Last active
July 22, 2023 01:45
-
-
Save nopresnik/909f000eb8c0aab389f3eff42ca66d54 to your computer and use it in GitHub Desktop.
Brunswick GS series pinsetter parts list pulled from parts manual
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Part | Description | |
---|---|---|
47-011053-004 | Deflection Chain Gear w/Bearing Complete | |
11-051772-001 | Lockwasher (12 mm) | |
47-011130-004 | Bearing Bolt | |
47-011245-003 | Lower Chain Guide | |
11-052601-001 | Carriage Bolt (8 mm x 30 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
47-011135-000 | N.A. Elevator Frame w/Felt Backing | |
47-011276-003 | Upper Chain Guide | |
11-053583-000 | Rubber Cord (1.1 m) | |
47-011775-003 | Elevator Guard Complete | |
11-051742-001 | Locknut (5 mm) | |
47-013651-003 | N.A. Holding Bracket | |
11-052054-001 | N.A. Flat Washer (5.3 mm) | |
47-861012-001 | R.O. Flat Washer (5.3 mm) (Pkg. of 20) | |
11-051004-001 | N.A. Hex Hd. Cap Screw (5 mm x 25 mm) | |
47-861001-001 | R.O. Hex Hd. Cap Screw (5 mm x 25 mm) Pkg. of 10 | |
47-011134-004 | N.A. Rubber Stop | |
11-051003-001 | N.A. Hex Hd. Cap Screw (5 mm x 16 mm) | |
11-051035-001 | Hex Hd. Cap Screw (6 mm x 16 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
11-051702-001 | Hex Nut (6 mm) | |
47-011518-003 | Elevator Foot Guard | |
11-051701-001 | Hex Nut (5 mm) | |
11-051768-001 | Lockwasher (5 mm) | |
11-053302-001 | Wood Lag Screw (10 mm x 40 mm) | |
11-052028-001 | Flat Washer (10.5 mm) | |
47-013636-004 | N.A. Handle | |
11-051062-001 | Hex Hd. Cap Screw (12 mm x 25 mm) | |
11-051852-001 | Retaining Ring (17 mm) | |
47-021520-004 | Transport Band Hold Down Clamp | |
11-051010-001 | Hex Hd. Cap Screw (8 mm x 20 mm) | |
11-052019-001 | Flat Washer (8.4 mm) | |
47-223170-000 | Bulb Only (12V) | |
47-014687-004 | Trouble Light Assembly w/o Bracket (12V) | |
47-012303-004 | Trouble Light Bracket | |
47-013817-004 | Trouble Light w/Bracket (12V) | |
47-243026-004 | Switch (silver box, consolidated and nexgen) | |
47-012149-003 | Shovel Alignment Bracket | |
11-051015-001 | Hex Hd. Cap Screw (8 mm x 25 mm) | |
11-052006-001 | Flat Washer (8.4 mm) | |
47-014200-004 | Elevator Repair Kit | |
99-050229-004 | Switch (Red Box only) | |
47-011239-004 | Switch Bracket | |
11-051007-001 | Hex Hd. Cap Screw (6 mm x 40 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
11-052010-001 | Flat Washer (6 mm x 25 mm x 1.8 mm) | |
47-011240-004 | Spacer | |
47-010698-003 | Toothed Wheel w/Cam | |
11-430007-000 | Ball Bearing for Bearing Plate (6203ZZ) | |
11-051001-001 | Hex Hd. Cap Screw (6 mm x 12 mm) | |
11-052022-001 | Flat Washer (6.4 mm) | |
47-011125-003 | Bearing Plate Complete | |
47-011050-004 | Carrier Wheel w/Bearing Complete | |
11-051852-001 | Retaining Ring (17 mm) | |
11-052053-001 | N.A. Flat Washer (17 mm) | |
47-861011-001 | R.O. Flat Washer (17 mm) Pkg. of 10 | |
47-011045-004 | Drive Gear | |
47-011127-003 | Drive Spindle | |
11-051008-001 | Hex Hd. Cap Screw (6 mm x 10 mm) | |
11-053501-000 | Key (5 mm x 5 mm x 25 mm) | |
11-051741-001 | Locknut (4 mm) | |
47-011239-004 | Switch Mounting Plate | |
99-050229-004 | Switch Complete (Red Box only) | |
11-052201-001 | N.A. Sltd. Machine Screw (4 mm x 10 mm) | |
11-054301-001 | N.A. Hitch Pin (3 mm x 62 mm) | |
47-861032-001 | R.O. Hitch Pin (3 mm x 62 mm) Pkg. of 10 | |
47-011524-004 | N.A. Spacer | |
47-012411-003 | Grooved Pulley | |
47-011145-002 | R.H. Pin Turn Lever | |
47-011146-002 | L.H. Pin Turn Lever | |
46-030120-004 | N.A. PVC Bearing | |
47-011147-004 | Tension Spring | |
11-051002-001 | Hex Hd. Cap Screw (5 mm x 30mm) | |
11-052005-001 | Flat Washer (5.3 mm) | |
11-051742-001 | Locknut (5 mm) | |
11-052003-001 | Flat Washer (8.4 mm) | |
47-011044-003 | Chain Gear w/Toothed Wheel and Bearing Complete | |
47-013788-004 | 5/8 Chain w/Shovel Pins Complete (4318 mm Long) | |
47-011241-004 | Spacer Washer (40 mm x 5.1 mm) | |
11-051851-001 | Retaining Ring Ext. (12 mm) | |
11-052001-001 | N.A. Flat Washer (12 mm) | |
47-861009-001 | R.O. Flat Washer (12 mm) Pkg. of 20 | |
47-011047-004 | Nylon Track Wheel (large) | |
47-011049-001 | Pin Shovel Only | |
47-013532-000 | N.A. Pin Shovel Complete | |
47-013532-009 | R.O. Pin Shovel Assembly | |
47-013532-009 | Pin Shovel Complete | |
47-011048-004 | Pivoting Lever | |
11-051702-001 | Hex Nut (6 mm) | |
46-050255-004 | Spring | |
11-051795-001 | Split Pin (1.6 mm x 16 mm) | |
11-052006-001 | Flat Washer (8.4 mm) | |
47-011133-003 | Ejecting Flap | |
11-051542-001 | N.A. Socket Hd. Cap Screw (5 mm x 25 mm) | |
11-051522-001 | Socket Hd. Cap Screw (5 mm x 16 mm) | |
47-010061-004 | N.A. Rubber Plate | |
47-010059-004 | N.A. Nylon Bumper | |
11-051793-001 | Split Pin (2 mm x 16 mm) | |
11-051015-001 | Hex Hd. Cap Screw (8 mm x 25 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
11-051701-001 | Hex Nut (5 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
11-051011-001 | Hex Hd. Cap Screw (8 mm x 50 mm) | |
47-010053-003 | Cross Lever | |
47-013533-009 | Pivoting Lever Assembly | |
47-013871-004 | Master Link w/Long Pin | |
11-600500-000 | Standard Master Link | |
47-013872-004 | Chain Break Tool | |
47-013873-004 | Elevator Chain Repair Kit (includes 10 pins) | |
11-053577-000 | Rubber Bumper | |
47-273835-009 | Ejector Flap Rebuild Kit | |
47-012272-004 | N.A. Counter Weight | |
11-054301-001 | N.A. Hitch Pin (3 mm x 60 mm) | |
47-861032-001 | R.O. Hitch Pin (3 mm x 60 mm) Pkg. of 10 | |
11-052024-001 | N.A. Flat Washer (14 mm) | |
47-861010-001 | R.O. Flat Washer (14 mm) Pkg. of 10 | |
47-012273-004 | N.A. Bushing | |
47-012215-001 | N.A. Y Switch | |
47-012596-000 | N.A. Flipper Shaft | |
47-012628-000 | N.A. Dual Feed Pin Chute w/o "Y" Switch & Deflector Shoe (nose block) | |
11-051015-001 | Hex Hd. Cap Screw (8 mm x 25 mm) | |
47-012263-001 | Deflector Shoe | |
11-051744-001 | Locknut (8 mm) | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-051019-001 | Hex Hd. Cap Screw (10 mm x 25 mm) | |
11-051771-001 | Lockwasher (10 mm) | |
11-051057-001 | Hex Hd. Cap Screw (10 mm x 60 mm) | |
11-052018-001 | Flat Washer (10.5 mm) | |
11-051005-001 | Hex Hd. Cap Screw (10 mm x 20 mm) | |
47-012260-003 | Cross Brace | |
11-051742-001 | Locknut (5 mm) | |
11-051514-001 | Socket Hd. Cap Screw (6 mm x 16 mm) | |
11-051004-001 | N.A. Hex Hd. Cap Screw (5 mm x 25 mm) | |
47-861001-001 | R.O. Hex Hd. Cap Screw (5 mm x 25 mm) Pkg. of 10 | |
47-013639-003 | L.H. Stopper Arm | |
47-013640-003 | R.H. Stopper Arm (shown) | |
11-051002-001 | Hex Hd. Cap Screw (5 mm x 30 mm) | |
46-030120-004 | N.A. PVC Bearing | |
47-013742-004 | Plastic Ring | |
47-013599-004 | N.A. L.H. Flipper Stopper Assembly Complete | |
47-013600-004 | R.O. R.H. Flipper Stopper Assembly Complete | |
11-053583-000 | Rubber Cord | |
47-012255-004 | Dual Feed Pin Chute Plate | |
47-012621-000 | N.A. L.H. Pin Chute Repair Plate (seven pin side) | |
47-013971-001 | N.A. Elevator Frame Complete | |
47-014016-003 | Bearing Plate | |
11-051010-001 | Hex Hd. Machine Screw (8 mm x 20 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
11-054425-000 | Set Screw (8 mm x 80 mm) | |
47-014018-003 | Shovel Guide Wheel | |
47-013931-003 | Upper Chain Sprocket | |
47-014329-003 | Flange | |
11-054450-000 | Self-Tapping Screw (6 mm x 16 mm) | |
47-013956-003 | V-Belt Pulley | |
11-053491-000 | Key (5 mm x 5 mm x 20 mm) | |
11-051852-001 | Retaining Ring (17 mm) | |
47-014017-003 | Shovel Guide | |
11-051053-001 | Hex Hd. Machine Screw (8 mm x 40 mm) | |
11-051744-001 | Locknut (8 mm) | |
11-052006-001 | Flat Washer (8.4 mm) | |
47-013951-003 | Wedge Guide | |
47-013954-003 | Rear Wooden Chain Guide | |
11-052615-001 | Carriage Bolt (8 mm x 35 mm) | |
47-013953-003 | Front Wooden Chain Guide | |
47-013913-002 | Damper Guide | |
47-013946-002 | Lower Pan Guide | |
11-135400-000 | Well Nut | |
11-051881-001 | Slotted Machine Screw (8 mm x 30 mm) | |
47-013912-004 | Slide Band | |
11-053678-000 | Rivet (8.9 mm) | |
47-011053-004 | Deflection Chain Gear w/Bearing Complete | |
11-051772-001 | Lockwasher (12 mm) | |
11-051062-001 | Hex Hd. Machine Screw (12 mm x 25 mm) | |
47-014008-003 | 5/8 Chain w/Shovel Pins Complete (3556 mm long) | |
47-011130-004 | Bearing Bolt | |
47-013532-009 | Pin Shovel Complete | |
47-011241-004 | Spacer Washe (40 mm x 5.1 mm) | |
11-051851-001 | Retaining Ring (12 mm) | |
11-052001-001 | N.A. Flat Washer (12 mm) | |
47-861009-001 | R.O. Flat Washer (12 mm) Pkg. of 20 | |
47-011047-004 | Large Nylon Track Wheel | |
47-011049-001 | Pin Shovel Only | |
47-011048-004 | Pivoting Lever | |
47-011046-004 | Small Nylon Track Wheel | |
11-052018-001 | Flat Washer (10.5 mm) | |
11-051855-001 | Retaining Ring (10 mm) | |
47-013993-001 | R.H. Rear Pin Deflector | |
47-013994-001 | L.H. Rear Pin Deflector | |
47-013991-001 | R.H. Front Pin Deflector | |
47-013992-001 | L.H. Front Pin Deflector | |
47-014009-004 | Spacer | |
11-051075-001 | Hex Hd. Machine Screw (8 mm x 70 mm) | |
11-052031-001 | Flat Washer (9 mm) | |
47-014060-003 | Ejector | |
11-052008-001 | Flat Washer (6.4 mm) | |
11-051018-001 | Hex Hd. Machine Screw (6 mm x 20 mm) | |
11-051743-001 | Locknut (6 mm) | |
47-243027-004 | Switch (silver box consolidated and nexgen) | |
99-050234-004 | Switch Plate | |
11-052037-001 | Flat Washer (6.4 mm) | |
11-052213-001 | Slotted Machine Screw | |
11-051741-001 | Locknut (4 mm) | |
11-052025-001 | Flat Washer (4.3 mm) | |
47-013949-001 | N.A. Pulley Guard (metal) | |
11-054451-000 | Self-Tapping Screw (6 mm x 10 mm) | |
47-013871-004 | Master Link w/Long Pin | |
11-600500-000 | Standard Master Link | |
47-013872-004 | Chain Tool | |
47-013873-004 | Elevator Chain Repair Kit | |
47-013983-003 | N.A. Elevator Rear Guard Only | |
47-013990-002 | R.O. Elevator Rear Guard Complete | |
47-013990-002 | Elevator Rear Guard Assembly | |
47-013652-004 | Lower Pin Plate | |
47-013952-004 | Camloc Fastener Assembly | |
11-051026-001 | Hex Hd. Machine Screw (8 mm x 40 mm) | |
11-051703-001 | Hex Nut (10 mm) | |
47-014331-004 | Spring Shim Washer | |
47-014327-004 | N.A. Seal (Washer) | |
47-014354-003 | Elevator Z Bracket w/o Rubber Mount | |
47-024036-002 | Mounting Bracket | |
11-051038-001 | Hex Hd. Machine Screw (8 mm x 16 mm) | |
11-051883-001 | Slotted Truss Hd. Machine Screw (8 mm x 50 mm) | |
11-052053-001 | N.A. Flat Washer (17 mm) | |
47-861011-007 | R.O. Flat Washer (17 mm) Pkg. of 10 | |
47-245422-003 | Mechanic’s Remote Box w/Cable (Nexgen Electronics) | |
11-053905-000 | V-Belt (1900 mm) | |
47-084015-003 | Cable Channel Support Assembly | |
11-050150-000 | Cone Bearing Assembly | |
11-054105-001 | N.A. Shim Washer (18 mm x 30 mm x 1.5 mm) | |
11-053501-000 | Key | |
11-052057-001 | Flat Washer (18 mm) | |
11-054106-001 | N.A. Shim Washer (18 mm) | |
47-861031-001 | R.O. Shim Washer (18 mm) Pkg. of 10 | |
47-014770-002 | Guard (GS-10/GS-92) | |
47-014687-004 | Trouble Light Assembly w/o Bracket (12V) | |
47-223170-000 | Bulb Only (12V) | |
11-053660-000 | N.A. Rivet (3.2 mm x 7.4 mm) | |
47-861025-000 | R.O. Rivet (3.2 mm x 7.4 mm) Pkg. of 20 | |
11-054452-000 | N.A. Hex Hd. Machine Screw (5 mm x 10 mm) | |
47-014761-003 | Centering Guides | |
47-014756-003 | N.A. Split Shaft Assembly | |
47-015068-003 | R.O. Split Shaft Assembly Complete | |
11-051526-001 | Screw (6 mm x 30 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
47-225160-004 | N.A. Frame Counter | |
47-225160-009 | R.O. Frame Counter w/Cable | |
47-862803-000 | N.A. Chain Lube (spray can) - | |
G34-205116-000 | R.O. Pinsetter Chain Lube (12 oz. can) | |
11-052928-001 | Flat Hd. Socket Screw (M6 x 10 mm) | |
47-085081-004 | GS-X Label | |
47-085579-003 | Danger/Warning Label | |
47-014974-003 | Pulley Guard GS-96 and Above Plastic | |
47-243071-004 | N.A. Mechanic’s Remote Box w/ Cable (Consolidated) | |
47-243071-000 | R.O. Rear Control Box | |
47-014766-009 | Elevator Shaft Kit (square frame hole, two pieces) | |
47-0135533-009 | Pivoting Lever Assembly | |
11-051010-001 | Hex Hd. Machine Screw (8 mm x 20 mm) | |
11-052003-001 | Flat Washer (8.4 mm) | |
47-014770-002 | Guard | |
11-051741-001 | Nut (4 mm, GS-92) | |
11-051744-001 | Nut (8 mm, GS-96) | |
11-055025-001 | N.A. Screw (4 mm x 16 mm) - GS-92 | |
11-051038-001 | Screw (8 mm x 16 mm) - GS-96 | |
47-014267-003 | N.A. Mounting Angle | |
11-051770-001 | Lockwasher (8 mm) | |
47-013953-003 | Front Wooden Chain Guide | |
11-052221-001 | N.A. Slotted Machine Screw (3 mm x 40 mm) | |
11-051704-001 | Nut (8 mm) | |
47-014917-009 | Micro Switch Complete w/Mounting Plate and Guard (Consolidated and Nexgen) | |
47-014918-003 | Micro Switch Only - GS-98 | |
11-051746-001 | Nut (3 mm) | |
11-051743-001 | Hex Locknut (6 mm) | |
47-014761-003 | Centering Guide (upper) | |
11-051018-001 | Hex Hd Machine Screw (6 mm x 20 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
47-014758-001 | N.A. Elevator Frame Complete - GS-92 | |
47-014254-000 | S.O. Elevator Frame Complete - GS-96 | |
11-051038-001 | Screw (8 mm x 16 mm) | |
47-013949-001 | N.A. Metal Pulley Guard - GS-92 | |
47-014974-003 | R.O. Plastic - Pully Guard | |
47-014974-003 | Plastic Pulley Guard - GS-96 & above | |
11-051010-001 | Hex Hd Machine Screw (8 mm x 20 mm) - GS-92 | |
11-051015-001 | Hex Hd Machine Screw (8 mm x 25 mm) - GS-96 | |
47-014238-003 | Cross Bar | |
11-053905-000 | V-Belt (1900 mm) | |
47-014752-003 | Flange | |
47-014751-003 | N.A. Bearing Plate | |
47-015098-003 | Plastic Bearing Flange | |
47-014800-004 | Rubber Bumper | |
47-014239-004 | Support Bar | |
11-054450-000 | Self-Tapping Screw (6 mm x 16 mm) | |
47-014765-002 | Pulley w/o Clamp | |
47-014255-004 | Shock Pad N.A. Damper Plate | |
11-135400-000 | Well Nut (8 mm) | |
47-093874-004 | Clamp Only | |
11-051035-001 | Hex Hd. Cap Screw (6 mm x 16 mm) | |
47-015068-003 | Shaft Assembly Complete (GS-96 and above) | |
11-051881-001 | Truss Hd. Mach. Screw (8 mm x 30 mm) | |
11-052037-001 | Flat Washer (6.4 mm) | |
47-245422-003 | Mechanic’s Remote Box w/ Cable (Nexgen Electronics) | |
11-054452-000 | N.A. Hex Hd. Machine Screw (5 mm x 10 mm) | |
47-014687-004 | Trouble Light Assembly (12V) | |
47-015646-004 | Trouble Light Assembly - Nexgen (24V) | |
47-223170-000 | Bulb Only - Consolidated and Silver Box Electronics (12V) | |
47-223091-000 | N.A. Bulb Only - Nexgen (24V) | |
47-861047-000 | R.O. Bulb Only (Pkg. of 2 LEDs) - (Nexgen Electronics only) | |
11-430050-000 | Bearing | |
47-014252-004 | Shovel Guide Wheel | |
47-014924-003 | Gear (Plastic) | |
47-015643-001 | S.O. Elevator (Complete) | |
47-013954-003 | N.A. Rear Wooden Chain Guide | |
11-053508-000 | Key (6 mm x 6 mm x 20 mm) | |
47-014354-003 | Elevator Z-Bracket w/o Rubber Mount | |
11-051744-001 | Nut (8 mm) | |
47-243071-004 | N.A. Mechanic’s Remote Box w/ Cable (Consolidated) | |
47-243071-000 | R.O. Rear Control Box | |
47-860016-000 | Pin Count Switch Arm | |
11-052928-001 | Flat CTS. Head Screw (6 mm x 10 mm) | |
11-051853-000 | Retaing Ring | |
11-051506-001 | N.A. Hex Skirt Head Cap Screw (M4 x 12 mm) | |
47-023986-001 | R.H. Pin Deflector Board | |
47-023987-001 | L.H. Pin Deflector Board | |
47-024036-002 | Mounting Bracket | |
11-051770-001 | Lockwasher (8 mm) | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-051038-001 | Hex Hd. Machine Screw (8 mm x 16 mm) | |
11-054801-001 | Hex Hd. Socket Button Hd. Machine Screw (8mm x 20mm) | |
11-052019-001 | Flat Washer (8.4 mm) | |
11-051744-001 | Locknut (8 mm) | |
47-023923-003 | N.A. Lexan Division Barrier | |
47-013952-004 | Camloc Fastener Assembly | |
11-051064-001 | Hex Hd. Machine Screw (8 mm x 65 mm) | |
11-052006-001 | Flat Washer (8.4 mm) | |
11-051744-001 | Locknut (8 mm) | |
47-014058-003 | N.A. Lever | |
11-052691-001 | Rolled Pin (10 mm x 26 mm) | |
47-014059-004 | Bearing Bolt | |
11-051745-001 | Locknut (10 mm) | |
47-022410-003 | Round Belt Pulley | |
47-014054-003 | V-Belt Adaptor Pulley | |
11-051028-001 | Hex Hd. Machine Screw (6 mm x 25 mm) | |
11-052008-001 | Flat Washer (6.4 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
11-051852-001 | Retaining Ring (17 mm) | |
47-013930-004 | Threaded Rod (older version) | |
47-013916-004 | Rod End Adaptor | |
11-051793-001 | Cotter Pin (2 mm x 16 mm) | |
11-052028-001 | Flat Washer (10.5 mm) | |
11-051703-001 | Hex Nut (10 mm) | |
47-014053-001 | Elevator Belt Tensioner Assembly | |
47-014718-004 | S.O. Threaded Rod (newer version) | |
47-021291-001 | N.A. Frame | |
11-051786-001 | Split Pin (2.5 mm x 25 mm) | |
11-052036-001 | Flat Washer (15 mm) | |
47-020942-003 | Roller | |
47-020943-004 | Roller Bushing | |
11-053577-000 | Rubber Bumper (6 mm Thread) | |
11-052023-001 | N.A. Flat Washer (6.4 mm) | |
11-052048-001 | R.O. Flat Washer (6.4 mm) | |
11-052048-001 | Flat Washer (6.4 mm) | |
11-051705-001 | Hex Nut (14 mm) | |
11-051773-001 | N.A. Lockwasher (14 mm) | |
47-020896-004 | Leg (70 mm) | |
47-023671-004 | N.A. Leg (90 mm) | |
47-023672-004 | N.A. Leg (140 mm) | |
47-023673-004 | N.A. Leg (160 mm) Complete | |
47-862794-000 | Front Board Complete | |
47-862789-000 | N.A. Middle Board Complete | |
47-862788-000 | Rear Board Complete | |
47-022038-004 | N.A. Rear Spacer Wedge | |
47-022037-004 | Middle Spacer Wedge | |
47-022036-004 | Front Spacer Wedge | |
11-051541-001 | Socket Hd. Cap Screw (8 mm x 30 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
11-051525-001 | N.A. Socket Hd. Cap Screw (8 mm x 45 mm) | |
11-051516-001 | N.A. Socket Hd. Cap Screw (8 mm x 35 mm) | |
11-051744-001 | Locknut (8 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
11-052611-001 | N.A. Carriage Bolt (8 mm x 40 mm) | |
47-022105-003 | Bracket (front) | |
47-022106-003 | Bracket (middle) | |
11-052601-001 | Carriage Bolt (8 mm x 30 mm) | |
11-052006-001 | Flat Washer (8.4 mm) | |
11-053581-000 | Transport Band Belt (2450 mm x 1440 mm) | |
47-020908-003 | End Cap w/Bearings 2 Stud - Rear Roller only | |
47-020908-444 | N.A. End Cap w/Bearings 2 Stud - Front Roller only | |
47-021351-004 | Spacer Bushing | |
11-051744-001 | Locknut (8 mm) | |
11-052017-001 | Flat Washer (8.4 mm) | |
11-052682-001 | Rolled Pin (3 mm x 26 mm) | |
47-021350-004 | Spacer Bushing | |
47-022412-003 | Pulley | |
47-020915-004 | Screw | |
47-021441-002 | Roller Assembly Complete (front) | |
47-023669-002 | S.O. Roller Assembly Complete (rear) - long pit | |
47-021352-004 | Shaft (rear Roller) | |
47-021353-004 | Shaft (front Roller) | |
47-022291-004 | N.A. R.H. Deflector Board | |
47-021273-004 | N.A. L.H. Deflector Board | |
47-022055-003 | N.A. R.H. Deflector Board | |
47-022434-003 | N.A. L.H. Deflector Board | |
11-051744-001 | Locknut (8 mm) | |
11-052601-001 | Carriage Bolt (8 mm x 30 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
11-051010-001 | Hex Hd. Cap Screw (8 mm x 20 mm) | |
11-052019-001 | Flat Washer (8.4 mm) | |
47-021310-002 | N.A. Deflector Plate (7 pin side) | |
47-021311-002 | N.A. Deflector Plate (10 pin side) | |
47-022290-002 | N.A. Deflector Plate (7 pin side) | |
47-022289-002 | N.A. Deflector Plate (10 pin side) | |
11-051017-001 | Hex Hd. Cap Screw (8 mm x 90 mm) | |
11-052003-001 | Flat Washer (8.4 mm) | |
47-023922-002 | N.A. R.H. Transport Band Side Frame Complete (8 mm Rubber Wellnut Mount) | |
47-024735-002 | N.A. R.H. Transport Band Side Frame Complete (8 mm Welded Nut) | |
47-024735-009 | R.O. R.H. Transport Band Side Frame Complete (10 mm) | |
47-023923-002 | N.A. L.H. Transport Band Side Frame Complete (8 mm Rubber Wellnut Mount) | |
47-024736-002 | N.A. L.H. Transport Band Side Frame Complete (8 mm Welded Nut) | |
47-024736-009 | R.O. L.H. Transport Band Side Frame Complete (10 mm) | |
47-020942-003 | Roller | |
47-020943-004 | Roller Bushing | |
11-051858-001 | Retaining Ring (15 mm) | |
11-052053-001 | N.A. Flat Washer (17 mm) | |
47-861011-001 | R.O. Flat Washer (17 mm) Pkg. of 10 | |
11-051565-009 | Socket Hd. Machine Screw (10 mm x 110 mm) | |
11-051569-009 | R.O. Socket Hd. Machine Screw (M10 x 120 mm) Pkg. of 10 | |
11-051745-001 | Lock Nut (10 mm) | |
47-026370-009 | Spacer Bushing (21 mm) - Qty. of 2 "47-276153-009",Side Frame Repair Kit (contains 1 Repair Nut "47-276153-000",and 1 screw "11-052930-000" | |
11-135400-000 | Rubber Well Nut (8 mm, machine series 43 to 76) | |
11-051045-001 | Hex Hd. Machine Screw (10 mm x 30 mm) | |
47-023981-002 | Roller Assembly Complete, (front) 3 Stud End Cap - Replaces 2 Stud End Cap Roller Assembly | |
47-860013-000 | Pkg. O-Rings (Qty. of 4) | |
47-020908-003 | End Cap w/Bearing (2 Stud Front rollers Only) | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-051744-001 | Locknut (8 mm) | |
47-023933-004 | Shaft - Front | |
47-023982-004 | N.A. Spacer Bushing (13.5 mm) | |
47-026371-009 | R.O. Spacer Bushing (13.5 mm) - Qty. of 2 | |
11-052676-001 | Roll Pin (3 mm x 30 mm) | |
11-635201-000 | Transport Band Carpet (2020 mm x 1440 mm) | |
11-635201-100 | Certified Transport Band Belt | |
47-025051-001 | Odd Lane Short Roller Assembly Complete (rear) See index 21, page 13B | |
47-024905-001 | Even Lane Short Roller - Assembly Complete (rear) See index 22, page 13B | |
47-024094-003 | Housing | |
11-430055-000 | Deep Groove Ball Bearing | |
47-024093-004 | Threaded Rod (10 mm x 140 mm) | |
11-052050-001 | Flat Washer (10.5 mm) | |
47-024309-004 | Spring | |
11-051703-001 | Hex Nut (10 mm) | |
11-051853-001 | Retaining Ring (20 mm) | |
47-023959-003 | Front Board Assembly Complete | |
11-052019-001 | Flat Washer (8.4, GS-92) | |
47-025175-003 | L.H. Rear Board Assembly - Complete (odd lane) | |
47-025176-003 | R.H. Rear Board Assembly - Complete (even lane) | |
11-053909-000 | V Belt (10 mm x 6 mm x mm) - use with 110 mm pulley 11- 053910-000 V-Belt (10 mm x 6 mm x 2650 mm) use with 125 mm pulley | |
47-024330-004 | V-Belt Pulley (110 mm) | |
47-025049-004 | V-Belt Pulley (125 mm) | |
47-023915-004 | Rubber Spacer | |
11-051746-001 | Locknut (3 mm) | |
11-052401-001 | Sltd. Pan Hd. Machine Screw (8 mm x 50 mm) | |
11-052402-001 | N.A. Sltd. Pan Hd. Machine Screw (8 mm x 60 mm | |
47-861018-001 | R.O. Sltd. Pan Hd. Machine Screw (8 mm x 60 mm, Pkg. of 10 | |
47-023663-004 | Rubber Washer (3 mm x mm x 8 mm) | |
11-052150-001 | Finishing Washer (8 mm) | |
47-274332-002 | Bearing Block Repair Kit | |
11-051770-001 | Lock Washer (8 mm) | |
11-051743-001 | Hex Nut (6 mm) | |
11-052064-001 | N.A. Flat Washer (15 mm) | |
47-025178-003 | Bearing (3-stud) | |
11-051902-001 | Retaining Ring (52 mm) | |
11-051561-001 | Hex Head Cap Screw (3 mm x 30 mm) | |
47-276153-009 | Side Frame Repair Kit (contains 1 Repair Nut | |
47-276153-000 | and 1 screw "11-052930-000" | |
11-052930-000 | N.A. Screw - See index 48 | |
47-276153-000 | N.A. Repair Nut - see index 48 | |
47-276153-009 | Side Frame Repair Kit (contains 1 Repair Nut "47-276153-000" and 1 screw"11-052930-000" | |
47-024743-003 | Reinforcement Bracket | |
11-052930-000 | Screw Socket Flat Head (M10 x 60 mm) | |
11-052931-000 | N.A. Screw Scoket Flat Head (M10 x 70 mm) | |
47-024739-004 | Rubber Washer | |
47-024740-004 | Finish Washer | |
11-052025-001 | Flat Washer (10.5 mm x mm x 2 mm) | |
47-024735-009 | R.H. Transport Band Side Frame Complete | |
47-024736-009 | L.H. Transport Band Side Frame Complete | |
47-020942-003 | Roller | |
47-020943-004 | Roller Bushing | |
11-051858-001 | Retaining Ring (15 mm) | |
47-861011-001 | Flat Washer (17 mm) Pkg. of 10 | |
11-051565-009 | Socket Hd. Machine Screw (10 mm x 110 mm) | |
11-051569-009 | R.O. Socket Hd. Machine Screw (M10 x 120 mm) Pkg. of 10 | |
11-051745-001 | Lock Nut (10 mm) | |
11-054225-000 | N.A. Bearing w/Conical Insert - See index 24 | |
47-276153-000 | N.A. Repair Nut - see index 46 | |
11-051045-001 | Hex Hd. Machine Screw (10 mm x 30 mm) | |
47-023981-002 | Roller Assembly Complete, (front) 3 Stud End Cap - Replaces 2 Stud End Cap Roller Assembly | |
47-860013-000 | Pkg. O-Rings (Qty. of 4) | |
47-020908-003 | End Cap w/Bearing (2 Stud Front rollers Only) | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-051744-001 | Locknut (8 mm) | |
47-023933-004 | Shaft - Front | |
47-026371-009 | Spacer Bushing (13.5 mm) - Qty. of 2 | |
11-052676-001 | Roll Pin (3 mm x 30 mm) | |
11-635201-000 | Transport Band Carpet (2020 mm x 1440 mm) | |
11-635201-100 | Certified Transport Band Belt | |
47-025051-001 | Odd Lane Short Roller Assembly Complete (rear) | |
47-024905-001 | Even Lane Short Roller Assembly Complete (rear) | |
47-024094-003 | Housing | |
11-430055-000 | Deep Groove Ball Bearing | |
47-024093-004 | Threaded Rod (10 mm x 140 mm) | |
11-052050-001 | Flat Washer (10.5 mm) | |
47-024309-004 | Spring | |
11-051703-001 | Hex Nut (10 mm) | |
11-051853-001 | Retaining Ring (20 mm) | |
47-023959-003 | Front Board Assembly Complete | |
47-024741-004 | Flat Washer (10.5 mm) | |
47-025175-003 | L.H. Rear Board Assembly - Complete (odd lane) | |
47-025176-003 | R.H. Rear Board Assembly - Complete (even lane) | |
11-053909-000 | V Belt (10 mm x 6 mm x mm) - use with 110 mm pulley | |
47-025049-004 | V-Belt Pulley (125 mm) | |
47-023915-004 | Rubber Spacer | |
11-051746-001 | Locknut (3 mm) | |
11-052929-000 | Socket Flat Hd. S.S. Screw (10 mm x 50 mm) | |
11-052930-000 | Socket Flat Hd. Cap Screw S.S. (10 mm x 60 mm) | |
47-861042-001 | Rubber Washers (Pkg of 10) | |
11-052150-001 | "47-024740-004",Finishing Washer (5.3 mm x 28 mm x 10.2 mm) | |
47-274332-002 | Bearing Block Repair Kit | |
11-051770-001 | Lock Washer (10 mm) | |
11-050326-001 | Rivot Nut | |
11-052064-001 | N.A. Flat Washer (15 mm) | |
47-861014-001 | R.O. Pkg. of 10 Flat Washer (15 mm) | |
47-025178-003 | Bearing (3-stud) | |
11-051902-001 | Retaining Ring (52 mm) | |
11-051561-001 | Hex Head Cap Screw (3 mm x 30 mm) | |
47-026370-009 | Spacer Bushing (21 mm) - Qty. of 2 | |
11-051743-001 | Hex Nut (6 mm) | |
47-276153-009 | Side Frame Repair Kit (contains 1 each index 51 and index 52) | |
11-052930-000 | N.A. Screw Socket Flat Headsee index 50 | |
47-276153-000 | N.A. Repair Nut - see index 50 | |
47-024006-003 | Support Bracket | |
11-051006-001 | Hex Hd. Machine Screw (10 mm x 50 mm) | |
11-052028-001 | Flat Washer (10.5 mm) | |
11-051046-001 | Hex Hd. Machine Screw (10 mm x 80 mm) | |
11-053153-001 | Hex Jam Nut (10mm) | |
47-023999-002 | Lever | |
47-023998-004 | Shaft | |
11-430028-000 | Bearing | |
11-054450-000 | Self-Tapping Screw (6 mm x 16 mm) | |
47-013956-003 | V-Belt Pulley for 2560 or 2650 mm V-Belt | |
11-051852-001 | Retaining Ring (17mm) | |
47-093863-003 | Round Belt Pulley for 12 or 15 mm Polycord | |
47-093874-004 | Pulley Clamp | |
47-024037-004 | Shaft | |
11-053616-001 | Stop Collar (15 mm) | |
11-052801-001 | Set Screw (6 mm x 6 mm) | |
47-094326-004 | Flange | |
11-052027-001 | Flat Washer (17 mm) | |
11-052048-001 | Flat Washer (6.4 mm) | |
47-023977-001 | Transport Band Belt Tensioner Assembly - Complete (left machine) | |
47-274660-009 | Tensioner Shaft Retrofit Kit | |
11-053501-000 | Key (5 mm x 5 mm x 25 mm) | |
47-024838-004 | Polycord Belt (15 mm dia.) | |
47-024838-005 | Polycord Belt (15 mm dia. x 7 m) | |
47-024006-003 | Support Bracket | |
11-051006-001 | Hex Hd. Machine Screw (10 mm x 50 mm) | |
11-052028-001 | Flat Washer (10.5 mm) | |
11-051046-001 | Hex Hd. Machine Screw (10 mm x 80 mm) | |
11-053153-001 | Hex Nut (10 mm) | |
47-024007-003 | Pivot Arm | |
47-092415-003 | Round Belt Pulley for 12 mm or 15 mm polycord | |
47-024004-003 | V-Belt Pulley for 2560 mm or 2650 mm V-Belt | |
11-051002-001 | Hex Hd. Machine Screw (5 mm x 30 mm) | |
11-051742-001 | Locknut (5mm) | |
11-052005-001 | Flat Washer (5.3 mm) | |
11-051852-001 | Retaining Ring (17 mm) | |
47-024037-004 | Shaft | |
11-053616-001 | Stop Collar (15 mm) | |
11-052801-001 | Set Screw (6 mm x 6 mm) | |
47-023980-001 | R.H Machine Transport Band Belt Tensioner Assembly Complete | |
47-024838-004 | N.A. Polycord Belt (15 mm) | |
47-024838-005 | R.O. Polycord Belt (15 mm x 7 mm) | |
11-053909-000 | V Belt (10 mm x 6 mm x 2560 mm) - use with 110 mm pulley | |
11-053910-000 | V-Belt (10 mm x 6 mm x 2650 mm) - use with 125 mm pulley | |
47-020953-004 | Stop Collar | |
99-010108-004 | Bearing | |
47-021466-001 | Bearing Block | |
11-051706-001 | Hex Nut (12 mm) | |
11-052024-001 | N.A. Flat Washer (13 mm) | |
47-861010-001 | R.O. Flat Washer (13 mm) Pkg. of 20 | |
11-051772-001 | Lockwasher (12 mm) | |
11-051564-009 | Socket Hd. Cap Screw (12 mm x 60 mm) | |
11-051012-001 | Hex Hd. Cap Screw (10 mm x 70 mm) | |
11-052050-001 | Flat Washer (10.5 mm) | |
11-051771-001 | Lockwasher (10 mm) | |
11-051703-001 | Hex Nut (10 mm) | |
47-020948-003 | Transverse Bar | |
47-024077-003 | Transverse Bar (short pit) | |
11-051058-001 | Hex Hd. Cap Screw (10 mm x 55 mm) | |
47-021009-002 | Pulley Holder | |
11-051786-001 | Split Pin (2.5 mm x 25 mm) | |
11-051014-001 | Hex Hd. Cap Screw (6 mm x 45 mm) | |
11-052012-001 | Flat Washer (18 mm) | |
11-052048-001 | Flat Washer (6.4 mm) | |
11-051743-001 | Locknut (6 mm) feed distributors) | |
47-022098-004 | Hydraulic Protector Plate | |
11-051704-001 | Hex Nut (8 mm) | |
47-021489-004 | Short Spacer | |
11-051052-001 | Hex Hd. Cap Screw (10 mm x 45 mm) | |
11-051879-001 | N.A. Truss Hd. Machine Screw (6 mm x 20 mm) | |
47-861007-001 | R.O. Truss Hd. Machine Screw (6 mm x 20 mm) Pkg. of 5 | |
11-053578-000 | Rubber Bumper - male (8 mm) | |
47-025639-009 | Ball Cushion Frame w/Bracket (for both R.H. and L.H. machines) | |
47-274888-009 | Cushion Flap Kit Complete | |
99-020402-002 | N.A. Cushion Flap Assembly | |
99-026121-000 | R.O. Hydraulic Ball Cushion Assembly | |
11-051013-001 | Hex Hd. Cap Screw (10 mm x 90 mm) | |
47-021110-004 | Spacer | |
47-021120-004 | Mounting Plate | |
47-020947-003 | Bearing Block | |
47-021318-003 | Wood Shim (10 mm) | |
11-051745-001 | Locknut (10 mm) | |
47-025045-009 | R.H. Ball Cushion Board w/Facing (even lane) | |
47-021872-003 | Top Ball Cushion Board | |
11-052618-001 | Carriage Bolt (10 mm x 50 mm) | |
47-025044-009 | L.H. Ball Cushion Board w/Facing (odd lane) | |
11-052603-001 | Carriage Bolt (8 mm x 45 mm) | |
47-026102-009 | AP Impact Strips (Qty. 2) | |
47-021010-003 | Impact Strip (Black) (Qty. 1) | |
11-051055-001 | Hex Hd. Cap Screw (8 mm x 60 mm) | |
47-021195-002 | Pulley Holder Complete | |
11-051744-001 | Locknut (8 mm) | |
11-052018-001 | Flat Washer (10.5 mm) | |
47-022410-003 | Pulley w/Bearing | |
47-021112-004 | Bushing | |
11-051515-001 | Socket Hd. Cap Screw (6 mm x 18 mm) | |
11-051702-001 | Hex Nut (6 mm) | |
47-021488-004 | Long Spacer Assembly odd lane Complete Assembly even lane Complete | |
47-274281-009 | Ball Cushion Repair Kit | |
47-024276-004 | Rubber Head Screws | |
47-023660-004 | Cap | |
47-021119-004 | Special Round Top Nut (12 mm) | |
11-052015-001 | Flat Washer (13 mm) lane) | |
99-020402-002 | N.A. Ball Cushion Hydraulic - Complete (all GS Pinsetters) | |
99-026121-000 | R.O. Ball Cushion Hydraulic Assembly | |
47-021108-004 | Spacer (used in new and old Shock) | |
11-055351-000 | Sealing Ring (all GS Shocks) | |
47-071602-004 | Compression Spring | |
47-025637-003 | Bracket | |
47-025638-004 | Spacer | |
11-051010-001 | Hex Head Cap Screw (8 mm x 20 mm) | |
11-052003-001 | Flat Washer (8 mm) | |
11-055015-001 | Starlock Washer (8 mm) | |
47-245788-003 | N.A. Ground Strap - only 47245788-009 Ground Strap Kit includes mounting hardware | |
47-092332-003 | N.A. R.H. Overflow Chute Complete (long pit version) | |
47-095186-009 | N.A. R.H. Overflow Chute Complete (short pit version) - see page 6C | |
47-095740-009 | R.O. R.H. Overflow Chute w/o Sock | |
11-051043-001 | N.A. Hex Hd. Cap Screw (8 mm x 12 mm) | |
11-052361-001 | Pan Hd. Machine Screw (5 mm x 12 mm) | |
11-051744-001 | Locknut (8 mm) | |
11-051742-001 | Locknut (5 mm) | |
11-052019-001 | Flat Washer (8.4 mm) | |
11-052039-001 | Fender Washer (5.3 mm) | |
11-603301-000 | Overflow Chute Clamp | |
47-862780-000 | N.A. Chute Clamp Kit (consists of 10 clamps only - no banding) | |
47-097509-000 | OEM Overflow Pin Sock | |
47-092529-000 | N.A. Sock (White) | |
47-092529-600 | Sock - heavy duty (White) | |
47-022531-000 | N.A. Sock (Black) | |
47-092333-003 | N.A. L.H. Overflow Chute Complete (long pit version) | |
47-095187-009 | N.A. L.H. Overflow Chute Complete (short pit version) - see page 6C | |
47-095739-009 | R.O. L.H. Overflow Chute w/o Sock | |
47-092298-003 | Sock Brace Only | |
47-092527-000 | Pin Wipe | |
47-092310-004 | Felt (for Sock Brace) | |
47-092448-004 | Felt (for inside wall, long pit version) | |
47-094073-004 | Felt (for inside wall, short pit version) | |
47-092449-004 | Felt (for bottom, long pit version) | |
47-094075-004 | N.A. Felt (for bottom, short pit version) | |
47-092450-004 | Felt (for outside wall, long pit version) | |
47-094076-004 | Felt (for outside wall, short pit version) | |
47-093749-004 | Bracket | |
47-094355-004 | Bracket | |
11-053575-000 | Rubber Mount | |
47-094356-004 | Mounting Plate | |
47-094357-003 | Plate | |
11-053585-000 | Rubber Bumper | |
11-052928-001 | Countersunk Screw (6 mm x 10 mm) | |
11-052048-001 | Flat Washer (6.4 mm) | |
11-051743-001 | Locknut (6 mm) | |
11-052369-001 | Pan Hd. Machine Screw (5 mm x 16 mm) | |
11-051011-001 | Hex Hd. Cap Screw (8 mm x 50 mm) | |
11-052006-001 | Flat Washer (8.4 mm) | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
11-051030-001 | Hex Hd. Cap Screw (5 mm x 20 mm) | |
11-052039-001 | Flat Washer (5.3 mm) | |
11-051742-001 | Locknut (5 mm) | |
11-051744-001 | Locknut (8 mm) | |
11-051043-001 | Hex Hd. Cap Screw (8 mm x 12 mm) | |
47-097509-000 | OEM Overflow Pin Sock | |
47-022531-000 | N.A. Sock (Black) | |
47-092529-600 | Sock - heavy duty (White) | |
11-603301-000 | Overflow Chute Clamp | |
47-095739-009 | L.H. Plastic Chute | |
47-095740-009 | R.H. Plastic Chute | |
47-095080-004 | Support Bracket | |
47-093937-003 | N.A. L.H. Chute Assembly | |
47-095739-009 | R.O. L.H. Chute Assembly w/o Sock | |
47-093938-003 | N.A. R.H. Chute Assembly | |
47-095740-009 | R.O. R.H. Chute Assemblyw/o Sock | |
47-860003-000 | Pin Wipe | |
47-093749-004 | Chute Bracket | |
47-021084-004 | Curtain | |
47-021088-002 | Pit Curtain Holder | |
11-051533-001 | Socket Hd. Cap Screw (8 mm x 25 mm) | |
11-051744-001 | Locknut (8 mm) | |
11-051015-001 | Hex Hd. Cap Screw (8 mm x 25 mm) | |
11-052006-001 | Flat Washer (8.4 mm) | |
11-051745-001 | Locknut (10 mm) | |
11-051055-001 | Hex Head Cap Screw (8 mm x 60 mm) | |
47-021196-002 | Pit Curtain Assembly Complete | |
11-051770-001 | Lockwasher (8 mm) | |
11-051004-001 | N.A. Hex Hd. Cap Screw (5 mm x 25 mm) | |
47-861001-001 | R.O. Hex Hd. Cap Screw (5 mm x 25 mm) Pkg. of 10 | |
11-052039-001 | Flat Washer (5.3 mm) | |
11-051744-001 | Locknut (8 mm) | |
11-051035-001 | Hex Hd. Cap Screw (6 mm x 16 mm) | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
47-097509-000 | OEm Overflow Pin Sock | |
47-022531-000 | N.A. Sock (Black) | |
47-092529-600 | Sock - heavy duty (White) | |
11-603301-000 | Overflow Chute Clamp | |
47-095738-001 | L.H. Plastic Chute - only | |
47-095737-001 | R.H. Plastic Chute - only | |
47-095728-004 | Angle Bracket | |
47-095740-009 | R.H. Chute Assembly w/out Sock | |
47-095739-009 | L.H Chute Assembly w/out Sock | |
11-053587-000 | Rubber Bumper (25 mm x 15mm) | |
11-051742-001 | Locknut (5 mm) | |
47-095727-004 | Pressure Plate | |
11-051743-001 | Locknut (6 mm) | |
47-095726-004 | Mounting Plate | |
11-053588-000 | Rubber Bumper (30 mm x 20 mm) | |
47-093749-004 | Bracket | |
47-095729-004 | Mounting Bracket | |
11-052938-001 | Flat Hd. Screw (8 mm x 12 mm) | |
47-860003-000 | Pin Wipe | |
47-275731-009 | Overflow Chute Conversion Kit (contains index numbers: 2, 3, 4, 5, 10, 12, 14, 15, 16, 17, 19 and ) | |
47-021476-001 | Ball Accelerator Box | |
11-051019-001 | Hex Hd. Cap Screw (10 mm x 25 mm) | |
11-052018-001 | Flat Washer (10.5 mm) | |
47-021249-004 | Ball Cushion Stop | |
11-051745-001 | Locknut (10 mm) | |
47-021057-003 | Ball Door Protector Ring | |
47-021481-003 | Fiber Plate (small) | |
47-021619-002 | Protector Wedge - 10 pin side | |
47-021620-002 | Protector Wedge - 7 pin side | |
11-051543-001 | Socket Hd. Cap Screw (10 mm x 20 mm) | |
11-051771-001 | Lockwasher (10 mm) | |
11-051551-001 | Socket Hd. Cap Screw (10 mm x 45 mm) | |
47-021618-002 | Protector Wedge (lower) | |
11-051512-001 | Socket Hd. Cap Screw (10 mm x 35 mm) | |
11-052454-001 | N.A. Flat Hd. Machine Screw (6 mm x 16 mm) | |
11-051743-001 | Locknut (6 mm) | |
47-021480-003 | N.A. Fiber Plate (large) | |
47-021478-003 | Retaining Plate | |
47-023950-002 | N.A. Ladder (short pit) | |
47-085967-009 | R.O. Ladder | |
47-023593-003 | Guard Plate | |
11-051744-001 | Locknut (8 mm) | |
11-051010-001 | Hex Hd. Cap Screw (8 mm x 20 mm) | |
47-031479-004 | Retaining Plate Bracket | |
11-052031-001 | Flat Washer (9 mm) | |
11-052017-001 | Washer (8.4 mm) | |
47-035305-009 | S.O. Ball Accelerator Box (complete) | |
47-035240-001 | L.H. Ball Door Protector Plate - 10 pin side | |
47-035241-001 | R.H. Ball Door Protector Plate - 7 pin side (shown) | |
11-055800-000 | EJOT Plastic Fastener (Nut Plate) | |
11-054466-000 | EJOT Plastic Fastener Screw (25 mm x 60 mm) | |
11-052008-001 | Flat Washer (6.4 mm) | |
11-054460-000 | N.A. EJOT Screw (60 mm x 50 mm) | |
11-054466-000 | R.O. Torx Head Self Tap Screw (60 mm x 25 mm) | |
47-035239-004 | Axle Wedge | |
47-035220-003 | Front Accelerator Mount Bracket w/Pin | |
11-051019-001 | Hex Hd. Cap Screw (10 mm x 25 mm) | |
11-051745-001 | Locknut (10 mm) | |
11-052018-001 | Flat Washer (10.5 mm) | |
47-035219-003 | Rear Ball Rod Assembly Mount w/Pin | |
11-052020-001 | Flat Washer (5.3 mm) | |
11-051742-001 | Locknut (5 mm) | |
11-052933-001 | Countersunk Screw (5 mm x 12 mm) | |
47-021249-004 | Ball Cushion Stop | |
11-051743-001 | Locknut (6 mm) | |
47-025751-004 | Stop Bracket | |
11-051744-001 | Hex Nut (8 mm) | |
99-020434-004 | Rubber Bumper (30 x 20) | |
11-054805-001 | Button Hd. Socket Screw (10 mm x 25 mm) | |
47-035228-003 | Mount Bracket | |
47-245788-003 | Ground Strap - only 47245788-009 Ground Strap Kit includes mounting hardware | |
11-055015-001 | Starlock Washer (8 mm) | |
11-052003-001 | Flat Washer (8 mm) | |
11-051010-001 | Hex Head Cap Screw (8 mm x 20 mm) | |
47-035224-003 | N.A. Front Support Left Hand | |
47-035223-003 | N.A. Front Support Right Hand | |
47-031455-001 | N.A. Ball Accelerator Frame | |
47-275705-009 | R.O. Ball Accelerator Frame (208/230V) | |
47-275706-009 | N.A. Ball Accelerator Pkg. (380V) | |
47-031248-004 | Tension Spring | |
47-031440-003 | Tension Bar | |
11-051703-001 | Hex Nut (10 mm) | |
11-053501-000 | Key (5 mm x 5 mm x 25 mm) | |
47-031454-002 | Pivoting Lever | |
47-031456-004 | Axle | |
11-052926-001 | Flat Hd. Cap Screw (10 mm x 20 mm) | |
11-051045-001 | Hex HD. Cap Screw (10 mm x 30 mm) | |
11-051745-001 | Locknut (10 mm) | |
10-635127-000 | Flat Belt | |
47-035232-002 | Front Driving Drum Complete - Spacers not included | |
47-035234-004 | Spacer - needed when replacing Driving Drum (2 each) | |
47-035064-099 | Rear Driving Drum Complete - spacers not included | |
47-035234-004 | Spacer - needed when replacing Driving Drum (2 each) | |
11-051015-001 | Hex Hd. Cap Screw (8 mm x mm) | |
11-052028-001 | Flat Washer (10.5 mm) | |
11-052017-001 | Flat Washer (8.4 mm) | |
11-051744-001 | Locknut (8 mm) | |
11-052017-001 | Flat Washer (8.4 mm) | |
47-862787-000 | Protective Cover (Pkg. of 4) | |
11-052609-001 | N.A. Carriage Bolt (8 mm x 100 mm) | |
47-861021-001 | R.O. Carriage Bolt (8 mm x 100 mm) Pkg. of 5 | |
11-680925-000 | N.A. Strain Relief | |
11-055080-000 | R.O. Strain Relief | |
68-100192-000 | N.A. Cable Assembly | |
47-142614-000 | Cable Assembly (GS Consolidated Electronics) | |
47-031309-001 | Ball Rod | |
53-520634-001 | Transition Track (GS Accelerators to Return Track) | |
11-051045-001 | Hex Hd. Cap Screw (10 mm x 30 mm) | |
11-051771-001 | Lockwasher (10 mm) | |
11-052018-001 | Flat Washer (10.5 mm) | |
47-031261-004 | Spacer | |
11-053577-000 | Rubber Bumper (6 mm Thread) | |
11-051028-001 | Hex Hd. Cap Screw (6 mm x 25 mm) | |
11-051702-001 | Hex Nut (6 mm) | |
47-031603-003 | Motor Mounting Bracket | |
11-051769-001 | Lockwasher (6 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
47-031604-004 | Shaft | |
11-051805-001 | Split Pin (2.5 mm x 20 mm) | |
47-031307-004 | Angle Bracket | |
11-051743-001 | Locknut (6 mm) | |
99-010123-004 | Bushing | |
47-031453-004 | Spring Bracket | |
99-020163-004 | Spring | |
47-033867-004 | Motor Drive Pulley | |
11-053904-000 | V-Belt (10 mm x 6 mm x 950 mm, 50Cy, export only) | |
11-053907-000 | V-Belt (10 mm x 6 mm x 925 mm) 60Cy - domestic only) | |
11-052804-001 | Set Screw (16 mm x 8 mm) | |
11-051018-001 | Hex Hd. Cap Screw (6 mm x 20 mm) | |
11-052048-001 | Flat Washer (6.4 mm) | |
99-040113-002 | N.A. Ball Accelerator Motor (1/2 H.P., 230VAC/380VAC) | |
99-076363-000 | R.O. Distributor Motor (1/2 H.P., 240/400VAC) w/Integral Brake | |
99-040295-004 | N.A. Accelerator Motor (1/2 H.P., 208VAC) | |
99-076362-000 | R.O. Distributor Motor (208VAC, 0.37kW) | |
47-032500-004 | Ball Stop (for welded configuration) | |
47-032125-003 | Guard Bracket | |
47-032126-003 | Ball Stop | |
47-033504-004 | Flat Belt Guard Complete | |
11-052610-001 | N.A. Carriage Belt (6 mm x 20 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
47-022519-000 | N.A. Ball Wipe w/Sleeve | |
47-022519-002 | N.A. Sleeve only | |
47-030924-003 | Drive Disc | |
47-035236-003 | Tension Rod | |
47-035226-002 | Motor Support Bracket | |
11-051071-000 | Hex Head Cap Screw (10 mm x 60 mm) | |
11-052050-001 | Flat Washer (10.5) | |
11-051745-001 | Locknut (10 mm) | |
11-052019-001 | Flat Washer (8.4) | |
11-051704-001 | Nut (8 mm) | |
47-035600-004 | Terminal Box w/Cable | |
47-862787-000 | Protective Cover - Pkg. of 4 | |
99-030363-004 | Accelerator Motor/Rear Drive Drum Assembly w/Cable (208/230/380 VAC) | |
47-031248-004 | Tension Spring | |
11-052018-001 | Flat Washer (10.5 mm) | |
11-051020-001 | N.A. Hex Head Screw (M8 x 150 mm) | |
47-031454-002 | Pivot Lever | |
47-035232-002 | Front Driving Drum Complete - spacers not included | |
47-035234-004 | Spacer - needed when replacing Driving Drum Complete (2 each) | |
10-635127-000 | Flat Belt | |
47-035230-004 | Axle | |
53-520634-001 | Metric Transition Track (GS Accelerators to Return Track) | |
47-035600-004 | Terminal Box | |
11-051771-001 | Lockwasher (10 mm) | |
47-035303-009 | S.O. Ball Rod w/Cover | |
47-035225-003 | Bracket (locking mechanism) | |
47-035211-001 | Bottom Accelerator Plate | |
47-035229-002 | Front Bracket | |
47-035228-003 | Rear Bracket | |
11-051093-001 | Mounting Screw (10 mm x 75 mm) | |
47-035214-004 | N.A. Spacer | |
47-860014-000 | R.O. Spacer (Qty. of 5) | |
11-051045-001 | Hex Hd. Cap Screw (10 mm x 30 mm) | |
11-051078-001 | N.A. Hex Hd. Cap Screw (10 mm x 40 mm) | |
47-035344-004 | Shim Plate | |
47-035231-002 | N.A. Holder for Roll Lever | |
47-035601-001 | S.O. Drive Frame - Complete | |
47-035235-003 | N.A. Bracket | |
47-035351-003 | Accelerator Plate | |
47-031054-002 | Ball Door | |
11-051018-001 | Hex Hd. Cap Screw (6 mm x 20 mm) | |
11-051743-001 | Locknut (6 mm) | |
11-051793-001 | Cotter Pin (2 mm x 16 mm) | |
11-051067-001 | Hex Hd. Cap Screw (8 mm x 35 mm) | |
11-430046-000 | Bearing | |
11-051060-001 | Hex Hd. Cap Screw (6 mm x 70 mm) | |
11-051061-001 | Hex Hd. Cap Screw (8 mm x 75 mm) | |
47-031090-004 | Support Brace | |
47-031058-001 | Arm - all GS pinsetters - see note | |
11-051008-001 | Hex Hd. Cap Screw (6 mm x 10 mm) | |
11-051744-001 | Locknut (8 mm) | |
47-031822-004 | Lever | |
47-031056-003 | L.H. Ball Door Key | |
47-031055-003 | R.H. Ball Door Key | |
47-034767-004 | Tension Spring | |
47-031091-004 | Shaft | |
11-053478-001 | N.A. Speed Nut (8 mm) | |
47-861050-000 | R.O. Speed Nut (8 mm) Pkg. of 10 | |
47-031302-004 | Ball Door Shaft (Pre GS-X Pinsetters) | |
47-034843-004 | Shaft - Threaded End | |
11-053477-001 | Speed Nut (7 mm) | |
11-053616-001 | Stop Collar (15 mm) | |
11-052807-001 | Set Screw (6 mm x 12 mm) | |
47-031797-002 | Locking Bolt | |
47-031800-004 | Pivot Link | |
11-053480-001 | Speed Nut (10 mm) | |
99-060133-004 | Plunger Only | |
11-051021-001 | Hex Hd. Cap Screw (10 mm x 35 mm) | |
11-052028-001 | Flat Washer (10.5 mm) | |
11-051745-001 | Locknut (10 mm) | |
47-031796-002 | Holder | |
11-051742-001 | Locknut (5 mm) | |
11-680116-000 | Connector - Male | |
99-060219-004 | Solenoid Assembly Complete (red box) | |
11-051068-001 | Hex Hd. Cap Screw (5 mm x 65 mm) | |
11-052039-001 | Flat Washer (5.3 mm) | |
47-031801-004 | Connecting Link | |
11-051791-001 | Split Pin (1.6 mm x 10 mm) | |
47-031799-004 | Tension Spring | |
47-031798-004 | Connecting Stud | |
47-031802-004 | Lever | |
47-033558-009 | R.H. Locking Mechanism Complete | |
47-033557-009 | L.H. Locking Mechanism | |
47-243030-004 | N.A. Solenoid Assembly Complete (silver box, consolidated box, and nexgen electronics) | |
99-070356-004 | R.O. Solenoid Assembly | |
47-033556-009 | R.H. Ball Door with Arm Complete 7 Pin Side, R.H. Even Lane (shown) | |
47-033555-009 | L.H. Ball Door with Arm Complete 10 Pin Side L.H. Odd Lane (not shown) | |
47-030276-004 | Ball Door Arm Tension Spring | |
11-054301-001 | N.A. Hitch Pin (3 mm x 62 mm) | |
47-861032-001 | R.O. Hitch Pin (3 mm x 62 mm) Pkg. of 10 | |
11-680302-000 | N.A. Terminal - Male | |
57-860032-000 | R.O. Terminal - Male (Pkg. of 10) | |
11-680301-000 | N.A. Terminal - Female | |
57-860031-000 | R.O. Terminal - Female (Pkg. of 20) | |
11-680216-000 | Connector - Female | |
11-055253-001 | Special Lockwasher (6 mm) | |
11-053157-001 | Jam Nut (14 mm) | |
47-035238-004 | Ball Door Shaft (GS-X Pinsetters) | |
11-054463-000 | N.A. EJOT Self Tapping Screw (KB30 x 7 mm) | |
47-034842-004 | Bushings | |
47-042058-002 | Sweep Wagon Frame only (uses Leaf Springs) | |
47-041769-003 | Sweep Board Only (brown for GS-10, GS-92 or GS-96) | |
47-041721-002 | Gutter Adapter | |
47-041636-004 | Protection Strip | |
47-041750-004 | Spacer | |
47-041751-004 | Protector | |
46-040170-004 | Roller | |
99-040249-004 | Plastic Roller Assembly | |
47-041737-004 | Retaining Flat Spring | |
47-041734-004 | Flat Spring | |
47-041735-004 | Flat Spring | |
47-041736-004 | Flat Spring | |
47-041738-004 | Flat Spring | |
11-051013-001 | Hex Hd. Cap Screw (10 mm x 90 mm) | |
11-051745-001 | Locknut (10 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
47-041774-004 | Bracket | |
47-041526-003 | N.A. R.H. Pusher Rod | |
47-042056-003 | L.H. Pusher Rod (shown) | |
11-052608-001 | Carriage Bolt (8 mm x 150 mm) | |
11-051792-001 | Split Pin (3.2 mm x 28 mm) | |
11-052607-001 | Carriage Bolt (6 mm x 45 mm) | |
11-052037-001 | Flat Washer (6.4 mm) | |
11-051743-001 | Locknut (6 mm) | |
11-051744-001 | Locknut (8 mm) | |
11-052006-001 | Flat Washer (8.4 mm) | |
11-051852-001 | Retaining Ring (17 mm) | |
11-052012-001 | Flat Washer (18 mm) | |
11-051747-001 | Locknut (12 mm) | |
11-052024-001 | N.A. Flat Washer (13 mm) | |
47-861010-001 | R.O. Flat Washer (13 mm) Pkg. of 20 | |
11-051070-001 | Hex Hd. Cap Screw (12 mm x 60 mm) | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-052034-001 | Flat Washer (15 mm) | |
11-054103-001 | Spacer Washer (16 mm) | |
99-010103-004 | Plastic Bearing | |
47-041637-001 | Sweep Wagon Assembly Complete | |
47-042545-000 | N.A. Sweep Board Decal (GS-10) | |
47-044692-004 | N.A. Sweep Board Decal (GS-92) | |
47-044801-004 | Sweep Board Decal (GS-96) | |
47-045082-004 | Sweep Board Decal (GS-98) | |
47-045373-004 | Sweep Board Decal (GS-X) | |
47-044802-009 | Sweep Board w/Felt (Brown) | |
47-044927-003 | Sweep Board only (Gray) | |
47-043772-004 | Felt only | |
46-040170-004 | Roller | |
11-052053-001 | Flat Washer (17 mm) | |
47-044927-003 | Sweep Board Only (gray for GS-98, or GS-X) | |
47-041721-002 | Gutter Adapter | |
99-040249-004 | Plastic Roller Assembly | |
47-041774-004 | Bracket | |
47-041526-004 | R.H. Pusher Rod | |
47-042056-003 | L.H. Pusher Rod | |
11-051745-001 | Locknut (10 mm) | |
11-051747-001 | Locknut (12 mm) | |
11-052024-001 | N.A. Flat Washer (13 mm) | |
47-861010-001 | R.O. Flat Washer (13 mm) Pkg of 20 | |
11-051070-001 | Hex Hd. Cap Screw (12 mm x 60 mm) | |
11-051010-001 | Hex Hd. Cap Screw (8 mm x 20 mm) | |
11-052019-001 | Flat Washer (8.4 mm) | |
47-045082-004 | Sweep Board Decal (GS-98) | |
47-045373-004 | Sweep Board Decal (GS-X) | |
47-044802-009 | Sweep Board w/Felt (Brown) | |
47-044979-004 | Rubber Bumper | |
11-051770-001 | Lockwasher (8 mm) | |
11-052034-001 | Flat Washer (15 mm) | |
99-010103-004 | Plastic Bearing | |
11-051869-000 | Retaining Ring (15 mm) | |
11-052614-001 | Carriage Bolt (6 mm x 40 mm) | |
11-052601-001 | Carriage Bolt (8 mm x 30 mm) | |
11-052035-001 | Flat Washer (10.5 mm) | |
11-051744-001 | Locknut (8 mm) | |
47-045010-002 | Sweep Wagon (Frame only) | |
47-044976-004 | Felt only | |
46-040170-004 | Roller | |
11-052053-001 | N.A. Flat Washer (17 mm) | |
47-861011-001 | R.O. Flat Washer (17 mm) Pkg of 10 | |
11-051852-001 | Retaining Ring (17 mm) | |
47-044978-004 | Foot Cap - see index 33 | |
47-045013-009 | S.O. Sweep Wagon - Complete | |
11-054103-001 | N.A. Shim Washer (16 mm) | |
47-861029-001 | R.O. Shim Washer (16 mm x 28 mm x .5 mm) Pkg. of 10 | |
11-051786-001 | Cotter Pin | |
47-862011-000 | GS Sweep Foot Cap Upgrade Kit (includes 25 fastening pins, drill bit and instructions). Kit does not include foot caps and should be ordered as needed. | |
47-045566-009 | Sweep Release/Holder Complete (for Tower Down machine) | |
11-051509-001 | Socket Hd. Cap Screw (6 mm x 12 mm) | |
11-051518-001 | Socket Hd. Cap Screw (10 mm x 40 mm) | |
47-041786-003 | Yoke | |
11-601005-000 | Chain - Master Link Included (21 Link -Tower Up Machine) | |
47-045487-004 | Chain - Master Link Included (25 Link -Tower Down Machine) | |
11-051743-001 | Locknut (6 mm) | |
11-051745-001 | Locknut (10 mm) | |
99-060219-004 | Solenoid Assembly Complete (red box) | |
99-060133-004 | Plunger Only | |
11-051063-001 | N.A. Hex Hd. Cap Screw (5 mm x 65 mm) | |
47-861002-001 | R.O. Hex Hd. Cap Screw (5 mm x 65 mm) Pkg. of 20 | |
11-052039-001 | Flat Washer (5.3 mm) | |
11-051742-001 | Locknut (5 mm) | |
47-041793-001 | Arm | |
47-041792-004 | Tension Spring | |
47-041787-003 | Spring Holder | |
47-041976-004 | Tie Plate | |
11-053480-001 | Speed Nut (10 mm) | |
11-051791-001 | Split Pin (1.6 mm x 10 mm) | |
47-045140-004 | Connecting Link | |
47-041791-004 | Tension Spring | |
47-043790-004 | Plastic Tube (12/16 x 12) | |
11-053478-001 | N.A. Speed Nut (8 mm) | |
47-861050-000 | R.O. Speed Nut (8 mm) Pkg. of 10 | |
47-041783-003 | Tipper | |
47-041790-004 | Tension Spring | |
11-052025-001 | Flat Washer (4.3 mm) | |
47-045139-004 | Connecting Link w/Starlock | |
47-041784-004 | Lever | |
47-041788-002 | Swing Lever | |
11-430006-000 | N.A. Bearing | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-054103-001 | Spacer Washer (16 mm) | |
47-040260-003 | Sweep Guide Lever Pivot | |
47-040283-003 | Sweep Guide Lever | |
11-052024-001 | N.A. Flat Washer (13 mm) | |
47-861010-001 | R.O. Flat Washer (13 mm) Pkg. of 10 | |
11-051807-001 | Cotter Pin (2 mm x 20 mm) | |
47-243030-004 | N.A. Solenoid Assembly | |
99-070356-004 | R.O. Solenoid | |
11-052028-001 | Flat Washer (10.5 mm) | |
47-041814-003 | Holder | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-051744-001 | Locknut (8 mm) | |
47-243027-004 | Switch (silver box, consolidated and nexgen) Switch Assembly | |
47-043698-004 | Top Shaft | |
47-041816-001 | Guide Hook | |
99-040151-004 | Connector Joint | |
11-053101-000 | Set Screw (6 mm x 8 mm) | |
11-053616-001 | Stop Collar (15 mm) | |
47-041813-004 | Bushing | |
11-053480-001 | Speed Nut (10 mm) | |
47-081654-004 | Tension Spring | |
11-051772-001 | Lockwasher (12 mm) | |
11-053154-001 | Jam Nut (12 mm) | |
99-040400-002 | N.A. Sweep Attenuator Hydraulic Complete | |
99-046122-000 | R.O. Hydraulic Sweep Wagon Assembly | |
47-041812-004 | Bottom Shaft (130 mm) | |
11-051787-001 | Split Pin (2 mm x 25 mm) | |
11-051703-001 | Hex Nut (10 mm) | |
11-051771-001 | Lockwasher (10 mm) | |
11-051538-001 | Socket Hd. Cap Screw (10 mm x 50 mm) | |
11-052035-001 | Flat Washer (10.5 mm) | |
47-043583-004 | Spacer | |
99-050230-004 | Switch (red box) | |
11-052206-001 | Cap Screw (4 mm x 25 mm) | |
11-051741-001 | Locknut (4 mm) | |
47-045372-003 | Holder Support | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-051744-001 | Locknut (8 mm) | |
47-243027-004 | Switch Assembly (silver box, consolidated and nexgen) | |
47-045551-004 | Top Shaft | |
47-041816-001 | Guide Hook | |
99-040151-004 | Connector Joint | |
11-053101-000 | Set Screw (6 mm x 8 mm) | |
11-053616-001 | Stop Collar (15 mm) | |
47-041813-004 | Bushing | |
11-053480-001 | Speed Nut (10 mm) | |
47-081654-004 | Tension Spring | |
11-051772-001 | Lockwasher (12 mm) | |
11-053154-001 | Jam Nut (12 mm) | |
99-040400-002 | N.A. Sweep Attenuator Hydraulic Complete | |
99-046122-000 | R.O. Hydraulic Sweep Wagon Assembly | |
47-045484-004 | Bottom Shaft (130 mm) | |
11-054300-001 | Cotter Pin (2 mm) | |
11-054301-001 | N.A. Hitch Pin (3 mm x 25 mm) | |
11-051703-001 | Hex Nut (10 mm) | |
11-051771-001 | Lockwasher (10 mm) | |
11-051538-001 | Socket Hd. Cap Screw (10 mm x 50 mm) | |
11-052035-001 | Flat Washer (10.5 mm) | |
47-043583-004 | Spacer | |
99-050230-004 | Switch (red box) | |
11-052206-001 | Cap Screw (4 mm x 25 mm) | |
11-051741-001 | Locknut (4 mm) | |
11-051861-000 | Retaining Ring (18 mm) | |
47-051635-001 | Geared Rack | |
11-051880-001 | N.A. Truss Hd. Machine Screw (6 mm x 16 mm) | |
47-861008-001 | R.O. Truss Hd. Machine Screw (6 mm x 16 mm) Pkg. of 10 | |
11-052008-001 | Flat Washer (6.4 mm) | |
11-051743-001 | Locknut (6 mm) | |
47-051625-004 | Shaft Support | |
11-051855-001 | Retaining Ring (10) | |
11-051878-001 | Truss Hd. Machine Screw (8 mm x 45 mm) | |
47-052021-004 | Spacer Bushing | |
47-052020-004 | Gear | |
47-052022-004 | Spacer Ring | |
99-050230-004 | Switch Complete (red box) | |
47-051616-004 | Gear | |
47-051617-004 | Spacer Bushing | |
47-071615-004 | Square Shaft Gear | |
11-430048-000 | Bearing | |
47-051682-004 | Stop | |
11-051744-001 | Locknut (8 mm) | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-051028-001 | Hex Hd. Cap Screw (6 mm x 25 mm) | |
47-051633-004 | Spacer Bushing | |
47-051632-004 | Gear | |
47-051634-004 | Holder | |
11-051877-001 | Truss Hd. Machine Screw (6 mm x 25 mm) | |
11-052037-001 | Flat Washer (6.4 mm) | |
11-052362-001 | Sltd. Pan Hd. Machine Screw (5 mm x 20 mm) | |
11-051742-001 | Locknut (5 mm) | |
11-052353-001 | N.A. Sltd. Pan Hd. Machine Screw (4 mm x 16 mm) | |
47-861017-001 | R.O. Sltd. Pan Hd. Machine Screw (4 mm x 16 mm) Pkg. of 20 | |
11-052021-001 | Flat Washer (4.3 mm) | |
11-051741-001 | Locknut (4 mm) | |
47-051875-001 | Setting Table Frame | |
11-051707-001 | Hex Nut (16 mm) | |
11-051774-001 | Lockwasher (16 mm) | |
47-051565-002 | Toothed Rack (front) | |
47-053513-009 | Toothed Rack Complete (center) | |
11-052209-001 | Sltd. Pan Hd. Screw (4 mm x 16 mm) | |
47-054279-004 | Conduit Clamp | |
47-052396-004 | Cable Channel | |
47-052395-003 | Plug Holder Bracket | |
47-052425-003 | Cable Channel | |
47-052423-003 | Cable Channel | |
47-052424-003 | Cable Channel | |
11-051085-001 | N.A. Hex Hd. Cap Screw (8 mm x 45 mm) | |
47-861003-001 | R.O. Hex Hd. Cap Screw (8 mm x 45 mm) Pkg. of 10 | |
11-051770-001 | Lockwasher (8 mm) | |
47-243027-004 | Switch Complete (silver, consolidated and nexgen electronics box) | |
99-050330-003 | N.A. Bracket Only | |
47-051203-004 | Plug Holder | |
47-051522-004 | Cable Guide | |
47-051261-004 | Stiffening Plate | |
11-050301-000 | Countersunk Hd. Rivet | |
11-051509-001 | Socket Hd. Cap Screw (6 mm x 12 mm) | |
47-053812-004 | Switch Protector | |
11-051769-001 | Lockwasher (6 mm) | |
11-053661-000 | N.A. Rivet (3.2 mm x 9.5 mm) | |
11-053660-000 | N.A. Rivet (3.2 x 7.4 mm) | |
47-861025-000 | R.O. Blind Rivet (3.2 mm x 7.4 mm) Pkg. of 20 | |
47-243025-003 | Setting Table Harness Complete (silver box, 4-pin connector) | |
47-051635-001 | Geared Rack | |
11-051880-001 | N.A. Truss Hd. Machine Screw (6 mm x 16 mm) | |
47-861008-001 | R.O. Truss Hd. Machine Screw (6 mm x 16 mm) Pkg. of 10 | |
11-052008-001 | Flat Washer (6.4 mm) | |
11-051743-001 | Locknut (6 mm) | |
47-051625-004 | Shaft Support | |
11-051855-001 | Retaining Ring (10 mm) | |
11-051878-001 | Truss Hd. Machine Screw (8 mm x 45 mm) | |
47-052021-004 | Spacer Bushing | |
47-052020-004 | Gear | |
47-052022-004 | Spacer Ring | |
47-055347-004 | Spring Holder Bracket | |
47-051616-004 | Gear | |
47-051617-004 | Spacer Bushing | |
47-071615-004 | Square Shaft Gear | |
11-430048-000 | Bearing | |
47-051682-004 | Stop | |
11-051744-001 | Locknut (8 mm) | |
11-052019-001 | Flat Washer (8.4 mm) | |
11-051877-001 | Truss Hd. Machine Screw (6 mm x 25 mm) | |
47-051633-004 | Spacer Bushing | |
47-051632-004 | Gear | |
47-051634-004 | Holder | |
11-051877-001 | Socket Hd. Machine Screw (6 mm x 25 mm) | |
11-052037-001 | Flat Washer (6.4 mm | |
11-052362-001 | Sltd. Pan Hd. Machine Screw (5 mm x 20 mm) | |
11-051742-001 | Locknut (5 mm) | |
11-052353-001 | N.A. Sltd. Pan Hd. Machine Screw (4 mm x 16 mm) | |
47-861017-001 | R.O. Sltd. Pan Hd. Machine Screw (4 mm x 16 mm) Pkg. of 20 | |
11-052021-001 | Flat Washer (4.3 mm) | |
11-051741-001 | Locknut (4 mm) | |
47-055177-001 | Setting Table Frame | |
11-051707-001 | Hex Nut (16 mm) | |
11-051774-001 | Lockwasher (16 mm) | |
47-051565-002 | Toothed Rack (front) | |
47-053513-009 | Toothed Rack Complete (center) | |
11-051060-001 | Hex Head Cap Screw (6 mm x 70 mm) | |
11-052209-001 | Sltd. Pan Hd. Machine Screw (4 mm x 16 mm) | |
47-054279-004 | Conduit Clamp | |
47-245164-001 | Setting Table Harness - complete | |
11-053661-000 | N.A. Rivet (3.2 mm x 9.5 mm) | |
47-055169-003 | Cable Channel - short | |
47-055170-003 | Cable Channel - long | |
47-243027-004 | Switch - complete (silver box, consolidated and nexgen) | |
99-050330-003 | N.A. Bracket Only | |
11-050301-000 | Countersunk Head Rivet | |
47-053812-004 | Switch Protector | |
11-053660-000 | N.A. Pop Rivet (3.2 mm x 7.4 mm) | |
47-861025-000 | R.O. Blind Rivet (3.2 mm x 7.4 mm) Pkg. of 20 | |
47-055166-009 | GS-X Setting Table Assembly - Complete (includes Pinholders, Spotting Tongs, and Cables) | |
47-051621-003 | Base | |
47-055138-004 | Connecting Link w/Speed Nuts | |
11-053476-001 | Speed Nut | |
47-051782-004 | Tension Spring | |
11-052017-001 | Flat Washer (8.4 mm) | |
47-275620-009 | Setting Table Repair Kit | |
47-055167-003 | Cable Guide | |
47-861052-000 | Cable Guide Clips, Pkg of 10 - (not shown) | |
47-055137-004 | Connecting Link - only | |
47-055127-004 | Drive Shaft | |
47-055150-009 | Drive Shaft - Assembly | |
47-055151-004 | Pin | |
11-430046-000 | Bearing | |
11-051854-000 | Retaing Ring (8 mm) | |
47-055605-004 | Bearing Plate | |
11-051522-001 | Socket Head Cap Screw (M5 x 16 mm) | |
11-051742-001 | Locknut(5 mm) | |
47-051674-004 | Latch | |
47-051658-002 | No. 1 Swing Shaft | |
47-052240-004 | Table Spring | |
99-010124-004 | Bearing | |
47-041813-004 | Bushing | |
11-053480-001 | Speed Nut (10 mm) | |
47-051660-004 | Pivot Lever | |
11-052678-001 | Rolled Pin (5 mm x 36 mm) | |
11-052801-001 | Set Screw (6 mm x 6 mm) | |
11-051851-001 | Retaining Ring (12 mm) | |
11-054101-001 | N.A. Spacer Washer | |
47-051657-002 | No. 2 Swing Shaft | |
47-051656-002 | No. 3 Swing Shaft | |
47-051655-002 | No. 4 Swing Shaft | |
11-051545-001 | N.A. Socket Hd. Cap Screw (12 mm x 70 mm) | |
47-861010-001 | R.O. Socket Hd. Cap Screw (12 mm x 70 mm) Pkg. of 20 | |
11-052024-001 | Flat Washer (13 mm) | |
47-051681-004 | Spacer | |
11-051706-001 | Hex Nut (12 mm) | |
11-052032-001 | Flat Washer (13 mm) | |
11-051012-001 | Hex Hd. Cap Screw (10 mm x 70 mm) | |
46-050305-004 | Bearing | |
11-053619-001 | Stop Collar (20 mm) | |
11-051514-001 | Socket Hd. Cap Screw (6 mm x 16 mm) | |
11-051702-001 | Hex Nut (6 mm) | |
11-051027-001 | Hex Hd. Cap Screw (5 mm x 40 mm) | |
11-051701-001 | Hex Nut (5 mm) | |
47-073534-004 | Switch (red box) | |
11-053352-001 | Pan Hd. Screw (3 mm x 20 mm) | |
11-052055-001 | N.A. Flat Washer (3.2 mm) | |
47-861013-001 | R.O. Flat Washer (3.2 mm) Pkg. of 20 | |
11-051746-001 | Locknut (3 mm) | |
47-081654-004 | Tension Spring | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-051010-001 | Hex Hd. Cap Screw (8 mm x 20 mm) | |
11-051744-001 | Locknut (8 mm) | |
11-051001-001 | Hex Hd. Cap Screw (6 mm x 12 mm) | |
11-051769-001 | Lockwasher (6.1 mm) | |
47-082398-004 | Table Jam Switch Actuator Arm | |
47-082397-003 | Switch Plate | |
47-082324-003 | N.A. Bracket | |
47-082329-004 | N.A. Table Jam Switch Actuator Spring Bracket | |
47-082331-004 | N.A. Nut Plate | |
47-082323-001 | Table Jam Switch Assembly Complete | |
47-051295-004 | Roller | |
47-243028-004 | Switch (silver, consolidated and nexgen electronics box) | |
11-052209-001 | Slotted Cheese Head Screw (4 mm x 16 mm) | |
11-052021-001 | Flat Washer (4.3 mm) | |
47-054279-004 | Conduit Clamp | |
11-051741-001 | Locknut (4 mm) | |
47-055116-003 | One-Piece Connecting Rod | |
47-055316-002 | Shaft Assembly | |
47-055318-002 | Shaft Assembly | |
47-055324-002 | Shaft Assembly | |
47-055326-002 | Shaft Assembly | |
11-051007-001 | Hex Hd. Cap Screw (6mm x 40 mm) | |
47-055321-003 | Spring Bracket | |
47-052240-004 | Tension Spring | |
47-041813-004 | Bushing | |
47-071162-004 | Spacer Bushing | |
11-053480-001 | Speed Nut (10 mm) | |
47-054997-003 | Pin | |
47-055002-002 | Link Assembly | |
11-051851-000 | Retaining Ring | |
11-052024-001 | N.A. Flat Washer (13 mm) | |
47-861010-001 | R.O. Flat Washer (13 mm) Pkg. of 20 | |
47-051295-004 | Roller | |
11-051522-001 | Socket Hd. Cap Screw (5 mm x 16 mm) | |
11-051701-001 | Hex Nut (5 mm) | |
46-050305-004 | Plastic Bearing | |
47-055009-004 | Stop Collar | |
47-054992-002 | Lever | |
47-054991-001 | Lever | |
47-055320-003 | Wedge (large) | |
47-055319-003 | Wedge (small) | |
47-054989-001 | Lever (7-10 pin) | |
47-054993-001 | Lever | |
47-054990-001 | Lever | |
11-051054-001 | Hex Head Cap Screw (8 mm x 60 mm) | |
47-055332-004 | Channel Cover (1030 mm) | |
11-051743-001 | Lock Nut (6 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
11-051026-001 | Hex Head Cap Screw (8 mm x 40 mm) | |
47-055327-001 | Cable Support/Holder | |
11-055900-001 | Square Nut (8 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
11-052003-001 | Flatwasher (8.4 mm) | |
11-051515-001 | Socket Hd. Cap Screw (6 mm x 18 mm) | |
11-053616-001 | Stop Collar (15 mm) | |
11-052801-001 | Set Screw (6 mm x 6 mm) | |
11-052048-001 | Flat Washer (6.4 mm) | |
11-052036-001 | Flat Washer (15 mm) | |
47-081650-004 | Roller Lever | |
47-081651-004 | N.A. Roller Wheel | |
11-051786-001 | Cotter Pin (2.5 mm x 25 mm) | |
47-081652-004 | Roller Shaft | |
11-051743-001 | Locknut (6 mm) | |
47-081649-002 | Cam | |
47-081654-004 | Tension Spring | |
47-080744-004 | Shaft | |
47-081771-004 | N.A. Switch Bracket | |
99-050230-004 | Switch w/Connector Complete | |
11-052201-001 | N.A. Slotted Machine Screw (4 mm x 10 mm) | |
11-052025-001 | Flat Washer (4.3 mm) | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
11-052351-001 | Sltd. Pan Hd. Machine Screw (6 mm x 55 mm) | |
47-051760-003 | Gear | |
47-051755-003 | Connector | |
47-053767-003 | Connector | |
11-053479-001 | Speed Nut (9 mm) | |
47-051762-004 | Connecting Link | |
47-051759-004 | Pivot Wing | |
47-053783-004 | Pivot Wing | |
11-053478-001 | N.A. Speed Nut (8 mm) | |
47-861050-000 | R.O. Speed Nut (8 mm) Pkg. of 10 | |
47-051761-004 | Shaft | |
47-051758-003 | Damper | |
47-051757-003 | Tong | |
47-053782-003 | Tong | |
47-051756-004 | N.A. Deck Plate | |
47-054902-002 | R.O. | |
11-052355-001 | Sltd. Pan Hd. Machine Screw (5 mm x 55 mm) | |
11-052048-001 | Flat Washer (6.4 mm) | |
11-051743-001 | Locknut (6 mm) | |
11-052005-001 | Flat Washer (5.3 mm) | |
11-051742-001 | Locknut (5 mm) 10) | |
47-051575-004 | Pin Stop - GS98 | |
11-053478-001 | N.A. Speed Nut (8 mm) | |
47-861050-000 | R.O. Speed Nut (8 mm) Pkg. of 10 | |
47-054896-002 | R.H.Tong | |
47-055148-002 | L.H. Tong | |
47-051771-600 | Double Damper Oversized Pkg. of 10 | |
47-051770-600 | Double Damper - Standard Pkg. of 10 | |
47-051758-003 | OEM Standard Damper | |
47-051758-600 | Urethane Damper - Oversized Pkg. of 10 | |
47-051758-500 | PCV Damper - Oversized Pkg. of 10 | |
47-055117-009 | Spotting Tong - Complete Assembly (Location 1, 4, 5, and 6) | |
47-055118-009 | Spotting Tong - Complete Assembly (Location 2, 3, 7, 8, 9, and 10) | |
47-054902-002 | Deck Plate | |
47-054898-003 | Spotting Tong Pivot (Locations 1, 4, 5 and 6) | |
47-054897-003 | Spotting Tong Pivot (Locations 2, 3, 7, 8 and 9) - 10 shown | |
11-054459-000 | Self Tapping, Torx Screw (K60 x 16 mm) | |
47-051762-004 | Connecting Link | |
47-054900-003 | Lever (locations 1, 4, 5, 6) | |
47-054901-003 | Lever (locations 2, 3, 7, 8, 9) - 10 shown | |
47-054899-003 | Gear | |
47-052124-004 | Counter Weight | |
47-050640-004 | Tension Spring | |
47-050665-003 | Switch Finger | |
47-052440-004 | R.H. Pin Gripper | |
47-052439-004 | L.H. Pin Gripper | |
11-052681-001 | Roll Pin (3 mm x 16 mm) | |
11-052677-001 | Roll Pin (2 mm x 16 mm) | |
47-050675-004 | Ground Shaft | |
11-051767-001 | N.A. Lockwasher (4 mm) - red box only | |
11-053776-001 | C.R. Pan Hd. Screw (4 mm x 8 mm) - red box only | |
47-050668-004 | Switch Finger Shaft | |
11-053476-001 | Speed Nut (4 mm) | |
47-050308-004 | Damper | |
47-054689-009 | Pin Holder w/Dampers | |
11-051535-001 | Socket Hd. Cap Screw (8 mm x 40 mm) | |
47-050676-004 | Bracket | |
11-051770-001 | Lockwasher (8 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
47-052418-004 | Cherry Switch (red box only) | |
11-051708-001 | Hex Nut (2.5 mm) | |
11-052203-001 | Sltd. Machine Screw (2.5 mm x 20 mm) | |
11-051766-001 | Lockwasher (2.5 mm) | |
11-052041-001 | Flat Washer (2.7 mm) | |
11-052051-001 | Flat Washer (2.5 mm) | |
47-050639-004 | Switch Spring | |
11-053475-001 | Speed Nut (3 mm) | |
47-050674-004 | Shaft | |
47-050670-004 | Switch Finger | |
11-052205-001 | Slotted Machine Screw (2.5 mm x 8 mm) | |
47-050671-004 | N.A. Roller Bushing | |
47-050670-004 | R.O. Switch Finger | |
11-051802-001 | Split Pin (1 mm x 10 mm) | |
11-052025-001 | Flat Washer (4.3 mm) | |
46-050300-004 | Catch | |
47-050036-001 | N.A. Pin Holder Complete (red box electrical system) | |
47-053850-009 | Pin Holder Complete (universal electrical system) | |
47-050266-004 | Connector Link | |
99-060218-004 | Solenoid Complete (red box) | |
46-050302-004 | Tension Spring | |
47-050677-004 | N.A. Shaft | |
11-053478-001 | N.A. Speed Nut (8 mm) | |
47-861050-000 | R.O. Speed Nut (8 mm) Pkg of 10 | |
11-054776-001 | N.A. C.R. Pan Hd. Screw (5 mm x 60 mm) | |
47-861037-001 | R.O. C.R. Pan Hd. Screw (5 mm x 60 mm) Pkg. of 10 | |
11-052039-001 | Flat Washer (5.3 mm) w/Rubber (metal) | |
47-054298-001 | R.O. Pin Detector Plate w/Pin (plastic) (4 mm x 10 mm) | |
99-060208-004 | Plunger | |
99-060242-004 | Solenoid Complete (silver, consolidated and nexgen electronics box) | |
47-053635-004 | Cherry Switch (silver, consolidated and nexgen electronics box) | |
11-680302-000 | N.A. Terminal (silver box & universal) | |
57-860032-000 | R.O. Terminal - Male (Pkg. of 10) | |
11-680105-000 | N.A. Connector - 4 Pin (silver box & universal) | |
11-697187-000 | Terminal (red box) box) | |
11-051809-001 | N.A. Split Pin (2 mm) | |
11-052003-001 | N.A. Flat Washer (8.4 mm) | |
11-052003-001 | R.O. Flat Washer (8.4 mm) | |
11-053401-001 | N.A. Snap Ring (8 mm) | |
47-860005-000 | Pivot Pin (Pkg. of 10) | |
11-051088-001 | Hex Hd. Cap Screw (6 mm x 35 mm) | |
47-054708-004 | Pin Deflector Spring | |
11-051743-001 | Lock Nut (6 mm) | |
47-052124-004 | Counter Weight | |
47-050640-004 | Tension Spring | |
47-050665-003 | Switch Finger | |
47-052440-004 | R.H. Pin Gripper | |
47-052439-004 | L.H. Pin Gripper | |
11-052681-001 | Roll Pin (3 mm x 16 mm) | |
47-054298-001 | Pin Detector Plate w/Pin | |
47-050675-004 | Ground Shaft | |
47-860005-000 | Pivot Pin (Pkg. of 10) | |
11-053776-001 | C.R. Pan Hd. Screw (4 mm x 8 mm) - red box only | |
47-050668-004 | Switch Finger Shaft | |
11-053476-001 | Speed Nut (4 mm) | |
47-050308-004 | Damper | |
47-054689-009 | Pin Holder w/Dampers | |
11-051535-001 | Socket Hd. Cap Screw (8 mm x 40 mm) | |
47-050676-004 | Bracket | |
11-051770-001 | Lockwasher (8 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
47-053635-004 | Micro Switch (single, cherry) | |
47-054700-004 | Micro Switch (double) | |
11-051708-001 | Hex Nut (2.5 mm) | |
11-052220-001 | Sltd. Machine Screw (2.5 mm x 30 mm) | |
11-051766-001 | Lockwasher (2.5 mm) | |
11-052041-001 | Flat Washer (2.7 mm) | |
11-051743-001 | Lock Nut (6 mm) | |
47-050639-004 | Switch Spring | |
11-053475-001 | Speed Nut (3 mm) | |
47-054701-004 | Shaft | |
47-054703-004 | Switch Finger | |
11-055150-000 | Slotted Machine Self Tap Screw Plastic (2.5 mm x 5 mm) | |
47-054702-004 | Switch Finger | |
11-054776-001 | N.A. C.R. Pan Hd. Screw (5 mm x 60 mm) | |
47-861037-001 | R.O. C.R. Pan Hd. Screw (5 mm x 60 mm) Pkg. of 10 | |
11-054500-000 | N.A. Grip Ring (4 mm) | |
47-861036-000 | R.O. Grip Ring (4 mm) Pkg. of 10 | |
46-050300-004 | Catch | |
47-054699-009 | Pin Holder Complete | |
47-050266-004 | Connector Link | |
99-060242-004 | Soleniod | |
46-050302-004 | Tension Spring | |
47-054708-004 | Pin Deflector Spring | |
11-051808-001 | N.A. Cotter Pin (1.6 mm x 40 mm) | |
47-861034-001 | R.O. Cotter Pin - Pkg. 20 | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-051088-001 | Hex Hd. Cap Screw (6 mm x 35 mm) | |
99-060208-004 | Plunger | |
47-050308-004 | Damper | |
99-060351-004 | Solenoid - Only | |
47-055323-004 | Micro Switch | |
47-055001-004 | Clip (Micro Switch) | |
47-054983-002 | Drive | |
47-054984-004 | Gear | |
47-055006-004 | Torsion Spring | |
47-054981-002 | N.A. Pin Gripper - Universal (1 piece) | |
47-277156-000 | R.O. Pin Gripper Pkg - Includes index numbers 8a. - Pin Gripper - Left Hand (47-057532-009) 8b. - Pin Gripper - Right Hand (47-057533-009) | |
47-054985-001 | Switch Lever | |
47-054986-004 | Grip Ring | |
47-054988-003 | Switch Button | |
47-055008-004 | Tension Spring | |
47-055004-004 | N.A. Solenoid Plunger - With O-ring groove (requires index number 24) | |
47-057534-000 | R.O. Solenoid Plunger - Without O-ring groove | |
47-054987-004 | Solenoid Spring | |
47-055005-004 | Tension Spring | |
47-054982-002 | Switch Finger | |
47-052124-004 | Counter Weight | |
47-054980-001 | N.A. Pin Holder Housing - Only | |
47-054980-201 | R.O. Pin Holder w/Damper | |
47-055314-009 | N.A. Pin Holder Assembly Complete - does not include index numbers 21, 22, 23, 25, 28, 29, 30, 31,32. | |
47-057535-009 | R.O. | |
47-054298-001 | Pin Detector Plate w/Pin | |
11-051014-001 | Hex Hd. Cap Screw (6 mm x 45 mm) | |
47-055003-004 | Mount Plate | |
11-055500-001 | Hex Nut (6 mm) | |
99-090349-004 | O-Ring for Plunger | |
11-055961-001 | N.A. Washer | |
47-861040-001 | R.O. Washer (6.1 mm) Pkg. of 10 | |
47-860005-000 | Pivot Pin (Pkg. of 10) | |
47-055328-003 | Connector Clip | |
11-680206-000 | Connector - Male (4 pos) | |
11-680302-000 | N.A. Terminal - Male | |
57-860032-000 | R.O. Terminal - Male (Pkg. of 10) | |
11-680301-000 | N.A. Terminal - Female | |
57-860031-000 | R.O. Terminal - Female (Pkg. of 20) | |
11-680118-000 | Connector - Switch (4 pos) | |
47-055785-004 | Steel Mesh | |
11-051706-001 | Hex Nut (12 mm) | |
11-051772-001 | Lockwasher (12 mm) | |
11-052024-001 | N.A. Flat Washer (13 mm) | |
47-861010-001 | R.O. Flat Washer (13 mm) Pkg. of 20 | |
47-071975-004 | Threaded Connector | |
11-600500-000 | Master Link (3 pieces) | |
11-601007-000 | Roller Chain (64 Links) | |
47-050926-004 | Cam | |
11-051743-001 | Locknut (6 mm) | |
11-051509-001 | Socket Hd. Cap Screw (6 mm x 12 mm) | |
47-051490-004 | Cam Holder | |
47-052347-003 | Upper Deck Rack Tube | |
11-052451-001 | Sltd. Flat Ctsk. Hd. Machine Screw (6 mm x 25 mm) | |
11-052679-001 | Rolled Pin (6 mm x 22 mm) | |
47-050365-003 | Toothed Rack (6 mm x 25 mm) | |
11-051518-001 | Socket Hd. Cap Screw (10 mm x 40 mm) | |
11-051771-001 | Lockwasher (10 mm) | |
11-052018-001 | Flat Washer (10.5 mm) | |
47-071162-004 | Spacer Bushing | |
47-071148-004 | Roller | |
47-071170-003 | Roller Support (small) | |
11-051745-001 | Locknut (10 mm) | |
47-071171-003 | Roller Support (large) | |
47-070386-004 | Counter Weight | |
11-051517-001 | Socket Hd. Cap Screw (10 mm x 25 mm) | |
11-051707-001 | Hex Nut (16 mm) | |
11-051748-001 | Locknut (16 mm) | |
11-051774-001 | Lockwasher (16 mm) | |
47-071871-003 | T-Stop | |
47-070401-004 | Threaded Cap | |
11-051703-001 | Hex Nut (10 mm) | |
47-071161-003 | Roller Support Complete | |
47-052346-003 | Deck Rack Tube (lower) | |
11-051770-001 | Lockwasher (8 mm) | |
11-051066-001 | Hex Hd. Cap Screw (8 mm x 18 mm) | |
11-052684-001 | Rolled Pin (5 mm x 40 mm) | |
47-052458-009 | N.A. R.H. Assembly | |
47-052459-009 | N.A. L.H. Assembly | |
47-075474-004 | N.A. Chain Gear | |
47-075474-009 | R.O. Chain Gear w/Set Screws | |
11-051856-001 | Retaining Ring (25 mm) | |
47-011053-004 | Sprocket | |
47-055461-003 | Tube | |
47-085349-003 | Tube Guide | |
11-051707-001 | Hex Nut (16 mm) | |
11-055255-001 | Ribbed Lockwasher (16 mm) | |
47-071171-003 | Roller Support (large) | |
47-071170-003 | Roller Support (small) | |
11-051745-000 | N.A. Locknut (10 mm) | |
11-051074-001 | N.A. Hex Head Cap Screw (10 mm x 45 mm) | |
11-051771-001 | Lockwasher (10 mm) | |
11-051532-001 | Socket Head Cap Screw (10 mm x 30 mm) | |
11-052018-001 | Flat Washer (10.5 mm) | |
47-071162-004 | Spacer Bushing | |
47-071148-004 | Roller | |
47-075553-003 | S.O. Lower Chain Gear w/Bearing Block - Complete | |
47-071871-003 | T-Stop | |
47-070401-004 | Threaded Cap | |
47-070386-004 | Counter Weight | |
47-085436-003 | R.H. Support Bracket | |
47-085430-003 | L.H. Support Bracket | |
11-600500-000 | Master Link (3-pieces) | |
47-055350-004 | Out of Range Cam | |
11-053503-000 | Key (8 mm x 7 mm x 28 mm) | |
47-075476-004 | Shaft | |
11-055158-000 | N.A. Self tapping Screw for Plastic (40 mm x 20 mm) | |
47-073795-004 | Cable Channel (30 mm x 200 mm) | |
47-071779-001 | Gear Train Frame (left-hand) | |
11-051744-001 | Locknut (8 mm) | |
11-051005-001 | Hex Hd. Cap Screw (10 mm x 20 mm) | |
47-070186-003 | Sweep Shaft Support | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
11-051010-001 | Hex Hd. Cap Screw (8 mm x 20 mm) | |
47-073832-004 | Shaft Bearing Assembly w/Cut Retainer Plate | |
47-081958-004 | Sweep Bearing Holder | |
47-223077-004 | Frame Counter Assembly | |
11-051011-001 | Hex Hd. Cap Screw (8 mm x 50 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
11-052901-000 | Bearing Assembly w/Retaining Plates | |
11-051704-001 | Hex Nut (8 mm) | |
11-051703-001 | Hex Nut (10 mm) | |
11-051771-001 | Lockwasher (10 mm) | |
47-070169-004 | Angle Bracket | |
11-051046-001 | Hex Hd. Cap Screw (10 mm x 80 mm) | |
11-052902-000 | Shaft Bearing Assembly w/Retaining Plates | |
11-052003-001 | Flat Washer (8.4 mm) | |
99-010107-004 | Bushing | |
11-053619-001 | Stop Collar (20 mm) | |
11-052803-001 | Set Screw (6 mm x 10 mm) | |
47-040283-003 | Sweep Guide Lever | |
11-051794-001 | Cotter Pin (3.2 mm x 20 mm) | |
11-052024-001 | N.A. Flat Washer (13 mm) | |
47-861010-001 | R.O. Flat Washer (13 mm) Pkg of 20 | |
47-081959-003 | Sweep Shaft Bearing | |
47-041530-002 | Sweep Shaft | |
47-052123-004 | Spring Shaft | |
47-052120-004 | Tension Spring | |
47-073797-004 | Cable Channel (30 mm x 1800 mm) | |
47-084284-004 | Cable Channel 1 meter - (cut to length) | |
47-075452-001 | L.H. Gear Train Frame | |
11-051744-001 | Locknut (8 mm) | |
11-051005-001 | Hex Hd. Cap Screw (10 mm x 20 mm) | |
47-070186-003 | Sweep Shaft Support | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
11-051010-001 | Hex Hd. Cap Screw (8 mm x 20 mm) | |
47-073832-004 | Shaft Bearing Assembly w/Cut Retainer Plate | |
47-081958-004 | Sweep Bearing Holder | |
47-045458-002 | Sweep Shaft | |
11-051011-001 | Hex Hd. Cap Screw (8 mm x 50 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
11-053619-001 | Stop Collar (20 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
11-051703-001 | Hex Nut (10 mm) | |
11-051745-001 | Lock Nut (10 mm) | |
47-070169-004 | Angle Bracket | |
11-051046-001 | Hex Hd. Cap Screw (10 mm x 80 mm) | |
11-052902-000 | Shaft Bearing Assembly w/Retaining Plates | |
11-052003-001 | Flat Washer (8.4 mm) | |
99-010107-004 | Bushing | |
47-081959-003 | Sweep Shaft Bearing | |
11-052024-001 | N.A. Flat Washer (13 mm) | |
47-861010-001 | R.O. Flat Washer (13 mm) Pkg. of 20 | |
47-040283-003 | Sweep Guide Lever | |
11-051794-001 | Cotter Pin (3.2 mm x 20 mm) | |
11-052803-001 | Set Screw (6 mm x 10 mm) | |
99-060219-004 | Solenoid Assembly w/Plug (red box) | |
11-052202-001 | Slotted Machine Screw (5 mm x 55 mm) | |
11-052039-001 | Flat Washer (5.3 mm) | |
99-060133-004 | Plunger | |
47-071865-004 | Connecting Link | |
47-071858-002 | Solenoid Holder | |
11-051742-001 | Locknut (5 mm) | |
11-051745-001 | Locknut (10 mm) | |
47-072023-004 | Cluster Gear | |
11-053478-001 | N.A. Seed Nut (8 mm) | |
47-861050-000 | R.O. Speed Nut (8 mm) Pkg. of 10 | |
47-071859-004 | Pivot Lever Plate | |
47-071866-004 | Tension Spring | |
11-053481-001 | Speed Nut (5 mm) | |
11-052688-001 | N.A. Rolled Pin (3 mm x 18 mm) | |
47-861051-009 | R.O. Roll Pin (Pkg. of 20) | |
47-071883-004 | Clutch Shaft | |
47-071863-004 | Spring Retainer | |
47-071864-004 | Clutch Disc | |
47-071862-004 | Clutch Gear | |
47-071860-004 | Pivot Lever | |
47-071868-004 | Compression Spring | |
47-071869-003 | Spring Tightener | |
47-243030-004 | N.A. Solenoid Assembly w/Plug (silver and consolidated box) | |
99-070356-004 | R.O. Solenoid (Red Box) | |
99-060219-004 | Solenoid Assembly w/Plug (red box) | |
11-052202-001 | Slotted Machine Screw (5 mm x 55 mm) | |
11-052039-001 | Flat Washer (5.3 mm) | |
99-060133-004 | Plunger | |
47-071865-004 | Connecting Link | |
47-075128-002 | Solenoid Holder | |
11-051742-001 | Locknut (5 mm) | |
11-051745-001 | Locknut (10 mm) | |
11-053478-001 | N.A. Speed Nut (8 mm) | |
47-861050-000 | R.O. Speed Nut (8 mm) Pkg. of 10 | |
47-075130-003 | Pivot Lever Plate | |
47-071866-004 | Tension Spring | |
11-052688-001 | N.A. Roll Pin (3 mm x 18 mm) | |
47-861051-009 | R.O. Roll Pin (Pkg. of 20) | |
47-071883-004 | Clutch Shaft | |
47-071863-004 | Spring Retainer | |
47-071864-004 | Clutch Disc | |
47-071862-004 | Clutch Gear | |
47-071868-004 | Compression Spring | |
47-071869-003 | Spring Tightener | |
47-243030-004 | N.A. Solenoid Assembly w/Plug (silver and consolidated box) | |
99-070356-004 | R.O. Solenoid | |
11-053901-000 | V-Belt (10 mm x 6 mm x 875 mm) | |
11-052690-001 | Roll Pin (6 mm x 40 mm) | |
99-070237-002 | Pulley | |
11-051045-001 | Hex Hd. Cap Screw (10 mm x 30 mm) | |
11-051532-001 | Socket Hd. Cap Screw (10 mm x 30 mm) | |
47-073598-009 | Gear and Hub Assembly (new style for all GS machines) | |
11-051745-001 | Locknut (10 mm) | |
47-075076-001 | Bearing Plate | |
47-071823-004 | Sprocket Shaft | |
47-071706-004 | Spacer Bushing | |
11-054102-001 | N.A. Washer (25 mm) | |
47-861028-001 | R.O. Pkg. (Qty.10) Shim Washer | |
11-051856-001 | Retaining Ring (25 mm) | |
11-430051-000 | Bearing | |
47-071705-004 | Pinion Shaft | |
47-075184-003 | Gear Assembly | |
11-051533-001 | Hex Head Cap Screw (8 mm x 25 mm) | |
47-075073-003 | Hub only - Metal | |
47-075072-002 | Gear - only | |
11-052003-001 | Washer (8.4 mm) | |
11-053511-000 | Key (10 mm x 32 mm) | |
11-051533-001 | Hex Head Cap Screws (8 mm x 25 mm) | |
47-071673-004 | Hex Hd. Cap Screw (14 mm x 160 mm) | |
11-051786-001 | Cotter Pin (2.5 mm x 25 mm) | |
47-071507-004 | Shaft | |
11-052036-001 | Flat Washer (15 mm) | |
99-010102-004 | Bushing | |
47-071670-002 | Lever Bushing Support | |
11-051787-001 | Cotter Pin (2 mm x 25 mm) | |
47-071669-002 | Stroke Limiter Plate | |
11-052202-001 | Sltd. Machine Screw (5 mm x 55 mm) | |
11-052020-001 | Flat Washer (5.3 mm) | |
99-060219-004 | Solenoid (red box) Complete | |
11-051742-001 | Locknut (5 mm) | |
11-051791-001 | Cotter Pin (1.6 mm x 10 mm) | |
47-075141-004 | Connecting Link (horizontal mount) order 2 each - Speednut 11-053416-001 | |
11-052025-001 | Flat Washer (4.3 mm) | |
11-051744-001 | Locknut (8 mm) | |
11-051025-001 | Hex Hd. Cap Screw (8 mm x 70 mm) | |
11-052019-001 | Flat Washer (8.4 mm) | |
99-060133-004 | Plunger Only | |
11-051773-001 | N.A. Lockwasher (14 mm) | |
11-051705-001 | Hex Nut (14 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
11-051702-001 | Hex Nut (6 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
47-071509-002 | Guide Beam | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
47-071158-003 | Hydraulic Support | |
11-053624-001 | Stop Collar (18 mm) | |
11-053101-000 | Set Screw (6 mm x 8 mm) | |
47-070311-004 | Shaft (18 mm) | |
11-051010-001 | Hex Hd. Cap Screw (8 mm x 20 mm) | |
11-051014-001 | Hex Hd. Cap Screw (6 mm x 45 mm) | |
47-075142-004 | Connecting Link | |
99-070410-002 | N.A. Hydraulic Shock Absorber Complete | |
99-076123-000 | R.O. Hydraulic Shock Absorber Complete | |
55-050636-004 | Tension Spring | |
47-243030-004 | N.A. Solenoid Complete (silver and consolidated box) | |
99-070356-004 | R.O. Solenoid | |
11-051035-001 | Hex Hd. Cap Screw (6 mm x 16 mm) | |
47-071578-004 | Bearing Block | |
47-071579-004 | Swing Lever | |
47-071680-004 | Connecting Link | |
11-052048-001 | Flat Washer (6.4 mm) | |
11-051743-001 | Locknut (6 mm) | |
47-071602-004 | N.A. Compression Spring (not for use on 99-070410-002 Shocks) | |
11-052003-001 | Flat Washer (8.4 mm) | |
47-070373-004 | Spacer | |
11-052029-001 | Flat Washer (15 mm) | |
11-052208-001 | Adjusting Screw (4 mm x 30 mm) | |
11-051709-001 | Hex Nut (4 mm) | |
11-051767-001 | Lockwasher (4 mm) | |
47-223077-004 | Frame Counter Assembly | |
57-860828-000 | N.A. Frame Counter Kit w/Command Network and LIU | |
47-071673-004 | Hex Hd. Cap Screw (14 mm x 160 mm) | |
11-051786-001 | Cotter Pin (2.5 mm x 25 mm) | |
47-071507-004 | Shaft | |
11-052036-001 | Flat Washer (15 mm) | |
99-010102-004 | Bushing | |
47-071670-002 | Lever Bushing Support | |
11-051787-001 | Cotter Pin (2 mm x 25 mm) | |
47-071669-002 | Stroke Limiter Plate | |
11-052202-001 | Sltd. Machine Screw (5 mm x 55 mm) | |
11-052005-001 | Flat Washer (5.3 mm) | |
99-060219-004 | Solenoid Complete (red box) | |
11-051742-001 | Locknut (5 mm) | |
11-051791-001 | Cotter Pin (1.6 mm x 10 mm) | |
47-075141-004 | Connecting Link (vertical mount) order 2 each - Speed Nut 11-053476-001 | |
11-052025-001 | Flat Washer (4.3 mm) | |
11-051744-001 | Locknut (8 mm) | |
11-051022-001 | Hex Hd. Cap Screw (6 mm x 30 mm) | |
11-052019-001 | Flat Washer (8.4 mm) | |
99-060133-004 | Plunger Only | |
11-051773-001 | N.A. Lockwasher (14 mm) | |
11-051705-001 | Hex Nut (14 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
11-051702-001 | Hex Nut (6 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
47-071509-002 | Guide Beam | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
55-050636-004 | Tension Spring | |
11-051018-001 | Hex Hd. Cap Screw (6 mm x 20 mm) | |
47-071158-003 | Hydraulic Support | |
11-053624-001 | Stop Collar (18 mm) | |
11-052801-001 | Set Screw (6 mm x 6 mm) | |
47-070311-004 | Shaft | |
11-051010-001 | Hex Hd. Cap Screw (8 mm x 20 mm) | |
47-071965-003 | Solenoid Holder | |
11-051014-001 | Hex Hd. Cap Screw (6 mm x 45 mm) | |
99-070410-002 | N.A. Hydraulic Shock Absorber Complete | |
99-076123-000 | R.O. Hydrualic Shock Absorber Complete | |
47-075142-004 | Connecting Link | |
47-243030-004 | N.A. Solenoid Complete (silver box) | |
99-070356-004 | R.O. Solenoid | |
11-051035-001 | Hex Hd. Cap Screw (6 mm x 16 mm) | |
47-071578-004 | Bearing Block | |
47-071579-004 | Swing Lever | |
47-071680-004 | Connecting Link | |
11-052048-001 | Flat Washer (6.4 mm) | |
11-051743-001 | Locknut (6 mm) | |
47-071602-004 | Compression Spring | |
11-052003-001 | Flat Washer (8.4) | |
47-070373-004 | Spacer | |
47-075468-003 | Lever | |
47-075469-003 | Support Bracket | |
47-075472-003 | Support | |
47-075464-004 | Shaft | |
47-075465-004 | N.A. Stop Post (3 mm) | |
47-075699-004 | R.O. Stop Post (6 mm) - When ordering also order 2 each of 11-053482-001 Speed Nut (6 mm) | |
99-070395-002 | N.A. Shock Absorber | |
99-076120-000 | R.O. Hydrualic Shock Absorber Assembly | |
47-075467-003 | Sensor Link | |
47-075466-004 | Shaft | |
99-010102-004 | Flanged Bushing | |
47-075552-009 | Bushing | |
47-075354-004 | Swing Lever | |
47-075368-004 | Bracket | |
99-070356-004 | Solenoid - only (consolidated and nexgen electronics box) | |
47-075463-004 | Connecting Link | |
47-075462-004 | Plate | |
11-053475-001 | Speed Nut (3 mm) | |
11-053482-001 | Speed Nut (6 mm) | |
11-051067-001 | Screw (8 mm x 35 mm) | |
47-075435-004 | Bushing | |
11-051745-001 | Locknut (10 mm) | |
11-051857-001 | Retaining Ring (14 mm) | |
11-051861-000 | Retaining Ring (18 mm) | |
55-050636-004 | Tension Spring | |
11-053476-001 | Speed Nut (4 mm) | |
99-070398-004 | Shock Bumper | |
11-052202-001 | Slotted Machine Screw (5 mm x 55 mm) | |
11-051742-001 | Locknut (5 mm) | |
11-052068-001 | Flat Washer (10 mm) | |
11-053624-001 | Stop Collar (18 mm) | |
11-052801-001 | Set Screw (6 mm x 6 mm) | |
99-070397-004 | Compression Spring | |
99-060133-004 | Plunger only | |
47-075433-004 | Stop | |
47-075463-004 | Connecting Link | |
11-051045-001 | Hex Hd. Cap Screw (10 mm x 30 mm) | |
11-051853-001 | Retaining Ring (20 mm) | |
11-430050-000 | Bearing | |
11-051901-001 | Retaining Ring (47 mm) | |
47-071497-003 | Bearing Flange | |
11-052050-001 | Flat Washer (10.5 mm) | |
11-051771-001 | Lockwasher (10 mm) | |
11-051703-001 | Hex Nut (10 mm) | |
11-053494-000 | Key (5 mm x 5 mm x 32 mm) | |
47-070340-003 | Idler Shaft | |
47-070990-003 | Double Pulley | |
11-053903-000 | V-Belt (8 mm x 13 mm x 1375 mm) | |
99-070162-002 | Pulley | |
11-053901-000 | V-Belt (10 mm x 6 mm x 875 mm) | |
11-051852-001 | Retaining Ring (17 mm) | |
11-051010-001 | Hex Hd. Cap Screw (8 mm x 20 mm) | |
11-051032-001 | Hex Hd. Cap Screw (8 mm x 55 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
47-071482-004 | Tensioning Bracket | |
11-051770-001 | Lockwasher (8 mm) | |
47-073520-009 | Bearing Assembly (includes index numbers 2, 3, 4, 5, and 10) | |
11-053901-000 | V-Belt (10 mm x 6 mm x 875 mm) | |
11-053100-000 | Set Screw (5 mm x 8 mm) | |
47-073866-004 | Motor Drive Pulley - Dual Sheave (50 or 60 Hz) | |
47-075743-004 | Distributor Pulley - 10% reduced speed | |
11-053501-000 | Key (5 mm x 5 mm x 25 mm) | |
11-051028-001 | Hex Hd. Cap Screw (6 mm x 25 mm) | |
11-052048-001 | Flat Washer (6.4 mm) | |
99-040113-002 | N.A. Distributor Motor (1/2 H.P., 230VAC/380VAC) | |
99-076363-000 | R.O. Distributor Motor (1/2 H.P., 230VAC/380VAC) | |
99-040295-004 | N.A. Distributor Motor (1/2 H.P., 208VAC) | |
99-076362-000 | R.O. Distributor Motor (208VAC, 0.37kW) | |
47-070167-004 | Bracket | |
47-075147-003 | Motor Mount Bracket | |
47-095923-004 | Tension Spring | |
11-051743-001 | Locknut (6 mm) | |
99-010102-004 | Bearing | |
11-052036-001 | Flat Washer (15 mm) | |
11-054300-001 | Cotter Pin | |
11-680925-000 | N.A. Strain Relief (for all drum brake motors) | |
11-055080-000 | Strain Relief (for all disc brake motors) | |
11-051022-001 | Hex Hd. Cap Screw (6 mm x 30 mm) | |
11-055400-000 | Circlip | |
99-020163-004 | Tension Spring | |
11-051743-001 | Locknut (6 mm) | |
47-071362-004 | Bracket | |
47-075147-003 | Motor Mount Bracket | |
99-010102-004 | Bearing | |
11-052036-001 | Flat Washer (15 mm) | |
11-054301-001 | N.A. Hitch Pin | |
47-861032-001 | R.O. Cotter Pin (25 mm x 62 mm) Pkg. of 10 | |
11-051703-001 | Hex Nut (10 mm) | |
11-051771-001 | Lockwasher (10 mm) | |
11-053901-000 | V-Belt (10 mm x 6 mm x 875 mm) | |
47-073862-004 | Motor Drive Pulley (50 or 60 Hz) | |
47-073785-004 | N.A. Strap Joint | |
11-053499-000 | N.A. Key (4 mm x 4 mm x 18 mm) | |
11-053101-000 | Set Screw (6 mm x 8 mm) | |
11-051028-001 | Hex Hd. Cap Screw (6 mm x 25 mm) | |
11-052048-001 | Flat Washer (6.4 mm) | |
11-053500-000 | Key (4 mm x 4 mm x 20 mm) | |
46-070378-004 | N.A. Tension Spring | |
47-071820-004 | N.A. Shoe | |
47-071558-004 | N.A. Spiral Brake Pulley | |
11-052802-001 | Set Screw (5 mm x 8 mm) | |
11-053478-001 | N.A. Speed Nut (8 mm) | |
47-861050-000 | R.O. Speed Nut (8 mm) Pkg. of 10 | |
11-052017-001 | Flat Washer (8.4 mm) | |
11-051059-001 | Hex Hd. Cap Screw (10 mm x 110 mm) | |
99-040241-004 | N.A. Sweep Motor - Siemens Motor (1/4 H.P.) w/Integral Brake (230/400VAC, 0.18 kW) | |
99-076367-000 | R.O. Sweep Motor (230/400VAC, 0.18kW) | |
99-040293-004 | N.A. Sweep Motor (1/4 H.P.) w/Integral Brake (208VAC) | |
99-076366-000 | R.O. Sweep Motor (208VAC, 0.18kW) | |
11-053617-001 | Stop Collar (10 mm) | |
47-073786-003 | N.A. Shoe Holder | |
11-680925-000 | N.A. Strain Relief (all drum and external brake motors) | |
11-055080-000 | Strain Relief (all disc brake motors) | |
99-070408-004 | N.A. PCB for New Brake Motor | |
11-053902-000 | V-Belt (Setting Table Motor) | |
11-053100-000 | Set Screw (5 mm x 8 mm) | |
47-073866-004 | Motor Drive Pulley (dual sheave, 50 or 60 Hz) | |
11-053501-000 | Key (5 mm x 5 mm x 25 mm) | |
11-051028-001 | Hex Hd. Cap Screw (6 mm x 25 mm) | |
11-052048-001 | Flat Washer (6.4 mm) | |
99-040116-002 | N.A. Motor (1/2 H.P., 230VAC/380VAC) | |
99-076365-000 | R.O. Setting Table Motor (230VAC/400VAC, 0.37 kW) | |
99-040294-004 | N.A. Motor (1/2 H.P., 208VAC) | |
99-076364-000 | R.O. Setting Table Motor (208V, 0.37kW) | |
47-070167-004 | Bracket | |
47-075147-003 | Motor Mount Bracket | |
99-020163-004 | Spring | |
11-051743-001 | Locknut (6 mm) | |
99-010102-004 | Bearing | |
11-052036-001 | Flat Washer (15 mm) | |
11-054301-001 | N.A. Hitch Pin | |
47-861032-001 | R.O. Cotter Pin (25 mm x 62 mm) Pkg. of 10 | |
11-680925-000 | N.A. Strain Relief (all drum brake motors) | |
11-055080-000 | N.A. Strain Relief (all disc brake motors) | |
11-051022-001 | Hex Hd. Cap Screw (6 mm x 30 mm) | |
11-055400-000 | Circlip | |
99-070408-004 | N.A. Motor PCB | |
99-070407-004 | N.A. New Brake Kit | |
47-070171-004 | Spacer Bushing (18.5 mm) | |
47-071219-003 | Gear and Shaft | |
11-601006-000 | 50 Link Chain | |
11-600501-000 | Connecting Link (3 pieces) | |
11-052056-001 | Flat Washer (20 mm) | |
11-052038-001 | Flat Washer (21 mm) | |
99-010217-004 | Bushing | |
47-045192-004 | Flat Connecting Link | |
11-051853-001 | Retaining Ring (20 mm) | |
11-051869-000 | Retaining Ring (15 mm) | |
99-010103-004 | Bushing | |
47-041530-002 | Sweep Shaft | |
11-053495-000 | Key (8 mm x 7 mm x 40 mm) | |
47-072063-003 | Main Drive Shaft/Gear (non tower down) - Series and below | |
47-075485-003 | Main Drive Shaft/Gear (tower down) - Series 443 and above | |
11-052801-001 | Set Screw (6 mm x 6 mm) | |
47-073508-004 | Spacer Bushing | |
11-053151-001 | Hex Hd. Jam Nut (8 mm) | |
47-072065-004 | Shaft Plate | |
11-051015-001 | Hex Hd. Cap Screw (8 mm x 25 mm) | |
47-072061-004 | Spacer Plates | |
47-075352-004 | Pivot Bearing | |
11-052050-001 | Flat Washer (10.5 mm) | |
11-053480-001 | Speed Nut (10 mm) | |
47-045487-004 | Chain - Master Link Included (25 Link -Tower Down Machine) | |
11-600500-000 | Connecting Link (standard) | |
47-070172-004 | Stop Collar | |
11-601008-000 | Roller Chain (77 Link) 47862803-000 N.A. Chain Lube (spray can) G34205116-000 R.O. Chain Lube (12 oz can) | |
11-154106-001 | S.O. Spacer (18 mm x 30 mm x 1 mm) | |
47-071343-004 | Clevis | |
11-051706-001 | Hex Nut (12 mm) | |
11-051772-001 | Lockwasher (12 mm) | |
11-052047-001 | Flatwasher (13 mm) | |
47-071975-004 | Threaded Rod | |
11-053495-000 | Key (8 mm x 7 mm x 40 mm) | |
11-601005-000 | Chain - Master Link Included (21 Link -Tower Up Machine) | |
11-051856-001 | Retaining Ring (25 mm) | |
47-071449-604 | N.A. Sintered Iron Pinion Gear | |
47-071449-609 | R.O. Pkg. Metal Pinion Gear | |
11-053495-000 | Key (8 mm x 7 mm x 40 mm) | |
47-071452-004 | Shaft | |
47-073584-004 | R.H. Spacer Bushing (61.5 mm) | |
47-071451-004 | L.H. Spacer Bushing (43.5 mm) | |
47-073791-004 | Cable Channel (20 mm x 185 mm) | |
47-071564-001 | R.H. Gear Train Frame | |
11-051703-001 | Hex Nut (10 mm) | |
11-051771-001 | Lockwasher (10 mm) | |
11-052902-000 | Shaft Bearing | |
11-052901-000 | Shaft Bearing | |
11-051704-001 | Hex Nut (8 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
47-073797-004 | Cable Channel (30 mm x 1800 mm) | |
47-041215-004 | Connecting Rod (left-hand thread) | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
47-070186-003 | Sweep Shaft Support | |
11-051005-001 | Hex Hd. Cap Screw (10 mm x 20 mm) | |
11-052201-001 | N.A. Sltd. Machine Screw (4 mm x 10 mm) | |
11-052025-001 | Flat Washer (4.3 mm) | |
99-050229-004 | Switch (Red Box) | |
47-052123-004 | Spring Shaft | |
47-052120-004 | Tension Spring | |
11-053624-000 | N.A. Stop Collar (20 mm) | |
11-052803-001 | Set Screw (6 mm x 10 mm) | |
47-081958-004 | Sweep Bearing Holder | |
47-081959-003 | Sweep Shaft Bearing | |
47-041530-002 | Sweep Shaft | |
47-243026-004 | Switch (silver, consolidated and nexgen electronics box) | |
47-043588-001 | N.A. Connecting Rod (R.H. thread) | |
11-052038-001 | Flat Washer (20 mm) | |
99-010217-004 | Bushing | |
11-051853-001 | Retaining Ring (20 mm) | |
11-054201-001 | L.H. Hex Nut (16 mm) | |
47-040162-004 | Turnbuckle Nut | |
11-051707-001 | R.H. Hex Nut (16 mm) | |
11-052056-001 | Flat Washer (21 mm) | |
47-071529-003 | Crank | |
11-051742-001 | Locknut (5 mm) | |
11-051030-001 | Hex Hd. Cap Screw (5 mm x 20 mm) | |
11-051509-001 | Socket Hd. Cap Screw (6 mm x 12 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
11-052048-001 | Flat Washer (6.4 mm) | |
11-052020-001 | Flat Washer (5.3 mm) | |
11-051057-001 | Hex Hd. Cap Screw (10 mm x 60 mm) | |
11-051745-001 | Locknut (10 mm) | |
11-052024-001 | N.A. Flat Washer (13 mm) | |
47-861010-001 | R.O. Flat Washer (13 mm) Pkg. of 20 | |
47-075132-003 | Cam Assembliy | |
47-084284-004 | Cable Channel (1 meter cut to length) | |
47-075453-001 | N.A. R.H. Gear Train Frame | |
11-051745-001 | Locknut (10 mm) | |
11-052056-001 | Flat Washer (20 mm) | |
11-052902-000 | Shaft Bearing | |
47-071529-003 | Sweep Crank | |
11-051744-001 | Locknut (8 mm) | |
47-045192-004 | Crank | |
47-075132-003 | Cam | |
11-051853-001 | Retaining Ring (20 mm) | |
11-051010-001 | Hex Hd. Cap Screw (8 mm x 20 mm) | |
47-070186-003 | Sweep Shaft Support | |
11-051005-001 | Hex Hd. Cap Screw (10 mm x 20 mm) | |
99-010107-004 | Bushing | |
11-055151-001 | N.A. Screw | |
11-055151-000 | R.O. Self Tapping Screw | |
47-243026-004 | Switch (silver box, consolidated and nexgen electronics box) | |
11-051509-001 | Socket Hd. Cap Screw (6 mm x 12 mm) | |
11-052038-001 | Flat Washer (20 mm) | |
11-051087-001 | N.A. Hex Hd. Cap Screw (10 mm x 65 mm) | |
11-052048-001 | Flat Washer (6.4 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
47-081958-004 | Sweep Bearing Holder | |
47-081959-003 | Sweep Shaft Bearing | |
47-045458-002 | Sweep Shaft | |
11-052021-001 | Flat Washer (4.3 mm) | |
11-051856-001 | Retaining Ring (25 mm) | |
11-053497-000 | Key (8 mm x 7 mm x 32 mm) | |
11-430052-000 | Bearing | |
47-071589-003 | Jam Lever | |
11-051703-001 | Hex Nut (10 mm) | |
47-071593-004 | N.A. Tension Screw | |
47-071591-004 | Sprocket Shaft | |
55-050635-004 | Tension Spring | |
11-601007-000 | Roller 64 (Link Chain) | |
47-011053-004 | Sprocket | |
11-051852-001 | Retaining Ring (17 mm) | |
11-051741-001 | Locknut (4 mm) | |
11-052025-001 | Flat Washer (4.3 mm) | |
11-052207-001 | N.A. Slotted Machine Screw (4 mm x 12 mm) | |
47-861015-001 | R.O. Slotted Machine Screw (4 mm x 12 mm) Pkg. of 20 | |
99-050229-004 | Switch (Red Box only) | |
11-051005-001 | Hex Hd. Cap Screw (10 mm x 20 mm) | |
47-071975-004 | Threaded Connector | |
11-051706-001 | Hex Nut (12 mm) | |
11-052024-001 | N.A. Flat Washer (13 mm) | |
47-861010-001 | R.O. Flat Washer (13 mm) Pkg. of 20 | |
11-054106-001 | N.A. Flat Washer (18 mm) | |
47-861031-001 | R.O. Flat Washer (18 mm) Pkg. of 10 | |
11-051772-001 | Lockwasher (12 mm) | |
11-051057-001 | Hex Hd. Cap Screw (10 mm x 60 mm) | |
11-051009-001 | Hex Hd. Cap Screw (12 mm x 30 mm) | |
11-051742-001 | Locknut (5 mm) | |
47-071341-003 | Crank Arm | |
47-071342-003 | Crank | |
11-053495-000 | Key (8 mm x 7 mm x 40 mm) | |
11-052206-001 | Slotted Machine Screw (4 mm x 25 mm) | |
11-051786-001 | Cotter Pin (2.5 mm x 25 mm) | |
11-051745-001 | Locknut (10 mm) | |
11-600500-000 | Master Link Assembly (3 Pieces) | |
99-050230-004 | Switch (Red Box) | |
47-072360-002 | Guide Beam (Upper) | |
47-071343-004 | Clevice | |
47-072361-003 | Guide Beam (Lower) | |
47-072362-004 | Support Bracket | |
47-243027-004 | Switch (silver box, consolidated and nexgen) | |
47-243026-004 | Switch (silver box, consolidated and nexgen) | |
11-051771-001 | Lockwasher (10 mm) | |
11-054102-001 | N.A. Shim | |
47-861028-001 | R.O. Shim Washer, Pkg. of 10 | |
11-052009-001 | Flat Washer (17 mm) | |
11-052021-001 | Flat Washer (4.3 mm) | |
11-051003-001 | N.A. Hex Hd. Cap Screw (5 mm x 16 mm) | |
11-052020-001 | Flat Washer (5.3 mm x 12 mm x 0.8 mm) | |
47-071595-004 | Distance Washer | |
11-051856-001 | Retaining Ring (25 mm) | |
11-053497-000 | Key (8 mm x 7 mm x 32 mm) | |
11-430052-000 | Bearing | |
47-071589-003 | Jam Lever | |
11-051703-001 | Hex Nut (10 mm) | |
47-071591-004 | Sprocket Shaft | |
55-050635-004 | Spring | |
11-601007-000 | Roller Chain (64 Link) | |
47-011053-004 | Sprocket | |
11-051852-001 | Retaining Ring (17 mm) | |
11-051741-001 | Locknut (4 mm) | |
11-052025-001 | Flat Washer (4.3 mm) | |
11-052207-001 | N.A. Slotted Machine Screw (4 mm x 12 mm) | |
47-861015-001 | R.O. Slotted Machine Screw (4 mm x 12 mm) Pkg. of 20 | |
99-050229-004 | Switch (red box only) | |
11-051005-001 | Hex Hd. Cap Screw (10 mm x 20 mm) | |
47-071975-004 | Threaded Connector | |
11-051706-001 | Hex Nut (12 mm) | |
11-052024-001 | N.A. Flat Washer (13 mm) | |
47-861010-001 | R.O. Flat Washer (13 mm) Pkg. of 20 | |
11-052052-001 | Flat Washer (18 mm) | |
11-051772-001 | Lockwasher (12 mm) | |
11-051057-001 | Hex Hd. Cap Screw (10 mm x 60 mm) | |
11-051009-001 | Hex Hd. Cap Screw (12 mm x 30 mm) | |
11-052053-001 | N.A. Flat Washer (17 mm) | |
47-861011-001 | R.O. Flat Washer (17 mm) Pkg. of 10 | |
47-071341-003 | Crank Arm | |
47-071342-003 | Crank | |
11-053495-000 | Key (8 mm x 7 mm x 40 mm) | |
11-052206-001 | Slotted Machine Screw (4 mm x 25 mm) | |
11-051786-001 | Split Pin (2.5 mm x 25 mm) | |
11-051745-001 | Locknut (10 mm) | |
11-600500-000 | Master Link (3 pieces) | |
99-050230-004 | Switch (red box) | |
47-071343-004 | Clevice | |
47-243026-004 | Switch (silver box, consolidated and nexgen) | |
47-243027-004 | Switch (ssilver box, consolidated and nexgen) | |
47-075482-002 | Guide Beam | |
11-051856-001 | Retaining Ring (25 mm) | |
47-075473-003 | Switch Support | |
47-085436-003 | R.H. Guide Support Bracket | |
47-085430-003 | L.H. Guide Support Bracket | |
47-085349-003 | Tube Guide | |
47-085449-003 | Support Rod | |
47-085446-003 | N.A. Support | |
47-085446-004 | R.O. Support | |
55-050635-004 | Tension Spring | |
47-074717-004 | Adjustment Screw | |
47-075432-004 | Spring Bracket | |
47-075475-004 | Lever | |
47-085348-003 | Bearing Housing | |
47-071591-004 | Sprocket Shaft | |
47-070386-004 | Counter Weight | |
11-053507-000 | Key (8 mm x 7 mm x 30 mm) | |
47-075488-004 | 5/8” Chain (51 links and 2 connection links) | |
47-011053-004 | Sprocket | |
47-243028-004 | O.O.R. Switch (consolidated and nexgen electronics box) | |
47-075352-004 | Pivot Bearing | |
47-075357-003 | Crank Arm | |
47-075356-003 | Crank | |
11-430052-000 | Bearing | |
11-051070-001 | Hex Head Cap Screw (12 mm x 60 mm) | |
11-051747-001 | Locknut (12 mm) | |
11-051772-001 | Lockwasher (12 mm) | |
11-051062-001 | Hex Head Cap Screw (12 mm x 25 mm) | |
11-052024-001 | N.A. Flat Washer (13 mm) | |
47-861010-001 | R.O. Flat Washer (13 mm) Pkg. of 20 | |
11-054106-001 | N.A. Flat Washer (18 mm) | |
47-861031-001 | R.O. Flat Washer (18 mm) Pkg. of 10 | |
11-054300-001 | Cotter Pin (2 mm) | |
11-053493-000 | Key (8 mm x 7 mm x 45 mm) | |
11-051852-000 | N.A. Retaining Ring (17 mm) | |
11-051852-001 | R.O. Retaining Ring (17 mm) | |
11-600500-000 | Master Link (3-piece) | |
47-862803-000 | N.A. Chain Lube (spray can) | |
G34-205116-000 | R.O. Pinsetter Chain Lub (12 oz can) | |
47-075486-004 | Chain | |
47-075476-004 | Shaft | |
11-430051-000 | Bearing | |
47-075474-004 | N.A. Chain Gear | |
47-075474-009 | R.O. Chain Gear w/Set Screws | |
47-243028-004 | TS-2 Switch | |
11-053503-000 | Key (8 mm x 7 mm x 28 mm) | |
11-051035-001 | Hex Hd. Cap Screw (6 mm x 16 mm) | |
11-052048-001 | Flat Washer (6.4 mm) | |
11-051743-001 | Locknut (6 mm) | |
47-210446-000 | N.A. PCB #11 (GS-10) | |
47-075188-001 | Switch Cluster Frame (Fixed B-Switch) | |
47-071876-001 | Switch Cluster Frame (Adjustable B-Switch) | |
47-072307-004 | Reed Switch (red box electronics) | |
47-071879-003 | Cam | |
11-052804-001 | Set Screw (6 mm x 8 mm) | |
47-073534-004 | Cherry Switch (red box electronics) | |
11-052204-001 | Sltd. Machine Screw (2.5 mm x 16 mm) | |
11-051766-001 | Lockwasher (2.5 mm) | |
47-071881-004 | Square Shaft Drive Gear | |
47-071883-004 | Clutch Shaft | |
11-051769-001 | Lockwasher (6 mm) | |
11-051514-001 | Socket Hd. Cap Screw (6 mm x 16 mm) | |
11-051509-001 | Socket Hd. Cap Screw (6 mm x 12 mm) | |
47-071578-004 | Bearing Block | |
47-071880-004 | N.A. Spindle Gear | |
47-071880-003 | R.O. Spindle Gear | |
11-052049-001 | Flat Washer (2.7 mm x 6.5 mm x .5 mm) | |
47-071878-003 | Spindle Flange | |
11-051856-001 | Retaining Ring (25 mm) | |
47-243028-004 | Cherry Switch (silver, consolidated and nexgen electronics box) | |
47-243029-004 | Reed Switch (silver, consolidated and nexgen electronics box) | |
99-050181-004 | Reed Switch Holder | |
11-052354-001 | Sltd. Pan Hd. Screw (4 mm x 12 mm) | |
11-053623-001 | Stop Collar (12 mm) | |
47-072340-004 | Square Shaft | |
47-055138-004 | Connecting Link (includes 2 speed nuts) | |
11-051795-001 | Cotter Pin (1.6 mm x 16 mm) | |
11-051522-001 | Socket Hd. Cap Screw (5 mm x 16 mm) | |
47-051782-004 | Tension Spring | |
47-051621-003 | Base | |
11-430046-000 | Bearing | |
11-052025-001 | Flat Washer (4.3 mm) | |
47-051622-004 | Bearing Plate | |
47-055605-004 | Bearing Plate (series 446 and above) | |
11-051743-001 | Locknut (6 mm) | |
11-051854-001 | Retaining Ring (8 mm) | |
47-051674-004 | Latch | |
47-055151-004 | Dowel Pin (8 mm x 24 mm) | |
11-051514-001 | Socket Hd. Cap Screw (6 mm x 16 mm) | |
11-051024-001 | Hex Hd. Cap Screw (6 mm x 70 mm) | |
11-051855-001 | Retaining Ring (10 mm) | |
11-051028-001 | Hex Hd. Cap Screw (6 mm x 25 mm) | |
47-052337-004 | L.H. Square Shaft Bracket (pin release) | |
47-052334-004 | R.H. Square Shaft Bracket (spotting tong) | |
11-052680-001 | Roll Pin (2 mm x 18 mm) | |
11-430048-000 | Bearing | |
47-071615-004 | Square Shaft Gear | |
47-051625-004 | Square Shaft Support | |
11-051742-001 | Self Locking Hex Nut (5 mm) | |
47-055124-004 | Square Shaft (16 mm middle) | |
47-055125-004 | Square Shaft (12 mm top) | |
11-051795-001 | Cotter Pin (1.6 mm x 16 mm) | |
11-051522-001 | Socket Hd. Cap Screw (5 mm x 16 mm) | |
47-051782-004 | Tension Spring | |
47-051621-003 | Base | |
11-430046-000 | Bearing | |
11-052025-001 | Flat Washer (4.3 mm) | |
47-051622-004 | Bearing Plate | |
47-055605-004 | Bearing Plate (series 446 and above) | |
11-051854-001 | Retaining Ring (8 mm) | |
47-051674-004 | Latch | |
47-055151-004 | Dowel Pin (8 mm x 24 mm) | |
11-051514-001 | Socket Hd. Cap Screw (6 mm x 16 mm) | |
11-051024-001 | Hex Hd. Cap Screw (6 mm x 70 mm) | |
11-051855-001 | Retaining Ring (10 mm) | |
11-051030-001 | Hex Hd. Cap Screw (5 mm x 20 mm) | |
47-055127-004 | L.H. Bottom Shaft Bracket - pin release | |
47-055126-004 | R.H. Bottom Shaft Bracket - spotting tong | |
11-052680-001 | Roll Pin (2 mm x 18 mm) | |
11-430048-000 | Bearing | |
47-071615-004 | Square Shaft Gear | |
47-051625-004 | Square Shaft Support | |
11-051742-001 | Self Locking Hex Nut (5 mm) | |
47-055138-004 | Connecting Link (includes 2 speed nuts) | |
11-051004-001 | N.A. Hex Hd. Cap Screw (5 mm x 25 mm) | |
47-861001-001 | R.O. Hex Hd. Cap Screw (5mm x 25 mm) Pkg. of 10 | |
11-053476-001 | Speed Nut Pkg. of 10 | |
11-051747-001 | Self Locking Nut (5 mm) | |
11-051005-001 | Hex Hd. Cap Screw (10 mm x 20 mm) | |
11-051055-001 | Hex Head Screw (8 mm x 60 mm) | |
47-080207-003 | Angle Bracket | |
47-080206-004 | Common Mounting Plate | |
11-052453-001 | N.A. Flat Hd. Wood Screw (8 mm x 60 mm) | |
11-052552-001 | R.O. Phillps Screw (M8 x 60 mm) | |
47-082375-002 | N.A. L.H. Side Frame | |
11-051771-001 | Lockwasher (10 mm) | |
47-081164-004 | N.A. L.H. Support Brace | |
11-051035-001 | Hex Hd. Cap Screw (6 mm x 16 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
11-051702-001 | Hex Nut (6 mm) | |
47-082379-004 | N.A. Rear Brace Supports | |
47-082377-001 | N.A. Upper Rear Cross Brace | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
47-081251-004 | N.A. U-Bracket | |
47-081256-004 | N.A. R.H.Support | |
47-082376-002 | R.H. Side Frame | |
47-080201-001 | N.A. Front Frame Support (all GS-Series) | |
47-081961-003 | N.A. Support Strap | |
47-083659-004 | R.O. New Style Support Straps (index No. 42) | |
47-082128-003 | Catwalk | |
11-052603-001 | Carriage Bolt (8 mm x 45 mm) | |
47-081857-002 | N.A. Electrical Box Mounting Plate | |
47-084955-002 | Cable Channel | |
47-083506-003 | L.H. Catwalk Support | |
11-051745-001 | Locknut (10 mm) | |
11-051010-001 | Hex Hd. Cap Screw (8 mm x 20 mm) | |
11-051744-001 | Locknut (8 mm) | |
11-053575-000 | Rubber Mount | |
11-053576-000 | Rubber Mount | |
47-081960-003 | R.H. Catwalk Support | |
11-051509-001 | Socket Hd. Cap Screw (6 mm x 12 mm) | |
11-052048-001 | Flat Washer (6.4 mm) | |
11-051539-001 | Socket Hd. Cap Screw (4 mm x 6 mm) | |
99-050229-004 | Switch Assembly Complete (red box only) | |
11-052019-001 | Flat Washer (8.4 mm) | |
47-082378-003 | N.A. Lower Rear Cross Brace | |
47-082135-002 | N.A. Pin Lamp Assembly Guard | |
47-223075-004 | N.A. Pin Light & Bulb Assembly | |
47-091316-003 | N.A. Pin Deflector (for Single Feed Distributors only) | |
47-081664-004 | New Style Support Brace | |
47-083659-004 | New Style Support Strap | |
47-083667-003 | Electrical Box Mounting Plate (silver box) | |
47-223075-004 | N.A. Pin Lamp Assembly Complete (silver box) | |
47-203152-000 | Bulb (White) | |
47-203147-000 | Starter | |
11-601800-000 | N.A. Quick-Lock Fastener Stud | |
11-052050-001 | Flat Washer (10.5 mm) | |
47-083662-004 | N.A. Angle Bracket | |
11-051001-001 | Hex Hd. Cap Screw (6 mm x 12 mm) | |
11-051743-001 | Locknut (6 mm) | |
11-052008-001 | Flat Washer (6.4 mm x 12.5 mm x 1.6 mm) | |
84-200073-000 | Barrel Nut | |
12-862933-000 | Black Light Bulb - Pkg. of 6 | |
12-862922-000 | Dual Lamp Assembly w/Bulbs | |
47-085443-002 | R.H.Side Frame | |
47-085442-002 | L.H. Side Frame | |
47-082377-001 | N.A. Upper Rear Cross Brace | |
11-051704-001 | Hex Nut (8 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
11-051005-001 | Hex Hd. Cap Screw (10 mm x 20 mm | |
11-052050-001 | Hex Hd. Cap Screw (10 mm x 30 mm) | |
11-051771-001 | Lockwasher (10 mm) | |
11-052252-001 | N.A. Flat Hd. Screw (8 mm x 60 mm) | |
11-052552-001 | R.O. Phillips Screw (M8 x 60 mm) | |
47-082379-004 | N.A. Rear Brace Supports | |
47-080206-004 | Common Mounting Plate | |
84-200073-000 | Barrel Nut | |
11-051745-001 | Locknut (10 mm) | |
47-080207-003 | Angle Bracket | |
11-051702-001 | Hex Nut (6 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
11-051055-001 | Lag Screw (8 mm x 60 mm) | |
11-051509-001 | Socket Hd. Cap Screw (6 mm x 12 mm) | |
11-052048-001 | Flat Washer (6.4 mm) | |
11-051744-001 | Locknut (8 mm) | |
11-052603-001 | Carriage Bolt (8 mm x 45 mm) | |
47-082128-003 | Catwalk | |
47-083659-004 | New Style Support Strap | |
11-051745-001 | Locknut (10 mm) | |
47-085362-002 | N.A. Front Frame Support | |
47-083506-003 | L.H. Catwalk Support | |
47-084955-002 | Cable Channel | |
47-225723-004 | Dual Light Assembly - w/o Bulbs or Power Supply/Control Unit (230/380 Volt) | |
47-225722-004 | Dual Light Assembly - w/o Bulbs or Power Supply/Control Unit (208 Volt) | |
47-203152-000 | Bulb - White | |
99-220385-004 | Bulb - Black | |
99-220366-004 | Relay (24VAC) | |
47-225254-003 | Power Supply/Control Unit | |
47-225263-004 | Controller Cable | |
47-203147-000 | Starter (230/380 volt pinsetters only) | |
47-225732-004 | Electronic Ballast (208 Volt) | |
47-081960-003 | Catwalk Support (right-hand) | |
47-085489-004 | N.A. Guard Support | |
47-081492-003 | Rear Guide Tower Support Brace | |
47-081357-003 | N.A. Front Guide Tower Support Brace | |
47-081359-004 | Cross Support Brace | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-051744-001 | Locknut (8 mm) | |
11-051010-001 | Hex Hd. Cap Screw (8 mm x 20 mm) | |
47-084022-003 | S.O. Cable Channel Support Brace | |
47-084956-002 | Middle Channel | |
47-084955-002 | Channel (for left-hand and right-hand use) | |
47-084958-004 | Channel/Cover Assembly - complete | |
47-084959-004 | Nylon Push Fastener | |
47-094344-003 | Front Pulley Shaft | |
47-091905-003 | R.H. Turn Plate | |
11-051038-001 | Hex Hd. Cap Screw(8 mm x 16 mm) | |
47-090547-004 | Spur Gear w/25 mm Collar | |
47-275746-009 | Two Piece Gear Kit | |
47-092300-004 | Polycord Roll(12 mm dia. x 44 meters Lg.) | |
47-092300-005 | Polycord Roll(13 mm dia. x 20 meters Lg.) | |
11-051770-001 | Lockwasher (8 mm) | |
11-051744-001 | Hex Nut (8 mm) | |
47-090989-002 | Double Pulley | |
11-053903-000 | V-Belt(13 mm x 8 mm x 1375 mm) | |
11-054102-001 | N.A. Spacer Flat Washer (25 mm) | |
47-861028-001 | R.O. Shim Washers Pkg. of 10 | |
11-051856-001 | Retaining Ring (25 mm) | |
47-091904-003 | Turn Plate (left-hand)Assembly Complete | |
47-092193-003 | Pulley Holder (right-hand) | |
47-092271-004 | N.A. Pin Guide | |
47-091277-002 | Slider Mount | |
47-091284-002 | Slider Assembly Complete | |
47-097417-000 | A/P Pin Guide/Stop | |
47-090969-003 | Pin Stop | |
11-051520-001 | Socket Hd. Cap Screw(6 mm x 30 mm) | |
11-051515-001 | Socket Hd. Cap Screw(6 mm x 18 mm) | |
11-054449-000 | Hex Hd. Self-TappingScrew (K70 x 18 mm) | |
11-052019-001 | Flat Washer (8.4 mm) | |
11-051852-001 | Retaining Ring (17 mm) | |
11-052804-001 | Set Screw (6 mm x 8 mm)(for Pulley Hub) | |
11-051546-001 | Hex Hd. Cap Screw(5 mm x 40 mm) | |
11-052039-001 | Flat Washer (5.3 mm) | |
11-051742-001 | Locknut (5 mm) | |
47-092415-003 | Pulley w/Bearing | |
47-092496-004 | N.A. Pin Guide | |
11-051743-001 | Locknut (6 mm) | |
11-052037-001 | Flat Washer (6.4 mm) | |
47-092202-004 | Shaft | |
47-092203-004 | Shaft | |
47-092199-003 | N.A. Bracket | |
47-091512-003 | N.A. Flat Spring | |
47-092206-004 | Shaft | |
47-093874-004 | Clamp | |
47-093547-004 | Gear | |
47-093741-002 | S.O. Dust Pan | |
47-093771-004 | Felt Pad | |
11-676027-000 | N.A. Contact Cement - quart | |
11-676047-000 | Contact Cement - gallon | |
47-093587-004 | Dowel Pin (Pkg. of 25) | |
47-093863-003 | Round Belt Pulley | |
47-275748-009 | 2-Piece Pulley Kit | |
47-094353-004 | PVC Spacer | |
47-094347-003 | Bearing Shell | |
47-094346-003 | Bearing Shell w/Shoulder | |
47-094351-003 | Washer | |
11-430013-000 | Bearing | |
11-051010-001 | Hex Hd. Cap Screw(8 mm x 20 mm) | |
11-052006-001 | Washer (8.4 mm) | |
47-094349-001 | Front Shaft Assembly | |
47-091854-004 | N.A. Vinyl (long pit version) | |
47-092345-004 | R.O. Vinyl (short pit version) | |
47-092476-004 | Pin Turn Device (left-hand) | |
47-092475-004 | Pin Turn Device (right-hand)included) | |
47-095609-002 | R.O. Slider Only (hardware notincluded) | |
47-092265-003 | Extension Rails (L.H./R.H., forDual Feed Distributor,for short pit) | |
47-092249-002 | N.A. L.H./R.H. Extension Rails forDual Feed Distributor (long pit) | |
47-093901-002 | R.O. L.H./R.H. Distributor ExtensionDual Feed (long pit) | |
47-094712-003 | Bracket | |
47-274806-009 | Guide Rail Extension Kit | |
47-092479-003 | R.H. Guide Bracket | |
11-051018-001 | Hex Head Cap Screw(6 mm x 20 mm) | |
47-093760-002 | Distributor Station (pin no. 7,steel) | |
47-091890-002 | Distributor Stations (pin nos.2,3,8,9, and 10, steel) | |
47-092211-002 | Distributor Stations (pin nos. 1and 6, steel) | |
47-092186-003 | Bracket | |
47-092478-003 | L.H. Guide Bracket | |
47-095050-003 | Plastic Bearing | |
47-093910-003 | R.H. Shark Rail | |
47-093911-003 | L.H. Shark Rail | |
47-092238-003 | S.O. R.H. Distributor Rail - long | |
47-092239-003 | S.O. L.H. Distributor Rail - long | |
47-275730-009 | Distributor Repair Kit | |
47-092454-004 | Rail - short (front) | |
47-092242-002 | S.O. L.H. Plate - upper | |
47-095146-003 | S.O. L.H. Plate - lower | |
47-093883-004 | Shaft | |
47-094345-003 | N.A. Middle Shaft | |
47-095144-003 | S.O. R.H. Plate - lower | |
47-092243-002 | R.H. Plate - upper | |
47-092474-004 | N.A. Pin Turn Pad | |
47-092237-003 | S.O. L.H. Front Rail | |
47-092234-003 | S.O. R.H. Front Rail | |
47-094232-004 | Rubber Grommet | |
11-052048-001 | Flat Washer (6.4 mm) | |
47-095173-003 | Pin Deflector Shoe, Left-hand(For 2-piece Shoe) | |
47-095172-003 | Pin Deflector Shoe, Righthand (For 2-piece Shoe) | |
47-093934-003 | Pin Deflector Shoe - SinglePiece | |
47-091690-002 | Retaining Bow w/Flap | |
47-091694-004 | Square Spindle | |
47-090581-004 | Tension Spring | |
47-092442-003 | R.H. Ejector Flap | |
47-092441-003 | L.H. Ejector Flap | |
11-051769-001 | Lockwasher (6 mm) | |
11-051515-001 | Socket Hd. Cap Screw (6 mm x 18 mm) | |
47-090568-004 | Bow | |
11-051791-001 | Split Pin (1.6 mm x 10 mm) | |
47-090575-004 | Flat Washer (6.5 mm) | |
11-051855-001 | Retaining Ring (10 mm) | |
47-090570-004 | Shaft | |
47-090572-004 | Shaft | |
47-090571-004 | Shaft | |
47-090565-002 | N.A. Bottom Housing | |
47-090560-004 | N.A. Bevel Wheel w/Cam | |
47-090557-004 | N.A. Cam | |
11-052681-001 | Rolled Pin (3 mm x 16 mm) | |
47-090558-004 | Cam Retainer | |
47-090556-004 | Retaining Lever | |
47-094352-004 | Tension Spring | |
11-051768-001 | Lockwasher (5 mm) | |
11-051523-001 | Socket Hd. Cap Screw (5 mm x 10 mm) | |
47-090580-004 | Tension Spring | |
47-090577-004 | R.H. Torsion Spring (Pin Nos. 2,4,6,8 & 10) | |
47-090578-004 | L.H. Torsion Spring (Pin Nos. 1,3,5,7 & 9) | |
47-090562-003 | Top Housing | |
47-090559-004 | Bevel Wheel | |
47-091693-004 | Clamping Lever | |
47-091692-004 | Pivoting Lever | |
11-053478-001 | N.A. Speed Nut (8 mm) | |
47-861050-000 | R.O. Speed Nut (8 mm) Pkg. of 10 | |
11-052037-001 | Flat Washer (6.4 mm) | |
11-051743-001 | Locknut (6 mm) | |
11-051524-001 | N.A. Socket Hd. Cap Screw (5 mm x 40 mm) | |
11-051522-001 | Socket Hd. Cap Screw (5 mm x 16 mm) | |
11-052042-001 | Flat Washer (10 mm) | |
11-052680-001 | Rolled Pin (2 mm x 18 mm) | |
11-051742-001 | Locknut (5 mm) | |
11-051509-001 | Socket Hd. Cap Screw (6 mm x 12 mm) | |
47-093591-004 | Release Lever Pin - two piece (Pin Nos. 2,3,7,8,9 & 10) | |
47-093592-004 | Release Lever Pin - two piece (Pin Nos. 1,4,5 & 6) | |
47-093589-004 | Release Lever Pin - two piece (Pin Nos. 2,3,7,8,9 & 10) | |
47-093590-004 | Release Lever Pin - two piece (Pin Nos. 1,4,5 & 6) | |
47-091725-004 | Retaining Plate | |
11-051741-001 | Locknut (4 mm) | |
11-052025-001 | Flat Washer (4.3 mm) | |
11-052208-001 | Sltd. Machine Hd. Screw (4 mm x 30 mm) | |
47-091690-002 | Retaining Bow w/Flap | |
47-091694-004 | Square Spindle | |
47-094099-004 | Tension Spring | |
47-093926-002 | R.H Ejector Flap | |
47-093927-002 | L.H. Ejector Flap | |
11-051769-001 | Lockwasher (6 mm) | |
11-051515-001 | Socket Hd. Cap Screw (6 mm x 18 mm) | |
11-051855-001 | Retaining Ring (10 mm) | |
47-090570-004 | Shaft | |
47-090572-004 | Shaft | |
47-090571-004 | Shaft | |
47-090565-002 | N.A. Bottom Housing | |
47-090560-004 | N.A. Bevel Wheel w/Cam | |
47-090557-004 | N.A. Cam | |
11-052681-001 | Rolled Pin (3 mm x 16 mm) | |
47-090558-004 | Cam Retainer | |
47-090556-004 | Retaining Lever | |
47-094352-004 | Tension Spring | |
11-051768-001 | Lockwasher (5 mm) | |
11-051523-001 | Socket Hd. Cap Screw (5 mm x 10 mm) | |
47-090580-004 | Tension Spring | |
47-090577-004 | R.H. Torsion Spring (Pin Nos. 2,4,6,8 & 10) | |
47-090578-004 | L.H. Torsion Spring (Pin Nos. 1,3,5,7 & 9) | |
47-090562-003 | Top Housing | |
47-090559-004 | Bevel Wheel | |
47-091693-004 | Clamping Lever | |
47-091692-004 | Pivoting Lever | |
11-053478-001 | N.A. Speed Nut (8 mm) | |
47-861050-000 | R.O. Speed Nut (8 mm) Pkg. of 10 | |
11-051514-001 | Socket Hd. Cap Screw (6 mm x 16 mm) | |
11-052048-001 | Flat Washer (6.4 mm) | |
11-051743-001 | Locknut (6 mm) | |
11-051524-001 | N.A. Socket Hd. Cap Screw (5 mm x 40 mm) | |
11-051522-001 | Socket Hd. Cap Screw (5 mm x 16 mm) | |
11-052042-001 | Flat Washer (10 mm) | |
11-050401-001 | N.A. Self-Tapping Screw (4 mm x 8 mm) | |
11-051742-001 | Locknut (5 mm) | |
11-051509-001 | Socket Hd. Cap Screw (6 mm x 12 mm) | |
47-093591-004 | Release Lever Pin - two piece (Pin Nos. 2,3,7,8,9 & 10) | |
47-093592-004 | Release Lever Pin - two piece (Pin Nos. 1,4,5 & 6) | |
47-093590-004 | Release Lever Pin - two piece (Pin Nos. 1,4,5 & 6) | |
47-091725-004 | Retaining Plate | |
11-051741-001 | Locknut (4 mm) | |
11-052025-001 | Flat Washer (4.3 mm) | |
11-052208-001 | Sltd. Machine Hd. Screw (4 mm x 30 mm) | |
47-094787-001 | Ejector Actuating Lever | |
47-094789-003 | Retaining Pin | |
47-094792-009 | Universal Pin Station Assembly Complete(Pin Nos. 2,3,4,8, and 9) | |
47-094794-009 | Universal Pin Station Assembly Complete(Pin Nos. 7 and 10) | |
47-094793-009 | Universal Pin Station Assembly Complete(Pin Nos. 1,5, and 6) | |
11-051743-001 | Locknut (6 mm) | |
47-094780-001 | Retaining Bow w/o Flap (Pin Nos. 7 and 10) | |
47-094779-001 | Retaining Bow w/ Flap | |
47-090578-004 | L.H. Torsion Spring | |
47-090577-004 | R.H. Torsion Spring | |
47-095154-009 | Release Lever w/Release Button (includes item 22) | |
47-094785-002 | L.H. Cam Assembly | |
47-094786-002 | R.H. Cam Assembly | |
47-094791-004 | Ejector Tension Spring | |
47-094783-002 | L.H. Ejector Flap | |
47-094784-002 | R.H. Ejector Flap | |
11-055301-001 | Button Head Socket Screw w/Flange (6 mm x 16 mm) | |
11-052037-001 | Flat Washer (6.4 mm) | |
47-094790-003 | N.A. Square Spindle | |
47-094790-009 | R.O. Square Shaft w/Bushing | |
47-094788-003 | Bevel Gear Shaft | |
47-094778-001 | Pin Station Housing - includes index numbers 26, 27 &28 | |
47-094782-003 | Release Button | |
47-862931-000 | Retaining Bow Extender Kit (1 per lane pair) | |
47-095742-004 | Bushing | |
11-676308-000 | Nygel Plastic Lube | |
47-861044-000 | Retaining Rings (Qty. 20) | |
47-861043-000 | Plastic Bushing (Qty. 10) | |
47-861045-000 | Steel Shaft (Qty. 10) | |
11-051858-001 | Retaining Ring (A15) | |
11-054103-001 | N.A. Spacer Washer (16 mm) | |
47-861029-001 | R.O. Washer (16 mm) - Pkg. of 10 | |
47-090555-003 | Spur Gear (Positions 1 and 2) | |
47-093629-003 | Spur Gear (Position 3) | |
47-090553-004 | Intermediate Shaft | |
11-051035-001 | Hex Hd. Cap Screw (6 mm x 16 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
11-430053-000 | Bearing | |
46-090494-004 | Bearing Ring | |
11-052050-001 | Flat Washer (10.5 mm) | |
11-051037-001 | Hex Hd. Cap Screw (10 mm x 16 mm) | |
47-093863-003 | Round Belt Pulley | |
47-275748-009 | 2-Piece Pulley Kit | |
47-092203-004 | Pinned Pulley Shaft | |
47-093883-004 | Clamped Pulley Shaft | |
11-052802-001 | Set Screw (8 mm x 5 mm) | |
47-092300-004 | Polycord (12 mm x 44 Meters long) | |
47-092300-005 | Polycord Roll (13 mm x 20 meters long) | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
47-093874-004 | Clamp | |
11-430013-000 | Bearing | |
11-051010-001 | Hex Hd. Cap Screw (8 mm x 20 mm) | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-051744-001 | Locknut (8 mm) | |
47-094350-001 | Middle Shaft Assembly | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
47-092415-003 | Drive Pulley Assembly | |
47-092206-004 | Rear Shaft | |
47-090552-004 | Shaft | |
47-091855-004 | Spacer | |
47-092207-004 | Front Drive Shaft | |
47-092082-004 | N.A. Spacer | |
11-052901-000 | Bearing Complete w/Retaining Plates | |
11-052802-001 | Set Screw (5 mm x 8 mm) | |
11-051038-001 | Hex Hd. Cap Screw (8 mm x 16 mm) | |
47-094212-004 | Pulley Assembly w/Clam | |
11-052686-001 | Rolled Pin (4 mm x 40 mm) | |
47-090547-004 | Spur Gear w/25 mm Collar | |
47-092300-004 | Polycord (12 mm x 44 m long) | |
47-092300-005 | Polycord Roll (13 mm x 20 meters long) | |
11-051770-001 | Lockwasher (8 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
47-090989-002 | Double Pulley | |
11-053903-000 | V-Belt (8 mm x 13 mm x 1375 mm) | |
11-054102-001 | N.A. Spacer Flat Washer | |
47-861028-001 | R.O. Shim Washers (Pkg. of 10) | |
11-051856-001 | Retaining Ring (A25) | |
11-051044-001 | Hex Hd. Cap Screw (8 mm x 30 mm) | |
47-092193-003 | Pulley Holder | |
47-090974-004 | S.O. Rear Drive Shaft | |
11-051744-001 | Locknut (8 mm) | |
47-091284-002 | Slider Assembly Complete | |
47-097417-000 | A/P Pin Guide Stop | |
47-090969-003 | Pin Stop | |
11-051526-001 | Socket Hd. Cap Screw (6 mm x 30 mm) | |
11-051520-001 | Socket Hd. Cap Screw (6 mm x 20 mm) | |
11-051043-001 | N.A. Hex Hd. Cap Screw (8 mm x 12 mm) | |
11-052019-001 | Flat Washer (8.4 mm) | |
11-051852-001 | Retaining Ring (17 mm) | |
47-092137-003 | Aluminum Drive Pulley | |
47-090975-003 | N.A. Mounting Plate | |
11-051027-001 | Hex Hd. Cap Screw (5 mm x 40 mm) | |
11-052005-001 | Flat Washer (5.3 mm) | |
11-051742-001 | Locknut (5 mm) | |
47-092415-003 | Pulley w/Bearing | |
47-093547-004 | Spur Gear w/Bearing | |
11-051743-001 | Locknut (6 mm) | |
11-052008-001 | Flat Washer (6.4 mm) | |
47-091512-003 | N.A. Flat Spring | |
47-093874-004 | Clamp | |
47-093587-004 | Dowel Pin (Pkg. of 25) | |
11-051858-001 | Retaining Ring (A15) | |
11-054103-001 | N.A. Spacer Washer (16 mm) | |
47-861029-001 | R.O. Spacer Washer (16 mm) Pkg. of 10. | |
47-090555-003 | N.A. Spur Gear (Positions 1 and 2) | |
47-093629-003 | Spur Gear (Position 3) | |
47-090553-004 | Intermediate Shaft | |
11-051035-001 | Hex Hd. Cap Screw (6 mm x 16 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
11-430053-000 | Ball Bearing | |
46-090494-004 | Bearing Ring | |
11-052050-001 | Flat Washer (10.5 mm) | |
11-051037-001 | Hex Hd. Cap Screw (10 mm x 16 mm) | |
47-092416-003 | N.A Pulley | |
47-275748-009 | 2-Piece Pulley Kit | |
47-090536-003 | Shaft | |
47-092300-004 | Polycord (12 mm) | |
47-092300-005 | Polycord Roll (13 mm x 20 meters long) | |
11-052802-001 | Set Screw (5 mm x 8 mm) | |
11-052686-001 | Rolled Pin (4 mm x 40 mm) | |
47-091182-001 | N.A. Adjustable Pin Separator | |
47-091173-001 | N.A. Pin Separator Assembly (3 piece) | |
47-094675-009 | N.A. Pin Separator (front) | |
47-094676-009 | N.A. Pin Separator (middle) | |
47-094677-009 | N.A. Pin Separator (rear) | |
47-091174-004 | N.A. Sleeve | |
47-091175-004 | N.A. Spacer | |
47-091176-004 | N.A. Shaft | |
47-091177-004 | N.A. Bearing Plate | |
47-091178-004 | N.A. Plate | |
47-091179-004 | N.A. Spacer | |
47-091181-004 | Tension Spring | |
11-051702-001 | Hex Nut (6 mm) | |
11-051042-001 | Hex Hd. Cap Screw (6 mm x 50 mm) | |
11-051034-001 | Hex Hd. Cap Screw (8 mm x 45 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
11-051795-001 | Cotter Pin (1.6 mm x 16 mm) | |
11-051035-001 | Hex Hd. Cap Screw (6 mm x 16 mm) | |
11-052008-001 | Flat Washer (6.4 mm) | |
11-051743-001 | Locknut (6 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-051770-001 | Lockwasher (8 mm) | |
47-092139-001 | N.A. Plate | |
47-041792-004 | Tension Spring | |
47-092140-001 | N.A. Pin | |
47-092138-001 | Plate | |
47-092144-001 | N.A. Plate | |
47-092145-001 | N.A. Plate | |
11-053482-001 | Speed Nut (6 mm) | |
11-051880-001 | N.A. Truss Hd. Sltd. Screw (6 mm x 16 mm) | |
47-861008-001 | R.O. Truss Hd. Sltd. Screw (6 mm x 16 mm) Pkg. of 10 | |
11-051035-001 | Hex Hd. Cap Screw (6 mm x 16 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
11-051702-001 | Hex Nut (6 mm) | |
11-051772-001 | Lockwasher (12 mm) | |
11-051540-001 | Socket Hd. Cap Screw (12 mm x 20 mm) | |
47-090773-004 | N.A. Shaft | |
47-092085-004 | N.A. Angle Bracket | |
11-051743-001 | Locknut (6 mm) | |
11-052038-001 | Flat Washer (21 mm) | |
11-052036-001 | Flat Washer (15 mm) | |
11-051786-001 | Cotter Pin (2.5 mm x 25 mm) | |
47-092046-004 | Tension Spring | |
11-051515-001 | Socket Hd. Cap Screw (6 mm x 18 mm) | |
11-053155-001 | Hex Hd. Jam Nut (6 mm) | |
11-051032-001 | Hex Hd. Cap Screw (8 mm x 55 mm) | |
47-092045-004 | Bearing Holder | |
47-092044-004 | N.A. Shaft Plate | |
47-090856-001 | N.A. Flap | |
11-051704-001 | Hex Nut (8 mm) | |
11-430049-000 | Bearing | |
11-053480-001 | Speed Nut (10 mm) | |
47-090791-001 | Head Centering Flap | |
47-091501-003 | N.A. Mounting Plate | |
11-052048-001 | Flat Washer (6.4 mm) | |
47-092072-002 | N.A. Pin Head Centering Device Assembly Complete | |
47-092043-001 | N.A. Head Centering Flap | |
47-051491-004 | Tension Spring | |
47-092045-004 | Bearing Holder | |
47-092053-004 | N.A. Double Shaft Assembly | |
11-052802-001 | Set Screw (5 mm x 8 mm) | |
11-053622-001 | Stop Collar (8 mm x 16 mm x 8 mm) | |
11-430049-000 | Bearing | |
11-053478-001 | N.A. Speed Nut (8 mm) | |
47-861050-000 | R.O. Speed Nut (8 mm) Pkg. of 10 | |
47-092052-003 | N.A. Mounting Plate | |
11-053480-001 | Speed Nut (10 mm) | |
47-093863-003 | Round Belt Pulley (132 mm) - use 12 mm PolycordBelt | |
47-275748-009 | 2-Piece Pulley Kit | |
47-093874-004 | Pulley Clamp | |
47-093900-003 | Spur Gear (one piece) | |
47-274669-004 | Repair Kit, Distributor 2-Piece Pulley | |
11-052801-001 | Set Screw (6 mm x 6 mm) | |
11-430013-000 | Bearing | |
11-051038-001 | Hex Hd. Screw (8 mm x 20 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-051744-001 | Lock Washer (8 mm) | |
47-094346-003 | Bearing Shell w/ Shoulder | |
47-094351-003 | Washer | |
47-094347-003 | Bearing Shell | |
47-094348-001 | Rear Distributor Shaft Assembly | |
47-274669-004 | Spur Gear (two piece) | |
11-051743-001 | Hex Nut (6 mm) | |
11-052008-001 | Washer (6.4 mm) | |
46-030121-004 | Link | |
11-051028-001 | Hex Hd. Cap Screw (6 mm x 25 mm) | |
47-095050-003 | Plastic Bearing | |
47-092300-004 | Poly Cord (12 mm x 44 Meters long) | |
47-024839-002 | Round Belt Pulley (162 mm) - use 15 mm PolycordBelt | |
47-093929-001 | L.H.Pin Guide Wedge | |
11-051852-001 | Retaining Ring (17 mm) | |
47-092415-003 | Drive Belt Pulley | |
11-052808-001 | Socket Set Screw (8 mm x 40 mm) | |
47-094072-003 | R.H. Side Plate | |
11-052019-001 | Flat Washer (8.4 mm) | |
47-013924-003 | N.A. Elevator Bracket w/o Rubber Mount (336 mm long) | |
47-014354-003 | Elevator Z-Bracket w/o Rubber Mount (321 mm long) | |
11-051770-001 | Lockwasher (8 mm) | |
11-052008-001 | Flat Washer (6.4 mm) | |
47-093906-001 | R.H. Pin Guide Wedge | |
47-093925-004 | Spacer | |
11-051053-001 | Hex Hd. Machine Screw (8 mm x 40 mm) | |
11-051001-001 | Hex Hd. Machine Screw (6 mm x 12 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
47-093898-003 | Guide | |
11-052686-001 | Roll Pin (4 mm x 40 mm) | |
47-093899-003 | Gear | |
47-094326-004 | Flange | |
11-052605-001 | N.A. Carriage Bolt (6 mm x 16 mm) | |
47-861020-001 | R.O. Carriage Bolt (6 mm x 16 mm) Pkg. of 5 | |
47-094095-002 | Fin Switch Complete | |
11-430007-000 | Bearing | |
47-093962-004 | Tension Spring | |
11-053478-001 | N.A. Speed Nut (8 mm)47-861050-00 R.O. Speed Nut (8 mm) Pkg. of 10 | |
47-093908-002 | Pin Guide Housing | |
47-093905-004 | Shaft | |
47-093894-003 | Pin Guide Wires Complete | |
47-092206-004 | Shaft | |
47-094035-003 | L.H. Side Plate | |
11-052803-001 | Set Screw (6 mm x 10 mm) | |
47-093985-002 | Extensions (short pit) | |
47-092249-002 | Extensions (long pit) | |
47-093891-003 | N.A. Mounting Plate | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-051038-001 | Hex Hd. Machine Screw (8 mm x 16 mm) | |
47-094212-004 | Pulley Assembly w/Clam | |
47-093874-004 | Pulley Clamp | |
47-093928-004 | Drive Shaft | |
11-051744-001 | Locknut (8 mm) | |
11-051702-001 | Hex Nut (6 mm) | |
47-093934-003 | Pin Deflector Shoe - Single Piece | |
11-051072-001 | Hex Hd. Machine Screw (6 mm x 14 mm) | |
47-093920-000 | N.A. Shark Switch Assembly Complete | |
47-093911-003 | L.H. Shark Rail | |
47-093910-003 | R.H. Shark Rail | |
11-052037-001 | Flat Washer (6.4 mm) | |
47-274659-009 | N.A. Shark Switch Shaft Assembly | |
11-051743-001 | Nylok Nut (6 mm) | |
11-052850-000 | Set Screw (6 mm x 20 mm) | |
11-053579-000 | Rubber Mount | |
47-094232-004 | Rubber Grommet | |
47-092300-004 | Poly Cord (12 mm x 44 Meters long) | |
11-051742-001 | Nut (5 mm) | |
11-052039-001 | Flat Washer (5.3 mm) | |
47-094713-004 | Return Spring | |
47-094264-004 | Solenoid Link | |
11-053476-001 | Speed Nut (4 mm) | |
11-052021-001 | Flat Washer (4.3 mm) | |
47-094265-004 | Spacer | |
47-094270-004 | See Saw (Teeter) | |
11-051004-001 | N.A. Hex Head Screw (5 mm x 25 mm) | |
47-861001-001 | R.O. Hex Head Screw (5 mm x 25 mm) Pkg. of 10 | |
47-093905-004 | Shaft | |
11-052850-000 | Socket Set Screw (6 mm x 20 mm) | |
11-051743-001 | Locknut (6 mm) | |
11-051035-001 | Hex Head Machine Screw (6 mm x 16 mm) | |
47-093908-002 | Pin Guide Housing | |
47-094095-002 | Fin Switch Complete | |
11-051769-001 | Washer (6 mm) | |
11-053478-001 | N.A. Speed Nut (8 mm) | |
47-861050-000 | R.O. Speed Nut (8 mm) Pkg. of 10 | |
11-052003-001 | Flat Washer (8.4 mm) | |
11-051038-001 | Hex Hd. Machine Screw (8 mm x 16 mm) | |
11-051089-001 | N.A. Hex Head Cap Screw (5 mm x 45 mm) | |
47-094704-003 | Solenoid Bracket | |
99-060133-004 | Solenoid Plunger | |
11-051558-001 | N.A. Hex Head Machine Screw (5 mm x 55 mm) | |
99-060242-004 | Solenoid (silver and consolidated electronics box) | |
47-093891-003 | N.A. Mounting Plate (includes Weldnut) | |
11-051701-001 | Hex Nut (5 mm) | |
47-094722-001 | N.A. Smart Shark Assembly Complete | |
47-095108-001 | Shark Switch Assembly | |
47-095104-001 | R.H.Guide | |
47-095103-001 | L.H. Guide | |
47-092300-004 | Polycord (12 mm x 44 Meters Long) | |
47-095101-001 | N.A. Round Belt Geared Pulley | |
47-095744-004 | R.O. Round Belt Geared Pulley - Complete | |
99-060387-004 | Solenoid - only (consolidated and nexgen electronics box) | |
47-095105-003 | Slide | |
47-095106-001 | Fin Switch | |
47-095107-003 | Housing | |
47-095112-004 | Spacer - short | |
47-095109-004 | Spacer - long | |
11-053579-000 | Rubber Mount | |
47-095111-004 | Solenoid Plunger | |
11-051081-001 | Hex Hd. Cap Screw (8 mm x 100 mm) | |
11-052006-001 | Washer (8.4 mm) | |
11-051010-001 | Hex Hd. Cap Screw (8 mm x 20 mm) | |
11-051704-001 | Hex Nut (8 mm) | |
11-051744-001 | Lock Nut (8 mm) | |
11-051770-001 | Lock Washer (8 mm) | |
47-093906-001 | R.H. Pin Guide Wedge | |
47-093929-001 | L.H. Pin Guide Wedge | |
11-051026-001 | Hex Hd. Cap Screw (8 mm x 40 mm) | |
11-052019-001 | Flat Washer (8.4 mm) | |
47-093925-004 | Spacer | |
99-090348-004 | Spring | |
11-430007-000 | Bearing | |
99-090349-004 | O-Ring | |
11-054459-000 | Plastic Torx Tapping Screw (K16 x 16 mm) | |
47-095745-004 | Round Belt Pulley - Non Geared | |
68-100051-000 | Setting Table Cable Assembly (female to female) | |
68-100180-000 | Setting Table Motor Cable Assembly | |
68-100181-000 | N.A. Sweep Motor Cable Assembly | |
68-100182-000 | N.A. Elevator Motor Cable Assembly | |
68-100053-000 | N.A. L.H. Function Solenoid & Switches Cable Assembly | |
68-100160-000 | N.A. High Voltage Box To Common Box Cable Assembly (L.H. machine) | |
68-100044-000 | N.A. Switch Data Cable Assembly (Lane No. 1) | |
47-192952-000 | Foul & Optical Trigger Cable Assembly | |
68-100158-000 | N.A. Switch Data Cable Assembly (Lane No. 2) | |
68-100046-000 | Solenoid Data Cable Assembly (Lane No. 1) | |
68-100157-000 | N.A. Solenoid Data Cable Assembly (Lane No. 2) | |
68-100159-000 | N.A. Manager’s Remote “On” Cable Assembly | |
68-100050-000 | N.A. Player Control Cable Assembly | |
68-100061-000 | N.A. Ball Lift Control Cable Assembly (box 2) | |
68-100385-000 | N.A. R.H. Trouble Light & Ball Door Cable Assembly | |
68-100176-000 | N.A. Rear Control Box Cable Assembly | |
53-200871-000 | Masking Unit Cable Assembly | |
68-100178-000 | N.A. Ball Accelerator Motor Cable Assembly | |
47-862706-000 | N.A. High Voltage Box Complete | |
47-862708-402 | N.A. Gamesetter Box Assembly | |
47-862707-000 | N.A. Common Box Complete | |
68-100160-010 | High Voltage Box to Common Box Cable Assembly (right-hand machine) | |
47-862717-000 | Foul to Optical Trigger Cable Assembly | |
68-100379-000 | Table Motor Cable Assembly | |
68-100380-000 | Sweep Motor Cable Assembly | |
68-100381-000 | Elevator Motor Cable Assembly | |
47-182500-000 | N.A. L.H. Side Function Solenoids & Switches Cable Assembly | |
47-243069-004 | Setting Table Cable Assembly (male and female ends) | |
53-200871-000 | Masking Unit Cable Assembly (male and female ends) | |
68-100176-000 | N.A. Rear Control Box Cable Assembly | |
68-100385-000 | R.H. Trouble Light & Ball Door Switch Assembly | |
68-100192-000 | N.A. Ball Accelerator Motor Cable Assembly | |
68-100193-000 | Gamesetter Power Cable Assembly | |
68-100199-000 | N.A. R.H. Ball Rack Reset Cable Assembly | |
68-100382-000 | N.A. L.H Common Box Remote “ON” Cable Assembly | |
68-100044-000 | N.A. Switch Data Cable Assembly (Lane No. 1) | |
68-100046-000 | Solenoid Data Cable Assembly (Lane No. 1) | |
68-100158-000 | N.A. Switch Data Cable Assembly (Lane No. 2) | |
68-100157-000 | N.A. Solenoid Data Cable Assembly (Lane No. 2) | |
68-100383-000 | R.H. Common Box Remote “ON” R.H. Cable Assembly | |
47-192952-000 | Foul & Optical Trigger Cable Assembly (Silver Box and Universal Voltage Silver Box) | |
68-100050-000 | N.A. Player Control Cable Assembly | |
68-100061-000 | N.A. Ball Lift Control Cable Assembly | |
11-680027-000 | Twist Lock Receptacle | |
47-862735-000 | Power Adaptor Cable Assembly | |
47-862712-000 | N.A. High Voltage Box Assembly Complete | |
47-162839-000 | High Voltage PCB Assembly (Smart Shark) | |
47-862711-401 | N.A. Gamesetter Box Assembly w/Smart Shark Complete | |
47-862801-000 | N.A. Gamesetter I/O PCB Assembly Rapid Exchange | |
47-862745-000 | N.A. Common Box Assembly Complete | |
47-862743-000 | N.A. External Cable Package-GS-92 Pinsetters (includes index numbers 11,15,16,18, and 19, also includes 1 each of Ball Lift Adapter Cable 68-100272-000) | |
68-100273-000 | Pinsetter to High Voltage Ground Cable Assembly | |
11-612030-000 | N.A. Terminal | |
11-612029-000 | N.A. Terminal | |
47-862717-000 | Foul to Optical Trigger Cable Assembly | |
47-243071-000 | Rear Control Box w/Cable Assembly (Consolidated) | |
11-680302-000 | N.A. Terminal | |
57-860032-000 | R.O. Terminal - Male (Pkg. of 10) | |
11-680107-000 | N.A. Connector (6 circuit) | |
11-615013-000 | Push Button Switch | |
11-615515-000 | Toggle Switch | |
47-243072-004 | N.A. Rear Control Box | |
68-100276-000 | N.A. Rear Control Box Cable Assembly | |
47-243070-004 | N.A. Rear Control Plate | |
11-612012-000 | N.A. Terminal | |
68-100178-000 | N.A. Plug Assembly w/Pin Contacts for Ball Accelerator Motor (172”) | |
68-100180-000 | Plug Assembly w/Pin Contacts for Table Motor (106”) | |
68-100181-000 | N.A. Plug Assembly w/Pin Contacts for Sweep Motor (87”) | |
68-100182-000 | N.A. Plug Assembly w/Pin Contacts for Elevator Motor (64”) | |
47-243071-003 | Rear Control Box w/Cable Assembly | |
11-680107-000 | N.A. Connector (6 Circuit) | |
11-680302-000 | N.A. Terminal | |
57-860032-000 | R.O. Terminal - Male (Pkg. of 10) | |
11-615013-000 | Push Button Switch | |
11-615515-000 | Toggle Switch | |
47-243072-004 | N.A. Rear Control Box | |
47-243071-000 | R.O. Rear Control Box (Consolidated) | |
68-100276-000 | N.A. Rear Control Box Cable Assembly | |
11-697328-000 | N.A. Connector | |
47-192952-000 | Foul & Optical Trigger Cable Assembly | |
47-243070-004 | Rear Control Plate | |
11-680201-000 | Connector | |
11-680301-000 | N.A. Terminal | |
57-860031-000 | R.O. Terminal - Female (Pkg. of 20) | |
68-100384-000 | L.H. Side Function Solenoid & Switches Cable Assembly - Universal | |
68-100053-000 | N.A. L.H. Side Function Solenoid & Switches Cable Assembly - Silver Box | |
11-615080-000 | N.A. Connector | |
11-615101-000 | Terminal | |
11-680216-000 | Connector | |
11-680301-000 | N.A. Terminal | |
57-860031-000 | R.O. Terminal - Female (Pkg. of 20) | |
11-603108-000 | N.A. Cable Tie (3-5/8”) | |
68-100385-000 | N.A. R.H. Side Switches, Trouble Light & Ball Door Cable Assembly | |
11-615075-000 | N.A. Connector | |
11-615127-000 | Cable Clamp | |
11-615102-000 | N.A. Contact | |
68-100051-000 | Setting Table Cable Assembly Complete (both female ends) | |
11-615127-000 | Cable Clamp | |
11-615102-000 | N.A. Contact | |
11-697208-000 | N.A. Connector | |
11-680322-000 | N.A. Terminal | |
57-860042-000 | R.O. Terminal - Female (Pkg. of 20) Cable Assembly | |
68-100193-000 | Gamesetter Power & Peripheral Control Cable Assembly | |
11-615080-000 | N.A. Connector | |
11-615101-000 | Terminal | |
11-697208-000 | N.A. Connector | |
11-680322-000 | N.A. Socket Terminal | |
57-860042-000 | R.O. Terminal - Female (Pkg. of 20) | |
47-243069-004 | Setting Table Cable Assembly (male and female ends) | |
11-703529-000 | N.A. Connector | |
11-615127-000 | Cable Clamp | |
11-615075-000 | N.A. Connector | |
11-615102-000 | Terminal | |
11-697327-000 | N.A. Connector | |
11-697321-000 | N.A. Connector | |
68-100044-000 | N.A. Switch Data Cable Assembly (lane 1) | |
68-100158-000 | N.A. Switch Data Cable Assembly (lane 2) | |
68-100046-000 | Solenoid Data Cable Assembly (lane 1) | |
68-100157-000 | N.A. Solenoid Data Cable Assembly (lane 2) | |
47-862733-000 | Butterfly Board Complete (Brunswick Rapid Exchange) | |
47-862734-000 | N.A. Player Control PCB Pkg. (Brunswick Rapid Exchange) | |
11-185276-000 | N.A. Round Spacer | |
11-192011-000 | Flat Washer | |
11-125003-001 | Hex Nut | |
11-190004-001 | Flat Washer | |
11-176007-001 | Keps Nut w/Lockwasher | |
11-680985-000 | N.A. Connector | |
11-680996-000 | N.A. Metal Shield Cover | |
11-680981-000 | Pin | |
11-680988-000 | N.A. Screw Retainer Kit | |
11-680326-000 | Terminal | |
11-697611-000 | Connector | |
11-612006-000 | Terminal | |
68-100050-000 | N.A. Player Control Station Cable Assembly | |
11-680116-000 | Connector | |
11-680302-000 | N.A. Terminal | |
57-860032-000 | R.O. Terminal - Male (Pkg. of 10) | |
11-680117-000 | Connector | |
68-100061-000 | N.A. Ball Lift Control Cable Assembly | |
57-214920-000 | N.A. Reflector and Bracket Assembly | |
57-214921-000 | N.A. Ball Detector Assembly | |
99-080220-004 | N.A. Ball Detector Assembly | |
99-086293-000 | N.A. Pkg. Ball Detect Complete w/Bracket & Hardware | |
99-087141-000 | R.O. Pkg. Ball Detect Complete w/Bracket & Hardware | |
57-214901-000 | N.A. Bracket | |
17-600771-000 | N.A. Reflector and Housing Assembly | |
11-190004-001 | Flat Washer (#8) | |
11-195008-001 | Lockwasher (#8) | |
11-012308-001 | Pan Hd. Machine Screw (#8-32 x 3/8”) | |
17-600770-000 | N.A. Reflector Housing | |
17-600773-000 | N.A. Plate | |
53-600101-000 | Reflector | |
11-013007-001 | N.A. Sltd. Pan Hd. Machine Screw (#4-40 x 9/16”) | |
11-195004-001 | N.A. Lockwasher (#4) | |
11-125000-001 | Hex Nut (#4) | |
11-082092-001 | N.A. Self Tapping Screw (#10 x 1/2”) | |
11-195010-001 | Lockwasher (#10) | |
11-190006-001 | Flat Washer (#10) | |
57-214900-000 | Mounting Bracket | |
11-013060-001 | Pan Hd. Machine Screw (#8-32 x 1/2”) | |
11-086307-001 | Sltd. Flat Hd. Machine Screw (#4 x 1”) | |
57-214904-000 | N.A. Photo Cell & Cable Assembly | |
99-080194-004 | N.A. Photo Cell & Cable Assembly | |
99-086292-000 | N.A. Pkg. Ball Detect Single Unit w/Hardware | |
99-087140-000 | R.O. Pkg. Ball Detect Single Unit w/Hardware | |
99-080186-003 | Housing | |
99-080180-004 | Compression Spring | |
11-680101-000 | Connector | |
11-680302-000 | N.A. Terminal | |
57-860032-000 | R.O. Terminal - Male (Pkg. of 10) | |
47-223102-004 | N.A. Reflector | |
47-225846-004 | R.O. Reflector | |
11-054780-000 | N.A. Slotted Pan Hd. Self Tapping Screw (4.2mm x 16mm) | |
99-200212-004 | N.A. Reflector Bracket | |
99-200222-004 | Reflector and Bracket Assembly | |
47-225846-004 | Reflector Tape | |
57-860507-000 | Reflector and hardware Pkg. (includes Index Nos. 1, 3 & 8) | |
68-100192-000 | N.A. Ball Accelerator Motor Cable Assembly | |
11-615079-000 | N.A. Connector | |
11-612577-000 | Terminal | |
11-612012-000 | N.A. Terminal | |
11-615127-000 | Cable Clamp | |
11-614452-000 | N.A. Keying Plug | |
68-100379-000 | Table Motor Cable Assembly | |
68-100380-000 | Sweep Motor Cable Assembly | |
68-100381-000 | Elevator Motor Cable Assembly | |
11-680105-000 | N.A. Connector | |
11-680302-000 | N.A. Terminal | |
57-860032-000 | R.O. Terminal - Male (Pkg. of 10) | |
11-680116-000 | Connector | |
68-100199-000 | N.A. R.H. Ball Rack Reset Cable Assembly | |
11-680301-000 | N.A. Terminal | |
57-860031-000 | R.O. Terminal - Female (Pkg. of 20) | |
11-680101-000 | Connector Plug | |
68-100383-000 | R.H. High Voltage Box to Common Box | |
68-100387-000 | Power Adapter Cable Assembly | |
11-615081-000 | N.A. Connector | |
11-612576-000 | Terminal | |
11-615127-000 | Cable Clamp | |
11-680028-000 | Connector | |
11-680027-000 | Connector | |
11-680106-000 | N.A. Connector | |
11-680302-000 | N.A. Terminal | |
57-860032-000 | R.O. Terminal - Male (Pkg. of 10) | |
47-223093-000 | N.A. Counter (non-resettable) | |
47-223094-000 | Counter (resettable) | |
47-223095-000 | Failure Lamp Assembly | |
47-223096-000 | Failure Lamp Bulb | |
47-223097-000 | Push Button Assembly w/Lamp | |
47-223098-000 | On-Off Lamp Assembly - Universal High Voltage Box Assembly | |
47-162856-000 | N.A. Transformer Assembly | |
47-862712-000 | N.A. High Voltage Box Assembly | |
47-162939-000 | Transformer Assembly | |
11-615515-000 | Toggle Switch | |
47-862502-000 | N.A. PCB Assembly - Note: Electronic Repair Center services this item as part number 47-162839-800. | |
47-162942-000 | N.A. Power Panel Assembly | |
11-671513-000 | Contactor | |
11-671514-000 | Relay Contactor | |
11-671531-000 | N.A. Relay | |
11-671003-000 | R.O. Overload Relay | |
11-671532-000 | N.A. Relay | |
11-671521-000 | N.A. Relay Contactor | |
12-502527-000 | N.A. Switch Guard | |
47-162821-000 | N.A. Keyswitch Assembly | |
47-162937-000 | N.A. Power Cord Assembly | |
68-100273-000 | Ground Cable Assembly | |
47-162514-000 | N.A. Mounting Bracket | |
11-601800-000 | N.A. Quick Lock Stud w/Locking Ring | |
11-601850-000 | N.A. Quick Lock Receptacle w/Locknut | |
47-162600-000 | N.A. Label “Overload Breaker Adjustment” | |
11-615013-000 | Momentary Switch | |
47-862711-401 | N.A. Gamesetter Box Assembly Complete w/Smart Shark | |
47-862708-402 | N.A. Gamesetter Box Assembly N./A. Smart Shark CPU PCB Assembly (Brunswick Rapid Exchange) | |
47-862782-402 | N.A. Silver Box CPU PCB Assembly (Brunswick Rapid Exchange) | |
47-862801-000 | N.A. I/O PCB Assembly - Universal Voltage Silver Box | |
47-862785-000 | I/O PCB Assembly - Silver Box | |
47-142833-000 | N.A. Keyswitch Assembly | |
47-862503-000 | R.O. Key Switch Assembly | |
47-142830-000 | N.A. Switch Assembly | |
11-652052-000 | N.A. Rubber Washer (3/16) | |
11-601800-000 | N.A. Quick Lock Stud w/Locking Ring | |
47-142832-000 | N.A. Ribbon Cable Assembly | |
11-679604-000 | N.A. Vibration Insulator | |
12-502527-000 | N.A. Switch Guard | |
11-601850-000 | N.A. Quick Lock Receptacle w/Locknut | |
47-172844-000 | N.A. Transformer Assembly | |
11-679603-000 | N.A. Vibration Insulator | |
10-900901-000 | N.A. Label “Patent Pending” | |
47-172523-000 | N.A. Label “Serial Number” | |
12-502527-000 | N.A. Switch Guard | |
57-214276-007 | Fastener | |
11-696609-000 | Push Button Relay (24V) | |
11-696630-000 | N.A. Circuit Breaker | |
11-696628-000 | Circuit Breaker | |
11-696610-000 | N.A. Relay | |
47-862707-000 | N.A. Common Box Assembly (Brunswick Rapid Exchange) | |
11-671513-000 | Contactor | |
11-671532-000 | N.A. Relay | |
11-671002-000 | R.O. Overload Relay | |
47-862783-000 | PCB Assembly | |
47-172912-000 | Transformer Assembly | |
57-214276-007 | Spring Latch | |
11-615510-000 | N.A. Toggle Switch | |
12-502527-000 | N.A. Switch Guard | |
11-696610-000 | N.A. Relay | |
11-696628-000 | Circuit Breaker | |
11-696630-000 | N.A. Circuit Breaker | |
11-696626-000 | N.A. Circuit Breaker | |
11-696678-000 | N.A. Relay Mounting Clip | |
47-862745-000 | N.A. Common Box Assembly (Brunswick Rapid Exchange) | |
47-200471-002 | N.A. Low Voltage Box Assembly Complete | |
47-203137-000 | N.A. Low Voltage Box Assembly w/o PCBs | |
47-223105-000 | N.A. Amphenol Plug (11 position) | |
47-203139-000 | N.A. Amphenol Socket (6 position) | |
47-213135-000 | N.A. Amphenol Plug (8 position) | |
47-242940-003 | N.A. Cable w/Molex Socket | |
47-223108-000 | N.A. Amphenol Cap | |
47-203141-000 | N.A. Fuse | |
47-203005-003 | N.A. PCB Number 9 Assembly | |
46-200582-004 | N.A. Transformer | |
45-200107-004 | PCB number 8 (power supply) | |
47-200431-002 | N.A. PCB numbers 1 & 2 | |
47-200432-002 | PCB number 3 | |
47-200433-002 | N.A. PCB number 4 | |
47-200434-002 | PCB number 5 | |
47-200435-002 | PCB number 6 | |
47-200436-002 | PCB number 7 | |
47-210475-002 | N.A. High Voltage Box Assembly Complete (380V) | |
47-213122-000 | N.A. High Voltage Box Assembly Complete (220V) | |
47-213123-000 | N.A. Overload Breaker (1.0 Amp) | |
47-213124-000 | N.A. Overload Breaker (1.5 Amp) | |
47-213125-000 | N.A. Overload Breaker (1.8 Amp) | |
47-213126-000 | N.A. Overload Breaker (2.0 Amp) | |
47-213127-000 | N.A. Overload Breaker (2.5 Amp) | |
47-213128-000 | N.A. Overload Breaker (3.5 Amp) | |
47-213129-000 | N.A. Contactor | |
47-213130-000 | S.O. Relay | |
47-223108-000 | N.A. Amphenol Cap | |
47-223105-000 | N.A. Connector | |
47-213132-000 | N.A. Push Button | |
47-213133-000 | N.A. Main Switch | |
47-223093-000 | N.A. Counter (non-resettable) | |
47-223094-000 | Counter (resettable) | |
47-223095-000 | Failure Lamp Assembly with Bulb | |
47-223096-000 | Failure Lamp Bulb | |
47-223097-000 | Push Button Assembly with Lamp | |
47-223098-000 | On-Off Lamp | |
47-223100-000 | N.A. Switch Knob Assembly | |
47-223103-000 | N.A. Rotary Switch | |
47-223104-000 | N.A. Relay | |
47-223105-000 | Connector | |
47-223106-000 | N.A. Diode | |
47-223049-001 | Screening Foil | |
47-223048-001 | N.A. Spacer Plate | |
47-223113-000 | Key | |
47-223114-000 | N.A. Switch | |
47-223046-002 | N.A. Printed Circuit Board Assembly | |
47-223115-000 | N.A. LED | |
47-223064-004 | Ribbon Cable Assembly | |
11-051746-001 | Locknut (3 mm) | |
11-052055-001 | N.A. Flat Washer (3.2 mm) | |
47-861013-001 | R.O. Flat Washer (3.2 mm) Pkg. of 20 | |
47-223118-000 | N.A. Spacing Bolt (3 mm x 8 mm) | |
11-052457-001 | N.A. Sltd. Flat Hd. Machine Screw (3 mm x 30 mm) | |
47-861019-001 | R.O. Sltd. Flat Hd. Machine Screw (3 mm x 30 mm) Pkg. of 20 | |
47-223121-000 | N.A. Resistor | |
47-223106-000 | N.A. Diode | |
47-223050-002 | N.A. Player Control Board Complete | |
47-223004-004 | N.A. Player Control Box Assembly Complete | |
47-223105-000 | N.A. Connector | |
47-223108-000 | N.A. Amphenol Cap | |
99-080224-004 | N.A. Foul Photocell 0.3m Cable (with AS-80) | |
99-080243-004 | N.A. Replacement Kit for Trigger & Foul Photocell 0.12m Cable (with or without AS-80) | |
99-086292-000 | R.O. Pkg. Ball Detect Single Unit w/Hardware | |
99-080186-003 | Housing | |
99-080215-004 | N.A. Trigger Photocell 3.6m cable (with or with o AS-80) | |
57-214904-000 | R.O. Photocell and Cable Assembly | |
99-080216-004 | N.A. Foul Photocell 22m Cable (without AS-80) | |
99-080180-004 | Compression Spring | |
47-223068-004 | N.A. PCB Assembly | |
47-223091-000 | Lamp (24V) | |
47-223057-004 | N.A. PCB Assembly | |
47-242944-000 | N.A. Cable | |
47-223074-004 | Pin Light Assembly Complete (red box) | |
47-203152-000 | Bulb (White) | |
47-203147-000 | Starter | |
11-051060-001 | Hex Hd. Cap Screw (6 mm x 70 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
47-083699-004 | N.A. Spacer | |
47-201385-004 | N.A. Remote Control Box Assembly | |
47-203148-000 | N.A. Push Button (Green) | |
47-203149-000 | N.A. Push Button (Black) | |
47-203150-000 | N.A. Magnetic Switch Assembly | |
47-223105-000 | N.A. Amphenol Plug (11 Pin) | |
45-240163-004 | N.A. Common Cable for Accelerator (2 pin, 4m long) | |
47-223013-004 | N.A. Ball Rack Common Cable | |
47-241387-004 | N.A. Setting Table Harness (red box) - 3 pin connector | |
47-241379-004 | Setting Table Connection Cable | |
47-241375-004 | N.A. Switch Cable Harness (E,G,H,KK,U1 & U2) | |
47-241377-004 | N.A. KSE Cable (8 pin) | |
47-241395-004 | N.A. KSS Cable (11 pin) | |
47-223061-004 | N.A. T2 Cable (11 pin) | |
47-241376-004 | N.A. Solenoid Cable Harness | |
47-223011-004 | N.A. Elevator Motor Cable | |
47-223010-004 | N.A. Sweep Motor Cable (Red Box) | |
47-223009-004 | Table Motor Cable | |
47-223012-004 | N.A. Accelerator Motor Cable | |
47-243017-004 | N.A. Lane Cable Adaptor (key) | |
47-243016-004 | N.A. Photocell Adaptor | |
47-862841-000 | N.A. GS Consolidated Electronics High Voltage Box Assembly (includes Mount and Mounting Hardware) | |
11-651024-000 | N.A. Grommet (2.5 Dia.) | |
11-170005-001 | Hex Nut (#10-24) | |
11-615760-000 | N.A. End Cap | |
11-615759-000 | Terminal Block | |
11-671513-000 | Contactor - (24V) | |
47-142599-000 | Mounting Rail (short) | |
47-862838-000 | N.A. Ball Accelerator Contactor Mounting Plate Assembly | |
47-142601-000 | N.A. Relay Mounting Plate | |
11-012060-001 | N.A. Pan Head C.R. Screw with Lockwasher (#8-32 x 1/2”) | |
11-012057-001 | Pan Head C.R. Screw with Lockwasher (#8-32 x 5-16”) | |
68-100481-000 | Ground Cable Assembly | |
47-142564-000 | Transformer Assembly | |
11-012271-001 | Pan Head C.R. Screw (#6-32 x 5/16”) | |
11-697214-000 | N.A. Connector | |
11-680322-000 | N.A. Terminal | |
57-860042-000 | R.O. Terminal (Pkg. of 20) | |
47-142605-000 | Transformer Assembly | |
11-014144-001 | Flat Head Slotted Screw (1/4-20 x 1/2”) | |
11-697208-000 | N.A. Connector | |
11-125003-001 | Hex Nut (#8-32) | |
47-862839-000 | N.A. R.H. Relay Mounting Plate Assembly | |
47-862840-000 | N.A. L.H. Relay Mounting Plate Assembly | |
11-191012-001 | Flat Washer (5/16) | |
11-001176-001 | N.A. Hex Head Cap Screw (1/4-20 x 3/8”) | |
47-142585-000 | N.A. Ball Accelerator Motor Power Cable Assembly | |
11-696715-000 | Connector | |
11-696737-000 | Terminal | |
11-686128-000 | N.A. Utility Outlet | |
11-615515-000 | Toggle Switch | |
47-142594-000 | Switch Guard | |
47-142586-000 | Table Motor Power Cable Assembly | |
11-696714-000 | N.A. Connector | |
47-142587-000 | Sweep Motor Power Cable Assembly | |
11-696716-000 | N.A. Connector | |
47-142588-000 | Elevator Motor Power Cable Assembly | |
47-862735-000 | Elevator Motor Power Cable Assembly (for use with Adapter 68-100453-000 N.A.) | |
11-696717-000 | N.A. Connector Cap | |
11-671011-000 | Contactor (24V) | |
57-214276-007 | Spring Latch Assembly | |
11-671514-000 | Contactor (12V) | |
11-199000-001 | Lockwasher | |
11-671001-000 | N.A. Relay (1.6 - 2.5 Amp) | |
47-142591-000 | N.A. Table Motor Power Cable Assembly | |
47-142592-000 | Sweep Motor Power Cable Assembly | |
47-142606-000 | Elevator Motor Power Cable Assembly | |
11-696622-000 | N.A. Relay (24V) | |
47-172916-000 | N.A. AC Input Cable Assembly | |
11-703531-000 | N.A. Connector | |
11-612578-000 | N.A. Terminal | |
47-142556-000 | N.A. Cover | |
11-012274-001 | Pan Head C.R. Machine Screw (#6-32 x 1/2”) | |
11-176005-001 | Keps Nut | |
11-615510-000 | N.A. Toggle Switch | |
11-012251-001 | N.A. Pan Head C.R. Screw with Lockwasher (#4-40 x 3-16”) | |
47-142600-000 | N.A. Mounting Bracket | |
47-862821-400 | N.A. GS Consolidated Electronics Low Voltage Control Box (includes Isolation Mount and Mounting Hardware) | |
47-862926-400 | N.A. GS-X Consolidated Electronics Low Voltage Control Box (includes Isolation Mount and Mounting Hardware) | |
47-142571-000 | Masking Unit and Micro Processor Interface Cable Assembly | |
11-680301-000 | N.A. Terminal | |
57-860031-000 | R.O. Terminal - Female (Pkg. of 20) | |
11-680207-000 | Connector | |
47-142568-000 | Low Voltage Interface Cable Assembly | |
11-680983-000 | Terminal | |
11-680995-000 | N.A. Connector | |
11-680954-000 | Connector | |
47-142602-000 | N.A. R.H. Lane Various Functions Cable Assembly | |
11-680220-000 | N.A. Connector | |
11-680208-000 | N.A. Connector | |
11-680221-000 | Connector | |
11-692325-000 | Connector | |
11-692090-000 | N.A. Terminal | |
57-860043-000 | R.O. Terminal (Pkg. of 10) | |
11-615511-000 | Toggle Switch | |
11-615515-000 | Toggle Switch | |
11-615013-000 | Push Button | |
47-142594-000 | Switch Guard | |
47-142563-000 | R.O. Comline Switch GS Low Voltage Box Cable Assembly | |
47-142619-000 | Optical Trigger Foul Control Cable Assembly | |
11-615021-000 | Switch w/LED (Does not include cable) | |
11-680981-000 | Terminal | |
11-615022-000 | Lens (Red) | |
11-680802-000 | LED | |
47-142572-000 | N.A. R.H. and L.H. Lane Various Functions Cable Assembly | |
47-142567-000 | N.A. High Voltage Output Cable Assembly | |
47-862823-000 | I/O PCB | |
47-862822-400 | N.A. CPU PCB (pre-GS-X) | |
47-862925-400 | N.A. CPU PCB (GS-X) | |
11-012274-001 | Pan Head C.R. Machine Screw (#6-32 x 1/2”) | |
11-651024-000 | N.A. Grommet (2-1/2” Dia.) | |
47-142595-000 | Cover | |
57-214276-007 | Fastener | |
11-012251-001 | N.A. Pan Head C.R. Machine Screw (#4-40 x 3/16”) | |
11-199000-001 | Lockwasher (#4) | |
47-862503-000 | Keyswitch Assembly | |
68-100663-000 | N.A. Screen Retainer | |
11-012003-001 | Pan Head C.R. Machine Screw w/Lockwasher (#4-40 x 5/16”) | |
11-698421-000 | N.A. Heat Sink | |
11-696878-000 | N.A. Adjustable Voltage Regulator (+12V) | |
11-696876-000 | N.A. Voltage Regulator (+12V) | |
47-142566-001 | N.A. Cable Assembly - 9” (Blue) | |
47-142565-001 | N.A. Cable Asssembly - 13” (Orange) | |
11-698441-000 | N.A. Mounting Kit | |
11-052057-001 | Pan Head C.R. Screw with Lockwasher | |
57-861589-000 | N.A. Comline Terminator | |
47-080201-001 | N.A. Front Frame Support | |
47-142613-000 | N.A. solation Mount Assembly (shipped as R.H. reconfigure for L.H. Isolation Mount Assembly use) | |
11-176001-001 | Keps Nut (5/16-18) | |
11-191012-001 | Flat Washer (5/16) | |
11-603025-000 | N.A. Vibration Mount | |
11-001176-001 | N.A. Hex Machine Screw (1/4-20 x 3/8”) | |
11-050901-001 | N.A. Locknut (M8) | |
11-051010-001 | Hex Head Cap Screw (M8 x 20) | |
11-014144-001 | Flat Head Screw (1/4-20 x 1/2”) | |
47-142600-000 | N.A. Mounting Bracket | |
47-142620-000 | R.H. Side Function Solenoid and Switches Cable Assembly | |
47-244922-004 | Table Switch and Harness Cable Assembly | |
47-243071-004 | N.A. Rear Box Control with Cable Assembly | |
47-243071-000 | R.O. Rear Box Control with Cable Assembly | |
47-142615-000 | Table Motor Cable Assembly | |
47-142617-000 | Sweep Motor Cable Assembly | |
47-142621-000 | L.H. Function Solenoid and Switches Cable Assembly | |
53-200871-000 | Masking Unit Control Cable Assembly | |
47-142616-000 | Elevator Motor Cable Assembly | |
68-100159-000 | N.A. Manager’s Lane Control Cable Assembly | |
47-862825-000 | Ball Lift Adapter Cable | |
47-142614-000 | Ball Accelerator Cable Assembly | |
47-142619-000 | Foul and Optical Trigger Cable | |
68-100050-000 | N.A. Player Control Station Cable Assembly | |
53-860691-000 | Lane (to Ball Lift) Cable Assembly | |
57-861526-000 | Frameworx Primary to Consolidated Box LAN Cable | |
57-214920-000 | N.A. Reflector and Bracket Assembly | |
57-214921-000 | N.A. Ball Detector Assembly | |
99-080220-004 | N.A. Ball Detector Assembly | |
99-086293-000 | N.A. Pkg. Ball Detect Complete w/Hardware | |
99-087140-000 | R.O. Pkg. Ball Detect Complete w/Hardware | |
57-214901-000 | N.A. Bracket | |
17-600771-000 | N.A. Housing Assembly | |
11-190004-001 | Flat Washer (#8) | |
11-195008-001 | Lockwasher (#8) | |
11-012308-001 | Pan Hd. Machine Screw (#8-32 x 3/8”) | |
17-600770-000 | N.A. Housing Only | |
17-600773-000 | N.A. Plate | |
53-600101-000 | Reflector | |
11-013007-001 | N.A. Sltd. Pan Hd. Machine Screw (#4-40 x 9/16”) | |
11-195004-001 | N.A. Lockwasher (#4) | |
11-125000-001 | Hex Nut (#4) | |
11-082092-001 | N.A. Self Tapping Screw (#10 x 1/2”) | |
11-195010-001 | Lockwasher (#10) | |
11-190006-001 | Flat Washer (#10) | |
57-214900-000 | Bracket | |
11-013060-001 | Pan Hd. Machine Screw (#8-32 x 1/2”) | |
11-086307-001 | Sltd. Flat Hd. Machine Screw (#4 x 1”) | |
57-214904-000 | N.A. Cable Assembly | |
99-080194-004 | N.A. Photo Cell & Cable Assembly | |
99-086292-000 | N.A. Pkg. Ball Detect Sigle Unit w/Hardware | |
99-087140-000 | R.O. Pkg. Ball Detect Sigle Unit w/Hardware | |
99-080186-003 | Housing | |
99-080180-004 | Spring | |
11-680101-000 | Connector | |
11-680302-000 | N.A. Terminal | |
57-860032-000 | R.O. Terminal - Male (Pkg. of 10) | |
47-223102-004 | N.A. Reflector | |
47-225846-004 | R.O. Reflector | |
11-054780-000 | N.A. Slotted Pan Hd. Self Tapping Screw (4.2mm x 16mm) | |
99-200212-004 | N.A. Reflector Bracket | |
99-200222-004 | Reflector and Bracket Assembly | |
47-225846-004 | Reflector Tape | |
57-860507-000 | Reflector and Hardware Pkg. (includes Index Nos 1, 3, 4, and 8) | |
47-862863-000 | I/O PCB Assembly | |
47-862851-400 | N.A. CPU PCB Assembly | |
47-142736-401 | R.O. CPU PCB Nexgen Controller Assembly | |
47-862852-000 | N.A. High Voltage PCB Assembly | |
47-862859-000 | R.O. High Voltage PCB Nexgen Controller | |
47-142692-000 | Transformer - Qty 1 (For dual transformer Nexgen Boxes - sold individually) | |
47-862857-000 | Keyboard Membrane | |
11-615511-000 | ON/OFF Toggle Switch w/Nut | |
47-142594-000 | Switch Guard | |
47-862862-400 | N.A. Nexgen Controller Assembly | |
47-862866-400 | N.A. Nexgen Controller Assembly | |
47-862866-402 | N.A. Nexgen Controller Assembly | |
47-862866-403 | N.A. Nexgen Controller Assembly | |
47-862866-404 | R.O. Nexgen Controller Assembly | |
47-142662-000 | N.A. Run/Stop Cable Assembly | |
47-142660-000 | Power Switch/Cable Assembly (single transformer nexgen box) | |
47-142705-000 | N.A. Power Switch/Cable Assembly (dual transformer nexgen box) | |
47-142663-000 | AC Power In Cable Assembly | |
47-142653-000 | N.A. Ball Accelerator Motor Power Cable Assembly | |
47-142656-000 | L.H. Distributor Motor Power Cable Assembly | |
47-142656-010 | N.A. R.H. Distributor Motor Power Cable Assembly | |
47-142657-000 | L.H. Setting Table Power Cable Assembly | |
47-142657-010 | R.H. Setting Table Power Cable Assembly | |
47-142700-000 | CPU to High Voltage Logic Cable Assembly (14”) | |
47-142664-000 | L.H. Pin Light Power Cable Assembly | |
47-142664-010 | R.H. Pin Light Power Cable Assembly | |
47-142661-000 | L.H. Sweep Motor Power Cable Assembly | |
47-142661-010 | R.H. Sweep Motor Power Cable Assembly | |
47-142654-000 | N.A. CPU to I/O PCB Cable Assembly | |
47-862854-000 | Fuse 3.15A, 250V (Pkg. of 5) | |
47-862855-000 | Fuse 8A, 250V - Fast Blow (Pkg. of 5) | |
47-862856-000 | Fuse .5A, 250V - Slow Blow (Pkg. of 5) | |
47-142666-000 | N.A. LCD Display - only | |
47-142659-000 | Transformer (For single transformer Nexgen Boxes) | |
11-688581-000 | N.A. Power Filter | |
47-142655-000 | R.O. Power Filter w/Harness Assembly | |
47-142665-000 | N.A. LCD Display Cable | |
47-142693-000 | Transformers to CPU Cable (For dual transformer Nexgen Boxes) | |
11-615048-000 | Switch Power Lockout | |
47-862100-000 | Pkg. LCD Module w/Harness (includes index Nos. 26 & 29) | |
47-862007-000 | Pkg. Nexgen Vibration Mount Kit (includes 4 mounts and hardware) | |
11-012096-001 | Screw (#10-32 x 1/2”) | |
47-142674-000 | N.A. R.H.Function Solenoid and Switches Cable Assembly | |
47-142730-000 | R.O. R.H. Functions Cable Assembly | |
47-862848-000 | N.A. Ball Detect and Foul Cable Assembly | |
47-245422-003 | Rear Box Control Cable Assembly | |
47-142673-000 | N.A. L.H. Functions Solenoids and Switches Cable Assembly | |
47-142790-000 | R.O. L.H. Functions Cable Assembly | |
47-245420-004 | Setting Table Cable Assembly | |
47-142616-000 | Distributor Motor Cable Assembly | |
47-142617-000 | Sweep Motor Cable Assembly | |
47-142615-000 | Setting Table Motor Cable Assembly | |
47-225416-004 | Pin Light Cable Assembly | |
47-862735-000 | Power Adapter Cord (600V) | |
47-245423-004 | Ball Accelerator Motor Cable Assembly | |
47-862825-000 | Ball Lift Cable | |
53-860691-000 | Lane to Ball Lift Cable | |
57-900112-000 | Forked Extractor | |
11-692091-000 | N.A. Terminal | |
57-900103-000 | Crimper | |
57-214920-000 | N.A. Reflector and Bracket Assembly | |
57-214921-000 | N.A. Ball Detector Assembly | |
99-080220-004 | N.A. Ball Detector Assembly | |
99-086293-000 | N.A. Pkg. Ball Detect Complete w/Bracket & Hardware | |
99-087141-000 | R.O. Pkg. Ball Detect Complete w/Bracket & Hardware | |
57-214901-000 | N.A. Bracket | |
17-600771-000 | N.A. Reflector Housing Assembly | |
11-190004-001 | Flat Washer (#8) | |
11-195008-001 | Lockwasher (#8) | |
11-012308-001 | Pan Hd. Machine Screw (#8-32 x 3/8”) | |
17-600770-000 | N.A. Housing Only | |
17-600773-000 | N.A. Plate | |
53-600101-000 | Reflector | |
11-013007-001 | N.A. Sltd. Pan Hd. Machine Screw (#4-40 x 9/16”) | |
11-195004-001 | N.A. Lockwasher (#4) | |
11-125000-001 | Hex Nut (#4-40) | |
11-082092-001 | N.A. Self Tapping Screw (#10 x 1/2”) | |
11-195010-001 | Lockwasher (#10) | |
11-190006-001 | Flat Washer (#10) | |
57-214900-000 | Bracket | |
11-013060-001 | Pan Hd. Machine Screw (#8-32 x 1/2”) | |
11-086307-001 | Sltd. Flat Hd. Machine Screw (#4 x 1”) | |
57-214904-000 | N.A. Cable Assembly | |
99-080194-004 | N.A. Photo Cell & Cable Assembly | |
99-086292-000 | N.A. Pkg. Ball Detect Single Unit w/Hardware | |
99-087140-000 | R.O. Pkg. Ball Detect Single Unit w/Hardware | |
99-080186-003 | Housing | |
99-080180-004 | Spring | |
11-680101-000 | Connector | |
11-680302-000 | N.A. Terminal | |
57-860032-000 | R.O. Terminal - Male (Pkg. of 10) | |
47-223102-004 | N.A. Reflector | |
47-225846-004 | R.O. Reflector | |
11-054780-000 | N.A. Slotted Pan Hd. Self Tapping Screw (4.2mm x 16mm) | |
99-200212-004 | N.A. Reflector Bracket | |
99-200222-004 | Reflector and Bracket Assembly | |
47-225846-004 | Reflector Tape | |
57-860507-000 | Reflector and Hardware Pkg. (includes Index Nos. 1, 3, 4 & 8) | |
47-081504-001 | Guide Tower Guard | |
47-081795-002 | N.A. Gear Train Guard (right-hand) | |
47-082103-001 | Gear Train Guard (left-hand) | |
47-072086-003 | Motor Pulley Guard | |
47-084028-002 | N.A. Catwalk Guard | |
47-084024-002 | N.A. Ball Return Guard | |
47-084048-001 | Hand Rail | |
47-084032-002 | N.A. R.H. Front Cable Channel | |
47-084030-002 | N.A. L.H. Front Cable Channel | |
47-084038-001 | N.A. Kickback Cable Channel | |
47-084051-000 | N.A. Upper Elevator Guard | |
47-084043-001 | N.A. L.H. Lower Elevator Guard | |
47-084044-001 | N.A. R.H. Lower Elevator Guard | |
47-013990-002 | Elevator Rear Guard Assembly (GS-92 or GS-96) | |
47-011775-003 | Elevator Guard Complete (short) | |
47-023923-003 | N.A. Lexan Division Barrier (between machines) | |
47-084047-001 | Guide Tower Guard Frame | |
47-084041-001 | N.A. Guide Tower Guard | |
47-084025-002 | N.A. Left Side Guard Frame | |
47-084026-002 | Stroke Limiter Guard | |
47-084039-001 | Left Side Guard Complete | |
47-273879-009 | N.A. Guard Hardware Pkg. | |
47-084050-001 | N.A. Pulley Guard Frame | |
47-084049-001 | N.A. Pulley Guard Frame | |
47-084046-001 | N.A. Pulley Guard (ball return) | |
47-084045-001 | Pulley Guard (division) | |
47-084033-002 | Side Guard Complete (end machine) | |
47-084935-003 | Accelerator Cover | |
11-051744-001 | Locknut (M8) | |
11-051038-001 | Metric Hex Head Cap Screw (18 mm x 16 mm) | |
47-084938-002 | N.A. Top Cover | |
47-084937-002 | N.A. Side Cover | |
47-084936-003 | N.A. Walk Cover | |
47-085973-000 | R.O. Walkway Bridge | |
47-084930-003 | N.A. Hand Rail | |
47-084937-002 | N.A. Side Cover | |
47-085312-003 | Angle Bracket | |
47-085313-003 | Lower Bracket | |
47-085182-003 | Guard, left-end (from the foul line) | |
47-085189-003 | Guard, Double (common kickback) | |
47-085191-003 | Guard, right-end (from the foul line) | |
47-084958-004 | Cable Channel and Cover Assembly | |
47-084950-004 | Warning Label (Ball Detect) | |
11-055101-001 | Hex Head Cap Screw (9 mm x 20 mm) | |
11-051013-001 | Hex Head Cap Screw (10 mm x 90 mm) | |
11-051745-001 | Locknut (10 mm) | |
47-085571-009 | R.H. Rear Guard - Complete | |
47-085570-009 | Middle Guard - Complete | |
47-085574-009 | R.H. Front Guard - Complete | |
47-085550-004 | N.A. 1/4 Turn Fastener Slotted Pan Head | |
11-056201-000 | R.O. 1/4 Turn Fastener Pan Head w/Internal Hex Drive | |
47-085499-004 | Retaining Ring | |
47-085573-009 | L.H. Front Guard - Complete | |
47-085572-009 | L.H. Rear Guard - Complete | |
47-085490-004 | Spacer | |
47-085569-009 | Guard Rail | |
47-085492-004 | Guard Support | |
47-085498-004 | 1/4 Turn Receptacle | |
11-052689-001 | N.A. Roll Pin (8 mm x 30 mm) | |
11-051744-001 | Lock Nut (8 mm) | |
47-013952-004 | Quick Lock Assembly (includes Fastener, Retainer and Bracket) | |
11-053308-001 | N.A. Wood Screw (6mm x 30 mm) | |
11-051550-001 | N.A. Socket Head Cap Screw (8 mm x 16 mm) | |
11-051743-001 | Lock Nut (6 mm) | |
11-051514-001 | Socket Head Cap Screw (6 mm x 16 mm) | |
47-085825-003 | Side Rear Guard - (Clear) | |
47-085828-003 | N.A. R.H. Support Pole | |
47-085837-003 | N.A. L.H. Support Pole | |
47-085840-003 | N.A. R.H. Frame Extension | |
47-085839-003 | N.A. L.H. Frame Extension | |
47-085784-009 | R.O. Extension Frame for Lane Pair Pkg. | |
11-051041-001 | Hex Head Cap Screw (8 mm x 35 mm) | |
47-086163-009 | Retainer (Pkg. of 10) | |
47-086165-009 | Quick Lock Internal Hex Drive Pan Head Fastener w/Retainer (replaces Slotted Hex Head Fastener) | |
47-085821-003 | S.O. Division Guard - (Clear) | |
47-085829-004 | N.A. Shim | |
47-085822-003 | S.O. Elevator Guard - (Clear) | |
47-013990-002 | Elevator Guard - (Solid Gray) | |
47-013952-004 | Quick Lock Assembly (includes Fastener, Retainer and Bracket) | |
47-013651-004 | N.A. Mounting Clip | |
11-054451-000 | Self Tapping Screw (6 mm x 10 mm) | |
11-054425-000 | Slotted Set Screw (M8 x 80 mm) | |
47-085826-009 | Handle Pkg. (includes index Nos. 9 & 10) | |
11-051035-001 | Hex Head Cap Screw (6 mm x 16 mm) | |
11-052037-001 | Flat Washer (6.4) | |
11-051011-001 | Hex Head Cap Screw (8 mm x 50 mm) | |
11-051744-001 | Lock Nut (8 mm) | |
47-086163-009 | Retainer (Pkg. of 10) | |
47-086165-009 | Quick Lock Internal Hex Drive Pan Head Fastener w/Retaining Ring | |
47-085820-003 | N.A. Ball Return Guard (Clear) | |
47-085829-004 | N.A. Shim | |
11-051744-001 | Lock Nut (8 mm) | |
11-051011-001 | Hex Head Cap Screw (8 mm x 50 mm) | |
47-013952-004 | Quick Lock Assembly (includes Bracket, Fastener and Retainer) | |
11-054425-000 | Slotted Set Screw (M8 x 80 mm) | |
47-013651-004 | N.A. Mounting Clip | |
11-054451-000 | Self Tapping Screw (6 mm x 10 mm) | |
47-085826-009 | Handle Pkg. (included index Nos. 10 & 11) | |
11-052037-001 | Flat Washer (6.4 x 18) | |
11-051035-001 | Hex Head Cap Screw (6 mm x 16 mm | |
47-086165-009 | Quick Lock Internal Hex Drive Pan Head Fastener w/Retaining Ring | |
47-086163-009 | Retainer (Pkg. of 10) | |
47-085834-003 | N.A. R.H. Support Pole Guard | |
47-085838-003 | N.A. L.H. Support Pole Guard | |
11-051744-001 | Lock Nut (8 mm) | |
11-052019-001 | Flat Washer (8.4) | |
11-053305-001 | N.A. Hex Head Cap Screw (8 mm x 40 mm) | |
47-085835-003 | N.A. Support Block | |
11-051015-001 | Hex Head Lag Screw (8 mm x 25 mm) | |
47-085833-003 | N.A. R.H. Angle Stabilizer Bar (660 mm) | |
47-085831-003 | N.A. L.H. Angle Stabilizer Bar (500 mm) | |
47-085832-003 | N.A. L.H. Straight Stabilizer Bar (610 mm) | |
47-085830-003 | N.A. R.H. Straight Stabilizer Bar (450 mm) | |
11-051743-001 | Lock Nut (6 mm) | |
11-054851-001 | N.A. Wood Screw (4.8 mm x 25 mm) | |
47-085783-004 | N.A. Sweep Guard Plate - Bracket | |
47-085781-003 | S.O. Sweep Guard (Clear) | |
47-085782-003 | N.A. Guard Support | |
11-051035-001 | Hex Head Cap Screw (6 mm x 16 mm) | |
47-085362-002 | N.A. Front Frame Support Assembly | |
47-142720-000 | N.A. Rear Emergency Stop Switch Assembly (216’) | |
47-142871-000 | R.O. Emergency Stop Box Assembly (back of pinsetter) | |
11-021524-015 | N.A. Self Tappinng Screws (#6-32) | |
47-142731-000 | N.A. Elevator Emergency Stop Switch Bracket | |
11-052020-001 | N.A. Flat Washer (5.3) | |
11-051742-001 | N.A. Lock Nut (5 mm) | |
11-051027-001 | N.A. Hex Head Cap Screw (5 mm x 40 mm) | |
47-142719-000 | N.A. Front Emergency Stop Switch Assembly (96”) | |
47-142870-000 | R.O. Emergency Stop Box Assembly (front of pinsetter) | |
11-051015-001 | Hex Head Cap Screw (M8 x 25 mm) | |
11-052019-001 | Flat Washer (8.4 mm) | |
47-086034-000 | N.A. Stabilizer (575 mm) | |
47-086035-000 | N.A. Stabilizer (615 mm) | |
47-085831-003 | N.A. Stabilizer (500 mm) | |
47-085830-003 | N.A. Stabilizer (450 mm) | |
47-085835-003 | N.A. Support Block | |
11-053305-001 | N.A. Hex Head Lag Screw (M8 x 40 mm) | |
47-085989-000 | Support Post (1.97 m) | |
47-085987-000 | Rear Pinsetter Support Post | |
47-085988-000 | Front Pinsetter Support Post | |
11-010818-001 | N.A. Self-Tapping Screw (1/4-14 x 1”) | |
47-085993-000 | Division Guard Offset Bracket | |
47-085994-000 | N.A. Walkway Guard Bracket | |
11-051014-001 | Hex Head Cap Screw (M6 x 45 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
11-051064-001 | Hex Head Cap Screw (M8 x 65 mm) | |
11-051744-001 | Locknut (8 mm) | |
11-051079-001 | N.A. Hex Head Cap Screw (M8 x 50 mm) | |
11-081028-001 | Self-Tapping Screw (5/16 x 1/2”) | |
47-085990-000 | S.O. Division Guard | |
47-085998-000 | N.A. L.H. End Guard Support | |
47-085997-000 | N.A. R.H. End Guard Support | |
47-086066-009 | Support | |
11-053308-001 | N.A. Hex Head Lag Screw (M6 x 30 mm) | |
11-051743-001 | Locknut (6 mm) | |
47-085979-000 | S.O. End Lane Guard | |
47-013952-004 | Quick Lock Assembly (includes Fastener, Retainer and Bracket) | |
47-086163-009 | Quick Lock Retainer (Pkg. of 10) | |
11-010818-001 | N.A. Self Tapping Screw (1/4-14 x 1”) | |
11-052037-001 | Flat Washer (6.4) | |
47-086165-009 | Quick Lock Internal Hex Drive Pan Head Fastener w/Retainer | |
11-051743-001 | Locknut (6 mm) | |
11-052037-001 | Flat Washer (6.4) | |
11-051036-001 | N.A. Hex Head Cap Screw (M6 x 35 mm) | |
47-085984-000 | Upper Division Guard | |
47-085996-000 | N.A. End Guard Cover - Used On Right Side Only | |
11-010818-001 | N.A. Self Tapping Screw (1/4-14 x 1”) | |
11-051015-001 | Hex Head Cap Screw (M8 x 25 mm) | |
11-052019-001 | Flat Washer (8.4 mm) | |
47-085831-003 | N.A. Stabilizer (500 mm) | |
47-085830-003 | N.A. Stabilizer (450 mm) | |
47-085835-003 | N.A. Support Block | |
11-053305-001 | N.A. Hex Head Lag Screw (M8 x 40 mm) | |
47-085989-000 | Support Post | |
47-085987-000 | Rear Pinsetter Support Post | |
47-085988-000 | Front Pinsetter Support Post | |
11-010818-001 | N.A. Self Tapping Screw (1/4-14 x 1”) | |
47-085993-000 | N.A. Division Guard Offset Bracket | |
47-085994-000 | N.A. Walkway Guard Bracket | |
11-051014-001 | Hex Head Cap Screw (6 mm x 45 mm) | |
11-051769-001 | Lockwasher (6 mm) | |
11-051079-001 | N.A. Hex Head Cap Screw (M8 x 50 mm) | |
11-051744-001 | Locknut (8 mm) | |
11-051064-001 | Hex Head Cap Screw (M8 x 65 mm) | |
11-053310-001 | N.A. Hex Head Lag Screw (M8 x 30 mm) | |
11-081028-001 | N.A. Self TappingTapping Screw (5/16 x 1/2”) | |
47-085990-000 | S.O. Division Guard - UK Advanced Guards only | |
47-086043-000 | S.O. Division Guard - Advanced Guards only | |
11-051743-001 | Locknut (6 mm) | |
47-085991-000 | N.A. Division Guard Support | |
11-051018-001 | Hex Head Lag Screw (6 mm x 20 mm) | |
11-010818-001 | N.A. Self Tapping Screw (1/4-14 x 1”) | |
47-086039-000 | S.O. Elevator Guard | |
47-013952-004 | N.A. Quick Lock Assembly (inludes Fastener, Retainer and Bracket) | |
47-086163-009 | Quick Lock Retainer Pkg. (Qty. 10) | |
47-086066-009 | Guard Support Tube | |
47-086165-009 | Quick Lock Internal Hex Drive Pan Head Fastener w/Retainer Ring | |
11-051743-001 | Locknut (6 mm) | |
11-052037-001 | Flat Washer (6.4 x 18 mm x 1.6 mm) | |
11-051036-001 | N.A. Hex Head Cap Screw (M6 x 35 mm) | |
47-085984-000 | Upper Division Guard | |
47-086143-009 | S.O. R.H. Rear Hinged Guard | |
47-086139-009 | S.O. L.H. Rear Hinged Ball Return Guard | |
47-086142-009 | S.O. L.H. Rear Hinged Guard | |
47-085826-009 | Handle Pkg. (includes Hardware) | |
11-052037-001 | Flat Washer (6.4) | |
11-051035-001 | Hex Head Cap Screw (M6 x 16 mm) | |
11-052554-000 | N.A. Flat Hd. Machine Screw CR (M5 x 35 mm) | |
11-077000-000 | N.A. Hinge - 3-1/2” x 3-1/2” Mortise Mount | |
11-052020-009 | N.A. Flat Washer (5.3 mm) | |
11-051742-001 | Locknut (5 mm) | |
47-086165-009 | Quick Lock Internal Hex Drive Pan Head Fastener w/Retainer Ring | |
47-086166-009 | Quick Lock Blade Hd. Fastener w/Retainer Ring | |
47-086163-009 | Retainer (Qty. 10) | |
11-040750-001 | N.A. Wood Screw (#9-14 x 3/4”) | |
47-086147-009 | Rear Guard Spring | |
47-016095-000 | N.A. Hinge Stiffiner | |
47-086152-009 | Pkg. Elevator Handle w/Grip & Hardware (Qty. of 2) | |
11-051770-001 | Lockwasher (8 mm) | |
11-051010-001 | N.A. Hex Hd. Cap Screw (M8 x 20 mm) | |
11-051036-001 | Hex Hd. Cap Screw (M6 x 35 mm) | |
47-016014-009 | Quick Lock Assemby (includes Blade Hd. Fastener, Retainer and Bracket) | |
47-013952-004 | Quick Lock Assemby (includes Internal Hex Drive Hd. Fastener, Retainer and Bracket) | |
47-086144-009 | S.O. Rear Division Hinged Guard | |
47-085826-009 | Handle Pkg. (includes Hardware) | |
11-052037-001 | Flat Washer (6.4) | |
11-051035-001 | Hex Head Cap Screw (M6 x 16 mm) | |
11-052554-001 | N.A. Flat Hd. Machine Screw CR (M5 x 35 mm) | |
11-077000-000 | N.A. Mortise Mount Hinge (3-1/2” x 3-1/2”) | |
11-052020-001 | Flat Washer (5.3 mm) | |
11-051742-001 | Locknut (5 mm) | |
47-086163-009 | Quick Lock Retainer (Qty. 10) | |
47-086166-009 | Quick Lock Blade Hd. Fastener w/Retainer Ring | |
47-016014-009 | Quick Lock Assemby (includes Blade Hd. Fastener, Retainer and Bracket | |
47-083659-004 | N.A. Support Strap (592 mm) | |
11-051015-001 | Hex Head Cap Screw (M8 x 25 mm) | |
11-051744-001 | Locknut (8 mm) | |
47-085857-000 | N.A. Support | |
11-051047-001 | N.A. Hex Head Cap Screw (M8 x 100 mm) | |
47-085854-000 | N.A. L.H. Platform Support Bracket | |
11-051079-001 | N.A. Hex Head Cap Screw (M8 x 50 mm) | |
11-052019-001 | Flat Washer (8.4 mm) | |
47-085855-000 | N.A. R.H. Platform Support Bracket | |
11-051025-001 | Hex Head Cap Screw (M8 x 70 mm) | |
11-051018-001 | Hex Head Cap Screw (M6 x 20 mm) | |
11-052037-001 | Flat Washer (6.4) | |
11-051743-001 | Locknut (6 mm) | |
11-053308-001 | N.A. Hex Head Lag Screw (M6 x 30 mm) | |
11-010818-001 | N.A. Self Tapping Screw (1/4-14 x 1”) | |
47-085999-000 | S.O. Sweep Guard | |
47-085992-000 | N.A. Tension Bracket | |
47-086044-000 | S.O. Masking Unit Guard - Advanced w/o Walkway | |
11-051014-001 | Hex Head Cap Screw (M6 x 45 mm) | |
11-052037-001 | Flat Washer (6.4 x 18 mm x 1.6 mm) | |
11-051702-001 | Hex Nut (6 mm) | |
11-051028-001 | Hex Head Cap Screw (M6 x 25 mm) | |
11-051743-001 | Locknut (6 mm) | |
11-010818-001 | N.A. Self Tapping Screw (1/4-14 x 1”) | |
11-051018-001 | Hex Head Cap Screw (6 mm x 20 mm) | |
47-086050-000 | N.A. ABS Guard Bracket - Advanced w/o Walkway | |
47-085992-000 | N.A. Tension Bracket | |
11-053308-001 | N.A. Hex Head Lag Screw (M6 x 30 mm) | |
47-085999-000 | S.O. Sweep Guard | |
11-010818-001 | N.A. Self Tapping Screw (1/4-14 x 1”) | |
47-085973-000 | Walkway Bridge | |
47-085943-001 | Walkway - 3.380 m length (lane pair) | |
47-085943-002 | Walkway - 1.885 m length (single lane) | |
47-085878-000 | Guard Rail - 3.378 m length | |
47-085877-000 | N.A. Guard Rail Mounting Bracket | |
11-051010-001 | Hex Head Cap Screw (M8 x 20 mm) | |
11-051743-001 | Locknut (6 mm) | |
47-085980-000 | S.O. Walkway Guard | |
11-051014-001 | Hex Head Cap Screw (M6 x 45 mm) | |
11-052037-001 | Flat Washer (6.4) | |
11-051036-001 | N.A. Hex Head Cap Screw (M6 x 35 mm) | |
11-053308-000 | N.A. Hex Head Lag Screw (M6 x 30 mm) | |
47-142808-000 | N.A. Photosensor Send Cable Assembly (ver. 1) | |
47-142864-000 | R.O. Photosensor Send Cable Assembly (ver.2) | |
47-142803-000 | N.A. Photosensor Recieve Cable Assembly (ver. 1) | |
47-142863-000 | R.O. Photosensor Recieve Cable Assembly (ver. 2) | |
47-142812-000 | N.A. Rear Door Interlock Cable Assembly (ver. 1) | |
47-142862-000 | R.O. Rear Door Interlock Cable Assembly (ver. 2) | |
47-142816-000 | N.A. Masking Unit Interlock Cable Assembly (ver. 1) | |
47-142861-000 | R.O. Masking Unit Interlock Cable Assembly (ver. 2) | |
47-142761-000 | GS-X Display Box to Nexgen Cable Assembly | |
47-142762-000 | GS-X Rear Display Power, Stop Switches Cable Assembly | |
47-142768-000 | GS-X L.H. Function, Power Retrofit Cable Assembly | |
47-862869-401 | Rear Display - only (Nexgen) | |
11-051027-001 | Hex Hd. Cap Screw (M5 x 40 mm) | |
11-052021-001 | Flat Washer (4.3 mm) | |
11-051743-001 | Locknut (6 mm) | |
47-142779-000 | Consolidated Box to Rear Display Cable Assembly (15’) | |
47-142781-000 | Consolidated Display Interface PCB | |
47-142778-000 | Consolidated Box Display Interface Cable Assembly (18”) | |
11-310500-000 | Drywall Screw (#6 x 1”) | |
47-862881-000 | Consolidated Box to Rear Display w/Bracket | |
47-142811-000 | N.A. Safety Power Controller (ver. 1) | |
47-142834-000 | N.A. Safety Power Controller (ver. 2) | |
47-142868-000 | R.O. Safety Power Controller (ver. 2) | |
47-142116-000 | Safety Power Controller (ver. 3) | |
11-900717-000 | Emergency Stop Decal | |
47-142853-000 | N.A. Emergency Stop Button | |
47-142867-000 | Emergency Stop Button | |
47-142838-000 | Restart Button Assembly | |
11-671005-000 | Contactor - 12A IEC, 24VDC | |
11-696964-000 | Power Supply - 24VDC, 24W | |
11-696966-000 | Photosensor Controller | |
11-696963-000 | N.A. Photosensor Controller | |
47-142810-000 | Emergency Stop Button | |
47-142809-000 | N.A. Restart Button | |
47-142838-000 | R.O. Restart Button Assembly | |
11-615048-000 | Power Switch | |
11-616036-000 | Emergency Stop Button | |
47-142100-000 | Restart Button Assembly | |
11-685056-000 | Fuse - .050 AMP, 250V, 5 mm x 20 mm | |
11-696688-000 | Memory Card (Pilz) | |
11-696687-000 | Terminal Block - Set (Pilz) | |
11-696686-000 | Safety Controller (Pilz) | |
11-616081-000 | Safety Interlock Switch (Ball Return) | |
47-085851-000 | N.A. Shim | |
11-082548-001 | N.A. Pan Hd. C.R. Tapping Screw (#8 x 1-1/4”) | |
11-616082-000 | Actuator Key | |
11-085039-001 | N.A. Washer (5.3 mm) | |
11-051742-001 | Locknut (5 mm) | |
11-616083-000 | Masking Unit Interlock | |
47-085974-009 | N.A. Actuator Key Bracket | |
57-214923-000 | N.A. Oval Sleeve | |
57-214924-003 | N.A. Cable | |
47-086064-000 | N.A. Interlock Bracket - installations w/o walkway | |
11-053789-001 | N.A. Pan Hd. C.R. Mach Screw (M5 x 40 mm) | |
11-170007-001 | Locknut (1/4-20) | |
11-002008-001 | Hex Hd. Cap Screw (1/4-20 x 2”) | |
47-085976-000 | N.A. Retainer - Lower Graphics Panel | |
47-085978-009 | Masking Unit Interlock Hardware Pkg. | |
11-010818-001 | N.A. Self Tapping Screw (1/4-14 X 1”) | |
11-051096-001 | N.A. Hex Hd. Cap Screw (M4 x 30 mm) | |
11-696967-001 | Sensor - Receive (ver. 2) | |
47-086115-000 | Sensor Guard | |
11-581009-000 | Compression Spring | |
11-696967-002 | Sensor - Send (ver. 2) | |
47-086113-000 | N.A. Sensor Alignment Plate | |
47-086114-000 | N.A. Sensor Mounting Bracket (ver. 2) | |
11-696970-000 | Laser-Sensor Alignment Aid | |
11-696962-002 | Sensor - Send (ver. 1) | |
11-696962-001 | Sensor - Receive (ver. 1) | |
47-086097-000 | Sensor Mounting Bracket (ver. 1) | |
47-086164-009 | N.A. O-Ring Pkg. (Qty. 10) | |
11-051741-001 | Locknut (4 mm) | |
11-053793-001 | N.A. Pan H. C.R. Mach Screw (M4 x 30 mm) | |
11-696971-000 | Laser-Sensor Alignment Aid Adapter | |
47-097132-000 | Belt Welding Iron (115V) | |
47-097133-000 | Belt Welding Iron (230V) | |
47-093876-004 | Belt Cutter | |
47-862770-000 | Round Belt Welding Clamp | |
47-097136-000 | OEM Belt Welding tip for 115V & 230V | |
47-277134-009 | Belt Welding Kit - 115VAC (includes index Nos. 1, 2, and 3) | |
47-277135-009 | Belt Welding Kit - 230VAC (includes index Nos. 1, 2, and 3) | |
47-225723-004 | Dual Light Assembly - w/o Bulbs or Power Supply/Control Unit (230/380 Volt) | |
47-225722-004 | Dual Light Assembly - without Bulbs or Power Supply/Control Unit (208 Volt) | |
47-203152-000 | Bulb - White | |
99-220385-004 | Bulb - Black | |
99-220366-004 | Relay (24VAC) | |
47-225254-003 | Power Supply/Control Unit | |
47-225263-004 | Controller Cable | |
47-203147-000 | Starter (230/380 volt pinsetters only) | |
47-225732-004 | Electronic Ballast (208 Volt) | |
47-226294-004 | Electronic Ballast (230 Volt) |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment