nealfennimore

# ------------------------------------------------
# Config files are located in /etc/wireguard/wg0
# ------------------------------------------------

# ---------- Server Config ----------
[Interface]
Address = 10.10.0.1/24 # IPV4 CIDR 
Address = fd86:ea04:1111::1/64 # IPV6 CIDR 
PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE; ip6tables -A FORWARD -i wg0 -j ACCEPT; ip6tables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Add forwarding when VPN is started
PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE; ip6tables -D FORWARD -i wg0 -j ACCEPT; ip6tables -t nat -D POSTROUTING -o eth0 -j MASQUERADE # Remove forwarding when VPN is shutdown

staltz

The introduction to Reactive Programming you've been missing

(by @andrestaltz)

---

This tutorial as a series of videos

If you prefer to watch video tutorials with live-coding, then check out this series I recorded with the same contents as in this article: Egghead.io - Introduction to Reactive Programming.

---