-
-
Save danpelota/83b54854aa5af2e351ed71af5c8ebbf5 to your computer and use it in GitHub Desktop.
Raw disk smartctl
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ################################################################################# | |
| smartctl -a -d megaraid,13 /dev/sdb | |
| smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-61-generic] (local build) | |
| Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | |
| Vendor: SEAGATE | |
| Product: ST3300657SS | |
| Revision: 0008 | |
| User Capacity: 300,000,000,000 bytes [300 GB] | |
| Logical block size: 512 bytes | |
| Logical Unit id: 0x5000c5005970aba7 | |
| Serial number: 6SJ5T8RZ0000B3050JHA | |
| Device type: disk | |
| Transport protocol: SAS | |
| Local Time is: Wed Jul 13 08:47:14 2016 EDT | |
| Device supports SMART and is Enabled | |
| Temperature Warning Enabled | |
| SMART Health Status: OK | |
| Current Drive Temperature: 35 C | |
| Drive Trip Temperature: 68 C | |
| Elements in grown defect list: 0 | |
| Vendor (Seagate) cache information | |
| Blocks sent to initiator = 1395146039 | |
| Blocks received from initiator = 557365429 | |
| Blocks read from cache and sent to initiator = 748283952 | |
| Number of read and write commands whose size <= segment size = 1045391 | |
| Number of read and write commands whose size > segment size = 6 | |
| Vendor (Seagate/Hitachi) factory information | |
| number of hours powered up = 29882.33 | |
| number of minutes until next internal SMART test = 55 | |
| Error counter log: | |
| Errors Corrected by Total Correction Gigabytes Total | |
| ECC rereads/ errors algorithm processed uncorrected | |
| fast | delayed rewrites corrected invocations [10^9 bytes] errors | |
| read: 11984734 0 0 11984734 11984734 714.312 0 | |
| write: 0 0 0 0 0 285.467 0 | |
| verify: 26 0 0 26 26 0.003 0 | |
| Non-medium error count: 0 | |
| [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] | |
| No self-tests have been logged | |
| Long (extended) Self Test duration: 3200 seconds [53.3 minutes] | |
| ################################################################################# | |
| smartctl -a -d megaraid,14 /dev/sdb | |
| smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-61-generic] (local build) | |
| Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | |
| Vendor: SEAGATE | |
| Product: ST3300657SS | |
| Revision: 0008 | |
| User Capacity: 300,000,000,000 bytes [300 GB] | |
| Logical block size: 512 bytes | |
| Logical Unit id: 0x5000c5005970c1c3 | |
| Serial number: 6SJ5R1LA0000B3041LY9 | |
| Device type: disk | |
| Transport protocol: SAS | |
| Local Time is: Wed Jul 13 08:47:15 2016 EDT | |
| Device supports SMART and is Enabled | |
| Temperature Warning Enabled | |
| SMART Health Status: OK | |
| Current Drive Temperature: 37 C | |
| Drive Trip Temperature: 68 C | |
| Elements in grown defect list: 0 | |
| Vendor (Seagate) cache information | |
| Blocks sent to initiator = 1234109749 | |
| Blocks received from initiator = 557397363 | |
| Blocks read from cache and sent to initiator = 794376559 | |
| Number of read and write commands whose size <= segment size = 945242 | |
| Number of read and write commands whose size > segment size = 5 | |
| Vendor (Seagate/Hitachi) factory information | |
| number of hours powered up = 29882.40 | |
| number of minutes until next internal SMART test = 55 | |
| Error counter log: | |
| Errors Corrected by Total Correction Gigabytes Total | |
| ECC rereads/ errors algorithm processed uncorrected | |
| fast | delayed rewrites corrected invocations [10^9 bytes] errors | |
| read: 10524443 0 0 10524443 10524443 631.862 0 | |
| write: 0 0 0 0 0 285.474 0 | |
| verify: 39 0 0 39 39 0.002 0 | |
| Non-medium error count: 0 | |
| [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] | |
| No self-tests have been logged | |
| Long (extended) Self Test duration: 3200 seconds [53.3 minutes] | |
| ################################################################################# | |
| smartctl -a -d megaraid,15 /dev/sdb | |
| smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-61-generic] (local build) | |
| Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | |
| Vendor: SEAGATE | |
| Product: ST3300657SS | |
| Revision: 0008 | |
| User Capacity: 300,000,000,000 bytes [300 GB] | |
| Logical block size: 512 bytes | |
| Logical Unit id: 0x5000c5004356b87b | |
| Serial number: 6SJ2NS5D0000N1519894 | |
| Device type: disk | |
| Transport protocol: SAS | |
| Local Time is: Wed Jul 13 08:47:17 2016 EDT | |
| Device supports SMART and is Enabled | |
| Temperature Warning Enabled | |
| SMART Health Status: OK | |
| Current Drive Temperature: 35 C | |
| Drive Trip Temperature: 68 C | |
| Elements in grown defect list: 0 | |
| Vendor (Seagate) cache information | |
| Blocks sent to initiator = 1144557446 | |
| Blocks received from initiator = 556709907 | |
| Blocks read from cache and sent to initiator = 686278192 | |
| Number of read and write commands whose size <= segment size = 931924 | |
| Number of read and write commands whose size > segment size = 8 | |
| Vendor (Seagate/Hitachi) factory information | |
| number of hours powered up = 31308.97 | |
| number of minutes until next internal SMART test = 55 | |
| Error counter log: | |
| Errors Corrected by Total Correction Gigabytes Total | |
| ECC rereads/ errors algorithm processed uncorrected | |
| fast | delayed rewrites corrected invocations [10^9 bytes] errors | |
| read: 5046670 0 0 5046670 5046670 586.011 0 | |
| write: 0 0 0 0 0 285.132 0 | |
| verify: 42 0 0 42 42 0.003 0 | |
| Non-medium error count: 0 | |
| [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] | |
| No self-tests have been logged | |
| Long (extended) Self Test duration: 3200 seconds [53.3 minutes] | |
| ################################################################################# | |
| smartctl -a -d megaraid,16 /dev/sdb | |
| smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-61-generic] (local build) | |
| Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | |
| Vendor: SEAGATE | |
| Product: ST3300657SS | |
| Revision: 0008 | |
| User Capacity: 300,000,000,000 bytes [300 GB] | |
| Logical block size: 512 bytes | |
| Logical Unit id: 0x5000c500596fe49b | |
| Serial number: 6SJ5R23C0000N30441T7 | |
| Device type: disk | |
| Transport protocol: SAS | |
| Local Time is: Wed Jul 13 08:47:18 2016 EDT | |
| Device supports SMART and is Enabled | |
| Temperature Warning Enabled | |
| SMART Health Status: OK | |
| Current Drive Temperature: 34 C | |
| Drive Trip Temperature: 68 C | |
| Elements in grown defect list: 1 | |
| Vendor (Seagate) cache information | |
| Blocks sent to initiator = 1278728717 | |
| Blocks received from initiator = 557346509 | |
| Blocks read from cache and sent to initiator = 827167144 | |
| Number of read and write commands whose size <= segment size = 1002992 | |
| Number of read and write commands whose size > segment size = 6 | |
| Vendor (Seagate/Hitachi) factory information | |
| number of hours powered up = 29882.33 | |
| number of minutes until next internal SMART test = 55 | |
| Error counter log: | |
| Errors Corrected by Total Correction Gigabytes Total | |
| ECC rereads/ errors algorithm processed uncorrected | |
| fast | delayed rewrites corrected invocations [10^9 bytes] errors | |
| read: 14647338 0 0 14647338 14647338 654.707 0 | |
| write: 0 0 0 0 0 285.447 0 | |
| verify: 16 0 0 16 16 0.003 0 | |
| Non-medium error count: 0 | |
| [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] | |
| No self-tests have been logged | |
| Long (extended) Self Test duration: 3200 seconds [53.3 minutes] | |
| ################################################################################# | |
| smartctl -a -d megaraid,17 /dev/sdb | |
| smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-61-generic] (local build) | |
| Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | |
| Vendor: SEAGATE | |
| Product: ST3300657SS | |
| Revision: 0008 | |
| User Capacity: 300,000,000,000 bytes [300 GB] | |
| Logical block size: 512 bytes | |
| Logical Unit id: 0x5000c500434c9433 | |
| Serial number: 6SJ3G62M0000N2086S7U | |
| Device type: disk | |
| Transport protocol: SAS | |
| Local Time is: Wed Jul 13 08:47:19 2016 EDT | |
| Device supports SMART and is Enabled | |
| Temperature Warning Enabled | |
| SMART Health Status: OK | |
| Current Drive Temperature: 38 C | |
| Drive Trip Temperature: 68 C | |
| Elements in grown defect list: 0 | |
| Vendor (Seagate) cache information | |
| Blocks sent to initiator = 1447423148 | |
| Blocks received from initiator = 556635717 | |
| Blocks read from cache and sent to initiator = 755145640 | |
| Number of read and write commands whose size <= segment size = 900149 | |
| Number of read and write commands whose size > segment size = 0 | |
| Vendor (Seagate/Hitachi) factory information | |
| number of hours powered up = 31309.23 | |
| number of minutes until next internal SMART test = 55 | |
| Error counter log: | |
| Errors Corrected by Total Correction Gigabytes Total | |
| ECC rereads/ errors algorithm processed uncorrected | |
| fast | delayed rewrites corrected invocations [10^9 bytes] errors | |
| read: 5958016 0 0 5958016 5958016 741.079 0 | |
| write: 0 0 0 0 0 285.079 0 | |
| verify: 48 0 0 48 48 0.002 0 | |
| Non-medium error count: 0 | |
| [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] | |
| No self-tests have been logged | |
| Long (extended) Self Test duration: 3200 seconds [53.3 minutes] | |
| ################################################################################# | |
| smartctl -a -d megaraid,18 /dev/sdb | |
| smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-61-generic] (local build) | |
| Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | |
| Vendor: SEAGATE | |
| Product: ST3300657SS | |
| Revision: 0008 | |
| User Capacity: 300,000,000,000 bytes [300 GB] | |
| Logical block size: 512 bytes | |
| Logical Unit id: 0x5000c50039efe2c7 | |
| Serial number: 6SJ1EL0A0000N14055UY | |
| Device type: disk | |
| Transport protocol: SAS | |
| Local Time is: Wed Jul 13 08:47:20 2016 EDT | |
| Device supports SMART and is Enabled | |
| Temperature Warning Disabled or Not Supported | |
| SMART Health Status: OK | |
| Current Drive Temperature: 38 C | |
| Drive Trip Temperature: 68 C | |
| Elements in grown defect list: 0 | |
| Vendor (Seagate) cache information | |
| Blocks sent to initiator = 1290631818 | |
| Blocks received from initiator = 556572644 | |
| Blocks read from cache and sent to initiator = 341363009 | |
| Number of read and write commands whose size <= segment size = 1636542 | |
| Number of read and write commands whose size > segment size = 0 | |
| Vendor (Seagate/Hitachi) factory information | |
| number of hours powered up = 32300.25 | |
| number of minutes until next internal SMART test = 28 | |
| Error counter log: | |
| Errors Corrected by Total Correction Gigabytes Total | |
| ECC rereads/ errors algorithm processed uncorrected | |
| fast | delayed rewrites corrected invocations [10^9 bytes] errors | |
| read: 7950078 0 0 7950078 7950078 660.801 0 | |
| write: 0 0 0 0 0 363.247 0 | |
| verify: 12 0 0 12 12 0.002 0 | |
| Non-medium error count: 3253718 | |
| [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] | |
| No self-tests have been logged | |
| Long (extended) Self Test duration: 3200 seconds [53.3 minutes] | |
| ################################################################################# | |
| smartctl -a -d megaraid,19 /dev/sdb | |
| smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-61-generic] (local build) | |
| Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | |
| Vendor: SEAGATE | |
| Product: ST3300657SS | |
| Revision: 0008 | |
| User Capacity: 300,000,000,000 bytes [300 GB] | |
| Logical block size: 512 bytes | |
| Logical Unit id: 0x5000c500434c876f | |
| Serial number: 6SJ3G9Y70000N21014E9 | |
| Device type: disk | |
| Transport protocol: SAS | |
| Local Time is: Wed Jul 13 08:47:21 2016 EDT | |
| Device supports SMART and is Enabled | |
| Temperature Warning Enabled | |
| SMART Health Status: OK | |
| Current Drive Temperature: 36 C | |
| Drive Trip Temperature: 68 C | |
| Elements in grown defect list: 0 | |
| Vendor (Seagate) cache information | |
| Blocks sent to initiator = 1361946685 | |
| Blocks received from initiator = 557158399 | |
| Blocks read from cache and sent to initiator = 748852088 | |
| Number of read and write commands whose size <= segment size = 1028694 | |
| Number of read and write commands whose size > segment size = 10 | |
| Vendor (Seagate/Hitachi) factory information | |
| number of hours powered up = 31309.45 | |
| number of minutes until next internal SMART test = 55 | |
| Error counter log: | |
| Errors Corrected by Total Correction Gigabytes Total | |
| ECC rereads/ errors algorithm processed uncorrected | |
| fast | delayed rewrites corrected invocations [10^9 bytes] errors | |
| read: 14911691 0 0 14911691 14911691 697.314 0 | |
| write: 0 0 0 0 0 285.368 0 | |
| verify: 63 0 0 63 63 0.003 0 | |
| Non-medium error count: 0 | |
| [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] | |
| No self-tests have been logged | |
| Long (extended) Self Test duration: 3200 seconds [53.3 minutes] | |
| ################################################################################# | |
| smartctl -a -d megaraid,20 /dev/sdb | |
| smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-61-generic] (local build) | |
| Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | |
| Vendor: SEAGATE | |
| Product: ST3300657SS | |
| Revision: 0008 | |
| User Capacity: 300,000,000,000 bytes [300 GB] | |
| Logical block size: 512 bytes | |
| Logical Unit id: 0x5000c50059704bc7 | |
| Serial number: 6SJ5R2GY0000B3050JQF | |
| Device type: disk | |
| Transport protocol: SAS | |
| Local Time is: Wed Jul 13 08:47:23 2016 EDT | |
| Device supports SMART and is Enabled | |
| Temperature Warning Enabled | |
| SMART Health Status: OK | |
| Current Drive Temperature: 37 C | |
| Drive Trip Temperature: 68 C | |
| Elements in grown defect list: 0 | |
| Vendor (Seagate) cache information | |
| Blocks sent to initiator = 1244315312 | |
| Blocks received from initiator = 557181181 | |
| Blocks read from cache and sent to initiator = 808367634 | |
| Number of read and write commands whose size <= segment size = 955263 | |
| Number of read and write commands whose size > segment size = 9 | |
| Vendor (Seagate/Hitachi) factory information | |
| number of hours powered up = 29882.62 | |
| number of minutes until next internal SMART test = 54 | |
| Error counter log: | |
| Errors Corrected by Total Correction Gigabytes Total | |
| ECC rereads/ errors algorithm processed uncorrected | |
| fast | delayed rewrites corrected invocations [10^9 bytes] errors | |
| read: 17680101 0 0 17680101 17680101 637.087 0 | |
| write: 0 0 0 0 0 285.365 0 | |
| verify: 74 0 0 74 74 0.002 0 | |
| Non-medium error count: 0 | |
| [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] | |
| No self-tests have been logged | |
| Long (extended) Self Test duration: 3200 seconds [53.3 minutes] | |
| ################################################################################# | |
| smartctl -a -d megaraid,23 /dev/sdb | |
| smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-61-generic] (local build) | |
| Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | |
| Vendor: SEAGATE | |
| Product: ST3300657SS | |
| Revision: 0008 | |
| User Capacity: 300,000,000,000 bytes [300 GB] | |
| Logical block size: 512 bytes | |
| Logical Unit id: 0x5000c50023bcf533 | |
| Serial number: 3SJ1PJ0F00009052N1DS | |
| Device type: disk | |
| Transport protocol: SAS | |
| Local Time is: Wed Jul 13 08:47:24 2016 EDT | |
| Device supports SMART and is Enabled | |
| Temperature Warning Enabled | |
| SMART Health Status: OK | |
| Current Drive Temperature: 36 C | |
| Drive Trip Temperature: 68 C | |
| Elements in grown defect list: 0 | |
| Vendor (Seagate) cache information | |
| Blocks sent to initiator = 1458527516 | |
| Blocks received from initiator = 1155689780 | |
| Blocks read from cache and sent to initiator = 799366220 | |
| Number of read and write commands whose size <= segment size = 1042474 | |
| Number of read and write commands whose size > segment size = 8 | |
| Vendor (Seagate/Hitachi) factory information | |
| number of hours powered up = 44439.45 | |
| number of minutes until next internal SMART test = 55 | |
| Error counter log: | |
| Errors Corrected by Total Correction Gigabytes Total | |
| ECC rereads/ errors algorithm processed uncorrected | |
| fast | delayed rewrites corrected invocations [10^9 bytes] errors | |
| read: 10756961 1 0 10756962 10756962 746.764 0 | |
| write: 0 0 0 0 0 591.810 0 | |
| verify: 21 0 0 21 21 0.002 0 | |
| Non-medium error count: 16 | |
| [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] | |
| SMART Self-test log | |
| Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] | |
| Description number (hours) | |
| # 1 Background short Completed - 36085 - [- - -] | |
| Long (extended) Self Test duration: 3200 seconds [53.3 minutes] | |
| ################################################################################# | |
| smartctl -a -d megaraid,24 /dev/sdb | |
| smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-61-generic] (local build) | |
| Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | |
| Vendor: SEAGATE | |
| Product: ST3300657SS | |
| Revision: 0006 | |
| User Capacity: 300,000,000,000 bytes [300 GB] | |
| Logical block size: 512 bytes | |
| Logical Unit id: 0x5000c50028a4428b | |
| Serial number: 3SJ2PTEY00009116ZV1J | |
| Device type: disk | |
| Transport protocol: SAS | |
| Local Time is: Wed Jul 13 08:47:25 2016 EDT | |
| Device supports SMART and is Enabled | |
| Temperature Warning Enabled | |
| SMART Health Status: OK | |
| Current Drive Temperature: 33 C | |
| Drive Trip Temperature: 68 C | |
| Elements in grown defect list: 0 | |
| Vendor (Seagate) cache information | |
| Blocks sent to initiator = 1157352681 | |
| Blocks received from initiator = 1154266135 | |
| Blocks read from cache and sent to initiator = 707509129 | |
| Number of read and write commands whose size <= segment size = 1026547 | |
| Number of read and write commands whose size > segment size = 8 | |
| Vendor (Seagate/Hitachi) factory information | |
| number of hours powered up = 36451.17 | |
| number of minutes until next internal SMART test = 54 | |
| Error counter log: | |
| Errors Corrected by Total Correction Gigabytes Total | |
| ECC rereads/ errors algorithm processed uncorrected | |
| fast | delayed rewrites corrected invocations [10^9 bytes] errors | |
| read: 5804476 0 0 5804476 5804476 592.562 0 | |
| write: 0 0 0 0 0 591.083 0 | |
| verify: 157 0 0 157 157 0.003 0 | |
| Non-medium error count: 33 | |
| [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] | |
| SMART Self-test log | |
| Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] | |
| Description number (hours) | |
| # 1 Background short Completed - 28092 - [- - -] | |
| Long (extended) Self Test duration: 3200 seconds [53.3 minutes] | |
| ################################################################################# | |
| smartctl -a -d megaraid,25 /dev/sdb | |
| smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-61-generic] (local build) | |
| Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | |
| Vendor: SEAGATE | |
| Product: ST3300657SS | |
| Revision: 000B | |
| User Capacity: 300,000,000,000 bytes [300 GB] | |
| Logical block size: 512 bytes | |
| Logical Unit id: 0x5000c5008868493f | |
| Serial number: 6SJ8ZCMZ0000N534UEEQ | |
| Device type: disk | |
| Transport protocol: SAS | |
| Local Time is: Wed Jul 13 08:47:26 2016 EDT | |
| Device supports SMART and is Enabled | |
| Temperature Warning Enabled | |
| SMART Health Status: OK | |
| Current Drive Temperature: 33 C | |
| Drive Trip Temperature: 68 C | |
| Elements in grown defect list: 0 | |
| Vendor (Seagate) cache information | |
| Blocks sent to initiator = 1331397577 | |
| Blocks received from initiator = 557374857 | |
| Blocks read from cache and sent to initiator = 733474832 | |
| Number of read and write commands whose size <= segment size = 988108 | |
| Number of read and write commands whose size > segment size = 5 | |
| Vendor (Seagate/Hitachi) factory information | |
| number of hours powered up = 8147.70 | |
| number of minutes until next internal SMART test = 55 | |
| Error counter log: | |
| Errors Corrected by Total Correction Gigabytes Total | |
| ECC rereads/ errors algorithm processed uncorrected | |
| fast | delayed rewrites corrected invocations [10^9 bytes] errors | |
| read: 5382136 0 0 5382136 5382136 681.673 0 | |
| write: 0 0 0 0 0 285.465 0 | |
| verify: 42 0 0 42 42 0.002 0 | |
| Non-medium error count: 0 | |
| [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] | |
| No self-tests have been logged | |
| Long (extended) Self Test duration: 3200 seconds [53.3 minutes] | |
| ################################################################################# | |
| smartctl -a -d megaraid,26 /dev/sdb | |
| smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-61-generic] (local build) | |
| Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | |
| Vendor: SEAGATE | |
| Product: ST3300657SS | |
| Revision: 000B | |
| User Capacity: 300,000,000,000 bytes [300 GB] | |
| Logical block size: 512 bytes | |
| Logical Unit id: 0x5000c500882cde4b | |
| Serial number: 6SJ8VW260000N5329XXA | |
| Device type: disk | |
| Transport protocol: SAS | |
| Local Time is: Wed Jul 13 08:47:27 2016 EDT | |
| Device supports SMART and is Enabled | |
| Temperature Warning Enabled | |
| SMART Health Status: OK | |
| Current Drive Temperature: 35 C | |
| Drive Trip Temperature: 68 C | |
| Elements in grown defect list: 0 | |
| Vendor (Seagate) cache information | |
| Blocks sent to initiator = 1474591904 | |
| Blocks received from initiator = 556729715 | |
| Blocks read from cache and sent to initiator = 863200280 | |
| Number of read and write commands whose size <= segment size = 1058554 | |
| Number of read and write commands whose size > segment size = 9 | |
| Vendor (Seagate/Hitachi) factory information | |
| number of hours powered up = 8147.92 | |
| number of minutes until next internal SMART test = 55 | |
| Error counter log: | |
| Errors Corrected by Total Correction Gigabytes Total | |
| ECC rereads/ errors algorithm processed uncorrected | |
| fast | delayed rewrites corrected invocations [10^9 bytes] errors | |
| read: 14215390 0 0 14215390 14215390 754.989 0 | |
| write: 0 0 0 0 0 285.142 0 | |
| verify: 117 0 0 117 117 0.002 0 | |
| Non-medium error count: 0 | |
| [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] | |
| No self-tests have been logged | |
| Long (extended) Self Test duration: 3200 seconds [53.3 minutes] |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment