slp.diff

This adds Service Location Protocol support.

To use this patch, run these commands for a successful build:

    patch -p1 <patches/slp.diff
    ./prepare-source
    ./configure --enable-slp
    make

TODO: the configure changes should abort if the user requests --enable-slp
and we can't honor that request.

based-on: 40afd365cc8ca968fd16e161d24df5b8a8a520cc
diff --git a/Makefile.in b/Makefile.in
--- a/Makefile.in
+++ b/Makefile.in
@@ -13,6 +13,8 @@ CFLAGS=@CFLAGS@
 CPPFLAGS=@CPPFLAGS@
 EXEEXT=@EXEEXT@
 LDFLAGS=@LDFLAGS@
+LIBSLP=@LIBSLP@
+SLPOBJ=@SLPOBJ@
 
 INSTALLCMD=@INSTALL@
 INSTALLMAN=@INSTALL@
@@ -37,7 +39,7 @@ OBJS1=flist.o rsync.o generator.o receiver.o cleanup.o sender.o exclude.o \
 OBJS2=options.o io.o compat.o hlink.o token.o uidlist.o socket.o hashtable.o \
 	fileio.o batch.o clientname.o chmod.o acls.o xattrs.o
 OBJS3=progress.o pipe.o
-DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
+DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o $(SLPOBJ)
 popt_OBJS=popt/findme.o  popt/popt.o  popt/poptconfig.o \
 	popt/popthelp.o popt/poptparse.o
 OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ) @BUILD_POPT@
@@ -73,7 +75,7 @@ install-strip:
 	$(MAKE) INSTALL_STRIP='-s' install
 
 rsync$(EXEEXT): $(OBJS)
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS) $(LIBSLP)
 
 $(OBJS): $(HEADERS)
 $(CHECK_OBJS): $(HEADERS)
diff --git a/clientserver.c b/clientserver.c
--- a/clientserver.c
+++ b/clientserver.c
@@ -1074,6 +1074,13 @@ int daemon_main(void)
 	 * address too.  In fact, why not just do getnameinfo on the
 	 * local address??? */
 
+#ifdef HAVE_LIBSLP
+	if (lp_use_slp() && register_services() != 0) {
+		rprintf(FINFO,
+		    "Couldn't register with service discovery protocol, continuing anyway\n");
+	}
+#endif
+
 	start_accept_loop(rsync_port, start_daemon);
 	return -1;
 }
diff --git a/configure.ac b/configure.ac
--- a/configure.ac
+++ b/configure.ac
@@ -668,6 +668,29 @@ if test $rsync_cv_can_hardlink_special = yes; then
     AC_DEFINE(CAN_HARDLINK_SPECIAL, 1, [Define to 1 if link() can hard-link special files.])
 fi
 
+AC_ARG_ENABLE(slp, [  --disable-slp           turn off SLP support, defaults to on])
+AC_ARG_WITH(openslp-libs, [  --with-openslp-libs     set directory for OpenSLP library],
+    LDFLAGS="-L$withval $LDFLAGS"
+    DSOFLAGS="-L$withval $DSOFLAGS",)
+AC_ARG_WITH(openslp-includes, [  --with-openslp-includes set directory for OpenSLP includes],
+    CFLAGS="-I$withval $CFLAGS"
+    CXXFLAGS="-I$withval $CXXFLAGS"
+    CPPFLAGS="-I$withval $CPPFLAGS",)
+
+LIBSLP=""
+SLPOBJ=""
+
+if test x$enable_slp != xno; then
+    AC_CHECK_HEADER(slp.h,
+        AC_CHECK_LIB(slp, SLPOpen,
+	    AC_DEFINE(HAVE_LIBSLP, 1, [Define to 1 for SLP support])
+	    SLPOBJ="srvreg.o srvloc.o"
+            LIBSLP="-lslp"))
+fi
+
+AC_SUBST(LIBSLP)
+AC_SUBST(SLPOBJ)
+
 AC_CACHE_CHECK([for working socketpair],rsync_cv_HAVE_SOCKETPAIR,[
 AC_TRY_RUN([
 #include <sys/types.h>
diff --git a/loadparm.c b/loadparm.c
--- a/loadparm.c
+++ b/loadparm.c
@@ -109,6 +109,13 @@ typedef struct
 	char *socket_options;
 
 	int rsync_port;
+#ifdef HAVE_LIBSLP
+	int slp_refresh;
+#endif
+
+#ifdef HAVE_LIBSLP
+	BOOL use_slp;
+#endif
 } global;
 
 static global Globals;
@@ -300,7 +307,13 @@ static struct parm_struct parm_table[] =
  {"motd file",         P_STRING, P_GLOBAL,&Globals.motd_file,          NULL,0},
  {"pid file",          P_STRING, P_GLOBAL,&Globals.pid_file,           NULL,0},
  {"port",              P_INTEGER,P_GLOBAL,&Globals.rsync_port,         NULL,0},
+#ifdef HAVE_LIBSLP
+ {"slp refresh",       P_INTEGER,P_GLOBAL,&Globals.slp_refresh,        NULL,0},
+#endif
  {"socket options",    P_STRING, P_GLOBAL,&Globals.socket_options,     NULL,0},
+#ifdef HAVE_LIBSLP
+ {"use slp",           P_BOOL,   P_GLOBAL,&Globals.use_slp,            NULL,0},
+#endif
 
  {"auth users",        P_STRING, P_LOCAL, &sDefault.auth_users,        NULL,0},
  {"charset",           P_STRING, P_LOCAL, &sDefault.charset,           NULL,0},
@@ -354,6 +367,9 @@ static struct parm_struct parm_table[] =
 static void init_globals(void)
 {
 	memset(&Globals, 0, sizeof Globals);
+#ifdef HAVE_LIBSLP
+	Globals.use_slp = True;
+#endif
 }
 
 /***************************************************************************
@@ -394,6 +410,13 @@ FN_GLOBAL_STRING(lp_pid_file, &Globals.pid_file)
 FN_GLOBAL_STRING(lp_socket_options, &Globals.socket_options)
 
 FN_GLOBAL_INTEGER(lp_rsync_port, &Globals.rsync_port)
+#ifdef HAVE_LIBSLP
+FN_GLOBAL_INTEGER(lp_slp_refresh, &Globals.slp_refresh)
+#endif
+
+#ifdef HAVE_LIBSLP
+FN_GLOBAL_BOOL(lp_use_slp, &Globals.use_slp)
+#endif
 
 FN_LOCAL_STRING(lp_auth_users, auth_users)
 FN_LOCAL_STRING(lp_charset, charset)
diff --git a/main.c b/main.c
--- a/main.c
+++ b/main.c
@@ -1133,6 +1133,18 @@ static int start_client(int argc, char *argv[])
 
 	if (!read_batch) { /* for read_batch, NO source is specified */
 		char *path = check_for_hostspec(argv[0], &shell_machine, &rsync_port);
+
+		if (shell_machine && !shell_machine[0]) {
+#ifdef HAVE_LIBSLP
+			/* User entered just rsync:// URI */
+			print_service_list();
+			exit_cleanup(0);
+#else /* No SLP, die here */
+			rprintf(FINFO, "No SLP support, cannot browse\n");
+			exit_cleanup(RERR_SYNTAX);
+#endif
+		}
+
 		if (path) { /* source is remote */
 			char *dummy_host;
 			int dummy_port = 0;
diff --git a/options.c b/options.c
--- a/options.c
+++ b/options.c
@@ -223,6 +223,7 @@ static void print_rsync_version(enum logcode f)
 	char const *links = "no ";
 	char const *iconv = "no ";
 	char const *ipv6 = "no ";
+	char const *slp = "no ";
 	STRUCT_STAT *dumstat;
 
 #if SUBPROTOCOL_VERSION != 0
@@ -256,6 +257,9 @@ static void print_rsync_version(enum logcode f)
 #ifdef CAN_SET_SYMLINK_TIMES
 	symtimes = "";
 #endif
+#if HAVE_LIBSLP
+	slp = "";
+#endif
 
 	rprintf(f, "%s  version %s  protocol version %d%s\n",
 		RSYNC_NAME, RSYNC_VERSION, PROTOCOL_VERSION, subprotocol);
@@ -269,8 +273,8 @@ static void print_rsync_version(enum logcode f)
 		(int)(sizeof (int64) * 8));
 	rprintf(f, "    %ssocketpairs, %shardlinks, %ssymlinks, %sIPv6, batchfiles, %sinplace,\n",
 		got_socketpair, hardlinks, links, ipv6, have_inplace);
-	rprintf(f, "    %sappend, %sACLs, %sxattrs, %siconv, %ssymtimes\n",
-		have_inplace, acls, xattrs, iconv, symtimes);
+	rprintf(f, "    %sappend, %sACLs, %sxattrs, %siconv, %ssymtimes, %sSLP\n",
+		have_inplace, acls, xattrs, iconv, symtimes, slp);
 
 #ifdef MAINTAINER_MODE
 	rprintf(f, "Panic Action: \"%s\"\n", get_panic_action());
diff --git a/rsync.h b/rsync.h
--- a/rsync.h
+++ b/rsync.h
@@ -199,6 +199,10 @@
 #define SIGNIFICANT_ITEM_FLAGS (~(\
 	ITEM_BASIS_TYPE_FOLLOWS | ITEM_XNAME_FOLLOWS | ITEM_LOCAL_CHANGE))
 
+/* this is the minimum we'll use, irrespective of config setting */
+/* definately don't set to less than about 30 seconds */
+#define SLP_MIN_TIMEOUT 120
+
 #define CFN_KEEP_DOT_DIRS (1<<0)
 #define CFN_KEEP_TRAILING_SLASH (1<<1)
 #define CFN_DROP_TRAILING_DOT_DIR (1<<2)
diff --git a/rsync.yo b/rsync.yo
--- a/rsync.yo
+++ b/rsync.yo
@@ -148,7 +148,12 @@ particular rsync daemon by leaving off the module name:
 
 quote(tt(rsync somehost.mydomain.com::))
 
-See the following section for more details.
+And, if Service Location Protocol is available, the following will list the
+available rsync servers:
+
+quote(tt(rsync rsync://))
+
+See the following section for even more usage details.
 
 manpagesection(ADVANCED USAGE)
 
diff --git a/rsyncd.conf b/rsyncd.conf
new file mode 100644
--- /dev/null
+++ b/rsyncd.conf
@@ -0,0 +1,3 @@
+
+slp refresh = 300
+
diff --git a/rsyncd.conf.yo b/rsyncd.conf.yo
--- a/rsyncd.conf.yo
+++ b/rsyncd.conf.yo
@@ -104,6 +104,19 @@ details on some of the options you may be able to set. By default no
 special socket options are set.  These settings can also be specified
 via the bf(--sockopts) command-line option.
 
+dit(bf(use slp)) This parameter is used to determine if the module names are
+advertised via slp.  The default is for this to be enabled, which will
+advertise your public modules.
+
+dit(bf(slp refresh)) This parameter is used to determine how long service
+advertisements are valid (measured in seconds), and is only applicable if
+you have Service Location Protocol support compiled in. If this is
+not set or is set to zero, then service advertisements never timeout. If
+this is set to less than 120 seconds, then 120 seconds is used. If it is
+set to more than 65535, then 65535 is used (which is a limitation of SLP).
+Using 3600 (one hour) is a good number if you tend to change your
+configuration.
+
 enddit()
 
 manpagesection(MODULE PARAMETERS)
@@ -658,6 +671,7 @@ use chroot = yes
 max connections = 4
 syslog facility = local5
 pid file = /var/run/rsyncd.pid
+slp refresh = 3600
 
 [ftp]
         path = /var/ftp/./pub
diff --git a/socket.c b/socket.c
--- a/socket.c
+++ b/socket.c
@@ -544,6 +544,16 @@ void start_accept_loop(int port, int (*fn)(int, int))
 {
 	fd_set deffds;
 	int *sp, maxfd, i;
+#ifdef HAVE_LIBSLP
+	time_t next_slp_refresh;
+	short slp_timeout = lp_use_slp() ? lp_slp_refresh() : 0;
+	if (slp_timeout) {
+		if (slp_timeout < SLP_MIN_TIMEOUT)
+			slp_timeout = SLP_MIN_TIMEOUT;
+		/* re-register before slp times out */
+		slp_timeout -= 15;
+	}
+#endif
 
 #ifdef HAVE_SIGACTION
 	sigact.sa_flags = SA_NOCLDSTOP;
@@ -572,14 +582,25 @@ void start_accept_loop(int port, int (*fn)(int, int))
 			maxfd = sp[i];
 	}
 
+#ifdef HAVE_LIBSLP
+	next_slp_refresh = time(NULL) + slp_timeout;
+#endif
+
 	/* now accept incoming connections - forking a new process
 	 * for each incoming connection */
 	while (1) {
 		fd_set fds;
 		pid_t pid;
 		int fd;
+		int sel_ret;
 		struct sockaddr_storage addr;
 		socklen_t addrlen = sizeof addr;
+#ifdef HAVE_LIBSLP
+		struct timeval slp_tv;
+
+		slp_tv.tv_sec = 10;
+		slp_tv.tv_usec = 0;
+#endif
 
 		/* close log file before the potentially very long select so
 		 * file can be trimmed by another process instead of growing
@@ -592,7 +613,18 @@ void start_accept_loop(int port, int (*fn)(int, int))
 		fds = deffds;
 #endif
 
-		if (select(maxfd + 1, &fds, NULL, NULL, NULL) < 1)
+#ifdef HAVE_LIBSLP
+		sel_ret = select(maxfd + 1, &fds, NULL, NULL,
+				 slp_timeout ? &slp_tv : NULL);
+		if (sel_ret == 0 && slp_timeout && time(NULL) > next_slp_refresh) {
+		    rprintf(FINFO, "Service registration expired, refreshing it\n");
+		    register_services();
+		    next_slp_refresh = time(NULL) + slp_timeout;
+		}
+#else
+		sel_ret = select(maxfd + 1, &fds, NULL, NULL, NULL);
+#endif
+		if (sel_ret < 1)
 			continue;
 
 		for (i = 0, fd = -1; sp[i] >= 0; i++) {
diff --git a/srvloc.c b/srvloc.c
new file mode 100644
--- /dev/null
+++ b/srvloc.c
@@ -0,0 +1,103 @@
+/* -*- c-file-style: "linux"; -*-
+
+   Copyright (C) 2002 by Brad Hards <bradh@frogmouth.net>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* This file implements the service location functionality */
+/* Basically, it uses normal Service Location Protocol API */
+
+/* It is really a cheap hack - just to show how it might work
+   in a real application.
+*/
+
+#include "rsync.h"
+
+#include <slp.h>
+#include <stdio.h>
+#include <string.h>
+
+/* This one just prints out the attributes */
+static SLPBoolean getAttrCallback(UNUSED(SLPHandle hslp), const char *attrlist,
+				  SLPError errcode, UNUSED(void *cookie))
+{
+	char *cleanstr;
+
+	if (errcode == SLP_OK) {
+		if (!strcmp(attrlist, "(comment=)"))
+			rprintf(FINFO, "\t(No description)\n");
+		else {
+			cleanstr = strrchr(attrlist, ')') ;
+			*cleanstr = ' '; /* remove last ')' */
+			rprintf(FINFO, "\t%s\n", strchr(attrlist, '=') + 1);
+		}
+	}
+	return SLP_FALSE;
+}
+
+static SLPBoolean getSLPSrvURLCallback(UNUSED(SLPHandle hslp),
+			const char *srvurl, UNUSED(unsigned short lifetime),
+			SLPError errcode, void *cookie)
+{
+	SLPError    result;
+	SLPHandle   attrhslp;
+
+	if (errcode == SLP_OK) {
+		/* chop service: off the front */
+		rprintf(FINFO, "  %s  ", (strchr(srvurl, ':') + 1));
+		/* check for any attributes */
+		if (SLPOpen("en", SLP_FALSE,&attrhslp) == SLP_OK) {
+			result = SLPFindAttrs(attrhslp, srvurl,
+					      "", /* return all attributes */
+					      "", /* use configured scopes */
+					      getAttrCallback, NULL);
+			if (result != SLP_OK) {
+				rprintf(FERROR, "errorcode: %i\n",result);
+			}
+			SLPClose(attrhslp);
+		}
+		*(SLPError*)cookie = SLP_OK;
+	} else
+		*(SLPError*)cookie = errcode;
+
+	/* Return SLP_TRUE because we want to be called again
+	 * if more services were found. */
+
+	return SLP_TRUE;
+}
+
+int print_service_list(void)
+{
+	SLPError err;
+	SLPError callbackerr;
+	SLPHandle hslp;
+
+	err = SLPOpen("en",SLP_FALSE,&hslp);
+	if (err != SLP_OK) {
+		rprintf(FERROR, "Error opening slp handle %i\n", err);
+		return err;
+	}
+
+	SLPFindSrvs(hslp, "rsync",
+		    0, /* use configured scopes */
+		    0, /* no attr filter        */
+		    getSLPSrvURLCallback, &callbackerr);
+
+	/* Now that we're done using slp, close the slp handle */
+	SLPClose(hslp);
+
+	return 0;
+}
diff --git a/srvreg.c b/srvreg.c
new file mode 100644
--- /dev/null
+++ b/srvreg.c
@@ -0,0 +1,128 @@
+/* -*- c-file-style: "linux"; -*-
+
+   Copyright (C) 2002 by Brad Hards <bradh@frogmouth.net>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* This file implements the service registration functionality */
+
+/* Basically, it uses normal Service Location Protocol API */
+
+#include "rsync.h"
+#include "slp.h"
+#include "netdb.h"
+
+extern int rsync_port;
+
+static void slp_callback(UNUSED(SLPHandle hslp), SLPError errcode, void *cookie)
+{
+	/* return the error code in the cookie */
+	*(SLPError*)cookie = errcode;
+
+	/* You could do something else here like print out
+	 * the errcode, etc.  Remember, as a general rule,
+	 * do not try to do too much in a callback because
+	 * it is being executed by the same thread that is
+	 * reading slp packets from the wire. */
+}
+
+int register_services(void)
+{
+	SLPError err, callbackerr;
+	SLPHandle hslp;
+	int n;
+	int i;
+	char srv[120];
+	char attr[120];
+	char localhost[256];
+	extern char *config_file;
+	short timeout;
+	struct addrinfo aih, *ai = 0;
+
+	if (!lp_load(config_file, 0)) {
+		exit_cleanup(RERR_SYNTAX);
+	}
+
+	n = lp_numservices();
+
+	if (0 == lp_slp_refresh())
+		timeout = SLP_LIFETIME_MAXIMUM; /* don't expire, ever */
+	else if (SLP_MIN_TIMEOUT > lp_slp_refresh())
+		timeout = SLP_MIN_TIMEOUT; /* use a reasonable minimum */
+	else if (SLP_LIFETIME_MAXIMUM <= lp_slp_refresh())
+		timeout = (SLP_LIFETIME_MAXIMUM - 1); /* as long as possible */
+	else
+		timeout = lp_slp_refresh();
+
+	rprintf(FINFO, "rsyncd registering %d service%s with slpd for %d seconds:\n", n, ((n==1)? "":"s"), timeout);
+	err = SLPOpen("en",SLP_FALSE,&hslp);
+	if (err != SLP_OK) {
+		rprintf(FINFO, "Error opening slp handle %i\n",err);
+		return err;
+	}
+	if (gethostname(localhost, sizeof localhost)) {
+	       rprintf(FINFO, "Could not get hostname: %s\n", strerror(errno));
+	       return err;
+	}
+	memset(&aih, 0, sizeof aih);
+	aih.ai_family = PF_UNSPEC;
+	aih.ai_flags = AI_CANONNAME;
+	if (0 != (err = getaddrinfo(localhost, 0, &aih, &ai)) || !ai) {
+	       rprintf(FINFO, "Could not resolve hostname: %s\n", gai_strerror(err));
+	       return err;
+	}
+	/* Register each service with SLP */
+	for (i = 0; i < n; i++) {
+		if (!lp_list(i))
+			continue;
+
+		snprintf(srv, sizeof srv, "service:rsync://%s:%d/%s",
+			 ai->ai_canonname,
+			 rsync_port,
+			 lp_name(i));
+		rprintf(FINFO, "    %s\n", srv);
+		if (lp_comment(i)) {
+			snprintf(attr, sizeof attr, "(comment=%s)",
+				 lp_comment(i));
+		}
+		err = SLPReg(hslp,
+			     srv, /* service to register */
+			     timeout,
+			     0,  /* this is ignored */
+			     attr, /* attributes */
+			     SLP_TRUE, /* new registration - don't change this */
+			     slp_callback, /* callback */
+			     &callbackerr);
+
+		/* err may contain an error code that occurred as the slp library
+		 * _prepared_ to make the call. */
+		if (err != SLP_OK || callbackerr != SLP_OK)
+			rprintf(FINFO, "Error registering service with slp %i\n", err);
+
+		/* callbackerr may contain an error code (that was assigned through
+		 * the callback cookie) that occurred as slp packets were sent on
+		 * the wire. */
+		if (callbackerr != SLP_OK)
+			rprintf(FINFO, "Error registering service with slp %i\n",callbackerr);
+	}
+
+	/* Now that we're done using slp, close the slp handle */
+	freeaddrinfo(ai);
+	SLPClose(hslp);
+
+	/* refresh is done in main select loop */
+	return 0;
+}
diff -up a/config.h.in b/config.h.in
--- a/config.h.in
+++ b/config.h.in
@@ -197,6 +197,9 @@
 /* Define to 1 if you have the `sec' library (-lsec). */
 #undef HAVE_LIBSEC
 
+/* Define to 1 for SLP support */
+#undef HAVE_LIBSLP
+
 /* Define to 1 if you have the `socket' library (-lsocket). */
 #undef HAVE_LIBSOCKET
 
diff -up a/configure.sh b/configure.sh
--- a/configure.sh
+++ b/configure.sh
@@ -606,6 +606,8 @@ BUILD_POPT
 CC_SHOBJ_FLAG
 OBJ_RESTORE
 OBJ_SAVE
+SLPOBJ
+LIBSLP
 ALLOCA
 LIBOBJS
 HAVE_YODL2MAN
@@ -686,6 +688,9 @@ enable_ipv6
 enable_locale
 enable_iconv_open
 enable_iconv
+enable_slp
+with_openslp_libs
+with_openslp_includes
 enable_acl_support
 enable_xattr_support
 '
@@ -1320,6 +1325,7 @@ Optional Features:
   --disable-locale        disable locale features
   --disable-iconv-open    disable all use of iconv_open() function
   --disable-iconv         disable rsync's --iconv option
+  --disable-slp           turn off SLP support, defaults to on
   --disable-acl-support   disable ACL support
   --disable-xattr-support disable extended attributes
 
@@ -1334,6 +1340,8 @@ Optional Packages:
   --with-nobody-group=GROUP
                           set the default unprivileged group (default nobody
                           or nogroup)
+  --with-openslp-libs     set directory for OpenSLP library
+  --with-openslp-includes set directory for OpenSLP includes
 
 Some influential environment variables:
   CC          C compiler command
@@ -7685,6 +7693,85 @@ $as_echo "#define CAN_HARDLINK_SPECIAL 1
 
 fi
 
+# Check whether --enable-slp was given.
+if test "${enable_slp+set}" = set; then :
+  enableval=$enable_slp;
+fi
+
+
+# Check whether --with-openslp-libs was given.
+if test "${with_openslp_libs+set}" = set; then :
+  withval=$with_openslp_libs; LDFLAGS="-L$withval $LDFLAGS"
+    DSOFLAGS="-L$withval $DSOFLAGS"
+fi
+
+
+# Check whether --with-openslp-includes was given.
+if test "${with_openslp_includes+set}" = set; then :
+  withval=$with_openslp_includes; CFLAGS="-I$withval $CFLAGS"
+    CXXFLAGS="-I$withval $CXXFLAGS"
+    CPPFLAGS="-I$withval $CPPFLAGS"
+fi
+
+
+LIBSLP=""
+SLPOBJ=""
+
+if test x$enable_slp != xno; then
+    ac_fn_c_check_header_mongrel "$LINENO" "slp.h" "ac_cv_header_slp_h" "$ac_includes_default"
+if test "x$ac_cv_header_slp_h" = xyes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SLPOpen in -lslp" >&5
+$as_echo_n "checking for SLPOpen in -lslp... " >&6; }
+if ${ac_cv_lib_slp_SLPOpen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lslp  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char SLPOpen ();
+int
+main ()
+{
+return SLPOpen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_slp_SLPOpen=yes
+else
+  ac_cv_lib_slp_SLPOpen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_slp_SLPOpen" >&5
+$as_echo "$ac_cv_lib_slp_SLPOpen" >&6; }
+if test "x$ac_cv_lib_slp_SLPOpen" = xyes; then :
+
+$as_echo "#define HAVE_LIBSLP 1" >>confdefs.h
+
+	    SLPOBJ="srvreg.o srvloc.o"
+            LIBSLP="-lslp"
+fi
+
+fi
+
+
+fi
+
+
+
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working socketpair" >&5
 $as_echo_n "checking for working socketpair... " >&6; }
 if ${rsync_cv_HAVE_SOCKETPAIR+:} false; then :
diff -up a/proto.h b/proto.h
--- a/proto.h
+++ b/proto.h
@@ -183,6 +183,8 @@ char *lp_motd_file(void);
 char *lp_pid_file(void);
 char *lp_socket_options(void);
 int lp_rsync_port(void);
+int lp_slp_refresh(void);
+BOOL lp_use_slp(void);
 char *lp_auth_users(int module_id);
 char *lp_charset(int module_id);
 char *lp_comment(int module_id);
@@ -294,6 +296,8 @@ int open_socket_out_wrapped(char *host,
 int is_a_socket(int fd);
 void start_accept_loop(int port, int (*fn)(int, int));
 void set_socket_options(int fd, char *options);
+int print_service_list(void);
+int register_services(void);
 int do_unlink(const char *fname);
 int do_symlink(const char *fname1, const char *fname2);
 int do_link(const char *fname1, const char *fname2);
diff -up a/rsync.1 b/rsync.1
--- a/rsync.1
+++ b/rsync.1
@@ -180,7 +180,15 @@ particular rsync daemon by leaving off t
 .RE
 
 .PP 
-See the following section for more details.
+And, if Service Location Protocol is available, the following will list the
+available rsync servers:
+.PP 
+.RS 
+\f(CWrsync rsync://\fP
+.RE
+
+.PP 
+See the following section for even more usage details.
 .PP 
 .SH "ADVANCED USAGE"
 
diff -up a/rsyncd.conf.5 b/rsyncd.conf.5
--- a/rsyncd.conf.5
+++ b/rsyncd.conf.5
@@ -121,6 +121,21 @@ details on some of the options you may b
 special socket options are set.  These settings can also be specified
 via the \fB\-\-sockopts\fP command\-line option.
 .IP 
+.IP "\fBuse slp\fP"
+This parameter is used to determine if the module names are
+advertised via slp.  The default is for this to be enabled, which will
+advertise your public modules.
+.IP 
+.IP "\fBslp refresh\fP"
+This parameter is used to determine how long service
+advertisements are valid (measured in seconds), and is only applicable if
+you have Service Location Protocol support compiled in. If this is
+not set or is set to zero, then service advertisements never timeout. If
+this is set to less than 120 seconds, then 120 seconds is used. If it is
+set to more than 65535, then 65535 is used (which is a limitation of SLP).
+Using 3600 (one hour) is a good number if you tend to change your
+configuration.
+.IP 
 .SH "MODULE PARAMETERS"
 
 .PP 
@@ -770,6 +785,7 @@ use chroot = yes
 max connections = 4
 syslog facility = local5
 pid file = /var/run/rsyncd.pid
+slp refresh = 3600
 
 [ftp]
         path = /var/ftp/./pub