Created
June 20, 2011 19:02
-
-
Save anonymous/1036305 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| smartctl 5.40 2010-03-16 r3077 [i686-pc-linux-gnu] (local build) | |
| Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family | |
| Device Model: ST3200822AS | |
| Serial Number: 3LJ372PF | |
| Firmware Version: 3.01 | |
| User Capacity: 200,049,647,616 bytes | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: 6 | |
| ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 | |
| Local Time is: Mon Jun 20 21:02:46 2011 CEST | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x82) Offline data collection activity | |
| was completed without error. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 89) The previous self-test completed having | |
| the electrical element of the test | |
| failed. | |
| Total time to complete Offline | |
| data collection: ( 430) seconds. | |
| Offline data collection | |
| capabilities: (0x5b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| No General Purpose Logging support. | |
| Short self-test routine | |
| recommended polling time: ( 1) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 111) minutes. | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000f 060 053 006 Pre-fail Always - 242548127 | |
| 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 | |
| 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 615 | |
| 5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 47 | |
| 7 Seek_Error_Rate 0x000f 076 060 030 Pre-fail Always - 30404479145 | |
| 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 9583 | |
| 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 591 | |
| 194 Temperature_Celsius 0x0022 039 058 000 Old_age Always - 39 | |
| 195 Hardware_ECC_Recovered 0x001a 060 052 000 Old_age Always - 242548127 | |
| 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 21 | |
| 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 21 | |
| 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 | |
| 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 | |
| 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 | |
| SMART Error Log Version: 1 | |
| ATA Error Count: 150 (device log contains only the most recent five errors) | |
| CR = Command Register [HEX] | |
| FR = Features Register [HEX] | |
| SC = Sector Count Register [HEX] | |
| SN = Sector Number Register [HEX] | |
| CL = Cylinder Low Register [HEX] | |
| CH = Cylinder High Register [HEX] | |
| DH = Device/Head Register [HEX] | |
| DC = Device Command Register [HEX] | |
| ER = Error register [HEX] | |
| ST = Status register [HEX] | |
| Powered_Up_Time is measured from power on, and printed as | |
| DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
| SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
| Error 150 occurred at disk power-on lifetime: 9583 hours (399 days + 7 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 07 af 04 60 e0 Error: UNC 7 sectors at LBA = 0x006004af = 6292655 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| c8 00 08 a8 04 60 e0 00 00:27:54.655 READ DMA | |
| 27 00 00 00 00 00 e0 00 00:27:50.777 READ NATIVE MAX ADDRESS EXT | |
| ec 00 00 00 00 00 a0 00 00:27:50.777 IDENTIFY DEVICE | |
| ef 03 46 00 00 00 a0 00 00:27:50.774 SET FEATURES [Set transfer mode] | |
| 27 00 00 00 00 00 e0 00 00:27:58.550 READ NATIVE MAX ADDRESS EXT | |
| Error 149 occurred at disk power-on lifetime: 9583 hours (399 days + 7 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 07 af 04 60 e0 Error: UNC 7 sectors at LBA = 0x006004af = 6292655 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| c8 00 08 a8 04 60 e0 00 00:27:54.655 READ DMA | |
| 27 00 00 00 00 00 e0 00 00:27:50.777 READ NATIVE MAX ADDRESS EXT | |
| ec 00 00 00 00 00 a0 00 00:27:50.777 IDENTIFY DEVICE | |
| ef 03 46 00 00 00 a0 00 00:27:50.774 SET FEATURES [Set transfer mode] | |
| 27 00 00 00 00 00 e0 00 00:27:50.773 READ NATIVE MAX ADDRESS EXT | |
| Error 148 occurred at disk power-on lifetime: 9583 hours (399 days + 7 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 07 af 04 60 e0 Error: UNC 7 sectors at LBA = 0x006004af = 6292655 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| c8 00 08 a8 04 60 e0 00 00:27:42.897 READ DMA | |
| 27 00 00 00 00 00 e0 00 00:27:50.777 READ NATIVE MAX ADDRESS EXT | |
| ec 00 00 00 00 00 a0 00 00:27:50.777 IDENTIFY DEVICE | |
| ef 03 46 00 00 00 a0 00 00:27:50.774 SET FEATURES [Set transfer mode] | |
| 27 00 00 00 00 00 e0 00 00:27:50.773 READ NATIVE MAX ADDRESS EXT | |
| Error 147 occurred at disk power-on lifetime: 9583 hours (399 days + 7 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 07 af 04 60 e0 Error: UNC 7 sectors at LBA = 0x006004af = 6292655 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| c8 00 08 a8 04 60 e0 00 00:27:42.897 READ DMA | |
| 27 00 00 00 00 00 e0 00 00:27:42.897 READ NATIVE MAX ADDRESS EXT | |
| ec 00 00 00 00 00 a0 00 00:27:42.897 IDENTIFY DEVICE | |
| ef 03 46 00 00 00 a0 00 00:27:42.893 SET FEATURES [Set transfer mode] | |
| 27 00 00 00 00 00 e0 00 00:27:38.990 READ NATIVE MAX ADDRESS EXT | |
| Error 146 occurred at disk power-on lifetime: 9583 hours (399 days + 7 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 07 af 04 60 e0 Error: UNC 7 sectors at LBA = 0x006004af = 6292655 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| c8 00 08 a8 04 60 e0 00 00:27:42.897 READ DMA | |
| 27 00 00 00 00 00 e0 00 00:27:42.897 READ NATIVE MAX ADDRESS EXT | |
| ec 00 00 00 00 00 a0 00 00:27:42.897 IDENTIFY DEVICE | |
| ef 03 46 00 00 00 a0 00 00:27:42.893 SET FEATURES [Set transfer mode] | |
| 27 00 00 00 00 00 e0 00 00:27:38.990 READ NATIVE MAX ADDRESS EXT | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Completed: electrical failure 90% 9582 386871683 | |
| # 2 Short offline Completed: electrical failure 90% 9582 390723614 | |
| # 3 Short offline Completed: electrical failure 90% 9582 378679903 | |
| # 4 Selective offline Completed: electrical failure 90% 9580 348448423 | |
| # 5 Selective offline Completed: electrical failure 90% 9580 348448423 | |
| # 6 Selective offline Completed: electrical failure 90% 9580 348448423 | |
| # 7 Selective offline Completed: electrical failure 90% 9580 346016892 | |
| # 8 Extended offline Completed: read failure 80% 9575 50725695 | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 50725695 50725894 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment