bisectable6

query

old=2015.10 say ½

result

Bisecting: 1903 revisions left to test after this (roughly 11 steps)
[09b1578e0cea9fd08285d0251351db50eb81ebd2] REPL6: Refactor specified line editor loading
»»»»» Testing 09b1578e0cea9fd08285d0251351db50eb81ebd2
»»»»» Script output:
0.5
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing fe7b1639c38aec4b988b04444377ceed5a6177f9
»»»»» Script output:
0.5
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 51d69591c0192c95dae5f9d72a36a802dd69726a
»»»»» Script output:
0.5
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 87eb6619b9d5e372abb78bcbb25a4649fec55074
»»»»» Script output:
===SORRY!===
Argument to "say" seems to be malformed
at /tmp/3Ox6mm2Qvr:1
------> say⏏ ½
Bogus postfix
at /tmp/3Ox6mm2Qvr:1
------> say ⏏½
    expecting any of:
        infix
        infix stopper
        postfix
        statement end
        statement modifier
        statement modifier loop
Other potential difficulties:
    Unsupported use of bare "say"; in Perl 6 please use .say if you meant $_, or use an explicit invocant or argument, or use &say to refer to the function as a noun
    at /tmp/3Ox6mm2Qvr:1
    ------> say⏏ ½

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing deeec10a2eb2faf8727a7d0923ab65c8913a833f
»»»»» Script output:
===SORRY!===
Argument to "say" seems to be malformed
at /tmp/3Ox6mm2Qvr:1
------> say⏏ ½
Bogus postfix
at /tmp/3Ox6mm2Qvr:1
------> say ⏏½
    expecting any of:
        infix
        infix stopper
        postfix
        statement end
        statement modifier
        statement modifier loop
Other potential difficulties:
    Unsupported use of bare "say"; in Perl 6 please use .say if you meant $_, or use an explicit invocant or argument, or use &say to refer to the function as a noun
    at /tmp/3Ox6mm2Qvr:1
    ------> say⏏ ½

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing a8812c0f142bba1ffac4b80538b3857acf2bf830
»»»»» Script output:
===SORRY!===
Argument to "say" seems to be malformed
at /tmp/3Ox6mm2Qvr:1
------> say⏏ ½
Bogus postfix
at /tmp/3Ox6mm2Qvr:1
------> say ⏏½
    expecting any of:
        infix
        infix stopper
        postfix
        statement end
        statement modifier
        statement modifier loop
Other potential difficulties:
    Unsupported use of bare "say"; in Perl 6 please use .say if you meant $_, or use an explicit invocant or argument, or use &say to refer to the function as a noun
    at /tmp/3Ox6mm2Qvr:1
    ------> say⏏ ½

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 2e38ba676243f18d9218a4d14addb9d4767de1b0
»»»»» Script output:
0.5
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 99e23c39bd209715863075617135182e04a088cb
»»»»» Script output:
===SORRY!===
Argument to "say" seems to be malformed
at /tmp/3Ox6mm2Qvr:1
------> say⏏ ½
Bogus postfix
at /tmp/3Ox6mm2Qvr:1
------> say ⏏½
    expecting any of:
        infix
        infix stopper
        postfix
        statement end
        statement modifier
        statement modifier loop
Other potential difficulties:
    Unsupported use of bare "say"; in Perl 6 please use .say if you meant $_, or use an explicit invocant or argument, or use &say to refer to the function as a noun
    at /tmp/3Ox6mm2Qvr:1
    ------> say⏏ ½

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing cb1c8d4bbc1f7f1f8d82aad9e89da4ceeee9c617
»»»»» Script output:
===SORRY!===
Argument to "say" seems to be malformed
at /tmp/3Ox6mm2Qvr:1
------> say⏏ ½
Bogus postfix
at /tmp/3Ox6mm2Qvr:1
------> say ⏏½
    expecting any of:
        infix
        infix stopper
        postfix
        statement end
        statement modifier
        statement modifier loop
Other potential difficulties:
    Unsupported use of bare "say"; in Perl 6 please use .say if you meant $_, or use an explicit invocant or argument, or use &say to refer to the function as a noun
    at /tmp/3Ox6mm2Qvr:1
    ------> say⏏ ½

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing c8bc50531bd488de397809d9e3302f3a03d6f196
»»»»» Script output:
===SORRY!===
Argument to "say" seems to be malformed
at /tmp/3Ox6mm2Qvr:1
------> say⏏ ½
Bogus postfix
at /tmp/3Ox6mm2Qvr:1
------> say ⏏½
    expecting any of:
        infix
        infix stopper
        postfix
        statement end
        statement modifier
        statement modifier loop
Other potential difficulties:
    Unsupported use of bare "say"; in Perl 6 please use .say if you meant $_, or use an explicit invocant or argument, or use &say to refer to the function as a noun
    at /tmp/3Ox6mm2Qvr:1
    ------> say⏏ ½

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 4d8a90422dfc88c6baa6a3620dcf6959c4450f6d
»»»»» Script output:
===SORRY!===
Argument to "say" seems to be malformed
at /tmp/3Ox6mm2Qvr:1
------> say⏏ ½
Bogus postfix
at /tmp/3Ox6mm2Qvr:1
------> say ⏏½
    expecting any of:
        infix
        infix stopper
        postfix
        statement end
        statement modifier
        statement modifier loop
Other potential difficulties:
    Unsupported use of bare "say"; in Perl 6 please use .say if you meant $_, or use an explicit invocant or argument, or use &say to refer to the function as a noun
    at /tmp/3Ox6mm2Qvr:1
    ------> say⏏ ½

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 8ef5a59eebe9591325393d987566927b4d24366b
»»»»» Script output:
0.5
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
8ef5a59eebe9591325393d987566927b4d24366b is the first new commit
commit 8ef5a59eebe9591325393d987566927b4d24366b
Author: TimToady <larry@wall.org>
Date:   Tue Nov 24 23:43:01 2015 -0800

    allow unival terms, because why not?

:040000 040000 35eaac758757402cefa7ab12495fc9244294ea9f c116efec63bbbc696f8bbf722c29eefdeba73ce6 M	src