Skip to content

Instantly share code, notes, and snippets.

@psyke83
Created August 15, 2012 14:45
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save psyke83/3360727 to your computer and use it in GitHub Desktop.
Save psyke83/3360727 to your computer and use it in GitHub Desktop.
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 2.6.35.7-perf-CL1095098 (conn@studio1558) (gcc version 4.4.3 (GCC) ) #5 PREEMPT Wed Aug 15 15:19:43 IST 2012
<4>[ 0.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f
<4>[ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: GT-I5500 Board
<6>[ 0.000000] Partition (from atag) mibib -- Offset:0 Size:6
<6>[ 0.000000] Partition (from atag) qcsbl -- Offset:6 Size:2
<6>[ 0.000000] Partition (from atag) oemsbl -- Offset:8 Size:3
<6>[ 0.000000] Partition (from atag) amss -- Offset:b Size:64
<6>[ 0.000000] Partition (from atag) efs2 -- Offset:6f Size:61
<6>[ 0.000000] Partition (from atag) nv_backup -- Offset:d0 Size:14
<6>[ 0.000000] Partition (from atag) fota -- Offset:e4 Size:64
<6>[ 0.000000] Partition (from atag) arm11boot -- Offset:148 Size:8
<6>[ 0.000000] Partition (from atag) boot -- Offset:150 Size:28
<6>[ 0.000000] Partition (from atag) recovery -- Offset:178 Size:28
<6>[ 0.000000] Partition (from atag) parameter -- Offset:1a0 Size:3
<6>[ 0.000000] Partition (from atag) system -- Offset:1a3 Size:2c6
<6>[ 0.000000] Partition (from atag) userdata -- Offset:469 Size:307
<6>[ 0.000000] Partition (from atag) cache -- Offset:770 Size:64
<4>[ 0.000000] Europa H/W revision : 0x04
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[ 0.000000] On node 0 totalpages: 54528
<7>[ 0.000000] free_area_init_node: node 0, pgdat c074cc68, node_mem_map c0976000
<7>[ 0.000000] Normal zone: 426 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 54102 pages, LIFO batch:15
<6>[ 0.000000] allocating 10485760 bytes at c1183000 (1383000 physical) for mdp pmem arena
<6>[ 0.000000] allocating 7860224 bytes at c1b83000 (1d83000 physical) for adsp pmem arena
<6>[ 0.000000] allocating 372736 bytes (at 80000 physical) for audio pmem arena
<6>[ 0.000000] allocating 655360 bytes at c2302000 (2502000 physical) for fb
<6>[ 0.000000] allocating 114688 bytes at c2400000 (2600000 physical) for kernel ebi1 pmem arena
<3>[ 0.000000] smem_find(137, 64): wrong size 56
<6>[ 0.000000] socinfo_init: v2, id=67, ver=1.2, raw_id=961, raw_ver=2
<6>[ 0.000000] L210 cache controller enabled
<1>[ 0.000000] Initialized strongly ordered page successfully
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 54102
<5>[ 0.000000] Kernel command line: mem=213M console=NULL hw=4 fbaddr=0xd4000
<6>[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.000000] Memory: 213MB = 213MB total
<5>[ 0.000000] Memory: 186296k/186296k available, 31816k reserved, 0K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
<5>[ 0.000000] vmalloc : 0xcd800000 - 0xfa000000 ( 712 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xcd500000 ( 213 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc0031000 ( 164 kB)
<5>[ 0.000000] .text : 0xc0031000 - 0xc06ed000 (6896 kB)
<5>[ 0.000000] .data : 0xc06ee000 - 0xc07598a0 ( 431 kB)
<6>[ 0.000000] Hierarchical RCU implementation.
<6>[ 0.000000] RCU-based detection of stalled CPUs is disabled.
<6>[ 0.000000] Verbose stalled-CPUs detection is disabled.
<6>[ 0.000000] NR_IRQS:261
<4>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.000354] Calibrating delay loop... 599.65 BogoMIPS (lpj=2998272)
<6>[ 0.220181] pid_max: default: 32768 minimum: 301
<4>[ 0.220466] Mount-cache hash table entries: 512
<6>[ 0.220966] Initializing cgroup subsys cpuacct
<6>[ 0.220991] Initializing cgroup subsys freezer
<6>[ 0.221026] CPU: Testing write buffer coherency: ok
<6>[ 0.223411] NET: Registered protocol family 16
<6>[ 0.224243] acpu_clock_init()
<6>[ 0.224263] Shared PLL control available.
<6>[ 0.224481] L val: PLL0: 50, PLL1: 12, PLL2: 63
<6>[ 0.224594] ACPU running at 604800 KHz
<6>[ 0.224616] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2
<6>[ 0.224648] 0 19200 -1 1 19200 1 30720 -1 -1 -1 1 4 3
<6>[ 0.224676] 1 120000 0 8 60000 2 61440 -1 -1 -1 5 4 3
<6>[ 0.224706] 2 122880 1 2 61440 2 61440 1 -1 -1 5 4 3
<6>[ 0.224734] 3 201600 2 6 67200 3 61440 1 2 -1 5 4 6
<6>[ 0.224764] 4 245760 1 1 122880 2 61440 1 2 3 7 -1 6
<6>[ 0.224793] 5 320000 0 3 160000 2 160000 1 2 3 7 -1 6
<6>[ 0.224823] 6 403200 2 3 201600 2 200000 5 4 3 11 -1 8
<6>[ 0.224853] 7 480000 0 2 240000 2 200000 5 4 6 15 -1 8
<6>[ 0.224883] 8 604800 2 2 302400 2 200000 7 -1 6 17 -1 -1
<6>[ 0.224911] 9 614400 0 1 307200 2 200000 7 -1 6 17 -1 -1
<6>[ 0.224941] 10 633600 0 1 316800 2 200000 7 -1 6 17 -1 -1
<6>[ 0.224969] 11 652800 0 1 326400 2 200000 7 -1 6 17 -1 -1
<6>[ 0.224999] 12 672000 0 1 336000 2 200000 7 -1 8 17 -1 -1
<6>[ 0.225029] 13 691200 0 1 345600 2 200000 7 -1 8 17 -1 -1
<6>[ 0.225058] 14 710400 0 1 355200 2 200000 7 -1 8 17 -1 -1
<6>[ 0.225088] 15 729600 0 1 364800 2 200000 7 -1 8 17 -1 -1
<6>[ 0.225118] 16 748800 0 1 374400 2 200000 9 -1 8 17 -1 -1
<6>[ 0.225146] 17 768000 0 1 384000 2 200000 9 -1 8 -1 -1 -1
<6>[ 0.225166] 14 scaling frequencies supported.
<6>[ 0.227324] msm7x2x_init : msm7x2x_init #####
<3>[ 0.228488] Error configuraing GPIO_WLAN_HOST_WAKE
<6>[ 0.228693] hw perfevents: enabled with v6 PMU driver, 3 counters available
<4>[ 0.237099] bio: create slab <bio-0> at 0
<5>[ 0.238136] SCSI subsystem initialized
<6>[ 0.238326] usbcore: registered new interface driver usbfs
<6>[ 0.238456] usbcore: registered new interface driver hub
<6>[ 0.238628] usbcore: registered new device driver usb
<6>[ 0.239004] i2c-gpio i2c-gpio.2: using pins 23 (SDA) and 30 (SCL)
<6>[ 0.239233] i2c-gpio i2c-gpio.3: using pins 91 (SDA) and 90 (SCL)
<6>[ 0.239336] msm_i2c_probe
<6>[ 0.239451] msm_i2c_probe: clk_ctl 316, 384000 Hz
<6>[ 0.240544] Advanced Linux Sound Architecture Driver Version 1.0.23.
<6>[ 0.241126] Bluetooth: Core ver 2.15
<6>[ 0.241206] NET: Registered protocol family 31
<6>[ 0.241221] Bluetooth: HCI device and connection manager initialized
<6>[ 0.241241] Bluetooth: HCI socket layer initialized
<6>[ 0.241418] Switching to clocksource dg_timer
<6>[ 0.249698] NET: Registered protocol family 2
<6>[ 0.249919] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.250583] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.250854] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>[ 0.251023] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 0.251041] TCP reno registered
<6>[ 0.251061] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.251096] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.251341] NET: Registered protocol family 1
<6>[ 0.251739] RPC: Registered udp transport module.
<6>[ 0.251758] RPC: Registered tcp transport module.
<6>[ 0.251773] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 0.252056] Trying to unpack rootfs image as initramfs...
<6>[ 0.446153] Freeing initrd memory: 1544K
<6>[ 0.447828] smd probe
<6>[ 0.447856] smd_core_init()
<6>[ 0.447956] smd_core_init() done
<6>[ 0.447976] smd_alloc_loopback_channel: 'local_loopback' cid=100
<6>[ 0.449411] smd_alloc_channel() 'DS' cid=0
<6>[ 0.449573] smd_alloc_channel() 'RPCCALL' cid=2
<6>[ 0.449706] smd_alloc_channel() 'DATA1' cid=7
<6>[ 0.449831] smd_alloc_channel() 'DATA2' cid=8
<6>[ 0.449943] smd_alloc_channel() 'DATA3' cid=9
<6>[ 0.450053] smd_alloc_channel() 'DATA4' cid=10
<6>[ 0.450164] smd_alloc_channel() 'DATA5' cid=11
<6>[ 0.450291] smd_alloc_channel() 'DATA6' cid=12
<6>[ 0.450406] smd_alloc_channel() 'DATA7' cid=13
<6>[ 0.450518] smd_alloc_channel() 'DATA11' cid=17
<6>[ 0.450641] smd_alloc_channel() 'DAL00' cid=38
<6>[ 0.450754] smd_alloc_channel() 'DATA5_CNTL' cid=39
<6>[ 0.450879] smd_alloc_channel() 'DATA6_CNTL' cid=40
<6>[ 0.450998] smd_alloc_channel() 'DATA7_CNTL' cid=41
<3>[ 0.451219] Notify: smsm init
<6>[ 0.454324] SMD Packet Port Driver Initialized.
<6>[ 0.454979] SMD: ch 2 0 -> 1
<6>[ 0.455103] SMD: ch 2 1 -> 2
<6>[ 0.455511] [adsp.c:adsp_init] rs3000000a -- 0
<6>[ 0.456331] [audpp.c:audpp_probe] Number of decoder supported 5
<6>[ 0.456353] [audpp.c:audpp_probe] Number of concurrency supported 8
<6>[ 0.456373] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[ 0.456389] [audpp.c:audpp_probe] queueid:13
<6>[ 0.456404] [audpp.c:audpp_probe] decid:0
<6>[ 0.456419] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.456434] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[ 0.456451] [audpp.c:audpp_probe] queueid:14
<6>[ 0.456466] [audpp.c:audpp_probe] decid:1
<6>[ 0.456481] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.456496] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[ 0.456513] [audpp.c:audpp_probe] queueid:15
<6>[ 0.456528] [audpp.c:audpp_probe] decid:2
<6>[ 0.456543] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.456559] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[ 0.456576] [audpp.c:audpp_probe] queueid:16
<6>[ 0.456591] [audpp.c:audpp_probe] decid:3
<6>[ 0.456606] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.456621] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[ 0.456638] [audpp.c:audpp_probe] queueid:17
<6>[ 0.456653] [audpp.c:audpp_probe] decid:4
<6>[ 0.456668] [audpp.c:audpp_probe] nr_codec_support:1
<4>[ 0.473708] THNAK YOU!!
<4>[ 0.473728] fe2f, b9c40000, 100
<4>[ 0.473803] [VIB] platform driver register result : 0
<6>[ 0.482284] [RR] - ver=1 type=2 src=0:fffffffe crx=0 siz=20 dst=0:fffffffe
<6>[ 0.482318] [RR] o HELLO PID 0
<6>[ 0.482996] [RR] x NEW_SERVER id=1:cd48f2a0 prog=3000005d:00000000
<6>[ 0.483171] [RR] x NEW_SERVER id=1:cd48f2a0 prog=3000005d:9202a8e4
<6>[ 0.483343] [RR] x NEW_SERVER id=1:cd48f2a0 prog=3000005d:00010002
<6>[ 0.483499] [RR] x NEW_SERVER id=1:cd48f2a0 prog=30000015:731fa727
<6>[ 0.483649] [RR] x NEW_SERVER id=1:cd48f2a0 prog=30000015:00010001
<6>[ 0.483811] [RR] x NEW_SERVER id=1:cd48f2a0 prog=30000082:00010001
<6>[ 0.483964] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
<6>[ 0.483999] [RR] o NEW_SERVER id=0:00000001 prog=30000081:00010002
<6>[ 0.484381] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
<6>[ 0.484408] [RR] o NEW_SERVER id=0:00000001 prog=30000061:00010001
<6>[ 0.484763] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
<6>[ 0.484789] [RR] o NEW_SERVER id=0:00000001 prog=30000003:d03123cc
<6>[ 0.485104] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
<6>[ 0.485131] [RR] o NEW_SERVER id=0:00000001 prog=30000060:00010002
<6>[ 0.485449] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
<6>[ 0.485474] [RR] o NEW_SERVER id=0:00000001 prog=3000005f:00010002
<6>[ 0.485804] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
<6>[ 0.485831] [RR] o NEW_SERVER id=0:00000001 prog=30000002:00020003
<6>[ 0.486306] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
<6>[ 0.486334] [RR] o NEW_SERVER id=0:00000001 prog=30000000:892a3c1c
<6>[ 0.486531] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
<6>[ 0.486558] [RR] o NEW_SERVER id=0:00000001 prog=3000001d:ba845703
<6>[ 0.486743] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
<6>[ 0.486768] [RR] o NEW_SERVER id=0:00000001 prog=3000005b:a60286b0
<6>[ 0.486936] [RR] o NEW_SERVER id=0:00000001 prog=3000003c:beb78360
<6>[ 0.489768] [RPC] READ on ept cd48f2a0
<6>[ 0.489798] [RPC] READ on ept cd48f2a0 (52 bytes)
<6>[ 0.489826] RPC_TIME_TOD_SET_APPS_BASES:
<6>[ 0.489836] tick = 75415
<6>[ 0.489843] stamp = 0
<3>[ 0.489863] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[ 0.489896] [RPC] REPLY to xid=0 @ 0:00000001 (24 bytes)
<6>[ 0.489914] [RPC] Writing 24 bytes, max pkt size is 500
<6>[ 0.489954] [RPC] Wrote 60 bytes First 1 Last 1 mid 2
<6>[ 0.492853] [RR] x NEW_SERVER id=1:cd48f0a0 prog=3000000b:00030002
<6>[ 0.493001] [RPC] READ on ept cd48f1a0
<6>[ 0.493072] [RPC] READ on ept cd48f2a0
<6>[ 0.493106] [RPC] READ on ept cd48f2a0 (52 bytes)
<6>[ 0.493134] RPC_TIME_TOD_SET_APPS_BASES:
<6>[ 0.493142] tick = 199390
<6>[ 0.493149] stamp = 53953203078692864
<3>[ 0.493169] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[ 0.493197] [RPC] REPLY to xid=1 @ 0:00000001 (24 bytes)
<6>[ 0.493216] [RPC] Writing 24 bytes, max pkt size is 500
<6>[ 0.493247] [RPC] Wrote 60 bytes First 1 Last 1 mid 3
<6>[ 0.498709] [RPC] READ on ept cd48f0a0
<6>[ 0.499137] ashmem: initialized
<7>[ 0.501092] yaffs built Aug 15 2012 13:43:16 Installing.
<6>[ 0.501154] msgmni has been set to 366
<6>[ 0.501396] alg: No test for cipher_null (cipher_null-generic)
<6>[ 0.501662] alg: No test for ecb(cipher_null) (ecb-cipher_null)
<6>[ 0.501804] alg: No test for digest_null (digest_null-generic)
<6>[ 0.501934] alg: No test for compress_null (compress_null-generic)
<6>[ 0.506969] alg: No test for stdrng (krng)
<6>[ 0.601311] io scheduler noop registered
<6>[ 0.601329] io scheduler deadline registered
<6>[ 0.601522] io scheduler cfq registered
<6>[ 0.601539] io scheduler sio registered (default)
<3>[ 0.602412] fbaddr cmdline is null
<6>[ 0.602946] msm_fb_probe: phy_Addr = 0x2502000 virt = 0xcd900000
<6>[ 0.603651] MDP HW Base phy_Address = 0xaa200000 virt = 0xcda00000
<4>[ 0.604499] s6d04m0 start lcdc_s6d04m0_panel_init
<4>[ 0.604557] s6d04m0 start s6d04m0_probe
<4>[ 0.604656] lcdc_s6d04m0_panel_init
<4>[ 0.631472] [HSIL] mdp_lcdc_on(118) mdp_lcdc_on start
<4>[ 0.631497] ==============++minhyodebug : LCD CONTROLLER Registers Setting
<4>[ 0.631517] display_hctl = 0x1030014
<4>[ 0.631529] display_v_start = 0x14f0
<4>[ 0.631539] display_v_end = 0x163ef
<4>[ 0.631549] lcdc_border_clr = 0x0
<4>[ 0.631561] lcdc_underflow_clr = 0xff
<4>[ 0.631571] lcdc_hsync_skew = 0x0
<4>[ 0.631581] ctrl_polarity = 0x0
<4>[ 0.631591] active_hctl = 0x0
<4>[ 0.631599] active_v_start = 0x0
<4>[ 0.631609] active_v_end = 0x0
<4>[ 0.631632] pc_clk_set_rate id : 42, rate : 8192000
<4>[ 0.631701] pc_clk_set_rate id : 0, rate : 8192000
<4>[ 0.631709] , rc : 0
<4>[ 0.632377] s6d04m0 start lcdc_s6d04m0_panel_on
<4>[ 0.632394] [HSIL] mdp_lcdc_on(331) mdp_lcdc_on end
<4>[ 0.661481] s6d04m0 lcdc_s6d04m0_set_backlight:255,30
<4>[ 0.661691] ldi mtpdata: 51 1c 11
<5>[ 0.661701] lcd type is sharp
<4>[ 0.681247] Console: switching to colour frame buffer device 30x40
<6>[ 0.692491] FrameBuffer[0] 240x320 size=655360 bytes is registered successfully!
<7>[ 0.692839] Registered led device: lcd-backlight
<6>[ 0.693486] [drm] Initialized drm 1.1.0 20060810
<6>[ 0.693776] msm_serial: driver initialized
<4>[ 0.693926] pc_clk_set_rate id : 34, rate : 7372800
<4>[ 0.693986] pc_clk_set_rate id : 0, rate : 7372800
<4>[ 0.693996] , rc : 0
<6>[ 0.694094] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<4>[ 0.694441] pc_clk_set_rate id : 35, rate : 7372800
<4>[ 0.694494] pc_clk_set_rate id : 0, rate : 7372800
<4>[ 0.694502] , rc : 0
<6>[ 0.694584] msm_serial_hs.1: ttyHS1 at MMIO 0xa0300000 (irq = 52) is a MSM HS UART
<6>[ 0.694929] msm_serial_hs module loaded
<6>[ 0.698296] brd: module loaded
<6>[ 0.702081] loop: module loaded
<6>[ 0.702264] pmem: Initializing pmem_kernel_ebi1 (in-kernel)
<6>[ 0.702374] pmem: Initializing pmem (user-space) as cached
<6>[ 0.703107] pmem: Initializing pmem_adsp (user-space) as non-cached
<6>[ 0.703647] pmem: Initializing pmem_audio (user-space) as non-cached
<6>[ 0.704066] sec_jack:sec_jack_probe : Registering jack driver
<6>[ 0.704366] input: sec_jack as /devices/virtual/input/input0
<6>[ 0.706099] msm_nand_probe: phys addr 0xa0a00000
<6>[ 0.706124] msm_nand_probe: dmac 0x7
<6>[ 0.706181] msm_nand_probe: allocated dma buffer at ffc10000, dma_addr c860000
<6>[ 0.706316] status: 20
<6>[ 0.706331] nandid: ff maker ff device 00
<3>[ 0.706354] ERROR: unknown nand device manuf=ff devid=0
<6>[ 0.706384] SFLASHC Async Mode bit: 0
<6>[ 0.706425] =================================================================
<6>[ 0.706445] flash_onenand_probe: manufacturer_id = 0xec
<6>[ 0.706460] flash_onenand_probe: device_id = 0x50
<6>[ 0.706475] flash_onenand_probe: version_id = 0x13e
<6>[ 0.706492] flash_onenand_probe: data_buf_size = 0x800
<6>[ 0.706507] flash_onenand_probe: boot_buf_size = 0x200
<6>[ 0.706524] flash_onenand_probe: num_of_buffers = 0x101
<6>[ 0.706539] flash_onenand_probe: technology = 0x0
<6>[ 0.706552] =================================================================
<6>[ 0.706572] Found a supported onenand device
<5>[ 0.706597] Creating 14 MTD partitions on "msm_nand":
<5>[ 0.706622] 0x000000000000-0x0000000c0000 : "mibib"
<6>[ 0.707099] mtd: Giving out device 0 to mibib
<5>[ 0.707812] 0x0000000c0000-0x000000100000 : "qcsbl"
<6>[ 0.708162] mtd: Giving out device 1 to qcsbl
<5>[ 0.708805] 0x000000100000-0x000000160000 : "oemsbl"
<6>[ 0.709182] mtd: Giving out device 2 to oemsbl
<5>[ 0.709810] 0x000000160000-0x000000de0000 : "amss"
<6>[ 0.711532] mtd: Giving out device 3 to amss
<5>[ 0.712192] 0x000000de0000-0x000001a00000 : "efs2"
<6>[ 0.713810] mtd: Giving out device 4 to efs2
<5>[ 0.714497] 0x000001a00000-0x000001c80000 : "nv_backup"
<6>[ 0.715082] mtd: Giving out device 5 to nv_backup
<5>[ 0.715752] 0x000001c80000-0x000002900000 : "fota"
<6>[ 0.717404] mtd: Giving out device 6 to fota
<5>[ 0.718077] 0x000002900000-0x000002a00000 : "arm11boot"
<6>[ 0.718517] mtd: Giving out device 7 to arm11boot
<5>[ 0.719209] 0x000002a00000-0x000002f00000 : "boot"
<6>[ 0.720079] mtd: Giving out device 8 to boot
<5>[ 0.720799] 0x000002f00000-0x000003400000 : "recovery"
<6>[ 0.721755] mtd: Giving out device 9 to recovery
<5>[ 0.722497] 0x000003400000-0x000003460000 : "parameter"
<6>[ 0.722894] mtd: Giving out device 10 to parameter
<5>[ 0.723524] 0x000003460000-0x000008d20000 : "system"
<6>[ 0.733304] mtd: Giving out device 11 to system
<5>[ 0.733942] 0x000008d20000-0x00000ee00000 : "userdata"
<6>[ 0.744612] mtd: Giving out device 12 to userdata
<5>[ 0.745252] 0x00000ee00000-0x00000fa80000 : "cache"
<6>[ 0.746927] mtd: Giving out device 13 to cache
<6>[ 0.747904] PPP generic driver version 2.4.2
<6>[ 0.748164] PPP Deflate Compression module registered
<6>[ 0.748180] PPP BSD Compression module registered
<6>[ 0.752424] PPP MPPE Compression module registered
<6>[ 0.752450] NET: Registered protocol family 24
<6>[ 0.752524] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>[ 0.752547] CSLIP: code copyright 1989 Regents of the University of California.
<4>[ 0.753187] rmnet_init
<4>[ 0.758384] pc_clk_set_rate id : 36, rate : 60000000
<4>[ 0.758439] pc_clk_set_rate id : -1, rate : 60000000
<4>[ 0.758449] , rc : 0
<3>[ 0.758902] msm_otg_probe: chg_init failed
<6>[ 0.759122] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.759252] host driver registered w/ tranceiver
<6>[ 0.759475] usbcore: registered new interface driver cdc_acm
<6>[ 0.759494] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[ 0.759587] usbcore: registered new interface driver usb_ehset_test
<6>[ 0.759900] peripheral driver registered w/ tranceiver
<6>[ 0.760309] DUN is registerd
<6>[ 0.760759] android_usb gadget: android_usb ready
<6>[ 0.760924] f_acm init
<6>[ 0.761615] acmdata_register
<4>[ 0.763690] android_usb gadget: using random self ethernet address
<4>[ 0.763727] android_usb gadget: using random host ethernet address
<6>[ 0.764314] usb0: MAC 0e:85:10:49:2e:b0
<6>[ 0.764332] usb0: HOST MAC 0a:9c:69:1e:31:44
<6>[ 0.764594] diagfwd initializing ..
<6>[ 0.765092] diagchar initializing ..
<6>[ 0.765345] diagchar initialized
<6>[ 0.765939] input: msm_touchscreen as /devices/platform/msm_touchscreen.0/input/input1
<4>[ 0.766387] [TSP] synaptics_ts_init
<4>[ 0.766562] [TSP] synaptics_ts_probe, 395
<6>[ 0.872374] synaptics_ts_probe: max_x: 240, max_y: 320
<6>[ 0.872674] input: synaptics-rmi-touchscreen as /devices/virtual/input/input2
<4>[ 0.872860] [TSP] synaptics_ts_probe, irq=83
<6>[ 0.872984] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode
<4>[ 0.873167] [TSP] synaptics_ts_probe, ver CY=a0
<4>[ 0.873184] [TSP] synaptics_ts_probe, ver HW=2
<4>[ 0.873199] [TSP] synaptics_ts_probe, ver SW=9
<4>[ 0.873380] [gpio_event_matrix_func:625] hw rev = 4
<6>[ 0.873654] GPIO Matrix Keypad Driver: Start keypad matrix for europa_keypad0 in interrupt mode
<6>[ 0.873980] input: europa_keypad0 as /devices/virtual/input/input3
<7>[ 0.874990] RTC Registering with rs30000048
<6>[ 0.876475] [RPC] READ on ept cc690560
<6>[ 0.876535] [RPC] CALL to 30000048:65537 @ 0:00000001 (56 bytes)
<6>[ 0.876557] [RPC] Writing 56 bytes, max pkt size is 500
<6>[ 0.876604] [RPC] Wrote 92 bytes First 1 Last 1 mid 4
<6>[ 0.877234] [RPC] READ on ept cc690560 (24 bytes)
<6>[ 0.877260] [RPC] READ on ept cc690560
<3>[ 0.877284] msm_rpc_client_req: RPC call was not successful (3)
<7>[ 0.877304] msmrtc_setup_cb: RPC client registration for PROC:12 failed
<7>[ 0.877324] rs30000048 rs30000048.65536: msmrtc_probe: Could not initialize RPC callback
<6>[ 0.877922] using rtc device, msm_rtc, for alarms
<7>[ 0.877944] msm_rtc: dev (254:0)
<6>[ 0.877995] rs30000048 rs30000048.65536: rtc core: registered msm_rtc as rtc0
<7>[ 0.878205] msm_rtc_secure: dev (254:1)
<6>[ 0.878224] rs30000048 rs30000048.65536: rtc core: registered msm_rtc_secure as rtc1
<6>[ 0.878312] i2c /dev entries driver
<6>[ 0.879040] [FSA9280]: probe
<6>[ 0.879054] [FSA9280]: init
<4>[ 0.880144] [FSA9280]: Initial control reg 0x02 : 0x1e
<6>[ 0.891510] [FSA9280]: fsa9280 sensor init sequence done
<6>[ 0.891552] [FSA9280]: irq active
<4>[ 0.891567] fsa9280_interrupt_handler : This interrupt will be dropped
<6>[ 0.891584] [FSA9280]: irq release
<6>[ 0.891662] [FSA9280]: probe complete
<4>[ 0.892020] [bma_probe] slave addr = 38
<6>[ 0.892284] Bosch Sensortec Device detected!
<6>[ 0.892294] BMA023 registered I2C driver!
<6>[ 0.892487] bma accel device create ok
<4>[ 0.892634] registering lightsensor-level input device
<6>[ 0.892929] input: accelerometer_sensor as /devices/virtual/input/input4
<6>[ 0.894252] mmc31xx driver: init
<3>[ 0.894450] [mmc31xx_probe] +
<3>[ 0.911485] [mmc31xx_probe] -
<6>[ 0.911557] ecompass driver: init
<6>[ 0.911852] input: magnetic_sensor as /devices/virtual/input/input5
<6>[ 0.912165] Linux video capture interface: v2.00
<4>[ 0.912228] sr200pc10_init
<4>[ 0.912345] _sr200pc10_probe
<4>[ 0.912408] config_camera_on_gpios --enter
<4>[ 0.913118] <=PCAM=> cam_pw start
<4>[ 0.914840] pc_clk_set_rate id : 41, rate : 24000000
<4>[ 0.914935] pc_clk_set_rate id : 0, rate : 24000000
<4>[ 0.914945] , rc : 0
<4>[ 0.919878] <=PCAM=> cam_pw start
<4>[ 0.921358] msm_sync_init: initialized sr200pc10
<4>[ 0.921993] [Battery] msm_batt_init
<3>[ 0.922218] [Battery] msm_batt_probe
<6>[ 0.922867] [RPC] CALL to 30000089:65539 @ 0:00000001 (64 bytes)
<6>[ 0.922887] [RPC] Writing 64 bytes, max pkt size is 500
<6>[ 0.922930] [RPC] Wrote 100 bytes First 1 Last 1 mid 5
<6>[ 0.922948] [RPC] READ on ept cc690160
<6>[ 0.923635] [RPC] READ on ept cc690160 (28 bytes)
<6>[ 0.923657] batt_clnt_handle = 0
<6>[ 0.923790] [RPC] CALL to 30000089:65539 @ 0:00000001 (52 bytes)
<6>[ 0.923808] [RPC] Writing 52 bytes, max pkt size is 500
<6>[ 0.923840] [RPC] Wrote 88 bytes First 1 Last 1 mid 6
<6>[ 0.923857] [RPC] READ on ept cc690160
<6>[ 0.924188] [RR] o RESUME_TX id=0:00000001
<6>[ 0.924563] [RPC] READ on ept cc690160 (28 bytes)
<6>[ 0.924583] msm_batt_enable_filter: vbatt Filter enabled successfully.
<3>[ 0.956950] [Battery] get_charger_type charger_type is (2)
<4>[ 0.956970] [Battery] get_charger_type : wake_lock!!! !!!!
<4>[ 0.957017] [Battery] Check VF value [0x0] (when first charger connected!)
<4>[ 0.957242] [Battery] get_charging_status : event_flag =8
<4>[ 0.957897] [Battery] Charging state is changed [ff]=>[5] Batt Level [3739] Percent [100]
<6>[ 0.960478] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
<6>[ 0.960788] device-mapper: multipath: version 1.1.1 loaded
<6>[ 0.960810] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[ 0.960830] device-mapper: multipath queue-length: version 0.1.0 loaded
<6>[ 0.960848] device-mapper: multipath service-time: version 0.2.0 loaded
<6>[ 0.961165] Bluetooth: HCI UART driver ver 2.2
<6>[ 0.961182] Bluetooth: HCI H4 protocol initialized
<6>[ 0.961197] Bluetooth: HCI BCSP protocol initialized
<6>[ 0.961632] Bluetooth: MSM Sleep Mode Driver Ver 1.1
<6>[ 0.962303] [imoseyon] interactivex enter
<4>[ 0.962837] pc_clk_set_rate id : 19, rate : 144000
<4>[ 0.962893] pc_clk_set_rate id : 0, rate : 144000
<4>[ 0.962903] , rc : 0
<6>[ 0.963502] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,113 dma 8
<6>[ 0.963522] mmc0: 8 bit data mode disabled
<6>[ 0.963537] mmc0: 4 bit data mode enabled
<6>[ 0.963550] mmc0: polling status mode disabled
<6>[ 0.963568] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
<6>[ 0.963585] mmc0: Slot eject status = 0
<6>[ 0.963600] mmc0: Power save feature enable = 1
<6>[ 0.963618] mmc0: DM non-cached buffer at ffc14000, dma_addr 0x0c933000
<6>[ 0.963638] mmc0: DM cmd busaddr 0x0c933000, cmdptr busaddr 0x0c933300
<4>[ 0.963830] pc_clk_set_rate id : 21, rate : 144000
<4>[ 0.963880] pc_clk_set_rate id : 0, rate : 144000
<4>[ 0.963890] , rc : 0
<6>[ 0.964278] mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,0 dma 8
<6>[ 0.964297] mmc1: 8 bit data mode disabled
<6>[ 0.964310] mmc1: 4 bit data mode enabled
<6>[ 0.964323] mmc1: polling status mode disabled
<6>[ 0.964342] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
<6>[ 0.964358] mmc1: Slot eject status = 1
<6>[ 0.964372] mmc1: Power save feature enable = 1
<6>[ 0.964388] mmc1: DM non-cached buffer at ffc15000, dma_addr 0x0c94c000
<6>[ 0.964410] mmc1: DM cmd busaddr 0x0c94c000, cmdptr busaddr 0x0c94c300
<6>[ 0.966032] usbcore: registered new interface driver usbhid
<6>[ 0.966048] usbhid: USB HID core driver
<6>[ 1.071592]
<6>[ 1.071600] ========== kernel thread : gaf-proc ==========
<6>[ 1.071618] task_struct at cc750cc0
<6>[ 1.071630] thread_info at cc75e000
<6>[ 1.071638]
<6>[ 1.071648] saved_cpu_context at cc75e01c
<6>[ 1.071668] cc75e01c r4 :cc750cc0 r5 :cc75e000 r6 :c06fed88 r7 :00000000
<6>[ 1.071693] cc75e02c r8 :c070791c r9 :cc6a2c60 r10:c06f1070 r11:cc75ff0c
<6>[ 1.071713] cc75e03c sp :cc75fed8 pc :c051271c
<6>[ 1.071723]
<6>[ 1.071737] searching saved pc which is stopped in schedule_timeout() from cc75fed8 to cc760000
<6>[ 1.071760] schedule_timeout() is from c0512e34 to c0513068
<6>[ 1.071770]
<6>[ 1.071783] pc (c0512e58) is found at cc75fedc
<6>[ 1.071802] cc75feb0 r4 :xxxxxxxx r5 :cc75fec0 r6 :c00c56f8 r7 :c00c5684
<6>[ 1.071825] cc75fec0 r8 :00000000 r9 :c06f1070 r10:cc75ff0c r11:cc75fed8
<6>[ 1.071850] cc75fed0 r12:c0031ea4 sp :c00c56e4 lr :ffd225b9 pc :c0512e58
<6>[ 1.071865] ===================
<6>[ 1.071873]
<6>[ 1.072088] logger: created 512K log 'log_main'
<6>[ 1.072253] logger: created 256K log 'log_events'
<6>[ 1.072417] logger: created 256K log 'log_radio'
<6>[ 1.072578] logger: created 256K log 'log_system'
<4>[ 1.074375] [Silent Value] : 0
<4>[ 1.075107] No device for DAI CODEC_DAI
<4>[ 1.075125] No device for DAI CPU_DAI
<3>[ 1.075372] msm_soc: create pcms
<6>[ 1.075697] asoc: CODEC_DAI <-> CPU_DAI mapping ok
<3>[ 1.075715] msm_soc: ALSA MSM Mixer Setting
<6>[ 1.076498] ALSA device list:
<6>[ 1.076513] #0: msm-audio (MSM-CARD)
<6>[ 1.076642] Netfilter messages via NETLINK v0.30.
<6>[ 1.076755] nf_conntrack version 0.5.0 (2935 buckets, 11740 max)
<4>[ 1.077037] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[ 1.077057] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[ 1.077075] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<6>[ 1.077318] xt_time: kernel timezone is -0000
<6>[ 1.077390] IPv4 over IPv4 tunneling driver
<6>[ 1.078055] GRE over IPv4 tunneling driver
<6>[ 1.078842] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.079082] TCP cubic registered
<6>[ 1.079437] NET: Registered protocol family 10
<6>[ 1.082222] IPv6 over IPv4 tunneling driver
<6>[ 1.083077] NET: Registered protocol family 17
<6>[ 1.083138] NET: Registered protocol family 15
<6>[ 1.083362] Bluetooth: L2CAP ver 2.14
<6>[ 1.083377] Bluetooth: L2CAP socket layer initialized
<6>[ 1.083402] Bluetooth: SCO (Voice Link) ver 0.6
<6>[ 1.083415] Bluetooth: SCO socket layer initialized
<6>[ 1.083533] Bluetooth: RFCOMM TTY layer initialized
<6>[ 1.083558] Bluetooth: RFCOMM socket layer initialized
<6>[ 1.083575] Bluetooth: RFCOMM ver 1.11
<6>[ 1.083590] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 1.083605] Bluetooth: BNEP filters: protocol multicast
<6>[ 1.083622] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 1.086273] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<6>[ 1.099353] [drm] Initialized kgsl 2.1.1 20100127 on minor 0
<6>[ 1.105432] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<6>[ 1.105458] [RPC] Writing 44 bytes, max pkt size is 500
<6>[ 1.105507] [RPC] Wrote 80 bytes First 1 Last 1 mid 7
<6>[ 1.106172] [RPC] READ on ept cc690560 (56 bytes)
<6>[ 1.106202] [RPC] READ on ept cc690560
<7>[ 1.106237] msmrtc_tod_proc_result: 08/15/2012 14:21:33 (02)
<6>[ 1.106283] rs30000048 rs30000048.65536: setting system clock to 2012-08-15 14:21:33 UTC (1345040493)
<6>[ 1.106313] msm_v4l2: msm_v4l2_init
<4>[ 1.113042] multipdp_init:multipdp_rx_noti_regi calling
<4>[ 1.113557] Warning: unable to open an initial console.
<6>[ 1.113632] Freeing init memory: 164K
<4>[ 1.232818] pdp_activate(): ttyCSD(id: 1) serial device is created.
<4>[ 1.233105] pdp_activate(): ttyEFS(id: 8) serial device is created.
<4>[ 1.233376] pdp_activate(): ttyGPS(id: 5) serial device is created.
<4>[ 1.233791] pdp_activate(): ttyXTRA(id: 6) serial device is created.
<4>[ 1.234040] pdp_activate(): ttySMD(id: 25) serial device is created.
<3>[ 1.286065] init: cannot open '/initlogo.rle'
<3>[ 1.308855] init: Unable to open persistent property directory /data/property errno: 2
<4>[ 1.473593] [config_buf] [361] acm
<4>[ 1.473616] [config_buf] [361] acm
<4>[ 1.473633] [config_buf] [361] diag
<4>[ 1.473648] [config_buf] [361] usb_mass_storage
<4>[ 1.473666] [config_buf] [361] adb
<4>[ 1.540293] [config_buf] [361] acm
<4>[ 1.540316] [config_buf] [361] acm
<4>[ 1.540333] [config_buf] [361] diag
<4>[ 1.540348] [config_buf] [361] usb_mass_storage
<4>[ 1.540366] [config_buf] [361] adb
<4>[ 1.540831] [config_buf] [361] acm
<4>[ 1.540846] [config_buf] [361] acm
<4>[ 1.540861] [config_buf] [361] diag
<4>[ 1.540876] [config_buf] [361] usb_mass_storage
<4>[ 1.540893] [config_buf] [361] adb
<6>[ 1.541413] android_usb gadget: high speed config #1: android
<4>[ 1.541436] acm_set_alt 423
<4>[ 1.541461] acm_disconnected
<4>[ 1.541475] acm_set_alt 438
<7>[ 1.541640] diag: USB connected
<6>[ 1.541700] [RPC] CALL to 30000064:65538 @ 0:00000001 (44 bytes)
<6>[ 1.541720] [RPC] Writing 44 bytes, max pkt size is 500
<6>[ 1.541768] [RPC] Wrote 80 bytes First 1 Last 1 mid 8
<6>[ 1.541788] [RPC] READ on ept cc690c60
<6>[ 1.542435] [RPC] READ on ept cc690c60 (24 bytes)
<6>[ 1.542466] [RPC] CALL to 30000064:65538 @ 0:00000001 (44 bytes)
<6>[ 1.542486] [RPC] Writing 44 bytes, max pkt size is 500
<6>[ 1.542516] [RPC] Wrote 80 bytes First 1 Last 1 mid 9
<6>[ 1.543015] [RPC] READ on ept cc690c60 (24 bytes)
<6>[ 1.543041] [RPC] CALL to 30000064:65538 @ 0:00000001 (64 bytes)
<6>[ 1.543060] [RPC] Writing 64 bytes, max pkt size is 500
<6>[ 1.543088] [RPC] Wrote 100 bytes First 1 Last 1 mid 10
<6>[ 1.543568] [RPC] READ on ept cc690c60 (24 bytes)
<3>[ 1.543599] msm_hsusb_send_serial_number: rpc call failed! error: -22
<4>[ 1.550761] pc_clk_set_rate id : 19, rate : 49152000
<4>[ 1.550851] pc_clk_set_rate id : 0, rate : 49152000
<4>[ 1.550861] , rc : 0
<4>[ 1.550939] mmc0: host does not support reading read-only switch. assuming write-enable.
<6>[ 1.550979] mmc0: new high speed SD card at address 0002
<6>[ 1.553368] mmcblk0: mmc0:0002 00000 954 MiB
<6>[ 1.553761] mmcblk0: p1 p2 p3
<4>[ 1.940848] fsg_setup 637 w_index = 3 fsg->interface_number 3
<6>[ 2.231519]
<6>[ 2.231536] Charger Type: STD DOWNSTREAM PORT
<7>[ 6.994124] diag: USB disconnected
<4>[ 7.118325] [config_buf] [361] acm
<4>[ 7.118369] [config_buf] [361] acm
<4>[ 7.118405] [config_buf] [361] diag
<4>[ 7.118442] [config_buf] [361] usb_mass_storage
<4>[ 7.118482] [config_buf] [361] adb
<4>[ 7.810992] [config_buf] [361] acm
<4>[ 7.811029] [config_buf] [361] acm
<4>[ 7.811064] [config_buf] [361] diag
<4>[ 7.811100] [config_buf] [361] usb_mass_storage
<4>[ 7.811139] [config_buf] [361] adb
<4>[ 7.813532] [config_buf] [361] acm
<4>[ 7.813569] [config_buf] [361] acm
<4>[ 7.813604] [config_buf] [361] diag
<4>[ 7.813640] [config_buf] [361] usb_mass_storage
<4>[ 7.813679] [config_buf] [361] adb
<6>[ 7.826045] android_usb gadget: high speed config #1: android
<4>[ 7.826097] acm_set_alt 423
<4>[ 7.826142] acm_disconnected
<4>[ 7.826172] acm_set_alt 438
<7>[ 7.826312] diag: USB connected
<6>[ 7.826417] [RPC] CALL to 30000064:65538 @ 0:00000001 (44 bytes)
<6>[ 7.826465] [RPC] Writing 44 bytes, max pkt size is 500
<6>[ 7.826552] [RPC] Wrote 80 bytes First 1 Last 1 mid 11
<4>[ 7.826595] __msm_rpc_read: 2 callbacks suppressed
<6>[ 7.826635] [RPC] READ on ept cc690c60
<4>[ 7.826784] do_read_data: 28 callbacks suppressed
<6>[ 7.826842] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
<6>[ 7.826909] [RR] o RESUME_TX id=0:00000001
<6>[ 7.827330] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:cc690c60
<6>[ 7.827474] [RPC] READ on ept cc690c60 (24 bytes)
<6>[ 7.827537] [RPC] CALL to 30000064:65538 @ 0:00000001 (44 bytes)
<6>[ 7.827582] [RPC] Writing 44 bytes, max pkt size is 500
<6>[ 7.827650] [RPC] Wrote 80 bytes First 1 Last 1 mid 12
<6>[ 7.827689] [RPC] READ on ept cc690c60
<6>[ 7.828085] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=28 dst=1:cc690c60
<6>[ 7.828177] [RR] x RESUME_TX id=1:cc690c60
<6>[ 7.828260] [RPC] READ on ept cc690c60 (24 bytes)
<6>[ 7.828324] [RPC] CALL to 30000064:65538 @ 0:00000001 (64 bytes)
<6>[ 7.828389] [RPC] Writing 64 bytes, max pkt size is 500
<6>[ 7.828455] [RPC] Wrote 100 bytes First 1 Last 1 mid 13
<6>[ 7.828494] [RPC] READ on ept cc690c60
<6>[ 7.828885] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:cc690c60
<6>[ 7.829002] [RPC] READ on ept cc690c60 (24 bytes)
<3>[ 7.829052] msm_hsusb_send_serial_number: rpc call failed! error: -22
<4>[ 8.851095] fsg_setup 637 w_index = 3 fsg->interface_number 3
<3>[ 10.951553] [Battery] msm_batt_check_event (init_skip)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment