Created
May 1, 2012 13:47
-
-
Save mwisnicki/2568016 to your computer and use it in GitHub Desktop.
Boot log for pfSense-2.0.1 (FreeBSD-8.1R-p6) on Intel D2500CC
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
OK boot -d -v -s | |
KDB: debugger backends: ddb | |
KDB: current backend: ddb | |
KDB: enter: Boot flags requested debugger | |
[thread pid 0 tid 0 ] | |
Stopped at kdb_enter+0x3d: movq $0,0xa4b500(%rip) | |
db> c | |
SMAP type=01 base=0000000000000000 len=000000000008f000 | |
SMAP type=02 base=000000000008f000 len=0000000000001000 | |
SMAP type=01 base=0000000000090000 len=000000000000e800 | |
SMAP type=02 base=000000000009e800 len=0000000000001800 | |
SMAP type=02 base=00000000000e0000 len=0000000000020000 | |
SMAP type=01 base=0000000000100000 len=00000000ced98000 | |
SMAP type=02 base=00000000cee98000 len=0000000000027000 | |
SMAP type=01 base=00000000ceebf000 len=000000000004e000 | |
SMAP type=04 base=00000000cef0d000 len=00000000000b2000 | |
SMAP type=01 base=00000000cefbf000 len=0000000000032000 | |
SMAP type=03 base=00000000ceff1000 len=000000000000e000 | |
SMAP type=01 base=00000000cefff000 len=0000000000001000 | |
SMAP type=02 base=00000000cf000000 len=0000000000400000 | |
SMAP type=02 base=00000000cf400000 len=0000000000200000 | |
SMAP type=02 base=00000000cf600000 len=0000000000200000 | |
SMAP type=02 base=00000000cf800000 len=0000000000800000 | |
SMAP type=02 base=00000000e0000000 len=0000000004000000 | |
SMAP type=02 base=00000000ffe00000 len=0000000000200000 | |
SMAP type=01 base=0000000100000000 len=0000000030000000 | |
Copyright (c) 1992-2010 The FreeBSD Project. | |
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
The Regents of the University of California. All rights reserved. | |
FreeBSD is a registered trademark of The FreeBSD Foundation. | |
FreeBSD 8.1-RELEASE-p6 #0: Mon Dec 12 18:15:35 EST 2011 | |
root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64 | |
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81405000. | |
Timecounter "i8254" frequency 1193182 Hz quality 0 | |
Calibrating TSC clock ... TSC clock: 1887276552 Hz | |
CPU: Intel(R) Atom(TM) CPU D2500 @ 1.86GHz (1887.28-MHz K8-class CPU) | |
Origin = "GenuineIntel" Id = 0x30661 Family = 6 Model = 36 Stepping = 1 | |
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> | |
Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> | |
AMD Features=0x20100800<SYSCALL,NX,LM> | |
AMD Features2=0x1<LAHF> | |
TSC: P-state invariant | |
real memory = 4294967296 (4096 MB) | |
Physical memory chunk(s): | |
0x0000000000001000 - 0x000000000008afff, 565248 bytes (138 pages) | |
0x0000000000090000 - 0x000000000009dfff, 57344 bytes (14 pages) | |
0x0000000001434000 - 0x00000000c5f9bfff, 3300294656 bytes (805736 pages) | |
0x00000000ceebf000 - 0x00000000cef0cfff, 319488 bytes (78 pages) | |
0x00000000cefbf000 - 0x00000000ceff0fff, 204800 bytes (50 pages) | |
0x00000000cefff000 - 0x00000000ceffffff, 4096 bytes (1 pages) | |
0x0000000100000000 - 0x000000012ffeffff, 805240832 bytes (196592 pages) | |
avail memory = 4083478528 (3894 MB) | |
ACPI APIC Table: <INTEL D2500CC > | |
INTR: Adding local APIC 1 as a target | |
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs | |
FreeBSD/SMP: 1 package(s) x 2 core(s) | |
cpu0 (BSP): APIC ID: 0 | |
cpu1 (AP): APIC ID: 1 | |
APIC: CPU 0 has ACPI ID 1 | |
APIC: CPU 1 has ACPI ID 2 | |
x86bios: IVT 0x000000-0x0004ff at 0xffffff0000000000 | |
x86bios: SSEG 0x010000-0x01ffff at 0xffffff800001a000 | |
x86bios: EBDA 0x09e000-0x09ffff at 0xffffff000009e000 | |
x86bios: ROM 0x0a0000-0x0effff at 0xffffff00000a0000 | |
ULE: setup cpu 0 | |
ULE: setup cpu 1 | |
ACPI: RSDP 0xf2240 00024 (v2 INTEL ) | |
ACPI: XSDT 0xceffe120 0004C (v1 INTEL D2500CC 00000020 01000013) | |
ACPI: FACP 0xceff5000 000F4 (v3 INTEL D2500CC 00000020 MSFT 0100000D) | |
ACPI: DSDT 0xceff7000 06829 (v2 INTEL D2500CC 00000020 MSFT 0100000D) | |
ACPI: FACS 0xcef95000 00040 | |
ACPI: SSDT 0xceff6000 0043E (v1 INTEL D2500CC 00000020 MSFT 0100000D) | |
ACPI: APIC 0xceff4000 00084 (v2 INTEL D2500CC 00000020 MSFT 0100000D) | |
ACPI: MCFG 0xceff3000 0003C (v1 INTEL D2500CC 00000020 MSFT 0100000D) | |
ACPI: HPET 0xceff2000 00038 (v1 INTEL D2500CC 00000020 MSFT 0100000D) | |
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 | |
ioapic0: Changing APIC ID to 8 | |
ioapic0: Routing external 8259A's -> intpin 0 | |
MADT: Interrupt override: source 0, irq 2 | |
ioapic0: Routing IRQ 0 -> intpin 2 | |
MADT: Interrupt override: source 9, irq 9 | |
ioapic0: intpin 9 trigger: level | |
lapic0: Routing NMI -> LINT1 | |
lapic0: LINT1 trigger: level | |
lapic0: LINT1 polarity: high | |
lapic1: Routing NMI -> LINT1 | |
lapic1: LINT1 trigger: level | |
lapic1: LINT1 polarity: high | |
MADT: Ignoring local NMI routed to ACPI CPU 3 | |
MADT: Ignoring local NMI routed to ACPI CPU 4 | |
ioapic0 <Version 2.0> irqs 0-23 on motherboard | |
lapic0: Forcing LINT1 to edge trigger | |
cpu0 BSP: | |
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff | |
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff | |
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 | |
netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling | |
firmware: 'mxge_rss_ethp_z8e' version 563868: 155786 bytes loaded at 0xffffffff81000440 | |
wlan: mac acl policy registered | |
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. | |
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. | |
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80470e10, 0) error 1 | |
firmware: 'rt2561fw' version 0: 8192 bytes loaded at 0xffffffff8102c6e4 | |
firmware: 'rt2561sfw' version 0: 8192 bytes loaded at 0xffffffff8102e7c4 | |
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/. | |
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf. | |
module_register_init: MOD_LOAD (wpi_fw, 0xffffffff806548d0, 0) error 1 | |
firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0xffffffff810308a4 | |
firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0xffffffff81032984 | |
firmware: 'iwn1000fw' version 0: 335056 bytes loaded at 0xffffffff80de6a84 | |
wlan: <802.11 Link Layer> | |
firmware: 'iwn4965fw' version 0: 187972 bytes loaded at 0xffffffff80e38834 | |
firmware: 'iwn5000fw' version 0: 353240 bytes loaded at 0xffffffff80e66754 | |
firmware: 'iwn5150fw' version 0: 337400 bytes loaded at 0xffffffff80ebcc04 | |
firmware: 'iwn6000fw' version 0: 462280 bytes loaded at 0xffffffff80f0f2d4 | |
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. | |
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. | |
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80470cd0, 0) error 1 | |
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. | |
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. | |
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80470d70, 0) error 1 | |
firmware: 'mw88W8363fw' version 0: 94940 bytes loaded at 0xffffffff80f89684 | |
firmware: 'mwlboot' version 0: 2280 bytes loaded at 0xffffffff80fa0960 | |
firmware: 'mxge_eth_z8e' version 367564: 116477 bytes loaded at 0xffffffff80fa1540 | |
firmware: 'mxge_ethp_z8e' version 377876: 117102 bytes loaded at 0xffffffff80fbdd20 | |
firmware: 'mxge_rss_eth_z8e' version 553468: 154580 bytes loaded at 0xffffffff80fda780 | |
kbd: new array size 4 | |
kbd1 at kbdmux0 | |
mem: <memory> | |
nfslock: pseudo-device | |
crypto: <crypto core> | |
null: <null device, zero device> | |
random: <entropy source, Software, Yarrow> | |
io: <I/O> | |
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 | |
cryptosoft0: <software crypto> on motherboard | |
crypto: assign cryptosoft0 driver id 0, flags 100663296 | |
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 | |
padlock0: No ACE support. | |
acpi0: <INTEL D2500CC> on motherboard | |
PCIe: Memory Mapped configuration base @ 0xe0000000 | |
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 | |
acpi0: [MPSAFE] | |
acpi0: [ITHREAD] | |
ACPI: Executed 1 blocks of module-level executable AML code | |
acpi0: Power Button (fixed) | |
acpi0: wakeup code va 0xffffff800000f000 pa 0x4000 | |
AcpiOsDerivePciId: \_SB_.PCI0.CDVC.HBUS -> bus 0 dev 0 func 0 | |
AcpiOsDerivePciId: \_SB_.PCI0.GFX0.IGDP -> bus 0 dev 2 func 0 | |
AcpiOsDerivePciId: \_SB_.PCI0.LPCB.LPC0 -> bus 0 dev 31 func 0 | |
AcpiOsDerivePciId: \_SB_.PCI0.LPCB.LPC1 -> bus 0 dev 31 func 0 | |
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 | |
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit | |
Timecounter "HPET" frequency 14318180 Hz quality 900 | |
acpi0: reservation of 0, 4000 (3) failed | |
ACPI timer: 0/6 0/6 0/6 0/6 0/6 0/7 0/6 0/6 0/6 0/6 -> 0 | |
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 | |
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 | |
cpu0: <ACPI CPU> on acpi0 | |
cpu0: switching to generic Cx mode | |
cpu1: <ACPI CPU> on acpi0 | |
pci_link0: Index IRQ Rtd Ref IRQs | |
Initial Probe 0 11 N 0 1 3 4 5 6 7 10 12 14 15 | |
Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 | |
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 | |
pci_link1: Index IRQ Rtd Ref IRQs | |
Initial Probe 0 255 N 0 1 3 4 5 6 7 11 12 14 15 | |
Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 | |
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 | |
pci_link2: Index IRQ Rtd Ref IRQs | |
Initial Probe 0 9 N 0 1 3 4 5 6 7 10 12 14 15 | |
Validation 0 9 N 0 1 3 4 5 6 7 10 12 14 15 | |
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 | |
pci_link3: Index IRQ Rtd Ref IRQs | |
Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15 | |
Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15 | |
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 | |
pci_link4: Index IRQ Rtd Ref IRQs | |
Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15 | |
Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15 | |
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 | |
pci_link5: Index IRQ Rtd Ref IRQs | |
Initial Probe 0 255 N 0 1 3 4 5 6 7 11 12 14 15 | |
Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 | |
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 | |
pci_link6: Index IRQ Rtd Ref IRQs | |
Initial Probe 0 9 N 0 1 3 4 5 6 7 10 12 14 15 | |
Validation 0 9 N 0 1 3 4 5 6 7 10 12 14 15 | |
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 | |
pci_link7: Index IRQ Rtd Ref IRQs | |
Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15 | |
Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 | |
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 | |
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 | |
pci0: <ACPI PCI bus> on pcib0 | |
pci0: domain=0, physical bus=0 | |
found-> vendor=0x8086, dev=0x0bf5, revid=0x03 | |
domain=0, bus=0, slot=0, func=0 | |
class=06-00-00, hdrtype=0x00, mfdev=0 | |
cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords) | |
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
found-> vendor=0x8086, dev=0x0be1, revid=0x09 | |
domain=0, bus=0, slot=2, func=0 | |
class=03-00-00, hdrtype=0x00, mfdev=0 | |
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) | |
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
intpin=a, irq=11 | |
powerspec 2 supports D0 D3 current D0 | |
MSI supports 1 message | |
map[10]: type Memory, range 32, base 0xd0100000, size 20, enabled | |
map[14]: type I/O Port, range 32, base 0x20a0, size 3, enabled | |
pcib0: matched entry for 0.2.INTA | |
pcib0: slot 2 INTA hardwired to IRQ 16 | |
found-> vendor=0x8086, dev=0x27d8, revid=0x02 | |
domain=0, bus=0, slot=27, func=0 | |
class=04-03-00, hdrtype=0x00, mfdev=0 | |
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) | |
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
intpin=a, irq=9 | |
powerspec 2 supports D0 D3 current D0 | |
MSI supports 1 message, 64 bit | |
map[10]: type Memory, range 64, base 0xd0300000, size 14, enabled | |
pcib0: matched entry for 0.27.INTA | |
pcib0: slot 27 INTA hardwired to IRQ 22 | |
found-> vendor=0x8086, dev=0x27c8, revid=0x02 | |
domain=0, bus=0, slot=29, func=0 | |
class=0c-03-00, hdrtype=0x00, mfdev=1 | |
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) | |
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
intpin=a, irq=10 | |
map[20]: type I/O Port, range 32, base 0x2080, size 5, enabled | |
pcib0: matched entry for 0.29.INTA | |
pcib0: slot 29 INTA hardwired to IRQ 23 | |
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2080 | |
found-> vendor=0x8086, dev=0x27c9, revid=0x02 | |
domain=0, bus=0, slot=29, func=1 | |
class=0c-03-00, hdrtype=0x00, mfdev=0 | |
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) | |
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
intpin=b, irq=11 | |
map[20]: type I/O Port, range 32, base 0x2060, size 5, enabled | |
pcib0: matched entry for 0.29.INTB | |
pcib0: slot 29 INTB hardwired to IRQ 19 | |
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2060 | |
found-> vendor=0x8086, dev=0x27ca, revid=0x02 | |
domain=0, bus=0, slot=29, func=2 | |
class=0c-03-00, hdrtype=0x00, mfdev=0 | |
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) | |
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
intpin=c, irq=9 | |
map[20]: type I/O Port, range 32, base 0x2040, size 5, enabled | |
pcib0: matched entry for 0.29.INTC | |
pcib0: slot 29 INTC hardwired to IRQ 18 | |
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2040 | |
found-> vendor=0x8086, dev=0x27cb, revid=0x02 | |
domain=0, bus=0, slot=29, func=3 | |
class=0c-03-00, hdrtype=0x00, mfdev=0 | |
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) | |
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
intpin=d, irq=11 | |
map[20]: type I/O Port, range 32, base 0x2020, size 5, enabled | |
pcib0: matched entry for 0.29.INTD | |
pcib0: slot 29 INTD hardwired to IRQ 16 | |
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2020 | |
found-> vendor=0x8086, dev=0x27cc, revid=0x02 | |
domain=0, bus=0, slot=29, func=7 | |
class=0c-03-20, hdrtype=0x00, mfdev=0 | |
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) | |
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
intpin=a, irq=10 | |
powerspec 2 supports D0 D3 current D0 | |
map[10]: type Memory, range 32, base 0xd0204000, size 10, enabled | |
pcib0: matched entry for 0.29.INTA | |
pcib0: slot 29 INTA hardwired to IRQ 23 | |
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd0204000 | |
ehci early: SMM active, request owner change | |
found-> vendor=0x8086, dev=0x2448, revid=0xe2 | |
domain=0, bus=0, slot=30, func=0 | |
class=06-04-01, hdrtype=0x01, mfdev=0 | |
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) | |
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) | |
found-> vendor=0x8086, dev=0x27bc, revid=0x02 | |
domain=0, bus=0, slot=31, func=0 | |
class=06-01-00, hdrtype=0x00, mfdev=1 | |
cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords) | |
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
found-> vendor=0x8086, dev=0x27da, revid=0x02 | |
domain=0, bus=0, slot=31, func=3 | |
class=0c-05-00, hdrtype=0x00, mfdev=0 | |
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) | |
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
intpin=b, irq=11 | |
map[20]: type I/O Port, range 32, base 0x2000, size 5, enabled | |
pcib0: matched entry for 0.31.INTB | |
pcib0: slot 31 INTB hardwired to IRQ 19 | |
vgapci0: <VGA-compatible display> port 0x20a0-0x20a7 mem 0xd0100000-0xd01fffff irq 16 at device 2.0 on pci0 | |
pci0: <multimedia, HDA> at device 27.0 (no driver attached) | |
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x2080-0x209f irq 23 at device 29.0 on pci0 | |
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 49 | |
uhci0: [MPSAFE] | |
uhci0: [ITHREAD] | |
uhci0: LegSup = 0x2f00 | |
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0 | |
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x2060-0x207f irq 19 at device 29.1 on pci0 | |
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 50 | |
uhci1: [MPSAFE] | |
uhci1: [ITHREAD] | |
uhci1: LegSup = 0x2f00 | |
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1 | |
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x2040-0x205f irq 18 at device 29.2 on pci0 | |
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 51 | |
uhci2: [MPSAFE] | |
uhci2: [ITHREAD] | |
uhci2: LegSup = 0x2f00 | |
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2 | |
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x2020-0x203f irq 16 at device 29.3 on pci0 | |
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52 | |
uhci3: [MPSAFE] | |
uhci3: [ITHREAD] | |
uhci3: LegSup = 0x2f00 | |
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3 | |
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xd0204000-0xd02043ff irq 23 at device 29.7 on pci0 | |
ehci0: [MPSAFE] | |
ehci0: [ITHREAD] | |
usbus4: EHCI version 1.0 | |
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 | |
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 | |
pcib1: domain 0 | |
pcib1: secondary bus 1 | |
pcib1: subordinate bus 1 | |
pcib1: I/O decode 0x1000-0x1fff | |
pcib1: memory decode 0xd0000000-0xd00fffff | |
pcib1: no prefetched decode | |
pcib1: Subtractively decoded bridge. | |
pci1: <ACPI PCI bus> on pcib1 | |
pci1: domain=0, physical bus=1 | |
found-> vendor=0x105a, dev=0x3376, revid=0x02 | |
domain=0, bus=1, slot=0, func=0 | |
class=01-04-00, hdrtype=0x00, mfdev=0 | |
cmdreg=0x0017, statreg=0x0230, cachelnsz=16 (dwords) | |
lattimer=0x60 (2880 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns) | |
intpin=a, irq=10 | |
powerspec 2 supports D0 D1 D3 current D0 | |
map[10]: type I/O Port, range 32, base 0x1080, size 6, enabled | |
pcib1: requested I/O range 0x1080-0x10bf: in range | |
map[14]: type I/O Port, range 32, base 0x10c0, size 4, enabled | |
pcib1: requested I/O range 0x10c0-0x10cf: in range | |
map[18]: type I/O Port, range 32, base 0x1000, size 7, enabled | |
pcib1: requested I/O range 0x1000-0x107f: in range | |
map[1c]: type Memory, range 32, base 0xd0020000, size 12, enabled | |
pcib1: requested memory range 0xd0020000-0xd0020fff: good | |
map[20]: type Memory, range 32, base 0xd0000000, size 17, enabled | |
pcib1: requested memory range 0xd0000000-0xd001ffff: good | |
pcib1: matched entry for 1.0.INTA | |
pcib1: slot 0 INTA hardwired to IRQ 20 | |
atapci0: <Promise PDC20376 SATA150 controller> port 0x1080-0x10bf,0x10c0-0x10cf,0x1000-0x107f mem 0xd0020000-0xd0020fff,0xd0000000-0xd001ffff irq 20 at device 0.0 on pci1 | |
pci1: child atapci0 requested type 4 for rid 0x20, but the BAR says it is an memio | |
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 53 | |
atapci0: [MPSAFE] | |
atapci0: [ITHREAD] | |
atapci0: Reserved 0x20000 bytes for rid 0x20 type 3 at 0xd0000000 | |
atapci0: Reserved 0x1000 bytes for rid 0x1c type 3 at 0xd0020000 | |
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 53 | |
atapci0: [MPSAFE] | |
atapci0: [ITHREAD] | |
ata2: <ATA channel 0> on atapci0 | |
ata2: SATA connect timeout status=00000100 | |
ata2: [MPSAFE] | |
ata2: [ITHREAD] | |
ata3: <ATA channel 1> on atapci0 | |
ata3: SATA connect timeout status=00000000 | |
ata3: [MPSAFE] | |
ata3: [ITHREAD] | |
ata4: <ATA channel 2> on atapci0 | |
ata4: reset tp1 mask=03 ostat0=60 ostat1=70 | |
ata4: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 | |
ata4: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 | |
ata4: reset tp2 stat0=20 stat1=30 devices=0x0 | |
ata4: [MPSAFE] | |
ata4: [ITHREAD] | |
isab0: <PCI-ISA bridge> at device 31.0 on pci0 | |
isa0: <ISA bus> on isab0 | |
pci0: <serial bus, SMBus> at device 31.3 (no driver attached) | |
acpi_button0: <Power Button> on acpi0 | |
acpi_button1: <Sleep Button> on acpi0 | |
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 | |
atrtc0: Warning: Couldn't map I/O. | |
atrtc0: registered as a time-of-day clock (resolution 1000000us) | |
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 3 flags 0x10 on acpi0 | |
ioapic0: Changing polarity for pin 3 to low | |
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 54 | |
uart0: [FILTER] | |
uart0: fast interrupt | |
uart0: console (115200,n,8,1) | |
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 4 on acpi0 | |
ioapic0: Changing polarity for pin 4 to low | |
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 55 | |
uart1: [FILTER] | |
uart1: fast interrupt | |
ex_isa_identify() | |
isa_probe_children: disabling PnP devices | |
atrtc: atrtc0 already exists; skipping it | |
sc: sc0 already exists; skipping it | |
uart: uart0 already exists; skipping it | |
uart: uart1 already exists; skipping it | |
isa_probe_children: probing non-PnP devices | |
sc0: <System console> at flags 0x100 on isa0 | |
sc0: VGA <16 virtual consoles, flags=0x300> | |
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) | |
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 | |
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 | |
atkbd0: <AT Keyboard> irq 1 on atkbdc0 | |
kbd0 at atkbd0 | |
atkbd: unable to get the current command byte value. | |
kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000 | |
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 56 | |
atkbd0: [GIANT-LOCKED] | |
atkbd0: [ITHREAD] | |
psm0: current command byte:ffffffff | |
psm0: unable to get the current command byte value. | |
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 | |
ppc0: cannot reserve I/O port range | |
ppc0: <Parallel port> failed to probe at irq 7 on isa0 | |
isa_probe_children: probing PnP devices | |
p4tcc0: <CPU Frequency Thermal Control> on cpu0 | |
p4tcc1: <CPU Frequency Thermal Control> on cpu1 | |
Device configuration finished. | |
Reducing kern.maxvnodes 256816 -> 100000 | |
procfs registered | |
RTC BIOS diagnostic error 80<clock_battery> | |
lapic: Divisor 2, Frequency 67402737 Hz | |
Timecounter "TSC" frequency 1887276552 Hz quality -100 | |
Timecounters tick every 1.000 msec | |
crypto: <crypto device> | |
ata2: DISCONNECT requested | |
ata2: CONNECT requested | |
vlan: initialized, using hash tables with chaining | |
IPsec: Initialized Security Association Processing. | |
pflog0: bpf attached | |
pfsync0: bpf attached | |
enc0: bpf attached | |
lo0: bpf attached | |
hptrr: no controller detected. | |
ata2: Identifying devices: 00000000 | |
ata2: New devices: 00000000 | |
ata3: Identifying devices: 00000000 | |
ata3: New devices: 00000000 | |
ata4: Identifying devices: 00000000 | |
ata4: New devices: 00000000 | |
usbus0: 12Mbps Full Speed USB v1.0 | |
usbus1: 12Mbps Full Speed USB v1.0 | |
usbus2: 12Mbps Full Speed USB v1.0 | |
usbus3: 12Mbps Full Speed USB v1.0 | |
usbus4: 480Mbps High Speed USB v2.0 | |
ata2: reiniting channel .. | |
ugen0.1: <Intel> at usbus0 | |
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 | |
ugen1.1: <Intel> at usbus1 | |
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 | |
ugen2.1: <Intel> at usbus2 | |
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 | |
ugen3.1: <Intel> at usbus3 | |
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 | |
ugen4.1: <Intel> at usbus4 | |
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 | |
uhub0: 2 ports with 2 removable, self powered | |
uhub1: 2 ports with 2 removable, self powered | |
uhub2: 2 ports with 2 removable, self powered | |
uhub3: 2 ports with 2 removable, self powered | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
uhub4: 8 ports with 8 removable, self powered | |
ugen4.2: <Generic> at usbus4 | |
umass0: <Bulk-In, Bulk-Out, Interface> on usbus4 | |
umass0: SCSI over Bulk-Only; quirks = 0x0000 | |
umass0:0:0:-1: Attached to scbus0 | |
(probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0? | |
(probe0:umass-sim0:0:0:0): SCSI status error | |
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 | |
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error | |
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition | |
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) | |
(probe0:umass-sim0:0:0:0): Error 6, Unretryable error | |
(probe0:umass-sim0:0:0:1): Down reving Protocol Version from 2 to 0? | |
(probe0:umass-sim0:0:0:1): SCSI status error | |
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 | |
(probe0:umass-sim0:0:0:1): CAM status: SCSI Status Error | |
(probe0:umass-sim0:0:0:1): SCSI status: Check Condition | |
(probe0:umass-sim0:0:0:1): SCSI sense: NOT READY asc:3a,0 (Medium not present) | |
(probe0:umass-sim0:0:0:1): Error 6, Unretryable error | |
ugen4.3: <vendor 0x0bda> at usbus4 | |
ugen4.4: <SanDisk> at usbus4 | |
umass1: <SanDisk Cruzer Blade, class 0/0, rev 2.00/1.03, addr 4> on usbus4 | |
umass1: SCSI over Bulk-Only; quirks = 0x0000 | |
ugen2.2: <BTC> at usbus2 | |
ukbd0: <BTC USB Keyboard and Mouse, class 0/0, rev 1.00/21.10, addr 2> on usbus2 | |
kbd2 at ukbd0 | |
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 | |
ums0: <BTC USB Keyboard and Mouse, class 0/0, rev 1.00/21.10, addr 2> on usbus2 | |
ums0: 3 buttons and [XYZ] coordinates ID=1 | |
umass1:1:1:-1: Attached to scbus1 | |
pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0 | |
pass0: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device | |
pass0: Serial Number 20060413092100000 | |
pass0: 40.000MB/s transfers | |
pass1 at umass-sim0 bus 0 scbus0 target 0 lun 1 | |
pass1: <Generic- MS/MS-Pro/HG 1.00> Removable Direct Access SCSI-0 device | |
pass1: Serial Number 20060413092100000 | |
pass1: 40.000MB/s transfers | |
pass2 at umass-sim1 bus 1 scbus1 target 0 lun 0 | |
pass2: <SanDisk Cruzer Blade 1.20> Removable Direct Access SCSI-5 device | |
pass2: Serial Number 200429081318F4305212 | |
pass2: 40.000MB/s transfers | |
GEOM: new disk da0 | |
ATA PseudoRAID loaded | |
da2 at umass-sim1 bus 1 scbus1 target 0 lun 0 | |
da2: <SanDisk Cruzer Blade 1.20> Removable Direct Access SCSI-5 device | |
da2: Serial Number 200429081318F4305212 | |
da2: 40.000MB/s transfers | |
da2: 3819MB (7821312 512 byte sectors: 255H 63S/T 486C) | |
(da0:umass-sim0:0:0:0): SCSI status error | |
(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 | |
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error | |
(da0:umass-sim0:0:0:0): SCSI status: Check Condition | |
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) | |
(da0:umass-sim0:0:0:0): Error 6, Unretryable error | |
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 | |
da0: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device | |
da0: Serial Number 20060413092100000 | |
da0: 40.000MB/s transfers | |
da0: Attempt to query device size failed: NOT READY, Medium not present | |
lapic1: Forcing LINT1 to edge trigger | |
(da1:SMP: AP CPU #1 Launched! | |
umass-sim0:0:cpu1 AP: | |
0: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff | |
1): lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff | |
SCSI status error | |
timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 | |
(da1:umass-sim0:0:0:1): READ CAPACITY(10). CDB: 25 20 0 0 0 0 0 0 0 0 | |
ioapic0: routing intpin 3 ((da1:umass-sim0:0:0:1): CAM status: SCSI Status Error | |
ISA IRQ 3(da1:umass-sim0:0:0:1): SCSI status: Check Condition | |
) to lapic 1 vector 48 | |
(da1:umass-sim0:0:0:1): SCSI sense: NOT READY asc:3a,0 (Medium not present) | |
(da1:umass-sim0:0:0:1): Error 6, Unretryable error | |
da1 at umass-sim0 bus 0 scbus0 target 0 lun 1 | |
da1: <Generic- MS/MS-Pro/HG 1.00> Removable Direct Access SCSI-0 device | |
da1: Serial Number 20060413092100000 | |
da1: 40.000MB/s transfers | |
da1: Attempt to query device size failed: NOT READY, Medium not present | |
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 49 | |
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 50 | |
ioapic0: routing intpin 20 ((da0:PCI IRQ 20umass-sim0:0:) to lapic 1 vector 51 | |
0:0): SCSI status error | |
(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 | |
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error | |
(da0:umass-sim0:0:0:0): SCSI status: Check Condition | |
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) | |
(da0:umass-sim0:0:0:0): Error 6, Unretryable error | |
Opened disk da0 -> 6 | |
(da0:umass-sim0:0:0:0): SCSI status error | |
(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 | |
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error | |
(da0:umass-sim0:0:0:0): SCSI status: Check Condition | |
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) | |
(da0:umass-sim0:0:0:0): Error 6, Unretryable error | |
Opened disk da0 -> 6 | |
(da0:umass-sim0:0:0:0): SCSI status error | |
(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 | |
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error | |
(da0:umass-sim0:0:0:0): SCSI status: Check Condition | |
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) | |
(da0:umass-sim0:0:0:0): Error 6, Unretryable error | |
Opened disk da0 -> 6 | |
(da0:umass-sim0:0:0:0): SCSI status error | |
(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 | |
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error | |
(da0:umass-sim0:0:0:0): SCSI status: Check Condition | |
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) | |
(da0:umass-sim0:0:0:0): Error 6, Unretryable error | |
Opened disk da0 -> 6 | |
(da0:umass-sim0:0:0:0): SCSI status error | |
(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 | |
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error | |
(da0:umass-sim0:0:0:0): SCSI status: Check Condition | |
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) | |
(da0:umass-sim0:0:0:0): Error 6, Unretryable error | |
Opened disk da0 -> 6 | |
GEOM: new disk da1 | |
GEOM: new disk da2 | |
(da1:umass-sim0:0:0:1): SCSI status error | |
(da1:umass-sim0:0:0:1): READ CAPACITY(10). CDB: 25 20 0 0 0 0 0 0 0 0 | |
(da1:umass-sim0:0:0:1): CAM status: SCSI Status Error | |
(da1:umass-sim0:0:0:1): SCSI status: Check Condition | |
(da1:umass-sim0:0:0:1): SCSI sense: NOT READY asc:3a,0 (Medium not present) | |
(da1:umass-sim0:0:0:1): Error 6, Unretryable error | |
Opened disk da1 -> 6 | |
(da1:umass-sim0:0:0:1): SCSI status error | |
(da1:umass-sim0:0:0:1): READ CAPACITY(10). CDB: 25 20 0 0 0 0 0 0 0 0 | |
(da1:umass-sim0:0:0:1): CAM status: SCSI Status Error | |
(da1:umass-sim0:0:0:1): SCSI status: Check Condition | |
(da1:umass-sim0:0:0:1): SCSI sense: NOT READY asc:3a,0 (Medium not present) | |
(da1:umass-sim0:0:0:1): Error 6, Unretryable error | |
Opened disk da1 -> 6 | |
(da1:umass-sim0:0:0:1): SCSI status error | |
(da1:umass-sim0:0:0:1): READ CAPACITY(10). CDB: 25 20 0 0 0 0 0 0 0 0 | |
(da1:umass-sim0:0:0:1): CAM status: SCSI Status Error | |
(da1:umass-sim0:0:0:1): SCSI status: Check Condition | |
(da1:umass-sim0:0:0:1): SCSI sense: NOT READY asc:3a,0 (Medium not present) | |
(da1:umass-sim0:0:0:1): Error 6, Unretryable error | |
Opened disk da1 -> 6 | |
(da1:umass-sim0:0:0:1): SCSI status error | |
(da1:umass-sim0:0:0:1): READ CAPACITY(10). CDB: 25 20 0 0 0 0 0 0 0 0 | |
(da1:umass-sim0:0:0:1): CAM status: SCSI Status Error | |
(da1:umass-sim0:0:0:1): SCSI status: Check Condition | |
(da1:umass-sim0:0:0:1): SCSI sense: NOT READY asc:3a,0 (Medium not present) | |
(da1:umass-sim0:0:0:1): Error 6, Unretryable error | |
Opened disk da1 -> 6 | |
(da1:umass-sim0:0:0:1): SCSI status error | |
(da1:umass-sim0:0:0:1): READ CAPACITY(10). CDB: 25 20 0 0 0 0 0 0 0 0 | |
(da1:umass-sim0:0:0:1): CAM status: SCSI Status Error | |
(da1:umass-sim0:0:0:1): SCSI status: Check Condition | |
(da1:umass-sim0:0:0:1): SCSI sense: NOT READY asc:3a,0 (Medium not present) | |
(da1:umass-sim0:0:0:1): Error 6, Unretryable error | |
Opened disk da1 -> 6 | |
GEOM: da2: geometry does not match label (16h,63s != 255h,63s). | |
GEOM: da2: media size does not match label. | |
Trying to mount root from ufs:/dev/ufs/pfSense | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ct_to_ts([2012-05-02 14:00:28]) = 1335967228.000000000 | |
start_init: trying /sbin/init | |
May 2 14:00:28 ugen2.init: NSSWITCH(_3: <Lnsdispatch): nisogit, passwd_compat,ech endpwent, not f> at ound, alback provided2 | |
Enter full pathums1: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/11.10, addr 3> on usbus2 | |
name of shell orums1: 3 buttons and [XYZ] coordinates ID=0 | |
RETURN for /binata2: /sh: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000100 | |
ata2: reinit done .. | |
ata2: DISCONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: ata2: reiniting channel .. | |
DISCONNECT requested | |
ata2: CONNECT requested | |
ata2: SATA connect timeout status=00000100 | |
ata2: reinit done .. | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
KDB: enter: manual escape to debugger | |
[thread pid 12 tid 64020 ] | |
Stopped at kdb_enter+0x3d: movq $0,0xa4b500(%rip) | |
db> ddssd | |
No such command | |
db> | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000100 | |
ata2: reinit done .. | |
ata2: DISCONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: CONNECT requested | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
KDB: enter: manual escape to debugger | |
[thread pid 12 tid 64020 ] | |
Stopped at kdb_enter+0x3d: movq $0,0xa4b500(%rip) | |
db> ccc | |
No such command | |
db> help | |
ahd_dump ahd_in ahd_out ahd_pause ahd_sunit ahd_unpause | |
alltrace b break bt c call | |
capture continue d delete dhwatch dwatch | |
examine gdb halt hwatch kill match | |
next p panic print ps reboot | |
reset run s script scripts search | |
set show step t textdump thread | |
trace unscript until w watch watchdog | |
where write x | |
db> show | |
all allchains allpcpu allrman apic bio | |
breaks buffer com conifhk cpusets crypto | |
domain dpcpu_off ffs file files freepages | |
geom idt ifnet inodedeps inpcb intr | |
intrcnt irqs kcrypto lapic llentry lltable | |
lock lockchain lockedbufs lockedvnods locktree malloc | |
map mount msgbuf netisr object page | |
pageq pciregs pcpu pgrpdump prison proc | |
procvm protosw registers rman rtc sleepchain | |
sleepq sleepqueue sockbuf socket sta statab | |
tcpcb thread threads tty turnstile uma | |
unpcb vap vmochk vmopag vnode vnodebufs | |
watches | |
db> show intrcnt | |
irq3: uart0 180 | |
irq18: uhci2 66 | |
irq20: atapci0 30 | |
irq23: uhci0 ehci0 869 | |
cpu0: timer 413534 | |
cpu1: timer 394005 | |
db> show intr | |
irq1: atkbd0 (pid 12) | |
irq3: uart0 (no thread) | |
irq4: uart1 (no thread) | |
irq9: acpi0 (pid 12) | |
irq16: uhci3 (pid 12) | |
irq18: uhci2 (pid 12) | |
irq19: uhci1 (pid 12) | |
irq20: atapci0 (pid 12) {ENTROPY} | |
irq23: uhci0 ehci0 (pid 12) | |
swi3: vm (pid 12) {SOFT} | |
swi1: netisr 0 (pid 12) {SOFT} | |
swi4: clock (pid 12) {SOFT} | |
swi4: clock (pid 12) {SOFT} | |
swi6: Giant taskq (pid 12) {SOFT} | |
swi6: task queue (pid 12) {SOFT} | |
swi2: cambio (pid 12) {SOFT} | |
swi5: + (pid 12) {SOFT} | |
swi0: uart uart (pid 12) {SOFT} | |
db> show irqs | |
irq0: (no thread) | |
irq1: atkbd0 (pid 12) | |
irq3: uart0 (no thread) | |
irq4: uart1 (no thread) | |
irq5: (no thread) | |
irq6: (no thread) | |
irq7: (no thread) | |
irq8: (no thread) | |
irq9: acpi0 (pid 12) | |
irq10: (no thread) | |
irq11: (no thread) | |
irq12: (no thread) | |
irq13: (no thread) | |
irq14: (no thread) | |
irq15: (no thread) | |
irq16: uhci3 (pid 12) | |
irq17: (no thread) | |
irq18: uhci2 (pid 12) | |
irq19: uhci1 (pid 12) | |
irq20: atapci0 (pid 12) {ENTROPY} | |
irq21: (no thread) | |
irq22: (no thread) | |
irq23: uhci0 ehci0 (pid 12) | |
db> show intrcnt | |
irq3: uart0 180 | |
irq18: uhci2 66 | |
irq20: atapci0 30 | |
irq23: uhci0 ehci0 869 | |
cpu0: timer 413534 | |
cpu1: timer 394005 | |
db> c | |
ata2: DISCONNECT requested | |
ata2: ata2: CONNECT requested | |
reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
ata2: reiniting channel .. | |
ata2: SATA connect timeout status=00000000 | |
ata2: reinit done .. | |
KDB: enter: manual escape to debugger | |
[thread pid 12 tid 64020 ] | |
Stopped at kdb_enter+0x3d: movq $0,0xa4b500(%rip) | |
db> | |
KDB: enter: manual escape to debugger | |
[thread pid 12 tid 64020 ] | |
Stopped at kdb_enter+0x3d: movq $0,0xa4b500(%rip) | |
db> | |
KDB: enter: manual escape to debugger | |
[thread pid 12 tid 64020 ] | |
Stopped at kdb_enter+0x3d: movq $0,0xa4b500(%rip) | |
db> | |
KDB: enter: manual escape to debugger | |
[thread pid 12 tid 64020 ] | |
Stopped at kdb_enter+0x3d: movq $0,0xa4b500(%rip) | |
db> | |
KDB: enter: manual escape to debugger | |
[thread pid 12 tid 64020 ] | |
Stopped at kdb_enter+0x3d: movq $0,0xa4b500(%rip) | |
db> kksdfksdfgeg | |
No such command | |
db> show intrcnt | |
irq3: uart0 240 | |
irq18: uhci2 100 | |
irq20: atapci0 31 | |
irq23: uhci0 ehci0 869 | |
cpu0: timer 469869 | |
cpu1: timer 450280 | |
db> show lapic | |
lapic ID = 1 | |
version = 1.4 | |
max LVT = 5 | |
SVR = ff (enabled) | |
TPR = 00 | |
In-service Interrupts: | |
TMR Interrupts: | |
tmr1: 32 33 | |
IRR Interrupts: | |
irr1: 30 32 33 | |
irr7: ef | |
db> |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment