| File | Code |
|---|---|
JNTHN/Cro-HTTP…/Client.pm6 :325: |
my constant $redirect-codes = set(301, 302, 303, 307, 308); |
JNTHN/Cro-HTTP…/Client.pm6 :359: |
if .status ⊂ $redirect-codes && ($follow !=== False) { |
JNTHN/Cro-HTTP…/http-request-parser.t :798: |
parses 'An application/json request decodes JSON body', |
JNTHN/Cro-HTTP…/http-request-parser.t :812: |
parses 'An media type with the +json suffix decodes JSON body', |
JNTHN/Cro-HTTP…/http-response-parser.t :410: |
parses 'An application/json response decodes JSON body', |
JNTHN/Cro-HTTP…/http-response-parser.t :424: |
parses 'A media type with the +json suffix decodes JSON body', |
JNTHN/Cro-HTTP…/http-response-serializer.t :96: |
q:b:to/RESPONSE/.chop, 'application/json encodes Hash as JSON'; |
JNTHN/Cro-HTTP…/http-response-serializer.t :112: |
q:b:to/RESPONSE/.chop, 'application/json encodes Array as JSON'; |
JNTHN/Cro-HTTP…/http-response-serializer.t :128: |
q:b:to/RESPONSE/.chop, 'application/vnd.foobar+json encodes Hash as JSON'; |
JNTHN/cro…/cro-http-client.md :34: |
have been received. By default, errors (4xx and 5xx status codes) will result |
JNTHN/cro…/cro-http-request.md :20: |
it would give a list `'foo', 'bar'`) and decodes any `%` escapes |
JNTHN/cro…/cro-http-router.md :544: |
Further routines exist for the most common HTTP error codes. These all take |
JNTHN/cro…/cro-http-router.md :560: |
All other response codes are produced by explicitly setting `response.status`. |
JNTHN/cro…/cro-websocket-frame.md :7: |
It exports `Opcode` enum that consists of possible frame opcodes, they |
JNTHN/cro…/cro-websocket-message.md :7: |
## Opcodes |
JNTHN/cro…/cro-websocket-message.md :22: |
values is described in `Opcodes` section. |
JNTHN/cro…/app.js :9940: |
case __WEBPACK_IMPORTED_MODULE_8_keycode___default.a.codes.down: |
JNTHN/cro…/app.js :9948: |
case __WEBPACK_IMPORTED_MODULE_8_keycode___default.a.codes.esc: |
JNTHN/cro…/app.js :9949: |
case __WEBPACK_IMPORTED_MODULE_8_keycode___default.a.codes.tab: |
JNTHN/cro…/app.js :26496: |
// http://stackoverflow.com/questions/5603195/full-list-of-javascript-keycodes |
JNTHN/cro…/app.js :26519: |
// check codes |
JNTHN/cro…/app.js :26520: |
var foundNamedKey = codes[search.toLowerCase()] |
JNTHN/cro…/app.js :26539: |
var codes = exports.code = exports.codes = { |
JNTHN/cro…/app.js :26615: |
for (i = 97; i < 123; i++) codes[String.fromCharCode(i)] = i - 32 |
JNTHN/cro…/app.js :26618: |
for (var i = 48; i < 58; i++) codes[i - 48] = i |
JNTHN/cro…/app.js :26621: |
for (i = 1; i < 13; i++) codes['f'+i] = i + 111 |
JNTHN/cro…/app.js :26624: |
for (i = 0; i < 10; i++) codes['numpad '+i] = i + 96 |
JNTHN/cro…/app.js :26635: |
for (i in codes) names[codes[i]] = i |
JNTHN/cro…/app.js :26639: |
codes[alias] = aliases[alias] |
JNTHN/cro…/app.js :35755: |
// If the codes for two points are different, or are both zero, |
JNTHN/cro…/app.js :40474: |
case __WEBPACK_IMPORTED_MODULE_6_keycode___default.a.codes.left: |
JNTHN/cro…/app.js :40475: |
case __WEBPACK_IMPORTED_MODULE_6_keycode___default.a.codes.up: |
JNTHN/cro…/app.js :40478: |
case __WEBPACK_IMPORTED_MODULE_6_keycode___default.a.codes.right: |
JNTHN/cro…/app.js :40479: |
case __WEBPACK_IMPORTED_MODULE_6_keycode___default.a.codes.down: |
JNTHN/cro…/app.js :44900: |
// doesn't give us keycodes, so we need to blacklist it. |
JNTHN/cro…/app.js :56165: |
// Firefox (pre 40) decodes `%3D` to `=` |
JNTHN/cro…/app.js :75324: |
case __WEBPACK_IMPORTED_MODULE_7_keycode___default.a.codes.down: |
JNTHN/cro…/app.js :75328: |
case __WEBPACK_IMPORTED_MODULE_7_keycode___default.a.codes.up: |
JNTHN/cro…/app.js :75332: |
case __WEBPACK_IMPORTED_MODULE_7_keycode___default.a.codes.esc: |
JNTHN/cro…/app.js :75333: |
case __WEBPACK_IMPORTED_MODULE_7_keycode___default.a.codes.tab: |
JNTHN/cro…/package-lock.json :946: |
"builtin-status-codes": { |
JNTHN/cro…/package-lock.json :948: |
"resolved": "https://registry.npmjs.org/builtin-status-codes/-/builtin-status-codes-3.0.0.tgz", |
JNTHN/cro…/package-lock.json :3226: |
"builtin-status-codes": "3.0.0", |
KOORCHIK/LIVR…/README.md :111: |
* Returns understandable error codes(not error messages) |
KOORCHIK/LIVR…/02-rules-registration.t :70: |
}, 'Should contain error codes'; |
KOORCHIK/LIVR…/03-auto-trim.t :31: |
}, 'Should contain error codes'; |
SACOMO/Magento…/Subroutines.md :341: |
|<div style='white-space: nowrap;'>coupons-delete-by-codes</div>|<div style='white-space: nowrap;'> Hash $config,<br/> Hash :$data!</div>|Delete coupon by coupon codes.|POST|<div style='white-space: nowrap;'>/V1/coupons/deleteByCodes</div>| |
SACOMO/Magento…/SalesRule.pm6 :58: |
our sub coupons-delete-by-codes( |
SACOMO/Magento…/15-salesrule.t :107: |
codes => [ |
SACOMO/Magento…/15-salesrule.t :113: |
coupons-delete-by-codes |
SACOMO/Magento…/15-salesrule.t :116: |
is $t1_results<failed_items>.elems, 0, 'coupons delete-by-codes'; |
SACOMO/Magento…/15-salesrule.t :118: |
}, 'Coupons delete-by-codes'; |
SAMGWISE/PowerNap…/README.md :22: |
When selecting response codes for your controller methods you should consider recent HTTP RFCs or similar. |
SAMGWISE/PowerNap…/PowerNap.pm6 :27: |
When selecting response codes for your controller methods you should consider recent HTTP RFCs or similar. |
SCIMON/Algorithm-GooglePolylineEncoding…/README.md :31: |
Encodes a polyline list (supplied in any of the listed formats) and returns a Str of the encoded data. |
SCIMON/Algorithm-GooglePolylineEncoding…/GooglePolylineEncoding.pm6 :128: |
Encodes a polyline list (supplied in any of the listed formats) and returns a Str of the encoded data. |
SCIMON/Algorithm-GooglePolylineEncoding…/02-encode-number.t :18: |
is encode-number( %test-data<in> ), %test-data<out>, "{%test-data<in>} encodes to {%test-data<out>}"; |
SCIMON/Game-Sudoku…/05-solver.t :6: |
my %codes = ( |
SCIMON/Game-Sudoku…/05-solver.t :14: |
for %codes.keys -> $code { |
SCIMON/Game-Sudoku…/05-solver.t :20: |
is $game.Str, %codes{$code}, "got expected value"; |
TIMOTIMO/JSON-Fast…/Fast.pm :224: |
my int $has_hexcodes; |
TIMOTIMO/JSON-Fast…/Fast.pm :274: |
$has_hexcodes++; |
TIMOTIMO/JSON-Fast…/Fast.pm :300: |
if not $has_treacherous and not $has_hexcodes { |
TIMOTIMO/JSON-Fast…/Fast.pm :325: |
} elsif $has_hexcodes or nqp::elems($escape_counts) { |
TITSUKI/Geo-Hash…/README.md :33: |
Encodes given `$lat` and `$lng` pair with precision of `$precision` and creates a hash value. |
TITSUKI/Geo-Hash…/README.md :41: |
Decodes given `$hash` and creates a `Geo::Hash::Coord` object. |
TITSUKI/Geo-Hash…/Hash.pm6 :56: |
Encodes given C<$lat> and C<$lng> pair with precision of C<$precision> and creates a hash value. |
TITSUKI/Geo-Hash…/Hash.pm6 :64: |
Decodes given C<$hash> and creates a C<Geo::Hash::Coord> object. |
UFOBAT/Bailador…/Changes :44: |
- Ticket #215 - redirect() can set different status codes - 302 is the default |
UFOBAT/Bailador…/README.md :344: |
<html ... codes goes here ...> |
UFOBAT/Bailador…/README.md :361: |
In order to customize the error pages drop a template file with the filename of the HTTP status code and the suffix `.xx` in your views directory. Currently there only two different error codes: `404` and `500`. |
UGEXE/zef…/Client.pm6 :595: |
# Handle exit codes for various option permutations like --force |
WARRINGD/Font-FreeType…/glyph-to-eps.pl :10: |
# Accept character codes in hex or decimal, otherwise assume it's the |
WARRINGD/Font-FreeType…/glyph-to-svg.pl :11: |
# Accept character codes in hex or decimal, otherwise assume it's the |
WARRINGD/Font-FreeType…/render-glyph.pl :17: |
# Accept character codes in hex or decimal, otherwise assume it's the |
WARRINGD/Font-FreeType…/CharMap.md :21: |
A charmap is used to translate character codes in a given encoding into glyph indexes for its parent's face. Some font formats may provide several charmaps per font. |
WARRINGD/Font-FreeType…/CharMap.pm :28: |
A charmap is used to translate character codes in a given encoding into glyph |
WARRINGD/Font-FreeType…/Glyph.md :40: |
The character code (in Unicode) of the glyph. Could potentially return codes in other character sets if the font doesn't have a Unicode character mapping, but most modern fonts do. |
WARRINGD/Font-FreeType…/Glyph.pm :91: |
return codes in other character sets if the font doesn't have a Unicode |
WARRINGD/Font-FreeType…/Native.md :109: |
A handle to a character map (usually abbreviated to ‘charmap’). A charmap is used to translate character codes in a given encoding into glyph indexes |
WARRINGD/Font-FreeType…/Native.pm :120: |
#| A handle to a character map (usually abbreviated to ‘charmap’). A charmap is used to translate character codes in a given encoding into glyph indexes |
WARRINGD/Font-FreeType…/10metrics_verasans.t :112: |
# The expected Unicode codes and names of the glyphs are in a text file. |
WARRINGD/PDF-Class…/pdf-info.p6 :44: |
my UInt $size = $input.codes; |
WARRINGD/PDF-Class…/Type0.pm :13: |
has NameOrCMap $.Encoding is entry(:required); #| (Required) The name of a predefined CMap, or a stream containing a CMap that maps character codes to font numbers and CIDs. |
WARRINGD/PDF-Class…/Type0.pm :15: |
has PDF::DAO::Stream $.ToUnicode is entry; #| (Optional) A stream containing a CMap file that maps character codes to Unicode values |
WARRINGD/PDF-Class…/Type1.pm :31: |
has PDF::DAO::Stream $.ToUnicode is entry; #| (Optional; PDF 1.2) A stream containing a CMap file that maps character codes to Unicode values |
WARRINGD/PDF-Class…/Type3.pm :37: |
has PDF::CMap $.ToUnicode is entry; #| (Optional; PDF 1.2) A stream containing a CMap file that maps character codes to Unicode values |
WARRINGD/PDF-Class…/FontDescriptor.pm :49: |
has Numeric $.MissingWidth is entry; #| (Optional) The width to use for character codes whose widths are not specified in a font dictionary’s Widths array. |
WARRINGD/PDF-Font-Loader…/Identity-H.pm :21: |
my uint16 @codes; |
WARRINGD/PDF-Font-Loader…/Identity-H.pm :26: |
@codes.push: $index; |
WARRINGD/PDF-Font-Loader…/Identity-H.pm :28: |
@codes; |
WARRINGD/PDF-Font-Loader…/Type1.pm :19: |
my %codes; |
WARRINGD/PDF-Font-Loader…/Type1.pm :24: |
%codes{ $!face.glyph-name($char-code) } = $char-code.chr; |
WARRINGD/PDF-Font-Loader…/Type1.pm :27: |
%codes; |
WARRINGD/PDF-Font-Loader…/FreeType.pm :229: |
1 begincodespacerange <{$!first-char.fmt("%04x")}> <{$!last-char.fmt("%04x")}> endcodespacerange |
WARRINGD/PDF-Font-Loader…/encode-cmap.t :26: |
1 begincodespacerange |
WARRINGD/PDF-Font-Loader…/encode-cmap.t :28: |
endcodespacerange |
Bailador/Bailador…/Changes :46: |
- Ticket #215 - redirect() can set different status codes - 302 is the default |
Bailador/Bailador…/README.md :367: |
<html ... codes goes here ...> |
Bailador/Bailador…/README.md :384: |
In order to customize the error pages drop a template file with the filename of the HTTP status code and the suffix `.xx` in your views directory. Currently there only two different error codes: `404` and `500`. |
Demayl/perl6-Email-Valid…/Valid.pm6 :60: |
token email { <mailbox><?{$/<mailbox>.codes <= $mailbox_max_length}> '@' <domain><?{$/<domain>.codes <= $max_length - $mailbox_max_length - 1}> } |
FROGGS/p6-IDNA-Punycode…/basic.t :15: |
is encode_punycode('ยจฆฟคฏข'), 'xn--22cdfh1b8fsa', 'unicode encodes to a..z0..9 only'; |
FROGGS/p6-IDNA-Punycode…/basic.t :18: |
is encode_punycode('☺'), 'xn--74h', 'smiling face encodes to xn--74h'; |
FROGGS/p6-IDNA-Punycode…/basic.t :19: |
is decode_punycode('xn--74h'), '☺', 'xn--74h decodes to smiling face'; |
MARTIMM/BSON…/BSON.pm6 :6: |
# BSON type codes |
MARTIMM/BSON…/Binary.pm6 :153: |
# User defined. That is, all other codes 0x80 .. 0xFF |
MARTIMM/BSON…/Binary.pod6 :33: |
Store binary data in the object. The following codes are available: |
MARTIMM/BSON…/Document.pm6 :764: |
# This entry does 2 codes. 0x0D for javascript only and 0x0F when |
MARTIMM/BSON…/Document1.pm6 :12: |
# BSON type codes |
MARTIMM/BSON…/Document1.pm6 :519: |
# This entry does 2 codes. 0x0D for javascript only and 0x0F when |
MARTIMM/BSON…/Document1.pm6 :1299: |
# User defined. That is, all other codes 0x80 .. 0xFF |
MARTIMM/BSON…/Document2.pm6 :12: |
# BSON type codes |
MARTIMM/BSON…/Document2.pm6 :519: |
# This entry does 2 codes. 0x0D for javascript only and 0x0F when |
MARTIMM/BSON…/Document2.pm6 :1304: |
# User defined. That is, all other codes 0x80 .. 0xFF |
MARTIMM/BSON…/Document3.pm6 :11: |
# BSON type codes |
MARTIMM/BSON…/Document3.pm6 :491: |
# This entry does 2 codes. 0x0D for javascript only and 0x0F when |
MARTIMM/BSON…/Document3.pm6 :1268: |
# User defined. That is, all other codes 0x80 .. 0xFF |
MARTIMM/mongo-perl6-driver…/table-role.pm6 :13: |
# Array index and error codes |
MARTIMM/mongo-perl6-driver…/run-command-find.svg :1: |
<?xml version="1.0" encoding="UTF-8" standalone="no"?><svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" contentScrip… |
MARTIMM/mongo-perl6-driver…/run-command-find.svg :31: |
query: encodes query and send to server |
MARTIMM/mongo-perl6-driver…/run-command-find.svg :32: |
query: decodes result |
MARTIMM/mongo-perl6-driver…/run-command-find.svg :43: |
getmore: encodes query and send to server |
MARTIMM/mongo-perl6-driver…/run-command-find.svg :44: |
getmore: decodes result |
MARTIMM/mongo-perl6-driver…/run-command-find.txt :30: |
query: encodes query and send to server |
MARTIMM/mongo-perl6-driver…/run-command-find.txt :31: |
query: decodes result |
MARTIMM/mongo-perl6-driver…/run-command-find.txt :42: |
getmore: encodes query and send to server |
MARTIMM/mongo-perl6-driver…/run-command-find.txt :43: |
getmore: decodes result |
MARTIMM/mongo-perl6-driver…/2015-11-3-mongodb-dev.txt :28: |
were transmitted using the associated opcodes (OP_INSERT, OP_DELETE, etc) from |
MARTIMM/mongo-perl6-driver…/2015-11-3-mongodb-dev.txt :40: |
Over time, we have replaced most uses of the original opcodes with commands. For |
MARTIMM/mongo-perl6-driver…/TODO.md :19: |
* Table to map mongo status codes to severity level. This will modify the default severity when an error code from the server is received. Look for error table here |
MARTIMM/mongo-perl6-driver…/TODO.md :20: |
* Find a way to incorporate the servers error codes into the log messages when server returns a failure. |
MARTIMM/mongo-perl6-driver…/MongoDB.pm6 :52: |
# Constants. See http://www.mongodb.org/display/DOCS/Mongo+Wire+Protocol#MongoWireProtocol-RequestOpcodes |
MARTIMM/mongo-perl6-driver…/MongoDB.pod6 :198: |
Operational codes to transport data to or from the mongodb server. The codes are |
MARTIMM/mongo-perl6-driver…/Users.pod6 :91: |
4 codes recognized. |
MARTIMM/mongo-perl6-driver…/200-Database.t :50: |
#TODO get all codes and test on code instead of messages to prevent changes |
MattOates/BioInfo…/Seq.pm6 :7: |
$.sequence.codes; |
Perl6-Noise-Gang/Audio-PortMIDI…/PortMIDI.pm :422: |
byte that encodes the command and, for channel messages, the channel |
PowellDean/Locale-Codes-Country…/README.md :22: |
codes for the names of countries, dependent territories, etc. There are |
PowellDean/Locale-Codes-Country…/README.md :23: |
essentially four types of codes associated with each country/area: |
PowellDean/Locale-Codes-Country…/README.md :44: |
of the other ISO-defined codes by passing in any of the other unique values. |
PowellDean/Locale-Codes-Country…/README.md :60: |
I may in the near future add other codes such as IOC designations, or FIPS |
PowellDean/Locale-Codes-Country…/README.md :61: |
codes to the mix. |
PowellDean/Locale-Codes-Country…/Country.pm6 :37: |
sub allCountryCodes($codeset?=LOCALE_CODE_ALPHA_2) is export { |
PowellDean/Locale-Codes-Country…/Country.pm6 :38: |
given $codeset { |
PowellDean/Locale-Codes-Country…/Country.pm6 :50: |
sub codeToCode($code!, $codesetOut?=LOCALE_CODE_ALPHA_2) is export { |
PowellDean/Locale-Codes-Country…/Country.pm6 :53: |
return countryToCode($country, $codesetOut); |
PowellDean/Locale-Codes-Country…/Country.pm6 :79: |
sub countryToCode($country!, $codesetOut?=LOCALE_CODE_ALPHA_2) is export { |
PowellDean/Locale-Codes-Country…/Country.pm6 :110: |
my $code = searchCountryName($commonName, $codesetOut); |
PowellDean/Locale-Codes-Country…/Country.pm6 :115: |
$code = searchCountryName($lookup, $codesetOut); |
PowellDean/Locale-Codes-Country…/Country.pm6 :145: |
sub searchCountryName($country!, $codesetOut?=LOCALE_CODE_ALPHA_2) { |
PowellDean/Locale-Codes-Country…/Country.pm6 :146: |
given $codesetOut { |
Takadonet/Text--Diff…/Diff.pm :245: |
# ## get prefixed with "!", and that the old opcodes are removed. |
Takadonet/Text--Diff…/Table.pm :387: |
Assumes all character codes >= 127 need to be escaped as hex codes, ie that the |
Takadonet/Text--Diff…/Table.pm :391: |
Assumes that control codes (character codes 0..31) that don't have slash-letter |
TiMBuS/Net--IRC…/unsmith :249: |
Don't forget to call your Mother today! I find it works best to call from pay phones with different area codes to get around call screening |
Tux/CSV…/Notes :5: |
trim-leading trim-trailing trim encode wordcase trans indent codes |
Tux/CSV…/CSV.pod6 :2535: |
ANSI escape codes or HTML. |
Tux/CSV…/CSV.pod6 :2608: |
This section describes the error codes that are used in perl5's module |
Tux/CSV…/CSV.pod6 :2680: |
And below should be the complete list of error codes that can be returned: |
ab5tract/Terminal-Print…/README.md :66: |
### It seems to be sending the wrong escape codes when using a different terminal on the same box |
adaptiveoptics/P6-Finance-GDAX-API…/Currency.pm6 :44: |
Currency codes will conform to the ISO 4217 standard where |
araraloren/perl6-app-snippet…/snippet.pm6 :121: |
multi method compile(@args, @codes, :$out, :$err) { |
araraloren/perl6-app-snippet…/snippet.pm6 :127: |
await [ $proc.say($_) for @codes ]; |
araraloren/perl6-app-snippet…/snippet.pm6 :141: |
method compileCode(@codes, $output, :$out, :$err) { |
araraloren/perl6-app-snippet…/snippet.pm6 :151: |
await self.compile(@realargs, @codes, :$out, :$err); |
arnsholt/Algorithm-Viterbi…/Viterbi.pm :235: |
The C<decode> method decodes the input according to the probabilities |
arnsholt/Algorithm-Viterbi…/00-basic.t :18: |
"correctly decodes <1 1 3 3 3 3 1 1 1 1>"); |
arnsholt/Algorithm-Viterbi…/00-basic.t :26: |
"correctly decodes <1 1 3 3 3 3 1 1 1 1>"); |
arnsholt/Net-ZMQ…/Constants.pm6 :135: |
# ZMQ-specific error codes: |
atweiden/txn-parser…/02-posting.t :158: |
my Str @quoted-asset-codes = |
atweiden/txn-parser…/02-posting.t :182: |
┃ ┃ ∙ Asset codes validate successfully, as |
atweiden/txn-parser…/02-posting.t :203: |
@quoted-asset-codes.grep({is-valid-asset-code($_)}).elems == |
atweiden/txn-parser…/02-posting.t :204: |
@quoted-asset-codes.elems, |
atweiden/txn-parser…/02-posting.t :208: |
┃ ┃ ∙ Quoted asset codes validate successfully, as |
atweiden/txn-parser…/03-ledger.t :132: |
slurp 't/data/quoted-asset-codes/quoted-asset-codes.txn'; |
atweiden/txn-parser…/03-ledger.t :155: |
┃ ┃ ∙ Journal with quoted asset codes validates |
autarch/perl6-Pod-TreeWalker…/basic.t :168: |
}, 'formatting codes'; |
azawawi/farabi6…/codemirror.js :8476: |
// One-char codes used for character types: |
azawawi/farabi6…/perl6-mode.js :295: |
"perl graphs codes bytes clone print open read write readline say seek", |
azawawi/perl6-electron…/rpcclient.js :168: |
//TODO Deal with 401 and other codes |
azawawi/perl6-gtk-scintilla…/ScintillaCocoa.mm :2182: |
* Helper function to translate OS X key codes to Scintilla key codes. |
azawawi/perl6-gtk-scintilla…/ScintillaDoc.html :545: |
<code>cpMin</code> or <code>cpMax</code>. Positions outside the document return character codes |
azawawi/perl6-gtk-scintilla…/ScintillaDoc.html :2540: |
characters with codes less than 0x20, with word characters set to alphanumeric and '_'. |
azawawi/perl6-gtk-scintilla…/ScintillaDoc.html :3204: |
<p>Control characters (characters with codes less than 32, or between 128 and 159 in some encodings) |
azawawi/perl6-gtk-scintilla…/ScintillaDoc.html :6559: |
in <code>Scintilla.h</code>. There are two codes in this sequence that do not use lexers: |
azawawi/perl6-gtk-scintilla…/ScintillaDoc.html :6675: |
but there is nothing to stop you using any non-separator character codes from 1 to 255 |
azawawi/perl6-gtk-scintilla…/ScintillaDoc.html :7528: |
behaviour of the standard Edit control. Unfortunately, these codes do not match the Windows Edit |
azawawi/perl6-gtk-scintilla…/ScintillaDoc.html :7529: |
notification codes <code>EN_SETFOCUS</code> (256) and <code>EN_KILLFOCUS</code> (512). It is |
azawawi/perl6-gtk-scintilla…/ScintillaDoc.html :7530: |
now too late to change the Scintilla codes as clients depend on the current values.</p> |
azawawi/perl6-gtk-scintilla…/ScintillaHistory.html :6380: |
Added key codes for Windows key and Menu key. |
azawawi/perl6-gtk-scintilla…/ScintillaHistory.html :7797: |
SciTE on Windows can use VK_* codes for keys in user.shortcuts. |
azawawi/perl6-gtk-scintilla…/Scintilla.iface :1181: |
# This encodes an integer level along with flags indicating whether the |
azawawi/perl6-gtk-scintilla…/Scintilla.iface :2730: |
# Symbolic key codes and modifier flags. |
azawawi/perl6-gtk-scintilla…/LexCsound.cxx :208: |
"Opcodes", |
azawawi/perl6-gtk-scintilla…/LexMMIXAL.cxx :53: |
WordList &opcodes = *keywordlists[0]; |
azawawi/perl6-gtk-scintilla…/LexMMIXAL.cxx :125: |
if (opcodes.InList(s)) { |
azawawi/perl6-gtk-scintilla…/catch.hpp :5992: |
// use POSIX/ ANSI console terminal codes |
azawawi/perl6-gtk-scintilla…/ScintillaWin.cxx :655: |
/** Map the key codes to their equivalent SCK_ form. */ |
azawawi/perl6-libzip…/NativeCall.pm6 :54: |
# libzip error codes |
azawawi/perl6-net-curl…/sampleconv.c :24: |
would invoke callbacks to do its own codeset conversions instead of |
azawawi/perl6-net-curl…/sampleconv.c :27: |
The IBM-1047 EBCDIC codeset is used for this example but the code |
azawawi/perl6-net-curl…/sampleconv.c :28: |
would be similar for other non-ASCII codesets. |
azawawi/perl6-net-curl…/sampleconv.c :93: |
/* use platform-specific functions for codeset conversions */ |
azawawi/perl6-net-curl…/Curl.pm6 :289: |
# CURLcode - status codes |
azawawi/perl6-net-curl…/NativeCall.pm6 :1135: |
# * Unescapes URL encoding in strings (converts all %XX codes to their 8bit |
azawawi/perl6-net-curl…/NativeCall.pm6 :1138: |
# * Conversion Note: On non-ASCII platforms the ASCII %XX codes are |
bbkr/jsonrpc…/README.md :69: |
* 1.1 - Rejected. This working draft forces error reporting through HTTP codes making whole communication transport-dependent. |
bbkr/jsonrpc…/RPC.pm6 :2: |
# derived from http://xmlrpc-epi.sourceforge.net/specs/rfc.fault\_codes.php |
bradclawsie/Context…/README.md :16: |
Now assume the same program encodes values into some protocol mechanism such |
bradclawsie/Context…/Context.pm6 :19: |
Now assume the same program encodes values into some protocol mechanism such |
briandfoy/perl6-chemistry-elements…/README.md :26: |
that lists the language codes. See _lib/Chemistry/Languages/en.txt_ for |
cbk/WebService-GoogleDyDNS…/README.md :18: |
* One of the response codes from domains.google.com |
cjfields/bioperl6…/Fuzzy.pm6 :210: |
# $self->warn("Fuzzy codes for start are in a strange state, (". |
cjfields/bioperl6…/CodonTable.t :60: |
# a more comprehensive test on ambiguous codes |
cygx/p6-tinycc-resources-win64…/malloc.h :31: |
/* Return codes for _heapwalk() */ |
dmaestro/SQL-Lexer…/sql-2003-2.bnf :6460: |
--h2 23 Status codes |
dmaestro/SQL-Lexer…/sql-2003-2.bnf :6483: |
Some such class codes are reserved for use by specific International |
dmaestro/SQL-Lexer…/sql-2003-2.bnf :6645: |
--## <tr><td> X </td><td> Remote Database Access </td><td> HZ </td><td> (See Table 32, 'SQLSTATE class codes for RDA', for the definition of protocol subconditions and subclass code values) </td><td> </td></tr> |
dnmfarrell/Pod-Perl5…/Grammar.pm6 :65: |
# same as singleline-text but excludes other formatting codes |
dnmfarrell/Pod-Perl5…/Grammar.pm6 :80: |
# can include other format codes |
dnmfarrell/Pod-Perl5…/Grammar.pm6 :153: |
# formatting codes |
dnmfarrell/Pod-Perl5…/ToHTML.pm6 :179: |
# formatting codes |
dnmfarrell/Pod-Perl5…/ToMarkdown.pm6 :148: |
# formatting codes |
dnmfarrell/Pod-Perl5…/01_formatting.t :8: |
ok my $match = Pod::Perl5::Grammar.parsefile('t/test-corpus/formatting_codes.pod'), |
dnmfarrell/Pod-Perl5…/01_formatting.t :9: |
'parse formatting codes'; |
dnmfarrell/Pod-Perl5…/Formatting.t :9: |
my $target_html = 't/test-corpus/formatting_codes.html'.IO.slurp; |
dnmfarrell/Pod-Perl5…/Formatting.t :12: |
ok my $match = Pod::Perl5::Grammar.parsefile('t/test-corpus/formatting_codes.pod', :$actions), 'convert string to html'; |
dnmfarrell/Pod-Perl5…/paragraphs_advanced.pod :10: |
You can use formatting codes in ordinary paragraphs, for bold, italic, |
dnmfarrell/Pod-Perl5…/paragraphs_advanced.pod :11: |
"code-style", hyperlinks, and more. Such codes are explained in the |
dnmfarrell/Pod-PerlTricks…/README.pod :142: |
=head2 New formatting codes |
dnmfarrell/Pod-PerlTricks…/Grammar.pm6 :5: |
# new formatting codes! |
dnmfarrell/Pod-PerlTricks…/ToHTML.pm6 :37: |
# formatting codes |
drforr/perl6-ANTLR4…/TURTLE.g4 :66: |
//IRIREF : '<' (~(['\u0000'..'\u0020']|'<'|'>'|'"'|'{'|'}'|'|'|'^'|'`'|'\\') | UCHAR)* '>'; /* \u00=NULL #01-\u1F=control codes \u20=space */ |
drforr/perl6-Marpa…/Marpa.pm6 :203: |
#|{ Error codes are usually kept in the base grammar, which leaves marpa_g_new() no place to put its error code on failure. Objects of the Marpa-Config class provide such a place. p_error_string is reserved for use by the internals. Applications should set it to NULL. |
drforr/perl6-Marpa…/Marpa.pm6 :539: |
Possible failures, with their error codes, include: |
drforr/perl6-Marpa…/Marpa.pm6 :877: |
More details of these can be found under the description of the appropriate code. See External error codes. |
drforr/perl6-Marpa…/Marpa.pm6 :982: |
Several error codes leave the recognizer in a fully recoverable state, allowing the application to retry the marpa_r_alternative() me… |
drforr/perl6-Marpa…/Marpa.pm6 :984: |
The error codes MARPA-ERR-DUPLICATE-TOKEN, MARPA-ERR-NO-TOKEN-EXPECTED-HERE and MARPA-ERR-INACCESSIBLE-TOKEN also leave the recognize… |
fayland/perl6-Locale-Codes…/META6.json :6: |
"description" : "Locale codes - Country, Currency, Langauge", |
fayland/perl6-Locale-Codes…/README.md :12: |
my @codes = all_country_codes(); |
fayland/perl6-Locale-Codes…/README.md :19: |
my @codes = all_currency_codes(); |
fayland/perl6-Locale-Codes…/README.md :26: |
my @codes = all_language_codes(); |
fayland/perl6-Locale-Codes…/README.md :54: |
### all_country_codes |
fayland/perl6-Locale-Codes…/README.md :57: |
my @codes = all_country_codes(); # alpha-2 |
fayland/perl6-Locale-Codes…/README.md :58: |
my @codes = all_country_codes('alpha-3'); |
fayland/perl6-Locale-Codes…/README.md :59: |
my @codes = all_country_codes(LOCALE_CODE_NUMERIC); |
fayland/perl6-Locale-Codes…/README.md :88: |
### all_currency_codes |
fayland/perl6-Locale-Codes…/README.md :91: |
my @codes = all_currency_codes(); # alpha |
fayland/perl6-Locale-Codes…/README.md :92: |
my @codes = all_currency_codes(LOCALE_CURR_NUMERIC); |
fayland/perl6-Locale-Codes…/README.md :123: |
### all_language_codes |
fayland/perl6-Locale-Codes…/README.md :126: |
my @codes = all_language_codes(); # alpha |
fayland/perl6-Locale-Codes…/README.md :127: |
my @codes = all_language_codes(LOCALE_LANG_ALPHA_3); |
fayland/perl6-Locale-Codes…/README.md :156: |
### all_script_codes |
fayland/perl6-Locale-Codes…/README.md :159: |
my @codes = all_script_codes(); # alpha |
fayland/perl6-Locale-Codes…/README.md :160: |
my @codes = all_script_codes(LOCALE_SCRIPT_NUMERIC); |
fayland/perl6-Locale-Codes…/Country.pm :23: |
our sub country2code($name, $codeset='alpha-2') is export { |
fayland/perl6-Locale-Codes…/Country.pm :24: |
return data()<name>{$codeset}{lc $name}; |
fayland/perl6-Locale-Codes…/Country.pm :27: |
our sub all_country_codes($codeset='alpha-2') is export { |
fayland/perl6-Locale-Codes…/Country.pm :28: |
return data()<code>{$codeset}.keys.sort; |
fayland/perl6-Locale-Codes…/Currency.pm :20: |
our sub currency2code($name, $codeset='alpha') is export { |
fayland/perl6-Locale-Codes…/Currency.pm :21: |
return data()<name>{$codeset}{lc $name}; |
fayland/perl6-Locale-Codes…/Currency.pm :24: |
our sub all_currency_codes($codeset='alpha') is export { |
fayland/perl6-Locale-Codes…/Currency.pm :25: |
return data()<code>{$codeset}.keys.sort; |
fayland/perl6-Locale-Codes…/Language.pm :13: |
our sub code2language($code, $codeset='alpha-3') is export { |
fayland/perl6-Locale-Codes…/Language.pm :17: |
if $codeset == 'term' { |
fayland/perl6-Locale-Codes…/Language.pm :25: |
our sub language2code($name, $codeset='alpha-2') is export { |
fayland/perl6-Locale-Codes…/Language.pm :26: |
return data()<name>{$codeset}{lc $name}; |
fayland/perl6-Locale-Codes…/Language.pm :29: |
our sub all_language_codes($codeset='alpha-2') is export { |
fayland/perl6-Locale-Codes…/Language.pm :30: |
return data()<code>{$codeset}.keys.sort; |
fayland/perl6-Locale-Codes…/Script.pm :20: |
our sub script2code($name, $codeset='alpha') is export { |
fayland/perl6-Locale-Codes…/Script.pm :21: |
return data()<name>{$codeset}{lc $name}; |
fayland/perl6-Locale-Codes…/Script.pm :24: |
our sub all_script_codes($codeset='alpha') is export { |
fayland/perl6-Locale-Codes…/Script.pm :25: |
return data()<code>{$codeset}.keys.sort; |
fayland/perl6-Locale-Codes…/country.t :13: |
my @codes = all_country_codes(); |
fayland/perl6-Locale-Codes…/country.t :14: |
ok @codes.grep(/^JP$/); |
fayland/perl6-Locale-Codes…/country.t :15: |
ok @codes.grep(/^NO$/); |
fayland/perl6-Locale-Codes…/country.t :17: |
@codes = all_country_codes(LOCALE_CODE_ALPHA_3); |
fayland/perl6-Locale-Codes…/country.t :18: |
ok @codes.grep(/^CHN$/); |
fayland/perl6-Locale-Codes…/country.t :19: |
ok @codes.grep(/^NOR$/); |
fayland/perl6-Locale-Codes…/currency.t :10: |
my @codes = all_currency_codes(); |
fayland/perl6-Locale-Codes…/currency.t :11: |
ok @codes.grep(/^USD$/); |
fayland/perl6-Locale-Codes…/currency.t :12: |
ok @codes.grep(/^EUR$/); |
fayland/perl6-Locale-Codes…/language.t :9: |
my @codes = all_language_codes(); |
fayland/perl6-Locale-Codes…/language.t :10: |
ok @codes.grep(/^EN$/); |
fayland/perl6-Locale-Codes…/language.t :11: |
ok @codes.grep(/^FR$/); |
fayland/perl6-Locale-Codes…/language.t :13: |
@codes = all_language_codes(LOCALE_LANG_ALPHA_3); |
fayland/perl6-Locale-Codes…/language.t :14: |
ok @codes.grep(/^ENG$/); |
fayland/perl6-Locale-Codes…/language.t :15: |
ok @codes.grep(/^FRE$/); |
fayland/perl6-Locale-Codes…/script.t :8: |
my @codes = all_script_codes(); |
fayland/perl6-Locale-Codes…/script.t :9: |
ok @codes.grep(/^Phnx$/); |
gabrielash/perl6-zmq…/11.t :97: |
ok $rc.encode('UTF-8').bytes == $lsent, "message receive with correct length $lsent = {$rc.codes }" ; |
gfldex/perl6-pod-to-bigpage…/html.xhtml :1892: |
<p>Pod has changed between Perl 5 and Perl 6. Probably the biggest difference is that you need to enclose your pod between <span class="code">=begin… |
gfldex/perl6-pod-to-bigpage…/html.xhtml :13137: |
<p><span class="code">RAKUDO_ERROR_COLOR</span> (<i>Bool</i>; <span class="code">src/core/Exception.pm</span>) Controls whether to emit ANSI codes for error highlighting. Defaults to true if unset, except on Win32.</p> |
gfldex/perl6-pod-to-bigpage…/html.xhtml :13887: |
<pre class="code">method new(*@codes)</pre> |
gfldex/perl6-pod-to-bigpage…/html.xhtml :14513: |
<tr><td>codes</td> <td>Str</td></tr> |
gfldex/perl6-pod-to-bigpage…/html.xhtml :14891: |
<a name="t66.1.43"></a><h2 id="_type_Cool.pod6-routine_codes">66.1.43 routine codes</h2> |
gfldex/perl6-pod-to-bigpage…/html.xhtml :14893: |
<pre class="code">sub codes(Str(Cool)) |
gfldex/perl6-pod-to-bigpage…/html.xhtml :14894: |
method codes()</pre> |
gfldex/perl6-pod-to-bigpage…/html.xhtml :14896: |
<pre class="code">codes STRING |
gfldex/perl6-pod-to-bigpage…/html.xhtml :14897: |
STRING.codes</pre> |
gfldex/perl6-pod-to-bigpage…/html.xhtml :14899: |
<pre class="code">say 'møp'.codes; # 3</pre> |
gfldex/perl6-pod-to-bigpage…/html.xhtml :19422: |
<p>Returns a list of formatting codes that are allowed inside the code block.</p> |
gfldex/perl6-pod-to-bigpage…/html.xhtml :19604: |
<p>Calls method <span class="code">gist</span> on the <span class="code">$output</span>, adds a newline, encodes it as UTF-8, and sends it to the standard input stream of the external program, encoding it as UTF-8.</p> |
gfldex/perl6-pod-to-bigpage…/html.xhtml :20801: |
<p>Perl 6 does not have a <span class="code">length</span> function. See <a href="#_routine_chars.pod6">chars</a>, <a href="#_routine_elems.pod6">elems</a>, or <a href="#_routine_codes.pod6">codes</a>.</p> |
gfldex/perl6-pod-to-bigpage…/html.xhtml :21686: |
<pre class="code">method new(*@codes) returns Uni:D</pre> |
gfldex/perl6-pod-to-bigpage…/html.xhtml :21700: |
<a name="t171.1.6"></a><h2 id="_type_Uni.pod6-method_codes">171.1.6 method codes</h2> |
gfldex/perl6-pod-to-bigpage…/html.xhtml :21701: |
<pre class="code">method codes(Uni:D:) returns Int:D</pre> |
gfldex/perl6-pod-to-bigpage…/html.xhtml :24536: |
<a href="#t66.1.43"><li class="toc-level toc-level-2"><span class="toc-number">66.1.43</span> routine codes</li></a> |
gfldex/perl6-pod-to-bigpage…/html.xhtml :25572: |
<a href="#t171.1.6"><li class="toc-level toc-level-2"><span class="toc-number">171.1.6</span> method codes</li></a> |
hoelzro/p6-linenoise…/linenoise.c :1298: |
/* This special mode is used by linenoise in order to print scan codes |
hoelzro/p6-linenoise…/linenoise.c :1300: |
* by the linenoise_example program using the --keycodes option. */ |
hoelzro/p6-linenoise…/linenoise.c :1304: |
printf("Linenoise key codes debugging mode.\n" |
hoelzro/p6-linenoise…/linenoise.c :1305: |
"Press keys to see scan codes. Type 'quit' at any time to exit.\n"); |
jamesalbert/JSON-WebToken…/README.md :74: |
This method decodes a hash from JWT string. |
jamesalbert/JSON-WebToken…/WebToken.pod6 :64: |
This method decodes a hash from JWT string. |
japhb/Text-MiscUtils…/README.md :45: |
They get regular use by my other modules/programs, but are by no means perfect. For example, while the utilities in Text::MiscUtils::Layout should wo… |
japhb/Text-MiscUtils…/MiscUtils.pm6 :50: |
with embedded ANSI color codes (ignoring them for purposes of calculating space |
japhb/Text-MiscUtils…/02-layout.t :123: |
'text-columns with ragged multi-line blocks, embedded ANSI color codes, and zero width'; |
japhb/Text-MiscUtils…/02-layout.t :126: |
'text-columns with ragged multi-line blocks, embedded ANSI color codes, and not enough width'; |
japhb/Text-MiscUtils…/02-layout.t :129: |
'text-columns with ragged multi-line blocks, embedded ANSI color codes, and more than enough width'; |
jnthn/grammar-debugger…/Debugger.pm6 :52: |
On Windows, you might have to do something to interpret the ANSI codes: |
jnthn/p6-http-hpack…/README.md :40: |
Decoding of headers compressed using the Huffman codes (set out in the RFC) takes |
jnthn/p6-http-hpack…/HPACK.pm6 :3: |
# Static HPACK Huffman codes table, per RFC 7541 Appendix B. |
jonathanstowe/Doublephone…/README.md :28: |
"cross language" comparison is required then either of the primary or secondary codes can be matched |
jonathanstowe/Doublephone…/Doublephone.pm :36: |
comparison is required then either of the primary or secondary codes can |
jonathanstowe/Doublephone…/double_metaphone.c :200: |
DoubleMetaphone(char *str, char **codes) |
jonathanstowe/Doublephone…/double_metaphone.c :1188: |
*codes = primary->str; |
jonathanstowe/Doublephone…/double_metaphone.c :1189: |
*++codes = secondary->str; |
jonathanstowe/Doublephone…/double_metaphone.h :17: |
char **codes); |
jonathanstowe/META6…/projects.json :2701: |
"description" : "Two letter codes for identifying United States territories and vice versa", |
jonathanstowe/META6…/projects.json :7125: |
"description" : "Locale codes - Country, Currency, Langauge", |
jonathanstowe/RPi-Device-SMBus…/i2c-dev.h :102: |
Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */ |
jonathanstowe/p6-fcgi…/fcgiapp.c :1433: |
* Return codes for Process* functions |
jonathanstowe/p6-fcgi…/fcgiapp.h :38: |
* Error codes. Assigned to avoid conflict with EOF and errno(2). |
jpve/perl6-net-packet…/README.md :58: |
if $eth.pl ~~ IPv4 { # .pl (for PayLoad) decodes the payload |
jpve/perl6-net-packet…/ALL.md :40: |
if $eth.pl ~~ IPv4 { # .pl (for PayLoad) decodes the payload |
jpve/perl6-net-packet…/ALL.md :69: |
Decodes a 16-bit integer from $buf, starting at $buf[$i]. |
jpve/perl6-net-packet…/ALL.md :72: |
Decodes a 32-bit integer from $buf, starting at $buf[$i]. |
jpve/perl6-net-packet…/Net-Packet.md :35: |
if $eth.pl ~~ IPv4 { # .pl (for PayLoad) decodes the payload |
jpve/perl6-net-packet…/Net-Packet.md :64: |
Decodes a 16-bit integer from $buf, starting at $buf[$i]. |
jpve/perl6-net-packet…/Net-Packet.md :67: |
Decodes a 32-bit integer from $buf, starting at $buf[$i]. |
jpve/perl6-net-packet…/Packet.pm6 :36: |
if $eth.pl ~~ IPv4 { # .pl (for PayLoad) decodes the payload |
jpve/perl6-net-packet…/Packet.pm6 :66: |
Decodes a 16-bit integer from $buf, starting at $buf[$i]. |
jpve/perl6-net-packet…/Packet.pm6 :76: |
Decodes a 32-bit integer from $buf, starting at $buf[$i]. |
jpve/perl6-net-packet…/ARP.t :42: |
'.hw_type: Decodes hardware type to ARP::HardwareType'; |
jpve/perl6-net-packet…/ARP.t :44: |
'.hw_type: Decodes hardware type'; |
jpve/perl6-net-packet…/ARP.t :47: |
'.proto_type: Decodes protocol type to EtherType'; |
jpve/perl6-net-packet…/ARP.t :49: |
'.proto_type: Decodes protocol type'; |
jpve/perl6-net-packet…/ARP.t :52: |
'.hw_len: Decodes hardware address length'; |
jpve/perl6-net-packet…/ARP.t :54: |
'.proto_len: Decodes protocol address length'; |
jpve/perl6-net-packet…/ARP.t :57: |
'.operation: Decodes operation to ARP::Operation'; |
jpve/perl6-net-packet…/ARP.t :59: |
'.operation: Decodes operation code'; |
jpve/perl6-net-packet…/ARP.t :62: |
'.src_hw_addr: Decodes source hardware address to MAC address'; |
jpve/perl6-net-packet…/ARP.t :64: |
'.src_hw_addr: Decodes source hardware address'; |
jpve/perl6-net-packet…/ARP.t :66: |
'.src_proto_addr: Decodes source protocol address to IPv4 address'; |
jpve/perl6-net-packet…/ARP.t :68: |
'.src_proto_addr: Decodes source ip address'; |
jpve/perl6-net-packet…/ARP.t :71: |
'.dst_hw_addr: Decodes source hardware address to MAC address'; |
jpve/perl6-net-packet…/ARP.t :73: |
'.dst_hw_addr: Decodes source hardware address'; |
jpve/perl6-net-packet…/ARP.t :75: |
'.dst_proto_addr: Decodes source protocol address to IPv4 address'; |
jpve/perl6-net-packet…/ARP.t :77: |
'.dst_proto_addr: Decodes source ip address'; |
jpve/perl6-net-packet…/Ethernet.t :30: |
'.Int: Decodes address'; |
jpve/perl6-net-packet…/Ethernet.t :43: |
'.src: Decodes source address to a MAC_addr object'; |
jpve/perl6-net-packet…/Ethernet.t :45: |
'.src: Decodes source address correctly'; |
jpve/perl6-net-packet…/Ethernet.t :48: |
'.dst: Decodes destination address to a MAC_addr object'; |
jpve/perl6-net-packet…/Ethernet.t :50: |
'.dst: Decodes destination address correctly'; |
jpve/perl6-net-packet…/Ethernet.t :53: |
'.type: Decodes type to EtherType'; |
jpve/perl6-net-packet…/Ethernet.t :55: |
'.type: Decodes EthernetType'; |
jpve/perl6-net-packet…/ICMP.t :32: |
'Decodes type field correctly'; |
jpve/perl6-net-packet…/ICMP.t :34: |
'Decodes code field correctly'; |
jpve/perl6-net-packet…/ICMP.t :36: |
'Decodes checksum field correctly'; |
jpve/perl6-net-packet…/ICMP.t :39: |
'Decodes id field correctly'; |
jpve/perl6-net-packet…/ICMP.t :41: |
'Decodes sequence number field correctly'; |
jpve/perl6-net-packet…/IPv4.t :47: |
'.Int: Decodes address'; |
jpve/perl6-net-packet…/IPv4.t :60: |
'.ihl: Decodes internet header length'; |
jpve/perl6-net-packet…/IPv4.t :62: |
'.dscp: Decodes DSCP field'; |
jpve/perl6-net-packet…/IPv4.t :64: |
'.ecn: Decodes ECN field'; |
jpve/perl6-net-packet…/IPv4.t :66: |
'.total_length: Decodes total length field'; |
jpve/perl6-net-packet…/IPv4.t :68: |
'.id: Decodes identification field'; |
jpve/perl6-net-packet…/IPv4.t :70: |
'.flags: Decodes flags'; |
jpve/perl6-net-packet…/IPv4.t :72: |
'.fragment_offset: Decodes fragment offset field'; |
jpve/perl6-net-packet…/IPv4.t :74: |
'.ttl: Decodes ttl field'; |
jpve/perl6-net-packet…/IPv4.t :77: |
'.proto: Decodes proto field to IP_proto type'; |
jpve/perl6-net-packet…/IPv4.t :79: |
'.proto: Decodes proto field'; |
jpve/perl6-net-packet…/IPv4.t :82: |
'.hdr_chksum: Decodes header checksum field'; |
jpve/perl6-net-packet…/IPv4.t :85: |
'.src: Decodes source address to a IPv4_addr object'; |
jpve/perl6-net-packet…/IPv4.t :87: |
'.src: Decodes source address correctly'; |
jpve/perl6-net-packet…/IPv4.t :90: |
'.dst: Decodes destination address to a IPv4_addr object'; |
jpve/perl6-net-packet…/IPv4.t :92: |
'.dst: Decodes destination address correctly'; |
jpve/perl6-net-packet…/UDP.t :31: |
'.src_port: Decodes source port correctly'; |
jpve/perl6-net-packet…/UDP.t :33: |
'.dst_port: Decodes destination port correctly'; |
jpve/perl6-net-packet…/UDP.t :36: |
'.length: Decodes length correctly'; |
jpve/perl6-net-packet…/UDP.t :38: |
'.chksum: Decodes chksum correctly'; |
jpve/perl6-net-pcap…/open_offline.t :14: |
'Decodes seconds correctly'; |
jpve/perl6-net-pcap…/open_offline.t :17: |
'Decodes captured length correctly'; |
jpve/perl6-net-pcap…/open_offline.t :20: |
'Decodes length correctly'; |
jpve/perl6-net-pcap…/open_offline.t :32: |
'Decodes ethernet source correctly'; |
jsimonet/IRC-Client-Plugin-UserPoints…/UserPoints.pm6 :105: |
if $e.channel.codes + $e.nick.codes + 2 + $response.codes + "$k: $v, ".codes + 20 > 512 { |
masak/gge…/Perl6Regex.pm :19: |
my &unescape = -> @codes { join '', map { chr(:16($_)) }, @codes }; |
nkh/P6-Data-Dump-Tree…/README.md :653: |
Uses ASCII codes rather than Unicode to render the tree. |
nkh/P6-Data-Dump-Tree…/README.md :661: |
Renders string containing control codes (eg: \n, ANSI, ...) with backslashed codes and hex values. |
nkh/P6-Data-Dump-Tree…/Tree.pm :540: |
@vs = $v2_width == $v2.chars # no color codes in $v2 |
nkh/P6-Data-Dump-Tree…/Tree.pm :624: |
# given a, possibly empty, string with ANSI color codes, split the string on \n and width |
nkh/P6-Data-Dump-Tree…/Tree.pod :693: |
Uses ASCII codes rather than Unicode to render the tree. |
nkh/P6-Data-Dump-Tree…/Tree.pod :702: |
Renders string containing control codes (eg: \n, ANSI, ...) with backslashed |
nkh/P6-Data-Dump-Tree…/Tree.pod :703: |
codes and hex values. |
nkh/P6-Data-Dump-Tree…/MultiColumns.pm :103: |
# compute width without ANSI escape codes |
nkh/P6-Grammar-Tracer-Compact…/Compact.pm :5: |
# - to strip all the escape codes: perl6 MyGrammar.pm | perl -e "print s/\e\[[0-9;]+m//gr while (<>)" |
p6-css/CSS-Writer-p6…/Writer.pm :12: |
has %!color-names; #- maps rgb hex codes to named colors |
p6-pdf/PDF-Content-p6…/Changes :18: |
-- secondly to unmapped codes in the encoding scheme |
p6-pdf/PDF-Content-p6…/symbol.txt :53: |
# some character codes being mapped to 2 Unicode values; use of Corporate |
p6-pdf/PDF-Content-p6…/zdingbat.txt :52: |
# notes above) results in some character codes being mapped to 2 Unicode |
p6-pdf/PDF-Content-p6…/images.t :26: |
is $jpeg.encoded.codes, $jpeg<Length>, 'jpeg encoded length'; |
p6-pdf/PDF-Content-p6…/images.t :41: |
is $gif.encoded.codes, $gif<Length>, 'gif encoded length'; |
p6-pdf/PDF-Grammar-p6…/Changes :6: |
- Optimized hex string parsing. Hex codes in names must have 2-digits |
p6-pdf/PDF-Grammar-p6…/Changes :58: |
- tweaked ind-obj-nibble rule to use .codes rather than .chars to compute |
p6-pdf/PDF-Grammar-p6…/Actions.pm :36: |
my @hex-codes = $xdigits.comb.map: -> $a, $b = '0' { :16($a ~ $b) }; |
p6-pdf/PDF-Grammar-p6…/Actions.pm :37: |
my $hex-string = [~] @hex-codes.map({ chr($_) }); |
p6-pdf/PDF-Grammar-p6…/Content.pm :150: |
# catchall for unknown opcodes and arguments |
p6-pdf/PDF-Grammar-p6…/Fast.pm :59: |
# catchall for unknown opcodes and arguments |
p6-pdf/PDF-Grammar-p6…/Actions.pm :14: |
my $start = (~$/).codes; |
p6-pdf/PDF-Grammar-p6…/content-parse.t :31: |
(Some random test opcodes)Tj |
p6-pdf/PDF-Grammar-p6…/pdf-regex.t :209: |
", $content3.codes, $content3; |
p6-pdf/PDF-Lite-p6…/README.md :296: |
my $size = $xobject.encoded.codes; |
p6-pdf/PDF-p6…/PDF.pm :84: |
my Numeric $offset = $.reader.input.codes + Preamble.codes; |
p6-pdf/PDF-p6…/Stream.pm :34: |
self<Length> = .codes with $!encoded; |
p6-pdf/PDF-p6…/Stream.pm :42: |
self<Length> //= .codes with $!encoded; |
p6-pdf/PDF-p6…/Stream.pm :48: |
self<Length> = .codes with $stream; |
p6-pdf/PDF-p6…/Stream.pm :111: |
self<Length> = $!decoded.codes; |
p6-pdf/PDF-p6…/ObjStm.pm :43: |
@idx.push: $objects-str.codes; |
p6-pdf/PDF-p6…/ObjStm.pm :47: |
self<First> = idx-str.codes + 1; |
p6-pdf/PDF-p6…/ObjStm.pm :75: |
!! objects-str.codes; |
p6-pdf/PDF-p6…/ObjStm.pm :78: |
if begin > objects-str.codes; |
p6-pdf/PDF-p6…/Blob.pm :3: |
method codes { self.bytes } |
p6-pdf/PDF-p6…/Blob.pm :8: |
my UInt \from = $from-whatever( $.codes ); |
p6-pdf/PDF-p6…/AST.pm :31: |
$ast<dict><Length> = %( :int(.codes) ) |
p6-pdf/PDF-p6…/ASCII85.pm :67: |
my $padding = -$str.codes % 5; |
p6-pdf/PDF-p6…/ASCIIHex.pm :44: |
unless $str.codes %% 2; |
p6-pdf/PDF-p6…/Handle.pm :10: |
has UInt $.codes is rw; |
p6-pdf/PDF-p6…/Handle.pm :14: |
$!codes = $!value.tell; |
p6-pdf/PDF-p6…/Handle.pm :19: |
$.substr(0, $!codes); |
p6-pdf/PDF-p6…/Handle.pm :23: |
my UInt $from = $whence( $!codes ); |
p6-pdf/PDF-p6…/Handle.pm :27: |
multi method subbuf( UInt $from!, UInt $length = $.codes - $from + 1 --> Blob) { |
p6-pdf/PDF-p6…/Str.pm :15: |
my \n = min($n, $.codes - $!pos); |
p6-pdf/PDF-p6…/Str.pm :21: |
$!pos = min($n, $.codes); |
p6-pdf/PDF-p6…/Str.pm :24: |
$!pos = min($!pos + $n, $.codes); |
p6-pdf/PDF-p6…/Str.pm :27: |
$!pos = max(0, $.codes - $n); |
p6-pdf/PDF-p6…/Str.pm :30: |
my \codes = $.codes; |
p6-pdf/PDF-p6…/Str.pm :33: |
!! $.ords.subbuf($!pos, codes - $!pos).decode: "latin-1"; |
p6-pdf/PDF-p6…/Str.pm :34: |
$!pos = codes; |
p6-pdf/PDF-p6…/Str.pm :37: |
method eof { $!pos >= $.codes } |
p6-pdf/PDF-p6…/Reader.pm :529: |
my UInt \tail-bytes = min(1024, $.input.codes); |
p6-pdf/PDF-p6…/Reader.pm :540: |
my UInt \input-bytes = $.input.codes; |
p6-pdf/PDF-p6…/Reader.pm :625: |
dict<Length> = :int(stream<encoded>.codes) |
p6-pdf/PDF-p6…/Writer.pm :62: |
$!offset += trailer-bytes.codes + 2 * "\n".codes; |
p6-pdf/PDF-p6…/Writer.pm :83: |
$!offset += bytes.codes + 1; |
p6-pdf/PDF-p6…/Writer.pm :100: |
$!offset += xref-str.codes; |
p6-pdf/PDF-p6…/Writer.pm :267: |
$!offset = header.codes + comment.codes + 2; # since format is byte orientated |
p6-pdf/PDF-p6…/Writer.pm :295: |
%dict<Length> //= :int($data.codes); |
p6-pdf/PDF-p6…/dao-tie.t :70: |
my UInt $Length = $decoded.codes; |
p6-pdf/PDF-p6…/io-serialize.t :106: |
is $stream<encoded>.codes, 54, 'compressed stream length'; |
p6-pdf/PDF-p6…/io.t :15: |
is $input.codes, $str.codes, "$test .codes"; |
patch/cldr-list-pm6…/README.md :41: |
CLDR](http://patch.codes/talks/localization-with-the-unicode-cldr/) (video and |
patch/cldr-list-pm6…/List.pm :144: |
CLDR|http://patch.codes/talks/localization-with-the-unicode-cldr/> (video and |
patch/geo-region-pm6…/README.md :48: |
Regions and subregions are represented with UN M.49 region codes, such as **419** |
patch/geo-region-pm6…/README.md :53: |
adds two additional two-letter region codes which are supported: **EU** for the |
patch/geo-region-pm6…/README.md :54: |
European Union and **QO** for Outlying Oceania. These region codes are all |
patch/geo-region-pm6…/README.md :59: |
Countries and territories are represented with ISO 3166-1 alpha-2 country codes, |
patch/geo-region-pm6…/README.md :61: |
Unlike with region codes, the three-digit forms of country codes are not |
patch/geo-region-pm6…/README.md :62: |
currently supported, nor are three-letter codes. The deprecated code **UK** for |
patch/geo-region-pm6…/README.md :73: |
codes to be included in the resulting custom region. |
patch/geo-region-pm6…/README.md :118: |
Returns a list of country codes of the countries within the region represented |
patch/geo-region-pm6…/README.md :127: |
- Geo::Region::Enum — Enumerations for UN M.49 and CLDR region codes |
patch/geo-region-pm6…/Region.pm :51: |
# codes excluded from country list due to being deprecated or grouping container |
patch/geo-region-pm6…/Region.pm :166: |
Regions and subregions are represented with UN M.49 region codes, such as B<419> |
patch/geo-region-pm6…/Region.pm :171: |
adds two additional two-letter region codes which are supported: B<EU> for the |
patch/geo-region-pm6…/Region.pm :172: |
European Union and B<QO> for Outlying Oceania. These region codes are all |
patch/geo-region-pm6…/Region.pm :177: |
Countries and territories are represented with ISO 3166-1 alpha-2 country codes, |
patch/geo-region-pm6…/Region.pm :179: |
Unlike with region codes, the three-digit forms of country codes are not |
patch/geo-region-pm6…/Region.pm :180: |
currently supported, nor are three-letter codes. The deprecated code B<UK> for |
patch/geo-region-pm6…/Region.pm :192: |
codes to be included in the resulting custom region. |
patch/geo-region-pm6…/Region.pm :241: |
Returns a list of country codes of the countries within the region represented |
patch/geo-region-pm6…/Region.pm :250: |
=item L<Geo::Region::Enum> — Enumerations for UN M.49 and CLDR region codes |
patch/geo-region-pm6…/Enum.pm :294: |
Geo::Region::Enum - Enumerations for UN M.49 and CLDR region codes |
patch/geo-region-pm6…/Enum.pm :311: |
Exportable constants for region and country codes, designed for use with |
patch/geo-region-pm6…/Enum.pm :319: |
The UN M.49 region codes plus CLDR extensions B<EU> and B<QO>. |
patch/geo-region-pm6…/Enum.pm :359: |
The 249 officially assigned ISO 3166-1 alpha-2 codes. |
patch/geo-region-pm6…/region.t :40: |
# these codes are: 1. deprecated; 2. grouping; and 3. aliases |
perl6-community-modules/p6-irc-utils…/Utils.pm :374: |
Checks if a string contains any embedded color codes. |
perl6-community-modules/p6-irc-utils…/Utils.pm :378: |
Returns C<Bool::True> if C<$string> contains any embedded color codes and |
perl6-community-modules/p6-irc-utils…/Utils.pm :394: |
Checks if a string contains any embedded text formatting codes. |
perl6-community-modules/p6-irc-utils…/Utils.pm :398: |
Returns C<Bool::True> if C<$string> contains any embedded formatting codes and |
perl6-community-modules/p6-irc-utils…/Utils.pm :414: |
Strips a string of all embedded color codes (if any). |
perl6-community-modules/p6-irc-utils…/Utils.pm :418: |
Returns the string given in C<$string> with all embedded color codes removed. |
perl6-community-modules/p6-irc-utils…/Utils.pm :419: |
If the given string does not contain any color codes, the original string is |
perl6-community-modules/p6-irc-utils…/Utils.pm :435: |
Strips a string of all embedded text formatting codes (if any). |
perl6-community-modules/p6-irc-utils…/Utils.pm :439: |
Returns the string given in C<$string> with all embedded text formatting codes |
perl6-community-modules/p6-irc-utils…/Utils.pm :440: |
removed. If the given string does not contain any text formatting codes, the |
perl6-community-modules/p6-irc-utils…/Utils.pm :458: |
The following constants are provided to embed color and formatting codes in IRC |
perl6-community-modules/p6-irc-utils…/Utils.pm :498: |
codes (including colors). |
perl6-community-modules/p6-irc-utils…/Utils.pm :502: |
codes. |
perl6-community-modules/p6-irc-utils…/Utils.pm :546: |
# Associates numeric codes with their string representation |
perl6-community-modules/p6-irc-utils…/Utils.pm :754: |
# Associates string representation with their numeric codes |
perl6-community-modules/p6-irc-utils…/Utils.pm :992: |
# TODO Create rule/regex for matching format codes to reduce duplication |
perl6-community-modules/p6-irc-utils…/Utils.pm :1008: |
# Strip ANSI escape codes |
perl6-community-modules/p6-irc-utils…/Utils.pm :1011: |
# Strip terminating \x0f only if there aren't any formatting codes |
perl6-community-modules/p6-irc-utils…/Utils.pm :1021: |
# Strip terminating \x0f only if there aren't any color codes |
perl6/Perl6-MIME-Base64…/README.md :42: |
Decodes base64 encoded data into a binary buffer. |
perl6/Perl6-MIME-Base64…/README.md :46: |
Encodes `$string` into base64, assuming utf8 encoding. |
perl6/Perl6-MIME-Base64…/README.md :52: |
Decodes `$encoded` into a string, assuming utf8 encoding. |
perl6/doc…/5to6-perlsyn.pod6 :178: |
the vertical bar ("|") is significant in C<< X<> >> codes, and it's not |
perl6/doc…/about.pod6 :138: |
special steps have to be taken to use B<V< X<> >> with other formatting codes; for example: |
perl6/doc…/glossary.pod6 :1053: |
A data structure used to hold a POD string with embedded formatting codes. For example: |
perl6/doc…/pod.pod6 :222: |
without whitespace-squeezing, and without recognizing any inline formatting codes. |
perl6/doc…/pod.pod6 :408: |
Formatting codes provide a way to add inline mark-up to a piece of text. |
perl6/doc…/pod.pod6 :410: |
All Pod formatting codes consist of a single capital letter followed immediately by a set of angle brackets. |
perl6/doc…/pod.pod6 :412: |
Formatting codes may nest other formatting codes. |
perl6/doc…/pragmas.pod6 :95: |
L<nqp opcodes|https://github.com/perl6/nqp/blob/master/docs/ops.markdown\> |
perl6/doc…/traps.pod6 :459: |
If you need the number of codepoints, you should use L«C<.codes>|codes». If you need |
perl6/doc…/traps.pod6 :464: |
say 'ǰ̣'.codes; # OUTPUT: «2» |
perl6/doc…/unicode.pod6 :100: |
Control codes without any official name: |
perl6/doc…/variables.pod6 :1206: |
It is helpful to know our naming conventions in order to understand what codes |
perl6/doc…/Blob.pod6 :18: |
method new(*@codes) |
perl6/doc…/Cool.pod6 :115: |
codes Str |
perl6/doc…/Cool.pod6 :699: |
=head2 routine codes |
perl6/doc…/Cool.pod6 :703: |
sub codes(Str(Cool)) |
perl6/doc…/Cool.pod6 :704: |
method codes() |
perl6/doc…/Cool.pod6 :709: |
say 'møp'.codes; # OUTPUT: «3» |
perl6/doc…/Code.pod6 :17: |
Returns a list of formatting codes that are allowed inside the code block. |
perl6/doc…/Async.pod6 :324: |
Calls method C<gist> on the C<$output>, adds a newline, encodes it as UTF-8, |
perl6/doc…/Str.pod6 :1115: |
L<codes>. |
perl6/doc…/Uni.pod6 :23: |
method new(*@codes --> Uni:D) |
perl6/doc…/Uni.pod6 :51: |
=head2 method codes |
perl6/doc…/Uni.pod6 :53: |
method codes(Uni:D: --> Int:D) |
perl6/doc…/ignored-methods.txt :5: |
Str: codes simplematch BUILD Int Num word-by-word |
perl6/doc…/words.pws :760: |
opcodes |
perl6/doc…/words.pws :1291: |
whatevercodes |
perl6/perl6-http-server-async…/README.md :91: |
Set the status of the response, uses HTTP status codes. See here for more info |
perl6/perl6-http-server-async…/Response.pm6 :18: |
await $.connection.print("HTTP/1.1 $.status {%!statuscodes{$.status}}\r\n"); |
perl6/perl6-http-server…/Response.pm6 :10: |
has %.statuscodes = ( |
perlpilot/p6-Locale-US…/META6.json :6: |
"description" : "Two letter codes for identifying United States territories and vice versa", |
perlpilot/p6-Locale-US…/US.pm :65: |
my @states; my @codes; |
perlpilot/p6-Locale-US…/US.pm :68: |
push @codes, $code; |
perlpilot/p6-Locale-US…/US.pm :77: |
sub all-state-codes() is export { return @codes; } |
perlpilot/p6-Locale-US…/00-locale-us.t :8: |
my @codes = all-state-codes; |
perlpilot/p6-Locale-US…/00-locale-us.t :9: |
ok +@states == +@codes, 'Must be the same number of states and codes'; |
perlpilot/p6-Locale-US…/00-locale-us.t :11: |
# round-tripping states->codes->states works |
rakudo-p5/v5…/TODO_core_modules.md :297: |
[s] Locale::Country - standard codes for country identification |
rakudo-p5/v5…/TODO_core_modules.md :298: |
[s] Locale::Currency - standard codes for currency identification |
rakudo-p5/v5…/TODO_core_modules.md :299: |
[s] Locale::Language - standard codes for language identification |
rakudo-p5/v5…/TODO_core_modules.md :304: |
[s] Locale::Script - standard codes for script identification |
rakudo-p5/v5…/TODO_core_modules.md :388: |
[s] Opcode - Disable named opcodes when compiling perl code |
rakudo-p5/v5…/TODO_core_modules.md :432: |
[s] Pod::Simple::LinkSection - represent "section" attributes of L codes |
rakudo-p5/v5…/core_modules :309: |
#~ Locale::Country - standard codes for country identification |
rakudo-p5/v5…/core_modules :310: |
#~ Locale::Currency - standard codes for currency identification |
rakudo-p5/v5…/core_modules :311: |
#~ Locale::Language - standard codes for language identification |
rakudo-p5/v5…/core_modules :316: |
#~ Locale::Script - standard codes for script identification |
rakudo-p5/v5…/core_modules :394: |
#~ Opcode - Disable named opcodes when compiling perl code |
rakudo-p5/v5…/core_modules :436: |
#~ Pod::Simple::LinkSection - represent "section" attributes of L codes |
retupmoca/P6-Compress-Zlib-Raw…/Raw.pm6 :91: |
# return codes |
retupmoca/p6-Email-Simple…/Simple.pm6 :39: |
my $crlf = $newlines.NFC[^($newlines.<b>codes</b> / 2)]>>.chr.join; |
retupmoca/p6-MIME-QuotedPrint…/README.md :16: |
Encodes `$data` into quoted-printable format, assuming you want utf8 encoding. |
retupmoca/p6-MIME-QuotedPrint…/README.md :24: |
Encodes the binary data in `$data` into quoted-printable format. |
retupmoca/p6-MIME-QuotedPrint…/README.md :31: |
Decodes a quoted-printable encoded string to a utf8 string. |
retupmoca/p6-MIME-QuotedPrint…/README.md :39: |
Decodes a quoted-printable encoded string to a buffer of binary data. |
retupmoca/p6-MIME-QuotedPrint…/QuotedPrint.pm6 :56: |
my @codes; |
retupmoca/p6-MIME-QuotedPrint…/QuotedPrint.pm6 :63: |
@codes.push(0x20); # space |
retupmoca/p6-MIME-QuotedPrint…/QuotedPrint.pm6 :70: |
@codes.push($char.ords[0]); |
retupmoca/p6-MIME-QuotedPrint…/QuotedPrint.pm6 :74: |
if $seq.codes == 3 { |
retupmoca/p6-MIME-QuotedPrint…/QuotedPrint.pm6 :76: |
@codes.push(:16($seq)); |
retupmoca/p6-MIME-QuotedPrint…/QuotedPrint.pm6 :81: |
return Buf.new(@codes); |
robertlemmen/perl6-cucumis-sextus…/cucumis6 :109: |
# XXX we should have different return codes for different cases |
salortiz/DBDish-ODBC…/Native.pm6 :61: |
#/* SQL data type codes */ |
samcv/IRC-TextColor…/TextColor.pm6 :106: |
# This is for when there are multiple codes in one block |
scmorrison/perl6-aws-pricing…/README.md :19: |
aws-pricing service-codes |
scmorrison/perl6-aws-pricing…/README.md :27: |
service-codes List all valid service codes |
scmorrison/perl6-aws-pricing…/README.md :81: |
aws-pricing service-codes |
scmorrison/perl6-aws-pricing…/README.md :115: |
AWS::Pricing::service-codes; |
scmorrison/perl6-aws-pricing…/README.md :139: |
### Valid service codes: |
scmorrison/perl6-aws-pricing…/Pricing.pm6 :6: |
our sub service-codes( |
scmorrison/perl6-aws-pricing…/Pricing.pm6 :25: |
so service-codes() ~~ /^ $code $/; |
scmorrison/perl6-aws-pricing…/Pricing.pm6 :151: |
return "Invalid Service Code. Please use one of the following:\n\n" ~ service-codes().join("\n"); |
scmorrison/perl6-aws-pricing…/CLI.pm6 :14: |
aws-pricing service-codes |
scmorrison/perl6-aws-pricing…/CLI.pm6 :22: |
service-codes List all valid service codes |
scmorrison/perl6-aws-pricing…/CLI.pm6 :82: |
'service-codes' |
scmorrison/perl6-aws-pricing…/CLI.pm6 :86: |
AWS::Pricing::service-codes.map({ .say }); |
scovit/Scheduler-DRMAA…/NativeCall.pm6 :102: |
enum err_codes is export ( |
scovit/Scheduler-DRMAA…/DRMAA.pm6 :180: |
my $codes = ( |
scovit/Scheduler-DRMAA…/DRMAA.pm6 :211: |
return $codes[$num]; |
skids/perl6-Proc-Screen…/Screen.pm6 :15: |
# the screen code hardcodes 80x24 when we start without a display. |
skids/perl6sum…/CRC.pm6 :435: |
Implements an 8-bit CRC used in ATM HEC codes. |
skids/perl6sum…/Marshal.pm6 :23: |
If you would like a version that encodes to UTF8 before calculating |
skids/perl6xproto…/README.md :40: |
method codes { |
skids/perl6xproto…/Protocol.pm6 :1: |
=NAME X::Protocol - Perl6 Exception superclass for protocol result codes |
skids/perl6xproto…/Protocol.pm6 :7: |
# A simple example for a protocol that just has error codes |
skids/perl6xproto…/Protocol.pm6 :35: |
# 1) human-readable strings via a "codes" method |
skids/perl6xproto…/Protocol.pm6 :41: |
method codes { |
skids/perl6xproto…/Protocol.pm6 :73: |
# By default unknown codes produce no human text |
skids/perl6xproto…/Protocol.pm6 :139: |
#| Class method returning a C<Map> of error codes to human readable messages |
skids/perl6xproto…/Protocol.pm6 :140: |
method codes { Map.new() } |
skids/perl6xproto…/Protocol.pm6 :144: |
self.human or self.codes{$.status} or nextsame; |
skids/perl6xproto…/HTTP.pm6 :41: |
method codes { |
skids/perl6xproto…/X11.pm6 :50: |
method codes { |
skids/perl6xproto…/X11.pm6 :76: |
("$.protocol protocol error: {self.codes{self.status}}", |
skids/perl6xproto…/X11.pm6 :85: |
("{self.codes{self.status}}", |
skinkade/p6-crypt-argon2…/argon2.h :85: |
/* Error codes */ |
skinkade/p6-crypt-argon2…/argon2.h :144: |
} argon2_error_codes; |
skinkade/p6-crypt-argon2…/core.h :150: |
* @return ARGON2_OK if everything is all right, otherwise one of error codes |
skinkade/p6-crypt-argon2…/encoding.c :21: |
* -- The second section is specific to Argon2. It encodes and decodes |
skinkade/p6-crypt-argon2…/encoding.c :51: |
* lowercase letters) have consecutive numerical codes, that fit on 8 |
skinkade/p6-crypt-argon2…/encoding.h :27: |
* Decodes an Argon2 hash string into the provided structure 'ctx'. |
skinkade/p6-crypt-argon2…/encoding.h :30: |
* Returned value is ARGON2_OK on success, other ARGON2_ codes on error. |
slobo/Perl6-X11-Xlib-Raw…/keysym.pm6 :55: |
# keysym codes. These 29-bit integer values identify characters or |
softmoth/perl6-pod-to-markdown…/CHANGELOG.md :2: |
* Handle formatting codes in fenced code blocks (Bug #13) |
softmoth/perl6-pod-to-markdown…/formatting.t :27: |
is pod2markdown($=pod), q:to/EOF/, 'Decodes formatted text correctly'; |
spebern/Parser-FreeXL-Native…/configure :8026: |
# Character class describing NM global symbol codes. |
spebern/Parser-FreeXL-Native…/configure :8068: |
# If we're using GNU nm, then use its standard symbol codes. |
spebern/Parser-FreeXL-Native…/configure :10714: |
# Note: this linker hardcodes the directories in LIBPATH if there |
spebern/Parser-FreeXL-Native…/configure :12604: |
# Linking always hardcodes the temporary library directory. |
spebern/Parser-FreeXL-Native…/configure :16387: |
# Linking always hardcodes the temporary library directory. |
spebern/Parser-FreeXL-Native…/configure :19475: |
# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes |
spebern/Parser-FreeXL-Native…/configure :19479: |
# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes |
spebern/Parser-FreeXL-Native…/configure :19485: |
# Set to "yes" if using the -LDIR flag during linking hardcodes DIR |
spebern/Parser-FreeXL-Native…/configure :19489: |
# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR |
spebern/Parser-FreeXL-Native…/configure :19493: |
# Set to "yes" if building a shared library automatically hardcodes DIR |
spebern/Parser-FreeXL-Native…/configure :19821: |
# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes |
spebern/Parser-FreeXL-Native…/configure :19825: |
# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes |
spebern/Parser-FreeXL-Native…/configure :19831: |
# Set to "yes" if using the -LDIR flag during linking hardcodes DIR |
spebern/Parser-FreeXL-Native…/configure :19835: |
# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR |
spebern/Parser-FreeXL-Native…/configure :19839: |
# Set to "yes" if building a shared library automatically hardcodes DIR |
spebern/Parser-FreeXL-Native…/freexl.h :232: |
/* Error codes */ |
spebern/Parser-FreeXL-Native…/libtool.m4 :2029: |
# Linking always hardcodes the temporary library directory. |
spebern/Parser-FreeXL-Native…/libtool.m4 :3573: |
# Character class describing NM global symbol codes. |
spebern/Parser-FreeXL-Native…/libtool.m4 :3615: |
# If we're using GNU nm, then use its standard symbol codes. |
spebern/Parser-FreeXL-Native…/libtool.m4 :4883: |
# Note: this linker hardcodes the directories in LIBPATH if there |
spebern/Parser-FreeXL-Native…/libtool.m4 :5620: |
[Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes |
spebern/Parser-FreeXL-Native…/libtool.m4 :5623: |
[Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes |
spebern/Parser-FreeXL-Native…/libtool.m4 :5628: |
[Set to "yes" if using the -LDIR flag during linking hardcodes DIR |
spebern/Parser-FreeXL-Native…/libtool.m4 :5631: |
[Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR |
spebern/Parser-FreeXL-Native…/libtool.m4 :5634: |
[Set to "yes" if building a shared library automatically hardcodes DIR |
spebern/Parser-FreeXL-Native…/mainpage.doxy :328: |
We will now see how BIFF encodes individual data types with several further |
sufrostico/perl6-snowball…/Snowball.pm6 :66: |
* name of the algorithm, or the 2 or 3 letter ISO 639 codes for the |
supernovus/perl6-fastcgi…/README.md :43: |
codes supported. |
supernovus/perl6-http-status…/Status.pm6 :7: |
## Info from http://en.wikipedia.org/wiki/Http\_status\_codes |
supernovus/perl6-http-status…/Status.pm6 :78: |
## End of defined codes. |
supernovus/perl6-timezone…/southamerica :1380: |
# use links for places with new iso3166 codes. |
sylvarant/Avro…/Avro.pm :3: |
C<Avro> is a minimalistic module that encodes and decodes Avro. |
sylvarant/Avro…/Encode.pm :121: |
unless $schema.size == $str.codes(); |
sylvarant/Avro…/Encode.pm :138: |
my BlobStream $stream = BlobStream.new(:blob(encode_long($str.codes()))); |
sylvarant/Avro…/Encode.pm :139: |
$stream.append( pack(template($str.codes()),$str.ords()) ); |
sylvarant/Avro…/Schema.pm :504: |
$str.codes() == $!size |
tadzik/Terminal-ANSIColor…/example.pl :21: |
say "'$description' encodes to:"; |
thundergnat/Sort-Naturally…/README :45: |
for strings of digits where leading zeros are significant, like zip codes or |
titsuki/p6-Algorithm-LBFGS…/lbfgs.h :561: |
Unlike C codes generated automatically by f2c (Fortran 77 into C converter), |
titsuki/p6-Geo-Hash…/README.md :33: |
Encodes given `$lat` and `$lng` pair with precision of `$precision` and creates a hash value. |
titsuki/p6-Geo-Hash…/README.md :41: |
Decodes given `$hash` and creates a `Geo::Hash::Coord` object. |
titsuki/p6-Geo-Hash…/Hash.pm6 :56: |
Encodes given C<$lat> and C<$lng> pair with precision of C<$precision> and creates a hash value. |
titsuki/p6-Geo-Hash…/Hash.pm6 :64: |
Decodes given C<$hash> and creates a C<Geo::Hash::Coord> object. |
titsuki/p6-Terminal-Readsecret…/readsecret.h :33: |
/* Possible return codes */ |
tony-o/perl6-encoding-huffman-pp6…/PP6.pm6 :263: |
sub huffman-encode(Str $s, %codes = %huffman-http2) is export { |
tony-o/perl6-encoding-huffman-pp6…/PP6.pm6 :264: |
my $bits = $s.comb.map({ %codes{$_}.Str }).join(''); |
tony-o/perl6-encoding-huffman-pp6…/PP6.pm6 :265: |
my Buf[uint8] $enc .=new((0..($bits.codes/8).ceiling).map({ 0 })); |
tony-o/perl6-encoding-huffman-pp6…/PP6.pm6 :267: |
for ($bits.comb, %codes<_eos>.comb).flat -> $c { |
tony-o/perl6-encoding-huffman-pp6…/PP6.pm6 :283: |
sub huffman-decode(Buf[uint8] $s, %codes = %huffman-http2) is export { |
tony-o/perl6-encoding-huffman-pp6…/PP6.pm6 :286: |
my %a = %codes.keys.map({ %codes{$_} => $_; }); |
tony-o/perl6-html-parser-xml…/S05.html :1451: |
m:codes / .**2 / # match two codepoints |
tony-o/perl6-http-server-threaded…/README.md :89: |
Set the status of the response, uses HTTP status codes. See here for more info |
tony-o/perl6-http-server-threaded…/Response.pm6 :17: |
$.connection.print("HTTP/1.1 $.status {%!statuscodes{$.status}}\r\n"); |
ugexe/Perl6-Base64…/README.pod :72: |
decode-base64($decode-me) # Decodes a base64 encoded string to a Buf for further decoding |
ugexe/Perl6-Net--HTTP…/Client.pm6 :7: |
# to (for example) ignore exceptions for certain status codes |
ugexe/Perl6-Net--HTTP…/Response.pm6 :17: |
# Decodes headers to a string, and leaves the body as binary |
ugexe/zef…/Client.pm6 :594: |
# Handle exit codes for various option permutations like --force |
viklund/november…/takahashi.xul :1282: |
var codes = document.getElementById('builtinCode'); |
viklund/november…/takahashi.xul :1288: |
for (var i = 0; i < codes.childNodes.length; i++) { |
viklund/november…/takahashi.xul :1289: |
this.source.value += codes.childNodes[i].nodeValue; |
viklund/november…/takahashi.xul :1295: |
if (codes) |
viklund/november…/takahashi.xul :1296: |
codes.parentNode.removeChild(codes); |
zengargoyle/p6-Algorithm-Trie-libdatrie…/alpha-map.c :22: |
* alpha-map.c - map between character codes and trie alphabet |
zengargoyle/p6-Algorithm-Trie-libdatrie…/alpha-map.c :476: |
* Add a range of character codes from @a begin to @a end to the |
zengargoyle/p6-Algorithm-Trie-libdatrie…/alpha-map.h :22: |
* alpha-map.h - map between character codes and trie alphabet |
zengargoyle/p6-Algorithm-Trie-libdatrie…/trie.h :53: |
* You can define the alphabet set by adding ranges of character codes |
zengargoyle/p6-Algorithm-Trie-libdatrie…/trie.h :57: |
* will map the alphabet characters to raw codes in the range 0..255 |
zengargoyle/p6-Algorithm-Trie-libdatrie…/trie.h :59: |
* but the mapped raw codes will be continuous, for the sake of compactness |
zengargoyle/p6-Algorithm-Trie-libdatrie…/trie_notes.h :17: |
* You can define the alphabet set by adding ranges of character codes |
zengargoyle/p6-Algorithm-Trie-libdatrie…/trie_notes.h :21: |
* will map the alphabet characters to raw codes in the range 0..255 |
zengargoyle/p6-Algorithm-Trie-libdatrie…/trie_notes.h :23: |
* but the mapped raw codes will be continuous, for the sake of compactness |
zoffixznet/perl6-Acme-Advent-Highlighter…/Highlighter.pm6 :30: |
my %codes; |
zoffixznet/perl6-Acme-Advent-Highlighter…/Highlighter.pm6 :33: |
%codes{$id} = %( |
zoffixznet/perl6-Acme-Advent-Highlighter…/Highlighter.pm6 :41: |
%(%codes.map: { .key ~ ".p6" => %( content => .value<code> ) }); |
zoffixznet/perl6-Acme-Advent-Highlighter…/Highlighter.pm6 :42: |
DEBUG "Created gist with all the codes: $gist"; |
zoffixznet/perl6-Acme-Advent-Highlighter…/Highlighter.pm6 :49: |
%codes{ |
zoffixznet/perl6-Benchy…/README.md :46: |
Benches the codes and prints the results. Will print in colour, if |
zoffixznet/perl6-IRC-Client…/02-event-reference.md :66: |
table](https://www.alien.net.au/irc/irc2numerics.html) for meaning of codes, |
zoffixznet/perl6-IRC-Client…/01-main.md :379: |
Returns a list of single-letter codes for currently active channel modes |
zostay/Template-Anti…/Anti.pm6 :387: |
my @codes = gather for $dom.find('script[type="application/anti+perl6"]') -> $script { |
zostay/Template-Anti…/Anti.pm6 :399: |
@codes».(self, $dom, c); |
zostay/Template-Anti…/Anti.pm6 :404: |
@codes».($dom, c); |
CIAvash/App-Football…/README.md :116: |
*LEAGUE_CODES* is in the format of league codes separated with ",", e.g. "PL", "PL,BL1,PD,CL". |
CIAvash/App-Football…/football :119: |
codes separated with ",", |
CIAvash/App-Football…/football :314: |
I<LEAGUE_CODES> is in the format of league codes separated with ",", e.g. "PL", "PL,BL1,PD,CL". |
CIAvash/App-Football…/01-football.t :189: |
}, $all_fixtures_pl_cl, 'Output of All Fixtures with pl & cl league codes is correct'; |
Created
February 16, 2018 01:52
-
-
Save Whateverable/1e0989fb3c4363a07bc5c4a10db195e0 to your computer and use it in GitHub Desktop.
greppable6
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| codes |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment