount: can't remount rootfs read-only
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL tosd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
Restarting system.
machine restart
BIOS (Dell Inc) Boot Selector
S6000-ON (SI) 3.20.0.3 (32-port TE/FG)
POST Configuration
CPU Signature 30669
CPU FamilyID=6, Model=36, SteppingId=9, Processor=0
Microcode Revision 10b
POST Control=0xea000303, Status=0xe6009f00
MSRs:
Platform ID: f09884d08f
PMG_CST_CFG_CTL: 263006
BBL_CR_CTL3: 7e00010f
Perf Ctrl & status: 63d, 63d104f06000648
P-Unit reg55h: 0x48810000
Perf cnt (curr/fixed): 15b56c74/39e3d7a0
Clk Flex Max: 0
Misc EN: 60840080
Therm Status: 883f0000 (offset=0x0)
MC0 Ctl: 0
MC0 Status: 0
BIOS initializations...
CPGC Memtest for rank 0 ..................... PASS
CPGC Memtest for rank 1 ..................... PASS
POST:
RTC Battery ok at last cold boot (0xb)
RTC date Thursday 4/6/2016 15:36:2
POST SPD test ............................... PASS
POST Lower DRAM Memory test
SpeedStep enabled, Processor Bus Ratio=10, Vid=53
Short memory cell test
Perf cnt (curr/fixed): 25138e68/2513be60
POST Lower DRAM Memory test ................. PASS
POST Lower DRAM ECC check ................... PASS
DxE POST
POST Upper DRAM Memory test
SpeedStep enabled, Processor Bus Ratio=10, Vid=53
Short memory cell test
Perf cnt (curr/fixed): ba86b28/ba86cd8
POST Upper DRAM Memory test ................. PASS
POST Upper DRAM ECC check ................... PASS
POST PCIe test .............................. PASS
POST NVRAM check ............................ PASS
P-Unit reg55h = 0x53810000 .................. PASS
POST overall test results ................... PASS
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc. BIOS Date: 06/16/2015 21:34:20 Ver: 0ACAH015 Press <DEL> or <F2> to enter setup.
@wataken44

This comment has been minimized.

Owner

wataken44 commented Apr 6, 2016

この後 serial に反応がなくなる

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment