Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
RT1310
Starting kernel @40000100...
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT Buffalo_WZR2-G300N arm
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
Preloaded elf kernel "kernel" at 0xc0378970.
CPU: ARM926EJ-S rev 5 (ARM9EJ-S core)
Little-endian DC enabled IC enabled WB enabled LABT branch prediction disabled
16KB/32B 4-way instruction cache
16KB/32B 4-way write-back-locking-C data cache
real memory = 0 (0 MB)
avail memory = 11005952 (10 MB)
Physical memory chunk(s):
0x40000000 - 0x40ffffff, 16 MB ( 4096 pages)
Excluded memory regions:
0x40000000 - 0x404b3fff, 4 MB ( 1204 pages) NoAlloc
Static device mappings:
0x19c00000 - 0x1e6fffff mapped at VA 0xfb400000
0x1e800000 - 0x1effffff mapped at VA 0xfac00000
0x1f000000 - 0x1f3fffff mapped at VA 0xfa800000
arc4random: no preloaded entropy cache
firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0xc031737c
wlan: <802.11 Link Layer>
random: entropy device external interface
mem: <memory>
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> on ofwbus0
pcib0: <FV PCI controller> mem 0x19ce0000-0x1dcdffff,0x1dce0000-0x1e4dffff,0x1e4e0000-0x1e6dffff irq 0,1,2,3 on ofwbus0
simplebus2: <Flattened device tree simple bus> on ofwbus0
simplebus2: No interrupt-parent found, assuming direct parent
simplebus2: Missing #interrupt-cells property, assuming <1>
simplebus2: No interrupt-parent found, assuming direct parent
simplebus2: Missing #interrupt-cells property, assuming <1>
pic0: <RT1310 Interrupt Controller> mem 0x40000-0x5ffff on simplebus1
timer0: <RT1310 timer> mem 0-0xf,0x10-0x1f,0x20-0x2f,0x30-0x3f irq 6,7,8 on simplebus2
Event timer "RT1310ATimer2" frequency 74346686 Hz quality 1000
Timecounter "RT1310ATimer1" frequency 74346686 Hz quality 1000
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
simplebus1: <fvmdio@0> mem 0x80000-0x9ffff compat fv,mdio (no driver attached)
fv0: <FV Ethernet interface> mem 0x80000-0x9ffff irq 4 on simplebus1
fv0: bpf attached
fv0: Ethernet address: 00:1a:f1:01:1f:23
fv1: <FV Ethernet interface> mem 0xa0000-0xbffff irq 5 on simplebus1
fv1: bpf attached
fv1: Ethernet address: 00:1a:f1:01:1f:24
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1814, dev=0x0601, revid=0x00
domain=0, bus=0, slot=1, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=0
powerspec 3 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xffff0000, size 16, memory disabled
rt28600: <Ralink RT2860 PCI> irq 12 at device 1.0 on pci0
rt28600: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0x19ce0000
rt28600: invalid EEPROM LNA gain #2: 0x00
rt28600: invalid EEPROM LNA gain #3: 0x00
rt28600: invalid EEPROM powersave level
rt28600: MAC/BBP RT2860 (rev 0x28600102), RF RT2820 2.4G 2T3R(1)
rt28600: skip channel 10, could not find extension channel
rt28600: skip channel 11, could not find extension channel
rt28600: skip channel 12, could not find extension channel
rt28600: skip channel 13, could not find extension channel
rt28600: skip channel 14, could not find extension channel
rt28600: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
rt28600: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
rt28600: 2T2R
rt28600: 11ng MCS 20MHz
rt28600: MCS 0-7: 6.5Mbps - 65Mbps
rt28600: MCS 8-15: 13Mbps - 130Mbps
rt28600: 11ng MCS 20MHz SGI
rt28600: MCS 0-7: 7Mbps - 72Mbps
rt28600: MCS 8-15: 14.5Mbps - 144.5Mbps
rt28600: 11ng MCS 40MHz:
rt28600: MCS 0-7: 13.5Mbps - 135Mbps
rt28600: MCS 8-15: 27Mbps - 270Mbps
rt28600: 11ng MCS 40MHz SGI:
rt28600: MCS 0-7: 15Mbps - 150Mbps
rt28600: MCS 8-15: 30Mbps - 300Mbps
simplebus2: <rtc@20000> mem 0x20000-0x3ffff irq 9 compat rt,rtc (no driver attached)
uart0: <16550 or compatible> mem 0x40000-0x5ffff irq 10 on simplebus2
uart0: console (38400,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
gpio0: <RT1310 GPIO> mem 0xa0000-0xbffff irq 11 on simplebus2
gpiobus0: <OFW GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
cfi0: <AMD/Fujitsu - 4MB> mem 0x1f000000-0x1f3fffff on ofwbus0
cfi0: [8x8KB,63x64KB]
cfi0: Manufacturer ID:16 Device ID:ea00
cfid0 on cfi0
gpioled0: <GPIO LEDs> on ofwbus0
ofwbus0: <ip17x@0> compat icplus,ip17x (no driver attached)
Timecounters tick every 10.000 msec
lo0: bpf attached
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 512
GEOM: new disk cfid0
Trying to mount root from cd9660:/dev/cfid0s.rootfs.uzip []...
MAP: No valid partition found at cfid0
cfid0: slice 00000000-0000dfff: uboot (55KB)
cfid0: slice 0000e000-0000ffff: uboot_environ (7KB)
cfid0: slice 00010000-0012ffff: firmware (1151KB)
cfid0: slice 00130000-003cffff: rootfs (2687KB)
cfid0: slice 003e0000-003effff: factory_default (63KB)
cfid0: slice 003f0000-003fffff: nvram (63KB)
cfid0: slice 00010000-003cffff: upgrade (3839KB)
MAP: No valid partition found at cfid0s.uboot
MAP: No valid partition found at cfid0s.uboot_environ
MAP: No valid partition found at cfid0s.firmware
MAP: No valid partition found at cfid0s.rootfs
MAP: No valid partition found at cfid0s.factory_default
MAP: No valid partition found at cfid0s.nvram
MAP: No valid partition found at cfid0s.upgrade
MAP: No valid partition found at cfid0s.rootfs.uzip
cd9660: RockRidge Extension
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
kern.coredump: 1 -> 0
net.inet.ip.forwarding: 0 -> 1
memory disk size = 1m
MAP: No valid partition found at md0
random: unblocking device.
MAP: No valid partition found at md0
lo0: link state changed to UP
Thu Jan 1 09:01:08 JST 1970
login:
@RussellHaley

This comment has been minimized.

Copy link

commented Jul 12, 2016

ha ha, that's so awesome!

@mizhka

This comment has been minimized.

Copy link

commented Jul 12, 2016

superb!

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.