eendeego

#![allow(dead_code)]
#![allow(non_upper_case_globals)]

extern crate egl;
extern crate libc;

use egl::{EGLConfig, EGLDisplay, EGLNativeWindowType, EGLSurface, EGLint};
use gr_context::Context;
use opengles::glesv2 as gl;
use std::ffi::CString;

eendeego

#!/bin/sh

# Original source in https://forums.pimoroni.com/t/hyperpixel-selective-output-eg-on-boot/5193/15
#
# Reboots the RPi enabling/disabling HDMI/Hyperpixel depending if HDMI is used or not
# If the machine starts to reboot on a loop, mount /boot on a different machine, and
# create a file in /boot/no-display-reboot

_HDMI_DEVICE=$(tvservice -l | perl -n -e '/Display Number (\d+), type HDMI 0$/ && print $1')

eendeego

(function () {
  const originalPrimaryColor = document.querySelector('.xl.light').style.color; //'rgb(178, 178, 178)';
  const secondaryColor = [...document.querySelectorAll('path')]
    .map(c => c.computedStyleMap().get('stroke').toString())
    .find(f => f != 'none' && f != originalPrimaryColor); //'rgb(126, 95, 50)';
  const originalFadedColor = document.querySelector('.lc.s').style.color; //'rgb(229, 229, 229)';
  const backgroundColor = document.body.style.backgroundColor; // "rgb(125, 90, 37)"

  const newPrimaryColor = 'rgb(0, 0, 0)';
  const newSecondaryColor = 'rgb(192, 192, 192)';

eendeego

---------------------------------------------
2014-07-27 - Texy / Adafruit - 1.8" SPI TFT display, 160x128 18-bit color - ST7735R driver (LCD/TFT)
# http://www.adafruit.com/products/618
# http://www.adafruit.com/products/358
# http://www.raspberrypi.org/forums/viewtopic.php?f=64&t=40677 - 1.8 TFT LCD add-on shield board
# http://www.raspberrypi.org/forums/viewtopic.php?f=59&t=43286 - 1.8" TFT LCD Shield board v2
# http://www.raspberrypi.org/forums/viewtopic.php?f=93&t=43286&p=396430#p396430 - "switching the backlight on and off works!"
"I removed the connectors of pins 15 and 16 between the TFT board and the shield board, rewired pin 15 to the 3.3V rail, and pin 16 to collector in a standard NPN transistor. Base of this transistor is connected to a free GPIO out and emitter goes to GND."
# http://minhdanh2002.blogspot.pt/2013/11/experimenting-with-st7735-18-128x160.html - LCD board pinout
# http://www.raspberrypi.org/forums/viewtopic.php?t=40677 - Este tem os botões !!

eendeego

We couldn’t find that file to show.

eendeego

function promisify(server) {
  var _eval = server.eval;
  server.eval = function promisifiedEval(cmd, context, filename, callback) {
    _eval(cmd, context, filename, function (err, result) {
      if (err) {
        callback(err);
        return;
      }

      Promise.resolve(result).then(function (result) {

eendeego

## Install kernel modules

mkdir -p ~/work/share/lcd/adafruit-pitft-2.8
cd ~/work/share/lcd/adafruit-pitft-2.8

wget http://adafruit-download.s3.amazonaws.com/libraspberrypi-bin-adafruit.deb
wget http://adafruit-download.s3.amazonaws.com/libraspberrypi-dev-adafruit.deb
wget http://adafruit-download.s3.amazonaws.com/libraspberrypi-doc-adafruit.deb
wget http://adafruit-download.s3.amazonaws.com/libraspberrypi0-adafruit.deb
wget http://adafruit-download.s3.amazonaws.com/raspberrypi-bootloader-adafruit-20140724-1.deb

eendeego

# https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi/software-installation


mkdir -p ~/work/share/adafruit-pitft-2.8
cd ~/work/share/adafruit-pitft-2.8

wget http://adafruit-download.s3.amazonaws.com/libraspberrypi-bin-adafruit.deb
wget http://adafruit-download.s3.amazonaws.com/libraspberrypi-dev-adafruit.deb
wget http://adafruit-download.s3.amazonaws.com/libraspberrypi-doc-adafruit.deb
wget http://adafruit-download.s3.amazonaws.com/libraspberrypi0-adafruit.deb

eendeego

var known = [ 1, 6, 3, 9, 4 ];
var presented = [ 2, 5, 7, 4, 9, 4 ];

function done(missing, extraneous) {
  console.log('Missing:', missing);
  console.log('Extraneous:', extraneous);
}

check(known, presented, done);

eendeego

A Pen by Luis Reis

A Pen by Luis Reis on CodePen.

License.