-
Create an empty file to prevent the service from starting
sudo touch /etc/cloud/cloud-init.disabled
I saw a very good offer for a Wi-Fi Smart Plugs with an Energy Monitoring and I couldn't resist.
The plug was of the [TREEYE] brand (I had not heard it in my life) but I saw that they were [TUYA] and I said to myself... they sure are compatible with [tuya-convert]. ERROR!
I was surprised that [tuya-convert] didn't work and decided to open it for manual flashing. Oh My God! They didn't have an [ESP8266] but a [WB2S module]!
My house MikroTik runs a permanent tunnel to the offices of my job. DHCP configures the devices to send DNS requests to MikroTik, which then sends the requests to Google or forwards them to the DNS server of my job.
Job intranet = intranet.job.local
Job DNS Server = 192.168.90.1
- Make sure you have installed
lm_sensors
- sudo pacman -S lm_sensors --needed
- Download and Install the it87 kernel module for the driver support:
- git clone https://github.com/gamanakis/it87.git --branch=it8688E
- sudo make; sudo make install
- To temporary enable the it87 module
Telegraf is a highly modular software provided by InfluxData that allows us to configure numerous Inputs and Outputs to collect any information.
In this case I have done the tests with my MikroTik hEX S router.
Mikrotik provides you with a MIB file with the OID addresses of its Routers.
Create a file in /etc/telegraf/telegraf.d/
with extension .conf
with the following content:
Utilizar los excedentes de energia generada con paneles en cargas resistivas.
¿Que es WiBeee?
Hecha a mano con tubo de 25x25mm.
- 36x Batería LiFePO4 de 230Ah (Aproximadamente 27kW).
- 2x JK BMS de 24 series 200A con Balanceo Activo.
- Interruptor de corte Aislado de 3 posiciones para Baterías de 12-60V.
- 2x Interruptor de reinicio manual de 200A.