Last active
September 30, 2018 19:28
-
-
Save yashac3/483decfa8db014edfb055ba5a1f9996e to your computer and use it in GitHub Desktop.
RTL8186 bootlog on this commit: https://github.com/yashac3/linux-rtl8186/commit/340ef7b7db2bf4ca7ef105f7cba18abe78daa2c8
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
UART1 output test ok | |
Uart init | |
mfid=000000c2 devid=00002249 | |
Found 1 x 2M flash memory | |
---RealTek(RTL8186)at 2005.06.06-11:22+0800 version 1.3c [32bit](180MHz) | |
Jump to image start=0x80800000... | |
zimage at: 80802CB0 80929E7C | |
Uncompressing Linux at load address 80010000 | |
Now, booting the kernel... | |
[ 0.000000] Linux version 4.18.0-00011-g340ef7b7db2b (yasha@laptop) (gcc version 8.2.0 (Buildroot 2018.11-git-00556-g361d63f725)) #1 Sun Sep 30 16:03:07 IDT 2018 | |
[ 0.000000] bootconsole [early0] enabled | |
[ 0.000000] CPU0 revision is: 0000c601 (Lexra LX5280) | |
[ 0.000000] MIPS: machine is Edimax BR-6204Wg | |
[ 0.000000] Determined physical RAM map: | |
[ 0.000000] memory: 01000000 @ 00000000 (usable) | |
[ 0.000000] Primary instruction cache 8kB, linesize 16 bytes. | |
[ 0.000000] Primary data cache 8kB, linesize 16 bytes. | |
[ 0.000000] Zone ranges: | |
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000000ffffff] | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000000ffffff] | |
[ 0.000000] random: get_random_bytes called from start_kernel+0x88/0x460 with crng_init=0 | |
[ 0.000000] Built 1 zonelists, mobility grouping off. Total pages: 4064 | |
[ 0.000000] Kernel command line: console=ttyS0,38400n8 root=/dev/mtdblock3 rootfstype=squashfs ro | |
[ 0.000000] Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.000000] Memory: 11132K/16384K available (3027K kernel code, 130K rwdata, 420K rodata, 1216K init, 192K bss, 5252K reserved, 0K cma-reserved) | |
[ 0.000000] NR_IRQS: 128 | |
[ 0.000124] sched_clock: 32 bits at 22MHz, resolution 45ns, wraps every 97612893161ns | |
[ 0.025429] clocksource: rtl8186-clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 86875474859 ns | |
[ 0.059226] Calibrating delay loop... 175.51 BogoMIPS (lpj=877568) | |
[ 0.157702] pid_max: default: 32768 minimum: 301 | |
[ 0.175567] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.197237] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.244372] devtmpfs: initialized | |
[ 0.273152] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
[ 0.305163] futex hash table entries: 256 (order: -1, 3072 bytes) | |
[ 0.329128] NET: Registered protocol family 16 | |
[ 0.447920] clocksource: Switched to clocksource rtl8186-clksrc | |
[ 0.485834] NET: Registered protocol family 2 | |
[ 0.508413] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) | |
[ 0.533627] TCP established hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.556531] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.577395] TCP: Hash tables configured (established 1024 bind 1024) | |
[ 0.599737] UDP hash table entries: 256 (order: 0, 4096 bytes) | |
[ 0.619022] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | |
[ 0.641210] NET: Registered protocol family 1 | |
[ 0.665204] workingset: timestamp_bits=30 max_order=12 bucket_order=0 | |
[ 0.687574] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 0.707012] io scheduler noop registered (default) | |
[ 0.726447] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
[ 0.762946] console [ttyS0] disabled | |
[ 0.775052] 1d0100c3.serial: ttyS0 at MMIO 0x1d0100c3 (irq = 3, base_baud = 11250000) is a 16550A | |
[ 0.804109] console [ttyS0] enabled | |
[ 0.804109] console [ttyS0] enabled | |
[ 0.827383] bootconsole [early0] disabled | |
[ 0.827383] bootconsole [early0] disabled | |
[ 0.862018] 1e000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x002249 | |
[ 0.896331] Amd/Fujitsu Extended Query Table at 0x0040 | |
[ 0.913884] Amd/Fujitsu Extended Query version 1.0. | |
[ 0.931147] number of CFI chips: 1 | |
[ 0.943125] 4 fixed-partitions partitions found on MTD device 1e000000.flash | |
[ 0.966984] Creating 4 MTD partitions on "1e000000.flash": | |
[ 0.985734] 0x000000000000-0x000000008000 : "bootloader+defaults" | |
[ 1.019690] 0x000000008000-0x000000010000 : "settings" | |
[ 1.049483] 0x000000010000-0x000000170000 : "kernel" | |
[ 1.078885] 0x000000170000-0x000000200000 : "rootfs" | |
[ 1.116648] NET: Registered protocol family 17 | |
[ 1.159937] VFS: Mounted root (squashfs filesystem) readonly on device 31:3. | |
[ 1.216561] Freeing unused kernel memory: 1216K | |
[ 1.232054] This architecture does not have kernel memory protection. | |
[ 2.948167] random: fast init done |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment