Created
March 18, 2021 16:22
-
-
Save r-rmcgibbo/0c8b47fad997bd921748626bde138dd5 to your computer and use it in GitHub Desktop.
system: aarch64-linux | build_time: 2 seconds | https://github.com/NixOS/nixpkgs/pull/116752
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sourcing python-remove-tests-dir-hook | |
Sourcing python-catch-conflicts-hook.sh | |
Sourcing python-remove-bin-bytecode-hook.sh | |
Sourcing setuptools-build-hook | |
Using setuptoolsBuildPhase | |
Using setuptoolsShellHook | |
Sourcing pip-install-hook | |
Using pipInstallPhase | |
Sourcing python-imports-check-hook.sh | |
Using pythonImportsCheckPhase | |
Sourcing python-namespaces-hook | |
@nix { "action": "setPhase", "phase": "unpackPhase" } | |
unpacking sources | |
unpacking source archive /nix/store/j7xb7kpr9jy0pi95raxhhrapj0j76zpp-s3bro-2.8.tar.gz | |
source root is s3bro-2.8 | |
setting SOURCE_DATE_EPOCH to timestamp 1533391882 of file s3bro-2.8/setup.cfg | |
@nix { "action": "setPhase", "phase": "patchPhase" } | |
patching sources | |
@nix { "action": "setPhase", "phase": "updateAutotoolsGnuConfigScriptsPhase" } | |
updateAutotoolsGnuConfigScriptsPhase | |
@nix { "action": "setPhase", "phase": "configurePhase" } | |
configuring | |
no configure script, doing nothing | |
@nix { "action": "setPhase", "phase": "buildPhase" } | |
building | |
Executing setuptoolsBuildPhase | |
running bdist_wheel | |
running build | |
running build_py | |
creating build | |
creating build/lib | |
creating build/lib/s3bro | |
copying s3bro/ratelimit.py -> build/lib/s3bro | |
copying s3bro/cli.py -> build/lib/s3bro | |
copying s3bro/s3_purge.py -> build/lib/s3bro | |
copying s3bro/__init__.py -> build/lib/s3bro | |
copying s3bro/s3_permission.py -> build/lib/s3bro | |
copying s3bro/s3_restore.py -> build/lib/s3bro | |
copying s3bro/pool_map.py -> build/lib/s3bro | |
copying s3bro/s3_tail.py -> build/lib/s3bro | |
copying s3bro/s3_permission_v2.py -> build/lib/s3bro | |
copying s3bro/s3_encryption.py -> build/lib/s3bro | |
/nix/store/03gmzfzkgcxhlxhm1m4vvlwypzn5cnx0-python3.8-setuptools-50.3.1/lib/python3.8/site-packages/setuptools/lib2to3_ex.py:36: SetuptoolsDeprecationWarning: 2to3 support is deprecated. If the project still requires Python 2 support, please migrate to a single-codebase solution or employ an independent conversion process. | |
warnings.warn( | |
Fixing build/lib/s3bro/ratelimit.py build/lib/s3bro/cli.py build/lib/s3bro/s3_purge.py build/lib/s3bro/__init__.py build/lib/s3bro/s3_permission.py build/lib/s3bro/s3_restore.py build/lib/s3bro/pool_map.py build/lib/s3bro/s3_tail.py build/lib/s3bro/s3_permission_v2.py build/lib/s3bro/s3_encryption.py | |
Skipping optional fixer: buffer | |
Skipping optional fixer: idioms | |
Skipping optional fixer: set_literal | |
Skipping optional fixer: ws_comma | |
Fixing build/lib/s3bro/ratelimit.py build/lib/s3bro/cli.py build/lib/s3bro/s3_purge.py build/lib/s3bro/__init__.py build/lib/s3bro/s3_permission.py build/lib/s3bro/s3_restore.py build/lib/s3bro/pool_map.py build/lib/s3bro/s3_tail.py build/lib/s3bro/s3_permission_v2.py build/lib/s3bro/s3_encryption.py | |
Skipping optional fixer: buffer | |
Skipping optional fixer: idioms | |
Skipping optional fixer: set_literal | |
Skipping optional fixer: ws_comma | |
installing to build/bdist.linux-aarch64/wheel | |
running install | |
running install_lib | |
creating build/bdist.linux-aarch64 | |
creating build/bdist.linux-aarch64/wheel | |
creating build/bdist.linux-aarch64/wheel/s3bro | |
copying build/lib/s3bro/ratelimit.py -> build/bdist.linux-aarch64/wheel/s3bro | |
copying build/lib/s3bro/cli.py -> build/bdist.linux-aarch64/wheel/s3bro | |
copying build/lib/s3bro/s3_purge.py -> build/bdist.linux-aarch64/wheel/s3bro | |
copying build/lib/s3bro/__init__.py -> build/bdist.linux-aarch64/wheel/s3bro | |
copying build/lib/s3bro/s3_permission.py -> build/bdist.linux-aarch64/wheel/s3bro | |
copying build/lib/s3bro/s3_restore.py -> build/bdist.linux-aarch64/wheel/s3bro | |
copying build/lib/s3bro/pool_map.py -> build/bdist.linux-aarch64/wheel/s3bro | |
copying build/lib/s3bro/s3_tail.py -> build/bdist.linux-aarch64/wheel/s3bro | |
copying build/lib/s3bro/s3_permission_v2.py -> build/bdist.linux-aarch64/wheel/s3bro | |
copying build/lib/s3bro/s3_encryption.py -> build/bdist.linux-aarch64/wheel/s3bro | |
running install_egg_info | |
running egg_info | |
writing s3bro.egg-info/PKG-INFO | |
writing dependency_links to s3bro.egg-info/dependency_links.txt | |
writing entry points to s3bro.egg-info/entry_points.txt | |
writing requirements to s3bro.egg-info/requires.txt | |
writing top-level names to s3bro.egg-info/top_level.txt | |
reading manifest file 's3bro.egg-info/SOURCES.txt' | |
writing manifest file 's3bro.egg-info/SOURCES.txt' | |
Copying s3bro.egg-info to build/bdist.linux-aarch64/wheel/s3bro-2.8-py3.8.egg-info | |
running install_scripts | |
creating build/bdist.linux-aarch64/wheel/s3bro-2.8.dist-info/WHEEL | |
creating 'dist/s3bro-2.8-py3-none-any.whl' and adding 'build/bdist.linux-aarch64/wheel' to it | |
adding 's3bro/__init__.py' | |
adding 's3bro/cli.py' | |
adding 's3bro/pool_map.py' | |
adding 's3bro/ratelimit.py' | |
adding 's3bro/s3_encryption.py' | |
adding 's3bro/s3_permission.py' | |
adding 's3bro/s3_permission_v2.py' | |
adding 's3bro/s3_purge.py' | |
adding 's3bro/s3_restore.py' | |
adding 's3bro/s3_tail.py' | |
adding 's3bro-2.8.dist-info/METADATA' | |
adding 's3bro-2.8.dist-info/WHEEL' | |
adding 's3bro-2.8.dist-info/entry_points.txt' | |
adding 's3bro-2.8.dist-info/top_level.txt' | |
adding 's3bro-2.8.dist-info/RECORD' | |
removing build/bdist.linux-aarch64/wheel | |
Finished executing setuptoolsBuildPhase | |
@nix { "action": "setPhase", "phase": "installPhase" } | |
installing | |
Executing pipInstallPhase | |
/build/s3bro-2.8/dist /build/s3bro-2.8 | |
Processing ./s3bro-2.8-py3-none-any.whl | |
Requirement already satisfied: termcolor in /nix/store/1gc7smmik47nbvshgrxrn59r4lackrhk-python3.8-termcolor-1.1.0/lib/python3.8/site-packages (from s3bro==2.8) (1.1.0) | |
Requirement already satisfied: click in /nix/store/v6106iwc1n5a6xjicqs53zy204yfaz70-python3.8-click-7.1.2/lib/python3.8/site-packages (from s3bro==2.8) (7.1.2) | |
Requirement already satisfied: boto3 in /nix/store/h86cxjl0w00knh1xfj71hfixpahjn7ni-python3.8-boto3-1.17.30/lib/python3.8/site-packages (from s3bro==2.8) (1.17.30) | |
Requirement already satisfied: s3transfer<0.4.0,>=0.3.0 in /nix/store/bm2zgs5xjvqrk2k6jv832igvyqp71lg9-python3.8-s3transfer-0.3.4/lib/python3.8/site-packages (from boto3->s3bro==2.8) (0.3.4) | |
Requirement already satisfied: botocore<1.21.0,>=1.20.30 in /nix/store/p5fbxfzf89xmvywlpaqssa43m5j59f6j-python3.8-botocore-1.20.30/lib/python3.8/site-packages (from boto3->s3bro==2.8) (1.20.30) | |
Requirement already satisfied: jmespath<1.0.0,>=0.7.1 in /nix/store/h6mxxnl37zxld21y4pfdw3lyhnbb38w7-python3.8-jmespath-0.10.0/lib/python3.8/site-packages (from boto3->s3bro==2.8) (0.10.0) | |
Requirement already satisfied: urllib3<1.27,>=1.25.4 in /nix/store/p952ss6amdjfm9zy51qx0fh5b0hc89wg-python3.8-urllib3-1.26.3/lib/python3.8/site-packages (from botocore<1.21.0,>=1.20.30->boto3->s3bro==2.8) (1.26.3) | |
Requirement already satisfied: python-dateutil<3.0.0,>=2.1 in /nix/store/i2820g6iww87vyrc88pi8c465a8nwphy-python3.8-python-dateutil-2.8.1/lib/python3.8/site-packages (from botocore<1.21.0,>=1.20.30->boto3->s3bro==2.8) (2.8.1) | |
Requirement already satisfied: six>=1.5 in /nix/store/297qnsllxb0jxny1qk9bk2wvhpivzcx0-python3.8-six-1.15.0/lib/python3.8/site-packages (from python-dateutil<3.0.0,>=2.1->botocore<1.21.0,>=1.20.30->boto3->s3bro==2.8) (1.15.0) | |
Installing collected packages: s3bro | |
Successfully installed s3bro-2.8 | |
/build/s3bro-2.8 | |
Finished executing pipInstallPhase | |
@nix { "action": "setPhase", "phase": "fixupPhase" } | |
post-installation fixup | |
shrinking RPATHs of ELF executables and libraries in /nix/store/9i7ycjrzagf7lwq1qjhld4r2k7jf4a2h-python3.8-s3bro-2.8 | |
strip is /nix/store/f73f3xbwv4zafyms2gi3djfgb9h3791b-binutils-2.35.1/bin/strip | |
stripping (with command strip and flags -S) in /nix/store/9i7ycjrzagf7lwq1qjhld4r2k7jf4a2h-python3.8-s3bro-2.8/lib /nix/store/9i7ycjrzagf7lwq1qjhld4r2k7jf4a2h-python3.8-s3bro-2.8/bin | |
patching script interpreter paths in /nix/store/9i7ycjrzagf7lwq1qjhld4r2k7jf4a2h-python3.8-s3bro-2.8 | |
checking for references to /build/ in /nix/store/9i7ycjrzagf7lwq1qjhld4r2k7jf4a2h-python3.8-s3bro-2.8... | |
Rewriting #!/nix/store/jhac19hl1qq3qgrna4y06v1kyngszlvb-python3-3.8.8/bin/python3.8 to #!/nix/store/jhac19hl1qq3qgrna4y06v1kyngszlvb-python3-3.8.8 | |
wrapping `/nix/store/9i7ycjrzagf7lwq1qjhld4r2k7jf4a2h-python3.8-s3bro-2.8/bin/s3bro'... | |
Executing pythonRemoveTestsDir | |
Finished executing pythonRemoveTestsDir | |
@nix { "action": "setPhase", "phase": "pythonCatchConflictsPhase" } | |
pythonCatchConflictsPhase | |
@nix { "action": "setPhase", "phase": "pythonRemoveBinBytecodePhase" } | |
pythonRemoveBinBytecodePhase | |
@nix { "action": "setPhase", "phase": "pythonImportsCheckPhase" } | |
pythonImportsCheckPhase | |
Executing pythonImportsCheckPhase |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment