Created
June 18, 2012 02:12
-
-
Save tomari/2946424 to your computer and use it in GitHub Desktop.
ASUS TX97-X Linux inventory
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
processor : 0 | |
vendor_id : GenuineIntel | |
cpu family : 5 | |
model : 4 | |
model name : Pentium MMX | |
stepping : 4 | |
cpu MHz : 200.488 | |
cache size : 0 KB | |
fdiv_bug : no | |
hlt_bug : no | |
f00f_bug : yes | |
coma_bug : no | |
fpu : yes | |
fpu_exception : yes | |
cpuid level : 1 | |
wp : yes | |
flags : fpu vme de pse tsc msr mce cx8 mmx | |
bogomips : 400.97 | |
clflush size : 32 | |
cache_alignment : 32 | |
address sizes : 32 bits physical, 32 bits virtual | |
power management: | |
MemTotal: 255468 kB | |
MemFree: 23592 kB | |
Buffers: 13296 kB | |
Cached: 196456 kB | |
SwapCached: 0 kB | |
Active: 130060 kB | |
Inactive: 86780 kB | |
Active(anon): 4500 kB | |
Inactive(anon): 2676 kB | |
Active(file): 125560 kB | |
Inactive(file): 84104 kB | |
Unevictable: 0 kB | |
Mlocked: 0 kB | |
HighTotal: 0 kB | |
HighFree: 0 kB | |
LowTotal: 255468 kB | |
LowFree: 23592 kB | |
SwapTotal: 148472 kB | |
SwapFree: 148472 kB | |
Dirty: 32 kB | |
Writeback: 0 kB | |
AnonPages: 7108 kB | |
Mapped: 4196 kB | |
Shmem: 88 kB | |
Slab: 12196 kB | |
SReclaimable: 9824 kB | |
SUnreclaim: 2372 kB | |
KernelStack: 432 kB | |
PageTables: 348 kB | |
NFS_Unstable: 0 kB | |
Bounce: 0 kB | |
WritebackTmp: 0 kB | |
CommitLimit: 276204 kB | |
Committed_AS: 40056 kB | |
VmallocTotal: 770040 kB | |
VmallocUsed: 1552 kB | |
VmallocChunk: 765056 kB | |
HugePages_Total: 0 | |
HugePages_Free: 0 | |
HugePages_Rsvd: 0 | |
HugePages_Surp: 0 | |
Hugepagesize: 4096 kB | |
DirectMap4k: 8192 kB | |
DirectMap4M: 253952 kB | |
00:00.0 Host bridge: Intel Corporation 430TX - 82439TX MTXC (rev 01) | |
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- | |
Latency: 32 | |
00:01.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 01) | |
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0 | |
00:01.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master]) | |
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 32 | |
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] | |
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] | |
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] | |
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] | |
Region 4: I/O ports at e000 [size=16] | |
Kernel driver in use: ata_piix | |
00:01.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) | |
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 32 | |
Interrupt: pin D routed to IRQ 10 | |
Region 4: I/O ports at d800 [size=32] | |
Kernel driver in use: uhci_hcd | |
00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 01) | |
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Interrupt: pin ? routed to IRQ 9 | |
Kernel driver in use: piix4_smbus | |
00:09.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 20) | |
Subsystem: Digital Equipment Corporation Device 500a | |
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 32 (5000ns min, 10000ns max) | |
Interrupt: pin A routed to IRQ 10 | |
Region 0: I/O ports at d400 [size=128] | |
Region 1: Memory at e5000000 (32-bit, non-prefetchable) [size=128] | |
[virtual] Expansion ROM at 10000000 [disabled] [size=256K] | |
Kernel driver in use: tulip | |
00:0c.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W [Millennium II] (prog-if 00 [VGA controller]) | |
Subsystem: Matrox Graphics, Inc. Device 0000 | |
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 32 | |
Interrupt: pin A routed to IRQ 11 | |
Region 0: Memory at e6000000 (32-bit, prefetchable) [size=16M] | |
Region 1: Memory at e4800000 (32-bit, non-prefetchable) [size=16K] | |
Region 2: Memory at e4000000 (32-bit, non-prefetchable) [size=8M] | |
[virtual] Expansion ROM at 10040000 [disabled] [size=64K] | |
# dmidecode 2.9 | |
Legacy DMI 2.0 present. | |
32 structures occupying 1016 bytes. | |
Table at 0x000F52BA. | |
Handle 0x0000, DMI type 0, 18 bytes | |
BIOS Information | |
Vendor: Award Software, Inc. | |
Version: #401A0-0108x | |
Release Date: 12/02/97 | |
Address: 0xF0000 | |
Runtime Size: 64 kB | |
ROM Size: 128 kB | |
Characteristics: | |
ISA is supported | |
PCI is supported | |
PNP is supported | |
APM is supported | |
BIOS is upgradeable | |
BIOS shadowing is allowed | |
ESCD support is available | |
Boot from CD is supported | |
Selectable boot is supported | |
BIOS ROM is socketed | |
EDD is supported | |
Japanese floppy for NEC 9800 1.2 MB is supported (int 13h) | |
5.25"/360 KB floppy services are supported (int 13h) | |
5.25"/1.2 MB floppy services are supported (int 13h) | |
3.5"/720 KB floppy services are supported (int 13h) | |
3.5"/2.88 MB floppy services are supported (int 13h) | |
Print screen service is supported (int 5h) | |
8042 keyboard services are supported (int 9h) | |
Serial services are supported (int 14h) | |
Printer services are supported (int 17h) | |
CGA/mono video services are supported (int 10h) | |
Handle 0x0001, DMI type 1, 8 bytes | |
System Information | |
Manufacturer: System Manufacturer | |
Product Name: System Name | |
Version: System Version | |
Serial Number: SYS-1234567890 | |
Handle 0x0002, DMI type 2, 8 bytes | |
Base Board Information | |
Manufacturer: ASUSTeK Computer INC. | |
Product Name: TX97-X | |
Version: REV 2.X | |
Serial Number: MB-1234567890 | |
Handle 0x0003, DMI type 3, 9 bytes | |
Chassis Information | |
Manufacturer: Chassis Manufacture | |
Type: Unknown | |
Lock: Not Present | |
Version: Chassis Version | |
Serial Number: Chassis Serial Number | |
Asset Tag: Asset-1234567890 | |
Handle 0x0004, DMI type 4, 26 bytes | |
Processor Information | |
Socket Designation: SOCKET 7 | |
Type: Central Processor | |
Family: Pentium | |
Manufacturer: Intel Corporation | |
ID: 44 05 00 00 BF 01 80 00 | |
Signature: Type 0, Family 5, Model 4, Stepping 4 | |
Flags: | |
FPU (Floating-point unit on-chip) | |
VME (Virtual mode extension) | |
DE (Debugging extension) | |
PSE (Page size extension) | |
TSC (Time stamp counter) | |
MSR (Model specific registers) | |
MCE (Machine check exception) | |
CX8 (CMPXCHG8 instruction supported) | |
MMX (MMX technology supported) | |
Version: Intel Pentium Processor | |
Voltage: 3.3 V | |
External Clock: 66 MHz | |
Max Speed: 200 MHz | |
Current Speed: 200 MHz | |
Status: Populated, Enabled | |
Upgrade: ZIF Socket | |
Handle 0x0005, DMI type 5, 27 bytes | |
Memory Controller Information | |
Error Detecting Method: None | |
Error Correcting Capabilities: | |
None | |
Supported Interleave: One-way Interleave | |
Current Interleave: One-way Interleave | |
Maximum Memory Module Size: 64 MB | |
Maximum Total Memory Size: 384 MB | |
Supported Speeds: | |
70 ns | |
60 ns | |
50 ns | |
Supported Memory Types: | |
EDO | |
DIMM | |
Memory Module Voltage: 3.3 V | |
Associated Memory Slots: 6 | |
0x0006 | |
0x0007 | |
0x0008 | |
0x0009 | |
0x000A | |
0x000B | |
Handle 0x0007, DMI type 6, 12 bytes | |
Memory Module Information | |
Socket Designation: DIMM1-2 | |
Bank Connections: 0 1 | |
Current Speed: 60 ns | |
Type: Other DIMM | |
Installed Size: 64 MB (Double-bank Connection) | |
Enabled Size: 64 MB (Double-bank Connection) | |
Error Status: OK | |
Handle 0x0008, DMI type 6, 12 bytes | |
Memory Module Information | |
Socket Designation: DIMM2-1 | |
Bank Connections: 2 3 | |
Current Speed: 60 ns | |
Type: Other DIMM | |
Installed Size: 64 MB (Double-bank Connection) | |
Enabled Size: 64 MB (Double-bank Connection) | |
Error Status: OK | |
Handle 0x0009, DMI type 6, 12 bytes | |
Memory Module Information | |
Socket Designation: DIMM2-2 | |
Bank Connections: 2 3 | |
Current Speed: 60 ns | |
Type: Other DIMM | |
Installed Size: 64 MB (Double-bank Connection) | |
Enabled Size: 64 MB (Double-bank Connection) | |
Error Status: OK | |
Handle 0x000A, DMI type 6, 12 bytes | |
Memory Module Information | |
Socket Designation: DIMM3-1 | |
Bank Connections: 4 5 | |
Current Speed: 60 ns | |
Type: SIMM | |
Installed Size: Not Installed | |
Enabled Size: Not Installed | |
Error Status: OK | |
Handle 0x000B, DMI type 6, 12 bytes | |
Memory Module Information | |
Socket Designation: DIMM3-2 | |
Bank Connections: 4 5 | |
Current Speed: 60 ns | |
Type: SIMM | |
Installed Size: Not Installed | |
Enabled Size: Not Installed | |
Error Status: OK | |
Handle 0x000C, DMI type 7, 15 bytes | |
Cache Information | |
Socket Designation: L1 Cache | |
Configuration: Enabled, Not Socketed, Level 1 | |
Operational Mode: Write Back | |
Location: Internal | |
Installed Size: 32 KB | |
Maximum Size: 32 KB | |
Supported SRAM Types: None | |
Installed SRAM Type: None | |
Handle 0x000D, DMI type 7, 15 bytes | |
Cache Information | |
Socket Designation: L2 Cache | |
Configuration: Enabled, Not Socketed, Level 2 | |
Operational Mode: Write Back | |
Location: External | |
Installed Size: 512 KB | |
Maximum Size: 512 KB | |
Supported SRAM Types: | |
Pipeline Burst | |
Installed SRAM Type: Pipeline Burst | |
Handle 0x000E, DMI type 8, 9 bytes | |
Port Connector Information | |
Internal Reference Designator: COM1 | |
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) | |
External Reference Designator: COM A | |
External Connector Type: DB-9 male | |
Port Type: Serial Port 16550A Compatible | |
Handle 0x000F, DMI type 8, 9 bytes | |
Port Connector Information | |
Internal Reference Designator: COM2 | |
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) | |
External Reference Designator: COM B | |
External Connector Type: DB-25 male | |
Port Type: Serial Port 16550A Compatible | |
Handle 0x0010, DMI type 8, 9 bytes | |
Port Connector Information | |
Internal Reference Designator: PRINTER | |
Internal Connector Type: 25 Pin Dual Inline (pin 26 cut) | |
External Reference Designator: LPT | |
External Connector Type: DB-25 female | |
Port Type: Parallel Port ECP/EPP | |
Handle 0x0011, DMI type 8, 9 bytes | |
Port Connector Information | |
Internal Reference Designator: KEY | |
Internal Connector Type: None | |
External Reference Designator: KEYBOARD | |
External Connector Type: Micro DIN | |
Port Type: Keyboard Port | |
Handle 0x0012, DMI type 8, 9 bytes | |
Port Connector Information | |
Internal Reference Designator: PRIMARY IDE | |
Internal Connector Type: On Board IDE | |
External Reference Designator: IDE-1 | |
External Connector Type: None | |
Port Type: None | |
Handle 0x0013, DMI type 8, 9 bytes | |
Port Connector Information | |
Internal Reference Designator: SECONDARY IDE | |
Internal Connector Type: On Board IDE | |
External Reference Designator: IDE-2 | |
External Connector Type: None | |
Port Type: None | |
Handle 0x0014, DMI type 8, 9 bytes | |
Port Connector Information | |
Internal Reference Designator: FLOPPY | |
Internal Connector Type: On Board Floppy | |
External Reference Designator: FLOPPY | |
External Connector Type: None | |
Port Type: None | |
Handle 0x0015, DMI type 9, 12 bytes | |
System Slot Information | |
Designation: PCI Slot1 | |
Type: 32-bit PCI | |
Current Usage: In Use | |
Length: Long | |
ID: 12 | |
Characteristics: | |
5.0 V is provided | |
Handle 0x0016, DMI type 9, 12 bytes | |
System Slot Information | |
Designation: PCI Slot2 | |
Type: 32-bit PCI | |
Current Usage: Available | |
Length: Long | |
ID: 11 | |
Characteristics: | |
5.0 V is provided | |
Handle 0x0017, DMI type 9, 12 bytes | |
System Slot Information | |
Designation: PCI Slot3 | |
Type: 32-bit PCI | |
Current Usage: Available | |
Length: Long | |
ID: 10 | |
Characteristics: | |
5.0 V is provided | |
Handle 0x0018, DMI type 9, 12 bytes | |
System Slot Information | |
Designation: PCI Slot4 | |
Type: 32-bit PCI | |
Current Usage: In Use | |
Length: Long | |
ID: 9 | |
Characteristics: | |
5.0 V is provided | |
Opening is shared | |
Handle 0x0019, DMI type 9, 12 bytes | |
System Slot Information | |
Designation: ISA Slot1 | |
Type: 16-bit ISA | |
Current Usage: Unknown | |
Length: Long | |
Characteristics: | |
5.0 V is provided | |
Opening is shared | |
Handle 0x001A, DMI type 9, 12 bytes | |
System Slot Information | |
Designation: ISA Slot2 | |
Type: 16-bit ISA | |
Current Usage: Unknown | |
Length: Long | |
Characteristics: | |
5.0 V is provided | |
Handle 0x001B, DMI type 9, 12 bytes | |
System Slot Information | |
Designation: ISA Slot3 | |
Type: 16-bit ISA | |
Current Usage: Unknown | |
Length: Long | |
Characteristics: | |
5.0 V is provided | |
Handle 0x001C, DMI type 9, 12 bytes | |
System Slot Information | |
Designation: ISA Slot4 | |
Type: 16-bit ISA | |
Current Usage: Unknown | |
Length: Long | |
Characteristics: | |
5.0 V is provided | |
Handle 0x001D, DMI type 11, 5 bytes | |
OEM Strings | |
String 1: OEM String | |
Handle 0x001E, DMI type 12, 5 bytes | |
System Configuration Options | |
Option 1: System String | |
Handle 0x001F, DMI type 13, 22 bytes | |
BIOS Language Information | |
Installable Languages: 1 | |
ENGLISH | |
Currently Installed Language: ENGLISH | |
Wrong DMI structures count: 32 announced, only 31 decoded. | |
[ 0.000000] Initializing cgroup subsys cpuset | |
[ 0.000000] Initializing cgroup subsys cpu | |
[ 0.000000] Linux version 2.6.32-5-486 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Sun May 6 03:29:22 UTC 2012 | |
[ 0.000000] KERNEL supported cpus: | |
[ 0.000000] Intel GenuineIntel | |
[ 0.000000] AMD AuthenticAMD | |
[ 0.000000] NSC Geode by NSC | |
[ 0.000000] Cyrix CyrixInstead | |
[ 0.000000] Centaur CentaurHauls | |
[ 0.000000] Transmeta GenuineTMx86 | |
[ 0.000000] Transmeta TransmetaCPU | |
[ 0.000000] UMC UMC UMC UMC | |
[ 0.000000] BIOS-provided physical RAM map: | |
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) | |
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) | |
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000010000000 (usable) | |
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) | |
[ 0.000000] DMI 2.0 present. | |
[ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x100000 | |
[ 0.000000] initial memory mapped : 0 - 01800000 | |
[ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000 | |
[ 0.000000] 0000000000 - 0000400000 page 4k | |
[ 0.000000] 0000400000 - 0010000000 page 2M | |
[ 0.000000] kernel direct mapping tables up to 10000000 @ 7000-b000 | |
[ 0.000000] RAMDISK: 0b7eb000 - 0c03f636 | |
[ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219) | |
[ 0.000000] 0MB HIGHMEM available. | |
[ 0.000000] 256MB LOWMEM available. | |
[ 0.000000] mapped low ram: 0 - 10000000 | |
[ 0.000000] low ram: 0 - 10000000 | |
[ 0.000000] node 0 low ram: 00000000 - 10000000 | |
[ 0.000000] node 0 bootmap 00001000 - 00003000 | |
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0010000000] | |
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] | |
[ 0.000000] #1 [0001000000 - 0001453a90] TEXT DATA BSS ==> [0001000000 - 0001453a90] | |
[ 0.000000] #2 [000b7eb000 - 000c03f636] RAMDISK ==> [000b7eb000 - 000c03f636] | |
[ 0.000000] #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] | |
[ 0.000000] #4 [0001454000 - 000145a164] BRK ==> [0001454000 - 000145a164] | |
[ 0.000000] #5 [0000001000 - 0000003000] BOOTMAP ==> [0000001000 - 0000003000] | |
[ 0.000000] Zone PFN ranges: | |
[ 0.000000] DMA 0x00000000 -> 0x00001000 | |
[ 0.000000] Normal 0x00001000 -> 0x00010000 | |
[ 0.000000] HighMem 0x00010000 -> 0x00010000 | |
[ 0.000000] Movable zone start PFN for each node | |
[ 0.000000] early_node_map[2] active PFN ranges | |
[ 0.000000] 0: 0x00000000 -> 0x000000a0 | |
[ 0.000000] 0: 0x00000100 -> 0x00010000 | |
[ 0.000000] On node 0 totalpages: 65440 | |
[ 0.000000] free_area_init_node: node 0, pgdat c1360c64, node_mem_map c145c000 | |
[ 0.000000] DMA zone: 32 pages used for memmap | |
[ 0.000000] DMA zone: 0 pages reserved | |
[ 0.000000] DMA zone: 3968 pages, LIFO batch:0 | |
[ 0.000000] Normal zone: 480 pages used for memmap | |
[ 0.000000] Normal zone: 60960 pages, LIFO batch:15 | |
[ 0.000000] Using APIC driver default | |
[ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org | |
[ 0.000000] No local APIC present or hardware disabled | |
[ 0.000000] APIC: disable apic facility | |
[ 0.000000] nr_irqs_gsi: 16 | |
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 | |
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 | |
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000) | |
[ 0.000000] Booting paravirtualized kernel on bare hardware | |
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64928 | |
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-486 root=UUID=7f36634f-822c-485a-8fce-a7cf6cb014f8 ro quiet | |
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) | |
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) | |
[ 0.000000] Initializing CPU#0 | |
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000) | |
[ 0.000000] Memory: 246248k/262144k available (2342k kernel code, 15264k reserved, 1145k data, 444k init, 0k highmem) | |
[ 0.000000] virtual kernel memory layout: | |
[ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB) | |
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) | |
[ 0.000000] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB) | |
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) | |
[ 0.000000] .init : 0xc1368000 - 0xc13d7000 ( 444 kB) | |
[ 0.000000] .data : 0xc124985d - 0xc1367c84 (1145 kB) | |
[ 0.000000] .text : 0xc1000000 - 0xc124985d (2342 kB) | |
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. | |
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
[ 0.000000] Hierarchical RCU implementation. | |
[ 0.000000] NR_IRQS:288 | |
[ 0.000000] Console: colour VGA+ 80x25 | |
[ 0.000000] console [tty0] enabled | |
[ 0.000000] Fast TSC calibration using PIT | |
[ 0.000000] Detected 200.488 MHz processor. | |
[ 0.004027] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.97 BogoMIPS (lpj=801952) | |
[ 0.004231] Security Framework initialized | |
[ 0.004291] SELinux: Disabled at boot. | |
[ 0.004360] Mount-cache hash table entries: 512 | |
[ 0.005640] Initializing cgroup subsys ns | |
[ 0.005681] Initializing cgroup subsys cpuacct | |
[ 0.005712] Initializing cgroup subsys devices | |
[ 0.005743] Initializing cgroup subsys freezer | |
[ 0.005772] Initializing cgroup subsys net_cls | |
[ 0.008166] Intel Pentium with F0 0F bug - workaround enabled. | |
[ 0.008203] | |
[ 0.008341] CPU: Intel Pentium MMX stepping 04 | |
[ 0.008400] Checking 'hlt' instruction... OK. | |
[ 0.036351] devtmpfs: initialized | |
[ 0.040431] regulator: core version 0.5 | |
[ 0.041154] NET: Registered protocol family 16 | |
[ 0.042688] EISA bus registered | |
[ 0.045812] PCI: PCI BIOS revision 2.10 entry at 0xf0510, last bus=0 | |
[ 0.045847] PCI: Using configuration type 1 for base access | |
[ 0.052971] bio: create slab <bio-0> at 0 | |
[ 0.053811] ACPI: Interpreter disabled. | |
[ 0.054441] vgaarb: loaded | |
[ 0.055445] PCI: Probing PCI hardware | |
[ 0.055479] PCI: Probing PCI hardware (bus 00) | |
[ 0.056245] pci 0000:00:01.1: reg 20 io port: [0xe000-0xe00f] | |
[ 0.056426] pci 0000:00:01.2: reg 20 io port: [0xd800-0xd81f] | |
[ 0.056559] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, | |
[ 0.056584] * this clock source is slow. Consider trying other clock sources | |
[ 0.056701] pci 0000:00:01.3: quirk: region e400-e43f claimed by PIIX4 ACPI | |
[ 0.056744] pci 0000:00:01.3: quirk: region e800-e80f claimed by PIIX4 SMB | |
[ 0.056788] pci 0000:00:01.3: PIIX4 devres B PIO at 0290-0297 | |
[ 0.056937] pci 0000:00:09.0: reg 10 io port: [0xd400-0xd47f] | |
[ 0.056985] pci 0000:00:09.0: reg 14 32bit mmio: [0xe5000000-0xe500007f] | |
[ 0.057054] pci 0000:00:09.0: reg 30 32bit mmio pref: [0x000000-0x03ffff] | |
[ 0.057200] pci 0000:00:0c.0: reg 10 32bit mmio pref: [0xe6000000-0xe6ffffff] | |
[ 0.057252] pci 0000:00:0c.0: reg 14 32bit mmio: [0xe4800000-0xe4803fff] | |
[ 0.057300] pci 0000:00:0c.0: reg 18 32bit mmio: [0xe4000000-0xe47fffff] | |
[ 0.057363] pci 0000:00:0c.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] | |
[ 0.059475] vgaarb: device added: PCI:0000:00:0c.0,decodes=io+mem,owns=io+mem,locks=none | |
[ 0.059778] pci 0000:00:01.0: PIIX/ICH IRQ router [8086:7110] | |
[ 0.061145] Switching to clocksource tsc | |
[ 0.073981] pnp: PnP ACPI: disabled | |
[ 0.074021] PnPBIOS: Scanning system for PnP BIOS support... | |
[ 0.074515] PnPBIOS: Found PnP BIOS installation structure at 0xc00fcf10 | |
[ 0.074563] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xcf40, dseg 0xf0000 | |
[ 0.080209] PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver | |
[ 0.080346] system 00:06: iomem range 0x0-0x9ffff could not be reserved | |
[ 0.080395] system 00:06: iomem range 0x100000-0xfffffff could not be reserved | |
[ 0.080443] system 00:06: iomem range 0xe8000-0xfffff could not be reserved | |
[ 0.080491] system 00:06: iomem range 0xfffe0000-0xffffffff could not be reserved | |
[ 0.080599] system 00:0f: ioport range 0x290-0x297 has been reserved | |
[ 0.080648] system 00:0f: ioport range 0xe400-0xe43f has been reserved | |
[ 0.080695] system 00:0f: ioport range 0xe800-0xe83f could not be reserved | |
[ 0.083744] pci_bus 0000:00: resource 0 io: [0x00-0xffff] | |
[ 0.083787] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] | |
[ 0.084102] NET: Registered protocol family 2 | |
[ 0.085053] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.088292] TCP established hash table entries: 8192 (order: 4, 65536 bytes) | |
[ 0.089087] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) | |
[ 0.089499] TCP: Hash tables configured (established 8192 bind 8192) | |
[ 0.089532] TCP reno registered | |
[ 0.090183] NET: Registered protocol family 1 | |
[ 0.090351] pci 0000:00:00.0: Limiting direct PCI/PCI transfers | |
[ 0.090475] PCI: setting IRQ 10 as level-triggered | |
[ 0.090512] pci 0000:00:01.2: found PCI INT D -> IRQ 10 | |
[ 0.090587] pci 0000:00:01.2: sharing IRQ 10 with 0000:00:09.0 | |
[ 0.090700] pci 0000:00:0c.0: Boot video device | |
[ 0.091236] Unpacking initramfs... | |
[ 4.993743] Freeing initrd memory: 8529k freed | |
[ 5.100745] audit: initializing netlink socket (disabled) | |
[ 5.100882] type=2000 audit(1339983666.098:1): initialized | |
[ 5.135921] HugeTLB registered 4 MB page size, pre-allocated 0 pages | |
[ 5.158581] VFS: Disk quotas dquot_6.5.2 | |
[ 5.159472] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
[ 5.160555] msgmni has been set to 498 | |
[ 5.163140] alg: No test for stdrng (krng) | |
[ 5.163605] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) | |
[ 5.163649] io scheduler noop registered | |
[ 5.163677] io scheduler anticipatory registered | |
[ 5.163707] io scheduler deadline registered | |
[ 5.163948] io scheduler cfq registered (default) | |
[ 5.166078] isapnp: Scanning for PnP cards... | |
[ 5.520604] isapnp: No Plug & Play device found | |
[ 5.547882] Linux agpgart interface v0.103 | |
[ 5.549625] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
[ 5.550121] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A | |
[ 5.550777] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A | |
[ 5.553024] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A | |
[ 5.554114] 00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A | |
[ 5.556901] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1 | |
[ 5.556938] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp | |
[ 5.557880] serio: i8042 KBD port at 0x60,0x64 irq 1 | |
[ 5.559301] mice: PS/2 mouse device common for all mice | |
[ 5.560493] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 | |
[ 5.560596] rtc0: alarms up to one day, 114 bytes nvram | |
[ 5.561181] EISA: Probing bus 0 at eisa.0 | |
[ 5.561347] EISA: Detected 0 cards. | |
[ 5.561379] cpuidle: using governor ladder | |
[ 5.561408] cpuidle: using governor menu | |
[ 5.561463] No iBFT detected. | |
[ 5.566662] TCP cubic registered | |
[ 5.569349] NET: Registered protocol family 10 | |
[ 5.579928] Mobile IPv6 | |
[ 5.579966] NET: Registered protocol family 17 | |
[ 5.580057] Using IPI Shortcut mode | |
[ 5.582447] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 | |
[ 5.582634] PM: Resume from disk failed. | |
[ 5.582771] registered taskstats version 1 | |
[ 5.583724] rtc_cmos 00:09: setting system clock to 2012-06-18 01:41:06 UTC (1339983666) | |
[ 5.584244] Initalizing network drop monitor service | |
[ 5.584513] Freeing unused kernel memory: 444k freed | |
[ 5.590781] Write protecting the kernel text: 2344k | |
[ 5.591033] Write protecting the kernel read-only data: 896k | |
[ 5.839272] udev[42]: starting version 164 | |
[ 7.354649] SCSI subsystem initialized | |
[ 7.362189] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007) | |
[ 7.362459] tulip 0000:00:09.0: found PCI INT A -> IRQ 10 | |
[ 7.362533] tulip 0000:00:09.0: sharing IRQ 10 with 0000:00:01.2 | |
[ 7.372588] tulip0: EEPROM default media type Autosense. | |
[ 7.372645] tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block. | |
[ 7.377063] tulip0: MII transceiver #5 config 1000 status 782f advertising 01e1. | |
[ 7.464065] eth0: Digital DS21140 Tulip rev 32 at Port 0xd400, 00:00:f8:03:c4:e3, IRQ 10. | |
[ 7.659307] usbcore: registered new interface driver usbfs | |
[ 7.662519] usbcore: registered new interface driver hub | |
[ 7.665765] usbcore: registered new device driver usb | |
[ 7.683426] Floppy drive(s): fd0 is 1.44M | |
[ 8.017070] FDC 0 is a post-1991 82077 | |
[ 8.053064] libata version 3.00 loaded. | |
[ 8.115114] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 8.174255] ata_piix 0000:00:01.1: version 2.13 | |
[ 8.204517] scsi0 : ata_piix | |
[ 8.207380] scsi1 : ata_piix | |
[ 8.209342] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14 | |
[ 8.209389] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15 | |
[ 8.216945] uhci_hcd: USB Universal Host Controller Interface driver | |
[ 8.217381] uhci_hcd 0000:00:01.2: found PCI INT D -> IRQ 10 | |
[ 8.217472] uhci_hcd 0000:00:01.2: sharing IRQ 10 with 0000:00:09.0 | |
[ 8.217560] uhci_hcd 0000:00:01.2: UHCI Host Controller | |
[ 8.217787] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 | |
[ 8.219550] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000d800 | |
[ 8.220264] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 | |
[ 8.220309] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 8.220350] usb usb1: Product: UHCI Host Controller | |
[ 8.220382] usb usb1: Manufacturer: Linux 2.6.32-5-486 uhci_hcd | |
[ 8.220417] usb usb1: SerialNumber: 0000:00:01.2 | |
[ 8.222434] usb usb1: configuration #1 chosen from 1 choice | |
[ 8.223752] hub 1-0:1.0: USB hub found | |
[ 8.223937] hub 1-0:1.0: 2 ports detected | |
[ 8.374649] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GWA4164B, D108, max UDMA/33 | |
[ 8.390679] ata2.00: configured for UDMA/33 | |
[ 8.430394] ata1.00: ATA-2: ST34342A, 0.42, max UDMA/33 | |
[ 8.430436] ata1.00: 8404830 sectors, multi 16: LBA | |
[ 8.470438] ata1.00: configured for UDMA/33 | |
[ 8.471672] scsi 0:0:0:0: Direct-Access ATA ST34342A 0.42 PQ: 0 ANSI: 5 | |
[ 8.478981] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GWA4164B D108 PQ: 0 ANSI: 5 | |
[ 8.750428] sd 0:0:0:0: [sda] 8404830 512-byte logical blocks: (4.30 GB/4.00 GiB) | |
[ 8.751777] sd 0:0:0:0: [sda] Write Protect is off | |
[ 8.751824] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 | |
[ 8.752381] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA | |
[ 8.758783] sda: sda1 sda2 sda3 | |
[ 8.818968] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray | |
[ 8.819011] Uniform CD-ROM driver Revision: 3.20 | |
[ 8.824416] sr 1:0:0:0: Attached scsi CD-ROM sr0 | |
[ 8.841592] sd 0:0:0:0: [sda] Attached SCSI disk | |
[ 9.065088] sd 0:0:0:0: Attached scsi generic sg0 type 0 | |
[ 9.069189] sr 1:0:0:0: Attached scsi generic sg1 type 5 | |
[ 11.571431] PM: Starting manual resume from disk | |
[ 11.571476] PM: Resume from partition 8:3 | |
[ 11.571500] PM: Checking hibernation image. | |
[ 11.602997] PM: Error -22 checking image file | |
[ 11.603028] PM: Resume from disk failed. | |
[ 12.113657] EXT4-fs (sda2): mounted filesystem with ordered data mode | |
[ 15.953056] udev[186]: starting version 164 | |
[ 18.332694] input: PC Speaker as /devices/platform/pcspkr/input/input1 | |
[ 18.391856] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xe800, revision 0 | |
[ 18.480734] parport_pc 00:01: reported by Plug and Play BIOS | |
[ 18.480997] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] | |
[ 20.095951] Error: Driver 'pcspkr' is already registered, aborting... | |
[ 22.470458] Adding 148472k swap on /dev/sda3. Priority:-1 extents:1 across:148472k | |
[ 24.207734] loop: module loaded | |
[ 26.883241] kjournald starting. Commit interval 5 seconds | |
[ 26.885912] EXT3 FS on sda1, internal journal | |
[ 26.885963] EXT3-fs: mounted filesystem with ordered data mode. | |
[ 31.081148] 0000:00:09.0: tulip_stop_rxtx() failed (CSR5 0xfc660000 CSR6 0x320e2202) | |
[ 31.081206] eth0: Setting full-duplex based on MII#5 link partner capability of 8de1. | |
[ 38.778592] eth0: no IPv6 routers present |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment