bisectable6

query

old=2015.01 dd "".lines

result

Bisecting: 11392 revisions left to test after this (roughly 14 steps)
[ddda7439747ae667b513a5a7dc2b7f16af1a269f] Merge pull request #1468 from Kaiepi/docs
»»»»» Testing ddda7439747ae667b513a5a7dc2b7f16af1a269f
»»»»» Script output:
().Seq

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 56cc3ae1c3da43e67ca7051a094dc6bbabf97bad
»»»»» Script output:
().Seq

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 89dd4d5b77e022a0c8b28e9aa3a4180757d3a362
»»»»» Script output:
().Seq

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing d7c9bfa2a37c152603512d844ecfced888f152ba
»»»»» Script output:
()

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 038907b8297894559a287cf09bb01f1838492e1f
»»»»» Script output:
No such method 'name' for invocant of type 'List'
  in sub dd at src/gen/m-CORE.setting:2479
  in block <unit> at /tmp/xy8rpJYjbc:1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 14f6344aa3cbfd2309019a90a55e8d0270f35e23
»»»»» Script output:
()

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 753dae8b065470c6f56b9a67755e474fbfc755b7
»»»»» Script output:
()

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing b0bff33e27c1c83dfab701d24e245800ca930728
»»»»» Script output:
No such method 'name' for invocant of type 'List'
  in sub dd at src/gen/m-CORE.setting:2491
  in block <unit> at /tmp/xy8rpJYjbc:1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing fd3a7a8d9a2f8a51e35cb1d0ffc65f8eced101bf
»»»»» Script output:
No such method 'name' for invocant of type 'List'
  in sub dd at src/gen/m-CORE.setting:2491
  in block <unit> at /tmp/xy8rpJYjbc:1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing cc3e65405cc5d227dea3085c882491eb6f9cfff3
»»»»» Script output:
No such method 'name' for invocant of type 'List'
  in sub dd at src/gen/m-CORE.setting:2493
  in block <unit> at /tmp/xy8rpJYjbc:1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing a7b45b684c54badc3c015c886c85cbf8675adc64
»»»»» Script output:
Method 'name' not found for invocant of class 'List'
  in sub dd at src/gen/m-CORE.setting:2493
  in block <unit> at /tmp/xy8rpJYjbc:1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 221dfef5765d762dc06eb08ca61185acbba090f0
»»»»» Script output:
Method 'name' not found for invocant of class 'List'
  in sub dd at src/gen/m-CORE.setting:2493
  in block <unit> at /tmp/xy8rpJYjbc:1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing b55263afb0ef502ccdfa63417656793943a552dc
»»»»» Script output:
Method 'name' not found for invocant of class 'List'
  in sub dd at src/gen/m-CORE.setting:2493
  in block <unit> at /tmp/xy8rpJYjbc:1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing d8ec4d1b2fd3ba1741a5129c668d4400a9c96352
»»»»» Script output:
()

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing e1e71d39818ffa75d3257f0d3e41d12d4c7ee415
»»»»» Script output:
()

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
e1e71d39818ffa75d3257f0d3e41d12d4c7ee415 is the first new commit
commit e1e71d39818ffa75d3257f0d3e41d12d4c7ee415
Author: Elizabeth Mattijsen <liz@dijkmat.nl>
Date:   Thu Apr 16 09:35:50 2015 +0200

    Simplify dd(), make it work for expressions
    
    $ 6 'dd my $a = 42, 43'
    $a = 42
    43

 src/core/Any.pm | 24 ++++++++----------------
 1 file changed, 8 insertions(+), 16 deletions(-)