-
-
Save zhuowei/a6eb8fa13e33999c05ba269836e40138 to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Booting Linux on physical CPU 0x0000000000 [0x517f803c] | |
| Linux version 4.20.0-00008-gec049e9de940-dirty (zhuowei@carl) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-27ubuntu1~18.04)) #36 SMP PREEMPT Mon Dec 24 15:34:34 PST 2018 | |
| Machine model: Qualcomm Technologies, Inc. SDM845 MTP | |
| efi: Getting EFI parameters from FDT: | |
| efi: UEFI not found. | |
| cma: Reserved 16 MiB at 0x00000000ff000000 | |
| NUMA: No NUMA configuration found | |
| NUMA: Faking a node at [mem 0x0000000080000000-0x000000017e09ffff] | |
| NUMA: NODE_DATA [mem 0x17e065840-0x17e066fff] | |
| Zone ranges: | |
| DMA32 [mem 0x0000000080000000-0x00000000ffffffff] | |
| Normal [mem 0x0000000100000000-0x000000017e09ffff] | |
| Movable zone start for each node | |
| Early memory node ranges | |
| node 0: [mem 0x0000000080000000-0x0000000085fbffff] | |
| node 0: [mem 0x0000000088f00000-0x00000000a17fffff] | |
| node 0: [mem 0x00000000a1810000-0x00000000a1a0ffff] | |
| node 0: [mem 0x00000000a1c11000-0x000000017e09ffff] | |
| Zeroed struct page in unavailable ranges: 560 pages | |
| Initmem setup node 0 [mem 0x0000000080000000-0x000000017e09ffff] | |
| On node 0 totalpages: 1027919 | |
| DMA32 zone: 8192 pages used for memmap | |
| DMA32 zone: 0 pages reserved | |
| DMA32 zone: 511663 pages, LIFO batch:63 | |
| Normal zone: 8067 pages used for memmap | |
| Normal zone: 516256 pages, LIFO batch:63 | |
| psci: probing for conduit method from DT. | |
| psci: PSCIv1.1 detected in firmware. | |
| psci: Using standard PSCI v0.2 function IDs | |
| psci: MIGRATE_INFO_TYPE not supported. | |
| psci: SMC Calling Convention v1.0 | |
| random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0 | |
| percpu: Embedded 23 pages/cpu @(____ptrval____) s55512 r8192 d30504 u94208 | |
| pcpu-alloc: s55512 r8192 d30504 u94208 alloc=23*4096 | |
| pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 | |
| Detected VIPT I-cache on CPU0 | |
| CPU features: detected: Kernel page table isolation (KPTI) | |
| CPU features: detected: Hardware dirty bit management | |
| Built 1 zonelists, mobility grouping on. Total pages: 1011660 | |
| Policy zone: Normal | |
| Kernel command line: rootwait ro init=/init androidboot.bootdevice=1d84000.ufshc androidboot.baseband=sdm androidboot.keymaster=1 msm_drm.dsi_display0=dsi_s6e3ha8_cmd_display::timing0 skip_initramfs androidboot.serialno=(no pls) androidboot.slot_suffix=_b androidboot.hardware.platform=sdm845 androidboot.hardware=crosshatch androidboot.revision=MP1.0 androidboot.bootloader=b1c1-0.1-5034669 androidboot.hardware.sku=G013C androidboot.hardware.radio.subtype=0 androidboot.dtbo_idx=0 androidboot.bootreason=reboot androidboot.hardware.ddr=4GB,Micron,LPDDR4X androidboot.ddr_info=Micron androidboot.ddr_size=4GB androidboot.hardware.ufs=128GB,Micron androidboot.cid=00000000 androidboot.boottime=0BLE:92,1BLL:167,1BLE:860,2BLL:120,2BLE:152847,SW:2178,KL:0,KD:2265,ODT:0,AVB:26 androidboot.ramdump=disabled androidboot.blockchain=disabled dm="1 vroot none ro 1,0 5676008 verity 1 PARTUUID=d0bc5fc3-d9b9-4f06-8a71-03dd463b4380 PARTUUID=d0bc5fc3-d9b9-4f06-8a71-03dd463b4380 4096 4096 709501 70 | |
| software IO TLB: mapped [mem 0xfafff000-0xfefff000] (64MB) | |
| Memory: 3906660K/4111676K available (10620K kernel code, 1408K rwdata, 4720K rodata, 1152K init, 386K bss, 188632K reserved, 16384K cma-reserved) | |
| SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 | |
| rcu: Preemptible hierarchical RCU implementation. | |
| rcu: | |
| RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. | |
| Tasks RCU enabled. | |
| rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 | |
| NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| GICv3: Distributor has no Range Selector support | |
| GICv3: no VLPI support, no direct LPI support | |
| GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000 | |
| ITS: No ITS available, not enabling LPIs | |
| of_clk_set_defaults called with xo-board, <NULL>, xo-board, supplier | |
| of_clk_set_defaults called with xo-board, <NULL>, xo-board, supplier | |
| of_clk_set_defaults called with sleep-clk, <NULL>, sleep-clk, supplier | |
| of_clk_set_defaults called with sleep-clk, <NULL>, sleep-clk, supplier | |
| arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). | |
| clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns | |
| sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns | |
| Console: colour dummy device 80x25 | |
| Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) | |
| pid_max: default: 32768 minimum: 301 | |
| LSM: Security Framework initializingg | |
| Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) | |
| Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) | |
| Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)o | |
| Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) | |
| ASID allocator initialised with 32768 entries | |
| rcu: Hierarchical SRCU implementation. | |
| EFI services will not be available. | |
| smp: Bringing up secondary CPUs ... | |
| Detected VIPT I-cache on CPU1 | |
| GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000 | |
| CPU1: Booted secondary processor 0x0000000100 [0x517f803c] | |
| Detected VIPT I-cache on CPU2 | |
| GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000 | |
| CPU2: Booted secondary processor 0x0000000200 [0x517f803c] | |
| Detected VIPT I-cache on CPU3 | |
| GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000 | |
| CPU3: Booted secondary processor 0x0000000300 [0x517f803c] | |
| Detected VIPT I-cache on CPU4 | |
| GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000 | |
| CPU4: Booted secondary processor 0x0000000400 [0x516f802d] | |
| Detected VIPT I-cache on CPU5 | |
| GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000 | |
| CPU5: Booted secondary processor 0x0000000500 [0x516f802d] | |
| Detected VIPT I-cache on CPU6 | |
| GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000cGl | |
| CPU6: Booted secondary processor 0x0000000600 [0x516f802d] | |
| Detected VIPT I-cache on CPU7 | |
| GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000p | |
| CPU7: Booted secondary processor 0x0000000700 [0x516f802d] | |
| smp: Brought up 1 node, 8 CPUs | |
| SMP: Total of 8 processors activated. | |
| CPU features: detected: GIC system register CPU interface | |
| CPU features: detected: Privileged Access Never | |
| CPU features: detected: User Access Override | |
| CPU features: detected: 32-bit EL0 Support | |
| CPU features: detected: RAS Extension Support | |
| CPU features: detected: Data cache clean to the PoU not required for I/D coherence | |
| CPU features: detected: CRC32 instructions | |
| CPU features: detected: Common not Private translations | |
| CPU: All CPU(s) started at EL1 | |
| alternatives: patching kernel code | |
| devtmpfs: initialized | |
| device: 'platform': device_add | |
| PM: Adding info for No Bus:platform | |
| bus: 'platform': registered | |
| bus: 'cpu': registered | |
| device: 'cpu': device_add | |
| PM: Adding info for No Bus:cpu | |
| bus: 'container': registeredgPC | |
| device: 'container': device_add | |
| PM: Adding info for No Bus:containerZ | |
| bus: 'workqueue': registered | |
| device: 'workqueue': device_add | |
| PM: Adding info for No Bus:workqueueSMX | |
| clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| futex hash table entries: 2048 (order: 5, 131072 bytes) | |
| pinctrl core: initialized pinctrl subsystem | |
| bus: 'gpio': registered | |
| bus: 'platform': add driver hi3516cv300-crg | |
| bus: 'platform': add driver hi3519-clk | |
| bus: 'platform': add driver hi3660-clk | |
| bus: 'platform': add driver hi3670-clk | |
| bus: 'platform': add driver hi3798cv200-crg | |
| bus: 'platform': add driver gcc-msm8916 | |
| bus: 'platform': add driver gcc-msm8994 | |
| bus: 'platform': add driver gcc-msm8996 | |
| bus: 'platform': add driver qcom-clk-smd-rpm | |
| bus: 'platform': add driver exynos5433-cmu | |
| bus: 'platform': add driver stratix10-clkmgr | |
| bus: 'platform': add driver vexpress-osc | |
| bus: 'platform': add driver zx296718-clkc | |
| bus: 'platform': add driver fsl-guts | |
| bus: 'virtio': registered | |
| device class 'regulator': registering | |
| Registering platform device 'reg-dummy'. Parent at platform | |
| device: 'reg-dummy': device_add | |
| bus: 'platform': add device reg-dummy | |
| PM: Adding info for platform:reg-dummy | |
| bus: 'platform': add driver reg-dummy | |
| bus: 'platform': driver_probe_device: matched device reg-dummy with driver reg-dummy | |
| bus: 'platform': really_probe: probing driver reg-dummy with device reg-dummy | |
| reg-dummy reg-dummy: no default pinctrl stateSUBSYSTEM=platform | |
| DEVICE=+platform:reg-dummy | |
| device: 'regulator.0': device_add | |
| PM: Adding info for No Bus:regulator.0 | |
| driver: 'reg-dummy': driver_bound: bound to device 'reg-dummy' | |
| bus: 'platform': really_probe: bound device reg-dummy to driver reg-dummy | |
| bus: 'genpd': registered | |
| bus: 'soc': registered | |
| bus: 'platform': add driver vexpress-syscfg | |
| bus: 'platform': add driver vexpress-sysreg | |
| DMI not present or invalid. | |
| bus: 'platform': add driver tegra-bpmp | |
| bus: 'platform': add driver hi3660-mbox | |
| bus: 'platform': add driver hi6220-mbox | |
| bus: 'platform': add driver tegra-hsp | |
| NET: Registered protocol family 16 | |
| audit: initializing netlink subsys (disabled) | |
| device class 'bdi': registering | |
| audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1 | |
| bus: 'platform': add driver ramoops | |
| bus: 'platform': add driver renesas_irqc. | |
| bus: 'platform': add driver rockchip-pinctrl | |
| bus: 'platform': add driver samsung-pinctrl | |
| bus: 'platform': add driver sh-pfc | |
| device class 'pci_bus': registering | |
| bus: 'pci': registered | |
| bus: 'pci_express': registered | |
| device class 'backlight': registering | |
| bus: 'amba': registered | |
| bus: 'platform': add driver rockchip-pm-domain | |
| bus: 'platform': add driver exynos-pmu | |
| bus: 'platform': add driver reset-hi6220Y | |
| device class 'tty': registering | |
| device class 'vtconsole': registering | |
| device: 'vtcon0': device_add | |
| PM: Adding info for No Bus:vtcon0 | |
| device class 'iommu': registering | |
| bus: 'mipi-dsi': registered | |
| bus: 'node': registered | |
| device: 'node': device_add | |
| PM: Adding info for No Bus:node | |
| bus: 'platform': add driver sram | |
| bus: 'platform': add driver syscon | |
| bus: 'spi': registered | |
| device class 'spi_master': registering | |
| bus: 'spmi': registered | |
| bus: 'i2c': registered | |
| bus: 'i2c': add driver dummyQ | |
| cpuidle: using governor menu | |
| bus: 'platform': add driver qcom_hwspinlock | |
| bus: 'rpmsg': registered | |
| vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____)) | |
| hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| DMA: preallocated 256 KiB pool for atomic allocations | |
| bus: 'platform': add driver tegra124-pinctrlY | |
| bus: 'platform': add driver tegra210-pinctrl | |
| bus: 'platform': add driver ns2-pinmux | |
| bus: 'platform': add driver msm8916-pinctrl | |
| bus: 'platform': add driver msm8994-pinctrl | |
| bus: 'platform': add driver msm8996-pinctrl | |
| bus: 'platform': add driver qdf2xxx-pinctrl | |
| bus: 'platform': add driver sdm845-pinctrl | |
| bus: 'platform': add driver mediatek-mt2712-pinctrl | |
| bus: 'platform': add driver mt6765-pinctrl | |
| bus: 'platform': add driver mediatek-mt8173-pinctrl | |
| bus: 'platform': add driver mt8183-pinctrl | |
| bus: 'platform': add driver clk-mt6797 | |
| bus: 'platform': add driver clk-mt2712 | |
| bus: 'platform': add driver clk-mt7622 | |
| device class 'dma': registering | |
| bus: 'platform': add driver cmd-db | |
| bus: 'platform': add driver rpmh | |
| bus: 'rpmsg': add driver qcom_smd_rpm | |
| bus: 'platform': add driver qcom-smem | |
| bus: 'platform': add driver hi3660-reset | |
| Serial: AMBA PL011 UART driver | |
| bus: 'platform': add driver sbsa-uart | |
| bus: 'amba': add driver uart-pl011 | |
| bus: 'platform': add driver xuartps | |
| bus: 'platform': add driver mvebu-uart | |
| bus: 'platform': add driver iproc-gpio | |
| device: '85fe0000.memory': device_add | |
| bus: 'platform': add device 85fe0000.memory | |
| PM: Adding info for platform:85fe0000.memory | |
| bus: 'platform': driver_probe_device: matched device 85fe0000.memory with driver cmd-db | |
| bus: 'platform': really_probe: probing driver cmd-db with device 85fe0000.memory | |
| cmd-db 85fe0000.memory: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:85fe0000.memory0D | |
| of_clk_set_defaults called with memory, <NULL>, memory@85fe0000, not supplier | |
| driver: 'cmd-db': driver_bound: bound to device '85fe0000.memory' | |
| bus: 'platform': really_probe: bound device 85fe0000.memory to driver cmd-db | |
| device: 'a1810000.ramoops_region': device_add | |
| bus: 'platform': add device a1810000.ramoops_region | |
| PM: Adding info for platform:a1810000.ramoops_region | |
| bus: 'platform': driver_probe_device: matched device a1810000.ramoops_region with driver ramoops | |
| bus: 'platform': really_probe: probing driver ramoops with device a1810000.ramoops_region | |
| ramoops a1810000.ramoops_region: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:a1810000.ramoops_region | |
| of_clk_set_defaults called with ramoops_region, <NULL>, ramoops_region@a1810000, not supplier | |
| printk: console [pstore-1] enabled | |
| device class 'pmsg': registering | |
| device: 'pmsg0': device_add | |
| PM: Adding info for No Bus:pmsg0 | |
| pstore: Registered ramoops as persistent store backend | |
| ramoops: attached 0x200000@0xa1810000, ecc: 0/0 | |
| driver: 'ramoops': driver_bound: bound to device 'a1810000.ramoops_region' | |
| bus: 'platform': really_probe: bound device a1810000.ramoops_region to driver ramoops | |
| device: 'pmu': device_add | |
| bus: 'platform': add device pmu | |
| PM: Adding info for platform:pmu | |
| device: 'timer': device_add | |
| bus: 'platform': add device timer | |
| PM: Adding info for platform:timer | |
| device: 'hwlock': device_add | |
| bus: 'platform': add device hwlock | |
| PM: Adding info for platform:hwlock | |
| bus: 'platform': driver_probe_device: matched device hwlock with driver qcom_hwspinlock | |
| bus: 'platform': really_probe: probing driver qcom_hwspinlock with device hwlock | |
| qcom_hwspinlock hwlock: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:hwlock | |
| of_clk_set_defaults called with hwlock, <NULL>, hwlock, not supplier| | |
| driver: 'qcom_hwspinlock': driver_bound: bound to device 'hwlock' | |
| bus: 'platform': really_probe: bound device hwlock to driver qcom_hwspinlock | |
| device: 'smem': device_add | |
| bus: 'platform': add device smems | |
| PM: Adding info for platform:smem | |
| bus: 'platform': driver_probe_device: matched device smem with driver qcom-smem | |
| bus: 'platform': really_probe: probing driver qcom-smem with device smem | |
| qcom-smem smem: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:smem | |
| of_clk_set_defaults called with smem, <NULL>, smem, not supplier6 | |
| driver: 'qcom-smem': driver_bound: bound to device 'smem' | |
| bus: 'platform': really_probe: bound device smem to driver qcom-smem | |
| device: 'smp2p-cdsp': device_addj | |
| bus: 'platform': add device smp2p-cdsp | |
| PM: Adding info for platform:smp2p-cdsp | |
| device: 'smp2p-lpass': device_add | |
| bus: 'platform': add device smp2p-lpass | |
| PM: Adding info for platform:smp2p-lpass3 | |
| device: 'smp2p-mpss': device_add | |
| bus: 'platform': add device smp2p-mpss | |
| PM: Adding info for platform:smp2p-mpss | |
| device: 'smp2p-slpi': device_add{a | |
| bus: 'platform': add device smp2p-slpi | |
| PM: Adding info for platform:smp2p-slpi | |
| device: 'psci': device_add | |
| bus: 'platform': add device psci | |
| PM: Adding info for platform:psci | |
| device: 'soc': device_add | |
| bus: 'platform': add device soc | |
| PM: Adding info for platform:soc | |
| device: '100000.clock-controller': device_add | |
| bus: 'platform': add device 100000.clock-controller | |
| PM: Adding info for platform:100000.clock-controllerB" | |
| device: '784000.qfprom': device_add | |
| bus: 'platform': add device 784000.qfprom | |
| PM: Adding info for platform:784000.qfprom | |
| device: '1f40000.syscon': device_add| | |
| bus: 'platform': add device 1f40000.syscon | |
| PM: Adding info for platform:1f40000.syscon | |
| device: '3400000.pinctrl': device_add | |
| bus: 'platform': add device 3400000.pinctrl | |
| PM: Adding info for platform:3400000.pinctrl | |
| bus: 'platform': driver_probe_device: matched device 3400000.pinctrl with driver sdm845-pinctrl | |
| bus: 'platform': really_probe: probing driver sdm845-pinctrl with device 3400000.pinctrl | |
| sdm845-pinctrl 3400000.pinctrl: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:3400000.pinctrl | |
| of_clk_set_defaults called with pinctrl, <NULL>, pinctrl@3400000, not supplier | |
| device: 'gpiochip0': device_add | |
| bus: 'gpio': add device gpiochip0 | |
| PM: Adding info for gpio:gpiochip0 | |
| driver: 'sdm845-pinctrl': driver_bound: bound to device '3400000.pinctrl' | |
| bus: 'platform': really_probe: bound device 3400000.pinctrl to driver sdm845-pinctrl | |
| device: '88e2000.phy': device_add | |
| bus: 'platform': add device 88e2000.phy | |
| PM: Adding info for platform:88e2000.phy | |
| device: '88e9000.phy': device_add | |
| bus: 'platform': add device 88e9000.phy | |
| PM: Adding info for platform:88e9000.phy | |
| device: 'a6f8800.usb': device_add | |
| bus: 'platform': add device a6f8800.usb | |
| PM: Adding info for platform:a6f8800.usbT | |
| device: 'af00000.clock-controller': device_add | |
| bus: 'platform': add device af00000.clock-controllerh1 | |
| PM: Adding info for platform:af00000.clock-controller | |
| device: 'c263000.thermal-sensor': device_add5 | |
| bus: 'platform': add device c263000.thermal-sensor | |
| PM: Adding info for platform:c263000.thermal-sensor | |
| device: 'c265000.thermal-sensor': device_add | |
| bus: 'platform': add device c265000.thermal-sensor | |
| PM: Adding info for platform:c265000.thermal-sensor | |
| device: 'c2a0000.reset-controller': device_add | |
| bus: 'platform': add device c2a0000.reset-controller | |
| PM: Adding info for platform:c2a0000.reset-controller | |
| device: 'c440000.spmi': device_add | |
| bus: 'platform': add device c440000.spmi\ | |
| PM: Adding info for platform:c440000.spmi | |
| device: '17990000.mailbox': device_add | |
| bus: 'platform': add device 17990000.mailboxW | |
| PM: Adding info for platform:17990000.mailbox | |
| device: '179c0000.rsc': device_add | |
| bus: 'platform': add device 179c0000.rscH | |
| PM: Adding info for platform:179c0000.rsc | |
| bus: 'platform': driver_probe_device: matched device 179c0000.rsc with driver rpmh | |
| bus: 'platform': really_probe: probing driver rpmh with device 179c0000.rsc | |
| rpmh 179c0000.rsc: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:179c0000.rsc | |
| of_clk_set_defaults called with rsc, <NULL>, rsc@179c0000, not supplier | |
| device: '179c0000.rsc:clock-controller': device_add | |
| bus: 'platform': add device 179c0000.rsc:clock-controller | |
| PM: Adding info for platform:179c0000.rsc:clock-controller | |
| device: '179c0000.rsc:pm8998-rpmh-regulators': device_add | |
| bus: 'platform': add device 179c0000.rsc:pm8998-rpmh-regulators | |
| PM: Adding info for platform:179c0000.rsc:pm8998-rpmh-regulators; | |
| device: '179c0000.rsc:pmi8998-rpmh-regulators': device_add | |
| bus: 'platform': add device 179c0000.rsc:pmi8998-rpmh-regulators | |
| PM: Adding info for platform:179c0000.rsc:pmi8998-rpmh-regulators | |
| device: '179c0000.rsc:pm8005-rpmh-regulators': device_add | |
| bus: 'platform': add device 179c0000.rsc:pm8005-rpmh-regulators | |
| PM: Adding info for platform:179c0000.rsc:pm8005-rpmh-regulators~ | |
| driver: 'rpmh': driver_bound: bound to device '179c0000.rsc' | |
| bus: 'platform': really_probe: bound device 179c0000.rsc to driver rpmh | |
| device: '17c90000.timer': device_add | |
| bus: 'platform': add device 17c90000.timer | |
| PM: Adding info for platform:17c90000.timer | |
| device: 'vph-pwr-regulator': device_add | |
| bus: 'platform': add device vph-pwr-regulator | |
| PM: Adding info for platform:vph-pwr-regulator | |
| device: 'pm8998-smps4': device_add | |
| bus: 'platform': add device pm8998-smps4 | |
| PM: Adding info for platform:pm8998-smps4 | |
| device: 'node0': device_add | |
| bus: 'node': add device node0 | |
| PM: Adding info for node:node0 | |
| device: 'cpu0': device_add | |
| bus: 'cpu': add device cpu0 | |
| PM: Adding info for cpu:cpu0 | |
| device: 'cpu1': device_add | |
| bus: 'cpu': add device cpu1 | |
| PM: Adding info for cpu:cpu1& | |
| device: 'cpu2': device_add | |
| bus: 'cpu': add device cpu2 | |
| PM: Adding info for cpu:cpu2 | |
| device: 'cpu3': device_add | |
| bus: 'cpu': add device cpu3 | |
| PM: Adding info for cpu:cpu3 | |
| device: 'cpu4': device_add | |
| bus: 'cpu': add device cpu4 | |
| PM: Adding info for cpu:cpu4 | |
| device: 'cpu5': device_add | |
| bus: 'cpu': add device cpu5 | |
| PM: Adding info for cpu:cpu5qC | |
| device: 'cpu6': device_add | |
| bus: 'cpu': add device cpu6 | |
| PM: Adding info for cpu:cpu6c | |
| device: 'cpu7': device_add | |
| bus: 'cpu': add device cpu7 | |
| PM: Adding info for cpu:cpu7k | |
| device: 'writeback': device_add | |
| bus: 'workqueue': add device writeback | |
| PM: Adding info for workqueue:writeback | |
| HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages | |
| cryptd: max_cpu_qlen set to 1000 | |
| device class 'block': registering | |
| bus: 'i2c': add driver pca953x | |
| bus: 'platform': add driver tegra-gpio | |
| bus: 'platform': add driver xgene-msi | |
| device class 'graphics': registering | |
| device: 'fbcon': device_add | |
| PM: Adding info for No Bus:fbcon | |
| ACPI: Interpreter disabled. | |
| bus: 'pnp': registered | |
| bus: 'platform': add driver s2mps11-clk | |
| bus: 'platform': add driver hi6220-stub-clk | |
| bus: 'platform': add driver hi3660-stub-clk | |
| bus: 'platform': add driver clk-rpmhl | |
| bus: 'platform': driver_probe_device: matched device 179c0000.rsc:clock-controller with driver clk-rpmh | |
| bus: 'platform': really_probe: probing driver clk-rpmh with device 179c0000.rsc:clock-controller | |
| clk-rpmh 179c0000.rsc:clock-controller: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:179c0000.rsc:clock-controller | |
| of_clk_set_defaults called with clock-controller, <NULL>, clock-controller, not supplier | |
| bring up clock 0: xo.lvlg&} | |
| bring up clock 1: xo.lvl | |
| bring up clock 2: lnbclka2 | |
| bring up clock 3: lnbclka2 | |
| bring up clock 4: lnbclka3 | |
| bring up clock 5: lnbclka3 | |
| bring up clock 6: rfclka1 | |
| bring up clock 7: rfclka1 | |
| bring up clock 8: rfclka2 | |
| bring up clock 9: rfclka2 | |
| bring up clock 10: rfclka3 | |
| bring up clock 11: rfclka3 | |
| of_clk_set_defaults called with clock-controller, <NULL>, clock-controller, supplierW | |
| RPMh registeredn | |
| driver: 'clk-rpmh': driver_bound: bound to device '179c0000.rsc:clock-controller' | |
| bus: 'platform': really_probe: bound device 179c0000.rsc:clock-controller to driver clk-rpmh | |
| bus: 'platform': add driver gcc-sdm845 | |
| bus: 'platform': driver_probe_device: matched device 100000.clock-controller with driver gcc-sdm845 | |
| bus: 'platform': really_probe: probing driver gcc-sdm845 with device 100000.clock-controller | |
| gcc-sdm845 100000.clock-controller: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:100000.clock-controller | |
| of_clk_set_defaults called with clock-controller, <NULL>, clock-controller@100000, not supplier | |
| Added domain provider from /soc/clock-controller@100000 | |
| of_clk_set_defaults called with clock-controller, <NULL>, clock-controller@100000, supplier | |
| driver: 'gcc-sdm845': driver_bound: bound to device '100000.clock-controller' | |
| bus: 'platform': really_probe: bound device 100000.clock-controller to driver gcc-sdm845`)* | |
| bus: 'platform': add driver renesas-cpg-mssr | |
| bus: 'platform': remove driver renesas-cpg-mssr | |
| driver: 'renesas-cpg-mssr': driver_release | |
| bus: 'xen-backend': registered | |
| bus: 'xen': registered | |
| bus: 'platform': add driver reg-fixed-voltage | |
| bus: 'platform': driver_probe_device: matched device vph-pwr-regulator with driver reg-fixed-voltage*G, | |
| bus: 'platform': really_probe: probing driver reg-fixed-voltage with device vph-pwr-regulator | |
| reg-fixed-voltage vph-pwr-regulator: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:vph-pwr-regulator | |
| of_clk_set_defaults called with vph-pwr-regulator, <NULL>, vph-pwr-regulator, not supplier | |
| device: 'regulator.1': device_add | |
| PM: Adding info for No Bus:regulator.1 | |
| driver: 'reg-fixed-voltage': driver_bound: bound to device 'vph-pwr-regulator' | |
| bus: 'platform': really_probe: bound device vph-pwr-regulator to driver reg-fixed-voltage | |
| bus: 'platform': driver_probe_device: matched device pm8998-smps4 with driver reg-fixed-voltage | |
| bus: 'platform': really_probe: probing driver reg-fixed-voltage with device pm8998-smps4 | |
| reg-fixed-voltage pm8998-smps4: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:pm8998-smps4 | |
| of_clk_set_defaults called with pm8998-smps4, <NULL>, pm8998-smps4, not supplierID0 | |
| vreg_s4a_1p8: supplied by vph_pwr | |
| device: 'regulator.2': device_add | |
| PM: Adding info for No Bus:regulator.2 | |
| driver: 'reg-fixed-voltage': driver_bound: bound to device 'pm8998-smps4' | |
| bus: 'platform': really_probe: bound device pm8998-smps4 to driver reg-fixed-voltage0]2 | |
| bus: 'platform': add driver gpio-regulator | |
| bus: 'platform': add driver qcom_rpm_smd_regulator | |
| device class 'misc': registering | |
| device: 'vga_arbiter': device_add | |
| PM: Adding info for No Bus:vga_arbiter | |
| vgaarb: loaded | |
| bus: 'i2c': add driver sec_pmic | |
| device class 'scsi_host': registering | |
| bus: 'scsi': registered | |
| device class 'scsi_device': registering | |
| SCSI subsystem initialized | |
| device class 'ata_link': registering" | |
| device class 'ata_port': registering | |
| device class 'ata_device': registering | |
| libata version 3.00 loaded. | |
| bus: 'amba': add driver ssp-pl022 | |
| device class 'mdio_bus': registering | |
| bus: 'mdio_bus': registered | |
| bus: 'mdio_bus': add driver Generic 10G PHY | |
| bus: 'mdio_bus': add driver Generic PHY | |
| device class 'hnae': registering | |
| bus: 'usb': registered | |
| bus: 'usb': add driver usbfs | |
| usbcore: registered new interface driver usbfs | |
| bus: 'usb': add driver hub | |
| usbcore: registered new interface driver hubI@@ | |
| bus: 'usb': add driver usb | |
| usbcore: registered new device driver usb | |
| device class 'udc': registering | |
| bus: 'ulpi': registered | |
| bus: 'serio': registered | |
| device class 'input': registering | |
| device class 'rtc': registering | |
| bus: 'platform': add driver i2c_designware | |
| bus: 'platform': add driver imx-i2c | |
| bus: 'platform': add driver pxa2xx-i2c | |
| bus: 'platform': add driver i2c-sh_mobile | |
| bus: 'platform': add driver tegra-i2c | |
| device class 'pps': registering | |
| pps_core: LinuxPPS API ver. 1 registered% | |
| pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>" | |
| device class 'ptp': registering | |
| PTP clock support registered | |
| bus: 'platform': add driver brcmstb-reboot | |
| bus: 'platform': remove driver brcmstb-reboot | |
| driver: 'brcmstb-reboot': driver_releaseu | |
| device class 'power_supply': registeringECH | |
| device class 'hwmon': registering | |
| EDAC MC: Ver: 3.0.0 | |
| bus: 'edac': registered | |
| device: 'edac': device_add | |
| PM: Adding info for No Bus:edac | |
| device: 'mc': device_add | |
| bus: 'edac': add device mc | |
| PM: Adding info for edac:mc | |
| bus: 'mmc': registered | |
| device class 'mmc_host': registeringf | |
| bus: 'sdio': registered | |
| bus: 'platform': add driver qcom_scm | |
| bus: 'platform': add driver sh_cmt | |
| bus: 'platform': add driver sh_tmu | |
| bus: 'platform': add driver qcom-smd | |
| bus: 'iio': registered | |
| bus: 'nvmem': registered | |
| device class 'sound': registering | |
| Advanced Linux Sound Architecture Driver Initialized. | |
| device class 'net': registering | |
| device: 'lo': device_add | |
| PM: Adding info for No Bus:lo | |
| device class 'watchdog': registering | |
| clocksource: Switched to clocksource arch_sys_counter | |
| VFS: Disk quotas dquot_6.6.0 | |
| VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| bus: 'platform': add driver simple-framebuffer | |
| bus: 'pnp': add driver system | |
| pnp: PnP ACPI: disabled | |
| device class 'mem': registering | |
| device: 'mem': device_add | |
| PM: Adding info for No Bus:mem | |
| device: 'null': device_add | |
| PM: Adding info for No Bus:null | |
| device: 'port': device_add | |
| PM: Adding info for No Bus:port | |
| device: 'zero': device_add | |
| PM: Adding info for No Bus:zero | |
| device: 'full': device_add | |
| PM: Adding info for No Bus:full | |
| device: 'random': device_add1 | |
| PM: Adding info for No Bus:random | |
| device: 'urandom': device_add | |
| PM: Adding info for No Bus:urandom | |
| device: 'kmsg': device_add | |
| PM: Adding info for No Bus:kmsg | |
| device: 'tty': device_add | |
| PM: Adding info for No Bus:tty | |
| device: 'console': device_add | |
| PM: Adding info for No Bus:console | |
| device: 'tty0': device_add | |
| PM: Adding info for No Bus:tty0 | |
| device class 'vc': registering | |
| device: 'vcs': device_add | |
| PM: Adding info for No Bus:vcs | |
| device: 'vcsu': device_add | |
| PM: Adding info for No Bus:vcsu | |
| device: 'vcsa': device_add | |
| PM: Adding info for No Bus:vcsa | |
| device: 'vcs1': device_add | |
| PM: Adding info for No Bus:vcs1 | |
| device: 'vcsu1': device_add | |
| PM: Adding info for No Bus:vcsu1. | |
| device: 'vcsa1': device_add | |
| PM: Adding info for No Bus:vcsa1r | |
| device: 'tty1': device_add | |
| PM: Adding info for No Bus:tty1 | |
| device: 'tty2': device_add | |
| PM: Adding info for No Bus:tty2 | |
| device: 'tty3': device_add | |
| PM: Adding info for No Bus:tty3 | |
| device: 'tty4': device_add | |
| PM: Adding info for No Bus:tty4 | |
| device: 'tty5': device_add | |
| PM: Adding info for No Bus:tty5 | |
| device: 'tty6': device_add | |
| PM: Adding info for No Bus:tty6 | |
| device: 'tty7': device_add | |
| PM: Adding info for No Bus:tty7 | |
| device: 'tty8': device_add | |
| PM: Adding info for No Bus:tty8 | |
| device: 'tty9': device_add | |
| PM: Adding info for No Bus:tty9 | |
| device: 'tty10': device_add | |
| PM: Adding info for No Bus:tty10f$~ | |
| device: 'tty11': device_add | |
| PM: Adding info for No Bus:tty11 | |
| device: 'tty12': device_add | |
| PM: Adding info for No Bus:tty12 | |
| device: 'tty13': device_add | |
| PM: Adding info for No Bus:tty13 | |
| device: 'tty14': device_add | |
| PM: Adding info for No Bus:tty14 | |
| device: 'tty15': device_add | |
| PM: Adding info for No Bus:tty15 | |
| device: 'tty16': device_add | |
| PM: Adding info for No Bus:tty16Tl | |
| device: 'tty17': device_add | |
| PM: Adding info for No Bus:tty17 | |
| device: 'tty18': device_add | |
| PM: Adding info for No Bus:tty18 | |
| device: 'tty19': device_add | |
| PM: Adding info for No Bus:tty19n | |
| device: 'tty20': device_add | |
| PM: Adding info for No Bus:tty20 | |
| device: 'tty21': device_add | |
| PM: Adding info for No Bus:tty21 | |
| device: 'tty22': device_add | |
| PM: Adding info for No Bus:tty22B | |
| device: 'tty23': device_add | |
| PM: Adding info for No Bus:tty230 | |
| device: 'tty24': device_add | |
| PM: Adding info for No Bus:tty24Wy | |
| device: 'tty25': device_add | |
| PM: Adding info for No Bus:tty256i | |
| device: 'tty26': device_add | |
| PM: Adding info for No Bus:tty26 | |
| device: 'tty27': device_add | |
| PM: Adding info for No Bus:tty27 | |
| device: 'tty28': device_add | |
| PM: Adding info for No Bus:tty28 | |
| device: 'tty29': device_add | |
| PM: Adding info for No Bus:tty29 | |
| device: 'tty30': device_add | |
| PM: Adding info for No Bus:tty30 | |
| device: 'tty31': device_add | |
| PM: Adding info for No Bus:tty31 | |
| device: 'tty32': device_add | |
| PM: Adding info for No Bus:tty32 | |
| device: 'tty33': device_add | |
| PM: Adding info for No Bus:tty33f | |
| device: 'tty34': device_add | |
| PM: Adding info for No Bus:tty34 | |
| device: 'tty35': device_add | |
| PM: Adding info for No Bus:tty35 | |
| device: 'tty36': device_add | |
| PM: Adding info for No Bus:tty36(Y | |
| device: 'tty37': device_add | |
| PM: Adding info for No Bus:tty37 | |
| device: 'tty38': device_add | |
| PM: Adding info for No Bus:tty38 | |
| device: 'tty39': device_add | |
| PM: Adding info for No Bus:tty39 | |
| device: 'tty40': device_add | |
| PM: Adding info for No Bus:tty40 | |
| device: 'tty41': device_add | |
| PM: Adding info for No Bus:tty41 | |
| device: 'tty42': device_add | |
| PM: Adding info for No Bus:tty42I | |
| device: 'tty43': device_add | |
| PM: Adding info for No Bus:tty43 | |
| device: 'tty44': device_add | |
| PM: Adding info for No Bus:tty44 | |
| device: 'tty45': device_add | |
| PM: Adding info for No Bus:tty45+ | |
| device: 'tty46': device_add | |
| PM: Adding info for No Bus:tty46 | |
| device: 'tty47': device_add | |
| PM: Adding info for No Bus:tty472 | |
| device: 'tty48': device_add | |
| PM: Adding info for No Bus:tty48 | |
| device: 'tty49': device_add | |
| PM: Adding info for No Bus:tty49 | |
| device: 'tty50': device_add | |
| PM: Adding info for No Bus:tty50!} | |
| device: 'tty51': device_add | |
| PM: Adding info for No Bus:tty51aT | |
| device: 'tty52': device_add | |
| PM: Adding info for No Bus:tty52 | |
| device: 'tty53': device_add | |
| PM: Adding info for No Bus:tty53 | |
| device: 'tty54': device_add | |
| PM: Adding info for No Bus:tty54 | |
| device: 'tty55': device_add | |
| PM: Adding info for No Bus:tty55 | |
| device: 'tty56': device_add | |
| PM: Adding info for No Bus:tty56 | |
| device: 'tty57': device_add | |
| PM: Adding info for No Bus:tty57 | |
| device: 'tty58': device_add | |
| PM: Adding info for No Bus:tty58 | |
| device: 'tty59': device_add | |
| PM: Adding info for No Bus:tty59B | |
| device: 'tty60': device_add | |
| PM: Adding info for No Bus:tty60 | |
| device: 'tty61': device_add | |
| PM: Adding info for No Bus:tty61 | |
| device: 'tty62': device_add | |
| PM: Adding info for No Bus:tty62 | |
| device: 'tty63': device_add | |
| PM: Adding info for No Bus:tty63 | |
| device class 'thermal': registering | |
| NET: Registered protocol family 2 | |
| tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) | |
| TCP established hash table entries: 32768 (order: 6, 262144 bytes) | |
| TCP bind hash table entries: 32768 (order: 7, 524288 bytes) | |
| TCP: Hash tables configured (established 32768 bind 32768) | |
| UDP hash table entries: 2048 (order: 4, 65536 bytes)_e | |
| UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) | |
| NET: Registered protocol family 1 | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| PCI: CLS 0 bytes, default 64\ | |
| Unpacking initramfs... | |
| Freeing initrd memory: 1292K | |
| bus: 'platform': add driver armv8-pmu | |
| bus: 'platform': driver_probe_device: matched device pmu with driver armv8-pmu | |
| bus: 'platform': really_probe: probing driver armv8-pmu with device pmu | |
| armv8-pmu pmu: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:pmu | |
| of_clk_set_defaults called with pmu, <NULL>, pmu, not supplier | |
| hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available | |
| driver: 'armv8-pmu': driver_bound: bound to device 'pmu' | |
| bus: 'platform': really_probe: bound device pmu to driver armv8-pmu | |
| kvm [1]: HYP mode not available | |
| device: 'snapshot': device_add | |
| PM: Adding info for No Bus:snapshot | |
| bus: 'clocksource': registered | |
| device: 'clocksource': device_add | |
| PM: Adding info for No Bus:clocksource | |
| device: 'clocksource0': device_add | |
| bus: 'clocksource': add device clocksource0 | |
| PM: Adding info for clocksource:clocksource0* | |
| bus: 'platform': add driver alarmtimer | |
| Registering platform device 'alarmtimer'. Parent at platform:: | |
| device: 'alarmtimer': device_add | |
| bus: 'platform': add device alarmtimer | |
| PM: Adding info for platform:alarmtimer | |
| bus: 'platform': driver_probe_device: matched device alarmtimer with driver alarmtimer | |
| bus: 'platform': really_probe: probing driver alarmtimer with device alarmtimer | |
| alarmtimer alarmtimer: no default pinctrl stateSUBSYSTEM=platform | |
| DEVICE=+platform:alarmtimer | |
| driver: 'alarmtimer': driver_bound: bound to device 'alarmtimer' | |
| bus: 'platform': really_probe: bound device alarmtimer to driver alarmtimer | |
| bus: 'clockevents': registered | |
| device: 'clockevents': device_add | |
| PM: Adding info for No Bus:clockevents | |
| device: 'clockevent0': device_add | |
| bus: 'clockevents': add device clockevent0 | |
| PM: Adding info for clockevents:clockevent0 | |
| device: 'clockevent1': device_add | |
| bus: 'clockevents': add device clockevent1 | |
| PM: Adding info for clockevents:clockevent1 | |
| device: 'clockevent2': device_add | |
| bus: 'clockevents': add device clockevent2 | |
| PM: Adding info for clockevents:clockevent2 | |
| device: 'clockevent3': device_add | |
| bus: 'clockevents': add device clockevent3 | |
| PM: Adding info for clockevents:clockevent3 | |
| device: 'clockevent4': device_add | |
| bus: 'clockevents': add device clockevent4 | |
| PM: Adding info for clockevents:clockevent4 | |
| device: 'clockevent5': device_add | |
| bus: 'clockevents': add device clockevent5 | |
| PM: Adding info for clockevents:clockevent5 | |
| device: 'clockevent6': device_add | |
| bus: 'clockevents': add device clockevent6 | |
| PM: Adding info for clockevents:clockevent6 | |
| device: 'clockevent7': device_add | |
| bus: 'clockevents': add device clockevent7 | |
| PM: Adding info for clockevents:clockevent7 | |
| device: 'broadcast': device_add | |
| bus: 'clockevents': add device broadcastU | |
| PM: Adding info for clockevents:broadcast | |
| bus: 'event_source': registered | |
| device: 'armv8_pmuv3': device_add | |
| bus: 'event_source': add device armv8_pmuv3 | |
| PM: Adding info for event_source:armv8_pmuv3-Q | |
| device: 'breakpoint': device_add|c | |
| bus: 'event_source': add device breakpoint | |
| PM: Adding info for event_source:breakpoint | |
| device: 'software': device_add | |
| bus: 'event_source': add device software | |
| PM: Adding info for event_source:software | |
| Initialise system trusted keyrings | |
| workingset: timestamp_bits=44 max_order=20 bucket_order=0 | |
| squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| NFS: Registering the id_resolver key type | |
| Key type id_resolver registered | |
| Key type id_legacy registered | |
| nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| device: 'autofs': device_add | |
| PM: Adding info for No Bus:autofs | |
| 9p: Installing v9fs 9p2000 file system support | |
| Key type asymmetric registered | |
| Asymmetric key parser 'x509' registered | |
| device class 'bsg': registering | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) | |
| io scheduler noop registered | |
| io scheduler cfq registered (default) | |
| io scheduler mq-deadline registered | |
| io scheduler kyber registered | |
| bus: 'platform': add driver Hisilicon MBIGEN-V2 | |
| bus: 'platform': add driver mvebu-gicp | |
| bus: 'platform': add driver mvebu-icu-subsetb | |
| bus: 'platform': add driver mvebu-icu | |
| bus: 'platform': add driver mvebu-pic | |
| bus: 'platform': add driver mvebu-sei | |
| bus: 'platform': add driver ls-scfg-msi | |
| bus: 'platform': add driver qcom-irq-combiner | |
| bus: 'platform': add driver uniphier-aidet | |
| bus: 'platform': add driver brcm-gisb-arb | |
| bus: 'platform': remove driver brcm-gisb-arb | |
| driver: 'brcm-gisb-arb': driver_release | |
| bus: 'platform': add driver qcom-ebi2 | |
| bus: 'platform': add driver sun50i-de2-bus | |
| bus: 'platform': add driver uniphier-system-bus | |
| device class 'phy': registering | |
| bus: 'platform': add driver xgene-phy | |
| bus: 'platform': add driver sun4i-usb-phy | |
| bus: 'platform': add driver phy-meson-usb2 | |
| bus: 'platform': add driver phy-meson-gxl-usb2 | |
| bus: 'platform': add driver phy-meson-gxl-usb3 | |
| bus: 'platform': add driver phy_rcar_gen3_usb2 | |
| bus: 'platform': add driver rockchip-emmc-phy | |
| bus: 'platform': add driver rockchip-usb2phy | |
| bus: 'platform': add driver tegra-xusb-padctl | |
| bus: 'mdio_bus': add driver phy-bcm-ns2-pci | |
| bus: 'platform': add driver bcm-ns2-usbphy | |
| bus: 'platform': add driver brcm-sata-phy | |
| bus: 'platform': add driver brcmstb-usb-phy | |
| bus: 'platform': add driver sr-pcie-phy | |
| bus: 'platform': add driver hi6220-usb-phy | |
| bus: 'platform': add driver qcom-qusb2-phy | |
| bus: 'platform': driver_probe_device: matched device 88e2000.phy with driver qcom-qusb2-phy | |
| bus: 'platform': really_probe: probing driver qcom-qusb2-phy with device 88e2000.phys | |
| qcom-qusb2-phy 88e2000.phy: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:88e2000.phy | |
| of_clk_set_defaults called with phy, <NULL>, phy@88e2000, not supplier | |
| fqcom-qusb2-phy 88e2000.phy: Failed to get supply 'vdda-pll': -517SUBSYSTEM=platform | |
| DEVICE=+platform:88e2000.phyt | |
| platform 88e2000.phy: Driver qcom-qusb2-phy requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:88e2000.phy | |
| platform 88e2000.phy: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:88e2000.phy | |
| bus: 'platform': add driver exynos-dp-video-phy | |
| bus: 'platform': add driver exynos-mipi-video-phy | |
| bus: 'platform': add driver samsung-usb2-phy | |
| bus: 'platform': add driver exynos5_usb3drd_phy | |
| bus: 'platform': add driver max77620-pinctrl | |
| bus: 'platform': add driver meson-gxbb-pinctrl | |
| bus: 'platform': add driver meson-gxl-pinctrl | |
| bus: 'platform': add driver meson-axg-pinctrl | |
| bus: 'platform': add driver meson-g12a-pinctrl | |
| bus: 'platform': add driver pinctrl-single | |
| bus: 'platform': add driver pinctrl-bcm2835 | |
| bus: 'platform': add driver armada-ap806-pinctrl 7 | |
| bus: 'platform': add driver armada-cp110-pinctrl | |
| bus: 'platform': add driver armada-37xx-pinctrl | |
| bus: 'platform': remove driver armada-37xx-pinctrl | |
| driver: 'armada-37xx-pinctrl': driver_release | |
| bus: 'platform': add driver qcom-spmi-gpio | |
| bus: 'platform': add driver qcom-spmi-mpp | |
| bus: 'platform': add driver sun50i-a64-pinctrl | |
| bus: 'platform': add driver sun50i-a64-r-pinctrl | |
| bus: 'platform': add driver sun8i-h3-r-pinctrl | |
| bus: 'platform': add driver sun50i-h5-pinctrl | |
| bus: 'platform': add driver sun50i-h6-pinctrl | |
| bus: 'platform': add driver sun50i-h6-r-pinctrl | |
| bus: 'platform': add driver uniphier-ld11-pinctrl | |
| bus: 'platform': add driver uniphier-ld20-pinctrl | |
| bus: 'platform': add driver uniphier-pxs3-pinctrl | |
| bus: 'platform': add driver basic-mmio-gpio | |
| bus: 'platform': add driver raspberrypi-exp-gpio� | |
| bus: 'platform': add driver brcmstb-gpio | |
| bus: 'platform': add driver gpio-dwapb | |
| bus: 'platform': add driver max77620-gpio | |
| bus: 'platform': add driver mvebu-gpio | |
| bus: 'amba': add driver pl061_gpio | |
| bus: 'platform': add driver gpio_rcar | |
| bus: 'platform': add driver tegra186-gpio | |
| bus: 'platform': add driver xgene-gpio | |
| bus: 'platform': add driver xgene-gpio-sb | |
| bus: 'pci_express': add driver aer | |
| bus: 'pci_express': add driver pcie_pme | |
| bus: 'pci_express': add driver pciehp | |
| bus: 'pci': add driver pcieport | |
| bus: 'platform': add driver advk-pcie | |
| bus: 'platform': add driver rcar-pcie | |
| bus: 'platform': add driver pci-host-generic | |
| bus: 'platform': add driver iproc-pcie | |
| bus: 'platform': add driver layerscape-pcie | |
| bus: 'platform': remove driver layerscape-pcie | |
| driver: 'layerscape-pcie': driver_release | |
| bus: 'platform': add driver qcom-pcie | |
| bus: 'platform': add driver armada8k-pcie | |
| bus: 'platform': add driver hisi-pcie | |
| bus: 'platform': add driver hisi-pcie-almost-ecam | |
| bus: 'platform': add driver xgene-pcie | |
| bus: 'amba': add driver clcd-pl11x | |
| bus: 'platform': add driver acpi-ged | |
| bus: 'platform': add driver acpi-fanu | |
| bus: 'platform': add driver tegra-ahb | |
| bus: 'platform': add driver of_fixed_factor_clk | |
| bus: 'platform': add driver of_fixed_clk | |
| bus: 'platform': add driver gpio-clk | |
| bus: 'i2c': add driver cs2000-cpQ | |
| bus: 'platform': add driver rk808-clkout( | |
| bus: 'platform': add driver hi655x-clk | |
| bus: 'platform': add driver scpi_clocks | |
| bus: 'platform': add driver bcm2835-clk | |
| bus: 'platform': add driver bcm2835-aux-clk | |
| bus: 'platform': add driver sr-clk | |
| bus: 'platform': add driver gxbb-clkc | |
| bus: 'platform': add driver gxbb-aoclkc | |
| bus: 'platform': add driver axg-clkch | |
| bus: 'platform': add driver axg-aoclkc | |
| bus: 'platform': add driver marvell-armada-3700-xtal-clock | |
| bus: 'platform': add driver marvell-armada-3700-tbg-clock | |
| bus: 'platform': add driver marvell-armada-3700-periph-clockB | |
| bus: 'platform': add driver marvell-ap806-system-controller | |
| bus: 'platform': add driver marvell-ap806-clock | |
| bus: 'platform': add driver marvell-cp110-system-controller0#K | |
| bus: 'platform': add driver marvell-cp110-clock | |
| bus: 'platform': add driver mmcc-msm8996 | |
| bus: 'platform': add driver qcom-a53pll | |
| bus: 'platform': add driver exynos-audss-clk | |
| bus: 'platform': add driver sc9860-clk | |
| bus: 'platform': add driver sun4i-a10-mod0-clk | |
| bus: 'platform': add driver sun9i-a80-mmc-config-clk | |
| bus: 'platform': add driver sun50i-a64-ccu | |
| bus: 'platform': add driver sun50i-h6-ccu | |
| bus: 'platform': add driver uniphier-clkOM | |
| bus: 'platform': add driver mv_xor_v2 | |
| bus: 'amba': add driver dma-pl330 | |
| bus: 'platform': add driver shdma-of | |
| bus: 'platform': add driver rcar-dmac | |
| bus: 'platform': add driver tegra-apbdmai | |
| bus: 'platform': add driver bam-dma-engine | |
| bus: 'platform': add driver hidma-mgmt | |
| bus: 'platform': add driver hidma | |
| bus: 'platform': add driver raspberrypi-power | |
| bus: 'platform': add driver mtk-scpsys | |
| bus: 'platform': add driver meson_gx_pwrc_vpu | |
| bus: 'platform': add driver geni_se_qup | |
| bus: 'platform': add driver qcom_smp2p | |
| bus: 'platform': driver_probe_device: matched device smp2p-cdsp with driver qcom_smp2p | |
| bus: 'platform': really_probe: probing driver qcom_smp2p with device smp2p-cdsp | |
| qcom_smp2p smp2p-cdsp: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-cdsp | |
| of_clk_set_defaults called with smp2p-cdsp, <NULL>, smp2p-cdsp, not supplier | |
| platform smp2p-cdsp: Driver qcom_smp2p requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-cdsp | |
| platform smp2p-cdsp: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-cdsp | |
| bus: 'platform': driver_probe_device: matched device smp2p-lpass with driver qcom_smp2p | |
| bus: 'platform': really_probe: probing driver qcom_smp2p with device smp2p-lpass | |
| qcom_smp2p smp2p-lpass: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-lpass | |
| of_clk_set_defaults called with smp2p-lpass, <NULL>, smp2p-lpass, not supplier | |
| platform smp2p-lpass: Driver qcom_smp2p requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-lpass | |
| platform smp2p-lpass: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-lpass | |
| bus: 'platform': driver_probe_device: matched device smp2p-mpss with driver qcom_smp2p | |
| bus: 'platform': really_probe: probing driver qcom_smp2p with device smp2p-mpss | |
| qcom_smp2p smp2p-mpss: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-mpss | |
| of_clk_set_defaults called with smp2p-mpss, <NULL>, smp2p-mpss, not supplier | |
| platform smp2p-mpss: Driver qcom_smp2p requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-mpss | |
| platform smp2p-mpss: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-mpss | |
| bus: 'platform': driver_probe_device: matched device smp2p-slpi with driver qcom_smp2p | |
| bus: 'platform': really_probe: probing driver qcom_smp2p with device smp2p-slpi | |
| qcom_smp2p smp2p-slpi: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-slpi | |
| of_clk_set_defaults called with smp2p-slpi, <NULL>, smp2p-slpi, not supplier | |
| platform smp2p-slpi: Driver qcom_smp2p requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-slpi/ | |
| platform smp2p-slpi: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-slpi | |
| bus: 'platform': add driver qcom-smsm | |
| bus: 'platform': add driver sunxi-sram | |
| bus: 'platform': add driver tegra-fuse | |
| bus: 'platform': add driver tegra-flowctrl | |
| bus: 'platform': add driver tegra-pmc | |
| bus: 'platform': add driver virtio-mmio | |
| bus: 'pci': add driver virtio-pci | |
| bus: 'virtio': add driver virtio_balloon | |
| bus: 'i2c': add driver fan53555-regulator | |
| bus: 'platform': add driver hi655x-regulator | |
| bus: 'platform': add driver max77620-pmic | |
| bus: 'platform': add driver qcom-rpmh-regulator | |
| bus: 'platform': driver_probe_device: matched device 179c0000.rsc:pm8998-rpmh-regulators with driver qcom-rpmh-regulator | |
| bus: 'platform': really_probe: probing driver qcom-rpmh-regulator with device 179c0000.rsc:pm8998-rpmh-regulators | |
| qcom-rpmh-regulator 179c0000.rsc:pm8998-rpmh-regulators: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:179c0000.rsc:pm8998-rpmh-regulators | |
| of_clk_set_defaults called with pm8998-rpmh-regulators, <NULL>, pm8998-rpmh-regulators, not supplier | |
| smps2: supplied by vph_pwr | |
| smps2: Setting 1100000-1100000uVx] | |
| device: 'regulator.3': device_add | |
| PM: Adding info for No Bus:regulator.3 | |
| smps3: supplied by vph_pwr | |
| smps3: Setting 1352000-1352000uV7 | |
| device: 'regulator.4': device_add | |
| PM: Adding info for No Bus:regulator.4 | |
| smps5: supplied by vph_pwr | |
| smps5: Setting 1904000-2040000uV | |
| device: 'regulator.5': device_add | |
| PM: Adding info for No Bus:regulator.5 | |
| smps7: supplied by vph_pwr | |
| smps7: Setting 900000-1028000uV | |
| device: 'regulator.6': device_add | |
| PM: Adding info for No Bus:regulator.6 | |
| ldo1: supplied by smps7 | |
| ldo1: Setting 880000-880000uV | |
| device: 'regulator.7': device_add | |
| PM: Adding info for No Bus:regulator.7 | |
| ldo2: supplied by smps3 | |
| ldo2: Setting 1200000-1200000uV | |
| device: 'regulator.8': device_add | |
| PM: Adding info for No Bus:regulator.8 | |
| ldo3: supplied by smps7 | |
| ldo3: Setting 1000000-1000000uV | |
| device: 'regulator.9': device_add | |
| PM: Adding info for No Bus:regulator.9 | |
| ldo5: supplied by smps7 | |
| ldo5: Setting 800000-800000uV | |
| device: 'regulator.10': device_add | |
| PM: Adding info for No Bus:regulator.10 | |
| ldo6: supplied by vph_pwr | |
| ldo6: Setting 1856000-1856000uV | |
| device: 'regulator.11': device_add | |
| PM: Adding info for No Bus:regulator.11 | |
| ldo7: supplied by smps5 | |
| ldo7: Setting 1800000-1800000uV | |
| device: 'regulator.12': device_add | |
| PM: Adding info for No Bus:regulator.12 | |
| ldo8: supplied by smps3 | |
| ldo8: Setting 1200000-1248000uV | |
| device: 'regulator.13': device_add | |
| PM: Adding info for No Bus:regulator.13 | |
| ldo9: Setting 1704000-2928000uV | |
| device: 'regulator.14': device_add | |
| PM: Adding info for No Bus:regulator.14 | |
| ldo10: Setting 1704000-2928000uVf | |
| device: 'regulator.15': device_add | |
| PM: Adding info for No Bus:regulator.15 | |
| ldo11: supplied by smps7 | |
| ldo11: Setting 1000000-1048000uV | |
| device: 'regulator.16': device_add | |
| PM: Adding info for No Bus:regulator.16 | |
| ldo12: supplied by smps5~ | |
| ldo12: Setting 1800000-1800000uV | |
| device: 'regulator.17': device_add | |
| PM: Adding info for No Bus:regulator.17 | |
| ldo13: Setting 1800000-2960000uV} | |
| device: 'regulator.18': device_add | |
| PM: Adding info for No Bus:regulator.18 | |
| ldo14: supplied by smps5` | |
| ldo14: Setting 1800000-1800000uV | |
| device: 'regulator.19': device_add | |
| PM: Adding info for No Bus:regulator.19 | |
| ldo15: supplied by smps5P | |
| ldo15: Setting 1800000-1800000uV | |
| device: 'regulator.20': device_add | |
| PM: Adding info for No Bus:regulator.20 | |
| ldo16: Setting 2704000-2704000uV{ | |
| device: 'regulator.21': device_add | |
| PM: Adding info for No Bus:regulator.21 | |
| ldo17: supplied by smps3 | |
| ldo17: Setting 1304000-1304000uV | |
| device: 'regulator.22': device_add | |
| PM: Adding info for No Bus:regulator.22 | |
| ldo18: Setting 2704000-2960000uV | |
| device: 'regulator.23': device_add | |
| PM: Adding info for No Bus:regulator.23 | |
| ldo19: Setting 3300000-3300000uV6 | |
| fldo19: failed to get the current voltage(-131) | |
| fqcom-rpmh-regulator 179c0000.rsc:pm8998-rpmh-regulators: ldo19: devm_regulator_register() failed, ret=-131SUBSYSTEM=platform | |
| DEVICE=+platform:179c0000.rsc:pm8998-rpmh-regulators | |
| device: 'regulator.23': device_unregister | |
| PM: Removing info for No Bus:regulator.23 | |
| device: 'regulator.22': device_unregister | |
| PM: Removing info for No Bus:regulator.22 | |
| device: 'regulator.21': device_unregister | |
| PM: Removing info for No Bus:regulator.21 | |
| device: 'regulator.20': device_unregister | |
| PM: Removing info for No Bus:regulator.20 | |
| device: 'regulator.19': device_unregister | |
| PM: Removing info for No Bus:regulator.19 | |
| device: 'regulator.18': device_unregister | |
| PM: Removing info for No Bus:regulator.18 | |
| device: 'regulator.17': device_unregister | |
| PM: Removing info for No Bus:regulator.17 | |
| device: 'regulator.16': device_unregister | |
| PM: Removing info for No Bus:regulator.16 | |
| device: 'regulator.15': device_unregister | |
| PM: Removing info for No Bus:regulator.15 | |
| device: 'regulator.14': device_unregister | |
| PM: Removing info for No Bus:regulator.14 | |
| device: 'regulator.13': device_unregister | |
| PM: Removing info for No Bus:regulator.13 | |
| device: 'regulator.12': device_unregister | |
| PM: Removing info for No Bus:regulator.12 | |
| device: 'regulator.11': device_unregister | |
| PM: Removing info for No Bus:regulator.11 | |
| device: 'regulator.10': device_unregister | |
| PM: Removing info for No Bus:regulator.10 | |
| device: 'regulator.9': device_unregister | |
| PM: Removing info for No Bus:regulator.9#h2 | |
| device: 'regulator.8': device_unregisterf | |
| PM: Removing info for No Bus:regulator.8 | |
| device: 'regulator.7': device_unregisterjs4 | |
| PM: Removing info for No Bus:regulator.7 | |
| device: 'regulator.6': device_unregister3 | |
| PM: Removing info for No Bus:regulator.6 | |
| device: 'regulator.5': device_unregister | |
| PM: Removing info for No Bus:regulator.5 | |
| device: 'regulator.4': device_unregisterNr9 | |
| PM: Removing info for No Bus:regulator.4 | |
| device: 'regulator.3': device_unregister@/; | |
| PM: Removing info for No Bus:regulator.3& | |
| qcom-rpmh-regulator: probe of 179c0000.rsc:pm8998-rpmh-regulators failed with error -131} | |
| bus: 'platform': driver_probe_device: matched device 179c0000.rsc:pmi8998-rpmh-regulators with driver qcom-rpmh-regulator | |
| bus: 'platform': really_probe: probing driver qcom-rpmh-regulator with device 179c0000.rsc:pmi8998-rpmh-regulators | |
| qcom-rpmh-regulator 179c0000.rsc:pmi8998-rpmh-regulators: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:179c0000.rsc:pmi8998-rpmh-regulators | |
| of_clk_set_defaults called with pmi8998-rpmh-regulators, <NULL>, pmi8998-rpmh-regulators, not supplier | |
| bob: supplied by vph_pwryr= | |
| bob: Setting 3312000-3600000uV | |
| device: 'regulator.25': device_add | |
| PM: Adding info for No Bus:regulator.25 | |
| driver: 'qcom-rpmh-regulator': driver_bound: bound to device '179c0000.rsc:pmi8998-rpmh-regulators' | |
| bus: 'platform': really_probe: bound device 179c0000.rsc:pmi8998-rpmh-regulators to driver qcom-rpmh-regulator | |
| bus: 'platform': driver_probe_device: matched device 179c0000.rsc:pm8005-rpmh-regulators with driver qcom-rpmh-regulator | |
| bus: 'platform': really_probe: probing driver qcom-rpmh-regulator with device 179c0000.rsc:pm8005-rpmh-regulators | |
| qcom-rpmh-regulator 179c0000.rsc:pm8005-rpmh-regulators: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:179c0000.rsc:pm8005-rpmh-regulators | |
| of_clk_set_defaults called with pm8005-rpmh-regulators, <NULL>, pm8005-rpmh-regulators, not supplier�r@ | |
| smps3: supplied by vph_pwr | |
| smps3: Setting 600000-600000uV | |
| device: 'regulator.26': device_add | |
| PM: Adding info for No Bus:regulator.26 | |
| driver: 'qcom-rpmh-regulator': driver_bound: bound to device '179c0000.rsc:pm8005-rpmh-regulators' | |
| bus: 'platform': really_probe: bound device 179c0000.rsc:pm8005-rpmh-regulators to driver qcom-rpmh-regulator | |
| bus: 'platform': add driver qcom-spmi-regulator | |
| bus: 'platform': add driver rk808-regulator | |
| bus: 'platform': add driver s2mps11-pmic9_F | |
| bus: 'platform': add driver uniphier-regulator | |
| bus: 'platform': add driver berlin2-reset | |
| bus: 'platform': add driver meson_reset | |
| bus: 'platform': add driver simple-reset{UI | |
| bus: 'platform': add driver uniphier-reset | |
| bus: 'platform': add driver uniphier-usb3-reset | |
| device: 'ptyp0': device_add | |
| PM: Adding info for No Bus:ptyp0ZGN | |
| device: 'ptyp1': device_add | |
| PM: Adding info for No Bus:ptyp1KGO | |
| device: 'ptyp2': device_add | |
| PM: Adding info for No Bus:ptyp2-8P | |
| device: 'ptyp3': device_add | |
| PM: Adding info for No Bus:ptyp3y5Q | |
| device: 'ptyp4': device_add | |
| PM: Adding info for No Bus:ptyp4 | |
| device: 'ptyp5': device_add | |
| PM: Adding info for No Bus:ptyp5 | |
| device: 'ptyp6': device_add | |
| PM: Adding info for No Bus:ptyp65 | |
| device: 'ptyp7': device_add | |
| PM: Adding info for No Bus:ptyp7 | |
| device: 'ptyp8': device_add | |
| PM: Adding info for No Bus:ptyp8j | |
| device: 'ptyp9': device_add | |
| PM: Adding info for No Bus:ptyp9 | |
| device: 'ptypa': device_add | |
| PM: Adding info for No Bus:ptypak | |
| device: 'ptypb': device_add | |
| PM: Adding info for No Bus:ptypb | |
| device: 'ptypc': device_add | |
| PM: Adding info for No Bus:ptypc | |
| device: 'ptypd': device_add | |
| PM: Adding info for No Bus:ptypd | |
| device: 'ptype': device_add | |
| PM: Adding info for No Bus:ptype?V[ | |
| device: 'ptypf': device_add | |
| PM: Adding info for No Bus:ptypf | |
| device: 'ttyp0': device_add | |
| PM: Adding info for No Bus:ttyp0 | |
| device: 'ttyp1': device_add | |
| PM: Adding info for No Bus:ttyp1 | |
| device: 'ttyp2': device_add | |
| PM: Adding info for No Bus:ttyp2 E_ | |
| device: 'ttyp3': device_add | |
| PM: Adding info for No Bus:ttyp3 | |
| device: 'ttyp4': device_add | |
| PM: Adding info for No Bus:ttyp4 | |
| device: 'ttyp5': device_add | |
| PM: Adding info for No Bus:ttyp5$-b | |
| device: 'ttyp6': device_add | |
| PM: Adding info for No Bus:ttyp6! | |
| device: 'ttyp7': device_add | |
| PM: Adding info for No Bus:ttyp7k | |
| device: 'ttyp8': device_add | |
| PM: Adding info for No Bus:ttyp8 | |
| device: 'ttyp9': device_add | |
| PM: Adding info for No Bus:ttyp9l | |
| device: 'ttypa': device_add | |
| PM: Adding info for No Bus:ttypa< | |
| device: 'ttypb': device_add | |
| PM: Adding info for No Bus:ttypb | |
| device: 'ttypc': device_add | |
| PM: Adding info for No Bus:ttypc | |
| device: 'ttypd': device_add | |
| PM: Adding info for No Bus:ttypd | |
| device: 'ttype': device_add | |
| PM: Adding info for No Bus:ttypeb3j | |
| device: 'ttypf': device_add | |
| PM: Adding info for No Bus:ttypf | |
| device: 'ptmx': device_add | |
| PM: Adding info for No Bus:ptmx | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| bus: 'pnp': add driver serial | |
| Registering platform device 'serial8250'. Parent at platformM | |
| device: 'serial8250': device_add� | |
| bus: 'platform': add device serial8250 | |
| PM: Adding info for platform:serial8250 | |
| device: 'ttyS0': device_add | |
| PM: Adding info for No Bus:ttyS0 | |
| device: 'ttyS1': device_add | |
| PM: Adding info for No Bus:ttyS14 | |
| device: 'ttyS2': device_add | |
| PM: Adding info for No Bus:ttyS2Y+v | |
| device: 'ttyS3': device_add | |
| PM: Adding info for No Bus:ttyS3 | |
| bus: 'platform': add driver serial8250 | |
| bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250 | |
| bus: 'platform': really_probe: probing driver serial8250 with device serial8250 | |
| serial8250 serial8250: no default pinctrl stateSUBSYSTEM=platform | |
| DEVICE=+platform:serial8250 | |
| driver: 'serial8250': driver_bound: bound to device 'serial8250' | |
| bus: 'platform': really_probe: bound device serial8250 to driver serial8250 | |
| bus: 'pci': add driver serial | |
| bus: 'pci': add driver exar_serial | |
| bus: 'platform': add driver bcm2835-aux-uart. | |
| bus: 'platform': add driver dw-apb-uart | |
| bus: 'platform': add driver mt6577-uart | |
| bus: 'platform': add driver uniphier-uart | |
| bus: 'platform': add driver of_serial | |
| bus: 'platform': add driver samsung-uart | |
| SuperH (H)SCI(F) driver initialized | |
| bus: 'platform': add driver sh-sci | |
| bus: 'platform': add driver meson_uart | |
| bus: 'platform': add driver msm_serial | |
| msm_serial: driver initialized | |
| bus: 'platform': add driver qcom_geni_serial | |
| bus: 'platform': add driver serial-tegralW | |
| device class 'virtio-ports': registering | |
| bus: 'virtio': add driver virtio_console | |
| bus: 'virtio': add driver virtio_rproc_serial | |
| bus: 'platform': add driver arm-smmu | |
| bus: 'platform': add driver arm-smmu-v3 | |
| device: 'cache': device_add | |
| PM: Adding info for No Bus:cache | |
| device: 'index0': device_add | |
| PM: Adding info for No Bus:index0 | |
| device: 'index1': device_add | |
| PM: Adding info for No Bus:index1 | |
| device: 'index2': device_add | |
| PM: Adding info for No Bus:index2 | |
| device: 'index3': device_addO | |
| PM: Adding info for No Bus:index3 | |
| device: 'cache': device_add | |
| PM: Adding info for No Bus:cacheC: | |
| device: 'index0': device_add | |
| PM: Adding info for No Bus:index0 | |
| device: 'index1': device_add | |
| PM: Adding info for No Bus:index1 | |
| device: 'index2': device_addhF | |
| PM: Adding info for No Bus:index2 | |
| device: 'index3': device_add | |
| PM: Adding info for No Bus:index3 | |
| device: 'cache': device_add | |
| PM: Adding info for No Bus:cache~ | |
| device: 'index0': device_add | |
| PM: Adding info for No Bus:index0 | |
| device: 'index1': device_addC! | |
| PM: Adding info for No Bus:index1 | |
| device: 'index2': device_add'y | |
| PM: Adding info for No Bus:index2 | |
| device: 'index3': device_add | |
| PM: Adding info for No Bus:index3 | |
| device: 'cache': device_add | |
| PM: Adding info for No Bus:cache | |
| device: 'index0': device_add | |
| PM: Adding info for No Bus:index0 | |
| device: 'index1': device_add | |
| PM: Adding info for No Bus:index1 | |
| device: 'index2': device_add | |
| PM: Adding info for No Bus:index2 | |
| device: 'index3': device_addc | |
| PM: Adding info for No Bus:index3 | |
| device: 'cache': device_add | |
| PM: Adding info for No Bus:cacheO | |
| device: 'index0': device_add | |
| PM: Adding info for No Bus:index0 | |
| device: 'index1': device_add | |
| PM: Adding info for No Bus:index1 | |
| device: 'index2': device_add; | |
| PM: Adding info for No Bus:index2 | |
| device: 'index3': device_add | |
| PM: Adding info for No Bus:index3 | |
| device: 'cache': device_add | |
| PM: Adding info for No Bus:cache | |
| device: 'index0': device_add | |
| PM: Adding info for No Bus:index0 | |
| device: 'index1': device_add>8 | |
| PM: Adding info for No Bus:index1 | |
| device: 'index2': device_addy | |
| PM: Adding info for No Bus:index2 | |
| device: 'index3': device_addB | |
| PM: Adding info for No Bus:index3 | |
| device: 'cache': device_add | |
| PM: Adding info for No Bus:cache | |
| device: 'index0': device_add | |
| PM: Adding info for No Bus:index0 | |
| device: 'index1': device_add | |
| PM: Adding info for No Bus:index1 | |
| device: 'index2': device_add+> | |
| PM: Adding info for No Bus:index2 | |
| device: 'index3': device_addY | |
| PM: Adding info for No Bus:index3 | |
| device: 'cache': device_add | |
| PM: Adding info for No Bus:cache | |
| device: 'index0': device_add | |
| PM: Adding info for No Bus:index0 | |
| device: 'index1': device_addY[ | |
| PM: Adding info for No Bus:index1 | |
| device: 'index2': device_adde | |
| PM: Adding info for No Bus:index2 | |
| device: 'index3': device_add | |
| PM: Adding info for No Bus:index3 | |
| device class 'devcoredump': registering | |
| device: 'loop-control': device_add | |
| PM: Adding info for No Bus:loop-control | |
| device: '7:0': device_add | |
| PM: Adding info for No Bus:7:0 | |
| device: 'loop0': device_add | |
| PM: Adding info for No Bus:loop0 | |
| device: '7:1': device_add | |
| PM: Adding info for No Bus:7:1 | |
| device: 'loop1': device_add | |
| PM: Adding info for No Bus:loop1N | |
| device: '7:2': device_add | |
| PM: Adding info for No Bus:7:2 | |
| device: 'loop2': device_add | |
| PM: Adding info for No Bus:loop2 | |
| device: '7:3': device_add | |
| PM: Adding info for No Bus:7:3 | |
| device: 'loop3': device_add | |
| PM: Adding info for No Bus:loop3 | |
| device: '7:4': device_add | |
| PM: Adding info for No Bus:7:4 | |
| device: 'loop4': device_add | |
| PM: Adding info for No Bus:loop4 | |
| device: '7:5': device_add | |
| PM: Adding info for No Bus:7:5 | |
| device: 'loop5': device_add | |
| PM: Adding info for No Bus:loop5 | |
| device: '7:6': device_add | |
| PM: Adding info for No Bus:7:6 | |
| device: 'loop6': device_add | |
| PM: Adding info for No Bus:loop6" | |
| device: '7:7': device_add | |
| PM: Adding info for No Bus:7:7 | |
| device: 'loop7': device_add | |
| PM: Adding info for No Bus:loop7b | |
| loop: module loaded | |
| bus: 'virtio': add driver virtio_blk@ | |
| bus: 'i2c': add driver max77620 | |
| bus: 'spmi': add driver pmic-spmi | |
| bus: 'i2c': add driver rk808=� | |
| bus: 'platform': add driver hi655x-pmic | |
| device class 'sas_host': registeringDe | |
| device class 'sas_phy': registering | |
| device class 'sas_port': registering | |
| device class 'sas_device': registering | |
| device class 'sas_end_device': registering | |
| device class 'sas_expander': registering | |
| device class 'scsi_disk': registering | |
| bus: 'scsi': add driver sd | |
| bus: 'platform': add driver hisi_sas_v1_hw | |
| bus: 'platform': add driver hisi_sas_v2_hw | |
| bus: 'pci': add driver ahci | |
| bus: 'platform': add driver ahci | |
| bus: 'pci': add driver sata_sil24 | |
| bus: 'platform': add driver ahci-ceva | |
| bus: 'platform': add driver ahci-mvebu | |
| bus: 'platform': add driver xgene-ahci | |
| bus: 'platform': add driver ahci-qoriq | |
| bus: 'platform': add driver sata_rcar | |
| bus: 'platform': add driver pata_platform | |
| bus: 'platform': add driver pata_of_platform | |
| device class 'mtd': registering | |
| device: 'mtd-0': device_add | |
| PM: Adding info for No Bus:mtd-0 | |
| bus: 'spi': add driver m25p80 | |
| bus: 'platform': add driver denali-nand-dt | |
| bus: 'platform': add driver bcm_iproc | |
| bus: 'platform': add driver brcmstb_qspiC | |
| bus: 'platform': add driver orion_spi | |
| bus: 'platform': add driver spi_qup | |
| bus: 'platform': add driver rockchip-spi | |
| bus: 'platform': add driver s3c64xx-spi | |
| bus: 'platform': add driver spmi_pmic_arb | |
| bus: 'platform': driver_probe_device: matched device c440000.spmi with driver spmi_pmic_arb | |
| bus: 'platform': really_probe: probing driver spmi_pmic_arb with device c440000.spmi | |
| spmi_pmic_arb c440000.spmi: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:c440000.spmi | |
| of_clk_set_defaults called with spmi, <NULL>, spmi@c440000, not supplier | |
| spmi spmi-0: PMIC arbiter version v5 (0x50000000)SUBSYSTEM=spmi | |
| DEVICE=+spmi:spmi-0 | |
| device: 'spmi-0': device_add`! | |
| bus: 'spmi': add device spmi-0 | |
| PM: Adding info for spmi:spmi-0 | |
| driver: 'spmi_pmic_arb': driver_bound: bound to device 'c440000.spmi' | |
| bus: 'platform': really_probe: bound device c440000.spmi to driver spmi_pmic_arb | |
| bus: 'platform': add driver mdio-mux-iproc | |
| bus: 'platform': add driver mdio-mux-mmioreg* | |
| bus: 'platform': add driver xgene-mdio | |
| Registering platform device 'Fixed MDIO bus.0'. Parent at platform | |
| device: 'Fixed MDIO bus.0': device_add | |
| bus: 'platform': add device Fixed MDIO bus.0@? | |
| PM: Adding info for platform:Fixed MDIO bus.0 | |
| device: 'fixed-0': device_add | |
| PM: Adding info for No Bus:fixed-0 | |
| libphy: Fixed MDIO Bus: probed | |
| bus: 'mdio_bus': add driver Micrel KS8737 | |
| bus: 'mdio_bus': add driver Micrel KSZ8021 or KSZ8031 | |
| bus: 'mdio_bus': add driver Micrel KSZ8031 | |
| bus: 'mdio_bus': add driver Micrel KSZ8041 | |
| bus: 'mdio_bus': add driver Micrel KSZ8041RNLI | |
| bus: 'mdio_bus': add driver Micrel KSZ8051 | |
| bus: 'mdio_bus': add driver Micrel KSZ8001 or KS8721 | |
| bus: 'mdio_bus': add driver Micrel KSZ8081 or KSZ8091 | |
| bus: 'mdio_bus': add driver Micrel KSZ8061 | |
| bus: 'mdio_bus': add driver Micrel KSZ9021 Gigabit PHY | |
| bus: 'mdio_bus': add driver Micrel KSZ9031 Gigabit PHY | |
| bus: 'mdio_bus': add driver Microchip KSZ9131 Gigabit PHY | |
| bus: 'mdio_bus': add driver Micrel KSZ8873MLL Switchj) | |
| bus: 'mdio_bus': add driver Micrel KSZ886X Switch | |
| bus: 'mdio_bus': add driver Micrel KSZ8795 | |
| bus: 'mdio_bus': add driver Microchip KSZ9477 | |
| tun: Universal TUN/TAP device driver, 1.6 | |
| device: 'tun': device_add | |
| PM: Adding info for No Bus:tun | |
| bus: 'platform': add driver amd-xgbec | |
| bus: 'pci': add driver amd-xgbe | |
| bus: 'platform': add driver xgene-enet | |
| bus: 'platform': add driver macbD | |
| bus: 'platform': add driver bgmac-enet | |
| bus: 'pci': add driver Cavium PTP Driver* | |
| bus: 'platform': add driver Hi-HNS_MDIO | |
| bus: 'platform': add driver hns_dsaf | |
| bus: 'platform': add driver hns-nic | |
| e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k | |
| e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| bus: 'pci': add driver e1000e | |
| igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k | |
| igb: Copyright (c) 2007-2014 Intel Corporation. | |
| bus: 'pci': add driver igb | |
| igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k | |
| igbvf: Copyright (c) 2009 - 2012 Intel Corporation. | |
| bus: 'pci': add driver igbvf | |
| bus: 'platform': add driver orion-mdio | |
| bus: 'platform': add driver mvneta | |
| bus: 'platform': add driver mvpp2 | |
| sky2: driver version 1.30 | |
| bus: 'pci': add driver sky2 | |
| bus: 'platform': add driver ravb | |
| bus: 'platform': add driver smc91x | |
| bus: 'platform': add driver smsc911x | |
| device: 'vfio': device_add | |
| PM: Adding info for No Bus:vfio | |
| device class 'vfio': registeringi/3 | |
| VFIO - User Level meta-driver version: 0.3 | |
| bus: 'pci': add driver vfio-pci | |
| bus: 'platform': add driver dwc32-6 | |
| bus: 'platform': add driver exynos-dwc3 | |
| bus: 'pci': add driver dwc3-pci | |
| bus: 'pci': add driver dwc3-hapsM | |
| bus: 'platform': add driver dwc3-of-simple | |
| bus: 'platform': add driver dwc3-qcom | |
| bus: 'platform': driver_probe_device: matched device a6f8800.usb with driver dwc3-qcom | |
| bus: 'platform': really_probe: probing driver dwc3-qcom with device a6f8800.usb | |
| dwc3-qcom a6f8800.usb: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:a6f8800.usb | |
| of_clk_set_defaults called with usb, <NULL>, usb@a6f8800, not supplier | |
| clk_hw_get_parent_by_index: (____ptrval____) 0 | |
| clock name: gcc_usb30_prim_mock_utmi_clk_src, | |
| returned (____ptrval____) | |
| clk_hw_get_parent_by_index: (____ptrval____) 1 | |
| clock name: gcc_usb30_prim_master_clk_src | |
| returned (____ptrval____) | |
| clk_hw_get_parent_by_index: (____ptrval____) 1 | |
| clock name: gcc_usb30_prim_master_clk_src | |
| returned (____ptrval____) | |
| dwc3-qcom a6f8800.usb: adding to PM domain usb30_prim_gdscSUBSYSTEM=platform | |
| DEVICE=+platform:a6f8800.usb | |
| dwc3-qcom a6f8800.usb: genpd_add_device()SUBSYSTEM=platform | |
| DEVICE=+platform:a6f8800.usbykX | |
| device: 'a600000.dwc3': device_add | |
| bus: 'platform': add device a600000.dwc3 | |
| PM: Adding info for platform:a600000.dwc3 | |
| bus: 'platform': driver_probe_device: matched device a600000.dwc3 with driver dwc3 | |
| bus: 'platform': really_probe: probing driver dwc3 with device a600000.dwc3 | |
| dwc3 a600000.dwc3: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:a600000.dwc3 | |
| of_clk_set_defaults called with dwc3, <NULL>, dwc3@a600000, not supplier | |
| fdwc3 a600000.dwc3: Failed to get clk 'ref': -2SUBSYSTEM=platform | |
| DEVICE=+platform:a600000.dwc3 | |
| fdwc3 a600000.dwc3: failed to initialize coreSUBSYSTEM=platform | |
| DEVICE=+platform:a600000.dwc3e | |
| platform a600000.dwc3: Driver dwc3 requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:a600000.dwc3 | |
| platform a600000.dwc3: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:a600000.dwc3 | |
| driver: 'dwc3-qcom': driver_bound: bound to device 'a6f8800.usb' | |
| bus: 'platform': really_probe: bound device a6f8800.usb to driver dwc3-qcom | |
| bus: 'platform': add driver dwc2 | |
| bus: 'platform': add driver isp1760 | |
| bus: 'pci': add driver isp1760 | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| ehci-pci: EHCI PCI platform driver | |
| bus: 'pci': add driver ehci-pci | |
| ehci-platform: EHCI generic platform driver | |
| bus: 'platform': add driver ehci-platform | |
| ehci-orion: EHCI orion driver | |
| bus: 'platform': add driver orion-ehci | |
| ehci-exynos: EHCI EXYNOS driver | |
| bus: 'platform': add driver exynos-ehci | |
| ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| ohci-pci: OHCI PCI platform driver | |
| bus: 'pci': add driver ohci-pci | |
| ohci-platform: OHCI generic platform driver | |
| bus: 'platform': add driver ohci-platform | |
| ohci-exynos: OHCI EXYNOS driver | |
| bus: 'platform': add driver exynos-ohci | |
| bus: 'pci': add driver xhci_hcd | |
| bus: 'platform': add driver xhci-hcd | |
| bus: 'platform': add driver tegra-xusb | |
| bus: 'usb': add driver usb-storage | |
| usbcore: registered new interface driver usb-storage | |
| bus: 'i2c': add driver usb3503 | |
| bus: 'platform': add driver usb3503 | |
| bus: 'platform': add driver ci_hdrc | |
| bus: 'platform': add driver chipidea-usb2 | |
| bus: 'platform': add driver msm_hsusb | |
| bus: 'platform': add driver zevio_usb | |
| bus: 'platform': add driver usbmisc_imx | |
| bus: 'platform': add driver imx_usb | |
| bus: 'platform': add driver tegra-udc | |
| bus: 'platform': add driver snps-udc-plat | |
| bus: 'amba': add driver kmi-pl050 | |
| bus: 'serio': add driver atkbd | |
| bus: 'platform': add driver cros-ec-keybo | |
| bus: 'serio': add driver psmouse | |
| bus: 'platform': add driver hi65xx-powerkey | |
| bus: 'platform': add driver pm8941-pwrkey | |
| bus: 'platform': add driver brcmstb-waketimer | |
| bus: 'i2c': add driver rtc-ds3232 | |
| bus: 'spi': add driver ds3234 | |
| bus: 'platform': add driver rtc-efi | |
| bus: 'platform': remove driver rtc-efi | |
| driver: 'rtc-efi': driver_release | |
| bus: 'platform': add driver max77686-rtcmE | |
| bus: 'amba': add driver rtc-pl031 | |
| bus: 'platform': add driver s3c-rtc | |
| bus: 'platform': add driver s5m-rtc | |
| bus: 'platform': add driver sun6i-rtc | |
| bus: 'platform': add driver tegra_rtc | |
| bus: 'platform': remove driver tegra_rtc | |
| driver: 'tegra_rtc': driver_release | |
| bus: 'platform': add driver xgene-rtc | |
| i2c /dev entries driver | |
| device class 'i2c-dev': registering | |
| bus: 'platform': add driver bcm-iproc-i2c | |
| bus: 'platform': add driver exynos5-hsi2c | |
| bus: 'platform': add driver meson-i2c | |
| bus: 'platform': add driver mv64xxx_i2c | |
| bus: 'platform': add driver i2c_qup | |
| bus: 'platform': add driver rk3x-i2c[ | |
| bus: 'platform': add driver tegra-bpmp-i2c | |
| bus: 'platform': add driver uniphier-fi2c | |
| bus: 'platform': add driver i2c-rcar | |
| bus: 'platform': add driver zx2967_i2c | |
| bus: 'platform': add driver brcmstb-i2c | |
| bus: 'platform': add driver cros-ec-i2c-tunnel | |
| bus: 'i2c': add driver pca954x | |
| bus: 'platform': add driver ptp-dte | |
| bus: 'platform': add driver msm-restart | |
| bus: 'platform': add driver vexpress-reset | |
| bus: 'platform': add driver xgene-reboot | |
| bus: 'platform': add driver syscon-reboot | |
| bus: 'i2c': add driver bq27xxx-battery | |
| bus: 'platform': add driver scpi-hwmon | |
| bus: 'platform': add driver ns-thermal | |
| bus: 'platform': add driver exynos-tmu | |
| bus: 'platform': add driver hisi_thermal | |
| bus: 'platform': add driver s3c2410-wdt | |
| bus: 'platform': add driver bcm2835-wdt | |
| bus: 'platform': add driver renesas_wdt | |
| device: 'device-mapper': device_add | |
| PM: Adding info for No Bus:device-mapperqw | |
| device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com | |
| bus: 'platform': add driver cpufreq-dt | |
| bus: 'platform': add driver brcmstb-avs-cpufreq | |
| bus: 'platform': add driver scpi-cpufreq | |
| bus: 'platform': add driver tegra20-cpufreq | |
| bus: 'platform': add driver pwrseq_simple | |
| bus: 'platform': add driver pwrseq_emmc | |
| bus: 'mmc_rpmb': registered | |
| bus: 'mmc': add driver mmcblk | |
| bus: 'amba': add driver mmci-pl18x | |
| sdhci: Secure Digital Host Controller Interface driver | |
| sdhci: Copyright(c) Pierre Ossman | |
| bus: 'platform': add driver sdhci-acpi | |
| bus: 'spi': add driver mmc_spi | |
| bus: 'platform': add driver renesas_sdhi_internal_dmac | |
| Synopsys Designware Multimedia Card Interface Driverm | |
| bus: 'platform': add driver dw_mmc | |
| bus: 'platform': add driver dwmmc_exynos | |
| bus: 'platform': add driver dwmmc_k3]N | |
| bus: 'platform': add driver dwmmc_rockchip | |
| bus: 'platform': add driver meson-gx-mmc� | |
| bus: 'platform': add driver sunxi-mmc | |
| bus: 'platform': add driver sdhost-bcm2835 | |
| sdhci-pltfm: SDHCI platform and OF driver helper* | |
| bus: 'platform': add driver sdhci-cdns | |
| bus: 'platform': add driver sdhci-tegra | |
| bus: 'platform': add driver sdhci-arasan | |
| bus: 'platform': add driver sdhci-esdhc | |
| bus: 'platform': add driver sdhci-iproc | |
| bus: 'platform': add driver sdhci_msm | |
| bus: 'platform': add driver sdhci-brcmstb | |
| bus: 'platform': add driver xenon-sdhci | |
| bus: 'platform': add driver scpi_protocol | |
| bus: 'platform': add driver scpi_power_domain | |
| bus: 'platform': add driver raspberrypi-firmware | |
| bus: 'platform': add driver meson-sm1 | |
| bus: 'platform': remove driver meson-sm | |
| driver: 'meson-sm': driver_release | |
| bus: 'platform': add driver zynqmp_firmware | |
| bus: 'hid': registered | |
| bus: 'hid': add driver hid-generic | |
| bus: 'hid': add driver a4tech | |
| bus: 'hid': add driver apple | |
| bus: 'hid': add driver belkin | |
| bus: 'hid': add driver cherry | |
| bus: 'hid': add driver chicony | |
| bus: 'hid': add driver cypress | |
| bus: 'hid': add driver ezkey | |
| bus: 'hid': add driver itetech | |
| bus: 'hid': add driver kensington | |
| bus: 'hid': add driver logitech | |
| bus: 'hid': add driver microsoft | |
| bus: 'hid': add driver monterey | |
| bus: 'hid': add driver redragon | |
| bus: 'usb': add driver usbhid | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| bus: 'amba': add driver mhu | |
| bus: 'platform': add driver platform-mhu | |
| bus: 'platform': add driver bcm2835-mbox | |
| bus: 'platform': add driver brcm-flexrm-mbox | |
| device class 'extcon': registering | |
| bus: 'platform': add driver extcon-usb-gpio | |
| bus: 'platform': add driver exynos-adc | |
| bus: 'platform': add driver meson-saradc | |
| bus: 'platform': add driver qcom-l2cache-pmu | |
| bus: 'platform': add driver qcom-l3cache-pmu | |
| device: 'timer': device_add | |
| PM: Adding info for No Bus:timerA | |
| Registering platform device 'snd-soc-dummy'. Parent at platform | |
| device: 'snd-soc-dummy': device_add | |
| bus: 'platform': add device snd-soc-dummy | |
| PM: Adding info for platform:snd-soc-dummy | |
| bus: 'platform': add driver snd-soc-dummy | |
| bus: 'platform': driver_probe_device: matched device snd-soc-dummy with driver snd-soc-dummymh | |
| bus: 'platform': really_probe: probing driver snd-soc-dummy with device snd-soc-dummy | |
| snd-soc-dummy snd-soc-dummy: no default pinctrl stateSUBSYSTEM=platform | |
| DEVICE=+platform:snd-soc-dummy | |
| driver: 'snd-soc-dummy': driver_bound: bound to device 'snd-soc-dummy' | |
| bus: 'platform': really_probe: bound device snd-soc-dummy to driver snd-soc-dummy | |
| bus: 'platform': add driver soc-audio | |
| bus: 'i2c': add driver ak4613-codec | |
| bus: 'platform': add driver asoc-simple-card | |
| bus: 'platform': add driver rcar_sound | |
| NET: Registered protocol family 17 | |
| 9pnet: Installing 9P2000 support | |
| bus: 'virtio': add driver 9pnet_virtio | |
| Key type dns_resolver registered | |
| device: 'cpu_dma_latency': device_add | |
| PM: Adding info for No Bus:cpu_dma_latency | |
| device: 'network_latency': device_add | |
| PM: Adding info for No Bus:network_latency | |
| device: 'network_throughput': device_add | |
| PM: Adding info for No Bus:network_throughput | |
| device: 'memory_bandwidth': device_add | |
| PM: Adding info for No Bus:memory_bandwidth | |
| registered taskstats version 1 | |
| Loading compiled-in X.509 certificates | |
| pstore: Using compression: deflate | |
| devices_kset: Moving 88e2000.phy to end of list | |
| PM: Moving platform:88e2000.phy to end of list | |
| platform 88e2000.phy: Retrying from deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:88e2000.phyG4^ | |
| bus: 'platform': driver_probe_device: matched device 88e2000.phy with driver qcom-qusb2-phy | |
| bus: 'platform': really_probe: probing driver qcom-qusb2-phy with device 88e2000.phy | |
| qcom-qusb2-phy 88e2000.phy: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:88e2000.phy7(_ | |
| of_clk_set_defaults called with phy, <NULL>, phy@88e2000, not supplier | |
| fqcom-qusb2-phy 88e2000.phy: Failed to get supply 'vdda-pll': -517SUBSYSTEM=platform | |
| DEVICE=+platform:88e2000.phy | |
| platform 88e2000.phy: Driver qcom-qusb2-phy requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:88e2000.phy | |
| platform 88e2000.phy: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:88e2000.phy | |
| devices_kset: Moving smp2p-cdsp to end of list | |
| PM: Moving platform:smp2p-cdsp to end of list | |
| platform smp2p-cdsp: Retrying from deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-cdsp | |
| bus: 'platform': driver_probe_device: matched device smp2p-cdsp with driver qcom_smp2p | |
| bus: 'platform': really_probe: probing driver qcom_smp2p with device smp2p-cdsp | |
| qcom_smp2p smp2p-cdsp: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-cdsp | |
| of_clk_set_defaults called with smp2p-cdsp, <NULL>, smp2p-cdsp, not supplier | |
| platform smp2p-cdsp: Driver qcom_smp2p requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-cdsp | |
| platform smp2p-cdsp: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-cdsp | |
| devices_kset: Moving smp2p-lpass to end of list | |
| PM: Moving platform:smp2p-lpass to end of list | |
| platform smp2p-lpass: Retrying from deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-lpass | |
| bus: 'platform': driver_probe_device: matched device smp2p-lpass with driver qcom_smp2p | |
| bus: 'platform': really_probe: probing driver qcom_smp2p with device smp2p-lpassUPs | |
| qcom_smp2p smp2p-lpass: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-lpass | |
| of_clk_set_defaults called with smp2p-lpass, <NULL>, smp2p-lpass, not supplier | |
| platform smp2p-lpass: Driver qcom_smp2p requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-lpass | |
| platform smp2p-lpass: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-lpass | |
| devices_kset: Moving smp2p-mpss to end of list | |
| PM: Moving platform:smp2p-mpss to end of list | |
| platform smp2p-mpss: Retrying from deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-mpss | |
| bus: 'platform': driver_probe_device: matched device smp2p-mpss with driver qcom_smp2p | |
| bus: 'platform': really_probe: probing driver qcom_smp2p with device smp2p-mpss | |
| qcom_smp2p smp2p-mpss: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-mpss | |
| of_clk_set_defaults called with smp2p-mpss, <NULL>, smp2p-mpss, not supplier | |
| platform smp2p-mpss: Driver qcom_smp2p requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-mpssq | |
| platform smp2p-mpss: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-mpss | |
| devices_kset: Moving smp2p-slpi to end of list | |
| PM: Moving platform:smp2p-slpi to end of list | |
| platform smp2p-slpi: Retrying from deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-slpi | |
| bus: 'platform': driver_probe_device: matched device smp2p-slpi with driver qcom_smp2p | |
| bus: 'platform': really_probe: probing driver qcom_smp2p with device smp2p-slpi | |
| qcom_smp2p smp2p-slpi: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-slpi | |
| of_clk_set_defaults called with smp2p-slpi, <NULL>, smp2p-slpi, not supplierM | |
| platform smp2p-slpi: Driver qcom_smp2p requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-slpiy | |
| platform smp2p-slpi: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-slpi | |
| devices_kset: Moving a600000.dwc3 to end of list | |
| PM: Moving platform:a600000.dwc3 to end of list | |
| platform a600000.dwc3: Retrying from deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:a600000.dwc3 | |
| bus: 'platform': driver_probe_device: matched device a600000.dwc3 with driver dwc3 | |
| bus: 'platform': really_probe: probing driver dwc3 with device a600000.dwc3 | |
| dwc3 a600000.dwc3: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:a600000.dwc3l. | |
| of_clk_set_defaults called with dwc3, <NULL>, dwc3@a600000, not supplierH | |
| fdwc3 a600000.dwc3: Failed to get clk 'ref': -2SUBSYSTEM=platform | |
| DEVICE=+platform:a600000.dwc3 | |
| fdwc3 a600000.dwc3: failed to initialize coreSUBSYSTEM=platform | |
| DEVICE=+platform:a600000.dwc3 | |
| platform a600000.dwc3: Driver dwc3 requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:a600000.dwc3 | |
| platform a600000.dwc3: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:a600000.dwc3 | |
| devices_kset: Moving 88e2000.phy to end of list | |
| PM: Moving platform:88e2000.phy to end of list | |
| platform 88e2000.phy: Retrying from deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:88e2000.phydM | |
| bus: 'platform': driver_probe_device: matched device 88e2000.phy with driver qcom-qusb2-phy | |
| bus: 'platform': really_probe: probing driver qcom-qusb2-phy with device 88e2000.phy | |
| qcom-qusb2-phy 88e2000.phy: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:88e2000.phy | |
| of_clk_set_defaults called with phy, <NULL>, phy@88e2000, not supplier | |
| fqcom-qusb2-phy 88e2000.phy: Failed to get supply 'vdda-pll': -517SUBSYSTEM=platform | |
| DEVICE=+platform:88e2000.phy | |
| platform 88e2000.phy: Driver qcom-qusb2-phy requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:88e2000.phy | |
| platform 88e2000.phy: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:88e2000.phy | |
| devices_kset: Moving smp2p-cdsp to end of list | |
| PM: Moving platform:smp2p-cdsp to end of list | |
| platform smp2p-cdsp: Retrying from deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-cdsp | |
| bus: 'platform': driver_probe_device: matched device smp2p-cdsp with driver qcom_smp2p | |
| bus: 'platform': really_probe: probing driver qcom_smp2p with device smp2p-cdsp | |
| qcom_smp2p smp2p-cdsp: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-cdsp | |
| of_clk_set_defaults called with smp2p-cdsp, <NULL>, smp2p-cdsp, not supplier | |
| platform smp2p-cdsp: Driver qcom_smp2p requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-cdsp | |
| platform smp2p-cdsp: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-cdsp | |
| devices_kset: Moving smp2p-lpass to end of list | |
| PM: Moving platform:smp2p-lpass to end of list | |
| platform smp2p-lpass: Retrying from deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-lpass | |
| bus: 'platform': driver_probe_device: matched device smp2p-lpass with driver qcom_smp2p | |
| bus: 'platform': really_probe: probing driver qcom_smp2p with device smp2p-lpass | |
| qcom_smp2p smp2p-lpass: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-lpass | |
| of_clk_set_defaults called with smp2p-lpass, <NULL>, smp2p-lpass, not supplier | |
| platform smp2p-lpass: Driver qcom_smp2p requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-lpass | |
| platform smp2p-lpass: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-lpass | |
| devices_kset: Moving smp2p-mpss to end of list | |
| PM: Moving platform:smp2p-mpss to end of list | |
| platform smp2p-mpss: Retrying from deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-mpss | |
| bus: 'platform': driver_probe_device: matched device smp2p-mpss with driver qcom_smp2p | |
| bus: 'platform': really_probe: probing driver qcom_smp2p with device smp2p-mpss | |
| qcom_smp2p smp2p-mpss: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-mpss | |
| of_clk_set_defaults called with smp2p-mpss, <NULL>, smp2p-mpss, not supplierx | |
| platform smp2p-mpss: Driver qcom_smp2p requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-mpss | |
| platform smp2p-mpss: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-mpss | |
| devices_kset: Moving smp2p-slpi to end of list | |
| PM: Moving platform:smp2p-slpi to end of list | |
| platform smp2p-slpi: Retrying from deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-slpi | |
| bus: 'platform': driver_probe_device: matched device smp2p-slpi with driver qcom_smp2p | |
| bus: 'platform': really_probe: probing driver qcom_smp2p with device smp2p-slpi | |
| qcom_smp2p smp2p-slpi: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-slpi | |
| of_clk_set_defaults called with smp2p-slpi, <NULL>, smp2p-slpi, not supplierV | |
| platform smp2p-slpi: Driver qcom_smp2p requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-slpi | |
| platform smp2p-slpi: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:smp2p-slpi | |
| devices_kset: Moving a600000.dwc3 to end of listjz | |
| PM: Moving platform:a600000.dwc3 to end of list | |
| platform a600000.dwc3: Retrying from deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:a600000.dwc3 | |
| bus: 'platform': driver_probe_device: matched device a600000.dwc3 with driver dwc3 | |
| bus: 'platform': really_probe: probing driver dwc3 with device a600000.dwc3 | |
| dwc3 a600000.dwc3: no pinctrl handleSUBSYSTEM=platform | |
| DEVICE=+platform:a600000.dwc3! | |
| of_clk_set_defaults called with dwc3, <NULL>, dwc3@a600000, not supplierb? | |
| fdwc3 a600000.dwc3: Failed to get clk 'ref': -2SUBSYSTEM=platform | |
| DEVICE=+platform:a600000.dwc3 | |
| fdwc3 a600000.dwc3: failed to initialize coreSUBSYSTEM=platform | |
| DEVICE=+platform:a600000.dwc3H | |
| platform a600000.dwc3: Driver dwc3 requests probe deferralSUBSYSTEM=platform | |
| DEVICE=+platform:a600000.dwc3 | |
| platform a600000.dwc3: Added to deferred listSUBSYSTEM=platform | |
| DEVICE=+platform:a600000.dwc3 | |
| bus: 'platform': add driver gpio-keys | |
| hctosys: unable to open rtc device (rtc0) | |
| bob: disabling | |
| smps3: disabling) | |
| ALSA device list: | |
| No soundcards found. | |
| fWarning: unable to open an initial console. | |
| Freeing unused kernel memory: 1152K | |
| hlos1_vote_mmnoc_mmu_tbu_sf_gdsc: Power-off latency exceeded, new value 503542 ns | |
| hlos1_vote_mmnoc_mmu_tbu_hf1_gdsc: Power-off latency exceeded, new value 501719 ns | |
| hlos1_vote_mmnoc_mmu_tbu_hf0_gdsc: Power-off latency exceeded, new value 501510 ns | |
| hlos1_vote_aggre_noc_mmu_tbu2_gdsc: Power-off latency exceeded, new value 501615 ns | |
| hlos1_vote_aggre_noc_mmu_tbu1_gdsc: Power-off latency exceeded, new value 502136 ns | |
| hlos1_vote_aggre_noc_mmu_pcie_tbu_gdsc: Power-off latency exceeded, new value 502136 ns | |
| hlos1_vote_aggre_noc_mmu_audio_tbu_gdsc: Power-off latency exceeded, new value 502084 ns-B | |
| ufs_phy_gdsc: Power-off latency exceeded, new value 2968 ns | |
| ufs_card_gdsc: Power-off latency exceeded, new value 2395 ns | |
| Run /init as init process | |
| using random self ethernet address | |
| using random host ethernet address | |
| wrote to UDC |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment